scsi-disk.c 52.9 KB
Newer Older
P
pbrook 已提交
1 2 3 4 5 6 7
/*
 * SCSI Device emulation
 *
 * Copyright (c) 2006 CodeSourcery.
 * Based on code by Fabrice Bellard
 *
 * Written by Paul Brook
8 9 10 11 12 13
 * Modifications:
 *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
 *                                 when the allocation length of CDB is smaller
 *                                 than 36.
 *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
 *                                 MODE SENSE response.
P
pbrook 已提交
14
 *
M
Matthew Fernandez 已提交
15
 * This code is licensed under the LGPL.
P
pbrook 已提交
16 17
 *
 * Note that this file only handles the SCSI architecture model and device
18 19
 * commands.  Emulation of interface/link layer protocols is handled by
 * the host adapter emulator.
P
pbrook 已提交
20 21 22 23 24
 */

//#define DEBUG_SCSI

#ifdef DEBUG_SCSI
25 26
#define DPRINTF(fmt, ...) \
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
27
#else
28
#define DPRINTF(fmt, ...) do {} while(0)
P
pbrook 已提交
29 30
#endif

31 32
#define BADF(fmt, ...) \
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
P
pbrook 已提交
33

P
pbrook 已提交
34
#include "qemu-common.h"
35
#include "qemu-error.h"
G
Gerd Hoffmann 已提交
36
#include "scsi.h"
G
Gerd Hoffmann 已提交
37
#include "scsi-defs.h"
38
#include "sysemu.h"
B
Blue Swirl 已提交
39
#include "blockdev.h"
40
#include "block_int.h"
41

42 43 44 45
#ifdef __linux
#include <scsi/sg.h>
#endif

46
#define SCSI_DMA_BUF_SIZE    131072
47
#define SCSI_MAX_INQUIRY_LEN 256
P
pbrook 已提交
48

49 50
typedef struct SCSIDiskState SCSIDiskState;

51 52
typedef struct SCSIDiskReq {
    SCSIRequest req;
P
pbrook 已提交
53
    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
54 55
    uint64_t sector;
    uint32_t sector_count;
56
    uint32_t buflen;
57 58
    struct iovec iov;
    QEMUIOVector qiov;
59
    BlockAcctCookie acct;
60
} SCSIDiskReq;
P
pbrook 已提交
61

62
struct SCSIDiskState
P
pbrook 已提交
63
{
64
    SCSIDevice qdev;
65
    uint32_t removable;
66
    bool media_changed;
67
    bool media_event;
68
    bool eject_request;
69
    QEMUBH *bh;
G
Gerd Hoffmann 已提交
70
    char *version;
71
    char *serial;
72
    bool tray_open;
73
    bool tray_locked;
P
pbrook 已提交
74 75
};

76
static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
K
Kevin Wolf 已提交
77

P
Paolo Bonzini 已提交
78
static void scsi_free_request(SCSIRequest *req)
P
pbrook 已提交
79
{
P
Paolo Bonzini 已提交
80 81
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

82 83 84
    if (r->iov.iov_base) {
        qemu_vfree(r->iov.iov_base);
    }
P
pbrook 已提交
85 86
}

87 88
/* Helper function for command completion with sense.  */
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
G
Gerd Hoffmann 已提交
89
{
B
Blue Swirl 已提交
90 91
    DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
            r->req.tag, sense.key, sense.asc, sense.ascq);
92 93
    scsi_req_build_sense(&r->req, sense);
    scsi_req_complete(&r->req, CHECK_CONDITION);
P
pbrook 已提交
94 95 96
}

/* Cancel a pending data transfer.  */
97
static void scsi_cancel_io(SCSIRequest *req)
P
pbrook 已提交
98
{
99 100 101 102 103
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);

    DPRINTF("Cancel tag=0x%x\n", req->tag);
    if (r->req.aiocb) {
        bdrv_aio_cancel(r->req.aiocb);
104 105 106 107 108

        /* This reference was left in by scsi_*_data.  We take ownership of
         * it the moment scsi_req_cancel is called, independent of whether
         * bdrv_aio_cancel completes the request or not.  */
        scsi_req_unref(&r->req);
P
pbrook 已提交
109
    }
110
    r->req.aiocb = NULL;
P
pbrook 已提交
111 112
}

113 114
static uint32_t scsi_init_iovec(SCSIDiskReq *r)
{
115 116 117 118
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (!r->iov.iov_base) {
        r->buflen = SCSI_DMA_BUF_SIZE;
119
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
120 121
    }
    r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
122 123 124 125
    qemu_iovec_init_external(&r->qiov, &r->iov, 1);
    return r->qiov.size / 512;
}

P
pbrook 已提交
126 127
static void scsi_read_complete(void * opaque, int ret)
{
128
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
129
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
K
Kevin Wolf 已提交
130
    int n;
P
pbrook 已提交
131

P
Paolo Bonzini 已提交
132 133
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
134
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
135
    }
136

P
pbrook 已提交
137
    if (ret) {
138
        if (scsi_handle_rw_error(r, -ret)) {
139
            goto done;
K
Kevin Wolf 已提交
140
        }
P
pbrook 已提交
141
    }
K
Kevin Wolf 已提交
142

143
    DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
P
pbrook 已提交
144

145
    n = r->qiov.size / 512;
K
Kevin Wolf 已提交
146 147
    r->sector += n;
    r->sector_count -= n;
148
    scsi_req_data(&r->req, r->qiov.size);
149 150 151 152 153

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
154 155
}

156 157 158 159 160 161 162
static void scsi_flush_complete(void * opaque, int ret)
{
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);

    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
163
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
164 165 166
    }

    if (ret < 0) {
167
        if (scsi_handle_rw_error(r, -ret)) {
168
            goto done;
169 170 171 172
        }
    }

    scsi_req_complete(&r->req, GOOD);
173 174 175 176 177

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
178
}
K
Kevin Wolf 已提交
179

180 181
/* Read more data from scsi device into buffer.  */
static void scsi_read_data(SCSIRequest *req)
P
pbrook 已提交
182
{
183
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
K
Kevin Wolf 已提交
184
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
P
pbrook 已提交
185 186
    uint32_t n;

P
pbrook 已提交
187
    if (r->sector_count == (uint32_t)-1) {
188
        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
P
pbrook 已提交
189
        r->sector_count = 0;
P
Paolo Bonzini 已提交
190
        scsi_req_data(&r->req, r->iov.iov_len);
P
pbrook 已提交
191
        return;
P
pbrook 已提交
192
    }
P
pbrook 已提交
193 194
    DPRINTF("Read sector_count=%d\n", r->sector_count);
    if (r->sector_count == 0) {
195 196
        /* This also clears the sense buffer for REQUEST SENSE.  */
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
197
        return;
P
pbrook 已提交
198 199
    }

200 201 202
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

203 204
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
205 206 207 208 209 210
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_read_complete(r, -EINVAL);
        return;
    }

