提交 be9b06b2 编写于 作者: D Denis Turischev 提交者: Samuel Ortiz

gpio: add Intel SCH GPIO controller driver

Signed-off-by: NDenis Turischev <denis@compulab.co.il>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 fd46a006
......@@ -94,6 +94,22 @@ config GPIO_VR41XX
help
Say yes here to support the NEC VR4100 series General-purpose I/O Uint
config GPIO_SCH
tristate "Intel SCH GPIO"
depends on GPIOLIB
select LPC_SCH
help
Say yes here to support GPIO interface on Intel Poulsbo SCH.
The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
powered by the core power rail and are turned off during sleep
modes (S3 and higher). The remaining four GPIOs are powered by
the Intel SCH suspend power supply. These GPIOs remain
active during S3. The suspend powered GPIOs can be used to wake the
system from the Suspend-to-RAM state.
This driver can also be built as a module. If so, the module
will be called sch-gpio.
comment "I2C GPIO expanders:"
config GPIO_MAX7300
......
......@@ -27,3 +27,4 @@ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o
obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
\ No newline at end of file
/*
* sch_gpio.c - GPIO interface for Intel Poulsbo SCH
*
* Copyright (c) 2010 CompuLab Ltd
* Author: Denis Turischev <denis@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
static DEFINE_SPINLOCK(gpio_lock);
#define CGEN (0x00)
#define CGIO (0x04)
#define CGLV (0x08)
#define RGEN (0x20)
#define RGIO (0x24)
#define RGLV (0x28)
static unsigned short gpio_ba;
static int sch_gpio_core_direction_in(struct gpio_chip *gc, unsigned gpio_num)
{
u8 curr_dirs;
unsigned short offset, bit;
spin_lock(&gpio_lock);
offset = CGIO + gpio_num / 8;
bit = gpio_num % 8;
curr_dirs = inb(gpio_ba + offset);
if (!(curr_dirs & (1 << bit)))
outb(curr_dirs | (1 << bit), gpio_ba + offset);
spin_unlock(&gpio_lock);
return 0;
}
static int sch_gpio_core_get(struct gpio_chip *gc, unsigned gpio_num)
{
int res;
unsigned short offset, bit;
offset = CGLV + gpio_num / 8;
bit = gpio_num % 8;
res = !!(inb(gpio_ba + offset) & (1 << bit));
return res;
}
static void sch_gpio_core_set(struct gpio_chip *gc, unsigned gpio_num, int val)
{
u8 curr_vals;
unsigned short offset, bit;
spin_lock(&gpio_lock);
offset = CGLV + gpio_num / 8;
bit = gpio_num % 8;
curr_vals = inb(gpio_ba + offset);
if (val)
outb(curr_vals | (1 << bit), gpio_ba + offset);
else
outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
spin_unlock(&gpio_lock);
}
static int sch_gpio_core_direction_out(struct gpio_chip *gc,
unsigned gpio_num, int val)
{
u8 curr_dirs;
unsigned short offset, bit;
sch_gpio_core_set(gc, gpio_num, val);
spin_lock(&gpio_lock);
offset = CGIO + gpio_num / 8;
bit = gpio_num % 8;
curr_dirs = inb(gpio_ba + offset);
if (curr_dirs & (1 << bit))
outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
spin_unlock(&gpio_lock);
return 0;
}
static struct gpio_chip sch_gpio_core = {
.label = "sch_gpio_core",
.owner = THIS_MODULE,
.direction_input = sch_gpio_core_direction_in,
.get = sch_gpio_core_get,
.direction_output = sch_gpio_core_direction_out,
.set = sch_gpio_core_set,
};
static int sch_gpio_resume_direction_in(struct gpio_chip *gc,
unsigned gpio_num)
{
u8 curr_dirs;
spin_lock(&gpio_lock);
curr_dirs = inb(gpio_ba + RGIO);
if (!(curr_dirs & (1 << gpio_num)))
outb(curr_dirs | (1 << gpio_num) , gpio_ba + RGIO);
spin_unlock(&gpio_lock);
return 0;
}
static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num)
{
return !!(inb(gpio_ba + RGLV) & (1 << gpio_num));
}
static void sch_gpio_resume_set(struct gpio_chip *gc,
unsigned gpio_num, int val)
{
u8 curr_vals;
spin_lock(&gpio_lock);
curr_vals = inb(gpio_ba + RGLV);
if (val)
outb(curr_vals | (1 << gpio_num), gpio_ba + RGLV);
else
outb((curr_vals & ~(1 << gpio_num)), gpio_ba + RGLV);
spin_unlock(&gpio_lock);
}
static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
unsigned gpio_num, int val)
{
u8 curr_dirs;
sch_gpio_resume_set(gc, gpio_num, val);
spin_lock(&gpio_lock);
curr_dirs = inb(gpio_ba + RGIO);
if (curr_dirs & (1 << gpio_num))
outb(curr_dirs & ~(1 << gpio_num), gpio_ba + RGIO);
spin_unlock(&gpio_lock);
return 0;
}
static struct gpio_chip sch_gpio_resume = {
.label = "sch_gpio_resume",
.owner = THIS_MODULE,
.direction_input = sch_gpio_resume_direction_in,
.get = sch_gpio_resume_get,
.direction_output = sch_gpio_resume_direction_out,
.set = sch_gpio_resume_set,
};
static int __devinit sch_gpio_probe(struct platform_device *pdev)
{
struct resource *res;
int err;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -EBUSY;
if (!request_region(res->start, resource_size(res), pdev->name))
return -EBUSY;
gpio_ba = res->start;
sch_gpio_core.base = 0;
sch_gpio_core.ngpio = 10;
sch_gpio_core.dev = &pdev->dev;
sch_gpio_resume.base = 10;
sch_gpio_resume.ngpio = 4;
sch_gpio_resume.dev = &pdev->dev;
err = gpiochip_add(&sch_gpio_core);
if (err < 0)
goto err_sch_gpio_core;
err = gpiochip_add(&sch_gpio_resume);
if (err < 0)
goto err_sch_gpio_resume;
/*
* GPIO[6:0] enabled by default
* GPIO7 is configured by the CMC as SLPIOVR
* Enable GPIO[9:8] core powered gpios explicitly
*/
outb(0x3, gpio_ba + CGEN + 1);
/*
* SUS_GPIO[2:0] enabled by default
* Enable SUS_GPIO3 resume powered gpio explicitly
*/
outb(0x8, gpio_ba + RGEN);
return 0;
err_sch_gpio_resume:
gpiochip_remove(&sch_gpio_core);
err_sch_gpio_core:
release_region(res->start, resource_size(res));
gpio_ba = 0;
return err;
}
static int __devexit sch_gpio_remove(struct platform_device *pdev)
{
struct resource *res;
if (gpio_ba) {
gpiochip_remove(&sch_gpio_core);
gpiochip_remove(&sch_gpio_resume);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
release_region(res->start, resource_size(res));
gpio_ba = 0;
}
return 0;
}
static struct platform_driver sch_gpio_driver = {
.driver = {
.name = "sch_gpio",
.owner = THIS_MODULE,
},
.probe = sch_gpio_probe,
.remove = __devexit_p(sch_gpio_remove),
};
static int __init sch_gpio_init(void)
{
return platform_driver_register(&sch_gpio_driver);
}
static void __exit sch_gpio_exit(void)
{
platform_driver_unregister(&sch_gpio_driver);
}
module_init(sch_gpio_init);
module_exit(sch_gpio_exit);
MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sch_gpio");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册