Kconfig 33.2 KB
Newer Older
1
#
2
# GPIO infrastructure and drivers
3 4
#

5 6 7 8 9 10 11 12
config ARCH_HAVE_CUSTOM_GPIO_H
	bool
	help
	  Selecting this config option from the architecture Kconfig allows
	  the architecture to provide a custom asm/gpio.h implementation
	  overriding the default implementations.  New uses of this are
	  strongly discouraged.

M
Michael Buesch 已提交
13 14
menuconfig GPIOLIB
	bool "GPIO Support"
L
Linus Walleij 已提交
15
	select ANON_INODES
M
Michael Buesch 已提交
16 17 18
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
19
	  one or more of the GPIO drivers below.
M
Michael Buesch 已提交
20 21

	  If unsure, say N.
22

M
Michael Buesch 已提交
23
if GPIOLIB
24

25 26 27 28
config GPIO_DEVRES
	def_bool y
	depends on HAS_IOMEM

29 30
config OF_GPIO
	def_bool y
31
	depends on OF
32

M
Mathias Nyman 已提交
33 34 35 36
config GPIO_ACPI
	def_bool y
	depends on ACPI

37
config GPIOLIB_IRQCHIP
38
	select IRQ_DOMAIN
39 40
	bool

41 42 43 44 45
config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
46 47 48
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
49 50 51
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

D
David Brownell 已提交
52 53
config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
54
	depends on SYSFS
D
David Brownell 已提交
55 56 57 58 59 60 61 62 63 64 65 66
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

G
Grant Likely 已提交
67 68 69
config GPIO_GENERIC
	tristate

70
# put drivers in the right section, in alphabetical order
71

72
# This symbol is selected by both I2C and SPI expanders
73 74 75
config GPIO_MAX730X
	tristate

76
menu "Memory mapped GPIO drivers"
77

78 79 80 81 82 83 84 85 86 87 88 89 90 91
config GPIO_74XX_MMIO
	tristate "GPIO driver for 74xx-ICs with MMIO access"
	depends on OF_GPIO
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO functionality for 74xx-compatible ICs
	  with MMIO access. Compatible models include:
	    1 bit:	741G125 (Input), 741G74 (Output)
	    2 bits:	742G125 (Input), 7474 (Output)
	    4 bits:	74125 (Input), 74175 (Output)
	    6 bits:	74365 (Input), 74174 (Output)
	    8 bits:	74244 (Input), 74273 (Output)
	    16 bits:	741624 (Input), 7416374 (Output)

92 93 94 95 96 97 98 99 100
config GPIO_ALTERA
	tristate "Altera GPIO"
	depends on OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say Y or M here to build support for the Altera PIO device.

	  If driver is built as a module it will be called gpio-altera.

Y
YD Tseng 已提交
101 102 103
config GPIO_AMDPT
	tristate "AMD Promontory GPIO support"
	depends on ACPI
104
	select GPIO_GENERIC
Y
YD Tseng 已提交
105 106 107 108
	help
	  driver for GPIO functionality on Promontory IOHub
	  Require ACPI ASL code to enumerate as a platform device.

J
Joel Stanley 已提交
109 110 111 112 113 114 115
config GPIO_ASPEED
	tristate "Aspeed GPIO support"
	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.

116 117 118
config GPIO_ATH79
	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
	default y if ATH79
119
	depends on ATH79 || COMPILE_TEST
120
	select GPIO_GENERIC
121
	select GPIOLIB_IRQCHIP
122 123 124 125
	help
	  Select this option to enable GPIO driver for
	  Atheros AR71XX/AR724X/AR913X SoC devices.

M
Maxime Ripard 已提交
126 127 128 129 130 131
config GPIO_AXP209
	tristate "X-Powers AXP209 PMIC GPIO Support"
	depends on MFD_AXP20X
	help
	  Say yes to enable GPIO support for the AXP209 PMIC

132 133 134 135 136 137
config GPIO_BCM_KONA
	bool "Broadcom Kona GPIO"
	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
	help
	  Turn on GPIO support for Broadcom "Kona" chips.

138 139
config GPIO_BRCMSTB
	tristate "BRCMSTB GPIO support"
140 141
	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
	depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST)
142
	select GPIO_GENERIC
143
	select GPIOLIB_IRQCHIP
144 145 146
	help
	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.

147
config GPIO_CLPS711X
148
	tristate "CLPS711X GPIO support"
149
	depends on ARCH_CLPS711X || COMPILE_TEST
150 151 152
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO on CLPS711X SoCs.
153

154 155 156 157 158 159 160
config GPIO_DAVINCI
	bool "TI Davinci/Keystone GPIO support"
	default y if ARCH_DAVINCI
	depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
	help
	  Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.

161 162 163 164 165 166 167 168
config GPIO_DWAPB
	tristate "Synopsys DesignWare APB GPIO driver"
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y or M here to build support for the Synopsys DesignWare APB
	  GPIO block.

