scsi-disk.c 40.5 KB
Newer Older
P
pbrook 已提交
1 2 3 4 5 6 7
/*
 * SCSI Device emulation
 *
 * Copyright (c) 2006 CodeSourcery.
 * Based on code by Fabrice Bellard
 *
 * Written by Paul Brook
8 9 10 11 12 13
 * Modifications:
 *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 *                                 when the allocation length of CDB is smaller
 *                                 than 36.
 *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 *                                 MODE SENSE response.
P
pbrook 已提交
14
 *
M
Matthew Fernandez 已提交
15
 * This code is licensed under the LGPL.
P
pbrook 已提交
16 17
 *
 * Note that this file only handles the SCSI architecture model and device
18 19
 * commands.  Emulation of interface/link layer protocols is handled by
 * the host adapter emulator.
P
pbrook 已提交
20 21 22 23 24
 */

//#define DEBUG_SCSI

#ifdef DEBUG_SCSI
25 26
#define DPRINTF(fmt, ...) \
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
27
#else
28
#define DPRINTF(fmt, ...) do {} while(0)
P
pbrook 已提交
29 30
#endif

31 32
#define BADF(fmt, ...) \
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
33

P
pbrook 已提交
34
#include "qemu-common.h"
35
#include "qemu-error.h"
G
Gerd Hoffmann 已提交
36
#include "scsi.h"
G
Gerd Hoffmann 已提交
37
#include "scsi-defs.h"
38
#include "sysemu.h"
B
Blue Swirl 已提交
39
#include "blockdev.h"
40
#include "block_int.h"
41

42
#define SCSI_DMA_BUF_SIZE    131072
43
#define SCSI_MAX_INQUIRY_LEN 256
P
pbrook 已提交
44

K
Kevin Wolf 已提交
45 46 47 48
#define SCSI_REQ_STATUS_RETRY           0x01
#define SCSI_REQ_STATUS_RETRY_TYPE_MASK 0x06
#define SCSI_REQ_STATUS_RETRY_READ      0x00
#define SCSI_REQ_STATUS_RETRY_WRITE     0x02
49
#define SCSI_REQ_STATUS_RETRY_FLUSH     0x04
50

51 52
typedef struct SCSIDiskState SCSIDiskState;

53 54
typedef struct SCSIDiskReq {
    SCSIRequest req;
P
pbrook 已提交
55
    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
56 57
    uint64_t sector;
    uint32_t sector_count;
58 59
    struct iovec iov;
    QEMUIOVector qiov;
60
    uint32_t status;
61
    BlockAcctCookie acct;
62
} SCSIDiskReq;
P
pbrook 已提交
63

64
struct SCSIDiskState
P
pbrook 已提交
65
{
66
    SCSIDevice qdev;
67
    BlockDriverState *bs;
P
pbrook 已提交
68 69 70
    /* The qemu block layer uses a fixed 512 byte sector size.
       This is the number of 512 byte blocks in a single scsi sector.  */
    int cluster_size;
71
    uint32_t removable;
72
    uint64_t max_lba;
73
    QEMUBH *bh;
G
Gerd Hoffmann 已提交
74
    char *version;
75
    char *serial;
76
    bool tray_open;
77
    bool tray_locked;
P
pbrook 已提交
78 79
};

K
Kevin Wolf 已提交
80
static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
81
static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf);
K
Kevin Wolf 已提交
82

P
Paolo Bonzini 已提交
83
static void scsi_free_request(SCSIRequest *req)
P
pbrook 已提交
84
{
P
Paolo Bonzini 已提交
85 86
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

87
    qemu_vfree(r->iov.iov_base);
P
pbrook 已提交
88 89
}

90 91
/* Helper function for command completion with sense.  */
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
G
Gerd Hoffmann 已提交
92
{
B
Blue Swirl 已提交
93 94
    DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
            r->req.tag, sense.key, sense.asc, sense.ascq);
95 96
    scsi_req_build_sense(&r->req, sense);
    scsi_req_complete(&r->req, CHECK_CONDITION);
P
pbrook 已提交
97 98 99
}

/* Cancel a pending data transfer.  */
100
static void scsi_cancel_io(SCSIRequest *req)
P
pbrook 已提交
101
{
102 103 104 105 106
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    DPRINTF("Cancel tag=0x%x\n", req->tag);
    if (r->req.aiocb) {
        bdrv_aio_cancel(r->req.aiocb);
P
pbrook 已提交
107
    }
108
    r->req.aiocb = NULL;
P
pbrook 已提交
109 110 111 112
}

static void scsi_read_complete(void * opaque, int ret)
{
113
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
114
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
115
    int n;
P
pbrook 已提交
116

P
Paolo Bonzini 已提交
117 118 119 120
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }
121

P
pbrook 已提交
122
    if (ret) {
K
Kevin Wolf 已提交
123 124 125
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_READ)) {
            return;
        }
P
pbrook 已提交
126
    }
K
Kevin Wolf 已提交
127

128
    DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->iov.iov_len);
P
pbrook 已提交
129

K
Kevin Wolf 已提交
130 131 132
    n = r->iov.iov_len / 512;
    r->sector += n;
    r->sector_count -= n;
P
Paolo Bonzini 已提交
133
    scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
134 135
}

136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153
static void scsi_flush_complete(void * opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }

    if (ret < 0) {
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_FLUSH)) {
            return;
        }
    }

    scsi_req_complete(&r->req, GOOD);
}
K
Kevin Wolf 已提交
154

155 156
/* Read more data from scsi device into buffer.  */
static void scsi_read_data(SCSIRequest *req)
P
pbrook 已提交
157
{
158
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
K
Kevin Wolf 已提交
159
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
160 161
    uint32_t n;

