scsi-disk.c 49.6 KB
Newer Older
P
pbrook 已提交
1 2 3 4 5 6 7
/*
 * SCSI Device emulation
 *
 * Copyright (c) 2006 CodeSourcery.
 * Based on code by Fabrice Bellard
 *
 * Written by Paul Brook
8 9 10 11 12 13
 * Modifications:
 *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 *                                 when the allocation length of CDB is smaller
 *                                 than 36.
 *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 *                                 MODE SENSE response.
P
pbrook 已提交
14
 *
M
Matthew Fernandez 已提交
15
 * This code is licensed under the LGPL.
P
pbrook 已提交
16 17
 *
 * Note that this file only handles the SCSI architecture model and device
18 19
 * commands.  Emulation of interface/link layer protocols is handled by
 * the host adapter emulator.
P
pbrook 已提交
20 21 22 23 24
 */

//#define DEBUG_SCSI

#ifdef DEBUG_SCSI
25 26
#define DPRINTF(fmt, ...) \
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
27
#else
28
#define DPRINTF(fmt, ...) do {} while(0)
P
pbrook 已提交
29 30
#endif

31 32
#define BADF(fmt, ...) \
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
33

P
pbrook 已提交
34
#include "qemu-common.h"
35
#include "qemu-error.h"
G
Gerd Hoffmann 已提交
36
#include "scsi.h"
G
Gerd Hoffmann 已提交
37
#include "scsi-defs.h"
38
#include "sysemu.h"
B
Blue Swirl 已提交
39
#include "blockdev.h"
40
#include "block_int.h"
41

42
#define SCSI_DMA_BUF_SIZE    131072
43
#define SCSI_MAX_INQUIRY_LEN 256
P
pbrook 已提交
44

K
Kevin Wolf 已提交
45 46 47 48
#define SCSI_REQ_STATUS_RETRY           0x01
#define SCSI_REQ_STATUS_RETRY_TYPE_MASK 0x06
#define SCSI_REQ_STATUS_RETRY_READ      0x00
#define SCSI_REQ_STATUS_RETRY_WRITE     0x02
49
#define SCSI_REQ_STATUS_RETRY_FLUSH     0x04
50

51 52
typedef struct SCSIDiskState SCSIDiskState;

53 54
typedef struct SCSIDiskReq {
    SCSIRequest req;
P
pbrook 已提交
55
    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
56 57
    uint64_t sector;
    uint32_t sector_count;
58
    uint32_t buflen;
59 60
    struct iovec iov;
    QEMUIOVector qiov;
61
    uint32_t status;
62
    BlockAcctCookie acct;
63
} SCSIDiskReq;
P
pbrook 已提交
64

65
struct SCSIDiskState
P
pbrook 已提交
66
{
67
    SCSIDevice qdev;
68
    BlockDriverState *bs;
P
pbrook 已提交
69 70 71
    /* The qemu block layer uses a fixed 512 byte sector size.
       This is the number of 512 byte blocks in a single scsi sector.  */
    int cluster_size;
72
    uint32_t removable;
73
    uint64_t max_lba;
74
    bool media_changed;
75
    bool media_event;
76
    QEMUBH *bh;
G
Gerd Hoffmann 已提交
77
    char *version;
78
    char *serial;
79
    bool tray_open;
80
    bool tray_locked;
P
pbrook 已提交
81 82
};

K
Kevin Wolf 已提交
83
static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
84
static int scsi_disk_emulate_command(SCSIDiskReq *r);
K
Kevin Wolf 已提交
85

P
Paolo Bonzini 已提交
86
static void scsi_free_request(SCSIRequest *req)
P
pbrook 已提交
87
{
P
Paolo Bonzini 已提交
88 89
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

90 91 92
    if (r->iov.iov_base) {
        qemu_vfree(r->iov.iov_base);
    }
P
pbrook 已提交
93 94
}

95 96
/* Helper function for command completion with sense.  */
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
G
Gerd Hoffmann 已提交
97
{
B
Blue Swirl 已提交
98 99
    DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
            r->req.tag, sense.key, sense.asc, sense.ascq);
100 101
    scsi_req_build_sense(&r->req, sense);
    scsi_req_complete(&r->req, CHECK_CONDITION);
P
pbrook 已提交
102 103 104
}

/* Cancel a pending data transfer.  */
105
static void scsi_cancel_io(SCSIRequest *req)
P
pbrook 已提交
106
{
107 108 109 110 111
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    DPRINTF("Cancel tag=0x%x\n", req->tag);
    if (r->req.aiocb) {
        bdrv_aio_cancel(r->req.aiocb);
P
pbrook 已提交
112
    }
113
    r->req.aiocb = NULL;
P
pbrook 已提交
114 115
}

116 117
static uint32_t scsi_init_iovec(SCSIDiskReq *r)
{
118 119 120 121 122 123 124
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (!r->iov.iov_base) {
        r->buflen = SCSI_DMA_BUF_SIZE;
        r->iov.iov_base = qemu_blockalign(s->bs, r->buflen);
    }
    r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
125 126 127 128
    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
    return r->qiov.size / 512;
}

P
pbrook 已提交
129 130
static void scsi_read_complete(void * opaque, int ret)
{
131
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
132
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
133
    int n;
P
pbrook 已提交
134

P
Paolo Bonzini 已提交
135 136 137 138
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }
139

P
pbrook 已提交
140
    if (ret) {
K
Kevin Wolf 已提交
141 142 143
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_READ)) {
            return;
        }
P
pbrook 已提交
144
    }
K
Kevin Wolf 已提交
145

146
    DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
P
pbrook 已提交
147

148
    n = r->qiov.size / 512;
K
Kevin Wolf 已提交
149 150
    r->sector += n;
    r->sector_count -= n;
151
    scsi_req_data(&r->req, r->qiov.size);
P
pbrook 已提交
152 153
}

154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
static void scsi_flush_complete(void * opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }

    if (ret < 0) {
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_FLUSH)) {
            return;
        }
    }

    scsi_req_complete(&r->req, GOOD);
}
K
Kevin Wolf 已提交
172

173 174
/* Read more data from scsi device into buffer.  */
static void scsi_read_data(SCSIRequest *req)
P
pbrook 已提交
175
{
176
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
K
Kevin Wolf 已提交
177
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
178 179
    uint32_t n;

P
pbrook 已提交
180
    if (r->sector_count == (uint32_t)-1) {
181
        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
P
pbrook 已提交
182
        r->sector_count = 0;
P
Paolo Bonzini 已提交
183
        scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
184
        return;
P
pbrook 已提交
185
    }
P
pbrook 已提交
186 187
    DPRINTF("Read sector_count=%d\n", r->sector_count);
    if (r->sector_count == 0) {
188 189
        /* This also clears the sense buffer for REQUEST SENSE.  */
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
190
        return;
P
pbrook 已提交
191 192
    }

193 194 195
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

196 197 198 199 200 201
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_read_complete(r, -EINVAL);
        return;
    }

