scsi-disk.c 58.1 KB
Newer Older
P
pbrook 已提交
1 2 3 4 5 6 7
/*
 * SCSI Device emulation
 *
 * Copyright (c) 2006 CodeSourcery.
 * Based on code by Fabrice Bellard
 *
 * Written by Paul Brook
8 9 10 11 12 13
 * Modifications:
 *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 *                                 when the allocation length of CDB is smaller
 *                                 than 36.
 *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 *                                 MODE SENSE response.
P
pbrook 已提交
14
 *
M
Matthew Fernandez 已提交
15
 * This code is licensed under the LGPL.
P
pbrook 已提交
16 17
 *
 * Note that this file only handles the SCSI architecture model and device
18 19
 * commands.  Emulation of interface/link layer protocols is handled by
 * the host adapter emulator.
P
pbrook 已提交
20 21 22 23 24
 */

//#define DEBUG_SCSI

#ifdef DEBUG_SCSI
25 26
#define DPRINTF(fmt, ...) \
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
27
#else
28
#define DPRINTF(fmt, ...) do {} while(0)
P
pbrook 已提交
29 30
#endif

31 32
#define BADF(fmt, ...) \
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
33

P
pbrook 已提交
34
#include "qemu-common.h"
35
#include "qemu-error.h"
G
Gerd Hoffmann 已提交
36
#include "scsi.h"
G
Gerd Hoffmann 已提交
37
#include "scsi-defs.h"
38
#include "sysemu.h"
B
Blue Swirl 已提交
39
#include "blockdev.h"
40
#include "block_int.h"
41
#include "dma.h"
42

43 44 45 46
#ifdef __linux
#include <scsi/sg.h>
#endif

47
#define SCSI_DMA_BUF_SIZE    131072
48
#define SCSI_MAX_INQUIRY_LEN 256
P
pbrook 已提交
49

50 51
typedef struct SCSIDiskState SCSIDiskState;

52 53
typedef struct SCSIDiskReq {
    SCSIRequest req;
P
pbrook 已提交
54
    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
55 56
    uint64_t sector;
    uint32_t sector_count;
57
    uint32_t buflen;
58 59
    struct iovec iov;
    QEMUIOVector qiov;
60
    BlockAcctCookie acct;
61
} SCSIDiskReq;
P
pbrook 已提交
62

63
struct SCSIDiskState
P
pbrook 已提交
64
{
65
    SCSIDevice qdev;
66
    uint32_t removable;
67
    bool media_changed;
68
    bool media_event;
69
    bool eject_request;
70
    QEMUBH *bh;
G
Gerd Hoffmann 已提交
71
    char *version;
72
    char *serial;
73
    bool tray_open;
74
    bool tray_locked;
P
pbrook 已提交
75 76
};

77
static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
K
Kevin Wolf 已提交
78

P
Paolo Bonzini 已提交
79
static void scsi_free_request(SCSIRequest *req)
P
pbrook 已提交
80
{
P
Paolo Bonzini 已提交
81 82
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

83 84 85
    if (r->iov.iov_base) {
        qemu_vfree(r->iov.iov_base);
    }
P
pbrook 已提交
86 87
}

88 89
/* Helper function for command completion with sense.  */
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
G
Gerd Hoffmann 已提交
90
{
B
Blue Swirl 已提交
91 92
    DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
            r->req.tag, sense.key, sense.asc, sense.ascq);
93 94
    scsi_req_build_sense(&r->req, sense);
    scsi_req_complete(&r->req, CHECK_CONDITION);
P
pbrook 已提交
95 96 97
}

/* Cancel a pending data transfer.  */
98
static void scsi_cancel_io(SCSIRequest *req)
P
pbrook 已提交
99
{
100 101 102 103 104
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    DPRINTF("Cancel tag=0x%x\n", req->tag);
    if (r->req.aiocb) {
        bdrv_aio_cancel(r->req.aiocb);
105 106 107 108 109

        /* This reference was left in by scsi_*_data.  We take ownership of
         * it the moment scsi_req_cancel is called, independent of whether
         * bdrv_aio_cancel completes the request or not.  */
        scsi_req_unref(&r->req);
P
pbrook 已提交
110
    }
111
    r->req.aiocb = NULL;
P
pbrook 已提交
112 113
}

P
Paolo Bonzini 已提交
114
static uint32_t scsi_init_iovec(SCSIDiskReq *r, size_t size)
115
{
116 117 118
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (!r->iov.iov_base) {
P
Paolo Bonzini 已提交
119
        r->buflen = size;
120
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
121 122
    }
    r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
123 124 125 126
    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
    return r->qiov.size / 512;
}

P
Paolo Bonzini 已提交
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155
static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req)
{
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    qemu_put_be64s(f, &r->sector);
    qemu_put_be32s(f, &r->sector_count);
    qemu_put_be32s(f, &r->buflen);
    if (r->buflen && r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
    }
}

static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
{
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    qemu_get_be64s(f, &r->sector);
    qemu_get_be32s(f, &r->sector_count);
    qemu_get_be32s(f, &r->buflen);
    if (r->buflen) {
        scsi_init_iovec(r, r->buflen);
        if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
            qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
        }
    }

    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
}

156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
static void scsi_dma_complete(void *opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    bdrv_acct_done(s->qdev.conf.bs, &r->acct);

    if (ret) {
        if (scsi_handle_rw_error(r, -ret)) {
            goto done;
        }
    }

    r->sector += r->sector_count;
    r->sector_count = 0;
    scsi_req_complete(&r->req, GOOD);

done:
174 175 176
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
177 178
}

P
pbrook 已提交
179 180
static void scsi_read_complete(void * opaque, int ret)
{
181
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
182
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
183
    int n;
P
pbrook 已提交
184

P
Paolo Bonzini 已提交
185 186
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
187
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
188
    }
189

P
pbrook 已提交
190
    if (ret) {
191
        if (scsi_handle_rw_error(r, -ret)) {
192
            goto done;
K
Kevin Wolf 已提交
193
        }
P
pbrook 已提交
194
    }
K
Kevin Wolf 已提交
195

196
    DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
P
pbrook 已提交
197

198
    n = r->qiov.size / 512;
K
Kevin Wolf 已提交
199 200
    r->sector += n;
    r->sector_count -= n;
201
    scsi_req_data(&r->req, r->qiov.size);
202 203 204 205 206

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
207 208
}

209 210 211 212 213 214 215
static void scsi_flush_complete(void * opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
216
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
217 218 219
    }

    if (ret < 0) {
220
        if (scsi_handle_rw_error(r, -ret)) {
221
            goto done;
222 223 224 225
        }
    }

    scsi_req_complete(&r->req, GOOD);
226 227 228 229 230

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
231
}
K
Kevin Wolf 已提交
232

233 234
/* Read more data from scsi device into buffer.  */
static void scsi_read_data(SCSIRequest *req)
P
pbrook 已提交
235
{
236
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
K
Kevin Wolf 已提交
237
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
238 239
    uint32_t n;

P
pbrook 已提交
240
    if (r->sector_count == (uint32_t)-1) {
241
        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
P
pbrook 已提交
242
        r->sector_count = 0;
P
Paolo Bonzini 已提交
243
        scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
244
        return;
P
pbrook 已提交
245
    }
P
pbrook 已提交
246 247
    DPRINTF("Read sector_count=%d\n", r->sector_count);
    if (r->sector_count == 0) {
248 249
        /* This also clears the sense buffer for REQUEST SENSE.  */
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
250
        return;
P
pbrook 已提交
251 252
    }

253 254 255
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

256 257
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
258 259 260 261 262 263
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_read_complete(r, -EINVAL);
        return;
    }

264 265
    if (s->tray_open) {
        scsi_read_complete(r, -ENOMEDIUM);
266
        return;
267
    }
268