P
pbrook 已提交
162
    if (r->sector_count == (uint32_t)-1) {
163
        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
P
pbrook 已提交
164
        r->sector_count = 0;
P
Paolo Bonzini 已提交
165
        scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
166
        return;
P
pbrook 已提交
167
    }
P
pbrook 已提交
168 169
    DPRINTF("Read sector_count=%d\n", r->sector_count);
    if (r->sector_count == 0) {
170 171
        /* This also clears the sense buffer for REQUEST SENSE.  */
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
172
        return;
P
pbrook 已提交
173 174
    }

175 176 177
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

178 179 180 181 182 183
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_read_complete(r, -EINVAL);
        return;
    }

P
pbrook 已提交
184 185 186 187
    n = r->sector_count;
    if (n > SCSI_DMA_BUF_SIZE / 512)
        n = SCSI_DMA_BUF_SIZE / 512;

188 189 190
    if (s->tray_open) {
        scsi_read_complete(r, -ENOMEDIUM);
    }
191 192
    r->iov.iov_len = n * 512;
    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
193 194

    bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
195
    r->req.aiocb = bdrv_aio_readv(s->bs, r->sector, &r->qiov, n,
196
                              scsi_read_complete, r);
197 198 199
    if (r->req.aiocb == NULL) {
        scsi_read_complete(r, -EIO);
    }
P
pbrook 已提交
200 201
}

K
Kevin Wolf 已提交
202 203 204
static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
{
    int is_read = (type == SCSI_REQ_STATUS_RETRY_READ);
205
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
206
    BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
207

208
    if (action == BLOCK_ERR_IGNORE) {
K
Kevin Wolf 已提交
209
        bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
210
        return 0;
211
    }
212 213 214

    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
            || action == BLOCK_ERR_STOP_ANY) {
K
Kevin Wolf 已提交
215 216 217 218 219

        type &= SCSI_REQ_STATUS_RETRY_TYPE_MASK;
        r->status |= SCSI_REQ_STATUS_RETRY | type;

        bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
J
Jan Kiszka 已提交
220
        vm_stop(VMSTOP_DISKFULL);
221
    } else {
222 223
        switch (error) {
        case ENOMEM:
224
            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
225 226
            break;
        case EINVAL:
227
            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
228 229
            break;
        default:
230
            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
231
            break;
232
        }
K
Kevin Wolf 已提交
233
        bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
234 235 236 237
    }
    return 1;
}

P
pbrook 已提交
238 239
static void scsi_write_complete(void * opaque, int ret)
{
240
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
241
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
242
    uint32_t len;
243 244
    uint32_t n;

P
Paolo Bonzini 已提交
245 246 247 248
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }
249

P
pbrook 已提交
250
    if (ret) {
K
Kevin Wolf 已提交
251
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_WRITE)) {
252
            return;
K
Kevin Wolf 已提交
253
        }
P
pbrook 已提交
254 255
    }

256
    n = r->iov.iov_len / 512;
257 258
    r->sector += n;
    r->sector_count -= n;
P
pbrook 已提交
259
    if (r->sector_count == 0) {
260
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
261 262 263 264 265
    } else {
        len = r->sector_count * 512;
        if (len > SCSI_DMA_BUF_SIZE) {
            len = SCSI_DMA_BUF_SIZE;
        }
266
        r->iov.iov_len = len;
267
        DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
P
Paolo Bonzini 已提交
268
        scsi_req_data(&r->req, len);
P
pbrook 已提交
269 270 271
    }
}

272
static void scsi_write_data(SCSIRequest *req)
273
{
274
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
275
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
276 277
    uint32_t n;

278 279 280
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

281 282 283
    if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_write_complete(r, -EINVAL);
284
        return;
285 286
    }

287
    n = r->iov.iov_len / 512;
288
    if (n) {
289 290 291
        if (s->tray_open) {
            scsi_write_complete(r, -ENOMEDIUM);
        }
292
        qemu_iovec_init_external(&r->qiov, &r->iov, 1);
293 294

        bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
295
        r->req.aiocb = bdrv_aio_writev(s->bs, r->sector, &r->qiov, n,
296
                                   scsi_write_complete, r);
297
        if (r->req.aiocb == NULL) {
298
            scsi_write_complete(r, -ENOMEM);
299
        }
300 301 302 303
    } else {
        /* Invoke completion routine to fetch data from host.  */
        scsi_write_complete(r, 0);
    }
P
pbrook 已提交
304
}
P
pbrook 已提交
305

306
static void scsi_dma_restart_bh(void *opaque)
307
{
308
    SCSIDiskState *s = opaque;
309 310
    SCSIRequest *req;
    SCSIDiskReq *r;
311 312 313

    qemu_bh_delete(s->bh);
    s->bh = NULL;
314

315 316
    QTAILQ_FOREACH(req, &s->qdev.requests, next) {
        r = DO_UPCAST(SCSIDiskReq, req, req);
317
        if (r->status & SCSI_REQ_STATUS_RETRY) {
K
Kevin Wolf 已提交
318
            int status = r->status;
319 320
            int ret;

K
Kevin Wolf 已提交
321 322 323 324 325
            r->status &=
                ~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);

            switch (status & SCSI_REQ_STATUS_RETRY_TYPE_MASK) {
            case SCSI_REQ_STATUS_RETRY_READ:
326
                scsi_read_data(&r->req);
K
Kevin Wolf 已提交
327 328
                break;
            case SCSI_REQ_STATUS_RETRY_WRITE:
329
                scsi_write_data(&r->req);
K
Kevin Wolf 已提交
330
                break;
331 332 333
            case SCSI_REQ_STATUS_RETRY_FLUSH:
                ret = scsi_disk_emulate_command(r, r->iov.iov_base);
                if (ret == 0) {
334
                    scsi_req_complete(&r->req, GOOD);
335
                }
K
Kevin Wolf 已提交
336
            }
337 338 339 340
        }
    }
}

341 342
static void scsi_dma_restart_cb(void *opaque, int running, int reason)
{
343
    SCSIDiskState *s = opaque;
344 345 346 347 348 349 350 351 352 353

    if (!running)
        return;

    if (!s->bh) {
        s->bh = qemu_bh_new(scsi_dma_restart_bh, s);
        qemu_bh_schedule(s->bh);
    }
}