211 212
    if (s->tray_open) {
        scsi_read_complete(r, -ENOMEDIUM);
213
        return;
214
    }
215

216
    n = scsi_init_iovec(r);
217 218
    bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
    r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
219
                              scsi_read_complete, r);
220 221 222
    if (r->req.aiocb == NULL) {
        scsi_read_complete(r, -EIO);
    }
P
pbrook 已提交
223 224
}

225 226 227 228 229 230 231
/*
 * scsi_handle_rw_error has two return values.  0 means that the error
 * must be ignored, 1 means that the error has been processed and the
 * caller should not do anything else for this request.  Note that
 * scsi_handle_rw_error always manages its reference counts, independent
 * of the return value.
 */
232
static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
K
Kevin Wolf 已提交
233
{
234
    int is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
235
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
236
    BlockErrorAction action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
237

238
    if (action == BLOCK_ERR_IGNORE) {
239
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
240
        return 0;
241
    }
242 243 244

    if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
            || action == BLOCK_ERR_STOP_ANY) {
K
Kevin Wolf 已提交
245

246
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
247
        vm_stop(RUN_STATE_IO_ERROR);
248
        bdrv_iostatus_set_err(s->qdev.conf.bs, error);
249
        scsi_req_retry(&r->req);
250
    } else {
251
        switch (error) {
252 253 254
        case ENOMEDIUM:
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            break;
255
        case ENOMEM:
256
            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
257 258
            break;
        case EINVAL:
259
            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
260 261
            break;
        default:
262
            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
263
            break;
264
        }
265
        bdrv_mon_event(s->qdev.conf.bs, BDRV_ACTION_REPORT, is_read);
266 267 268 269
    }
    return 1;
}

P
pbrook 已提交
270 271
static void scsi_write_complete(void * opaque, int ret)
{
272
    SCSIDiskReq *r = (SCSIDiskReq *)opaque;
273
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
274 275
    uint32_t n;

P
Paolo Bonzini 已提交
276 277
    if (r->req.aiocb != NULL) {
        r->req.aiocb = NULL;
278
        bdrv_acct_done(s->qdev.conf.bs, &r->acct);
P
Paolo Bonzini 已提交
279
    }
280

P
pbrook 已提交
281
    if (ret) {
282
        if (scsi_handle_rw_error(r, -ret)) {
283
            goto done;
K
Kevin Wolf 已提交
284
        }
P
pbrook 已提交
285 286
    }

287
    n = r->qiov.size / 512;
288 289
    r->sector += n;
    r->sector_count -= n;
P
pbrook 已提交
290
    if (r->sector_count == 0) {
291
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
292
    } else {
293 294 295
        scsi_init_iovec(r);
        DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, r->qiov.size);
        scsi_req_data(&r->req, r->qiov.size);
P
pbrook 已提交
296
    }
297 298 299 300 301

done:
    if (!r->req.io_canceled) {
        scsi_req_unref(&r->req);
    }
P
pbrook 已提交
302 303
}

304
static void scsi_write_data(SCSIRequest *req)
305
{
306
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
307
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
308 309
    uint32_t n;

310 311 312
    /* No data transfer may already be in progress */
    assert(r->req.aiocb == NULL);

313 314
    /* The request is used as the AIO opaque value, so add a ref.  */
    scsi_req_ref(&r->req);
315 316 317
    if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
        DPRINTF("Data transfer direction invalid\n");
        scsi_write_complete(r, -EINVAL);
318
        return;
319 320
    }

321
    n = r->qiov.size / 512;
322
    if (n) {
323 324
        if (s->tray_open) {
            scsi_write_complete(r, -ENOMEDIUM);
325
            return;
326
        }
327 328
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
        r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
329
                                       scsi_write_complete, r);
330
        if (r->req.aiocb == NULL) {
331
            scsi_write_complete(r, -ENOMEM);
332
        }
333
    } else {
334
        /* Called for the first time.  Ask the driver to send us more data.  */
335 336
        scsi_write_complete(r, 0);
    }
P
pbrook 已提交
337
}
P
pbrook 已提交
338

P
pbrook 已提交
339
/* Return a pointer to the data buffer.  */
340
static uint8_t *scsi_get_buf(SCSIRequest *req)
P
pbrook 已提交
341
{
342
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
P
pbrook 已提交
343

344
    return (uint8_t *)r->iov.iov_base;
P
pbrook 已提交
345 346
}

347 348
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
{
G
Gerd Hoffmann 已提交
349
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366
    int buflen = 0;

    if (req->cmd.buf[1] & 0x2) {
        /* Command support data - optional, not implemented */
        BADF("optional INQUIRY command support request not implemented\n");
        return -1;
    }

    if (req->cmd.buf[1] & 0x1) {
        /* Vital product data */
        uint8_t page_code = req->cmd.buf[2];
        if (req->cmd.xfer < 4) {
            BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
                 "less than 4\n", page_code, req->cmd.xfer);
            return -1;
        }

367
        outbuf[buflen++] = s->qdev.type & 0x1f;
368 369 370 371 372
        outbuf[buflen++] = page_code ; // this page
        outbuf[buflen++] = 0x00;

        switch (page_code) {
        case 0x00: /* Supported page codes, mandatory */
H
Hannes Reinecke 已提交
373 374
        {
            int pages;
375 376
            DPRINTF("Inquiry EVPD[Supported pages] "
                    "buffer size %zd\n", req->cmd.xfer);
H
Hannes Reinecke 已提交
377
            pages = buflen++;
378
            outbuf[buflen++] = 0x00; // list of supported pages (this page)
379
            if (s->serial) {
380
                outbuf[buflen++] = 0x80; // unit serial number
381
            }
382
            outbuf[buflen++] = 0x83; // device identification
H
Hannes Reinecke 已提交
383
            if (s->qdev.type == TYPE_DISK) {
384 385
                outbuf[buflen++] = 0xb0; // block limits
                outbuf[buflen++] = 0xb2; // thin provisioning
H
Hannes Reinecke 已提交
386 387
            }
            outbuf[pages] = buflen - pages - 1; // number of pages
388
            break;
H
Hannes Reinecke 已提交
389
        }
390 391
        case 0x80: /* Device serial number, optional */
        {
392
            int l;
393

394 395 396 397 398 399
            if (!s->serial) {
                DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
                return -1;
            }

            l = strlen(s->serial);
400
            if (l > req->cmd.xfer) {
401
                l = req->cmd.xfer;
402 403
            }
            if (l > 20) {
404
                l = 20;
405
            }
406 407 408 409

            DPRINTF("Inquiry EVPD[Serial number] "
                    "buffer size %zd\n", req->cmd.xfer);
            outbuf[buflen++] = l;
410
            memcpy(outbuf+buflen, s->serial, l);
411 412 413 414 415 416 417
            buflen += l;
            break;
        }

        case 0x83: /* Device identification page, mandatory */
        {
            int max_len = 255 - 8;
418
            int id_len = strlen(bdrv_get_device_name(s->qdev.conf.bs));
419