269 270 271 272 273 274
    if (r->req.sg) {
        dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_READ);
        r->req.resid -= r->req.sg->size;
        r->req.aiocb = dma_bdrv_read(s->qdev.conf.bs, r->req.sg, r->sector,
                                     scsi_dma_complete, r);
    } else {
P
Paolo Bonzini 已提交
275
        n = scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
276 277 278 279
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
        r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
                                      scsi_read_complete, r);
    }
P
pbrook 已提交
280 281
}

282 283 284 285 286 287 288
/*
 * scsi_handle_rw_error has two return values.  0 means that the error
 * must be ignored, 1 means that the error has been processed and the
 * caller should not do anything else for this request.  Note that
 * scsi_handle_rw_error always manages its reference counts, independent
 * of the return value.
 */
289
static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
K
Kevin Wolf 已提交
290
{
291
    int is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
292
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
293
    BlockErrorAction action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
294

295
    if (action == BLOCK_ERR_IGNORE) {
296
        bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
297
        return 0;
298
    }
299 300 301

    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
            || action == BLOCK_ERR_STOP_ANY) {
K
Kevin Wolf 已提交
302

303
        bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
304
        vm_stop(RUN_STATE_IO_ERROR);
305
        bdrv_iostatus_set_err(s->qdev.conf.bs, error);
306
        scsi_req_retry(&r->req);
307
    } else {
308
        switch (error) {
309 310 311
        case ENOMEDIUM:
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            break;
312
        case ENOMEM:
313
            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
314 315
            break;
        case EINVAL:
316
            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
317 318
            break;
        default:
319
            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
320
            break;
321
        }
322
        bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_REPORT, is_read);
323 324 325 326
    }
    return 1;
}

P
pbrook 已提交
327 328
static void scsi_write_complete(void * opaque, int ret)
{
329
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
330
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
331 332
    uint32_t n;

P
Paolo Bonzini 已提交
333 334
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
335
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
336
    }
337

P
pbrook 已提交
338
    if (ret) {
339
        if (scsi_handle_rw_error(r, -ret)) {
340
            goto done;
K
Kevin Wolf 已提交
341
        }
P
pbrook 已提交
342 343
    }

344
    n = r->qiov.size / 512;
345 346
    r->sector += n;
    r->sector_count -= n;
P
pbrook 已提交
347
    if (r->sector_count == 0) {
348
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
349
    } else {
P
Paolo Bonzini 已提交
350
        scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
351 352
        DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, r->qiov.size);
        scsi_req_data(&r->req, r->qiov.size);
P
pbrook 已提交
353
    }
354 355 356 357 358

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
359 360
}

361
static void scsi_write_data(SCSIRequest *req)
362
{
363
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
364
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
365 366
    uint32_t n;

367 368 369
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

370 371
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
372 373 374
    if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_write_complete(r, -EINVAL);
375
        return;
376 377
    }

378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394
    if (!r->req.sg && !r->qiov.size) {
        /* Called for the first time.  Ask the driver to send us more data.  */
        scsi_write_complete(r, 0);
        return;
    }
    if (s->tray_open) {
        scsi_write_complete(r, -ENOMEDIUM);
        return;
    }

    if (r->req.sg) {
        dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_WRITE);
        r->req.resid -= r->req.sg->size;
        r->req.aiocb = dma_bdrv_write(s->qdev.conf.bs, r->req.sg, r->sector,
                                      scsi_dma_complete, r);
    } else {
        n = r->qiov.size / 512;
395 396
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
        r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
397
                                       scsi_write_complete, r);
398
    }
P
pbrook 已提交
399
}
P
pbrook 已提交
400

P
pbrook 已提交
401
/* Return a pointer to the data buffer.  */
402
static uint8_t *scsi_get_buf(SCSIRequest *req)
P
pbrook 已提交
403
{
404
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
P
pbrook 已提交
405

406
    return (uint8_t *)r->iov.iov_base;
P
pbrook 已提交
407 408
}

409 410
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
{
G
Gerd Hoffmann 已提交
411
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428
    int buflen = 0;

    if (req->cmd.buf[1] & 0x2) {
        /* Command support data - optional, not implemented */
        BADF("optional INQUIRY command support request not implemented\n");
        return -1;
    }

    if (req->cmd.buf[1] & 0x1) {
        /* Vital product data */
        uint8_t page_code = req->cmd.buf[2];
        if (req->cmd.xfer < 4) {
            BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
                 "less than 4\n", page_code, req->cmd.xfer);
            return -1;
        }

429
        outbuf[buflen++] = s->qdev.type & 0x1f;
430 431 432 433 434
        outbuf[buflen++] = page_code ; // this page
        outbuf[buflen++] = 0x00;

        switch (page_code) {
        case 0x00: /* Supported page codes, mandatory */
H
Hannes Reinecke 已提交
435 436
        {
            int pages;
437 438
            DPRINTF("Inquiry EVPD[Supported pages] "
                    "buffer size %zd\n", req->cmd.xfer);
H
Hannes Reinecke 已提交
439
            pages = buflen++;
440
            outbuf[buflen++] = 0x00; // list of supported pages (this page)
441
            if (s->serial) {
442
                outbuf[buflen++] = 0x80; // unit serial number
443
            }
444
            outbuf[buflen++] = 0x83; // device identification
H
Hannes Reinecke 已提交
445
            if (s->qdev.type == TYPE_DISK) {
446 447
                outbuf[buflen++] = 0xb0; // block limits
                outbuf[buflen++] = 0xb2; // thin provisioning
H
Hannes Reinecke 已提交
448 449
            }
            outbuf[pages] = buflen - pages - 1; // number of pages
450
            break;
H
Hannes Reinecke 已提交
451
        }
452 453
        case 0x80: /* Device serial number, optional */
        {
454
            int l;
455

456 457 458 459 460 461
            if (!s->serial) {
                DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
                return -1;
            }

            l = strlen(s->serial);
462
            if (l > 20) {
463
                l = 20;
464
            }
465 466 467 468

            DPRINTF("Inquiry EVPD[Serial number] "
                    "buffer size %zd\n", req->cmd.xfer);
            outbuf[buflen++] = l;
469
            memcpy(outbuf+buflen, s->serial, l);
470 471 472 473 474 475
            buflen += l;
            break;
        }

        case 0x83: /* Device identification page, mandatory */
        {
476 477 478
            const char *str = s->serial ?: bdrv_get_device_name(s->qdev.conf.bs);
            int max_len = s->serial ? 20 : 255 - 8;
            int id_len = strlen(str);
479

480
            if (id_len > max_len) {
481
                id_len = max_len;
482
            }
483 484 485
            DPRINTF("Inquiry EVPD[Device identification] "
                    "buffer size %zd\n", req->cmd.xfer);

H
Hannes Reinecke 已提交
486
            outbuf[buflen++] = 4 + id_len;
487 488 489 490 491
            outbuf[buflen++] = 0x2; // ASCII
            outbuf[buflen++] = 0;   // not officially assigned
            outbuf[buflen++] = 0;   // reserved
            outbuf[buflen++] = id_len; // length of data following

492
            memcpy(outbuf+buflen, str, id_len);
493 494 495
            buflen += id_len;
            break;
        }
496
        case 0xb0: /* block limits */
C
Christoph Hellwig 已提交
497
        {
498 499
            unsigned int unmap_sectors =
                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
500 501 502 503
            unsigned int min_io_size =
                    s->qdev.conf.min_io_size / s->qdev.blocksize;
            unsigned int opt_io_size =
                    s->qdev.conf.opt_io_size / s->qdev.blocksize;
C
Christoph Hellwig 已提交
504

H
Hannes Reinecke 已提交
505
            if (s->qdev.type == TYPE_ROM) {
H
Hannes Reinecke 已提交
506 507 508 509
                DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                        page_code);
                return -1;
            }
C
Christoph Hellwig 已提交
510 511 512 513 514 515 516 517 518 519 520 521 522 523
            /* required VPD size with unmap support */
            outbuf[3] = buflen = 0x3c;

            memset(outbuf + 4, 0, buflen - 4);

            /* optimal transfer length granularity */
            outbuf[6] = (min_io_size >> 8) & 0xff;
            outbuf[7] = min_io_size & 0xff;