202 203 204
    if (s->tray_open) {
        scsi_read_complete(r, -ENOMEDIUM);
    }
205
    n = scsi_init_iovec(r);
206
    bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
207
    r->req.aiocb = bdrv_aio_readv(s->bs, r->sector, &r->qiov, n,
208
                              scsi_read_complete, r);
209 210 211
    if (r->req.aiocb == NULL) {
        scsi_read_complete(r, -EIO);
    }
P
pbrook 已提交
212 213
}

K
Kevin Wolf 已提交
214 215 216
static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
{
    int is_read = (type == SCSI_REQ_STATUS_RETRY_READ);
217
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
218
    BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
219

220
    if (action == BLOCK_ERR_IGNORE) {
K
Kevin Wolf 已提交
221
        bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
222
        return 0;
223
    }
224 225 226

    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
            || action == BLOCK_ERR_STOP_ANY) {
K
Kevin Wolf 已提交
227 228 229 230 231

        type &= SCSI_REQ_STATUS_RETRY_TYPE_MASK;
        r->status |= SCSI_REQ_STATUS_RETRY | type;

        bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
232
        vm_stop(RUN_STATE_IO_ERROR);
L
Luiz Capitulino 已提交
233
        bdrv_iostatus_set_err(s->bs, error);
234
    } else {
235
        switch (error) {
236 237 238
        case ENOMEDIUM:
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            break;
239
        case ENOMEM:
240
            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
241 242
            break;
        case EINVAL:
243
            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
244 245
            break;
        default:
246
            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
247
            break;
248
        }
K
Kevin Wolf 已提交
249
        bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
250 251 252 253
    }
    return 1;
}

P
pbrook 已提交
254 255
static void scsi_write_complete(void * opaque, int ret)
{
256
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
257
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
258 259
    uint32_t n;

P
Paolo Bonzini 已提交
260 261 262 263
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
        bdrv_acct_done(s->bs, &r->acct);
    }
264

P
pbrook 已提交
265
    if (ret) {
K
Kevin Wolf 已提交
266
        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_WRITE)) {
267
            return;
K
Kevin Wolf 已提交
268
        }
P
pbrook 已提交
269 270
    }

271
    n = r->qiov.size / 512;
272 273
    r->sector += n;
    r->sector_count -= n;
P
pbrook 已提交
274
    if (r->sector_count == 0) {
275
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
276
    } else {
277 278 279
        scsi_init_iovec(r);
        DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, r->qiov.size);
        scsi_req_data(&r->req, r->qiov.size);
P
pbrook 已提交
280 281 282
    }
}

283
static void scsi_write_data(SCSIRequest *req)
284
{
285
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
286
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
287 288
    uint32_t n;

289 290 291
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

292 293 294
    if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_write_complete(r, -EINVAL);
295
        return;
296 297
    }

298
    n = r->qiov.size / 512;
299
    if (n) {
300 301 302
        if (s->tray_open) {
            scsi_write_complete(r, -ENOMEDIUM);
        }
303
        bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
304
        r->req.aiocb = bdrv_aio_writev(s->bs, r->sector, &r->qiov, n,
305
                                       scsi_write_complete, r);
306
        if (r->req.aiocb == NULL) {
307
            scsi_write_complete(r, -ENOMEM);
308
        }
309
    } else {
310
        /* Called for the first time.  Ask the driver to send us more data.  */
311 312
        scsi_write_complete(r, 0);
    }
P
pbrook 已提交
313
}
P
pbrook 已提交
314

315
static void scsi_dma_restart_bh(void *opaque)
316
{
317
    SCSIDiskState *s = opaque;
318 319
    SCSIRequest *req;
    SCSIDiskReq *r;
320 321 322

    qemu_bh_delete(s->bh);
    s->bh = NULL;
323

324 325
    QTAILQ_FOREACH(req, &s->qdev.requests, next) {
        r = DO_UPCAST(SCSIDiskReq, req, req);
326
        if (r->status & SCSI_REQ_STATUS_RETRY) {
K
Kevin Wolf 已提交
327
            int status = r->status;
328 329
            int ret;

K
Kevin Wolf 已提交
330 331 332 333 334
            r->status &=
                ~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);

            switch (status & SCSI_REQ_STATUS_RETRY_TYPE_MASK) {
            case SCSI_REQ_STATUS_RETRY_READ:
335
                scsi_read_data(&r->req);
K
Kevin Wolf 已提交
336 337
                break;
            case SCSI_REQ_STATUS_RETRY_WRITE:
338
                scsi_write_data(&r->req);
K
Kevin Wolf 已提交
339
                break;
340
            case SCSI_REQ_STATUS_RETRY_FLUSH:
341
                ret = scsi_disk_emulate_command(r);
342
                if (ret == 0) {
343
                    scsi_req_complete(&r->req, GOOD);
344
                }
K
Kevin Wolf 已提交
345
            }
346 347 348 349
        }
    }
}

350
static void scsi_dma_restart_cb(void *opaque, int running, RunState state)
351
{
352
    SCSIDiskState *s = opaque;
353

354
    if (!running) {
355
        return;
356
    }
357 358 359 360 361 362
    if (!s->bh) {
        s->bh = qemu_bh_new(scsi_dma_restart_bh, s);
        qemu_bh_schedule(s->bh);
    }
}

P
pbrook 已提交
363
/* Return a pointer to the data buffer.  */
364
static uint8_t *scsi_get_buf(SCSIRequest *req)
P
pbrook 已提交
365
{
366
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
P
pbrook 已提交
367

368
    return (uint8_t *)r->iov.iov_base;
P
pbrook 已提交
369 370
}

371 372
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
{
G
Gerd Hoffmann 已提交
373
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390
    int buflen = 0;

    if (req->cmd.buf[1] & 0x2) {
        /* Command support data - optional, not implemented */
        BADF("optional INQUIRY command support request not implemented\n");
        return -1;
    }

    if (req->cmd.buf[1] & 0x1) {
        /* Vital product data */
        uint8_t page_code = req->cmd.buf[2];
        if (req->cmd.xfer < 4) {
            BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
                 "less than 4\n", page_code, req->cmd.xfer);
            return -1;
        }

H
Hannes Reinecke 已提交
391
        if (s->qdev.type == TYPE_ROM) {
392 393 394 395 396 397 398 399 400
            outbuf[buflen++] = 5;
        } else {
            outbuf[buflen++] = 0;
        }
        outbuf[buflen++] = page_code ; // this page
        outbuf[buflen++] = 0x00;

        switch (page_code) {
        case 0x00: /* Supported page codes, mandatory */
H
Hannes Reinecke 已提交
401 402
        {
            int pages;
403 404
            DPRINTF("Inquiry EVPD[Supported pages] "
                    "buffer size %zd\n", req->cmd.xfer);
H
Hannes Reinecke 已提交
405
            pages = buflen++;
406
            outbuf[buflen++] = 0x00; // list of supported pages (this page)
407
            if (s->serial) {
408
                outbuf[buflen++] = 0x80; // unit serial number
409
            }
410
            outbuf[buflen++] = 0x83; // device identification
H
Hannes Reinecke 已提交
411
            if (s->qdev.type == TYPE_DISK) {
412 413
                outbuf[buflen++] = 0xb0; // block limits
                outbuf[buflen++] = 0xb2; // thin provisioning
H
Hannes Reinecke 已提交
414 415
            }
            outbuf[pages] = buflen - pages - 1; // number of pages
416
            break;
H
Hannes Reinecke 已提交
417
        }
418 419
        case 0x80: /* Device serial number, optional */
        {
420
            int l;
421