420
            if (id_len > max_len) {
421
                id_len = max_len;
422
            }
423 424 425
            DPRINTF("Inquiry EVPD[Device identification] "
                    "buffer size %zd\n", req->cmd.xfer);

H
Hannes Reinecke 已提交
426
            outbuf[buflen++] = 4 + id_len;
427 428 429 430 431
            outbuf[buflen++] = 0x2; // ASCII
            outbuf[buflen++] = 0;   // not officially assigned
            outbuf[buflen++] = 0;   // reserved
            outbuf[buflen++] = id_len; // length of data following

432
            memcpy(outbuf+buflen, bdrv_get_device_name(s->qdev.conf.bs), id_len);
433 434 435
            buflen += id_len;
            break;
        }
436
        case 0xb0: /* block limits */
C
Christoph Hellwig 已提交
437
        {
438 439
            unsigned int unmap_sectors =
                    s->qdev.conf.discard_granularity / s->qdev.blocksize;
440 441 442 443
            unsigned int min_io_size =
                    s->qdev.conf.min_io_size / s->qdev.blocksize;
            unsigned int opt_io_size =
                    s->qdev.conf.opt_io_size / s->qdev.blocksize;
C
Christoph Hellwig 已提交
444

H
Hannes Reinecke 已提交
445
            if (s->qdev.type == TYPE_ROM) {
H
Hannes Reinecke 已提交
446 447 448 449
                DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                        page_code);
                return -1;
            }
C
Christoph Hellwig 已提交
450 451 452 453 454 455 456 457 458 459 460 461 462 463
            /* required VPD size with unmap support */
            outbuf[3] = buflen = 0x3c;

            memset(outbuf + 4, 0, buflen - 4);

            /* optimal transfer length granularity */
            outbuf[6] = (min_io_size >> 8) & 0xff;
            outbuf[7] = min_io_size & 0xff;

            /* optimal transfer length */
            outbuf[12] = (opt_io_size >> 24) & 0xff;
            outbuf[13] = (opt_io_size >> 16) & 0xff;
            outbuf[14] = (opt_io_size >> 8) & 0xff;
            outbuf[15] = opt_io_size & 0xff;
464 465 466 467 468 469 470 471 472 473 474 475 476 477 478

            /* optimal unmap granularity */
            outbuf[28] = (unmap_sectors >> 24) & 0xff;
            outbuf[29] = (unmap_sectors >> 16) & 0xff;
            outbuf[30] = (unmap_sectors >> 8) & 0xff;
            outbuf[31] = unmap_sectors & 0xff;
            break;
        }
        case 0xb2: /* thin provisioning */
        {
            outbuf[3] = buflen = 8;
            outbuf[4] = 0;
            outbuf[5] = 0x40; /* write same with unmap supported */
            outbuf[6] = 0;
            outbuf[7] = 0;
C
Christoph Hellwig 已提交
479 480
            break;
        }
481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504
        default:
            BADF("Error: unsupported Inquiry (EVPD[%02X]) "
                 "buffer size %zd\n", page_code, req->cmd.xfer);
            return -1;
        }
        /* done with EVPD */
        return buflen;
    }

    /* Standard INQUIRY data */
    if (req->cmd.buf[2] != 0) {
        BADF("Error: Inquiry (STANDARD) page or code "
             "is non-zero [%02X]\n", req->cmd.buf[2]);
        return -1;
    }

    /* PAGE CODE == 0 */
    if (req->cmd.xfer < 5) {
        BADF("Error: Inquiry (STANDARD) buffer size %zd "
             "is less than 5\n", req->cmd.xfer);
        return -1;
    }

    buflen = req->cmd.xfer;
505
    if (buflen > SCSI_MAX_INQUIRY_LEN) {
506
        buflen = SCSI_MAX_INQUIRY_LEN;
507
    }
508 509
    memset(outbuf, 0, buflen);

H
Hannes Reinecke 已提交
510
    outbuf[0] = s->qdev.type & 0x1f;
511
    outbuf[1] = s->removable ? 0x80 : 0;
H
Hannes Reinecke 已提交
512
    if (s->qdev.type == TYPE_ROM) {
L
Laszlo Ast 已提交
513
        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
514
    } else {
L
Laszlo Ast 已提交
515
        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
516
    }
L
Laszlo Ast 已提交
517
    memcpy(&outbuf[8], "QEMU    ", 8);
G
Gerd Hoffmann 已提交
518
    memset(&outbuf[32], 0, 4);
519
    memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
520 521 522 523 524 525
    /*
     * We claim conformance to SPC-3, which is required for guests
     * to ask for modern features like READ CAPACITY(16) or the
     * block characteristics VPD page by default.  Not all of SPC-3
     * is actually implemented, but we're good enough.
     */
C
Christoph Hellwig 已提交
526
    outbuf[2] = 5;
527
    outbuf[3] = 2; /* Format 2 */
528 529 530 531 532 533 534 535 536

    if (buflen > 36) {
        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
    } else {
        /* If the allocation length of CDB is too small,
               the additional length is not adjusted */
        outbuf[4] = 36 - 5;
    }

537
    /* Sync data transfer and TCQ.  */
538
    outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
539 540 541
    return buflen;
}

542 543 544 545 546 547
static inline bool media_is_dvd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
548
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
549 550
        return false;
    }
551
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
552 553 554
    return nb_sectors > CD_MAX_SECTORS;
}

555 556 557 558 559 560
static inline bool media_is_cd(SCSIDiskState *s)
{
    uint64_t nb_sectors;
    if (s->qdev.type != TYPE_ROM) {
        return false;
    }
561
    if (!bdrv_is_inserted(s->qdev.conf.bs)) {
562 563
        return false;
    }
564
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
565 566 567
    return nb_sectors <= CD_MAX_SECTORS;
}

568 569 570
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
                                   uint8_t *outbuf)
{
571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591
    static const int rds_caps_size[5] = {
        [0] = 2048 + 4,
        [1] = 4 + 4,
        [3] = 188 + 4,
        [4] = 2048 + 4,
    };

    uint8_t media = r->req.cmd.buf[1];
    uint8_t layer = r->req.cmd.buf[6];
    uint8_t format = r->req.cmd.buf[7];
    int size = -1;