            /* optimal transfer length */
            outbuf[12] = (opt_io_size >> 24) & 0xff;
            outbuf[13] = (opt_io_size >> 16) & 0xff;
            outbuf[14] = (opt_io_size >> 8) & 0xff;
            outbuf[15] = opt_io_size & 0xff;
524 525 526 527 528 529 530 531 532 533 534 535 536 537 538

            /* optimal unmap granularity */
            outbuf[28] = (unmap_sectors >> 24) & 0xff;
            outbuf[29] = (unmap_sectors >> 16) & 0xff;
            outbuf[30] = (unmap_sectors >> 8) & 0xff;
            outbuf[31] = unmap_sectors & 0xff;
            break;
        }
        case 0xb2: /* thin provisioning */
        {
            outbuf[3] = buflen = 8;
            outbuf[4] = 0;
            outbuf[5] = 0x40; /* write same with unmap supported */
            outbuf[6] = 0;
            outbuf[7] = 0;
C
Christoph Hellwig 已提交
539 540
            break;
        }
541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564
        default:
            BADF("Error: unsupported Inquiry (EVPD[%02X]) "
                 "buffer size %zd\n", page_code, req->cmd.xfer);
            return -1;
        }
        /* done with EVPD */
        return buflen;
    }

    /* Standard INQUIRY data */
    if (req->cmd.buf[2] != 0) {
        BADF("Error: Inquiry (STANDARD) page or code "
             "is non-zero [%02X]\n", req->cmd.buf[2]);
        return -1;
    }

    /* PAGE CODE == 0 */
    if (req->cmd.xfer < 5) {
        BADF("Error: Inquiry (STANDARD) buffer size %zd "
             "is less than 5\n", req->cmd.xfer);
        return -1;
    }

    buflen = req->cmd.xfer;
565
    if (buflen > SCSI_MAX_INQUIRY_LEN) {
566
        buflen = SCSI_MAX_INQUIRY_LEN;
567
    }
568 569
    memset(outbuf, 0, buflen);

H
Hannes Reinecke 已提交
570
    outbuf[0] = s->qdev.type & 0x1f;
571
    outbuf[1] = s->removable ? 0x80 : 0;
H
Hannes Reinecke 已提交
572
    if (s->qdev.type == TYPE_ROM) {
L
Laszlo Ast 已提交
573
        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
574
    } else {
L
Laszlo Ast 已提交
575
        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
576
    }
L
Laszlo Ast 已提交
577
    memcpy(&outbuf[8], "QEMU    ", 8);
G
Gerd Hoffmann 已提交
578
    memset(&outbuf[32], 0, 4);
579
    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
580 581 582 583 584 585
    /*
     * We claim conformance to SPC-3, which is required for guests
     * to ask for modern features like READ CAPACITY(16) or the
     * block characteristics VPD page by default.  Not all of SPC-3
     * is actually implemented, but we're good enough.
     */
C
Christoph Hellwig 已提交
586
    outbuf[2] = 5;
587
    outbuf[3] = 2; /* Format 2 */
588 589 590 591 592 593 594 595 596

    if (buflen > 36) {
        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
    } else {
        /* If the allocation length of CDB is too small,
               the additional length is not adjusted */
        outbuf[4] = 36 - 5;
    }

597
    /* Sync data transfer and TCQ.  */
598
    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
599 600 601
    return buflen;
}

602 603 604 605 606 607
static inline bool media_is_dvd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
608
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
609 610
        return false;
    }
611
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
612 613 614
    return nb_sectors > CD_MAX_SECTORS;
}

615 616 617 618 619 620
static inline bool media_is_cd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
621
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
622 623
        return false;
    }
624
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
625 626 627
    return nb_sectors <= CD_MAX_SECTORS;
}

628 629 630
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
                                   uint8_t *outbuf)
{
631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651
    static const int rds_caps_size[5] = {
        [0] = 2048 + 4,
        [1] = 4 + 4,
        [3] = 188 + 4,
        [4] = 2048 + 4,
    };

    uint8_t media = r->req.cmd.buf[1];
    uint8_t layer = r->req.cmd.buf[6];
    uint8_t format = r->req.cmd.buf[7];
    int size = -1;

    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if (media != 0) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
        return -1;
    }

    if (format != 0xff) {
652
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            return -1;
        }
        if (media_is_cd(s)) {
            scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
            return -1;
        }
        if (format >= ARRAY_SIZE(rds_caps_size)) {
            return -1;
        }
        size = rds_caps_size[format];
        memset(outbuf, 0, size);
    }

    switch (format) {
    case 0x00: {
        /* Physical format information */
        uint64_t nb_sectors;
        if (layer != 0) {
            goto fail;
        }
674
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718

        outbuf[4] = 1;   /* DVD-ROM, part version 1 */
        outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
        outbuf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
        outbuf[7] = 0;   /* default densities */

        stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
        stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
        break;
    }

    case 0x01: /* DVD copyright information, all zeros */
        break;

    case 0x03: /* BCA information - invalid field for no BCA info */
        return -1;

    case 0x04: /* DVD disc manufacturing information, all zeros */
        break;

    case 0xff: { /* List capabilities */
        int i;
        size = 4;
        for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
            if (!rds_caps_size[i]) {
                continue;
            }
            outbuf[size] = i;
            outbuf[size + 1] = 0x40; /* Not writable, readable */
            stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
            size += 4;
        }
        break;
     }

    default:
        return -1;
    }

    /* Size of buffer, not including 2 byte size field */
    stw_be_p(outbuf, size - 2);
    return size;

fail:
719 720 721
    return -1;
}

722
static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
723
{
724 725 726 727 728
    uint8_t event_code, media_status;

    media_status = 0;
    if (s->tray_open) {
        media_status = MS_TRAY_OPEN;
729
    } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
730 731 732 733 734
        media_status = MS_MEDIA_PRESENT;
    }

    /* Event notification descriptor */
    event_code = MEC_NO_CHANGE;
735 736 737 738 739 740 741 742
    if (media_status != MS_TRAY_OPEN) {
        if (s->media_event) {
            event_code = MEC_NEW_MEDIA;
            s->media_event = false;
        } else if (s->eject_request) {
            event_code = MEC_EJECT_REQUESTED;
            s->eject_request = false;
        }
743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778
    }

    outbuf[0] = event_code;
    outbuf[1] = media_status;

    /* These fields are reserved, just clear them. */
    outbuf[2] = 0;
    outbuf[3] = 0;
    return 4;
}

static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
                                              uint8_t *outbuf)
{
    int size;
    uint8_t *buf = r->req.cmd.buf;
    uint8_t notification_class_request = buf[4];
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if ((buf[1] & 1) == 0) {
        /* asynchronous */
        return -1;
    }

    size = 4;
    outbuf[0] = outbuf[1] = 0;
    outbuf[3] = 1 << GESN_MEDIA; /* supported events */
    if (notification_class_request & (1 << GESN_MEDIA)) {
        outbuf[2] = GESN_MEDIA;
        size += scsi_event_status_media(s, &outbuf[size]);
    } else {
        outbuf[2] = 0x80;
    }
    stw_be_p(outbuf, size - 4);
    return size;
779 780
}

781
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
782
{
783 784
    int current;

785 786 787
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812
    current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
    memset(outbuf, 0, 40);
    stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
    stw_be_p(&outbuf[6], current);
    /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
    outbuf[10] = 0x03; /* persistent, current */
    outbuf[11] = 8; /* two profiles */
    stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
    outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
    stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
    outbuf[18] = (current == MMC_PROFILE_CD_ROM);
    /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
    stw_be_p(&outbuf[20], 1);
    outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[23] = 8;
    stl_be_p(&outbuf[24], 1); /* SCSI */
    outbuf[28] = 1; /* DBE = 1, mandatory */
    /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
    stw_be_p(&outbuf[32], 3);
    outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[35] = 4;
    outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
    /* TODO: Random readable, CD read, DVD read, drive serial number,
       power management */
    return 40;
813 814 815 816 817 818 819 820 821 822 823 824
}

static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
{
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    memset(outbuf, 0, 8);
    outbuf[5] = 1; /* CD-ROM */
    return 8;
}

