scsi-disk.c 53.0 KB
Newer Older
P
pbrook 已提交
1 2 3 4 5 6 7
/*
 * SCSI Device emulation
 *
 * Copyright (c) 2006 CodeSourcery.
 * Based on code by Fabrice Bellard
 *
 * Written by Paul Brook
8 9 10 11 12 13
 * Modifications:
 *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 *                                 when the allocation length of CDB is smaller
 *                                 than 36.
 *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 *                                 MODE SENSE response.
P
pbrook 已提交
14
 *
M
Matthew Fernandez 已提交
15
 * This code is licensed under the LGPL.
P
pbrook 已提交
16 17
 *
 * Note that this file only handles the SCSI architecture model and device
18 19
 * commands.  Emulation of interface/link layer protocols is handled by
 * the host adapter emulator.
P
pbrook 已提交
20 21 22 23 24
 */

//#define DEBUG_SCSI

#ifdef DEBUG_SCSI
25 26
#define DPRINTF(fmt, ...) \
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
27
#else
28
#define DPRINTF(fmt, ...) do {} while(0)
P
pbrook 已提交
29 30
#endif

31 32
#define BADF(fmt, ...) \
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
33

P
pbrook 已提交
34
#include "qemu-common.h"
35
#include "qemu-error.h"
G
Gerd Hoffmann 已提交
36
#include "scsi.h"
G
Gerd Hoffmann 已提交
37
#include "scsi-defs.h"
38
#include "sysemu.h"
B
Blue Swirl 已提交
39
#include "blockdev.h"
40
#include "block_int.h"
41

42 43 44 45
#ifdef __linux
#include <scsi/sg.h>
#endif

46
#define SCSI_DMA_BUF_SIZE    131072
47
#define SCSI_MAX_INQUIRY_LEN 256
P
pbrook 已提交
48

49 50
typedef struct SCSIDiskState SCSIDiskState;

51 52
typedef struct SCSIDiskReq {
    SCSIRequest req;
P
pbrook 已提交
53
    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
54 55
    uint64_t sector;
    uint32_t sector_count;
56
    uint32_t buflen;
57 58
    struct iovec iov;
    QEMUIOVector qiov;
59
    BlockAcctCookie acct;
60
} SCSIDiskReq;
P
pbrook 已提交
61

62
struct SCSIDiskState
P
pbrook 已提交
63
{
64
    SCSIDevice qdev;
65
    uint32_t removable;
66
    bool media_changed;
67
    bool media_event;
68
    bool eject_request;
69
    QEMUBH *bh;
G
Gerd Hoffmann 已提交
70
    char *version;
71
    char *serial;
72
    bool tray_open;
73
    bool tray_locked;
P
pbrook 已提交
74 75
};

76
static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
K
Kevin Wolf 已提交
77

P
Paolo Bonzini 已提交
78
static void scsi_free_request(SCSIRequest *req)
P
pbrook 已提交
79
{
P
Paolo Bonzini 已提交
80 81
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

82 83 84
    if (r->iov.iov_base) {
        qemu_vfree(r->iov.iov_base);
    }
P
pbrook 已提交
85 86
}

87 88
/* Helper function for command completion with sense.  */
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
G
Gerd Hoffmann 已提交
89
{
B
Blue Swirl 已提交
90 91
    DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
            r->req.tag, sense.key, sense.asc, sense.ascq);
92 93
    scsi_req_build_sense(&r->req, sense);
    scsi_req_complete(&r->req, CHECK_CONDITION);
P
pbrook 已提交
94 95 96
}

/* Cancel a pending data transfer.  */
97
static void scsi_cancel_io(SCSIRequest *req)
P
pbrook 已提交
98
{
99 100 101 102 103
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    DPRINTF("Cancel tag=0x%x\n", req->tag);
    if (r->req.aiocb) {
        bdrv_aio_cancel(r->req.aiocb);
104 105 106 107 108

        /* This reference was left in by scsi_*_data.  We take ownership of
         * it the moment scsi_req_cancel is called, independent of whether
         * bdrv_aio_cancel completes the request or not.  */
        scsi_req_unref(&r->req);
P
pbrook 已提交
109
    }
110
    r->req.aiocb = NULL;
P
pbrook 已提交
111 112
}

113 114
static uint32_t scsi_init_iovec(SCSIDiskReq *r)
{
115 116 117 118
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (!r->iov.iov_base) {
        r->buflen = SCSI_DMA_BUF_SIZE;
119
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
120 121
    }
    r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
122 123 124 125
    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
    return r->qiov.size / 512;
}

P
pbrook 已提交
126 127
static void scsi_read_complete(void * opaque, int ret)
{
128
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
129
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
130
    int n;
P
pbrook 已提交
131

P
Paolo Bonzini 已提交
132 133
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
134
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
135
    }
136

P
pbrook 已提交
137
    if (ret) {
138
        if (scsi_handle_rw_error(r, -ret)) {
139
            goto done;
K
Kevin Wolf 已提交
140
        }
P
pbrook 已提交
141
    }
K
Kevin Wolf 已提交
142

143
    DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
P
pbrook 已提交
144

145
    n = r->qiov.size / 512;
K
Kevin Wolf 已提交
146 147
    r->sector += n;
    r->sector_count -= n;
148
    scsi_req_data(&r->req, r->qiov.size);
149 150 151 152 153

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
154 155
}

156 157 158 159 160 161 162
static void scsi_flush_complete(void * opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
163
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
164 165 166
    }

    if (ret < 0) {
167
        if (scsi_handle_rw_error(r, -ret)) {
168
            goto done;
169 170 171 172
        }
    }

    scsi_req_complete(&r->req, GOOD);
173 174 175 176 177

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
178
}
K
Kevin Wolf 已提交
179

180 181
/* Read more data from scsi device into buffer.  */
static void scsi_read_data(SCSIRequest *req)
P
pbrook 已提交
182
{
183
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
K
Kevin Wolf 已提交
184
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
185 186
    uint32_t n;

P
pbrook 已提交
187
    if (r->sector_count == (uint32_t)-1) {
188
        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
P
pbrook 已提交
189
        r->sector_count = 0;
P
Paolo Bonzini 已提交
190
        scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
191
        return;
P
pbrook 已提交
192
    }
P
pbrook 已提交
193 194
    DPRINTF("Read sector_count=%d\n", r->sector_count);
    if (r->sector_count == 0) {
195 196
        /* This also clears the sense buffer for REQUEST SENSE.  */
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
197
        return;
P
pbrook 已提交
198 199
    }

200 201 202
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

203 204
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
205 206 207 208 209 210
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_read_complete(r, -EINVAL);
        return;
    }

211 212
    if (s->tray_open) {
        scsi_read_complete(r, -ENOMEDIUM);
213
        return;
214
    }
215

216
    n = scsi_init_iovec(r);
217 218
    bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
    r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
219
                              scsi_read_complete, r);
220 221 222
    if (r->req.aiocb == NULL) {
        scsi_read_complete(r, -EIO);
    }
P
pbrook 已提交
223 224
}