422 423 424 425 426 427
            if (!s->serial) {
                DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
                return -1;
            }

            l = strlen(s->serial);
428
            if (l > req->cmd.xfer) {
429
                l = req->cmd.xfer;
430 431
            }
            if (l > 20) {
432
                l = 20;
433
            }
434 435 436 437

            DPRINTF("Inquiry EVPD[Serial number] "
                    "buffer size %zd\n", req->cmd.xfer);
            outbuf[buflen++] = l;
438
            memcpy(outbuf+buflen, s->serial, l);
439 440 441 442 443 444 445
            buflen += l;
            break;
        }

        case 0x83: /* Device identification page, mandatory */
        {
            int max_len = 255 - 8;
446
            int id_len = strlen(bdrv_get_device_name(s->bs));
447

448
            if (id_len > max_len) {
449
                id_len = max_len;
450
            }
451 452 453
            DPRINTF("Inquiry EVPD[Device identification] "
                    "buffer size %zd\n", req->cmd.xfer);

H
Hannes Reinecke 已提交
454
            outbuf[buflen++] = 4 + id_len;
455 456 457 458 459
            outbuf[buflen++] = 0x2; // ASCII
            outbuf[buflen++] = 0;   // not officially assigned
            outbuf[buflen++] = 0;   // reserved
            outbuf[buflen++] = id_len; // length of data following

460
            memcpy(outbuf+buflen, bdrv_get_device_name(s->bs), id_len);
461 462 463
            buflen += id_len;
            break;
        }
464
        case 0xb0: /* block limits */
C
Christoph Hellwig 已提交
465
        {
466 467
            unsigned int unmap_sectors =
                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
468 469 470 471
            unsigned int min_io_size =
                    s->qdev.conf.min_io_size / s->qdev.blocksize;
            unsigned int opt_io_size =
                    s->qdev.conf.opt_io_size / s->qdev.blocksize;
C
Christoph Hellwig 已提交
472

H
Hannes Reinecke 已提交
473
            if (s->qdev.type == TYPE_ROM) {
H
Hannes Reinecke 已提交
474 475 476 477
                DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                        page_code);
                return -1;
            }
C
Christoph Hellwig 已提交
478 479 480 481 482 483 484 485 486 487 488 489 490 491
            /* required VPD size with unmap support */
            outbuf[3] = buflen = 0x3c;

            memset(outbuf + 4, 0, buflen - 4);

            /* optimal transfer length granularity */
            outbuf[6] = (min_io_size >> 8) & 0xff;
            outbuf[7] = min_io_size & 0xff;

            /* optimal transfer length */
            outbuf[12] = (opt_io_size >> 24) & 0xff;
            outbuf[13] = (opt_io_size >> 16) & 0xff;
            outbuf[14] = (opt_io_size >> 8) & 0xff;
            outbuf[15] = opt_io_size & 0xff;
492 493 494 495 496 497 498 499 500 501 502 503 504 505 506

            /* optimal unmap granularity */
            outbuf[28] = (unmap_sectors >> 24) & 0xff;
            outbuf[29] = (unmap_sectors >> 16) & 0xff;
            outbuf[30] = (unmap_sectors >> 8) & 0xff;
            outbuf[31] = unmap_sectors & 0xff;
            break;
        }
        case 0xb2: /* thin provisioning */
        {
            outbuf[3] = buflen = 8;
            outbuf[4] = 0;
            outbuf[5] = 0x40; /* write same with unmap supported */
            outbuf[6] = 0;
            outbuf[7] = 0;
C
Christoph Hellwig 已提交
507 508
            break;
        }
509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532
        default:
            BADF("Error: unsupported Inquiry (EVPD[%02X]) "
                 "buffer size %zd\n", page_code, req->cmd.xfer);
            return -1;
        }
        /* done with EVPD */
        return buflen;
    }

    /* Standard INQUIRY data */
    if (req->cmd.buf[2] != 0) {
        BADF("Error: Inquiry (STANDARD) page or code "
             "is non-zero [%02X]\n", req->cmd.buf[2]);
        return -1;
    }

    /* PAGE CODE == 0 */
    if (req->cmd.xfer < 5) {
        BADF("Error: Inquiry (STANDARD) buffer size %zd "
             "is less than 5\n", req->cmd.xfer);
        return -1;
    }

    buflen = req->cmd.xfer;
533
    if (buflen > SCSI_MAX_INQUIRY_LEN) {
534
        buflen = SCSI_MAX_INQUIRY_LEN;
535
    }
536 537
    memset(outbuf, 0, buflen);

H
Hannes Reinecke 已提交
538 539
    outbuf[0] = s->qdev.type & 0x1f;
    if (s->qdev.type == TYPE_ROM) {
540
        outbuf[1] = 0x80;
L
Laszlo Ast 已提交
541
        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
542
    } else {
543
        outbuf[1] = s->removable ? 0x80 : 0;
L
Laszlo Ast 已提交
544
        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
545
    }
L
Laszlo Ast 已提交
546
    memcpy(&outbuf[8], "QEMU    ", 8);
G
Gerd Hoffmann 已提交
547
    memset(&outbuf[32], 0, 4);
548
    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
549 550 551 552 553 554
    /*
     * We claim conformance to SPC-3, which is required for guests
     * to ask for modern features like READ CAPACITY(16) or the
     * block characteristics VPD page by default.  Not all of SPC-3
     * is actually implemented, but we're good enough.
     */
C
Christoph Hellwig 已提交
555
    outbuf[2] = 5;
556
    outbuf[3] = 2; /* Format 2 */
557 558 559 560 561 562 563 564 565

    if (buflen > 36) {
        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
    } else {
        /* If the allocation length of CDB is too small,
               the additional length is not adjusted */
        outbuf[4] = 36 - 5;
    }

566
    /* Sync data transfer and TCQ.  */
567
    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
568 569 570
    return buflen;
}

571 572 573 574 575 576 577 578 579 580 581 582 583
static inline bool media_is_dvd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
    if (!bdrv_is_inserted(s->bs)) {
        return false;
    }
    bdrv_get_geometry(s->bs, &nb_sectors);
    return nb_sectors > CD_MAX_SECTORS;
}

584 585 586 587 588 589 590 591 592 593 594 595 596
static inline bool media_is_cd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
    if (!bdrv_is_inserted(s->bs)) {
        return false;
    }
    bdrv_get_geometry(s->bs, &nb_sectors);
    return nb_sectors <= CD_MAX_SECTORS;
}