825
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
826
                           int page_control)
827
{
828 829 830 831
    static const int mode_sense_valid[0x3f] = {
        [MODE_PAGE_HD_GEOMETRY]            = (1 << TYPE_DISK),
        [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
        [MODE_PAGE_CACHING]                = (1 << TYPE_DISK) | (1 << TYPE_ROM),
832 833
        [MODE_PAGE_R_W_ERROR]              = (1 << TYPE_DISK) | (1 << TYPE_ROM),
        [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
834 835 836
        [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
    };

837
    BlockDriverState *bdrv = s->qdev.conf.bs;
838
    int cylinders, heads, secs;
839
    uint8_t *p = *p_outbuf;
840

841 842 843 844 845 846
    if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
        return -1;
    }

    p[0] = page;

847 848 849 850 851 852
    /*
     * If Changeable Values are requested, a mask denoting those mode parameters
     * that are changeable shall be returned. As we currently don't support
     * parameter changes via MODE_SELECT all bits are returned set to zero.
     * The buffer was already menset to zero by the caller of this function.
     */
853
    switch (page) {
854
    case MODE_PAGE_HD_GEOMETRY:
855
        p[1] = 0x16;
856
        if (page_control == 1) { /* Changeable Values */
857
            break;
858
        }
859
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
860
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882
        p[2] = (cylinders >> 16) & 0xff;
        p[3] = (cylinders >> 8) & 0xff;
        p[4] = cylinders & 0xff;
        p[5] = heads & 0xff;
        /* Write precomp start cylinder, disabled */
        p[6] = (cylinders >> 16) & 0xff;
        p[7] = (cylinders >> 8) & 0xff;
        p[8] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[9] = (cylinders >> 16) & 0xff;
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Device step rate [ns], 200ns */
        p[12] = 0;
        p[13] = 200;
        /* Landing zone cylinder */
        p[14] = 0xff;
        p[15] =  0xff;
        p[16] = 0xff;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[20] = (5400 >> 8) & 0xff;
        p[21] = 5400 & 0xff;
883
        break;
884

885
    case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
886
        p[1] = 0x1e;
887
        if (page_control == 1) { /* Changeable Values */
888
            break;
889
        }
890 891 892 893
        /* Transfer rate [kbit/s], 5Mbit/s */
        p[2] = 5000 >> 8;
        p[3] = 5000 & 0xff;
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
894
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
895 896
        p[4] = heads & 0xff;
        p[5] = secs & 0xff;
P
Paolo Bonzini 已提交
897
        p[6] = s->qdev.blocksize >> 8;
898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920
        p[8] = (cylinders >> 8) & 0xff;
        p[9] = cylinders & 0xff;
        /* Write precomp start cylinder, disabled */
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[12] = (cylinders >> 8) & 0xff;
        p[13] = cylinders & 0xff;
        /* Device step rate [100us], 100us */
        p[14] = 0;
        p[15] = 1;
        /* Device step pulse width [us], 1us */
        p[16] = 1;
        /* Device head settle delay [100us], 100us */
        p[17] = 0;
        p[18] = 1;
        /* Motor on delay [0.1s], 0.1s */
        p[19] = 1;
        /* Motor off delay [0.1s], 0.1s */
        p[20] = 1;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[28] = (5400 >> 8) & 0xff;
        p[29] = 5400 & 0xff;
921
        break;
922

923
    case MODE_PAGE_CACHING:
924 925
        p[0] = 8;
        p[1] = 0x12;
926
        if (page_control == 1) { /* Changeable Values */
927
            break;
928
        }
929
        if (bdrv_enable_write_cache(s->qdev.conf.bs)) {
930 931
            p[2] = 4; /* WCE */
        }
932
        break;
933

934 935 936 937 938 939 940 941 942 943 944 945
    case MODE_PAGE_R_W_ERROR:
        p[1] = 10;
        p[2] = 0x80; /* Automatic Write Reallocation Enabled */
        if (s->qdev.type == TYPE_ROM) {
            p[3] = 0x20; /* Read Retry Count */
        }
        break;

    case MODE_PAGE_AUDIO_CTL:
        p[1] = 14;
        break;

946
    case MODE_PAGE_CAPABILITIES:
947
        p[1] = 0x14;
948
        if (page_control == 1) { /* Changeable Values */
949
            break;
950
        }
951 952 953

        p[2] = 0x3b; /* CD-R & CD-RW read */
        p[3] = 0; /* Writing not supported */
954 955 956 957 958
        p[4] = 0x7f; /* Audio, composite, digital out,
                        mode 2 form 1&2, multi session */
        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
                        RW corrected, C2 errors, ISRC,
                        UPC, Bar code */
959
        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
960 961 962
        /* Locking supported, jumper present, eject, tray */
        p[7] = 0; /* no volume & mute control, no
                     changer */
963
        p[8] = (50 * 176) >> 8; /* 50x read speed */
964
        p[9] = (50 * 176) & 0xff;
965 966 967
        p[10] = 2 >> 8; /* Two volume levels */
        p[11] = 2 & 0xff;
        p[12] = 2048 >> 8; /* 2M buffer */
968
        p[13] = 2048 & 0xff;
969
        p[14] = (16 * 176) >> 8; /* 16x read speed current */
970
        p[15] = (16 * 176) & 0xff;
971
        p[18] = (16 * 176) >> 8; /* 16x write speed */
972
        p[19] = (16 * 176) & 0xff;
973
        p[20] = (16 * 176) >> 8; /* 16x write speed current */
974
        p[21] = (16 * 176) & 0xff;
975
        break;
976 977

    default:
978
        return -1;
979
    }
980 981 982

    *p_outbuf += p[1] + 2;
    return p[1] + 2;
983 984
}

985
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
986
{
987
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
988
    uint64_t nb_sectors;
989
    int page, dbd, buflen, ret, page_control;
990
    uint8_t *p;
991
    uint8_t dev_specific_param;
992

993 994 995
    dbd = r->req.cmd.buf[1]  & 0x8;
    page = r->req.cmd.buf[2] & 0x3f;
    page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
996
    DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
997 998
        (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
    memset(outbuf, 0, r->req.cmd.xfer);
999 1000
    p = outbuf;

1001
    if (bdrv_is_read_only(s->qdev.conf.bs)) {
1002 1003 1004 1005 1006
        dev_specific_param = 0x80; /* Readonly.  */
    } else {
        dev_specific_param = 0x00;
    }

1007
    if (r->req.cmd.buf[0] == MODE_SENSE) {
1008 1009 1010 1011 1012 1013 1014 1015 1016
        p[1] = 0; /* Default media type.  */
        p[2] = dev_specific_param;
        p[3] = 0; /* Block descriptor length.  */
        p += 4;
    } else { /* MODE_SENSE_10 */
        p[2] = 0; /* Default media type.  */
        p[3] = dev_specific_param;
        p[6] = p[7] = 0; /* Block descriptor length.  */
        p += 8;
1017 1018
    }

1019
    /* MMC prescribes that CD/DVD drives have no block descriptors.  */
1020
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1021
    if (!dbd && s->qdev.type == TYPE_DISK && nb_sectors) {
1022
        if (r->req.cmd.buf[0] == MODE_SENSE) {
1023 1024 1025 1026
            outbuf[3] = 8; /* Block descriptor length  */
        } else { /* MODE_SENSE_10 */
            outbuf[7] = 8; /* Block descriptor length  */
        }
P
Paolo Bonzini 已提交
1027
        nb_sectors /= (s->qdev.blocksize / 512);
1028
        if (nb_sectors > 0xffffff) {
1029
            nb_sectors = 0;
1030
        }
1031 1032 1033 1034 1035 1036
        p[0] = 0; /* media density code */
        p[1] = (nb_sectors >> 16) & 0xff;
        p[2] = (nb_sectors >> 8) & 0xff;
        p[3] = nb_sectors & 0xff;
        p[4] = 0; /* reserved */
        p[5] = 0; /* bytes 5-7 are the sector size in bytes */
P
Paolo Bonzini 已提交
1037
        p[6] = s->qdev.blocksize >> 8;
1038 1039 1040 1041
        p[7] = 0;
        p += 8;
    }