225 226 227 228 229 230 231
/*
 * scsi_handle_rw_error has two return values.  0 means that the error
 * must be ignored, 1 means that the error has been processed and the
 * caller should not do anything else for this request.  Note that
 * scsi_handle_rw_error always manages its reference counts, independent
 * of the return value.
 */
232
static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
K
Kevin Wolf 已提交
233
{
234
    int is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
235
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
236
    BlockErrorAction action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
237

238
    if (action == BLOCK_ERR_IGNORE) {
239
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
240
        return 0;
241
    }
242 243 244

    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
            || action == BLOCK_ERR_STOP_ANY) {
K
Kevin Wolf 已提交
245

246
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
247
        vm_stop(RUN_STATE_IO_ERROR);
248
        bdrv_iostatus_set_err(s->qdev.conf.bs, error);
249
        scsi_req_retry(&r->req);
250
    } else {
251
        switch (error) {
252 253 254
        case ENOMEDIUM:
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            break;
255
        case ENOMEM:
256
            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
257 258
            break;
        case EINVAL:
259
            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
260 261
            break;
        default:
262
            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
263
            break;
264
        }
265
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_REPORT, is_read);
266 267 268 269
    }
    return 1;
}

P
pbrook 已提交
270 271
static void scsi_write_complete(void * opaque, int ret)
{
272
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
273
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
274 275
    uint32_t n;

P
Paolo Bonzini 已提交
276 277
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
278
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
279
    }
280

P
pbrook 已提交
281
    if (ret) {
282
        if (scsi_handle_rw_error(r, -ret)) {
283
            goto done;
K
Kevin Wolf 已提交
284
        }
P
pbrook 已提交
285 286
    }

287
    n = r->qiov.size / 512;
288 289
    r->sector += n;
    r->sector_count -= n;
P
pbrook 已提交
290
    if (r->sector_count == 0) {
291
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
292
    } else {
293 294 295
        scsi_init_iovec(r);
        DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, r->qiov.size);
        scsi_req_data(&r->req, r->qiov.size);
P
pbrook 已提交
296
    }
297 298 299 300 301

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
302 303
}

304
static void scsi_write_data(SCSIRequest *req)
305
{
306
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
307
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
308 309
    uint32_t n;

310 311 312
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

313 314
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
315 316 317
    if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_write_complete(r, -EINVAL);
318
        return;
319 320
    }

321
    n = r->qiov.size / 512;
322
    if (n) {
323 324
        if (s->tray_open) {
            scsi_write_complete(r, -ENOMEDIUM);
325
            return;
326
        }
327 328
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
        r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
329
                                       scsi_write_complete, r);
330
        if (r->req.aiocb == NULL) {
331
            scsi_write_complete(r, -ENOMEM);
332
        }
333
    } else {
334
        /* Called for the first time.  Ask the driver to send us more data.  */
335 336
        scsi_write_complete(r, 0);
    }
P
pbrook 已提交
337
}
P
pbrook 已提交
338

P
pbrook 已提交
339
/* Return a pointer to the data buffer.  */
340
static uint8_t *scsi_get_buf(SCSIRequest *req)
P
pbrook 已提交
341
{
342
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
P
pbrook 已提交
343

344
    return (uint8_t *)r->iov.iov_base;
P
pbrook 已提交
345 346
}

347 348
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
{
G
Gerd Hoffmann 已提交
349
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366
    int buflen = 0;

    if (req->cmd.buf[1] & 0x2) {
        /* Command support data - optional, not implemented */
        BADF("optional INQUIRY command support request not implemented\n");
        return -1;
    }

    if (req->cmd.buf[1] & 0x1) {
        /* Vital product data */
        uint8_t page_code = req->cmd.buf[2];
        if (req->cmd.xfer < 4) {
            BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
                 "less than 4\n", page_code, req->cmd.xfer);
            return -1;
        }

367
        outbuf[buflen++] = s->qdev.type & 0x1f;
368 369 370 371 372
        outbuf[buflen++] = page_code ; // this page
        outbuf[buflen++] = 0x00;

        switch (page_code) {
        case 0x00: /* Supported page codes, mandatory */
H
Hannes Reinecke 已提交
373 374
        {
            int pages;
375 376
            DPRINTF("Inquiry EVPD[Supported pages] "
                    "buffer size %zd\n", req->cmd.xfer);
H
Hannes Reinecke 已提交
377
            pages = buflen++;
378
            outbuf[buflen++] = 0x00; // list of supported pages (this page)
379
            if (s->serial) {
380
                outbuf[buflen++] = 0x80; // unit serial number
381
            }
382
            outbuf[buflen++] = 0x83; // device identification
H
Hannes Reinecke 已提交
383
            if (s->qdev.type == TYPE_DISK) {
384 385
                outbuf[buflen++] = 0xb0; // block limits
                outbuf[buflen++] = 0xb2; // thin provisioning
H
Hannes Reinecke 已提交
386 387
            }
            outbuf[pages] = buflen - pages - 1; // number of pages
388
            break;
H
Hannes Reinecke 已提交
389
        }
390 391
        case 0x80: /* Device serial number, optional */
        {
392
            int l;
393

394 395 396 397 398 399
            if (!s->serial) {
                DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
                return -1;
            }

            l = strlen(s->serial);
400
            if (l > req->cmd.xfer) {
401
                l = req->cmd.xfer;
402 403
            }
            if (l > 20) {
404
                l = 20;
405
            }
406 407 408 409

            DPRINTF("Inquiry EVPD[Serial number] "
                    "buffer size %zd\n", req->cmd.xfer);
            outbuf[buflen++] = l;
410
            memcpy(outbuf+buflen, s->serial, l);
411 412 413 414 415 416 417
            buflen += l;
            break;
        }

        case 0x83: /* Device identification page, mandatory */
        {
            int max_len = 255 - 8;
418
            int id_len = strlen(bdrv_get_device_name(s->qdev.conf.bs));
419

420
            if (id_len > max_len) {
421
                id_len = max_len;
422
            }
423 424 425
            DPRINTF("Inquiry EVPD[Device identification] "
                    "buffer size %zd\n", req->cmd.xfer);

H
Hannes Reinecke 已提交
426
            outbuf[buflen++] = 4 + id_len;
427 428 429 430 431
            outbuf[buflen++] = 0x2; // ASCII
            outbuf[buflen++] = 0;   // not officially assigned
            outbuf[buflen++] = 0;   // reserved
            outbuf[buflen++] = id_len; // length of data following

432
            memcpy(outbuf+buflen, bdrv_get_device_name(s->qdev.conf.bs), id_len);
433 434 435
            buflen += id_len;
            break;
        }
436
        case 0xb0: /* block limits */
C
Christoph Hellwig 已提交
437
        {
438 439
            unsigned int unmap_sectors =
                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
440 441 442 443
            unsigned int min_io_size =
                    s->qdev.conf.min_io_size / s->qdev.blocksize;
            unsigned int opt_io_size =
                    s->qdev.conf.opt_io_size / s->qdev.blocksize;
C
Christoph Hellwig 已提交
444