M
Magnus Damm 已提交
169 170
config GPIO_EM
	tristate "Emma Mobile GPIO"
171
	depends on ARM && OF_GPIO
M
Magnus Damm 已提交
172 173 174
	help
	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.

175 176 177
config GPIO_EP93XX
	def_bool y
	depends on ARCH_EP93XX
178
	select GPIO_GENERIC
179

R
Rabin Vincent 已提交
180 181 182 183 184
config GPIO_ETRAXFS
	bool "Axis ETRAX FS General I/O"
	depends on CRIS || COMPILE_TEST
	depends on OF
	select GPIO_GENERIC
185
	select GPIOLIB_IRQCHIP
R
Rabin Vincent 已提交
186 187 188
	help
	  Say yes here to support the GPIO controller on Axis ETRAX FS SoCs.

189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230
config GPIO_GE_FPGA
	bool "GE FPGA based GPIO"
	depends on GE_FPGA
	select GPIO_GENERIC
	help
	  Support for common GPIO functionality provided on some GE Single Board
	  Computers.

	  This driver provides basic support (configure as input or output, read
	  and write pin state) for GPIO implemented in a number of GE single
	  board computers.

config GPIO_GENERIC_PLATFORM
	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
	select GPIO_GENERIC
	help
	  Say yes here to support basic platform_device memory-mapped GPIO controllers.

config GPIO_GRGPIO
	tristate "Aeroflex Gaisler GRGPIO support"
	depends on OF
	select GPIO_GENERIC
	select IRQ_DOMAIN
	help
	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
	  VHDL IP core library.

config GPIO_ICH
	tristate "Intel ICH GPIO"
	depends on PCI && X86
	select MFD_CORE
	select LPC_ICH
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).

	  If unsure, say N.

config GPIO_IOP
	tristate "Intel IOP GPIO"
231 232
	depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
	select GPIO_GENERIC
233 234 235 236 237 238 239 240 241 242 243 244
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  IOP32X or IOP33X.

	  If unsure, say N.

config GPIO_LOONGSON
	bool "Loongson-2/3 GPIO support"
	depends on CPU_LOONGSON2 || CPU_LOONGSON3
	help
	  driver for GPIO functionality on Loongson-2F/3A/3B processors.

J
Joachim Eastwood 已提交
245
config GPIO_LPC18XX
246
	tristate "NXP LPC18XX/43XX GPIO support"
J
Joachim Eastwood 已提交
247 248 249 250 251 252
	default y if ARCH_LPC18XX
	depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
	help
	  Select this option to enable GPIO driver for
	  NXP LPC18XX/43XX devices.

253 254 255 256 257 258 259 260
config GPIO_LYNXPOINT
	tristate "Intel Lynxpoint GPIO support"
	depends on ACPI && X86
	select GPIOLIB_IRQCHIP
	help
	  driver for GPIO functionality on Intel Lynxpoint PCH chipset
	  Requires ACPI device enumeration code to set up a platform device.

261 262
config GPIO_MB86S7X
	bool "GPIO support for Fujitsu MB86S7x Platforms"
263
	depends on ARCH_MB86S7X || COMPILE_TEST
264 265 266
	help
	  Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.

267 268 269 270 271 272 273
config GPIO_MENZ127
	tristate "MEN 16Z127 GPIO support"
	depends on MCB
	select GPIO_GENERIC
	help
	 Say yes here to support the MEN 16Z127 GPIO Controller

274 275 276 277 278 279 280 281
config GPIO_MM_LANTIQ
	bool "Lantiq Memory mapped GPIOs"
	depends on LANTIQ && SOC_XWAY
	help
	  This enables support for memory mapped GPIOs on the External Bus Unit
	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
	  created by attaching a 16bit latch to the bus.

J
Jonas Jensen 已提交
282 283
config GPIO_MOXART
	bool "MOXART GPIO support"
284
	depends on ARCH_MOXART || COMPILE_TEST
285
	select GPIO_GENERIC
J
Jonas Jensen 已提交
286 287 288 289
	help
	  Select this option to enable GPIO driver for
	  MOXA ART SoC devices.