1042 1043 1044 1045
    if (page_control == 3) {
        /* Saved Values */
        scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
        return -1;
1046 1047
    }

1048 1049 1050 1051 1052 1053 1054 1055 1056
    if (page == 0x3f) {
        for (page = 0; page <= 0x3e; page++) {
            mode_sense_page(s, page, &p, page_control);
        }
    } else {
        ret = mode_sense_page(s, page, &p, page_control);
        if (ret == -1) {
            return -1;
        }
1057 1058 1059
    }

    buflen = p - outbuf;
1060 1061 1062 1063 1064
    /*
     * The mode data length field specifies the length in bytes of the
     * following data that is available to be transferred. The mode data
     * length does not include itself.
     */
1065
    if (r->req.cmd.buf[0] == MODE_SENSE) {
1066 1067 1068 1069 1070
        outbuf[0] = buflen - 1;
    } else { /* MODE_SENSE_10 */
        outbuf[0] = ((buflen - 2) >> 8) & 0xff;
        outbuf[1] = (buflen - 2) & 0xff;
    }
1071 1072 1073
    return buflen;
}

1074 1075 1076 1077 1078 1079 1080 1081 1082
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    int start_track, format, msf, toclen;
    uint64_t nb_sectors;

    msf = req->cmd.buf[1] & 2;
    format = req->cmd.buf[2] & 0xf;
    start_track = req->cmd.buf[6];
1083
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1084
    DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
P
Paolo Bonzini 已提交
1085
    nb_sectors /= s->qdev.blocksize / 512;
1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106
    switch (format) {
    case 0:
        toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
        break;
    case 1:
        /* multi session : only a single session defined */
        toclen = 12;
        memset(outbuf, 0, 12);
        outbuf[1] = 0x0a;
        outbuf[2] = 0x01;
        outbuf[3] = 0x01;
        break;
    case 2:
        toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
        break;
    default:
        return -1;
    }
    return toclen;
}

1107
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1108 1109 1110 1111 1112 1113 1114
{
    SCSIRequest *req = &r->req;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    bool start = req->cmd.buf[4] & 1;
    bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */

    if (s->qdev.type == TYPE_ROM && loej) {
1115 1116
        if (!start && !s->tray_open && s->tray_locked) {
            scsi_check_condition(r,
1117
                                 bdrv_is_inserted(s->qdev.conf.bs)
1118 1119 1120
                                 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
                                 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
            return -1;
1121
        }
1122 1123 1124 1125 1126

        if (s->tray_open != !start) {
            bdrv_eject(s->qdev.conf.bs, !start);
            s->tray_open = !start;
        }
1127
    }
1128
    return 0;
1129 1130
}

1131
static int scsi_disk_emulate_command(SCSIDiskReq *r)
1132
{
1133
    SCSIRequest *req = &r->req;
1134 1135
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    uint64_t nb_sectors;
1136
    uint8_t *outbuf;
1137 1138
    int buflen = 0;

1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151
    if (!r->iov.iov_base) {
        /*
         * FIXME: we shouldn't return anything bigger than 4k, but the code
         * requires the buffer to be as big as req->cmd.xfer in several
         * places.  So, do not allow CDBs with a very large ALLOCATION
         * LENGTH.  The real fix would be to modify scsi_read_data and
         * dma_buf_read, so that they return data beyond the buflen
         * as all zeros.
         */
        if (req->cmd.xfer > 65536) {
            goto illegal_request;
        }
        r->buflen = MAX(4096, req->cmd.xfer);
1152
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
1153 1154 1155
    }

    outbuf = r->iov.iov_base;
1156 1157
    switch (req->cmd.buf[0]) {
    case TEST_UNIT_READY:
1158
        assert(!s->tray_open && bdrv_is_inserted(s->qdev.conf.bs));
H
Hannes Reinecke 已提交
1159
        break;
1160 1161
    case INQUIRY:
        buflen = scsi_disk_emulate_inquiry(req, outbuf);
1162
        if (buflen < 0) {
1163
            goto illegal_request;
1164
        }
H
Hannes Reinecke 已提交
1165
        break;
1166 1167
    case MODE_SENSE:
    case MODE_SENSE_10:
1168
        buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1169
        if (buflen < 0) {
1170
            goto illegal_request;
1171
        }
1172
        break;
1173 1174
    case READ_TOC:
        buflen = scsi_disk_emulate_read_toc(req, outbuf);
1175
        if (buflen < 0) {
1176
            goto illegal_request;
1177
        }
1178
        break;
1179
    case RESERVE:
1180
        if (req->cmd.buf[1] & 1) {
1181
            goto illegal_request;
1182
        }
1183 1184
        break;
    case RESERVE_10:
1185
        if (req->cmd.buf[1] & 3) {
1186
            goto illegal_request;
1187
        }
1188 1189
        break;
    case RELEASE:
1190
        if (req->cmd.buf[1] & 1) {
1191
            goto illegal_request;
1192
        }
1193 1194
        break;
    case RELEASE_10:
1195
        if (req->cmd.buf[1] & 3) {
1196
            goto illegal_request;
1197
        }
1198
        break;
1199
    case START_STOP:
1200 1201 1202
        if (scsi_disk_emulate_start_stop(r) < 0) {
            return -1;
        }
H
Hannes Reinecke 已提交
1203
        break;
1204
    case ALLOW_MEDIUM_REMOVAL:
1205
        s->tray_locked = req->cmd.buf[4] & 1;
1206
        bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
H
Hannes Reinecke 已提交
1207
        break;
1208
    case READ_CAPACITY_10:
1209
        /* The normal LEN field for this command is zero.  */
H
Hannes Reinecke 已提交
1210
        memset(outbuf, 0, 8);
1211
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1212
        if (!nb_sectors) {
1213 1214
            scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
            return -1;
1215
        }
1216 1217 1218
        if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
            goto illegal_request;
        }
P
Paolo Bonzini 已提交
1219
        nb_sectors /= s->qdev.blocksize / 512;
1220 1221 1222
        /* Returned value is the address of the last sector.  */
        nb_sectors--;
        /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1223
        s->qdev.max_lba = nb_sectors;
1224
        /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1225
        if (nb_sectors > UINT32_MAX) {
1226
            nb_sectors = UINT32_MAX;
1227
        }
1228 1229 1230 1231 1232 1233
        outbuf[0] = (nb_sectors >> 24) & 0xff;
        outbuf[1] = (nb_sectors >> 16) & 0xff;
        outbuf[2] = (nb_sectors >> 8) & 0xff;
        outbuf[3] = nb_sectors & 0xff;
        outbuf[4] = 0;
        outbuf[5] = 0;
P
Paolo Bonzini 已提交
1234
        outbuf[6] = s->qdev.blocksize >> 8;
1235 1236
        outbuf[7] = 0;
        buflen = 8;
H
Hannes Reinecke 已提交
1237
        break;
1238 1239 1240 1241 1242
    case REQUEST_SENSE:
        /* Just return "NO SENSE".  */
        buflen = scsi_build_sense(NULL, 0, outbuf, r->buflen,
                                  (req->cmd.buf[1] & 1) == 0);
        break;
1243 1244 1245 1246 1247 1248
    case MECHANISM_STATUS:
        buflen = scsi_emulate_mechanism_status(s, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
1249
    case GET_CONFIGURATION:
1250
        buflen = scsi_get_configuration(s, outbuf);
1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case GET_EVENT_STATUS_NOTIFICATION:
        buflen = scsi_get_event_status_notification(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case READ_DVD_STRUCTURE:
        buflen = scsi_read_dvd_structure(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
1266
        break;
1267
    case SERVICE_ACTION_IN_16:
1268
        /* Service Action In subcommands. */
1269
        if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1270 1271
            DPRINTF("SAI READ CAPACITY(16)\n");
            memset(outbuf, 0, req->cmd.xfer);
1272
            bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1273
            if (!nb_sectors) {
1274 1275
                scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
                return -1;
1276
            }
1277 1278 1279
            if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
                goto illegal_request;
            }
P
Paolo Bonzini 已提交
1280
            nb_sectors /= s->qdev.blocksize / 512;
1281 1282 1283
            /* Returned value is the address of the last sector.  */
            nb_sectors--;
            /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1284
            s->qdev.max_lba = nb_sectors;
1285 1286 1287 1288 1289 1290 1291 1292 1293 1294
            outbuf[0] = (nb_sectors >> 56) & 0xff;
            outbuf[1] = (nb_sectors >> 48) & 0xff;
            outbuf[2] = (nb_sectors >> 40) & 0xff;
            outbuf[3] = (nb_sectors >> 32) & 0xff;
            outbuf[4] = (nb_sectors >> 24) & 0xff;
            outbuf[5] = (nb_sectors >> 16) & 0xff;
            outbuf[6] = (nb_sectors >> 8) & 0xff;
            outbuf[7] = nb_sectors & 0xff;
            outbuf[8] = 0;
            outbuf[9] = 0;
P
Paolo Bonzini 已提交
1295
            outbuf[10] = s->qdev.blocksize >> 8;
1296
            outbuf[11] = 0;
C
Christoph Hellwig 已提交
1297 1298
            outbuf[12] = 0;
            outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1299 1300 1301 1302 1303 1304