    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if (media != 0) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
        return -1;
    }

    if (format != 0xff) {
592
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613
            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
            return -1;
        }
        if (media_is_cd(s)) {
            scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
            return -1;
        }
        if (format >= ARRAY_SIZE(rds_caps_size)) {
            return -1;
        }
        size = rds_caps_size[format];
        memset(outbuf, 0, size);
    }

    switch (format) {
    case 0x00: {
        /* Physical format information */
        uint64_t nb_sectors;
        if (layer != 0) {
            goto fail;
        }
614
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658

        outbuf[4] = 1;   /* DVD-ROM, part version 1 */
        outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
        outbuf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
        outbuf[7] = 0;   /* default densities */

        stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
        stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
        break;
    }

    case 0x01: /* DVD copyright information, all zeros */
        break;

    case 0x03: /* BCA information - invalid field for no BCA info */
        return -1;

    case 0x04: /* DVD disc manufacturing information, all zeros */
        break;

    case 0xff: { /* List capabilities */
        int i;
        size = 4;
        for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
            if (!rds_caps_size[i]) {
                continue;
            }
            outbuf[size] = i;
            outbuf[size + 1] = 0x40; /* Not writable, readable */
            stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
            size += 4;
        }
        break;
     }

    default:
        return -1;
    }

    /* Size of buffer, not including 2 byte size field */
    stw_be_p(outbuf, size - 2);
    return size;

fail:
659 660 661
    return -1;
}

662
static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
663
{
664 665 666 667 668
    uint8_t event_code, media_status;

    media_status = 0;
    if (s->tray_open) {
        media_status = MS_TRAY_OPEN;
669
    } else if (bdrv_is_inserted(s->qdev.conf.bs)) {
670 671 672 673 674
        media_status = MS_MEDIA_PRESENT;
    }

    /* Event notification descriptor */
    event_code = MEC_NO_CHANGE;
675 676 677 678 679 680 681 682
    if (media_status != MS_TRAY_OPEN) {
        if (s->media_event) {
            event_code = MEC_NEW_MEDIA;
            s->media_event = false;
        } else if (s->eject_request) {
            event_code = MEC_EJECT_REQUESTED;
            s->eject_request = false;
        }
683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
    }

    outbuf[0] = event_code;
    outbuf[1] = media_status;

    /* These fields are reserved, just clear them. */
    outbuf[2] = 0;
    outbuf[3] = 0;
    return 4;
}

static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
                                              uint8_t *outbuf)
{
    int size;
    uint8_t *buf = r->req.cmd.buf;
    uint8_t notification_class_request = buf[4];
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    if ((buf[1] & 1) == 0) {
        /* asynchronous */
        return -1;
    }

    size = 4;
    outbuf[0] = outbuf[1] = 0;
    outbuf[3] = 1 << GESN_MEDIA; /* supported events */
    if (notification_class_request & (1 << GESN_MEDIA)) {
        outbuf[2] = GESN_MEDIA;
        size += scsi_event_status_media(s, &outbuf[size]);
    } else {
        outbuf[2] = 0x80;
    }
    stw_be_p(outbuf, size - 4);
    return size;
719 720
}

721
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
722
{
723 724
    int current;

725 726 727
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752
    current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
    memset(outbuf, 0, 40);
    stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
    stw_be_p(&outbuf[6], current);
    /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
    outbuf[10] = 0x03; /* persistent, current */
    outbuf[11] = 8; /* two profiles */
    stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
    outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
    stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
    outbuf[18] = (current == MMC_PROFILE_CD_ROM);
    /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
    stw_be_p(&outbuf[20], 1);
    outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[23] = 8;
    stl_be_p(&outbuf[24], 1); /* SCSI */
    outbuf[28] = 1; /* DBE = 1, mandatory */
    /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
    stw_be_p(&outbuf[32], 3);
    outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
    outbuf[35] = 4;
    outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
    /* TODO: Random readable, CD read, DVD read, drive serial number,
       power management */
    return 40;
753 754 755 756 757 758 759 760 761 762 763 764
}

static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
{
    if (s->qdev.type != TYPE_ROM) {
        return -1;
    }
    memset(outbuf, 0, 8);
    outbuf[5] = 1; /* CD-ROM */
    return 8;
}

765
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
766
                           int page_control)
767
{
768 769 770 771
    static const int mode_sense_valid[0x3f] = {
        [MODE_PAGE_HD_GEOMETRY]            = (1 << TYPE_DISK),
        [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
        [MODE_PAGE_CACHING]                = (1 << TYPE_DISK) | (1 << TYPE_ROM),
772 773
        [MODE_PAGE_R_W_ERROR]              = (1 << TYPE_DISK) | (1 << TYPE_ROM),
        [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
774 775 776
        [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
    };

777
    BlockDriverState *bdrv = s->qdev.conf.bs;
778
    int cylinders, heads, secs;
779
    uint8_t *p = *p_outbuf;
780

781 782 783 784 785 786
    if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
        return -1;
    }

    p[0] = page;

787 788 789 790 791 792
    /*
     * If Changeable Values are requested, a mask denoting those mode parameters
     * that are changeable shall be returned. As we currently don't support
     * parameter changes via MODE_SELECT all bits are returned set to zero.
     * The buffer was already menset to zero by the caller of this function.
     */
793
    switch (page) {
794
    case MODE_PAGE_HD_GEOMETRY:
795
        p[1] = 0x16;
796
        if (page_control == 1) { /* Changeable Values */
797
            break;
798
        }
799
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
800
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822
        p[2] = (cylinders >> 16) & 0xff;
        p[3] = (cylinders >> 8) & 0xff;
        p[4] = cylinders & 0xff;
        p[5] = heads & 0xff;
        /* Write precomp start cylinder, disabled */
        p[6] = (cylinders >> 16) & 0xff;
        p[7] = (cylinders >> 8) & 0xff;
        p[8] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[9] = (cylinders >> 16) & 0xff;
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Device step rate [ns], 200ns */
        p[12] = 0;
        p[13] = 200;
        /* Landing zone cylinder */
        p[14] = 0xff;
        p[15] =  0xff;
        p[16] = 0xff;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[20] = (5400 >> 8) & 0xff;
        p[21] = 5400 & 0xff;
823
        break;
824

825
    case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
826
        p[1] = 0x1e;
827
        if (page_control == 1) { /* Changeable Values */
828
            break;
829
        }
830 831 832 833
        /* Transfer rate [kbit/s], 5Mbit/s */
        p[2] = 5000 >> 8;
        p[3] = 5000 & 0xff;
        /* if a geometry hint is available, use it */
P
Paolo Bonzini 已提交
834
        bdrv_guess_geometry(bdrv, &cylinders, &heads, &secs);
835 836
        p[4] = heads & 0xff;
        p[5] = secs & 0xff;
P
Paolo Bonzini 已提交
837
        p[6] = s->qdev.blocksize >> 8;
838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860
        p[8] = (cylinders >> 8) & 0xff;
        p[9] = cylinders & 0xff;
        /* Write precomp start cylinder, disabled */
        p[10] = (cylinders >> 8) & 0xff;
        p[11] = cylinders & 0xff;
        /* Reduced current start cylinder, disabled */
        p[12] = (cylinders >> 8) & 0xff;
        p[13] = cylinders & 0xff;
        /* Device step rate [100us], 100us */
        p[14] = 0;
        p[15] = 1;
        /* Device step pulse width [us], 1us */
        p[16] = 1;
        /* Device head settle delay [100us], 100us */
        p[17] = 0;
        p[18] = 1;
        /* Motor on delay [0.1s], 0.1s */
        p[19] = 1;
        /* Motor off delay [0.1s], 0.1s */
        p[20] = 1;
        /* Medium rotation rate [rpm], 5400 rpm */
        p[28] = (5400 >> 8) & 0xff;
        p[29] = 5400 & 0xff;
861
        break;
862