290 291 292 293
config GPIO_MPC5200
	def_bool y
	depends on PPC_MPC52xx

294
config GPIO_MPC8XXX
295
	bool "MPC512x/MPC8xxx/QorIQ GPIO support"
296
	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
297 298 299
		   FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
		   COMPILE_TEST
	select GPIO_GENERIC
A
Arnd Bergmann 已提交
300
	select IRQ_DOMAIN
301 302
	help
	  Say Y here if you're going to use hardware that connects to the
303
	  MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
304

305 306
config GPIO_MVEBU
	def_bool y
307
	depends on PLAT_ORION
308
	depends on OF
309 310
	select GENERIC_IRQ_CHIP

311 312 313
config GPIO_MXC
	def_bool y
	depends on ARCH_MXC
G
Grant Likely 已提交
314
	select GPIO_GENERIC
315
	select GENERIC_IRQ_CHIP
G
Grant Likely 已提交
316 317 318 319

config GPIO_MXS
	def_bool y
	depends on ARCH_MXS
320
	select GPIO_GENERIC
321
	select GENERIC_IRQ_CHIP
322

323 324 325 326 327 328 329 330
config GPIO_OCTEON
	tristate "Cavium OCTEON GPIO"
	depends on GPIOLIB && CAVIUM_OCTEON_SOC
	default y
	help
	  Say yes here to support the on-chip GPIO lines on the OCTEON
	  family of SOCs.

331
config GPIO_OMAP
332
	tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
333
	default y if ARCH_OMAP
334 335
	depends on ARM
	select GENERIC_IRQ_CHIP
336
	select GPIOLIB_IRQCHIP
337 338 339
	help
	  Say yes here to enable GPIO support for TI OMAP SoCs.

340 341
config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
342
	depends on ARM_AMBA
343
	select IRQ_DOMAIN
344
	select GPIOLIB_IRQCHIP
345 346 347
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

348 349 350 351 352 353
config GPIO_PXA
	bool "PXA GPIO support"
	depends on ARCH_PXA || ARCH_MMP
	help
	  Say yes here to support the PXA GPIO device

M
Magnus Damm 已提交
354 355
config GPIO_RCAR
	tristate "Renesas R-Car GPIO"
S
Simon Horman 已提交
356
	depends on ARCH_RENESAS || COMPILE_TEST
357
	select GPIOLIB_IRQCHIP
M
Magnus Damm 已提交
358 359 360
	help
	  Say yes here to support GPIO on Renesas R-Car SoCs.

361 362 363 364 365 366 367
config GPIO_SPEAR_SPICS
	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
	depends on PLAT_SPEAR
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support ST SPEAr SPI Chip Select as GPIO device

A
Alessandro Rubini 已提交
368 369 370 371 372 373 374 375
config GPIO_STA2X11
	bool "STA2x11/ConneXt GPIO support"
	depends on MFD_STA2X11
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support the STA2x11/ConneXt GPIO device.
	  The GPIO module has 128 GPIO pins with alternate functions.

376 377 378 379 380 381 382 383 384 385
config GPIO_STP_XWAY
	bool "XWAY STP GPIOs"
	depends on SOC_XWAY
	help
	  This enables support for the Serial To Parallel (STP) unit found on
	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
	  that can be up to 24 bit. This peripheral is aimed at driving leds.
	  Some of the gpios/leds can be auto updated by the soc with dsl and
	  phy status.

386 387 388 389 390 391
config GPIO_SYSCON
	tristate "GPIO based on SYSCON"
	depends on MFD_SYSCON && OF
	help
	  Say yes here to support GPIO functionality though SYSCON driver.

392 393 394 395 396
config GPIO_TB10X
	bool
	select GENERIC_IRQ_CHIP
	select OF_GPIO

397
config GPIO_TEGRA
398 399
	bool "NVIDIA Tegra GPIO support"
	default ARCH_TEGRA
400
	depends on ARCH_TEGRA || COMPILE_TEST
401 402 403
	depends on OF
	help
	  Say yes here to support GPIO pins on NVIDIA Tegra SoCs.
404

405 406 407
config GPIO_TS4800
	tristate "TS-4800 DIO blocks and compatibles"
	depends on OF_GPIO
408
	depends on SOC_IMX51 || COMPILE_TEST
409 410 411 412
	select GPIO_GENERIC
	help
	  This driver support TS-4800 FPGA GPIO controllers.

413 414 415
config GPIO_TZ1090
	bool "Toumaz Xenif TZ1090 GPIO support"
	depends on SOC_TZ1090
416
	select GENERIC_IRQ_CHIP
417 418 419 420
	default y
	help
	  Say yes here to support Toumaz Xenif TZ1090 GPIOs.

421 422 423 424 425 426 427
config GPIO_TZ1090_PDC
	bool "Toumaz Xenif TZ1090 PDC GPIO support"
	depends on SOC_TZ1090
	default y
	help
	  Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.

428 429 430 431 432 433 434
config GPIO_VF610
	def_bool y
	depends on ARCH_MXC && SOC_VF610
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support Vybrid vf610 GPIOs.

435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452
config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

config GPIO_VX855
	tristate "VIA VX855/VX875 GPIO"
	depends on PCI
	select MFD_CORE
	select MFD_VX855
	help
	  Support access to the VX855/VX875 GPIO lines through the gpio library.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

453 454 455 456 457 458 459 460 461
config GPIO_XGENE
	bool "APM X-Gene GPIO controller support"
	depends on ARM64 && OF_GPIO
	help
	  This driver is to support the GPIO block within the APM X-Gene SoC
	  platform's generic flash controller. The GPIO pins are muxed with
	  the generic flash controller's address and data pins. Say yes
	  here to enable the GFC GPIO functionality.