            /* set TPE bit if the format supports discard */
            if (s->qdev.conf.discard_granularity) {
                outbuf[14] = 0x80;
            }

1305 1306 1307 1308 1309 1310
            /* Protection, exponent and lowest lba field left blank. */
            buflen = req->cmd.xfer;
            break;
        }
        DPRINTF("Unsupported Service Action In\n");
        goto illegal_request;
1311
    case VERIFY_10:
1312
        break;
1313
    default:
1314
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1315
        return -1;
1316
    }
1317
    buflen = MIN(buflen, req->cmd.xfer);
1318 1319 1320
    return buflen;

illegal_request:
1321 1322 1323
    if (r->req.status == -1) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
    }
1324
    return -1;
1325 1326
}

P
pbrook 已提交
1327 1328 1329 1330 1331
/* Execute a scsi command.  Returns the length of the data expected by the
   command.  This will be Positive for data transfers from the device
   (eg. disk reads), negative for transfers to the device (eg. disk writes),
   and zero if the command does not transfer any data.  */

1332
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
P
pbrook 已提交
1333
{
1334 1335
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
P
Paolo Bonzini 已提交
1336
    int32_t len;
P
pbrook 已提交
1337
    uint8_t command;
1338
    int rc;
P
pbrook 已提交
1339 1340

    command = buf[0];
1341
    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
1342

P
pbrook 已提交
1343 1344 1345
#ifdef DEBUG_SCSI
    {
        int i;
1346
        for (i = 1; i < r->req.cmd.len; i++) {
P
pbrook 已提交
1347 1348 1349 1350 1351
            printf(" 0x%02x", buf[i]);
        }
        printf("\n");
    }
#endif
1352

1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376
    switch (command) {
    case INQUIRY:
    case MODE_SENSE:
    case MODE_SENSE_10:
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
    case START_STOP:
    case ALLOW_MEDIUM_REMOVAL:
    case GET_CONFIGURATION:
    case GET_EVENT_STATUS_NOTIFICATION:
    case MECHANISM_STATUS:
    case REQUEST_SENSE:
        break;

    default:
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            return 0;
        }
        break;
    }

P
pbrook 已提交
1377
    switch (command) {
1378
    case TEST_UNIT_READY:
1379
    case INQUIRY:
1380 1381
    case MODE_SENSE:
    case MODE_SENSE_10:
1382 1383 1384 1385
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
1386
    case START_STOP:
1387
    case ALLOW_MEDIUM_REMOVAL:
1388
    case READ_CAPACITY_10:
1389
    case READ_TOC:
1390
    case READ_DVD_STRUCTURE:
1391
    case GET_CONFIGURATION:
1392 1393
    case GET_EVENT_STATUS_NOTIFICATION:
    case MECHANISM_STATUS:
1394
    case SERVICE_ACTION_IN_16:
1395
    case REQUEST_SENSE:
1396
    case VERIFY_10:
1397
        rc = scsi_disk_emulate_command(r);
1398
        if (rc < 0) {
1399
            return 0;
1400
        }
1401 1402

        r->iov.iov_len = rc;
1403
        break;
1404
    case SYNCHRONIZE_CACHE:
1405 1406
        /* The request is used as the AIO opaque value, so add a ref.  */
        scsi_req_ref(&r->req);
1407 1408
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
1409
        return 0;
1410 1411
    case READ_6:
    case READ_10:
G
Gerd Hoffmann 已提交
1412 1413
    case READ_12:
    case READ_16:
1414
        len = r->req.cmd.xfer / s->qdev.blocksize;
1415
        DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1416
        if (r->req.cmd.lba > s->qdev.max_lba) {
1417
            goto illegal_lba;
1418
        }
P
Paolo Bonzini 已提交
1419 1420
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1421
        break;
1422 1423
    case WRITE_6:
    case WRITE_10:
G
Gerd Hoffmann 已提交
1424 1425
    case WRITE_12:
    case WRITE_16:
1426
    case WRITE_VERIFY_10:
1427 1428
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1429
        len = r->req.cmd.xfer / s->qdev.blocksize;
1430
        DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
1431 1432
                (command & 0xe) == 0xe ? "And Verify " : "",
                r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1433
        if (r->req.cmd.lba > s->qdev.max_lba) {
1434
            goto illegal_lba;
1435
        }
P
Paolo Bonzini 已提交
1436 1437
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1438
        break;
1439
    case MODE_SELECT:
1440
        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1441 1442
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1443
        if (r->req.cmd.xfer > 12) {
1444 1445 1446 1447
            goto fail;
        }
        break;
    case MODE_SELECT_10:
1448
        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1449 1450
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1451
        if (r->req.cmd.xfer > 16) {
1452 1453 1454 1455
            goto fail;
        }
        break;
    case SEEK_10:
P
Paolo Bonzini 已提交
1456
        DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
P
Paolo Bonzini 已提交
1457
        if (r->req.cmd.lba > s->qdev.max_lba) {
1458 1459
            goto illegal_lba;
        }
1460 1461
        break;
    case WRITE_SAME_16:
1462
        len = r->req.cmd.xfer / s->qdev.blocksize;
1463 1464 1465 1466

        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
                r->req.cmd.lba, len);

P
Paolo Bonzini 已提交
1467
        if (r->req.cmd.lba > s->qdev.max_lba) {
1468 1469 1470 1471 1472 1473 1474 1475 1476 1477
            goto illegal_lba;
        }

        /*
         * We only support WRITE SAME with the unmap bit set for now.
         */
        if (!(buf[1] & 0x8)) {
            goto fail;
        }

P
Paolo Bonzini 已提交
1478 1479 1480
        rc = bdrv_discard(s->qdev.conf.bs,
                          r->req.cmd.lba * (s->qdev.blocksize / 512),
                          len * (s->qdev.blocksize / 512));
1481 1482 1483 1484 1485
        if (rc < 0) {
            /* XXX: better error code ?*/
            goto fail;
        }