597 598 599
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
                                   uint8_t *outbuf)
{
600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687
    static const int rds_caps_size[5] = {
        [0] = 2048 + 4,
        [1] = 4 + 4,
        [3] = 188 + 4,
        [4] = 2048 + 4,
    };

    uint8_t media = r->req.cmd.buf[1];
    uint8_t layer = r->req.cmd.buf[6];
    uint8_t format = r->req.cmd.buf[7];
    int size = -1;

    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if (media != 0) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
        return -1;
    }

    if (format != 0xff) {
        if (s->tray_open || !bdrv_is_inserted(s->bs)) {
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            return -1;
        }
        if (media_is_cd(s)) {
            scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
            return -1;
        }
        if (format >= ARRAY_SIZE(rds_caps_size)) {
            return -1;
        }
        size = rds_caps_size[format];
        memset(outbuf, 0, size);
    }

    switch (format) {
    case 0x00: {
        /* Physical format information */
        uint64_t nb_sectors;
        if (layer != 0) {
            goto fail;
        }
        bdrv_get_geometry(s->bs, &nb_sectors);

        outbuf[4] = 1;   /* DVD-ROM, part version 1 */
        outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
        outbuf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
        outbuf[7] = 0;   /* default densities */

        stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
        stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
        break;
    }

    case 0x01: /* DVD copyright information, all zeros */
        break;

    case 0x03: /* BCA information - invalid field for no BCA info */
        return -1;

    case 0x04: /* DVD disc manufacturing information, all zeros */
        break;

    case 0xff: { /* List capabilities */
        int i;
        size = 4;
        for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
            if (!rds_caps_size[i]) {
                continue;
            }
            outbuf[size] = i;
            outbuf[size + 1] = 0x40; /* Not writable, readable */
            stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
            size += 4;
        }
        break;
     }

    default:
        return -1;
    }

    /* Size of buffer, not including 2 byte size field */
    stw_be_p(outbuf, size - 2);
    return size;

fail:
688 689 690
    return -1;
}

691
static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
692
{
693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742
    uint8_t event_code, media_status;

    media_status = 0;
    if (s->tray_open) {
        media_status = MS_TRAY_OPEN;
    } else if (bdrv_is_inserted(s->bs)) {
        media_status = MS_MEDIA_PRESENT;
    }

    /* Event notification descriptor */
    event_code = MEC_NO_CHANGE;
    if (media_status != MS_TRAY_OPEN && s->media_event) {
        event_code = MEC_NEW_MEDIA;
        s->media_event = false;
    }

    outbuf[0] = event_code;
    outbuf[1] = media_status;

    /* These fields are reserved, just clear them. */
    outbuf[2] = 0;
    outbuf[3] = 0;
    return 4;
}

static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
                                              uint8_t *outbuf)
{
    int size;
    uint8_t *buf = r->req.cmd.buf;
    uint8_t notification_class_request = buf[4];
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if ((buf[1] & 1) == 0) {
        /* asynchronous */
        return -1;
    }

    size = 4;
    outbuf[0] = outbuf[1] = 0;
    outbuf[3] = 1 << GESN_MEDIA; /* supported events */
    if (notification_class_request & (1 << GESN_MEDIA)) {
        outbuf[2] = GESN_MEDIA;
        size += scsi_event_status_media(s, &outbuf[size]);
    } else {
        outbuf[2] = 0x80;
    }
    stw_be_p(outbuf, size - 4);
    return size;
743 744
}

745
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
746
{
747 748
    int current;

749 750 751
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776
    current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
    memset(outbuf, 0, 40);
    stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
    stw_be_p(&outbuf[6], current);
    /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
    outbuf[10] = 0x03; /* persistent, current */
    outbuf[11] = 8; /* two profiles */
    stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
    outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
    stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
    outbuf[18] = (current == MMC_PROFILE_CD_ROM);
    /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
    stw_be_p(&outbuf[20], 1);
    outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[23] = 8;
    stl_be_p(&outbuf[24], 1); /* SCSI */
    outbuf[28] = 1; /* DBE = 1, mandatory */
    /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
    stw_be_p(&outbuf[32], 3);
    outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[35] = 4;
    outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
    /* TODO: Random readable, CD read, DVD read, drive serial number,
       power management */
    return 40;
777 778 779 780 781 782 783 784 785 786 787 788
}

static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
{
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    memset(outbuf, 0, 8);
    outbuf[5] = 1; /* CD-ROM */
    return 8;
}

789
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
790
                           int page_control)
791
{
792 793 794 795
    static const int mode_sense_valid[0x3f] = {
        [MODE_PAGE_HD_GEOMETRY]            = (1 << TYPE_DISK),
        [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
        [MODE_PAGE_CACHING]                = (1 << TYPE_DISK) | (1 << TYPE_ROM),
796 797
        [MODE_PAGE_R_W_ERROR]              = (1 << TYPE_DISK) | (1 << TYPE_ROM),
        [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
798 799 800
        [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
    };

801
    BlockDriverState *bdrv = s->bs;
802
    int cylinders, heads, secs;
803
    uint8_t *p = *p_outbuf;
804

805 806 807 808 809 810
    if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
        return -1;
    }

    p[0] = page;

811 812 813 814 815 816
    /*
     * If Changeable Values are requested, a mask denoting those mode parameters
     * that are changeable shall be returned. As we currently don't support
     * parameter changes via MODE_SELECT all bits are returned set to zero.
     * The buffer was already menset to zero by the caller of this function.
     */
817
    switch (page) {
818
    case MODE_PAGE_HD_GEOMETRY:
819
        p[1] = 0x16;
820
        if (page_control == 1) { /* Changeable Values */
821
            break;
822
        }
823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846
        /* if a geometry hint is available, use it */
        bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
        p[2] = (cylinders >> 16) & 0xff;
        p[3] = (cylinders >> 8) & 0xff;
        p[4] = cylinders & 0xff;
        p[5] = heads & 0xff;
        /* Write precomp start cylinder, disabled */
        p[6] = (cylinders >> 16) & 0xff;
        p[7] = (cylinders >> 8) & 0xff;
        p[8] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[9] = (cylinders >> 16) & 0xff;
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Device step rate [ns], 200ns */
        p[12] = 0;
        p[13] = 200;
        /* Landing zone cylinder */
        p[14] = 0xff;
        p[15] =  0xff;
        p[16] = 0xff;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[20] = (5400 >> 8) & 0xff;
        p[21] = 5400 & 0xff;
847
        break;
848