863
    case MODE_PAGE_CACHING:
864 865
        p[0] = 8;
        p[1] = 0x12;
866
        if (page_control == 1) { /* Changeable Values */
867
            break;
868
        }
869
        if (bdrv_enable_write_cache(s->qdev.conf.bs)) {
870 871
            p[2] = 4; /* WCE */
        }
872
        break;
873

874 875 876 877 878 879 880 881 882 883 884 885
    case MODE_PAGE_R_W_ERROR:
        p[1] = 10;
        p[2] = 0x80; /* Automatic Write Reallocation Enabled */
        if (s->qdev.type == TYPE_ROM) {
            p[3] = 0x20; /* Read Retry Count */
        }
        break;

    case MODE_PAGE_AUDIO_CTL:
        p[1] = 14;
        break;

886
    case MODE_PAGE_CAPABILITIES:
887
        p[1] = 0x14;
888
        if (page_control == 1) { /* Changeable Values */
889
            break;
890
        }
891 892 893

        p[2] = 0x3b; /* CD-R & CD-RW read */
        p[3] = 0; /* Writing not supported */
894 895 896 897 898
        p[4] = 0x7f; /* Audio, composite, digital out,
                        mode 2 form 1&2, multi session */
        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
                        RW corrected, C2 errors, ISRC,
                        UPC, Bar code */
899
        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
900 901 902
        /* Locking supported, jumper present, eject, tray */
        p[7] = 0; /* no volume & mute control, no
                     changer */
903
        p[8] = (50 * 176) >> 8; /* 50x read speed */
904
        p[9] = (50 * 176) & 0xff;
905 906 907
        p[10] = 2 >> 8; /* Two volume levels */
        p[11] = 2 & 0xff;
        p[12] = 2048 >> 8; /* 2M buffer */
908
        p[13] = 2048 & 0xff;
909
        p[14] = (16 * 176) >> 8; /* 16x read speed current */
910
        p[15] = (16 * 176) & 0xff;
911
        p[18] = (16 * 176) >> 8; /* 16x write speed */
912
        p[19] = (16 * 176) & 0xff;
913
        p[20] = (16 * 176) >> 8; /* 16x write speed current */
914
        p[21] = (16 * 176) & 0xff;
915
        break;
916 917

    default:
918
        return -1;
919
    }
920 921 922

    *p_outbuf += p[1] + 2;
    return p[1] + 2;
923 924
}

925
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
926
{
927
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
928
    uint64_t nb_sectors;
929
    int page, dbd, buflen, ret, page_control;
930
    uint8_t *p;
931
    uint8_t dev_specific_param;
932

933 934 935
    dbd = r->req.cmd.buf[1]  & 0x8;
    page = r->req.cmd.buf[2] & 0x3f;
    page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
936
    DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
937 938
        (r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
    memset(outbuf, 0, r->req.cmd.xfer);
939 940
    p = outbuf;

941
    if (bdrv_is_read_only(s->qdev.conf.bs)) {
942 943 944 945 946
        dev_specific_param = 0x80; /* Readonly.  */
    } else {
        dev_specific_param = 0x00;
    }

947
    if (r->req.cmd.buf[0] == MODE_SENSE) {
948 949 950 951 952 953 954 955 956
        p[1] = 0; /* Default media type.  */
        p[2] = dev_specific_param;
        p[3] = 0; /* Block descriptor length.  */
        p += 4;
    } else { /* MODE_SENSE_10 */
        p[2] = 0; /* Default media type.  */
        p[3] = dev_specific_param;
        p[6] = p[7] = 0; /* Block descriptor length.  */
        p += 8;
957 958
    }

959
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
960
    if (!dbd && nb_sectors) {
961
        if (r->req.cmd.buf[0] == MODE_SENSE) {
962 963 964 965
            outbuf[3] = 8; /* Block descriptor length  */
        } else { /* MODE_SENSE_10 */
            outbuf[7] = 8; /* Block descriptor length  */
        }
P
Paolo Bonzini 已提交
966
        nb_sectors /= (s->qdev.blocksize / 512);
967
        if (nb_sectors > 0xffffff) {
968
            nb_sectors = 0;
969
        }
970 971 972 973 974 975
        p[0] = 0; /* media density code */
        p[1] = (nb_sectors >> 16) & 0xff;
        p[2] = (nb_sectors >> 8) & 0xff;
        p[3] = nb_sectors & 0xff;
        p[4] = 0; /* reserved */
        p[5] = 0; /* bytes 5-7 are the sector size in bytes */
P
Paolo Bonzini 已提交
976
        p[6] = s->qdev.blocksize >> 8;
977 978 979 980
        p[7] = 0;
        p += 8;
    }

981 982 983 984
    if (page_control == 3) {
        /* Saved Values */
        scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
        return -1;
985 986
    }

987 988 989 990 991 992 993 994 995
    if (page == 0x3f) {
        for (page = 0; page <= 0x3e; page++) {
            mode_sense_page(s, page, &p, page_control);
        }
    } else {
        ret = mode_sense_page(s, page, &p, page_control);
        if (ret == -1) {
            return -1;
        }
996 997 998
    }

    buflen = p - outbuf;
999 1000 1001 1002 1003
    /*
     * The mode data length field specifies the length in bytes of the
     * following data that is available to be transferred. The mode data
     * length does not include itself.
     */
1004
    if (r->req.cmd.buf[0] == MODE_SENSE) {
1005 1006 1007 1008 1009
        outbuf[0] = buflen - 1;
    } else { /* MODE_SENSE_10 */
        outbuf[0] = ((buflen - 2) >> 8) & 0xff;
        outbuf[1] = (buflen - 2) & 0xff;
    }
1010
    if (buflen > r->req.cmd.xfer) {
1011
        buflen = r->req.cmd.xfer;
1012
    }
1013 1014 1015
    return buflen;
}

1016 1017 1018 1019 1020 1021 1022 1023 1024
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    int start_track, format, msf, toclen;
    uint64_t nb_sectors;

    msf = req->cmd.buf[1] & 2;
    format = req->cmd.buf[2] & 0xf;
    start_track = req->cmd.buf[6];
1025
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1026
    DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
P
Paolo Bonzini 已提交
1027
    nb_sectors /= s->qdev.blocksize / 512;
1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045
    switch (format) {
    case 0:
        toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
        break;
    case 1:
        /* multi session : only a single session defined */
        toclen = 12;
        memset(outbuf, 0, 12);
        outbuf[1] = 0x0a;
        outbuf[2] = 0x01;
        outbuf[3] = 0x01;
        break;
    case 2:
        toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
        break;
    default:
        return -1;
    }
1046
    if (toclen > req->cmd.xfer) {
1047
        toclen = req->cmd.xfer;
1048
    }
1049 1050 1051
    return toclen;
}