H
Hannes Reinecke 已提交
445
            if (s->qdev.type == TYPE_ROM) {
H
Hannes Reinecke 已提交
446 447 448 449
                DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                        page_code);
                return -1;
            }
C
Christoph Hellwig 已提交
450 451 452 453 454 455 456 457 458 459 460 461 462 463
            /* required VPD size with unmap support */
            outbuf[3] = buflen = 0x3c;

            memset(outbuf + 4, 0, buflen - 4);

            /* optimal transfer length granularity */
            outbuf[6] = (min_io_size >> 8) & 0xff;
            outbuf[7] = min_io_size & 0xff;

            /* optimal transfer length */
            outbuf[12] = (opt_io_size >> 24) & 0xff;
            outbuf[13] = (opt_io_size >> 16) & 0xff;
            outbuf[14] = (opt_io_size >> 8) & 0xff;
            outbuf[15] = opt_io_size & 0xff;
464 465 466 467 468 469 470 471 472 473 474 475 476 477 478

            /* optimal unmap granularity */
            outbuf[28] = (unmap_sectors >> 24) & 0xff;
            outbuf[29] = (unmap_sectors >> 16) & 0xff;
            outbuf[30] = (unmap_sectors >> 8) & 0xff;
            outbuf[31] = unmap_sectors & 0xff;
            break;
        }
        case 0xb2: /* thin provisioning */
        {
            outbuf[3] = buflen = 8;
            outbuf[4] = 0;
            outbuf[5] = 0x40; /* write same with unmap supported */
            outbuf[6] = 0;
            outbuf[7] = 0;
C
Christoph Hellwig 已提交
479 480
            break;
        }
481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504
        default:
            BADF("Error: unsupported Inquiry (EVPD[%02X]) "
                 "buffer size %zd\n", page_code, req->cmd.xfer);
            return -1;
        }
        /* done with EVPD */
        return buflen;
    }

    /* Standard INQUIRY data */
    if (req->cmd.buf[2] != 0) {
        BADF("Error: Inquiry (STANDARD) page or code "
             "is non-zero [%02X]\n", req->cmd.buf[2]);
        return -1;
    }

    /* PAGE CODE == 0 */
    if (req->cmd.xfer < 5) {
        BADF("Error: Inquiry (STANDARD) buffer size %zd "
             "is less than 5\n", req->cmd.xfer);
        return -1;
    }

    buflen = req->cmd.xfer;
505
    if (buflen > SCSI_MAX_INQUIRY_LEN) {
506
        buflen = SCSI_MAX_INQUIRY_LEN;
507
    }
508 509
    memset(outbuf, 0, buflen);

H
Hannes Reinecke 已提交
510
    outbuf[0] = s->qdev.type & 0x1f;
511
    outbuf[1] = s->removable ? 0x80 : 0;
H
Hannes Reinecke 已提交
512
    if (s->qdev.type == TYPE_ROM) {
L
Laszlo Ast 已提交
513
        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
514
    } else {
L
Laszlo Ast 已提交
515
        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
516
    }
L
Laszlo Ast 已提交
517
    memcpy(&outbuf[8], "QEMU    ", 8);
G
Gerd Hoffmann 已提交
518
    memset(&outbuf[32], 0, 4);
519
    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
520 521 522 523 524 525
    /*
     * We claim conformance to SPC-3, which is required for guests
     * to ask for modern features like READ CAPACITY(16) or the
     * block characteristics VPD page by default.  Not all of SPC-3
     * is actually implemented, but we're good enough.
     */
C
Christoph Hellwig 已提交
526
    outbuf[2] = 5;
527
    outbuf[3] = 2; /* Format 2 */
528 529 530 531 532 533 534 535 536

    if (buflen > 36) {
        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
    } else {
        /* If the allocation length of CDB is too small,
               the additional length is not adjusted */
        outbuf[4] = 36 - 5;
    }

537
    /* Sync data transfer and TCQ.  */
538
    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
539 540 541
    return buflen;
}

542 543 544 545 546 547
static inline bool media_is_dvd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
548
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
549 550
        return false;
    }
551
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
552 553 554
    return nb_sectors > CD_MAX_SECTORS;
}

555 556 557 558 559 560
static inline bool media_is_cd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
561
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
562 563
        return false;
    }
564
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
565 566 567
    return nb_sectors <= CD_MAX_SECTORS;
}

568 569 570
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
                                   uint8_t *outbuf)
{
571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591
    static const int rds_caps_size[5] = {
        [0] = 2048 + 4,
        [1] = 4 + 4,
        [3] = 188 + 4,
        [4] = 2048 + 4,
    };

    uint8_t media = r->req.cmd.buf[1];
    uint8_t layer = r->req.cmd.buf[6];
    uint8_t format = r->req.cmd.buf[7];
    int size = -1;

    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if (media != 0) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
        return -1;
    }

    if (format != 0xff) {
592
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            return -1;
        }
        if (media_is_cd(s)) {
            scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
            return -1;
        }
        if (format >= ARRAY_SIZE(rds_caps_size)) {
            return -1;
        }
        size = rds_caps_size[format];
        memset(outbuf, 0, size);
    }

    switch (format) {
    case 0x00: {
        /* Physical format information */
        uint64_t nb_sectors;
        if (layer != 0) {
            goto fail;
        }
614
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658

        outbuf[4] = 1;   /* DVD-ROM, part version 1 */
        outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
        outbuf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
        outbuf[7] = 0;   /* default densities */

        stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
        stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
        break;
    }

    case 0x01: /* DVD copyright information, all zeros */
        break;

    case 0x03: /* BCA information - invalid field for no BCA info */
        return -1;

    case 0x04: /* DVD disc manufacturing information, all zeros */
        break;

    case 0xff: { /* List capabilities */
        int i;
        size = 4;
        for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
            if (!rds_caps_size[i]) {
                continue;
            }
            outbuf[size] = i;
            outbuf[size + 1] = 0x40; /* Not writable, readable */
            stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
            size += 4;
        }
        break;
     }

    default:
        return -1;
    }

    /* Size of buffer, not including 2 byte size field */
    stw_be_p(outbuf, size - 2);
    return size;

fail:
659 660 661
    return -1;
}

662
static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
663
{
664 665 666 667 668
    uint8_t event_code, media_status;

    media_status = 0;
    if (s->tray_open) {
        media_status = MS_TRAY_OPEN;
669
    } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
670 671 672 673 674
        media_status = MS_MEDIA_PRESENT;
    }

    /* Event notification descriptor */
    event_code = MEC_NO_CHANGE;
675 676 677 678 679 680 681 682
    if (media_status != MS_TRAY_OPEN) {
        if (s->media_event) {
            event_code = MEC_NEW_MEDIA;
            s->media_event = false;
        } else if (s->eject_request) {
            event_code = MEC_EJECT_REQUESTED;
            s->eject_request = false;
        }
683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
    }

    outbuf[0] = event_code;
    outbuf[1] = media_status;

