* Debug Mode: support basic difftest with spike

* Debug Mode: fix some bugs

Bugs fixed are:
1. All interrupts and exceptions cause debug mode to enter park loop
2. Debug interrupt ignored due to flushPipe

This commit adds fused load support by bypassing LUI results to load.

For better timing, detection is done at the rename stage. Imm is stored
in psrc(1), psrc(0) and imm.

This commit optimizes the coding style and timing for hardware
performance counters.

By default, performance counters are RegNext(RegNext(_)).

This commit changes how isFreed is calculated. Instead of using
refCounter in the next, we compute it at this cycle and RegNext it.

* mdp: implement SSIT with sram

* mdp: use robIdx instead of sqIdx

Dispatch refactor moves lsq enq to dispatch2, as a result, mdp can not
get correct sqIdx in dispatch. Unlike robIdx, it is hard to maintain a
"speculatively assigned" sqIdx, as it is hard to track store insts in
dispatch queue. Yet we can still use "speculatively assigned" robIdx
for memory dependency predictor.

For now, memory dependency predictor uses "speculatively assigned"
robIdx to track inflight store.

However, sqIdx is still used to track those store which's addr is valid
but data it not valid. When load insts try to get forward data from
those store, load insts will get that store's sqIdx and wait in RS.
They will not waken until store data with that sqIdx is issued.

* mdp: add track robIdx recover logic

* difftest: add basic difftest features for releases

This commit adds basic difftest features for every release, no matter
it's for simulation or physical design. The macro SYNTHESIS is used to
skip these logics when synthesizing the design. This commit aims at
allowing designs for physical design to be verified.

* bump ready-to-run

* difftest: add int and fp writeback data

This commit changes when instructions enter load/store queue.
Now, at dispatch2, load/store instructions enter load/store queue.

* Add perf counters
* add reg from hpm counter source
* add print perfcounter enable

This PR optimizes out isFused and crossPageIPFFix usages in Rob's DispatchData. They will not be stored in ROB. Now DispatchData has only 38 bits.

* isFused is merged with commitType (2 bits reduced)
* crossPageIPFFix is used only in ExceptionGen (1 bit reduced)
* rename: reduce ldest usages
* decode: set isMove to false if ldest is zero

This commit removes lsrc usages in the fence unit and lsrc is no longer
needed after an instruction is renamed. It helps timing and area.

lsrc is placed in imm at rename stage (the last stage we need lsrc).
They are extracted in the fence unit. Imm needs to go through the
pipelines because Jump needs it (and we re-use it for lsrc).

This commit optimizes the move elimination implementation.

Reference counting for every physical register is recorded. Originally
0-31 registers have counters of ones. Every time the physical register
is allocated or deallocated, the counter is increased or decreased by
one. When the counter becomes zero from a non-zero value, the register
is freed and released to freelist.

This commit removes flush IO for every module. Flush now re-uses
redirect ports to flush the instructions.

* bump chisel to 3.5.0-RC1

We don't want to use SNAPSHOT version any more because we don't know
what will happen when we wake up in the morning.

* misc: remove TMA_* to avoid conflicts

This commit optimizes RenameTable's timing.

Read addresses come from instruction buffer directly and has best
timing. So we let data read at decode stage and bypass write data
from this clock cycle to the read data at next cycle.

For write, we latch the write request and process it at the next cycle.

* rename Roq to Rob

* remove trailing whitespaces

* remove unused parameters

This commit adds timer counters for some important pipeline stages,
including rename, dispatch, dispatch2, select, issue, execute, commit.
We add performance counters for different types of instructions to see
the latency in different pipeline stages.

This commit adds some simple instruction fusion cases in decode stage.
Currently we only implement instruction pairs that can be fused into
RV64GCB instructions.

Instruction fusions are detected in the decode stage by FusionDecoder.
The decoder checks every two instructions and marks the first
instruction fused if they can be fused into one instruction. The second
instruction is removed by setting the valid field to false.