462 463 464 465
config GPIO_XGENE_SB
	tristate "APM X-Gene GPIO standby controller support"
	depends on ARCH_XGENE && OF_GPIO
	select GPIO_GENERIC
466
	select GPIOLIB_IRQCHIP
467 468 469 470
	help
	  This driver supports the GPIO block within the APM X-Gene
	  Standby Domain. Say yes here to enable the GPIO functionality.

471
config GPIO_XILINX
472
	tristate "Xilinx GPIO support"
473
	depends on OF_GPIO
474 475 476
	help
	  Say yes here to support the Xilinx FPGA GPIO device

477 478
config GPIO_XLP
	tristate "Netlogic XLP GPIO support"
479
	depends on OF_GPIO && (CPU_XLP || ARCH_VULCAN || COMPILE_TEST)
480 481 482 483 484 485 486 487
	select GPIOLIB_IRQCHIP
	help
	  This driver provides support for GPIO interface on Netlogic XLP MIPS64
	  SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
	  XLP9XX and XLP5XX.

	  If unsure, say N.

B
Baruch Siach 已提交
488 489 490
config GPIO_XTENSA
	bool "Xtensa GPIO32 support"
	depends on XTENSA
491
	depends on HAVE_XTENSA_GPIO32
B
Baruch Siach 已提交
492 493 494 495 496
	depends on !SMP
	help
	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
	  and EXPSTATE (output) ports

497 498 499
config GPIO_ZEVIO
	bool "LSI ZEVIO SoC memory mapped GPIOs"
	depends on ARM && OF_GPIO
500
	help
501
	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
502

503 504
config GPIO_ZYNQ
	tristate "Xilinx Zynq GPIO support"
505
	depends on ARCH_ZYNQ || ARCH_ZYNQMP
506
	select GPIOLIB_IRQCHIP
507
	help
508
	  Say yes here to support Xilinx Zynq GPIO controller.
509

L
Linus Walleij 已提交
510 511 512 513 514 515
config GPIO_ZX
	bool "ZTE ZX GPIO support"
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support the GPIO device on ZTE ZX SoCs.

516 517 518 519 520 521 522
config GPIO_LOONGSON1
	tristate "Loongson1 GPIO support"
	depends on MACH_LOONGSON32
	select GPIO_GENERIC
	help
	  Say Y or M here to support GPIO on Loongson1 SoCs.

523
endmenu
524

525
menu "Port-mapped I/O GPIO drivers"
526
	depends on X86 # Unconditional I/O space access
527

528 529
config GPIO_104_DIO_48E
	tristate "ACCES 104-DIO-48E GPIO support"
530
	depends on ISA_BUS_API
531 532
	select GPIOLIB_IRQCHIP
	help
533 534 535 536
	  Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
	  104-DIO-24E). The base port addresses for the devices may be
	  configured via the base module parameter. The interrupt line numbers
	  for the devices may be configured via the irq module parameter.
537

538 539
config GPIO_104_IDIO_16
	tristate "ACCES 104-IDIO-16 GPIO support"
540
	depends on ISA_BUS_API
541
	select GPIOLIB_IRQCHIP
542
	help
543 544 545 546 547
	  Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
	  104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
	  base port addresses for the devices may be configured via the base
	  module parameter. The interrupt line numbers for the devices may be
	  configured via the irq module parameter.
548

549 550
config GPIO_104_IDI_48
	tristate "ACCES 104-IDI-48 GPIO support"
551
	depends on ISA_BUS_API
552 553
	select GPIOLIB_IRQCHIP
	help
554 555 556 557 558
	  Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
	  104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
	  the devices may be configured via the base module parameter. The
	  interrupt line numbers for the devices may be configured via the irq
	  module parameter.
559

560
config GPIO_F7188X
561
	tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
562 563
	help
	  This option enables support for GPIOs found on Fintek Super-I/O
564
	  chips F71869, F71869A, F71882FG, F71889F and F81866.
565 566 567 568

	  To compile this driver as a module, choose M here: the module will
	  be called f7188x-gpio.

569 570 571 572 573 574 575 576 577 578 579 580 581
config GPIO_GPIO_MM
	tristate "Diamond Systems GPIO-MM GPIO support"
	depends on ISA_BUS_API
	help
	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.

	  The Diamond Systems GPIO-MM device features 48 lines of digital I/O
	  via the emulation of dual 82C55A PPI chips. This driver provides GPIO
	  support for these 48 channels of digital I/O.

	  The base port addresses for the devices may be configured via the base
	  array module parameter.