P
pbrook 已提交
354
/* Return a pointer to the data buffer.  */
355
static uint8_t *scsi_get_buf(SCSIRequest *req)
P
pbrook 已提交
356
{
357
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
P
pbrook 已提交
358

359
    return (uint8_t *)r->iov.iov_base;
P
pbrook 已提交
360 361
}

362 363
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
{
G
Gerd Hoffmann 已提交
364
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381
    int buflen = 0;

    if (req->cmd.buf[1] & 0x2) {
        /* Command support data - optional, not implemented */
        BADF("optional INQUIRY command support request not implemented\n");
        return -1;
    }

    if (req->cmd.buf[1] & 0x1) {
        /* Vital product data */
        uint8_t page_code = req->cmd.buf[2];
        if (req->cmd.xfer < 4) {
            BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
                 "less than 4\n", page_code, req->cmd.xfer);
            return -1;
        }

H
Hannes Reinecke 已提交
382
        if (s->qdev.type == TYPE_ROM) {
383 384 385 386 387 388 389 390 391
            outbuf[buflen++] = 5;
        } else {
            outbuf[buflen++] = 0;
        }
        outbuf[buflen++] = page_code ; // this page
        outbuf[buflen++] = 0x00;

        switch (page_code) {
        case 0x00: /* Supported page codes, mandatory */
H
Hannes Reinecke 已提交
392 393
        {
            int pages;
394 395
            DPRINTF("Inquiry EVPD[Supported pages] "
                    "buffer size %zd\n", req->cmd.xfer);
H
Hannes Reinecke 已提交
396
            pages = buflen++;
397
            outbuf[buflen++] = 0x00; // list of supported pages (this page)
398 399
            if (s->serial)
                outbuf[buflen++] = 0x80; // unit serial number
400
            outbuf[buflen++] = 0x83; // device identification
H
Hannes Reinecke 已提交
401
            if (s->qdev.type == TYPE_DISK) {
402 403
                outbuf[buflen++] = 0xb0; // block limits
                outbuf[buflen++] = 0xb2; // thin provisioning
H
Hannes Reinecke 已提交
404 405
            }
            outbuf[pages] = buflen - pages - 1; // number of pages
406
            break;
H
Hannes Reinecke 已提交
407
        }
408 409
        case 0x80: /* Device serial number, optional */
        {
410
            int l;
411

412 413 414 415 416 417
            if (!s->serial) {
                DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
                return -1;
            }

            l = strlen(s->serial);
418 419 420 421 422 423 424 425
            if (l > req->cmd.xfer)
                l = req->cmd.xfer;
            if (l > 20)
                l = 20;

            DPRINTF("Inquiry EVPD[Serial number] "
                    "buffer size %zd\n", req->cmd.xfer);
            outbuf[buflen++] = l;
426
            memcpy(outbuf+buflen, s->serial, l);
427 428 429 430 431 432 433
            buflen += l;
            break;
        }

        case 0x83: /* Device identification page, mandatory */
        {
            int max_len = 255 - 8;
434
            int id_len = strlen(bdrv_get_device_name(s->bs));
435 436 437 438 439 440

            if (id_len > max_len)
                id_len = max_len;
            DPRINTF("Inquiry EVPD[Device identification] "
                    "buffer size %zd\n", req->cmd.xfer);

H
Hannes Reinecke 已提交
441
            outbuf[buflen++] = 4 + id_len;
442 443 444 445 446
            outbuf[buflen++] = 0x2; // ASCII
            outbuf[buflen++] = 0;   // not officially assigned
            outbuf[buflen++] = 0;   // reserved
            outbuf[buflen++] = id_len; // length of data following

447
            memcpy(outbuf+buflen, bdrv_get_device_name(s->bs), id_len);
448 449 450
            buflen += id_len;
            break;
        }
451
        case 0xb0: /* block limits */
C
Christoph Hellwig 已提交
452
        {
453 454
            unsigned int unmap_sectors =
                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
455 456 457 458
            unsigned int min_io_size =
                    s->qdev.conf.min_io_size / s->qdev.blocksize;
            unsigned int opt_io_size =
                    s->qdev.conf.opt_io_size / s->qdev.blocksize;
C
Christoph Hellwig 已提交
459

H
Hannes Reinecke 已提交
460
            if (s->qdev.type == TYPE_ROM) {
H
Hannes Reinecke 已提交
461 462 463 464
                DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                        page_code);
                return -1;
            }
C
Christoph Hellwig 已提交
465 466 467 468 469 470 471 472 473 474 475 476 477 478
            /* required VPD size with unmap support */
            outbuf[3] = buflen = 0x3c;

            memset(outbuf + 4, 0, buflen - 4);

            /* optimal transfer length granularity */
            outbuf[6] = (min_io_size >> 8) & 0xff;
            outbuf[7] = min_io_size & 0xff;

            /* optimal transfer length */
            outbuf[12] = (opt_io_size >> 24) & 0xff;
            outbuf[13] = (opt_io_size >> 16) & 0xff;
            outbuf[14] = (opt_io_size >> 8) & 0xff;
            outbuf[15] = opt_io_size & 0xff;
479 480 481 482 483 484 485 486 487 488 489 490 491 492 493

            /* optimal unmap granularity */
            outbuf[28] = (unmap_sectors >> 24) & 0xff;
            outbuf[29] = (unmap_sectors >> 16) & 0xff;
            outbuf[30] = (unmap_sectors >> 8) & 0xff;
            outbuf[31] = unmap_sectors & 0xff;
            break;
        }
        case 0xb2: /* thin provisioning */
        {
            outbuf[3] = buflen = 8;
            outbuf[4] = 0;
            outbuf[5] = 0x40; /* write same with unmap supported */
            outbuf[6] = 0;
            outbuf[7] = 0;
C
Christoph Hellwig 已提交
494 495
            break;
        }
496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524
        default:
            BADF("Error: unsupported Inquiry (EVPD[%02X]) "
                 "buffer size %zd\n", page_code, req->cmd.xfer);
            return -1;
        }
        /* done with EVPD */
        return buflen;
    }