Simple fusion cases include sh1add, sh2add, sh3add, sexth, zexth, etc.

Currently, ftq in frontend needs every instruction to commit. However,
the second instruction is removed from the pipeline and will not commit.
To solve this issue, we temporarily add more bits to isFused to indicate
the offset diff of the two fused instruction. There are four
possibilities now. This feature may be removed later.

This commit also adds more instruction fusion cases that need changes
in both the decode stage and the funtion units. In this commit, we add
some opcode to the function units and fuse the new instruction pairs
into these new internal uops.

The list of opcodes we add in this commit is shown below:
- szewl1: `slli r1, r0, 32` + `srli r1, r0, 31`
- szewl2: `slli r1, r0, 32` + `srli r1, r0, 30`
- byte2: `srli r1, r0, 8` + `andi r1, r1, 255`
- sh4add: `slli r1, r0, 4` + `add r1, r1, r2`
- sr30add: `srli r1, r0, 30` + `add r1, r1, r2`
- sr31add: `srli r1, r0, 31` + `add r1, r1, r2`
- sr32add: `srli r1, r0, 32` + `add r1, r1, r2`
- oddadd: `andi r1, r0, 1`` + `add r1, r1, r2`
- oddaddw: `andi r1, r0, 1`` + `addw r1, r1, r2`
- orh48: mask off the first 16 bits and or with another operand
         (`andi r1, r0, -256`` + `or r1, r1, r2`)

Furthermore, this commit adds some complex instruction fusion cases to
the decode stage and function units. The complex instruction fusion cases
are detected after the instructions are decoded into uop and their
CtrlSignals are used for instruction fusion detection.

We add the following complex instruction fusion cases:
- addwbyte: addw and mask it with 0xff (extract the first byte)
- addwbit: addw and mask it with 0x1 (extract the first bit)
- logiclsb: logic operation and mask it with 0x1 (extract the first bit)
- mulw7: andi 127 and mulw instructions.
        Input to mul is AND with 0x7f if mulw7 bit is set to true.

* backend, rename: support elimination of mv inst whose lsrc=0
[known bug] instr page fault not properly raised after sfence.vma

* backend, roq: [bug fix] won't label me with exception as writebacked

MEFreeList: remove useless code + give specified
(instead of DontCare) value to phy reg allocated port

decode: slightly change def of `isMove`
[TODO] handle mv inst with lsrc=0

* Refactor print control transform

* Adda tilelink bus pmu

* Add performance counters for dispatch, issue, execute stages

* Add more counters in bus pmu

* Insert BusPMU between L3 and L2

* add some TMA perfcnt
Co-authored-by: NLinJiawei <linjiawei20s@ict.ac.cn>
Co-authored-by: NWilliam Wang <zeweiwang@outlook.com>
Co-authored-by: Nwangkaifan <wangkaifan@ict.ac.cn>

(finish refactoring) [TODO] remove useless code

        "trait" was used to improve code style
parameters: use EnableIntMoveElim to control code generation
[WIP] EnableIntMoveElim=false hasn't been tested

* Rename: add perf counter for move elimination
[NOTE] There are three reasons why one ME is cancelled:
  1. counter reaching max value
  2. RAW dependency with former instruction
  3. 2 move instruction with same psrc in 1 cycle

* Rename: add debug log + fix perf bug for move elim cancelation

* AlternativeFreeList: parameterize width of counter

* Rename:[bug fix] RAW conflict in meEnable decision
(suppose former inst=i while latter inst=j, i does
not have to be move instruction)

* Bundle, Rename: Add some comments
FreeList, RenameTable: Comment out unused variables

* refcnt: Implement AdderTree for reference counter

* build.sc: add testOne method for unit test

* AdderTest: add testbench for Adder (passed)

* AdderTree: Add testbench for AdderTree (passed)