582 583 584 585 586 587
config GPIO_IT87
	tristate "IT87xx GPIO support"
	help
	  Say yes here to support GPIO functionality of IT87xx Super I/O chips.

	  This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
588
	  supports the IT8761E, IT8620E and IT8628E Super I/O chip as well.
589 590 591 592 593 594

	  To compile this driver as a module, choose M here: the module will
	  be called gpio_it87

config GPIO_SCH
	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
595
	depends on PCI
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637
	select MFD_CORE
	select LPC_SCH
	help
	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
	  Intel Tunnel Creek processor, Intel Centerton processor or
	  Intel Quark X1000 SoC.

	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
	  powered by the core power rail and are turned off during sleep
	  modes (S3 and higher). The remaining four GPIOs are powered by
	  the Intel SCH suspend power supply. These GPIOs remain
	  active during S3. The suspend powered GPIOs can be used to wake the
	  system from the Suspend-to-RAM state.

	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
	  core power rail and 9 from suspend power supply.

	  The Intel Centerton processor has a total of 30 GPIO pins.
	  Twenty-one are powered by the core power rail and 9 from the
	  suspend power supply.

	  The Intel Quark X1000 SoC has 2 GPIOs powered by the core
	  power well and 6 from the suspend power well.

config GPIO_SCH311X
	tristate "SMSC SCH311x SuperI/O GPIO"
	help
	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
	  SCH3116 "Super I/O" chipsets.

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-sch311x.

config GPIO_TS5500
	tristate "TS-5500 DIO blocks and compatibles"
	depends on TS5500 || COMPILE_TEST
	help
	  This driver supports Digital I/O exposed by pin blocks found on some
	  Technologic Systems platforms. It includes, but is not limited to, 3
	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
	  LCD port.

638 639
config GPIO_WS16C48
	tristate "WinSystems WS16C48 GPIO support"
640
	depends on ISA_BUS_API
641 642
	select GPIOLIB_IRQCHIP
	help
643 644 645 646
	  Enables GPIO support for the WinSystems WS16C48. The base port
	  addresses for the devices may be configured via the base module
	  parameter. The interrupt line numbers for the devices may be
	  configured via the irq module parameter.
647

648 649
endmenu

650 651
menu "I2C GPIO expanders"
	depends on I2C
652

653 654
config GPIO_ADP5588
	tristate "ADP5588 I2C GPIO expander"
655
	help
656 657
	  This option enables support for 18 GPIOs found
	  on Analog Devices ADP5588 GPIO Expanders.
658

659 660 661
config GPIO_ADP5588_IRQ
	bool "Interrupt controller support for ADP5588"
	depends on GPIO_ADP5588=y
662
	help
663 664
	  Say yes here to enable the adp5588 to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.
665

666 667
config GPIO_ADNP
	tristate "Avionic Design N-bit GPIO expander"
668
	depends on OF_GPIO
669 670
	select GPIOLIB_IRQCHIP
	help
671 672 673 674 675 676
	  This option enables support for N GPIOs found on Avionic Design
	  I2C GPIO expanders. The register space will be extended by powers
	  of two, so the controller will need to accommodate for that. For
	  example: if a controller provides 48 pins, 6 registers will be
	  enough to represent all pins, but the driver will assume a
	  register layout for 64 pins (8 registers).
677

678 679 680 681
config GPIO_MAX7300
	tristate "Maxim MAX7300 GPIO expander"
	select GPIO_MAX730X
	help
682
	  GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
683

E
Eric Miao 已提交
684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701
config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

702 703
config GPIO_MAX732X_IRQ
	bool "Interrupt controller support for MAX732x"
704
	depends on GPIO_MAX732X=y
705
	select GPIOLIB_IRQCHIP
706 707 708 709
	help
	  Say yes here to enable the max732x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

710 711
config GPIO_MC9S08DZ60
	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
712
	depends on I2C=y && MACH_MX35_3DS
713 714 715
	help
	  Select this to enable the MC9S08DZ60 GPIO driver

716
config GPIO_PCA953X
A
Aaron Sierra 已提交
717
	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
718
	help
719 720 721 722 723 724
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

725
	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
A
Aaron Sierra 已提交
726
			pca9556, pca9557, pca9574, tca6408, xra1202
727

728 729
	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
			tca6416
730

731 732
	  24 bits:	tca6424

A
Aaron Sierra 已提交
733
	  40 bits:	pca9505, pca9698
734

735 736 737
config GPIO_PCA953X_IRQ
	bool "Interrupt controller support for PCA953x"
	depends on GPIO_PCA953X=y
738
	select GPIOLIB_IRQCHIP
739 740 741 742
	help
	  Say yes here to enable the pca953x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

743
config GPIO_PCF857X
744
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
745
	select GPIOLIB_IRQCHIP
A
Arnd Bergmann 已提交
746
	select IRQ_DOMAIN
747 748 749 750 751 752 753
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
754 755
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329
756 757 758 759 760 761 762 763 764 765 766 767

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

768 769 770
config GPIO_SX150X
	bool "Semtech SX150x I2C GPIO expander"
	depends on I2C=y
771
	select GPIOLIB_IRQCHIP
772 773 774 775 776 777 778 779
	default n
	help
	  Say yes here to provide support for Semtech SX150-series I2C
	  GPIO expanders. Compatible models include:

	  8 bits:  sx1508q
	  16 bits: sx1509q

780 781 782 783 784 785 786 787
config GPIO_TPIC2810
	tristate "TPIC2810 8-Bit I2C GPO expander"
	help
	  Say yes here to enable the GPO driver for the TI TPIC2810 chip.