    /* Standard INQUIRY data */
    if (req->cmd.buf[2] != 0) {
        BADF("Error: Inquiry (STANDARD) page or code "
             "is non-zero [%02X]\n", req->cmd.buf[2]);
        return -1;
    }

    /* PAGE CODE == 0 */
    if (req->cmd.xfer < 5) {
        BADF("Error: Inquiry (STANDARD) buffer size %zd "
             "is less than 5\n", req->cmd.xfer);
        return -1;
    }

    buflen = req->cmd.xfer;
    if (buflen > SCSI_MAX_INQUIRY_LEN)
        buflen = SCSI_MAX_INQUIRY_LEN;

    memset(outbuf, 0, buflen);

H
Hannes Reinecke 已提交
525 526
    outbuf[0] = s->qdev.type & 0x1f;
    if (s->qdev.type == TYPE_ROM) {
527
        outbuf[1] = 0x80;
L
Laszlo Ast 已提交
528
        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
529
    } else {
530
        outbuf[1] = s->removable ? 0x80 : 0;
L
Laszlo Ast 已提交
531
        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
532
    }
L
Laszlo Ast 已提交
533
    memcpy(&outbuf[8], "QEMU    ", 8);
G
Gerd Hoffmann 已提交
534
    memset(&outbuf[32], 0, 4);
535
    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
536 537 538 539 540 541
    /*
     * We claim conformance to SPC-3, which is required for guests
     * to ask for modern features like READ CAPACITY(16) or the
     * block characteristics VPD page by default.  Not all of SPC-3
     * is actually implemented, but we're good enough.
     */
C
Christoph Hellwig 已提交
542
    outbuf[2] = 5;
543
    outbuf[3] = 2; /* Format 2 */
544 545 546 547 548 549 550 551 552

    if (buflen > 36) {
        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
    } else {
        /* If the allocation length of CDB is too small,
               the additional length is not adjusted */
        outbuf[4] = 36 - 5;
    }

553 554 555 556 557
    /* Sync data transfer and TCQ.  */
    outbuf[7] = 0x10 | (req->bus->tcq ? 0x02 : 0);
    return buflen;
}

558
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
559
                           int page_control)
560
{
561
    BlockDriverState *bdrv = s->bs;
562
    int cylinders, heads, secs;
563
    uint8_t *p = *p_outbuf;
564

565 566 567 568 569 570
    /*
     * If Changeable Values are requested, a mask denoting those mode parameters
     * that are changeable shall be returned. As we currently don't support
     * parameter changes via MODE_SELECT all bits are returned set to zero.
     * The buffer was already menset to zero by the caller of this function.
     */
571 572
    switch (page) {
    case 4: /* Rigid disk device geometry page. */
573 574 575
        if (s->qdev.type == TYPE_ROM) {
            return -1;
        }
576 577
        p[0] = 4;
        p[1] = 0x16;
578
        if (page_control == 1) { /* Changeable Values */
579
            break;
580
        }
581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604
        /* if a geometry hint is available, use it */
        bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
        p[2] = (cylinders >> 16) & 0xff;
        p[3] = (cylinders >> 8) & 0xff;
        p[4] = cylinders & 0xff;
        p[5] = heads & 0xff;
        /* Write precomp start cylinder, disabled */
        p[6] = (cylinders >> 16) & 0xff;
        p[7] = (cylinders >> 8) & 0xff;
        p[8] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[9] = (cylinders >> 16) & 0xff;
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Device step rate [ns], 200ns */
        p[12] = 0;
        p[13] = 200;
        /* Landing zone cylinder */
        p[14] = 0xff;
        p[15] =  0xff;
        p[16] = 0xff;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[20] = (5400 >> 8) & 0xff;
        p[21] = 5400 & 0xff;
605
        break;
606 607

    case 5: /* Flexible disk device geometry page. */
608 609 610
        if (s->qdev.type == TYPE_ROM) {
            return -1;
        }
611 612
        p[0] = 5;
        p[1] = 0x1e;
613
        if (page_control == 1) { /* Changeable Values */
614
            break;
615
        }
616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646
        /* Transfer rate [kbit/s], 5Mbit/s */
        p[2] = 5000 >> 8;
        p[3] = 5000 & 0xff;
        /* if a geometry hint is available, use it */
        bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
        p[4] = heads & 0xff;
        p[5] = secs & 0xff;
        p[6] = s->cluster_size * 2;
        p[8] = (cylinders >> 8) & 0xff;
        p[9] = cylinders & 0xff;
        /* Write precomp start cylinder, disabled */
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[12] = (cylinders >> 8) & 0xff;
        p[13] = cylinders & 0xff;
        /* Device step rate [100us], 100us */
        p[14] = 0;
        p[15] = 1;
        /* Device step pulse width [us], 1us */
        p[16] = 1;
        /* Device head settle delay [100us], 100us */
        p[17] = 0;
        p[18] = 1;
        /* Motor on delay [0.1s], 0.1s */
        p[19] = 1;
        /* Motor off delay [0.1s], 0.1s */
        p[20] = 1;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[28] = (5400 >> 8) & 0xff;
        p[29] = 5400 & 0xff;
647
        break;
648 649 650 651

    case 8: /* Caching page.  */
        p[0] = 8;
        p[1] = 0x12;
652
        if (page_control == 1) { /* Changeable Values */
653
            break;
654
        }
655
        if (bdrv_enable_write_cache(s->bs)) {
656 657
            p[2] = 4; /* WCE */
        }
658
        break;
659 660