1486
        break;
P
pbrook 已提交
1487
    default:
1488
        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1489
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1490
        return 0;
P
pbrook 已提交
1491
    fail:
1492
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1493
        return 0;
1494
    illegal_lba:
1495
        scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1496
        return 0;
P
pbrook 已提交
1497
    }
1498
    if (r->sector_count == 0 && r->iov.iov_len == 0) {
1499
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
1500
    }
1501
    len = r->sector_count * 512 + r->iov.iov_len;
1502 1503
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        return -len;
P
pbrook 已提交
1504
    } else {
1505
        if (!r->sector_count) {
P
pbrook 已提交
1506
            r->sector_count = -1;
1507
        }
1508
        return len;
P
pbrook 已提交
1509 1510 1511
    }
}

J
Jan Kiszka 已提交
1512 1513 1514 1515 1516
static void scsi_disk_reset(DeviceState *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
    uint64_t nb_sectors;

1517
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
J
Jan Kiszka 已提交
1518

1519
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
P
Paolo Bonzini 已提交
1520
    nb_sectors /= s->qdev.blocksize / 512;
J
Jan Kiszka 已提交
1521 1522 1523
    if (nb_sectors) {
        nb_sectors--;
    }
P
Paolo Bonzini 已提交
1524
    s->qdev.max_lba = nb_sectors;
J
Jan Kiszka 已提交
1525 1526 1527 1528 1529 1530
}

static void scsi_destroy(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);

1531
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1532
    blockdev_mark_auto_del(s->qdev.conf.bs);
G
Gerd Hoffmann 已提交
1533 1534
}

1535
static void scsi_cd_change_media_cb(void *opaque, bool load)
1536
{
1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551
    SCSIDiskState *s = opaque;

    /*
     * When a CD gets changed, we have to report an ejected state and
     * then a loaded state to guests so that they detect tray
     * open/close and media change events.  Guests that do not use
     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
     * states rely on this behavior.
     *
     * media_changed governs the state machine used for unit attention
     * report.  media_event is used by GET EVENT STATUS NOTIFICATION.
     */
    s->media_changed = load;
    s->tray_open = !load;
    s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
1552
    s->media_event = true;
1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563
    s->eject_request = false;
}

static void scsi_cd_eject_request_cb(void *opaque, bool force)
{
    SCSIDiskState *s = opaque;

    s->eject_request = true;
    if (force) {
        s->tray_locked = false;
    }
1564 1565
}

1566 1567 1568 1569 1570
static bool scsi_cd_is_tray_open(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_open;
}

1571 1572 1573 1574 1575 1576
static bool scsi_cd_is_medium_locked(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_locked;
}

static const BlockDevOps scsi_cd_block_ops = {
1577
    .change_media_cb = scsi_cd_change_media_cb,
1578
    .eject_request_cb = scsi_cd_eject_request_cb,
1579
    .is_tray_open = scsi_cd_is_tray_open,
1580 1581 1582
    .is_medium_locked = scsi_cd_is_medium_locked,
};

1583 1584 1585 1586 1587 1588 1589 1590 1591
static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    if (s->media_changed) {
        s->media_changed = false;
        s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
    }
}

1592
static int scsi_initfn(SCSIDevice *dev)
P
pbrook 已提交
1593
{
1594
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1595
    DriveInfo *dinfo;
P
pbrook 已提交
1596

1597
    if (!s->qdev.conf.bs) {
1598
        error_report("drive property not set");
1599 1600 1601
        return -1;
    }

1602
    if (!s->removable && !bdrv_is_inserted(s->qdev.conf.bs)) {
1603 1604 1605 1606
        error_report("Device needs media, but drive is empty");
        return -1;
    }

1607
    if (!s->serial) {
1608
        /* try to fall back to value set with legacy -drive serial=... */
1609
        dinfo = drive_get_by_blockdev(s->qdev.conf.bs);
1610
        if (*dinfo->serial) {
1611
            s->serial = g_strdup(dinfo->serial);
1612
        }
1613 1614
    }

1615
    if (!s->version) {
1616
        s->version = g_strdup(QEMU_VERSION);
1617 1618
    }

1619
    if (bdrv_is_sg(s->qdev.conf.bs)) {
1620
        error_report("unwanted /dev/sg*");
1621 1622 1623
        return -1;
    }

1624
    if (s->removable) {
1625
        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
P
pbrook 已提交
1626
    }
1627
    bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
1628

1629
    bdrv_iostatus_enable(s->qdev.conf.bs);
P
Paolo Bonzini 已提交
1630
    add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
1631 1632 1633
    return 0;
}

1634 1635
static int scsi_hd_initfn(SCSIDevice *dev)
{
1636 1637 1638 1639
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = s->qdev.conf.logical_block_size;
    s->qdev.type = TYPE_DISK;
    return scsi_initfn(&s->qdev);
1640 1641 1642 1643
}

static int scsi_cd_initfn(SCSIDevice *dev)
{
1644 1645 1646 1647 1648
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = 2048;
    s->qdev.type = TYPE_ROM;
    s->removable = true;
    return scsi_initfn(&s->qdev);
1649 1650 1651 1652
}

static int scsi_disk_initfn(SCSIDevice *dev)
{
1653
    DriveInfo *dinfo;
1654 1655

    if (!dev->conf.bs) {
1656
        return scsi_initfn(dev);  /* ... and die there */
1657 1658
    }

1659 1660 1661 1662 1663 1664
    dinfo = drive_get_by_blockdev(dev->conf.bs);
    if (dinfo->media_cd) {
        return scsi_cd_initfn(dev);
    } else {
        return scsi_hd_initfn(dev);
    }
1665 1666
}

P
Paolo Bonzini 已提交
1667
static const SCSIReqOps scsi_disk_reqops = {
P
Paolo Bonzini 已提交
1668
    .size         = sizeof(SCSIDiskReq),
1669 1670 1671 1672 1673 1674
    .free_req     = scsi_free_request,
    .send_command = scsi_send_command,
    .read_data    = scsi_read_data,
    .write_data   = scsi_write_data,
    .cancel_io    = scsi_cancel_io,
    .get_buf      = scsi_get_buf,
P
Paolo Bonzini 已提交
1675 1676
    .load_request = scsi_disk_load_request,
    .save_request = scsi_disk_save_request,
P
Paolo Bonzini 已提交
1677 1678
};

P
Paolo Bonzini 已提交
1679 1680
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
                                     uint8_t *buf, void *hba_private)
P
Paolo Bonzini 已提交
1681 1682 1683 1684 1685 1686 1687 1688
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
    SCSIRequest *req;

    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
    return req;
}

1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778
#ifdef __linux__
static int get_device_type(SCSIDiskState *s)
{
    BlockDriverState *bdrv = s->qdev.conf.bs;
    uint8_t cmd[16];
    uint8_t buf[36];
    uint8_t sensebuf[8];
    sg_io_hdr_t io_header;
    int ret;

    memset(cmd, 0, sizeof(cmd));
    memset(buf, 0, sizeof(buf));
    cmd[0] = INQUIRY;
    cmd[4] = sizeof(buf);

    memset(&io_header, 0, sizeof(io_header));
    io_header.interface_id = 'S';
    io_header.dxfer_direction = SG_DXFER_FROM_DEV;
    io_header.dxfer_len = sizeof(buf);
    io_header.dxferp = buf;
    io_header.cmdp = cmd;
    io_header.cmd_len = sizeof(cmd);
    io_header.mx_sb_len = sizeof(sensebuf);
    io_header.sbp = sensebuf;
    io_header.timeout = 6000; /* XXX */

    ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
    if (ret < 0 || io_header.driver_status || io_header.host_status) {
        return -1;
    }
    s->qdev.type = buf[0];
    s->removable = (buf[1] & 0x80) != 0;
    return 0;
}

static int scsi_block_initfn(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    int sg_version;
    int rc;

    if (!s->qdev.conf.bs) {
        error_report("scsi-block: drive property not set");
        return -1;
    }

    /* check we are using a driver managing SG_IO (version 3 and after) */
    if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
        sg_version < 30000) {
        error_report("scsi-block: scsi generic interface too old");
        return -1;
    }

    /* get device type from INQUIRY data */
    rc = get_device_type(s);
    if (rc < 0) {
        error_report("scsi-block: INQUIRY failed");
        return -1;
    }