849
    case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
850
        p[1] = 0x1e;
851
        if (page_control == 1) { /* Changeable Values */
852
            break;
853
        }
854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884
        /* Transfer rate [kbit/s], 5Mbit/s */
        p[2] = 5000 >> 8;
        p[3] = 5000 & 0xff;
        /* if a geometry hint is available, use it */
        bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
        p[4] = heads & 0xff;
        p[5] = secs & 0xff;
        p[6] = s->cluster_size * 2;
        p[8] = (cylinders >> 8) & 0xff;
        p[9] = cylinders & 0xff;
        /* Write precomp start cylinder, disabled */
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[12] = (cylinders >> 8) & 0xff;
        p[13] = cylinders & 0xff;
        /* Device step rate [100us], 100us */
        p[14] = 0;
        p[15] = 1;
        /* Device step pulse width [us], 1us */
        p[16] = 1;
        /* Device head settle delay [100us], 100us */
        p[17] = 0;
        p[18] = 1;
        /* Motor on delay [0.1s], 0.1s */
        p[19] = 1;
        /* Motor off delay [0.1s], 0.1s */
        p[20] = 1;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[28] = (5400 >> 8) & 0xff;
        p[29] = 5400 & 0xff;
885
        break;
886

887
    case MODE_PAGE_CACHING:
888 889
        p[0] = 8;
        p[1] = 0x12;
890
        if (page_control == 1) { /* Changeable Values */
891
            break;
892
        }
893
        if (bdrv_enable_write_cache(s->bs)) {
894 895
            p[2] = 4; /* WCE */
        }
896
        break;
897

898 899 900 901 902 903 904 905 906 907 908 909
    case MODE_PAGE_R_W_ERROR:
        p[1] = 10;
        p[2] = 0x80; /* Automatic Write Reallocation Enabled */
        if (s->qdev.type == TYPE_ROM) {
            p[3] = 0x20; /* Read Retry Count */
        }
        break;

    case MODE_PAGE_AUDIO_CTL:
        p[1] = 14;
        break;

910
    case MODE_PAGE_CAPABILITIES:
911
        p[1] = 0x14;
912
        if (page_control == 1) { /* Changeable Values */
913
            break;
914
        }
915 916 917

        p[2] = 0x3b; /* CD-R & CD-RW read */
        p[3] = 0; /* Writing not supported */
918 919 920 921 922
        p[4] = 0x7f; /* Audio, composite, digital out,
                        mode 2 form 1&2, multi session */
        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
                        RW corrected, C2 errors, ISRC,
                        UPC, Bar code */
923
        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
924 925 926
        /* Locking supported, jumper present, eject, tray */
        p[7] = 0; /* no volume & mute control, no
                     changer */
927
        p[8] = (50 * 176) >> 8; /* 50x read speed */
928
        p[9] = (50 * 176) & 0xff;
929 930 931
        p[10] = 2 >> 8; /* Two volume levels */
        p[11] = 2 & 0xff;
        p[12] = 2048 >> 8; /* 2M buffer */
932
        p[13] = 2048 & 0xff;
933
        p[14] = (16 * 176) >> 8; /* 16x read speed current */
934
        p[15] = (16 * 176) & 0xff;
935
        p[18] = (16 * 176) >> 8; /* 16x write speed */
936
        p[19] = (16 * 176) & 0xff;
937
        p[20] = (16 * 176) >> 8; /* 16x write speed current */
938
        p[21] = (16 * 176) & 0xff;
939
        break;
940 941

    default:
942
        return -1;
943
    }
944 945 946

    *p_outbuf += p[1] + 2;
    return p[1] + 2;
947 948
}

949
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
950
{
951
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
952
    uint64_t nb_sectors;
953
    int page, dbd, buflen, ret, page_control;
954
    uint8_t *p;
955
    uint8_t dev_specific_param;
956

957 958 959
    dbd = r->req.cmd.buf[1]  & 0x8;
    page = r->req.cmd.buf[2] & 0x3f;
    page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
960
    DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
961 962
        (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
    memset(outbuf, 0, r->req.cmd.xfer);
963 964
    p = outbuf;

965
    if (bdrv_is_read_only(s->bs)) {
966 967 968 969 970
        dev_specific_param = 0x80; /* Readonly.  */
    } else {
        dev_specific_param = 0x00;
    }

971
    if (r->req.cmd.buf[0] == MODE_SENSE) {
972 973 974 975 976 977 978 979 980
        p[1] = 0; /* Default media type.  */
        p[2] = dev_specific_param;
        p[3] = 0; /* Block descriptor length.  */
        p += 4;
    } else { /* MODE_SENSE_10 */
        p[2] = 0; /* Default media type.  */
        p[3] = dev_specific_param;
        p[6] = p[7] = 0; /* Block descriptor length.  */
        p += 8;
981 982
    }

983
    bdrv_get_geometry(s->bs, &nb_sectors);
984
    if (!dbd && nb_sectors) {
985
        if (r->req.cmd.buf[0] == MODE_SENSE) {
986 987 988 989
            outbuf[3] = 8; /* Block descriptor length  */
        } else { /* MODE_SENSE_10 */
            outbuf[7] = 8; /* Block descriptor length  */
        }
990
        nb_sectors /= s->cluster_size;
991
        if (nb_sectors > 0xffffff) {
992
            nb_sectors = 0;
993
        }
994 995 996 997 998 999 1000 1001 1002 1003 1004
        p[0] = 0; /* media density code */
        p[1] = (nb_sectors >> 16) & 0xff;
        p[2] = (nb_sectors >> 8) & 0xff;
        p[3] = nb_sectors & 0xff;
        p[4] = 0; /* reserved */
        p[5] = 0; /* bytes 5-7 are the sector size in bytes */
        p[6] = s->cluster_size * 2;
        p[7] = 0;
        p += 8;
    }

1005 1006 1007 1008
    if (page_control == 3) {
        /* Saved Values */
        scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
        return -1;
1009 1010
    }

1011 1012 1013 1014 1015 1016 1017 1018 1019
    if (page == 0x3f) {
        for (page = 0; page <= 0x3e; page++) {
            mode_sense_page(s, page, &p, page_control);
        }
    } else {
        ret = mode_sense_page(s, page, &p, page_control);
        if (ret == -1) {
            return -1;
        }
1020 1021 1022
    }

    buflen = p - outbuf;
1023 1024 1025 1026 1027
    /*
     * The mode data length field specifies the length in bytes of the
     * following data that is available to be transferred. The mode data
     * length does not include itself.
     */
1028
    if (r->req.cmd.buf[0] == MODE_SENSE) {
1029 1030 1031 1032 1033
        outbuf[0] = buflen - 1;
    } else { /* MODE_SENSE_10 */
        outbuf[0] = ((buflen - 2) >> 8) & 0xff;
        outbuf[1] = (buflen - 2) & 0xff;
    }
1034
    if (buflen > r->req.cmd.xfer) {
1035
        buflen = r->req.cmd.xfer;
1036
    }
1037 1038 1039
    return buflen;
}