    case 0x2a: /* CD Capabilities and Mechanical Status page. */
661 662 663
        if (s->qdev.type != TYPE_ROM) {
            return -1;
        }
664 665
        p[0] = 0x2a;
        p[1] = 0x14;
666
        if (page_control == 1) { /* Changeable Values */
667
            break;
668
        }
669 670 671 672 673 674 675
        p[2] = 3; // CD-R & CD-RW read
        p[3] = 0; // Writing not supported
        p[4] = 0x7f; /* Audio, composite, digital out,
                        mode 2 form 1&2, multi session */
        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
                        RW corrected, C2 errors, ISRC,
                        UPC, Bar code */
676
        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
677 678 679 680 681 682 683 684 685 686 687 688 689 690 691
        /* Locking supported, jumper present, eject, tray */
        p[7] = 0; /* no volume & mute control, no
                     changer */
        p[8] = (50 * 176) >> 8; // 50x read speed
        p[9] = (50 * 176) & 0xff;
        p[10] = 0 >> 8; // No volume
        p[11] = 0 & 0xff;
        p[12] = 2048 >> 8; // 2M buffer
        p[13] = 2048 & 0xff;
        p[14] = (16 * 176) >> 8; // 16x read speed current
        p[15] = (16 * 176) & 0xff;
        p[18] = (16 * 176) >> 8; // 16x write speed
        p[19] = (16 * 176) & 0xff;
        p[20] = (16 * 176) >> 8; // 16x write speed current
        p[21] = (16 * 176) & 0xff;
692
        break;
693 694

    default:
695
        return -1;
696
    }
697 698 699

    *p_outbuf += p[1] + 2;
    return p[1] + 2;
700 701
}

702
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
703
{
704
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
705
    uint64_t nb_sectors;
706
    int page, dbd, buflen, ret, page_control;
707
    uint8_t *p;
708
    uint8_t dev_specific_param;
709

710 711 712
    dbd = r->req.cmd.buf[1]  & 0x8;
    page = r->req.cmd.buf[2] & 0x3f;
    page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
713
    DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
714 715
        (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
    memset(outbuf, 0, r->req.cmd.xfer);
716 717
    p = outbuf;

718
    if (bdrv_is_read_only(s->bs)) {
719 720 721 722 723
        dev_specific_param = 0x80; /* Readonly.  */
    } else {
        dev_specific_param = 0x00;
    }

724
    if (r->req.cmd.buf[0] == MODE_SENSE) {
725 726 727 728 729 730 731 732 733
        p[1] = 0; /* Default media type.  */
        p[2] = dev_specific_param;
        p[3] = 0; /* Block descriptor length.  */
        p += 4;
    } else { /* MODE_SENSE_10 */
        p[2] = 0; /* Default media type.  */
        p[3] = dev_specific_param;
        p[6] = p[7] = 0; /* Block descriptor length.  */
        p += 8;
734 735
    }

736
    bdrv_get_geometry(s->bs, &nb_sectors);
737
    if (!dbd && nb_sectors) {
738
        if (r->req.cmd.buf[0] == MODE_SENSE) {
739 740 741 742
            outbuf[3] = 8; /* Block descriptor length  */
        } else { /* MODE_SENSE_10 */
            outbuf[7] = 8; /* Block descriptor length  */
        }
743 744
        nb_sectors /= s->cluster_size;
        if (nb_sectors > 0xffffff)
745
            nb_sectors = 0;
746 747 748 749 750 751 752 753 754 755 756
        p[0] = 0; /* media density code */
        p[1] = (nb_sectors >> 16) & 0xff;
        p[2] = (nb_sectors >> 8) & 0xff;
        p[3] = nb_sectors & 0xff;
        p[4] = 0; /* reserved */
        p[5] = 0; /* bytes 5-7 are the sector size in bytes */
        p[6] = s->cluster_size * 2;
        p[7] = 0;
        p += 8;
    }

757 758 759 760
    if (page_control == 3) {
        /* Saved Values */
        scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
        return -1;
761 762
    }

763 764 765 766 767 768 769 770 771
    if (page == 0x3f) {
        for (page = 0; page <= 0x3e; page++) {
            mode_sense_page(s, page, &p, page_control);
        }
    } else {
        ret = mode_sense_page(s, page, &p, page_control);
        if (ret == -1) {
            return -1;
        }
772 773 774
    }

    buflen = p - outbuf;
775 776 777 778 779
    /*
     * The mode data length field specifies the length in bytes of the
     * following data that is available to be transferred. The mode data
     * length does not include itself.
     */
780
    if (r->req.cmd.buf[0] == MODE_SENSE) {
781 782 783 784 785
        outbuf[0] = buflen - 1;
    } else { /* MODE_SENSE_10 */
        outbuf[0] = ((buflen - 2) >> 8) & 0xff;
        outbuf[1] = (buflen - 2) & 0xff;
    }
786 787
    if (buflen > r->req.cmd.xfer)
        buflen = r->req.cmd.xfer;
788 789 790
    return buflen;
}

791 792 793 794 795 796 797 798 799
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    int start_track, format, msf, toclen;
    uint64_t nb_sectors;

    msf = req->cmd.buf[1] & 2;
    format = req->cmd.buf[2] & 0xf;
    start_track = req->cmd.buf[6];
800
    bdrv_get_geometry(s->bs, &nb_sectors);
801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825
    DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
    nb_sectors /= s->cluster_size;
    switch (format) {
    case 0:
        toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
        break;
    case 1:
        /* multi session : only a single session defined */
        toclen = 12;
        memset(outbuf, 0, 12);
        outbuf[1] = 0x0a;
        outbuf[2] = 0x01;
        outbuf[3] = 0x01;
        break;
    case 2:
        toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
        break;
    default:
        return -1;
    }
    if (toclen > req->cmd.xfer)
        toclen = req->cmd.xfer;
    return toclen;
}

826
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
827 828 829 830 831 832 833
{
    SCSIRequest *req = &r->req;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    bool start = req->cmd.buf[4] & 1;
    bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */

    if (s->qdev.type == TYPE_ROM && loej) {
834 835 836 837 838 839
        if (!start && !s->tray_open && s->tray_locked) {
            scsi_check_condition(r,
                                 bdrv_is_inserted(s->bs)
                                 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
                                 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
            return -1;
840
        }
841
        bdrv_eject(s->bs, !start);
842
        s->tray_open = !start;
843
    }
844
    return 0;
845 846
}