    /* Make a guess for the block size, we'll fix it when the guest sends.
     * READ CAPACITY.  If they don't, they likely would assume these sizes
     * anyway. (TODO: check in /sys).
     */
    if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
        s->qdev.blocksize = 2048;
    } else {
        s->qdev.blocksize = 512;
    }
    return scsi_initfn(&s->qdev);
}

static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
                                           uint32_t lun, uint8_t *buf,
                                           void *hba_private)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);

    switch (buf[0]) {
    case READ_6:
    case READ_10:
    case READ_12:
    case READ_16:
    case WRITE_6:
    case WRITE_10:
    case WRITE_12:
    case WRITE_16:
    case WRITE_VERIFY_10:
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1779 1780 1781 1782 1783 1784 1785 1786 1787
        /* If we are not using O_DIRECT, we might read stale data from the
	 * host cache if writes were made using other commands than these
	 * ones (such as WRITE SAME or EXTENDED COPY, etc.).  So, without
	 * O_DIRECT everything must go through SG_IO.
         */
        if (!(s->qdev.conf.bs->open_flags & BDRV_O_NOCACHE)) {
            break;
        }

1788 1789 1790 1791 1792 1793 1794 1795 1796 1797
        /* MMC writing cannot be done via pread/pwrite, because it sometimes
         * involves writing beyond the maximum LBA or to negative LBA (lead-in).
         * And once you do these writes, reading from the block device is
         * unreliable, too.  It is even possible that reads deliver random data
         * from the host page cache (this is probably a Linux bug).
         *
         * We might use scsi_disk_reqops as long as no writing commands are
         * seen, but performance usually isn't paramount on optical media.  So,
         * just make scsi-block operate the same as scsi-generic for them.
         */
1798 1799 1800 1801 1802
        if (s->qdev.type == TYPE_ROM) {
            break;
	}
        return scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun,
                              hba_private);
1803 1804 1805 1806 1807 1808 1809
    }

    return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
                          hba_private);
}
#endif

1810 1811 1812 1813 1814
#define DEFINE_SCSI_DISK_PROPERTIES()                           \
    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)

1815 1816 1817 1818 1819 1820
static Property scsi_hd_properties[] = {
    DEFINE_SCSI_DISK_PROPERTIES(),
    DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
    DEFINE_PROP_END_OF_LIST(),
};

P
Paolo Bonzini 已提交
1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836
static const VMStateDescription vmstate_scsi_disk_state = {
    .name = "scsi-disk",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields = (VMStateField[]) {
        VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState),
        VMSTATE_BOOL(media_changed, SCSIDiskState),
        VMSTATE_BOOL(media_event, SCSIDiskState),
        VMSTATE_BOOL(eject_request, SCSIDiskState),
        VMSTATE_BOOL(tray_open, SCSIDiskState),
        VMSTATE_BOOL(tray_locked, SCSIDiskState),
        VMSTATE_END_OF_LIST()
    }
};

1837 1838
static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
{
1839
    DeviceClass *dc = DEVICE_CLASS(klass);
1840 1841 1842 1843 1844 1845
    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);

    sc->init         = scsi_hd_initfn;
    sc->destroy      = scsi_destroy;
    sc->alloc_req    = scsi_new_request;
    sc->unit_attention_reported = scsi_disk_unit_attention_reported;
1846 1847 1848 1849
    dc->fw_name = "disk";
    dc->desc = "virtual SCSI disk";
    dc->reset = scsi_disk_reset;
    dc->props = scsi_hd_properties;
P
Paolo Bonzini 已提交
1850
    dc->vmsd  = &vmstate_scsi_disk_state;
1851 1852
}

1853 1854 1855 1856 1857 1858 1859 1860 1861 1862
static TypeInfo scsi_hd_info = {
    .name          = "scsi-hd",
    .parent        = TYPE_SCSI_DEVICE,
    .instance_size = sizeof(SCSIDiskState),
    .class_init    = scsi_hd_class_initfn,
};

static Property scsi_cd_properties[] = {
    DEFINE_SCSI_DISK_PROPERTIES(),
    DEFINE_PROP_END_OF_LIST(),
1863 1864 1865 1866
};

static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
{
1867
    DeviceClass *dc = DEVICE_CLASS(klass);
1868 1869 1870 1871 1872 1873
    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);

    sc->init         = scsi_cd_initfn;
    sc->destroy      = scsi_destroy;
    sc->alloc_req    = scsi_new_request;
    sc->unit_attention_reported = scsi_disk_unit_attention_reported;
1874 1875 1876 1877
    dc->fw_name = "disk";
    dc->desc = "virtual SCSI CD-ROM";
    dc->reset = scsi_disk_reset;
    dc->props = scsi_cd_properties;
P
Paolo Bonzini 已提交
1878
    dc->vmsd  = &vmstate_scsi_disk_state;
1879 1880
}

1881 1882 1883 1884 1885
static TypeInfo scsi_cd_info = {
    .name          = "scsi-cd",
    .parent        = TYPE_SCSI_DEVICE,
    .instance_size = sizeof(SCSIDiskState),
    .class_init    = scsi_cd_class_initfn,
1886 1887
};

1888
#ifdef __linux__
1889 1890 1891 1892 1893
static Property scsi_block_properties[] = {
    DEFINE_SCSI_DISK_PROPERTIES(),
    DEFINE_PROP_END_OF_LIST(),
};

1894 1895
static void scsi_block_class_initfn(ObjectClass *klass, void *data)
{
1896
    DeviceClass *dc = DEVICE_CLASS(klass);
1897 1898 1899 1900 1901
    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);

    sc->init         = scsi_block_initfn;
    sc->destroy      = scsi_destroy;
    sc->alloc_req    = scsi_block_new_request;
1902 1903 1904 1905
    dc->fw_name = "disk";
    dc->desc = "SCSI block device passthrough";
    dc->reset = scsi_disk_reset;
    dc->props = scsi_block_properties;
P
Paolo Bonzini 已提交
1906
    dc->vmsd  = &vmstate_scsi_disk_state;
1907 1908
}

1909 1910 1911 1912 1913
static TypeInfo scsi_block_info = {
    .name          = "scsi-block",
    .parent        = TYPE_SCSI_DEVICE,
    .instance_size = sizeof(SCSIDiskState),
    .class_init    = scsi_block_class_initfn,
1914
};
1915
#endif
1916

1917 1918 1919 1920 1921 1922
static Property scsi_disk_properties[] = {
    DEFINE_SCSI_DISK_PROPERTIES(),
    DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
    DEFINE_PROP_END_OF_LIST(),
};

1923 1924
static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
{
1925
    DeviceClass *dc = DEVICE_CLASS(klass);
1926 1927 1928 1929 1930 1931
    SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);

    sc->init         = scsi_disk_initfn;
    sc->destroy      = scsi_destroy;
    sc->alloc_req    = scsi_new_request;
    sc->unit_attention_reported = scsi_disk_unit_attention_reported;
1932 1933 1934 1935
    dc->fw_name = "disk";
    dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
    dc->reset = scsi_disk_reset;
    dc->props = scsi_disk_properties;
P
Paolo Bonzini 已提交
1936
    dc->vmsd  = &vmstate_scsi_disk_state;
1937 1938
}

1939 1940 1941 1942 1943
static TypeInfo scsi_disk_info = {
    .name          = "scsi-disk",
    .parent        = TYPE_SCSI_DEVICE,
    .instance_size = sizeof(SCSIDiskState),
    .class_init    = scsi_disk_class_initfn,
1944 1945
};

A
Andreas Färber 已提交
1946
static void scsi_disk_register_types(void)
1947
{
1948 1949
    type_register_static(&scsi_hd_info);
    type_register_static(&scsi_cd_info);
1950
#ifdef __linux__
1951
    type_register_static(&scsi_block_info);
1952
#endif
1953
    type_register_static(&scsi_disk_info);
T
ths 已提交
1954
}
A
Andreas Färber 已提交
1955 1956

type_init(scsi_disk_register_types)