    /* These fields are reserved, just clear them. */
    outbuf[2] = 0;
    outbuf[3] = 0;
    return 4;
}

static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
                                              uint8_t *outbuf)
{
    int size;
    uint8_t *buf = r->req.cmd.buf;
    uint8_t notification_class_request = buf[4];
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if ((buf[1] & 1) == 0) {
        /* asynchronous */
        return -1;
    }

    size = 4;
    outbuf[0] = outbuf[1] = 0;
    outbuf[3] = 1 << GESN_MEDIA; /* supported events */
    if (notification_class_request & (1 << GESN_MEDIA)) {
        outbuf[2] = GESN_MEDIA;
        size += scsi_event_status_media(s, &outbuf[size]);
    } else {
        outbuf[2] = 0x80;
    }
    stw_be_p(outbuf, size - 4);
    return size;
719 720
}

721
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
722
{
723 724
    int current;

725 726 727
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752
    current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
    memset(outbuf, 0, 40);
    stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
    stw_be_p(&outbuf[6], current);
    /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
    outbuf[10] = 0x03; /* persistent, current */
    outbuf[11] = 8; /* two profiles */
    stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
    outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
    stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
    outbuf[18] = (current == MMC_PROFILE_CD_ROM);
    /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
    stw_be_p(&outbuf[20], 1);
    outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[23] = 8;
    stl_be_p(&outbuf[24], 1); /* SCSI */
    outbuf[28] = 1; /* DBE = 1, mandatory */
    /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
    stw_be_p(&outbuf[32], 3);
    outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[35] = 4;
    outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
    /* TODO: Random readable, CD read, DVD read, drive serial number,
       power management */
    return 40;
753 754 755 756 757 758 759 760 761 762 763 764
}

static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
{
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    memset(outbuf, 0, 8);
    outbuf[5] = 1; /* CD-ROM */
    return 8;
}

765
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
766
                           int page_control)
767
{
768 769 770 771
    static const int mode_sense_valid[0x3f] = {
        [MODE_PAGE_HD_GEOMETRY]            = (1 << TYPE_DISK),
        [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
        [MODE_PAGE_CACHING]                = (1 << TYPE_DISK) | (1 << TYPE_ROM),
772 773
        [MODE_PAGE_R_W_ERROR]              = (1 << TYPE_DISK) | (1 << TYPE_ROM),
        [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
774 775 776
        [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
    };

777
    BlockDriverState *bdrv = s->qdev.conf.bs;
778
    int cylinders, heads, secs;
779
    uint8_t *p = *p_outbuf;
780

781 782 783 784 785 786
    if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
        return -1;
    }

    p[0] = page;

787 788 789 790 791 792
    /*
     * If Changeable Values are requested, a mask denoting those mode parameters
     * that are changeable shall be returned. As we currently don't support
     * parameter changes via MODE_SELECT all bits are returned set to zero.
     * The buffer was already menset to zero by the caller of this function.
     */
793
    switch (page) {
794
    case MODE_PAGE_HD_GEOMETRY:
795
        p[1] = 0x16;
796
        if (page_control == 1) { /* Changeable Values */
797
            break;
798
        }
799
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
800
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822
        p[2] = (cylinders >> 16) & 0xff;
        p[3] = (cylinders >> 8) & 0xff;
        p[4] = cylinders & 0xff;
        p[5] = heads & 0xff;
        /* Write precomp start cylinder, disabled */
        p[6] = (cylinders >> 16) & 0xff;
        p[7] = (cylinders >> 8) & 0xff;
        p[8] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[9] = (cylinders >> 16) & 0xff;
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Device step rate [ns], 200ns */
        p[12] = 0;
        p[13] = 200;
        /* Landing zone cylinder */
        p[14] = 0xff;
        p[15] =  0xff;
        p[16] = 0xff;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[20] = (5400 >> 8) & 0xff;
        p[21] = 5400 & 0xff;
823
        break;
824

825
    case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
826
        p[1] = 0x1e;
827
        if (page_control == 1) { /* Changeable Values */
828
            break;
829
        }
830 831 832 833
        /* Transfer rate [kbit/s], 5Mbit/s */
        p[2] = 5000 >> 8;
        p[3] = 5000 & 0xff;
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
834
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
835 836
        p[4] = heads & 0xff;
        p[5] = secs & 0xff;
P
Paolo Bonzini 已提交
837
        p[6] = s->qdev.blocksize >> 8;
838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860
        p[8] = (cylinders >> 8) & 0xff;
        p[9] = cylinders & 0xff;
        /* Write precomp start cylinder, disabled */
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[12] = (cylinders >> 8) & 0xff;
        p[13] = cylinders & 0xff;
        /* Device step rate [100us], 100us */
        p[14] = 0;
        p[15] = 1;
        /* Device step pulse width [us], 1us */
        p[16] = 1;
        /* Device head settle delay [100us], 100us */
        p[17] = 0;
        p[18] = 1;
        /* Motor on delay [0.1s], 0.1s */
        p[19] = 1;
        /* Motor off delay [0.1s], 0.1s */
        p[20] = 1;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[28] = (5400 >> 8) & 0xff;
        p[29] = 5400 & 0xff;
861
        break;
862

863
    case MODE_PAGE_CACHING:
864 865
        p[0] = 8;
        p[1] = 0x12;
866
        if (page_control == 1) { /* Changeable Values */
867
            break;
868
        }
869
        if (bdrv_enable_write_cache(s->qdev.conf.bs)) {
870 871
            p[2] = 4; /* WCE */
        }
872
        break;
873

874 875 876 877 878 879 880 881 882 883 884 885
    case MODE_PAGE_R_W_ERROR:
        p[1] = 10;
        p[2] = 0x80; /* Automatic Write Reallocation Enabled */
        if (s->qdev.type == TYPE_ROM) {
            p[3] = 0x20; /* Read Retry Count */
        }
        break;

    case MODE_PAGE_AUDIO_CTL:
        p[1] = 14;
        break;

886
    case MODE_PAGE_CAPABILITIES:
887
        p[1] = 0x14;
888
        if (page_control == 1) { /* Changeable Values */
889
            break;
890
        }
891 892 893

        p[2] = 0x3b; /* CD-R & CD-RW read */
        p[3] = 0; /* Writing not supported */
894 895 896 897 898
        p[4] = 0x7f; /* Audio, composite, digital out,
                        mode 2 form 1&2, multi session */
        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
                        RW corrected, C2 errors, ISRC,
                        UPC, Bar code */
899
        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
900 901 902
        /* Locking supported, jumper present, eject, tray */
        p[7] = 0; /* no volume & mute control, no
                     changer */
903
        p[8] = (50 * 176) >> 8; /* 50x read speed */
904
        p[9] = (50 * 176) & 0xff;
905 906 907
        p[10] = 2 >> 8; /* Two volume levels */
        p[11] = 2 & 0xff;
        p[12] = 2048 >> 8; /* 2M buffer */
908
        p[13] = 2048 & 0xff;
909
        p[14] = (16 * 176) >> 8; /* 16x read speed current */
910
        p[15] = (16 * 176) & 0xff;
911
        p[18] = (16 * 176) >> 8; /* 16x write speed */
912
        p[19] = (16 * 176) & 0xff;
913
        p[20] = (16 * 176) >> 8; /* 16x write speed current */
914
        p[21] = (16 * 176) & 0xff;
915
        break;
916 917

    default:
918
        return -1;
919
    }
920 921 922

    *p_outbuf += p[1] + 2;
    return p[1] + 2;
923 924
}

925
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
926
{
927
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
928
    uint64_t nb_sectors;
929
    int page, dbd, buflen, ret, page_control;
930
    uint8_t *p;
931
    uint8_t dev_specific_param;
932