1052
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
1053 1054 1055 1056 1057 1058 1059
{
    SCSIRequest *req = &r->req;
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    bool start = req->cmd.buf[4] & 1;
    bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */

    if (s->qdev.type == TYPE_ROM && loej) {
1060 1061
        if (!start && !s->tray_open && s->tray_locked) {
            scsi_check_condition(r,
1062
                                 bdrv_is_inserted(s->qdev.conf.bs)
1063 1064 1065
                                 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
                                 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
            return -1;
1066
        }
1067
        bdrv_eject(s->qdev.conf.bs, !start);
1068
        s->tray_open = !start;
1069
    }
1070
    return 0;
1071 1072
}

1073
static int scsi_disk_emulate_command(SCSIDiskReq *r)
1074
{
1075
    SCSIRequest *req = &r->req;
1076 1077
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
    uint64_t nb_sectors;
1078
    uint8_t *outbuf;
1079 1080
    int buflen = 0;

1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093
    if (!r->iov.iov_base) {
        /*
         * FIXME: we shouldn't return anything bigger than 4k, but the code
         * requires the buffer to be as big as req->cmd.xfer in several
         * places.  So, do not allow CDBs with a very large ALLOCATION
         * LENGTH.  The real fix would be to modify scsi_read_data and
         * dma_buf_read, so that they return data beyond the buflen
         * as all zeros.
         */
        if (req->cmd.xfer > 65536) {
            goto illegal_request;
        }
        r->buflen = MAX(4096, req->cmd.xfer);
1094
        r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
1095 1096 1097
    }

    outbuf = r->iov.iov_base;
1098 1099
    switch (req->cmd.buf[0]) {
    case TEST_UNIT_READY:
1100
        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1101
            goto not_ready;
1102
        }
H
Hannes Reinecke 已提交
1103
        break;
1104 1105
    case INQUIRY:
        buflen = scsi_disk_emulate_inquiry(req, outbuf);
1106
        if (buflen < 0) {
1107
            goto illegal_request;
1108
        }
H
Hannes Reinecke 已提交
1109
        break;
1110 1111
    case MODE_SENSE:
    case MODE_SENSE_10:
1112
        buflen = scsi_disk_emulate_mode_sense(r, outbuf);
1113
        if (buflen < 0) {
1114
            goto illegal_request;
1115
        }
1116
        break;
1117 1118
    case READ_TOC:
        buflen = scsi_disk_emulate_read_toc(req, outbuf);
1119
        if (buflen < 0) {
1120
            goto illegal_request;
1121
        }
1122
        break;
1123
    case RESERVE:
1124
        if (req->cmd.buf[1] & 1) {
1125
            goto illegal_request;
1126
        }
1127 1128
        break;
    case RESERVE_10:
1129
        if (req->cmd.buf[1] & 3) {
1130
            goto illegal_request;
1131
        }
1132 1133
        break;
    case RELEASE:
1134
        if (req->cmd.buf[1] & 1) {
1135
            goto illegal_request;
1136
        }
1137 1138
        break;
    case RELEASE_10:
1139
        if (req->cmd.buf[1] & 3) {
1140
            goto illegal_request;
1141
        }
1142
        break;
1143
    case START_STOP:
1144 1145 1146
        if (scsi_disk_emulate_start_stop(r) < 0) {
            return -1;
        }
H
Hannes Reinecke 已提交
1147
        break;
1148
    case ALLOW_MEDIUM_REMOVAL:
1149
        s->tray_locked = req->cmd.buf[4] & 1;
1150
        bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
H
Hannes Reinecke 已提交
1151
        break;
1152
    case READ_CAPACITY_10:
1153
        /* The normal LEN field for this command is zero.  */
H
Hannes Reinecke 已提交
1154
        memset(outbuf, 0, 8);
1155
        bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1156
        if (!nb_sectors) {
1157
            goto not_ready;
1158
        }
1159 1160 1161
        if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
            goto illegal_request;
        }
P
Paolo Bonzini 已提交
1162
        nb_sectors /= s->qdev.blocksize / 512;
1163 1164 1165
        /* Returned value is the address of the last sector.  */
        nb_sectors--;
        /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1166
        s->qdev.max_lba = nb_sectors;
1167
        /* Clip to 2TB, instead of returning capacity modulo 2TB. */
1168
        if (nb_sectors > UINT32_MAX) {
1169
            nb_sectors = UINT32_MAX;
1170
        }
1171 1172 1173 1174 1175 1176
        outbuf[0] = (nb_sectors >> 24) & 0xff;
        outbuf[1] = (nb_sectors >> 16) & 0xff;
        outbuf[2] = (nb_sectors >> 8) & 0xff;
        outbuf[3] = nb_sectors & 0xff;
        outbuf[4] = 0;
        outbuf[5] = 0;
P
Paolo Bonzini 已提交
1177
        outbuf[6] = s->qdev.blocksize >> 8;
1178 1179
        outbuf[7] = 0;
        buflen = 8;
H
Hannes Reinecke 已提交
1180
        break;
1181 1182 1183 1184 1185 1186
    case MECHANISM_STATUS:
        buflen = scsi_emulate_mechanism_status(s, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
1187
    case GET_CONFIGURATION:
1188
        buflen = scsi_get_configuration(s, outbuf);
1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case GET_EVENT_STATUS_NOTIFICATION:
        buflen = scsi_get_event_status_notification(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
        break;
    case READ_DVD_STRUCTURE:
        buflen = scsi_read_dvd_structure(s, r, outbuf);
        if (buflen < 0) {
            goto illegal_request;
        }
1204
        break;
1205
    case SERVICE_ACTION_IN_16:
1206
        /* Service Action In subcommands. */
1207
        if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
1208 1209
            DPRINTF("SAI READ CAPACITY(16)\n");
            memset(outbuf, 0, req->cmd.xfer);
1210
            bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
1211
            if (!nb_sectors) {
1212
                goto not_ready;
1213
            }
1214 1215 1216
            if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
                goto illegal_request;
            }
P
Paolo Bonzini 已提交
1217
            nb_sectors /= s->qdev.blocksize / 512;
1218 1219 1220
            /* Returned value is the address of the last sector.  */
            nb_sectors--;
            /* Remember the new size for read/write sanity checking. */
P
Paolo Bonzini 已提交
1221
            s->qdev.max_lba = nb_sectors;
1222 1223 1224 1225 1226 1227 1228 1229 1230 1231
            outbuf[0] = (nb_sectors >> 56) & 0xff;
            outbuf[1] = (nb_sectors >> 48) & 0xff;
            outbuf[2] = (nb_sectors >> 40) & 0xff;
            outbuf[3] = (nb_sectors >> 32) & 0xff;
            outbuf[4] = (nb_sectors >> 24) & 0xff;
            outbuf[5] = (nb_sectors >> 16) & 0xff;
            outbuf[6] = (nb_sectors >> 8) & 0xff;
            outbuf[7] = nb_sectors & 0xff;
            outbuf[8] = 0;
            outbuf[9] = 0;
P
Paolo Bonzini 已提交
1232
            outbuf[10] = s->qdev.blocksize >> 8;
1233
            outbuf[11] = 0;
C
Christoph Hellwig 已提交
1234 1235
            outbuf[12] = 0;
            outbuf[13] = get_physical_block_exp(&s->qdev.conf);
1236 1237 1238 1239 1240 1241