847
static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
848
{
849
    SCSIRequest *req = &r->req;
850 851
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    uint64_t nb_sectors;
852 853 854 855
    int buflen = 0;

    switch (req->cmd.buf[0]) {
    case TEST_UNIT_READY:
856
        if (s->tray_open || !bdrv_is_inserted(s->bs))
857
            goto not_ready;
H
Hannes Reinecke 已提交
858
        break;
859 860 861 862
    case INQUIRY:
        buflen = scsi_disk_emulate_inquiry(req, outbuf);
        if (buflen < 0)
            goto illegal_request;
H
Hannes Reinecke 已提交
863
        break;
864 865
    case MODE_SENSE:
    case MODE_SENSE_10:
866
        buflen = scsi_disk_emulate_mode_sense(r, outbuf);
867 868 869
        if (buflen < 0)
            goto illegal_request;
        break;
870 871 872 873 874
    case READ_TOC:
        buflen = scsi_disk_emulate_read_toc(req, outbuf);
        if (buflen < 0)
            goto illegal_request;
        break;
875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890
    case RESERVE:
        if (req->cmd.buf[1] & 1)
            goto illegal_request;
        break;
    case RESERVE_10:
        if (req->cmd.buf[1] & 3)
            goto illegal_request;
        break;
    case RELEASE:
        if (req->cmd.buf[1] & 1)
            goto illegal_request;
        break;
    case RELEASE_10:
        if (req->cmd.buf[1] & 3)
            goto illegal_request;
        break;
891
    case START_STOP:
892 893 894
        if (scsi_disk_emulate_start_stop(r) < 0) {
            return -1;
        }
H
Hannes Reinecke 已提交
895
        break;
896
    case ALLOW_MEDIUM_REMOVAL:
897
        s->tray_locked = req->cmd.buf[4] & 1;
898
        bdrv_lock_medium(s->bs, req->cmd.buf[4] & 1);
H
Hannes Reinecke 已提交
899
        break;
900
    case READ_CAPACITY_10:
901
        /* The normal LEN field for this command is zero.  */
H
Hannes Reinecke 已提交
902 903
        memset(outbuf, 0, 8);
        bdrv_get_geometry(s->bs, &nb_sectors);
904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922
        if (!nb_sectors)
            goto not_ready;
        nb_sectors /= s->cluster_size;
        /* Returned value is the address of the last sector.  */
        nb_sectors--;
        /* Remember the new size for read/write sanity checking. */
        s->max_lba = nb_sectors;
        /* Clip to 2TB, instead of returning capacity modulo 2TB. */
        if (nb_sectors > UINT32_MAX)
            nb_sectors = UINT32_MAX;
        outbuf[0] = (nb_sectors >> 24) & 0xff;
        outbuf[1] = (nb_sectors >> 16) & 0xff;
        outbuf[2] = (nb_sectors >> 8) & 0xff;
        outbuf[3] = nb_sectors & 0xff;
        outbuf[4] = 0;
        outbuf[5] = 0;
        outbuf[6] = s->cluster_size * 2;
        outbuf[7] = 0;
        buflen = 8;
H
Hannes Reinecke 已提交
923
        break;
924 925 926 927 928 929 930
    case GET_CONFIGURATION:
        memset(outbuf, 0, 8);
        /* ??? This should probably return much more information.  For now
           just return the basic header indicating the CD-ROM profile.  */
        outbuf[7] = 8; // CD-ROM
        buflen = 8;
        break;
931
    case SERVICE_ACTION_IN_16:
932
        /* Service Action In subcommands. */
933
        if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
934 935
            DPRINTF("SAI READ CAPACITY(16)\n");
            memset(outbuf, 0, req->cmd.xfer);
936
            bdrv_get_geometry(s->bs, &nb_sectors);
937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955
            if (!nb_sectors)
                goto not_ready;
            nb_sectors /= s->cluster_size;
            /* Returned value is the address of the last sector.  */
            nb_sectors--;
            /* Remember the new size for read/write sanity checking. */
            s->max_lba = nb_sectors;
            outbuf[0] = (nb_sectors >> 56) & 0xff;
            outbuf[1] = (nb_sectors >> 48) & 0xff;
            outbuf[2] = (nb_sectors >> 40) & 0xff;
            outbuf[3] = (nb_sectors >> 32) & 0xff;
            outbuf[4] = (nb_sectors >> 24) & 0xff;
            outbuf[5] = (nb_sectors >> 16) & 0xff;
            outbuf[6] = (nb_sectors >> 8) & 0xff;
            outbuf[7] = nb_sectors & 0xff;
            outbuf[8] = 0;
            outbuf[9] = 0;
            outbuf[10] = s->cluster_size * 2;
            outbuf[11] = 0;
C
Christoph Hellwig 已提交
956 957
            outbuf[12] = 0;
            outbuf[13] = get_physical_block_exp(&s->qdev.conf);
958 959 960 961 962 963

            /* set TPE bit if the format supports discard */
            if (s->qdev.conf.discard_granularity) {
                outbuf[14] = 0x80;
            }

964 965 966 967 968 969
            /* Protection, exponent and lowest lba field left blank. */
            buflen = req->cmd.xfer;
            break;
        }
        DPRINTF("Unsupported Service Action In\n");
        goto illegal_request;
970
    case VERIFY_10:
971
        break;
972
    default:
973
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
974
        return -1;
975 976 977 978
    }
    return buflen;

not_ready:
979
    if (s->tray_open || !bdrv_is_inserted(s->bs)) {
980
        scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
981
    } else {
982
        scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
983
    }
984
    return -1;
985 986

illegal_request:
987 988 989
    if (r->req.status == -1) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
    }
990
    return -1;
991 992
}

P
pbrook 已提交
993 994 995 996 997
/* Execute a scsi command.  Returns the length of the data expected by the
   command.  This will be Positive for data transfers from the device
   (eg. disk reads), negative for transfers to the device (eg. disk writes),
   and zero if the command does not transfer any data.  */