933 934 935
    dbd = r->req.cmd.buf[1]  & 0x8;
    page = r->req.cmd.buf[2] & 0x3f;
    page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
936
    DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
937 938
        (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
    memset(outbuf, 0, r->req.cmd.xfer);
939 940
    p = outbuf;

941
    if (bdrv_is_read_only(s->qdev.conf.bs)) {
942 943 944 945 946
        dev_specific_param = 0x80; /* Readonly.  */
    } else {
        dev_specific_param = 0x00;
    }

947
    if (r->req.cmd.buf[0] == MODE_SENSE) {
948 949 950 951 952 953 954 955 956
        p[1] = 0; /* Default media type.  */
        p[2] = dev_specific_param;
        p[3] = 0; /* Block descriptor length.  */
        p += 4;
    } else { /* MODE_SENSE_10 */
        p[2] = 0; /* Default media type.  */
        p[3] = dev_specific_param;
        p[6] = p[7] = 0; /* Block descriptor length.  */
        p += 8;
957 958
    }

959
    /* MMC prescribes that CD/DVD drives have no block descriptors.  */
960
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
961
    if (!dbd && s->qdev.type == TYPE_DISK && nb_sectors) {
962
        if (r->req.cmd.buf[0] == MODE_SENSE) {
963 964 965 966
            outbuf[3] = 8; /* Block descriptor length  */
        } else { /* MODE_SENSE_10 */
            outbuf[7] = 8; /* Block descriptor length  */
        }
P
Paolo Bonzini 已提交
967
        nb_sectors /= (s->qdev.blocksize / 512);
968
        if (nb_sectors > 0xffffff) {
969
            nb_sectors = 0;
970
        }
971 972 973 974 975 976
        p[0] = 0; /* media density code */
        p[1] = (nb_sectors >> 16) & 0xff;
        p[2] = (nb_sectors >> 8) & 0xff;
        p[3] = nb_sectors & 0xff;
        p[4] = 0; /* reserved */
        p[5] = 0; /* bytes 5-7 are the sector size in bytes */
P
Paolo Bonzini 已提交
977
        p[6] = s->qdev.blocksize >> 8;
978 979 980 981
        p[7] = 0;
        p += 8;
    }

982 983 984 985
    if (page_control == 3) {
        /* Saved Values */
        scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
        return -1;
986 987
    }

988 989 990 991 992 993 994 995 996
    if (page == 0x3f) {
        for (page = 0; page <= 0x3e; page++) {
            mode_sense_page(s, page, &p, page_control);
        }
    } else {
        ret = mode_sense_page(s, page, &p, page_control);
        if (ret == -1) {
            return -1;
        }
997 998 999
    }

    buflen = p - outbuf;
1000 1001 1002 1003 1004
    /*
     * The mode data length field specifies the length in bytes of the
     * following data that is available to be transferred. The mode data
     * length does not include itself.
     */
1005
    if (r->req.cmd.buf[0] == MODE_SENSE) {
1006 1007 1008 1009 1010
        outbuf[0] = buflen - 1;
    } else { /* MODE_SENSE_10 */
        outbuf[0] = ((buflen - 2) >> 8) & 0xff;
        outbuf[1] = (buflen - 2) & 0xff;
    }
1011
    if (buflen > r->req.cmd.xfer) {
1012
        buflen = r->req.cmd.xfer;
1013
    }
1014 1015 1016
    return buflen;
}

1017 1018 1019 1020 1021 1022 1023 1024 1025
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    int start_track, format, msf, toclen;
    uint64_t nb_sectors;

    msf = req->cmd.buf[1] & 2;
    format = req->cmd.buf[2] & 0xf;
    start_track = req->cmd.buf[6];
1026
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1027
    DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
P
Paolo Bonzini 已提交
1028
    nb_sectors /= s->qdev.blocksize / 512;
1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046
    switch (format) {
    case 0:
        toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
        break;
    case 1:
        /* multi session : only a single session defined */
        toclen = 12;
        memset(outbuf, 0, 12);
        outbuf[1] = 0x0a;
        outbuf[2] = 0x01;
        outbuf[3] = 0x01;
        break;
    case 2:
        toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
        break;
    default:
        return -1;
    }
1047
    if (toclen > req->cmd.xfer) {
1048
        toclen = req->cmd.xfer;
1049
    }
1050 1051 1052
    return toclen;
}

1053
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1054 1055 1056 1057 1058 1059 1060
{
    SCSIRequest *req = &r->req;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    bool start = req->cmd.buf[4] & 1;
    bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */

    if (s->qdev.type == TYPE_ROM && loej) {
1061 1062
        if (!start && !s->tray_open && s->tray_locked) {
            scsi_check_condition(r,
1063
                                 bdrv_is_inserted(s->qdev.conf.bs)
1064 1065 1066
                                 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
                                 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
            return -1;
1067
        }
1068
        bdrv_eject(s->qdev.conf.bs, !start);
1069
        s->tray_open = !start;
1070
    }
1071
    return 0;
1072 1073
}

1074
static int scsi_disk_emulate_command(SCSIDiskReq *r)
1075
{
1076
    SCSIRequest *req = &r->req;
1077 1078
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    uint64_t nb_sectors;
1079
    uint8_t *outbuf;
1080 1081
    int buflen = 0;

1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094
    if (!r->iov.iov_base) {
        /*
         * FIXME: we shouldn't return anything bigger than 4k, but the code
         * requires the buffer to be as big as req->cmd.xfer in several
         * places.  So, do not allow CDBs with a very large ALLOCATION
         * LENGTH.  The real fix would be to modify scsi_read_data and
         * dma_buf_read, so that they return data beyond the buflen
         * as all zeros.
         */
        if (req->cmd.xfer > 65536) {
            goto illegal_request;
        }
        r->buflen = MAX(4096, req->cmd.xfer);
1095
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
1096 1097 1098
    }