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-tpic2810.

788 789 790 791 792 793 794
config GPIO_TS4900
	tristate "Technologic Systems FPGA I2C GPIO"
	select REGMAP_I2C
	help
	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
	  Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.

795 796 797
endmenu

menu "MFD GPIO expanders"
798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889

config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

config GPIO_ARIZONA
	tristate "Wolfson Microelectronics Arizona class devices"
	depends on MFD_ARIZONA
	help
	  Support for GPIOs on Wolfson Arizona class devices.

config GPIO_CRYSTAL_COVE
	tristate "GPIO support for Crystal Cove PMIC"
	depends on INTEL_SOC_PMIC
	select GPIOLIB_IRQCHIP
	help
	  Support for GPIO pins on Crystal Cove PMIC.

	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
	  inside.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-crystalcove.

config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
	depends on MFD_CS5535
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

config GPIO_DA9052
	tristate "Dialog DA9052 GPIO"
	depends on PMIC_DA9052
	help
	  Say yes here to enable the GPIO driver for the DA9052 chip.

config GPIO_DA9055
	tristate "Dialog Semiconductor DA9055 GPIO"
	depends on MFD_DA9055
	help
	  Say yes here to enable the GPIO driver for the DA9055 chip.

	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
	  be controller by this driver.

	  If driver is built as a module it will be called gpio-da9055.

config GPIO_DLN2
	tristate "Diolan DLN2 GPIO support"
	depends on MFD_DLN2
	select GPIOLIB_IRQCHIP

	help
	  Select this option to enable GPIO driver for the Diolan DLN2
	  board.

	  This driver can also be built as a module. If so, the module
	  will be called gpio-dln2.

config GPIO_JANZ_TTL
	tristate "Janz VMOD-TTL Digital IO Module"
	depends on MFD_JANZ_CMODIO
	help
	  This enables support for the Janz VMOD-TTL Digital IO module.
	  This driver provides support for driving the pins in output
	  mode only. Input mode is not supported.

config GPIO_KEMPLD
	tristate "Kontron ETX / COMexpress GPIO"
	depends on MFD_KEMPLD
	help
	  This enables support for the PLD GPIO interface on some Kontron ETX
	  and COMexpress (ETXexpress) modules.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-kempld.

config GPIO_LP3943
	tristate "TI/National Semiconductor LP3943 GPIO expander"
	depends on MFD_LP3943
	help
	  GPIO driver for LP3943 MFD.
	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
	  Open drain outputs are required for this usage.

890 891 892 893 894 895 896 897 898 899
config GPIO_LP873X
	tristate "TI LP873X GPO"
	depends on MFD_TI_LP873X
	help
	  This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present
	  on LP873X PMICs.

	  This driver can also be built as a module. If so, the module will be
          called gpio-lp873x.

900 901 902 903 904 905 906 907 908
config GPIO_MAX77620
	tristate "GPIO support for PMIC MAX77620 and MAX20024"
	depends on MFD_MAX77620
	help
	  GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
	  MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
	  driver also provides interrupt support for each of the gpios.
	  Say yes here to enable the max77620 to be used as gpio controller.

909 910 911 912 913 914 915 916 917 918 919 920 921 922
config GPIO_MSIC
	bool "Intel MSIC mixed signal gpio support"
	depends on MFD_INTEL_MSIC
	help
	  Enable support for GPIO on intel MSIC controllers found in
	  intel MID devices

config GPIO_PALMAS
	bool "TI PALMAS series PMICs GPIO"
	depends on MFD_PALMAS
	help
	  Select this option to enable GPIO driver for the TI PALMAS
	  series chip family.

923 924 925 926 927 928 929 930 931
config GPIO_RC5T583
	bool "RICOH RC5T583 GPIO"
	depends on MFD_RC5T583
	help
	  Select this option to enable GPIO driver for the Ricoh RC5T583
	  chip family.
	  This driver provides the support for driving/reading the gpio pins
	  of RC5T583 device through standard gpio library.