998
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
P
pbrook 已提交
999
{
1000 1001
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
P
Paolo Bonzini 已提交
1002
    int32_t len;
P
pbrook 已提交
1003 1004
    uint8_t command;
    uint8_t *outbuf;
1005
    int rc;
P
pbrook 已提交
1006 1007

    command = buf[0];
1008
    outbuf = (uint8_t *)r->iov.iov_base;
1009
    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
1010

P
pbrook 已提交
1011 1012 1013
#ifdef DEBUG_SCSI
    {
        int i;
1014
        for (i = 1; i < r->req.cmd.len; i++) {
P
pbrook 已提交
1015 1016 1017 1018 1019
            printf(" 0x%02x", buf[i]);
        }
        printf("\n");
    }
#endif
1020

P
pbrook 已提交
1021
    switch (command) {
1022
    case TEST_UNIT_READY:
1023
    case INQUIRY:
1024 1025
    case MODE_SENSE:
    case MODE_SENSE_10:
1026 1027 1028 1029
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
1030
    case START_STOP:
1031
    case ALLOW_MEDIUM_REMOVAL:
1032
    case READ_CAPACITY_10:
1033
    case READ_TOC:
1034
    case GET_CONFIGURATION:
1035
    case SERVICE_ACTION_IN_16:
1036
    case VERIFY_10:
1037 1038
        rc = scsi_disk_emulate_command(r, outbuf);
        if (rc < 0) {
1039
            return 0;
1040
        }
1041 1042

        r->iov.iov_len = rc;
1043
        break;
1044 1045 1046 1047 1048 1049 1050
    case SYNCHRONIZE_CACHE:
        bdrv_acct_start(s->bs, &r->acct, 0, BDRV_ACCT_FLUSH);
        r->req.aiocb = bdrv_aio_flush(s->bs, scsi_flush_complete, r);
        if (r->req.aiocb == NULL) {
            scsi_flush_complete(r, -EIO);
        }
        return 0;
1051 1052
    case READ_6:
    case READ_10:
G
Gerd Hoffmann 已提交
1053 1054
    case READ_12:
    case READ_16:
1055
        len = r->req.cmd.xfer / s->qdev.blocksize;
1056 1057
        DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
        if (r->req.cmd.lba > s->max_lba)
1058
            goto illegal_lba;
1059
        r->sector = r->req.cmd.lba * s->cluster_size;
P
pbrook 已提交
1060
        r->sector_count = len * s->cluster_size;
P
pbrook 已提交
1061
        break;
1062 1063
    case WRITE_6:
    case WRITE_10:
G
Gerd Hoffmann 已提交
1064 1065
    case WRITE_12:
    case WRITE_16:
1066
    case WRITE_VERIFY_10:
1067 1068
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1069
        len = r->req.cmd.xfer / s->qdev.blocksize;
1070
        DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
1071 1072 1073
                (command & 0xe) == 0xe ? "And Verify " : "",
                r->req.cmd.lba, len);
        if (r->req.cmd.lba > s->max_lba)
1074
            goto illegal_lba;
1075
        r->sector = r->req.cmd.lba * s->cluster_size;
P
pbrook 已提交
1076
        r->sector_count = len * s->cluster_size;
P
pbrook 已提交
1077
        break;
1078
    case MODE_SELECT:
1079
        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1080 1081
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1082
        if (r->req.cmd.xfer > 12) {
1083 1084 1085 1086
            goto fail;
        }
        break;
    case MODE_SELECT_10:
1087
        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1088 1089
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1090
        if (r->req.cmd.xfer > 16) {
1091 1092 1093 1094 1095
            goto fail;
        }
        break;
    case SEEK_6:
    case SEEK_10:
1096 1097 1098
        DPRINTF("Seek(%d) (sector %" PRId64 ")\n", command == SEEK_6 ? 6 : 10,
                r->req.cmd.lba);
        if (r->req.cmd.lba > s->max_lba) {
1099 1100
            goto illegal_lba;
        }
1101 1102
        break;
    case WRITE_SAME_16:
1103
        len = r->req.cmd.xfer / s->qdev.blocksize;
1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125

        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
                r->req.cmd.lba, len);

        if (r->req.cmd.lba > s->max_lba) {
            goto illegal_lba;
        }

        /*
         * We only support WRITE SAME with the unmap bit set for now.
         */
        if (!(buf[1] & 0x8)) {
            goto fail;
        }

        rc = bdrv_discard(s->bs, r->req.cmd.lba * s->cluster_size,
                          len * s->cluster_size);
        if (rc < 0) {
            /* XXX: better error code ?*/
            goto fail;
        }

1126
        break;
1127 1128
    case REQUEST_SENSE:
        abort();
P
pbrook 已提交
1129
    default:
1130
        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1131
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1132
        return 0;
P
pbrook 已提交
1133
    fail:
1134
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1135
        return 0;
1136
    illegal_lba:
1137
        scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1138
        return 0;
P
pbrook 已提交
1139
    }
1140
    if (r->sector_count == 0 && r->iov.iov_len == 0) {
1141
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
1142
    }
1143
    len = r->sector_count * 512 + r->iov.iov_len;
1144 1145
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        return -len;
P
pbrook 已提交
1146 1147 1148
    } else {
        if (!r->sector_count)
            r->sector_count = -1;
1149
        return len;
P
pbrook 已提交
1150 1151 1152
    }
}

J
Jan Kiszka 已提交
1153 1154 1155 1156 1157
static void scsi_disk_reset(DeviceState *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
    uint64_t nb_sectors;

1158
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
J
Jan Kiszka 已提交
1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171

    bdrv_get_geometry(s->bs, &nb_sectors);
    nb_sectors /= s->cluster_size;
    if (nb_sectors) {
        nb_sectors--;
    }
    s->max_lba = nb_sectors;
}

static void scsi_destroy(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);