    outbuf = r->iov.iov_base;
1099 1100
    switch (req->cmd.buf[0]) {
    case TEST_UNIT_READY:
1101
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1102
            goto not_ready;
1103
        }
H
Hannes Reinecke 已提交
1104
        break;
1105 1106
    case INQUIRY:
        buflen = scsi_disk_emulate_inquiry(req, outbuf);
1107
        if (buflen < 0) {
1108
            goto illegal_request;
1109
        }
H
Hannes Reinecke 已提交
1110
        break;
1111 1112
    case MODE_SENSE:
    case MODE_SENSE_10:
1113
        buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1114
        if (buflen < 0) {
1115
            goto illegal_request;
1116
        }
1117
        break;
1118 1119
    case READ_TOC:
        buflen = scsi_disk_emulate_read_toc(req, outbuf);
1120
        if (buflen < 0) {
1121
            goto illegal_request;
1122
        }
1123
        break;
1124
    case RESERVE:
1125
        if (req->cmd.buf[1] & 1) {
1126
            goto illegal_request;
1127
        }
1128 1129
        break;
    case RESERVE_10:
1130
        if (req->cmd.buf[1] & 3) {
1131
            goto illegal_request;
1132
        }
1133 1134
        break;
    case RELEASE:
1135
        if (req->cmd.buf[1] & 1) {
1136
            goto illegal_request;
1137
        }
1138 1139
        break;
    case RELEASE_10:
1140
        if (req->cmd.buf[1] & 3) {
1141
            goto illegal_request;
1142
        }
1143
        break;
1144
    case START_STOP:
1145 1146 1147
        if (scsi_disk_emulate_start_stop(r) < 0) {
            return -1;
        }
H
Hannes Reinecke 已提交
1148
        break;
1149
    case ALLOW_MEDIUM_REMOVAL:
1150
        s->tray_locked = req->cmd.buf[4] & 1;
1151
        bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
H
Hannes Reinecke 已提交
1152
        break;
1153
    case READ_CAPACITY_10:
1154
        /* The normal LEN field for this command is zero.  */
H
Hannes Reinecke 已提交
1155
        memset(outbuf, 0, 8);
1156
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1157
        if (!nb_sectors) {
1158
            goto not_ready;
1159
        }
1160 1161 1162
        if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
            goto illegal_request;
        }
P
Paolo Bonzini 已提交
1163
        nb_sectors /= s->qdev.blocksize / 512;
1164 1165 1166
        /* Returned value is the address of the last sector.  */
        nb_sectors--;
        /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1167
        s->qdev.max_lba = nb_sectors;
1168
        /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1169
        if (nb_sectors > UINT32_MAX) {
1170
            nb_sectors = UINT32_MAX;
1171
        }
1172 1173 1174 1175 1176 1177
        outbuf[0] = (nb_sectors >> 24) & 0xff;
        outbuf[1] = (nb_sectors >> 16) & 0xff;
        outbuf[2] = (nb_sectors >> 8) & 0xff;
        outbuf[3] = nb_sectors & 0xff;
        outbuf[4] = 0;
        outbuf[5] = 0;
P
Paolo Bonzini 已提交
1178
        outbuf[6] = s->qdev.blocksize >> 8;
1179 1180
        outbuf[7] = 0;
        buflen = 8;
H
Hannes Reinecke 已提交
1181
        break;
1182 1183 1184 1185 1186 1187
    case MECHANISM_STATUS:
        buflen = scsi_emulate_mechanism_status(s, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
1188
    case GET_CONFIGURATION:
1189
        buflen = scsi_get_configuration(s, outbuf);
1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case GET_EVENT_STATUS_NOTIFICATION:
        buflen = scsi_get_event_status_notification(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case READ_DVD_STRUCTURE:
        buflen = scsi_read_dvd_structure(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
1205
        break;
1206
    case SERVICE_ACTION_IN_16:
1207
        /* Service Action In subcommands. */
1208
        if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1209 1210
            DPRINTF("SAI READ CAPACITY(16)\n");
            memset(outbuf, 0, req->cmd.xfer);
1211
            bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1212
            if (!nb_sectors) {
1213
                goto not_ready;
1214
            }
1215 1216 1217
            if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
                goto illegal_request;
            }
P
Paolo Bonzini 已提交
1218
            nb_sectors /= s->qdev.blocksize / 512;
1219 1220 1221
            /* Returned value is the address of the last sector.  */
            nb_sectors--;
            /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1222
            s->qdev.max_lba = nb_sectors;
1223 1224 1225 1226 1227 1228 1229 1230 1231 1232
            outbuf[0] = (nb_sectors >> 56) & 0xff;
            outbuf[1] = (nb_sectors >> 48) & 0xff;
            outbuf[2] = (nb_sectors >> 40) & 0xff;
            outbuf[3] = (nb_sectors >> 32) & 0xff;
            outbuf[4] = (nb_sectors >> 24) & 0xff;
            outbuf[5] = (nb_sectors >> 16) & 0xff;
            outbuf[6] = (nb_sectors >> 8) & 0xff;
            outbuf[7] = nb_sectors & 0xff;
            outbuf[8] = 0;
            outbuf[9] = 0;
P
Paolo Bonzini 已提交
1233
            outbuf[10] = s->qdev.blocksize >> 8;
1234
            outbuf[11] = 0;
C
Christoph Hellwig 已提交
1235 1236
            outbuf[12] = 0;
            outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1237 1238 1239 1240 1241 1242

            /* set TPE bit if the format supports discard */
            if (s->qdev.conf.discard_granularity) {
                outbuf[14] = 0x80;
            }

1243 1244 1245 1246 1247 1248
            /* Protection, exponent and lowest lba field left blank. */
            buflen = req->cmd.xfer;
            break;
        }
        DPRINTF("Unsupported Service Action In\n");
        goto illegal_request;
1249
    case VERIFY_10:
1250
        break;
1251
    default:
1252
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1253
        return -1;
1254 1255 1256 1257
    }
    return buflen;

not_ready:
1258
    if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1259
        scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1260
    } else {
1261
        scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1262
    }
1263
    return -1;
1264 1265

illegal_request:
1266 1267 1268
    if (r->req.status == -1) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
    }
1269
    return -1;
1270 1271
}

P
pbrook 已提交
1272 1273 1274 1275 1276
/* Execute a scsi command.  Returns the length of the data expected by the
   command.  This will be Positive for data transfers from the device
   (eg. disk reads), negative for transfers to the device (eg. disk writes),
   and zero if the command does not transfer any data.  */

1277
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
P
pbrook 已提交
1278
{
1279 1280
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
P
Paolo Bonzini 已提交
1281
    int32_t len;
P
pbrook 已提交
1282
    uint8_t command;
1283
    int rc;
P
pbrook 已提交
1284 1285

    command = buf[0];
1286
    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
1287

P
pbrook 已提交
1288 1289 1290
#ifdef DEBUG_SCSI
    {
        int i;
1291
        for (i = 1; i < r->req.cmd.len; i++) {
P
pbrook 已提交
1292 1293 1294 1295 1296
            printf(" 0x%02x", buf[i]);
        }
        printf("\n");
    }
#endif
1297