* ReferenceCounter: implement a 2-bit counter

* Rename: remove redundant code

* Rename: prepared for move elimination [WIP]

* Roq: add eliminated move bit in roq entry;
  label elim move inst as writebacked
AlternativeFreeList: new impl for int free list
Rename: change io of free list
Dispatch1: (todo) not send move to intDq
Bundle: add eliminatedMove bit in roqCommitInfo, uop and debugio
ReferenceCounter: add debug print msg

* Dispatch1: [BUG FIX] not send move inst to IntDq

* DecodeUnit: [BUG FIX] differentiate li from mv

* Bug fix:
  1. Dispatch1: should not label pdest of move as busy in busy table
  2. Rename: use psrc0 to index bit vec isMax
  3. AlternativeFreeList: fix maxVec calculation logic and ref counter
     increment logic
Besides, more debug info and assertions were added.

* AlternativeFreeList Bug Fix:
  1. add redirect input - shouldn't allocate reg when redirect is
     valid
  2. handle duplicate preg in roqCommits in int free list

* AlternativeFreeList: Fix value assignment race condition

* Rename: Fix value assignment race condition too

* RenameTable: refactor spec/arch table write process

* Roq: Fix debug_exuData of move(addi) instruction
  (it was trash data before because move needn't enter exu)

* Rename: change intFreeList's redirect process
  (by setting headPtr back) and flush process

* ME: microbench & coremark & linux-hello passed
  1. DecodeUnit: treat `mv x,x` inst as non-move
  2. AlternativeFreeList: handle duplicate walk req correctly
  3. Roq: fix debug_exuData bug (make sure writeback that updates
debug_exuData happens before ME instruction in program order)

* AlternativeFreeList: License added
build.sc: remove unused config
Others: comments added

* package rename: remove unused modules

* Roq: Replace debug_prf with a cleaner fix method

* Disp1/AltFL/Rename: del unnecessary white spaces

* build.sc: change stack size
AlternativeFreeList: turn off assertions

* build.sc: change stack size for test

XiangShan is jointly released by ICT and PCL.

In this commit, we add License for XiangShan project. 

This commit uses Vec for lsrc, psrc, srcState and srcType in MicroOp bundle.
This makes uop easier to access.

* difftest: use DPI-C to refactor difftest

In this commit, difftest is refactored with DPI-C calls.
There're a few reasons:
(1) From Verilator's manual, DPI-C calls should be more efficient than accessing from dut_ptr.
(2) DPI-C is cross-platform (Verilator, VCS, ...)
(3) difftest APIs are splited from emu.cpp to possibly support more backend platforms
(NEMU, Spike, ...)

The performance at this commit is quite slower than the original emu.
Performance issues will be fixed later.

* [WIP] SimTop: try to use 'XSTop' as soc

* CircularQueuePtr: ues F-bounded polymorphis instead implict helper

* Refactor parameters & Clean up code

* difftest: support basic difftest

* Support diffetst in new sim top

* Difftest; convert recode fmt to ieee754 when comparing fp regs

* Difftest: pass sign-ext pc to dpic functions && fix exception pc

* Debug: add int/exc inst wb to debug queue

* Difftest: pass sign-ext pc to dpic functions && fix exception pc

* Difftest: fix naive commit num limit
Co-authored-by: NYinan Xu <xuyinan1997@gmail.com>
Co-authored-by: NWilliam Wang <zeweiwang@outlook.com>

XSPerfAccumulate: sum up performance values.
XSPerfHistogram: count the occurrence of performance values, split them
into bins, so that we can estimate their distribution.
XSPerfMax: get max of performance values.

In this commit, we add support for a simpler version of move elimination.

The original instruction sequences are:
move r1, r0
add r2, r1, r3

The optimized sequnces are:
move pr1, pr0
add pr2, pr0, pr3 # instead of add pr2, pr1, pr3

In this way, add can be issued once r0 is ready and move seems to be eliminated.