1040 1041 1042 1043 1044 1045 1046 1047 1048
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    int start_track, format, msf, toclen;
    uint64_t nb_sectors;

    msf = req->cmd.buf[1] & 2;
    format = req->cmd.buf[2] & 0xf;
    start_track = req->cmd.buf[6];
1049
    bdrv_get_geometry(s->bs, &nb_sectors);
1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069
    DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
    nb_sectors /= s->cluster_size;
    switch (format) {
    case 0:
        toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
        break;
    case 1:
        /* multi session : only a single session defined */
        toclen = 12;
        memset(outbuf, 0, 12);
        outbuf[1] = 0x0a;
        outbuf[2] = 0x01;
        outbuf[3] = 0x01;
        break;
    case 2:
        toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
        break;
    default:
        return -1;
    }
1070
    if (toclen > req->cmd.xfer) {
1071
        toclen = req->cmd.xfer;
1072
    }
1073 1074 1075
    return toclen;
}

1076
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1077 1078 1079 1080 1081 1082 1083
{
    SCSIRequest *req = &r->req;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    bool start = req->cmd.buf[4] & 1;
    bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */

    if (s->qdev.type == TYPE_ROM && loej) {
1084 1085 1086 1087 1088 1089
        if (!start && !s->tray_open && s->tray_locked) {
            scsi_check_condition(r,
                                 bdrv_is_inserted(s->bs)
                                 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
                                 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
            return -1;
1090
        }
1091
        bdrv_eject(s->bs, !start);
1092
        s->tray_open = !start;
1093
    }
1094
    return 0;
1095 1096
}

1097
static int scsi_disk_emulate_command(SCSIDiskReq *r)
1098
{
1099
    SCSIRequest *req = &r->req;
1100 1101
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    uint64_t nb_sectors;
1102
    uint8_t *outbuf;
1103 1104
    int buflen = 0;

1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121
    if (!r->iov.iov_base) {
        /*
         * FIXME: we shouldn't return anything bigger than 4k, but the code
         * requires the buffer to be as big as req->cmd.xfer in several
         * places.  So, do not allow CDBs with a very large ALLOCATION
         * LENGTH.  The real fix would be to modify scsi_read_data and
         * dma_buf_read, so that they return data beyond the buflen
         * as all zeros.
         */
        if (req->cmd.xfer > 65536) {
            goto illegal_request;
        }
        r->buflen = MAX(4096, req->cmd.xfer);
        r->iov.iov_base = qemu_blockalign(s->bs, r->buflen);
    }

    outbuf = r->iov.iov_base;
1122 1123
    switch (req->cmd.buf[0]) {
    case TEST_UNIT_READY:
1124
        if (s->tray_open || !bdrv_is_inserted(s->bs)) {
1125
            goto not_ready;
1126
        }
H
Hannes Reinecke 已提交
1127
        break;
1128 1129
    case INQUIRY:
        buflen = scsi_disk_emulate_inquiry(req, outbuf);
1130
        if (buflen < 0) {
1131
            goto illegal_request;
1132
        }
H
Hannes Reinecke 已提交
1133
        break;
1134 1135
    case MODE_SENSE:
    case MODE_SENSE_10:
1136
        buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1137
        if (buflen < 0) {
1138
            goto illegal_request;
1139
        }
1140
        break;
1141 1142
    case READ_TOC:
        buflen = scsi_disk_emulate_read_toc(req, outbuf);
1143
        if (buflen < 0) {
1144
            goto illegal_request;
1145
        }
1146
        break;
1147
    case RESERVE:
1148
        if (req->cmd.buf[1] & 1) {
1149
            goto illegal_request;
1150
        }
1151 1152
        break;
    case RESERVE_10:
1153
        if (req->cmd.buf[1] & 3) {
1154
            goto illegal_request;
1155
        }
1156 1157
        break;
    case RELEASE:
1158
        if (req->cmd.buf[1] & 1) {
1159
            goto illegal_request;
1160
        }
1161 1162
        break;
    case RELEASE_10:
1163
        if (req->cmd.buf[1] & 3) {
1164
            goto illegal_request;
1165
        }
1166
        break;
1167
    case START_STOP:
1168 1169 1170
        if (scsi_disk_emulate_start_stop(r) < 0) {
            return -1;
        }
H
Hannes Reinecke 已提交
1171
        break;
1172
    case ALLOW_MEDIUM_REMOVAL:
1173
        s->tray_locked = req->cmd.buf[4] & 1;
1174
        bdrv_lock_medium(s->bs, req->cmd.buf[4] & 1);
H
Hannes Reinecke 已提交
1175
        break;
1176
    case READ_CAPACITY_10:
1177
        /* The normal LEN field for this command is zero.  */
H
Hannes Reinecke 已提交
1178 1179
        memset(outbuf, 0, 8);
        bdrv_get_geometry(s->bs, &nb_sectors);
1180
        if (!nb_sectors) {
1181
            goto not_ready;
1182
        }
1183 1184 1185 1186 1187 1188
        nb_sectors /= s->cluster_size;
        /* Returned value is the address of the last sector.  */
        nb_sectors--;
        /* Remember the new size for read/write sanity checking. */
        s->max_lba = nb_sectors;
        /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1189
        if (nb_sectors > UINT32_MAX) {
1190
            nb_sectors = UINT32_MAX;
1191
        }
1192 1193 1194 1195 1196 1197 1198 1199 1200
        outbuf[0] = (nb_sectors >> 24) & 0xff;
        outbuf[1] = (nb_sectors >> 16) & 0xff;
        outbuf[2] = (nb_sectors >> 8) & 0xff;
        outbuf[3] = nb_sectors & 0xff;
        outbuf[4] = 0;
        outbuf[5] = 0;
        outbuf[6] = s->cluster_size * 2;
        outbuf[7] = 0;
        buflen = 8;
H
Hannes Reinecke 已提交
1201
        break;
1202 1203 1204 1205 1206 1207
    case MECHANISM_STATUS:
        buflen = scsi_emulate_mechanism_status(s, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
1208
    case GET_CONFIGURATION:
1209
        buflen = scsi_get_configuration(s, outbuf);
1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case GET_EVENT_STATUS_NOTIFICATION:
        buflen = scsi_get_event_status_notification(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case READ_DVD_STRUCTURE:
        buflen = scsi_read_dvd_structure(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
1225
        break;
1226
    case SERVICE_ACTION_IN_16:
1227
        /* Service Action In subcommands. */
1228
        if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1229 1230
            DPRINTF("SAI READ CAPACITY(16)\n");
            memset(outbuf, 0, req->cmd.xfer);
1231
            bdrv_get_geometry(s->bs, &nb_sectors);
1232
            if (!nb_sectors) {
1233
                goto not_ready;
1234
            }
1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251
            nb_sectors /= s->cluster_size;
            /* Returned value is the address of the last sector.  */
            nb_sectors--;
            /* Remember the new size for read/write sanity checking. */
            s->max_lba = nb_sectors;
            outbuf[0] = (nb_sectors >> 56) & 0xff;
            outbuf[1] = (nb_sectors >> 48) & 0xff;
            outbuf[2] = (nb_sectors >> 40) & 0xff;
            outbuf[3] = (nb_sectors >> 32) & 0xff;
            outbuf[4] = (nb_sectors >> 24) & 0xff;
            outbuf[5] = (nb_sectors >> 16) & 0xff;
            outbuf[6] = (nb_sectors >> 8) & 0xff;
            outbuf[7] = nb_sectors & 0xff;
            outbuf[8] = 0;
            outbuf[9] = 0;
            outbuf[10] = s->cluster_size * 2;
            outbuf[11] = 0;
C
Christoph Hellwig 已提交
1252 1253
            outbuf[12] = 0;
            outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1254 1255 1256 1257 1258 1259