P
pbrook 已提交
1298
    switch (command) {
1299
    case TEST_UNIT_READY:
1300
    case INQUIRY:
1301 1302
    case MODE_SENSE:
    case MODE_SENSE_10:
1303 1304 1305 1306
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
1307
    case START_STOP:
1308
    case ALLOW_MEDIUM_REMOVAL:
1309
    case READ_CAPACITY_10:
1310
    case READ_TOC:
1311
    case READ_DVD_STRUCTURE:
1312
    case GET_CONFIGURATION:
1313 1314
    case GET_EVENT_STATUS_NOTIFICATION:
    case MECHANISM_STATUS:
1315
    case SERVICE_ACTION_IN_16:
1316
    case VERIFY_10:
1317
        rc = scsi_disk_emulate_command(r);
1318
        if (rc < 0) {
1319
            return 0;
1320
        }
1321 1322

        r->iov.iov_len = rc;
1323
        break;
1324
    case SYNCHRONIZE_CACHE:
1325 1326
        /* The request is used as the AIO opaque value, so add a ref.  */
        scsi_req_ref(&r->req);
1327 1328
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
1329 1330 1331 1332
        if (r->req.aiocb == NULL) {
            scsi_flush_complete(r, -EIO);
        }
        return 0;
1333 1334
    case READ_6:
    case READ_10:
G
Gerd Hoffmann 已提交
1335 1336
    case READ_12:
    case READ_16:
1337
        len = r->req.cmd.xfer / s->qdev.blocksize;
1338
        DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1339
        if (r->req.cmd.lba > s->qdev.max_lba) {
1340
            goto illegal_lba;
1341
        }
P
Paolo Bonzini 已提交
1342 1343
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1344
        break;
1345 1346
    case WRITE_6:
    case WRITE_10:
G
Gerd Hoffmann 已提交
1347 1348
    case WRITE_12:
    case WRITE_16:
1349
    case WRITE_VERIFY_10:
1350 1351
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1352
        len = r->req.cmd.xfer / s->qdev.blocksize;
1353
        DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
1354 1355
                (command & 0xe) == 0xe ? "And Verify " : "",
                r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1356
        if (r->req.cmd.lba > s->qdev.max_lba) {
1357
            goto illegal_lba;
1358
        }
P
Paolo Bonzini 已提交
1359 1360
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1361
        break;
1362
    case MODE_SELECT:
1363
        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1364 1365
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1366
        if (r->req.cmd.xfer > 12) {
1367 1368 1369 1370
            goto fail;
        }
        break;
    case MODE_SELECT_10:
1371
        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1372 1373
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1374
        if (r->req.cmd.xfer > 16) {
1375 1376 1377 1378
            goto fail;
        }
        break;
    case SEEK_10:
P
Paolo Bonzini 已提交
1379
        DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
P
Paolo Bonzini 已提交
1380
        if (r->req.cmd.lba > s->qdev.max_lba) {
1381 1382
            goto illegal_lba;
        }
1383 1384
        break;
    case WRITE_SAME_16:
1385
        len = r->req.cmd.xfer / s->qdev.blocksize;
1386 1387 1388 1389

        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
                r->req.cmd.lba, len);

P
Paolo Bonzini 已提交
1390
        if (r->req.cmd.lba > s->qdev.max_lba) {
1391 1392 1393 1394 1395 1396 1397 1398 1399 1400
            goto illegal_lba;
        }

        /*
         * We only support WRITE SAME with the unmap bit set for now.
         */
        if (!(buf[1] & 0x8)) {
            goto fail;
        }

P
Paolo Bonzini 已提交
1401 1402 1403
        rc = bdrv_discard(s->qdev.conf.bs,
                          r->req.cmd.lba * (s->qdev.blocksize / 512),
                          len * (s->qdev.blocksize / 512));
1404 1405 1406 1407 1408
        if (rc < 0) {
            /* XXX: better error code ?*/
            goto fail;
        }

1409
        break;
1410 1411
    case REQUEST_SENSE:
        abort();
P
pbrook 已提交
1412
    default:
1413
        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1414
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1415
        return 0;
P
pbrook 已提交
1416
    fail:
1417
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1418
        return 0;
1419
    illegal_lba:
1420
        scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1421
        return 0;
P
pbrook 已提交
1422
    }
1423
    if (r->sector_count == 0 && r->iov.iov_len == 0) {
1424
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
1425
    }
1426
    len = r->sector_count * 512 + r->iov.iov_len;
1427 1428
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        return -len;
P
pbrook 已提交
1429
    } else {
1430
        if (!r->sector_count) {
P
pbrook 已提交
1431
            r->sector_count = -1;
1432
        }
1433
        return len;
P
pbrook 已提交
1434 1435 1436
    }
}

J
Jan Kiszka 已提交
1437 1438 1439 1440 1441
static void scsi_disk_reset(DeviceState *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
    uint64_t nb_sectors;

1442
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
J
Jan Kiszka 已提交
1443

1444
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
P
Paolo Bonzini 已提交
1445
    nb_sectors /= s->qdev.blocksize / 512;
J
Jan Kiszka 已提交
1446 1447 1448
    if (nb_sectors) {
        nb_sectors--;
    }
P
Paolo Bonzini 已提交
1449
    s->qdev.max_lba = nb_sectors;
J
Jan Kiszka 已提交
1450 1451 1452 1453 1454 1455
}

static void scsi_destroy(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);

1456
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1457
    blockdev_mark_auto_del(s->qdev.conf.bs);
G
Gerd Hoffmann 已提交
1458 1459
}

1460
static void scsi_cd_change_media_cb(void *opaque, bool load)
1461
{
1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476
    SCSIDiskState *s = opaque;

    /*
     * When a CD gets changed, we have to report an ejected state and
     * then a loaded state to guests so that they detect tray
     * open/close and media change events.  Guests that do not use
     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
     * states rely on this behavior.
     *
     * media_changed governs the state machine used for unit attention
     * report.  media_event is used by GET EVENT STATUS NOTIFICATION.
     */
    s->media_changed = load;
    s->tray_open = !load;
    s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
1477
    s->media_event = true;
1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488
    s->eject_request = false;
}

static void scsi_cd_eject_request_cb(void *opaque, bool force)
{
    SCSIDiskState *s = opaque;

    s->eject_request = true;
    if (force) {
        s->tray_locked = false;
    }
1489 1490
}

1491 1492 1493 1494 1495
static bool scsi_cd_is_tray_open(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_open;
}

1496 1497 1498 1499 1500 1501
static bool scsi_cd_is_medium_locked(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_locked;
}

static const BlockDevOps scsi_cd_block_ops = {
1502
    .change_media_cb = scsi_cd_change_media_cb,
1503
    .eject_request_cb = scsi_cd_eject_request_cb,
1504
    .is_tray_open = scsi_cd_is_tray_open,
1505 1506 1507
    .is_medium_locked = scsi_cd_is_medium_locked,
};

1508 1509 1510 1511 1512 1513 1514 1515 1516
static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    if (s->media_changed) {
        s->media_changed = false;
        s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
    }
}

1517
static int scsi_initfn(SCSIDevice *dev)
P
pbrook 已提交
1518
{
1519
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1520
    DriveInfo *dinfo;
P
pbrook 已提交
1521

1522
    if (!s->qdev.conf.bs) {
1523
        error_report("scsi-disk: drive property not set");
1524 1525 1526
        return -1;
    }