R
Rabin Vincent 已提交
932 933 934
config GPIO_STMPE
	bool "STMPE GPIOs"
	depends on MFD_STMPE
935
	depends on OF_GPIO
936
	select GPIOLIB_IRQCHIP
R
Rabin Vincent 已提交
937 938 939 940
	help
	  This enables support for the GPIOs found on the STMPE I/O
	  Expanders.

941 942 943
config GPIO_TC3589X
	bool "TC3589X GPIOs"
	depends on MFD_TC3589X
944
	depends on OF_GPIO
945
	select GPIOLIB_IRQCHIP
R
Rabin Vincent 已提交
946
	help
947
	  This enables support for the GPIOs found on the TC3589X
R
Rabin Vincent 已提交
948 949
	  I/O Expander.

950 951 952 953 954 955
config GPIO_TIMBERDALE
	bool "Support for timberdale GPIO IP"
	depends on MFD_TIMBERDALE
	---help---
	Add support for the GPIO IP in the timberdale FPGA.

956 957 958 959 960 961
config GPIO_TPS65086
	tristate "TI TPS65086 GPO"
	depends on MFD_TPS65086
	help
	  This driver supports the GPO on TI TPS65086x PMICs.

N
Nicolas Saenz Julienne 已提交
962 963 964 965 966 967 968
config GPIO_TPS65218
	tristate "TPS65218 GPIO"
	depends on MFD_TPS65218
	help
	  Select this option to enable GPIO driver for the TPS65218
	  chip family.

969 970 971 972 973 974 975 976 977 978 979 980 981 982
config GPIO_TPS6586X
	bool "TPS6586X GPIO"
	depends on MFD_TPS6586X
	help
	  Select this option to enable GPIO driver for the TPS6586X
	  chip family.

config GPIO_TPS65910
	bool "TPS65910 GPIO"
	depends on MFD_TPS65910
	help
	  Select this option to enable GPIO driver for the TPS65910
	  chip family.

983 984
config GPIO_TPS65912
	tristate "TI TPS65912 GPIO"
985
	depends on MFD_TPS65912
986 987 988
	help
	  This driver supports TPS65912 gpio chip

D
David Brownell 已提交
989 990 991 992 993 994 995
config GPIO_TWL4030
	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	depends on TWL4030_CORE
	help
	  Say yes here to access the GPIO signals of various multi-function
	  power management chips from Texas Instruments.

996 997 998 999 1000 1001 1002
config GPIO_TWL6040
	tristate "TWL6040 GPO"
	depends on TWL6040_CORE
	help
	  Say yes here to access the GPO signals of twl6040
	  audio chip from Texas Instruments.

1003 1004 1005 1006 1007 1008 1009
config GPIO_UCB1400
	tristate "Philips UCB1400 GPIO"
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 GPIO pins.
	  The UCB1400 is an AC97 audio codec.

1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022
config GPIO_WHISKEY_COVE
	tristate "GPIO support for Whiskey Cove PMIC"
	depends on INTEL_SOC_PMIC
	select GPIOLIB_IRQCHIP
	help
	  Support for GPIO pins on Whiskey Cove PMIC.

	  Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
	  inside.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-wcove.

M
Mark Brown 已提交
1023 1024 1025 1026 1027 1028 1029
config GPIO_WM831X
	tristate "WM831x GPIOs"
	depends on MFD_WM831X
	help
	  Say yes here to access the GPIO signals of WM831x power management
	  chips from Wolfson Microelectronics.

1030 1031 1032 1033 1034 1035 1036
config GPIO_WM8350
	tristate "WM8350 GPIOs"
	depends on MFD_WM8350
	help
	  Say yes here to access the GPIO signals of WM8350 power management
	  chips from Wolfson Microelectronics.

M
Mark Brown 已提交
1037 1038 1039 1040 1041 1042 1043
config GPIO_WM8994
	tristate "WM8994 GPIOs"
	depends on MFD_WM8994
	help
	  Say yes here to access the GPIO signals of WM8994 audio hub
	  CODECs from Wolfson Microelectronics.

1044
endmenu
1045

1046 1047
menu "PCI GPIO expanders"
	depends on PCI
1048

1049 1050
config GPIO_AMD8111
	tristate "AMD 8111 GPIO driver"
1051
	help
1052
	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
M
Michael Buesch 已提交
1053

1054 1055 1056
	  Note, that usually system firmware/ACPI handles GPIO pins on their
	  own and users might easily break their systems with uncarefull usage
	  of this driver!
1057

1058
	  If unsure, say N
1059

M
Michael Buesch 已提交
1060 1061
config GPIO_BT8XX
	tristate "BT8XX GPIO abuser"
1062
	depends on VIDEO_BT848=n
M
Michael Buesch 已提交
1063
	help
G
Geert Uytterhoeven 已提交
1064
	  The BT8xx frame grabber chip has 24 GPIO pins that can be abused
M
Michael Buesch 已提交
1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075
	  as a cheap PCI GPIO card.