            /* set TPE bit if the format supports discard */
            if (s->qdev.conf.discard_granularity) {
                outbuf[14] = 0x80;
            }

1242 1243 1244 1245 1246 1247
            /* Protection, exponent and lowest lba field left blank. */
            buflen = req->cmd.xfer;
            break;
        }
        DPRINTF("Unsupported Service Action In\n");
        goto illegal_request;
1248
    case VERIFY_10:
1249
        break;
1250
    default:
1251
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1252
        return -1;
1253 1254 1255 1256
    }
    return buflen;

not_ready:
1257
    if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
1258
        scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
1259
    } else {
1260
        scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
1261
    }
1262
    return -1;
1263 1264

illegal_request:
1265 1266 1267
    if (r->req.status == -1) {
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
    }
1268
    return -1;
1269 1270
}

P
pbrook 已提交
1271 1272 1273 1274 1275
/* Execute a scsi command.  Returns the length of the data expected by the
   command.  This will be Positive for data transfers from the device
   (eg. disk reads), negative for transfers to the device (eg. disk writes),
   and zero if the command does not transfer any data.  */

1276
static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
P
pbrook 已提交
1277
{
1278 1279
    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
P
Paolo Bonzini 已提交
1280
    int32_t len;
P
pbrook 已提交
1281
    uint8_t command;
1282
    int rc;
P
pbrook 已提交
1283 1284

    command = buf[0];
1285
    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
1286

P
pbrook 已提交
1287 1288 1289
#ifdef DEBUG_SCSI
    {
        int i;
1290
        for (i = 1; i < r->req.cmd.len; i++) {
P
pbrook 已提交
1291 1292 1293 1294 1295
            printf(" 0x%02x", buf[i]);
        }
        printf("\n");
    }
#endif
1296

P
pbrook 已提交
1297
    switch (command) {
1298
    case TEST_UNIT_READY:
1299
    case INQUIRY:
1300 1301
    case MODE_SENSE:
    case MODE_SENSE_10:
1302 1303 1304 1305
    case RESERVE:
    case RESERVE_10:
    case RELEASE:
    case RELEASE_10:
1306
    case START_STOP:
1307
    case ALLOW_MEDIUM_REMOVAL:
1308
    case READ_CAPACITY_10:
1309
    case READ_TOC:
1310
    case READ_DVD_STRUCTURE:
1311
    case GET_CONFIGURATION:
1312 1313
    case GET_EVENT_STATUS_NOTIFICATION:
    case MECHANISM_STATUS:
1314
    case SERVICE_ACTION_IN_16:
1315
    case VERIFY_10:
1316
        rc = scsi_disk_emulate_command(r);
1317
        if (rc < 0) {
1318
            return 0;
1319
        }
1320 1321

        r->iov.iov_len = rc;
1322
        break;
1323
    case SYNCHRONIZE_CACHE:
1324 1325
        /* The request is used as the AIO opaque value, so add a ref.  */
        scsi_req_ref(&r->req);
1326 1327
        bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
1328 1329 1330 1331
        if (r->req.aiocb == NULL) {
            scsi_flush_complete(r, -EIO);
        }
        return 0;
1332 1333
    case READ_6:
    case READ_10:
G
Gerd Hoffmann 已提交
1334 1335
    case READ_12:
    case READ_16:
1336
        len = r->req.cmd.xfer / s->qdev.blocksize;
1337
        DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1338
        if (r->req.cmd.lba > s->qdev.max_lba) {
1339
            goto illegal_lba;
1340
        }
P
Paolo Bonzini 已提交
1341 1342
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1343
        break;
1344 1345
    case WRITE_6:
    case WRITE_10:
G
Gerd Hoffmann 已提交
1346 1347
    case WRITE_12:
    case WRITE_16:
1348
    case WRITE_VERIFY_10:
1349 1350
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
1351
        len = r->req.cmd.xfer / s->qdev.blocksize;
1352
        DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
1353 1354
                (command & 0xe) == 0xe ? "And Verify " : "",
                r->req.cmd.lba, len);
P
Paolo Bonzini 已提交
1355
        if (r->req.cmd.lba > s->qdev.max_lba) {
1356
            goto illegal_lba;
1357
        }
P
Paolo Bonzini 已提交
1358 1359
        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
        r->sector_count = len * (s->qdev.blocksize / 512);
P
pbrook 已提交
1360
        break;
1361
    case MODE_SELECT:
1362
        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
1363 1364
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1365
        if (r->req.cmd.xfer > 12) {
1366 1367 1368 1369
            goto fail;
        }
        break;
    case MODE_SELECT_10:
1370
        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
1371 1372
        /* We don't support mode parameter changes.
           Allow the mode parameter header + block descriptors only. */
1373
        if (r->req.cmd.xfer > 16) {
1374 1375 1376 1377
            goto fail;
        }
        break;
    case SEEK_10:
P
Paolo Bonzini 已提交
1378
        DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
P
Paolo Bonzini 已提交
1379
        if (r->req.cmd.lba > s->qdev.max_lba) {
1380 1381
            goto illegal_lba;
        }
1382 1383
        break;
    case WRITE_SAME_16:
1384
        len = r->req.cmd.xfer / s->qdev.blocksize;
1385 1386 1387 1388

        DPRINTF("WRITE SAME(16) (sector %" PRId64 ", count %d)\n",
                r->req.cmd.lba, len);

P
Paolo Bonzini 已提交
1389
        if (r->req.cmd.lba > s->qdev.max_lba) {
1390 1391 1392 1393 1394 1395 1396 1397 1398 1399
            goto illegal_lba;
        }

        /*
         * We only support WRITE SAME with the unmap bit set for now.
         */
        if (!(buf[1] & 0x8)) {
            goto fail;
        }

P
Paolo Bonzini 已提交
1400 1401 1402
        rc = bdrv_discard(s->qdev.conf.bs,
                          r->req.cmd.lba * (s->qdev.blocksize / 512),
                          len * (s->qdev.blocksize / 512));
1403 1404 1405 1406 1407
        if (rc < 0) {
            /* XXX: better error code ?*/
            goto fail;
        }

1408
        break;
1409 1410
    case REQUEST_SENSE:
        abort();
P
pbrook 已提交
1411
    default:
1412
        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
1413
        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
1414
        return 0;
P
pbrook 已提交
1415
    fail:
1416
        scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
1417
        return 0;
1418
    illegal_lba:
1419
        scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
1420
        return 0;
P
pbrook 已提交
1421
    }
1422
    if (r->sector_count == 0 && r->iov.iov_len == 0) {
1423
        scsi_req_complete(&r->req, GOOD);
P
pbrook 已提交
1424
    }
1425
    len = r->sector_count * 512 + r->iov.iov_len;
1426 1427
    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
        return -len;
P
pbrook 已提交
1428
    } else {
1429
        if (!r->sector_count) {
P
pbrook 已提交
1430
            r->sector_count = -1;
1431
        }
1432
        return len;
P
pbrook 已提交
1433 1434 1435
    }
}