1172
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1173
    blockdev_mark_auto_del(s->qdev.conf.bs);
G
Gerd Hoffmann 已提交
1174 1175
}

1176 1177 1178 1179
static void scsi_cd_change_media_cb(void *opaque)
{
}

1180 1181 1182 1183 1184
static bool scsi_cd_is_tray_open(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_open;
}

1185 1186 1187 1188 1189 1190
static bool scsi_cd_is_medium_locked(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_locked;
}

static const BlockDevOps scsi_cd_block_ops = {
1191
    .change_media_cb = scsi_cd_change_media_cb,
1192
    .is_tray_open = scsi_cd_is_tray_open,
1193 1194 1195
    .is_medium_locked = scsi_cd_is_medium_locked,
};

H
Hannes Reinecke 已提交
1196
static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
P
pbrook 已提交
1197
{
1198
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1199
    DriveInfo *dinfo;
P
pbrook 已提交
1200

1201
    if (!s->qdev.conf.bs) {
1202
        error_report("scsi-disk: drive property not set");
1203 1204
        return -1;
    }
1205
    s->bs = s->qdev.conf.bs;
1206

H
Hannes Reinecke 已提交
1207
    if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->bs)) {
1208 1209 1210 1211
        error_report("Device needs media, but drive is empty");
        return -1;
    }

1212
    if (!s->serial) {
1213 1214
        /* try to fall back to value set with legacy -drive serial=... */
        dinfo = drive_get_by_blockdev(s->bs);
1215
        if (*dinfo->serial) {
1216
            s->serial = g_strdup(dinfo->serial);
1217
        }
1218 1219
    }

1220
    if (!s->version) {
1221
        s->version = g_strdup(QEMU_VERSION);
1222 1223
    }

1224
    if (bdrv_is_sg(s->bs)) {
1225
        error_report("scsi-disk: unwanted /dev/sg*");
1226 1227 1228
        return -1;
    }

H
Hannes Reinecke 已提交
1229
    if (scsi_type == TYPE_ROM) {
1230
        bdrv_set_dev_ops(s->bs, &scsi_cd_block_ops, s);
1231
        s->qdev.blocksize = 2048;
H
Hannes Reinecke 已提交
1232
    } else if (scsi_type == TYPE_DISK) {
1233
        s->qdev.blocksize = s->qdev.conf.logical_block_size;
H
Hannes Reinecke 已提交
1234 1235 1236
    } else {
        error_report("scsi-disk: Unhandled SCSI type %02x", scsi_type);
        return -1;
P
pbrook 已提交
1237
    }
1238
    s->cluster_size = s->qdev.blocksize / 512;
1239
    bdrv_set_buffer_alignment(s->bs, s->qdev.blocksize);
1240

H
Hannes Reinecke 已提交
1241
    s->qdev.type = scsi_type;
1242
    qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
1243
    add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
1244 1245 1246
    return 0;
}

1247 1248
static int scsi_hd_initfn(SCSIDevice *dev)
{
H
Hannes Reinecke 已提交
1249
    return scsi_initfn(dev, TYPE_DISK);
1250 1251 1252 1253
}

static int scsi_cd_initfn(SCSIDevice *dev)
{
H
Hannes Reinecke 已提交
1254
    return scsi_initfn(dev, TYPE_ROM);
1255 1256 1257 1258
}

static int scsi_disk_initfn(SCSIDevice *dev)
{
1259
    DriveInfo *dinfo;
H
Hannes Reinecke 已提交
1260
    uint8_t scsi_type;
1261 1262

    if (!dev->conf.bs) {
H
Hannes Reinecke 已提交
1263
        scsi_type = TYPE_DISK;  /* will die in scsi_initfn() */
1264
    } else {
1265
        dinfo = drive_get_by_blockdev(dev->conf.bs);
H
Hannes Reinecke 已提交
1266
        scsi_type = dinfo->media_cd ? TYPE_ROM : TYPE_DISK;
1267 1268
    }

H
Hannes Reinecke 已提交
1269
    return scsi_initfn(dev, scsi_type);
1270 1271
}

P
Paolo Bonzini 已提交
1272 1273
static SCSIReqOps scsi_disk_reqops = {
    .size         = sizeof(SCSIDiskReq),
1274 1275 1276 1277 1278 1279
    .free_req     = scsi_free_request,
    .send_command = scsi_send_command,
    .read_data    = scsi_read_data,
    .write_data   = scsi_write_data,
    .cancel_io    = scsi_cancel_io,
    .get_buf      = scsi_get_buf,
P
Paolo Bonzini 已提交
1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294
};

static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag,
                                     uint32_t lun, void *hba_private)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
    SCSIRequest *req;
    SCSIDiskReq *r;

    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
    r = DO_UPCAST(SCSIDiskReq, req, req);
    r->iov.iov_base = qemu_blockalign(s->bs, SCSI_DMA_BUF_SIZE);
    return req;
}

1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308
#define DEFINE_SCSI_DISK_PROPERTIES()                           \
    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)

static SCSIDeviceInfo scsi_disk_info[] = {
    {
        .qdev.name    = "scsi-hd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_hd_initfn,
        .destroy      = scsi_destroy,
1309
        .alloc_req    = scsi_new_request,
1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    },{
        .qdev.name    = "scsi-cd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI CD-ROM",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_cd_initfn,
        .destroy      = scsi_destroy,
1323
        .alloc_req    = scsi_new_request,
1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
    },{
        .qdev.name    = "scsi-disk", /* legacy -device scsi-disk */
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk or CD-ROM (legacy)",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_disk_initfn,
        .destroy      = scsi_destroy,
1336
        .alloc_req    = scsi_new_request,
1337 1338 1339 1340 1341 1342
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    }
1343 1344 1345 1346
};

static void scsi_disk_register_devices(void)
{
1347 1348 1349 1350 1351
    int i;

    for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
        scsi_qdev_register(&scsi_disk_info[i]);
    }
T
ths 已提交
1352
}
1353
device_init(scsi_disk_register_devices)