	  This chip can be found on Miro, Hauppauge and STB TV-cards.

	  The card needs to be physically altered for using it as a
	  GPIO card. For more information on how to build a GPIO card
	  from a BT8xx TV card, see the documentation file at
	  Documentation/bt8xxgpio.txt

	  If unsure, say N.

1076
config GPIO_INTEL_MID
1077 1078
	bool "Intel MID GPIO support"
	depends on X86_INTEL_MID
1079
	select GPIOLIB_IRQCHIP
1080
	help
1081
	  Say Y here to support Intel MID GPIO.
1082

1083 1084 1085
config GPIO_MERRIFIELD
	tristate "Intel Merrifield GPIO support"
	depends on X86_INTEL_MID
1086
	select GPIOLIB_IRQCHIP
1087
	help
1088
	  Say Y here to support Intel Merrifield GPIO.
1089

1090 1091 1092 1093 1094 1095 1096 1097 1098
config GPIO_ML_IOH
	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
	select GENERIC_IRQ_CHIP
	help
	  ML7213 is companion chip for Intel Atom E6xx series.
	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
	  Hub) which is for IVI(In-Vehicle Infotainment) use.
	  This driver can access the IOH's GPIO device.

1099
config GPIO_PCH
1100
	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
1101
	depends on X86_32 || MIPS || COMPILE_TEST
1102
	select GENERIC_IRQ_CHIP
1103 1104 1105 1106 1107
	help
	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
	  which is an IOH(Input/Output Hub) for x86 embedded processor.
	  This driver can access PCH GPIO device.

1108 1109
	  This driver also can be used for LAPIS Semiconductor IOH(Input/
	  Output Hub), ML7223 and ML7831.
1110
	  ML7223 IOH is for MP(Media Phone) use.
1111 1112 1113
	  ML7831 IOH is for general purpose use.
	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
1114

1115 1116 1117 1118
config GPIO_RDC321X
	tristate "RDC R-321x GPIO support"
	select MFD_CORE
	select MFD_RDC321X
1119
	help
1120 1121
	  Support for the RDC R321x SoC GPIOs over southbridge
	  PCI configuration space.
1122

1123 1124
config GPIO_SODAVILLE
	bool "Intel Sodaville GPIO support"
1125
	depends on X86 && OF
1126 1127 1128 1129 1130
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y here to support Intel Sodaville GPIO.

1131
endmenu
1132

1133 1134
menu "SPI GPIO expanders"
	depends on SPI_MASTER
1135

1136 1137
config GPIO_74X164
	tristate "74x164 serial-in/parallel-out 8-bits shift register"
L
Linus Walleij 已提交
1138
	depends on OF
1139 1140 1141 1142
	help
	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
	  shift registers. This driver can be used to provide access
	  to more gpio outputs.
1143

1144 1145
config GPIO_MAX7301
	tristate "Maxim MAX7301 GPIO expander"
1146
	select GPIO_MAX730X
1147
	help
1148
	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1149

R
Richard Röjfors 已提交
1150 1151 1152 1153 1154 1155
config GPIO_MC33880
	tristate "Freescale MC33880 high-side/low-side switch"
	help
	  SPI driver for Freescale MC33880 high-side/low-side switch.
	  This provides GPIO interface supporting inputs and outputs.

1156 1157 1158 1159 1160 1161
config GPIO_PISOSR
	tristate "Generic parallel-in/serial-out shift register"
	help
	  GPIO driver for SPI compatible parallel-in/serial-out shift
	  registers. These are input only devices.

L
Linus Walleij 已提交
1162 1163 1164 1165 1166 1167 1168
endmenu

menu "SPI or I2C GPIO expanders"
	depends on (SPI_MASTER && !I2C) || I2C

config GPIO_MCP23S08
	tristate "Microchip MCP23xxx I/O expander"
1169
	select GPIOLIB_IRQCHIP
1170
	help
L
Linus Walleij 已提交
1171 1172 1173 1174
	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
	  I/O expanders.
	  This provides a GPIO interface supporting inputs and outputs.
	  The I2C versions of the chips can be used as interrupt-controller.
1175

1176
endmenu
M
Mathias Nyman 已提交
1177

1178 1179
menu "USB GPIO expanders"
	depends on USB
L
Lars Poeschel 已提交
1180 1181 1182

config GPIO_VIPERBOARD
	tristate "Viperboard GPIO a & b support"
1183
	depends on MFD_VIPERBOARD
L
Lars Poeschel 已提交
1184 1185 1186 1187 1188 1189 1190 1191
	help
	  Say yes here to access the GPIO signals of Nano River
	  Technologies Viperboard. There are two GPIO chips on the
	  board: gpioa and gpiob.
          See viperboard API specification and Nano
          River Tech's viperboard.h for detailed meaning
          of the module parameters.

1192
endmenu
1193

M
Michael Buesch 已提交
1194
endif