            /* set TPE bit if the format supports discard */
            if (s->qdev.conf.discard_granularity) {
                outbuf[14] = 0x80;
            }

1260 1261 1262 1263 1264 1265
            /* Protection, exponent and lowest lba field left blank. */
            buflen = req->cmd.xfer;
            break;
        }
        DPRINTF("Unsupported Service Action In\n");
        goto illegal_request;
1266
    case VERIFY_10:
1267
        break;
1268
    default:
1269
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1270
        return -1;
1271 1272 1273 1274
    }
    return buflen;

not_ready:
1275
    if (s->tray_open || !bdrv_is_inserted(s->bs)) {
1276
        scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1277
    } else {
1278
        scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1279
    }
1280
    return -1;
1281 1282

illegal_request:
1283 1284 1285
    if (r->req.status == -1) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
    }
1286
    return -1;
1287 1288
}

P
pbrook 已提交
1289 1290 1291 1292 1293
/* Execute a scsi command.  Returns the length of the data expected by the
   command.  This will be Positive for data transfers from the device
   (eg. disk reads), negative for transfers to the device (eg. disk writes),
   and zero if the command does not transfer any data.  */

1294
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
P
pbrook 已提交
1295
{
1296 1297
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
P
Paolo Bonzini 已提交
1298
    int32_t len;
P
pbrook 已提交
1299
    uint8_t command;
1300
    int rc;
P
pbrook 已提交
1301 1302

    command = buf[0];
1303
    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
1304

P
pbrook 已提交
1305 1306 1307
#ifdef DEBUG_SCSI
    {
        int i;
1308
        for (i = 1; i < r->req.cmd.len; i++) {
P
pbrook 已提交
1309 1310 1311 1312 1313
            printf(" 0x%02x", buf[i]);
        }
        printf("\n");
    }
#endif
1314

P
pbrook 已提交
1315
    switch (command) {
1316
    case TEST_UNIT_READY:
1317
    case INQUIRY:
1318 1319
    case MODE_SENSE:
    case MODE_SENSE_10:
1320 1321 1322 1323
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
1324
    case START_STOP:
1325
    case ALLOW_MEDIUM_REMOVAL:
1326
    case READ_CAPACITY_10:
1327
    case READ_TOC:
1328
    case READ_DVD_STRUCTURE:
1329
    case GET_CONFIGURATION:
1330 1331
    case GET_EVENT_STATUS_NOTIFICATION:
    case MECHANISM_STATUS:
1332
    case SERVICE_ACTION_IN_16:
1333
    case VERIFY_10:
1334
        rc = scsi_disk_emulate_command(r);
1335
        if (rc < 0) {
1336
            return 0;
1337
        }
1338 1339

        r->iov.iov_len = rc;
1340
        break;
1341 1342 1343 1344 1345 1346 1347
    case SYNCHRONIZE_CACHE:
        bdrv_acct_start(s->bs, &r->acct, 0, BDRV_ACCT_FLUSH);
        r->req.aiocb = bdrv_aio_flush(s->bs, scsi_flush_complete, r);
        if (r->req.aiocb == NULL) {
            scsi_flush_complete(r, -EIO);
        }
        return 0;
1348 1349
    case READ_6:
    case READ_10:
G
Gerd Hoffmann 已提交
1350 1351
    case READ_12:
    case READ_16:
1352
        len = r->req.cmd.xfer / s->qdev.blocksize;
1353
        DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
1354
        if (r->req.cmd.lba > s->max_lba) {
1355
            goto illegal_lba;
1356
        }
1357
        r->sector = r->req.cmd.lba * s->cluster_size;
P
pbrook 已提交
1358
        r->sector_count = len * s->cluster_size;
P
pbrook 已提交
1359
        break;
1360 1361
    case WRITE_6:
    case WRITE_10:
G
Gerd Hoffmann 已提交
1362 1363
    case WRITE_12:
    case WRITE_16:
1364
    case WRITE_VERIFY_10:
1365 1366
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1367
        len = r->req.cmd.xfer / s->qdev.blocksize;
1368
        DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
1369 1370
                (command & 0xe) == 0xe ? "And Verify " : "",
                r->req.cmd.lba, len);
1371
        if (r->req.cmd.lba > s->max_lba) {
1372
            goto illegal_lba;
1373
        }
1374
        r->sector = r->req.cmd.lba * s->cluster_size;
P
pbrook 已提交
1375
        r->sector_count = len * s->cluster_size;
P
pbrook 已提交
1376
        break;
1377
    case MODE_SELECT:
1378
        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1379 1380
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1381
        if (r->req.cmd.xfer > 12) {
1382 1383 1384 1385
            goto fail;
        }
        break;
    case MODE_SELECT_10:
1386
        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1387 1388
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1389
        if (r->req.cmd.xfer > 16) {
1390 1391 1392 1393 1394
            goto fail;
        }
        break;
    case SEEK_6:
    case SEEK_10:
1395 1396 1397
        DPRINTF("Seek(%d) (sector %" PRId64 ")\n", command == SEEK_6 ? 6 : 10,
                r->req.cmd.lba);
        if (r->req.cmd.lba > s->max_lba) {
1398 1399
            goto illegal_lba;
        }
1400 1401
        break;
    case WRITE_SAME_16:
1402
        len = r->req.cmd.xfer / s->qdev.blocksize;
1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424

        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
                r->req.cmd.lba, len);

        if (r->req.cmd.lba > s->max_lba) {
            goto illegal_lba;
        }

        /*
         * We only support WRITE SAME with the unmap bit set for now.
         */
        if (!(buf[1] & 0x8)) {
            goto fail;
        }

        rc = bdrv_discard(s->bs, r->req.cmd.lba * s->cluster_size,
                          len * s->cluster_size);
        if (rc < 0) {
            /* XXX: better error code ?*/
            goto fail;
        }

1425
        break;
1426 1427
    case REQUEST_SENSE:
        abort();
P
pbrook 已提交
1428
    default:
1429
        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1430
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1431
        return 0;
P
pbrook 已提交
1432
    fail:
1433
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1434
        return 0;
1435
    illegal_lba:
1436
        scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1437
        return 0;
P
pbrook 已提交
1438
    }
1439
    if (r->sector_count == 0 && r->iov.iov_len == 0) {
1440
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
1441
    }
1442
    len = r->sector_count * 512 + r->iov.iov_len;
1443 1444
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        return -len;
P
pbrook 已提交
1445
    } else {
1446
        if (!r->sector_count) {
P
pbrook 已提交
1447
            r->sector_count = -1;
1448
        }
1449
        return len;
P
pbrook 已提交
1450 1451 1452
    }
}