1527
    if (!s->removable && !bdrv_is_inserted(s->qdev.conf.bs)) {
1528 1529 1530 1531
        error_report("Device needs media, but drive is empty");
        return -1;
    }

1532
    if (!s->serial) {
1533
        /* try to fall back to value set with legacy -drive serial=... */
1534
        dinfo = drive_get_by_blockdev(s->qdev.conf.bs);
1535
        if (*dinfo->serial) {
1536
            s->serial = g_strdup(dinfo->serial);
1537
        }
1538 1539
    }

1540
    if (!s->version) {
1541
        s->version = g_strdup(QEMU_VERSION);
1542 1543
    }

1544
    if (bdrv_is_sg(s->qdev.conf.bs)) {
1545
        error_report("scsi-disk: unwanted /dev/sg*");
1546 1547 1548
        return -1;
    }

1549
    if (s->removable) {
1550
        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
P
pbrook 已提交
1551
    }
1552
    bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
1553

1554
    bdrv_iostatus_enable(s->qdev.conf.bs);
P
Paolo Bonzini 已提交
1555
    add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
1556 1557 1558
    return 0;
}

1559 1560
static int scsi_hd_initfn(SCSIDevice *dev)
{
1561 1562 1563 1564
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = s->qdev.conf.logical_block_size;
    s->qdev.type = TYPE_DISK;
    return scsi_initfn(&s->qdev);
1565 1566 1567 1568
}

static int scsi_cd_initfn(SCSIDevice *dev)
{
1569 1570 1571 1572 1573
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = 2048;
    s->qdev.type = TYPE_ROM;
    s->removable = true;
    return scsi_initfn(&s->qdev);
1574 1575 1576 1577
}

static int scsi_disk_initfn(SCSIDevice *dev)
{
1578
    DriveInfo *dinfo;
1579 1580

    if (!dev->conf.bs) {
1581
        return scsi_initfn(dev);  /* ... and die there */
1582 1583
    }

1584 1585 1586 1587 1588 1589
    dinfo = drive_get_by_blockdev(dev->conf.bs);
    if (dinfo->media_cd) {
        return scsi_cd_initfn(dev);
    } else {
        return scsi_hd_initfn(dev);
    }
1590 1591
}

P
Paolo Bonzini 已提交
1592
static const SCSIReqOps scsi_disk_reqops = {
P
Paolo Bonzini 已提交
1593
    .size         = sizeof(SCSIDiskReq),
1594 1595 1596 1597 1598 1599
    .free_req     = scsi_free_request,
    .send_command = scsi_send_command,
    .read_data    = scsi_read_data,
    .write_data   = scsi_write_data,
    .cancel_io    = scsi_cancel_io,
    .get_buf      = scsi_get_buf,
P
Paolo Bonzini 已提交
1600 1601
};

P
Paolo Bonzini 已提交
1602 1603
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
                                     uint8_t *buf, void *hba_private)
P
Paolo Bonzini 已提交
1604 1605 1606 1607 1608 1609 1610 1611
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
    SCSIRequest *req;

    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
    return req;
}

1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710
#ifdef __linux__
static int get_device_type(SCSIDiskState *s)
{
    BlockDriverState *bdrv = s->qdev.conf.bs;
    uint8_t cmd[16];
    uint8_t buf[36];
    uint8_t sensebuf[8];
    sg_io_hdr_t io_header;
    int ret;

    memset(cmd, 0, sizeof(cmd));
    memset(buf, 0, sizeof(buf));
    cmd[0] = INQUIRY;
    cmd[4] = sizeof(buf);

    memset(&io_header, 0, sizeof(io_header));
    io_header.interface_id = 'S';
    io_header.dxfer_direction = SG_DXFER_FROM_DEV;
    io_header.dxfer_len = sizeof(buf);
    io_header.dxferp = buf;
    io_header.cmdp = cmd;
    io_header.cmd_len = sizeof(cmd);
    io_header.mx_sb_len = sizeof(sensebuf);
    io_header.sbp = sensebuf;
    io_header.timeout = 6000; /* XXX */

    ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
    if (ret < 0 || io_header.driver_status || io_header.host_status) {
        return -1;
    }
    s->qdev.type = buf[0];
    s->removable = (buf[1] & 0x80) != 0;
    return 0;
}

static int scsi_block_initfn(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    int sg_version;
    int rc;

    if (!s->qdev.conf.bs) {
        error_report("scsi-block: drive property not set");
        return -1;
    }

    /* check we are using a driver managing SG_IO (version 3 and after) */
    if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
        sg_version < 30000) {
        error_report("scsi-block: scsi generic interface too old");
        return -1;
    }

    /* get device type from INQUIRY data */
    rc = get_device_type(s);
    if (rc < 0) {
        error_report("scsi-block: INQUIRY failed");
        return -1;
    }

    /* Make a guess for the block size, we'll fix it when the guest sends.
     * READ CAPACITY.  If they don't, they likely would assume these sizes
     * anyway. (TODO: check in /sys).
     */
    if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
        s->qdev.blocksize = 2048;
    } else {
        s->qdev.blocksize = 512;
    }
    return scsi_initfn(&s->qdev);
}

static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
                                           uint32_t lun, uint8_t *buf,
                                           void *hba_private)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);

    switch (buf[0]) {
    case READ_6:
    case READ_10:
    case READ_12:
    case READ_16:
    case WRITE_6:
    case WRITE_10:
    case WRITE_12:
    case WRITE_16:
    case WRITE_VERIFY_10:
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
        return scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun,
                              hba_private);
    }

    return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
                          hba_private);
}
#endif

1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724
#define DEFINE_SCSI_DISK_PROPERTIES()                           \
    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)

static SCSIDeviceInfo scsi_disk_info[] = {
    {
        .qdev.name    = "scsi-hd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_hd_initfn,
        .destroy      = scsi_destroy,
1725
        .alloc_req    = scsi_new_request,
1726
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    },{
        .qdev.name    = "scsi-cd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI CD-ROM",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_cd_initfn,
        .destroy      = scsi_destroy,
1740
        .alloc_req    = scsi_new_request,
1741
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1742 1743 1744 1745
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760
#ifdef __linux__
    },{
        .qdev.name    = "scsi-block",
        .qdev.fw_name = "disk",
        .qdev.desc    = "SCSI block device passthrough",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_block_initfn,
        .destroy      = scsi_destroy,
        .alloc_req    = scsi_block_new_request,
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
#endif
1761 1762 1763 1764 1765 1766 1767 1768
    },{
        .qdev.name    = "scsi-disk", /* legacy -device scsi-disk */
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk or CD-ROM (legacy)",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_disk_initfn,
        .destroy      = scsi_destroy,
1769
        .alloc_req    = scsi_new_request,
1770
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1771 1772 1773 1774 1775 1776
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    }
1777 1778 1779 1780
};

static void scsi_disk_register_devices(void)
{
1781 1782 1783 1784 1785
    int i;

    for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
        scsi_qdev_register(&scsi_disk_info[i]);
    }
T
ths 已提交
1786
}
1787
device_init(scsi_disk_register_devices)