提交 1920906f 编写于 作者: P Peter Hung 提交者: Linus Walleij

gpio-f7188x: Add F81866 GPIO supports

Add F81866 GPIO supports

Fintek F81866 is a SuperIO. It contains HWMON/GPIO/Serial Ports.
and it has totally 72(9x8 sets) gpio pins.

Here is the PDF spec:
http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html

The control method is the same with F7188x, but we should care the address
of GPIO8x.

GPIO address is below:
    GPIO0x based: 0xf0
    GPIO1x based: 0xe0
    GPIO2x based: 0xd0
    GPIO3x based: 0xc0
    GPIO4x based: 0xb0
    GPIO5x based: 0xa0
    GPIO6x based: 0x90
    GPIO7x based: 0x80
    GPIO8x based: 0x88 <-- not 0x70.
Signed-off-by: NPeter Hung <hpeter+linux_kernel@gmail.com>
Acked-by: NSimon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 1b06d64f
......@@ -515,10 +515,10 @@ config GPIO_104_IDI_48
via the idi_48_irq module parameter.
config GPIO_F7188X
tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
help
This option enables support for GPIOs found on Fintek Super-I/O
chips F71869, F71869A, F71882FG and F71889F.
chips F71869, F71869A, F71882FG, F71889F and F81866.
To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
......
/*
* GPIO driver for Fintek Super-I/O F71869, F71869A, F71882 and F71889
* GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
*
* Copyright (C) 2010-2013 LaCie
*
......@@ -36,14 +36,16 @@
#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */
#define SIO_F81866_ID 0x1010 /* F81866 chipset ID */
enum chips { f71869, f71869a, f71882fg, f71889f };
enum chips { f71869, f71869a, f71882fg, f71889f, f81866 };
static const char * const f7188x_names[] = {
"f71869",
"f71869a",
"f71882fg",
"f71889f",
"f81866",
};
struct f7188x_sio {
......@@ -190,6 +192,18 @@ static struct f7188x_gpio_bank f71889_gpio_bank[] = {
F7188X_GPIO_BANK(70, 8, 0x80),
};
static struct f7188x_gpio_bank f81866_gpio_bank[] = {
F7188X_GPIO_BANK(0, 8, 0xF0),
F7188X_GPIO_BANK(10, 8, 0xE0),
F7188X_GPIO_BANK(20, 8, 0xD0),
F7188X_GPIO_BANK(30, 8, 0xC0),
F7188X_GPIO_BANK(40, 8, 0xB0),
F7188X_GPIO_BANK(50, 8, 0xA0),
F7188X_GPIO_BANK(60, 8, 0x90),
F7188X_GPIO_BANK(70, 8, 0x80),
F7188X_GPIO_BANK(80, 8, 0x88),
};
static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
int err;
......@@ -318,6 +332,10 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
data->nr_bank = ARRAY_SIZE(f71889_gpio_bank);
data->bank = f71889_gpio_bank;
break;
case f81866:
data->nr_bank = ARRAY_SIZE(f81866_gpio_bank);
data->bank = f81866_gpio_bank;
break;
default:
return -ENODEV;
}
......@@ -395,6 +413,9 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
case SIO_F71889_ID:
sio->type = f71889f;
break;
case SIO_F81866_ID:
sio->type = f81866;
break;
default:
pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid);
goto err;
......@@ -485,6 +506,6 @@ static void __exit f7188x_gpio_exit(void)
}
module_exit(f7188x_gpio_exit);
MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG and F71889F");
MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866");
MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册