J
Jan Kiszka 已提交
1453 1454 1455 1456 1457
static void scsi_disk_reset(DeviceState *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
    uint64_t nb_sectors;

1458
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
J
Jan Kiszka 已提交
1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471

    bdrv_get_geometry(s->bs, &nb_sectors);
    nb_sectors /= s->cluster_size;
    if (nb_sectors) {
        nb_sectors--;
    }
    s->max_lba = nb_sectors;
}

static void scsi_destroy(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);

1472
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1473
    blockdev_mark_auto_del(s->qdev.conf.bs);
G
Gerd Hoffmann 已提交
1474 1475
}

1476
static void scsi_cd_change_media_cb(void *opaque, bool load)
1477
{
1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492
    SCSIDiskState *s = opaque;

    /*
     * When a CD gets changed, we have to report an ejected state and
     * then a loaded state to guests so that they detect tray
     * open/close and media change events.  Guests that do not use
     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
     * states rely on this behavior.
     *
     * media_changed governs the state machine used for unit attention
     * report.  media_event is used by GET EVENT STATUS NOTIFICATION.
     */
    s->media_changed = load;
    s->tray_open = !load;
    s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
1493
    s->media_event = true;
1494 1495
}

1496 1497 1498 1499 1500
static bool scsi_cd_is_tray_open(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_open;
}

1501 1502 1503 1504 1505 1506
static bool scsi_cd_is_medium_locked(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_locked;
}

static const BlockDevOps scsi_cd_block_ops = {
1507
    .change_media_cb = scsi_cd_change_media_cb,
1508
    .is_tray_open = scsi_cd_is_tray_open,
1509 1510 1511
    .is_medium_locked = scsi_cd_is_medium_locked,
};

1512 1513 1514 1515 1516 1517 1518 1519 1520
static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    if (s->media_changed) {
        s->media_changed = false;
        s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
    }
}

H
Hannes Reinecke 已提交
1521
static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
P
pbrook 已提交
1522
{
1523
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1524
    DriveInfo *dinfo;
P
pbrook 已提交
1525

1526
    if (!s->qdev.conf.bs) {
1527
        error_report("scsi-disk: drive property not set");
1528 1529
        return -1;
    }
1530
    s->bs = s->qdev.conf.bs;
1531

H
Hannes Reinecke 已提交
1532
    if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->bs)) {
1533 1534 1535 1536
        error_report("Device needs media, but drive is empty");
        return -1;
    }

1537
    if (!s->serial) {
1538 1539
        /* try to fall back to value set with legacy -drive serial=... */
        dinfo = drive_get_by_blockdev(s->bs);
1540
        if (*dinfo->serial) {
1541
            s->serial = g_strdup(dinfo->serial);
1542
        }
1543 1544
    }

1545
    if (!s->version) {
1546
        s->version = g_strdup(QEMU_VERSION);
1547 1548
    }

1549
    if (bdrv_is_sg(s->bs)) {
1550
        error_report("scsi-disk: unwanted /dev/sg*");
1551 1552 1553
        return -1;
    }

H
Hannes Reinecke 已提交
1554
    if (scsi_type == TYPE_ROM) {
1555
        bdrv_set_dev_ops(s->bs, &scsi_cd_block_ops, s);
1556
        s->qdev.blocksize = 2048;
H
Hannes Reinecke 已提交
1557
    } else if (scsi_type == TYPE_DISK) {
1558
        s->qdev.blocksize = s->qdev.conf.logical_block_size;
H
Hannes Reinecke 已提交
1559 1560 1561
    } else {
        error_report("scsi-disk: Unhandled SCSI type %02x", scsi_type);
        return -1;
P
pbrook 已提交
1562
    }
1563
    s->cluster_size = s->qdev.blocksize / 512;
1564
    bdrv_set_buffer_alignment(s->bs, s->qdev.blocksize);
1565

H
Hannes Reinecke 已提交
1566
    s->qdev.type = scsi_type;
1567
    qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
L
Luiz Capitulino 已提交
1568
    bdrv_iostatus_enable(s->bs);
1569
    add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
1570 1571 1572
    return 0;
}

1573 1574
static int scsi_hd_initfn(SCSIDevice *dev)
{
H
Hannes Reinecke 已提交
1575
    return scsi_initfn(dev, TYPE_DISK);
1576 1577 1578 1579
}

static int scsi_cd_initfn(SCSIDevice *dev)
{
H
Hannes Reinecke 已提交
1580
    return scsi_initfn(dev, TYPE_ROM);
1581 1582 1583 1584
}

static int scsi_disk_initfn(SCSIDevice *dev)
{
1585
    DriveInfo *dinfo;
H
Hannes Reinecke 已提交
1586
    uint8_t scsi_type;
1587 1588

    if (!dev->conf.bs) {
H
Hannes Reinecke 已提交
1589
        scsi_type = TYPE_DISK;  /* will die in scsi_initfn() */
1590
    } else {
1591
        dinfo = drive_get_by_blockdev(dev->conf.bs);
H
Hannes Reinecke 已提交
1592
        scsi_type = dinfo->media_cd ? TYPE_ROM : TYPE_DISK;
1593 1594
    }

H
Hannes Reinecke 已提交
1595
    return scsi_initfn(dev, scsi_type);
1596 1597
}

P
Paolo Bonzini 已提交
1598 1599
static SCSIReqOps scsi_disk_reqops = {
    .size         = sizeof(SCSIDiskReq),
1600 1601 1602 1603 1604 1605
    .free_req     = scsi_free_request,
    .send_command = scsi_send_command,
    .read_data    = scsi_read_data,
    .write_data   = scsi_write_data,
    .cancel_io    = scsi_cancel_io,
    .get_buf      = scsi_get_buf,
P
Paolo Bonzini 已提交
1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617
};

static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag,
                                     uint32_t lun, void *hba_private)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
    SCSIRequest *req;

    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
    return req;
}

1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631
#define DEFINE_SCSI_DISK_PROPERTIES()                           \
    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)

static SCSIDeviceInfo scsi_disk_info[] = {
    {
        .qdev.name    = "scsi-hd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_hd_initfn,
        .destroy      = scsi_destroy,
1632
        .alloc_req    = scsi_new_request,
1633
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    },{
        .qdev.name    = "scsi-cd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI CD-ROM",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_cd_initfn,
        .destroy      = scsi_destroy,
1647
        .alloc_req    = scsi_new_request,
1648
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
    },{
        .qdev.name    = "scsi-disk", /* legacy -device scsi-disk */
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk or CD-ROM (legacy)",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_disk_initfn,
        .destroy      = scsi_destroy,
1661
        .alloc_req    = scsi_new_request,
1662
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1663 1664 1665 1666 1667 1668
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    }
1669 1670 1671 1672
};

static void scsi_disk_register_devices(void)
{
1673 1674 1675 1676 1677
    int i;

    for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
        scsi_qdev_register(&scsi_disk_info[i]);
    }
T
ths 已提交
1678
}
1679
device_init(scsi_disk_register_devices)