J
Jan Kiszka 已提交
1436 1437 1438 1439 1440
static void scsi_disk_reset(DeviceState *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
    uint64_t nb_sectors;

1441
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
J
Jan Kiszka 已提交
1442

1443
    bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
P
Paolo Bonzini 已提交
1444
    nb_sectors /= s->qdev.blocksize / 512;
J
Jan Kiszka 已提交
1445 1446 1447
    if (nb_sectors) {
        nb_sectors--;
    }
P
Paolo Bonzini 已提交
1448
    s->qdev.max_lba = nb_sectors;
J
Jan Kiszka 已提交
1449 1450 1451 1452 1453 1454
}

static void scsi_destroy(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);

1455
    scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
1456
    blockdev_mark_auto_del(s->qdev.conf.bs);
G
Gerd Hoffmann 已提交
1457 1458
}

1459
static void scsi_cd_change_media_cb(void *opaque, bool load)
1460
{
1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475
    SCSIDiskState *s = opaque;

    /*
     * When a CD gets changed, we have to report an ejected state and
     * then a loaded state to guests so that they detect tray
     * open/close and media change events.  Guests that do not use
     * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
     * states rely on this behavior.
     *
     * media_changed governs the state machine used for unit attention
     * report.  media_event is used by GET EVENT STATUS NOTIFICATION.
     */
    s->media_changed = load;
    s->tray_open = !load;
    s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
1476
    s->media_event = true;
1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487
    s->eject_request = false;
}

static void scsi_cd_eject_request_cb(void *opaque, bool force)
{
    SCSIDiskState *s = opaque;

    s->eject_request = true;
    if (force) {
        s->tray_locked = false;
    }
1488 1489
}

1490 1491 1492 1493 1494
static bool scsi_cd_is_tray_open(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_open;
}

1495 1496 1497 1498 1499 1500
static bool scsi_cd_is_medium_locked(void *opaque)
{
    return ((SCSIDiskState *)opaque)->tray_locked;
}

static const BlockDevOps scsi_cd_block_ops = {
1501
    .change_media_cb = scsi_cd_change_media_cb,
1502
    .eject_request_cb = scsi_cd_eject_request_cb,
1503
    .is_tray_open = scsi_cd_is_tray_open,
1504 1505 1506
    .is_medium_locked = scsi_cd_is_medium_locked,
};

1507 1508 1509 1510 1511 1512 1513 1514 1515
static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    if (s->media_changed) {
        s->media_changed = false;
        s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
    }
}

1516
static int scsi_initfn(SCSIDevice *dev)
P
pbrook 已提交
1517
{
1518
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
1519
    DriveInfo *dinfo;
P
pbrook 已提交
1520

1521
    if (!s->qdev.conf.bs) {
1522
        error_report("scsi-disk: drive property not set");
1523 1524 1525
        return -1;
    }

1526
    if (!s->removable && !bdrv_is_inserted(s->qdev.conf.bs)) {
1527 1528 1529 1530
        error_report("Device needs media, but drive is empty");
        return -1;
    }

1531
    if (!s->serial) {
1532
        /* try to fall back to value set with legacy -drive serial=... */
1533
        dinfo = drive_get_by_blockdev(s->qdev.conf.bs);
1534
        if (*dinfo->serial) {
1535
            s->serial = g_strdup(dinfo->serial);
1536
        }
1537 1538
    }

1539
    if (!s->version) {
1540
        s->version = g_strdup(QEMU_VERSION);
1541 1542
    }

1543
    if (bdrv_is_sg(s->qdev.conf.bs)) {
1544
        error_report("scsi-disk: unwanted /dev/sg*");
1545 1546 1547
        return -1;
    }

1548
    if (s->removable) {
1549
        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
P
pbrook 已提交
1550
    }
1551
    bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
1552

1553
    bdrv_iostatus_enable(s->qdev.conf.bs);
P
Paolo Bonzini 已提交
1554
    add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
1555 1556 1557
    return 0;
}

1558 1559
static int scsi_hd_initfn(SCSIDevice *dev)
{
1560 1561 1562 1563
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = s->qdev.conf.logical_block_size;
    s->qdev.type = TYPE_DISK;
    return scsi_initfn(&s->qdev);
1564 1565 1566 1567
}

static int scsi_cd_initfn(SCSIDevice *dev)
{
1568 1569 1570 1571 1572
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    s->qdev.blocksize = 2048;
    s->qdev.type = TYPE_ROM;
    s->removable = true;
    return scsi_initfn(&s->qdev);
1573 1574 1575 1576
}

static int scsi_disk_initfn(SCSIDevice *dev)
{
1577
    DriveInfo *dinfo;
1578 1579

    if (!dev->conf.bs) {
1580
        return scsi_initfn(dev);  /* ... and die there */
1581 1582
    }

1583 1584 1585 1586 1587 1588
    dinfo = drive_get_by_blockdev(dev->conf.bs);
    if (dinfo->media_cd) {
        return scsi_cd_initfn(dev);
    } else {
        return scsi_hd_initfn(dev);
    }
1589 1590
}

P
Paolo Bonzini 已提交
1591
static const SCSIReqOps scsi_disk_reqops = {
P
Paolo Bonzini 已提交
1592
    .size         = sizeof(SCSIDiskReq),
1593 1594 1595 1596 1597 1598
    .free_req     = scsi_free_request,
    .send_command = scsi_send_command,
    .read_data    = scsi_read_data,
    .write_data   = scsi_write_data,
    .cancel_io    = scsi_cancel_io,
    .get_buf      = scsi_get_buf,
P
Paolo Bonzini 已提交
1599 1600
};

P
Paolo Bonzini 已提交
1601 1602
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
                                     uint8_t *buf, void *hba_private)
P
Paolo Bonzini 已提交
1603 1604 1605 1606 1607 1608 1609 1610
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
    SCSIRequest *req;

    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
    return req;
}

1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709
#ifdef __linux__
static int get_device_type(SCSIDiskState *s)
{
    BlockDriverState *bdrv = s->qdev.conf.bs;
    uint8_t cmd[16];
    uint8_t buf[36];
    uint8_t sensebuf[8];
    sg_io_hdr_t io_header;
    int ret;

    memset(cmd, 0, sizeof(cmd));
    memset(buf, 0, sizeof(buf));
    cmd[0] = INQUIRY;
    cmd[4] = sizeof(buf);

    memset(&io_header, 0, sizeof(io_header));
    io_header.interface_id = 'S';
    io_header.dxfer_direction = SG_DXFER_FROM_DEV;
    io_header.dxfer_len = sizeof(buf);
    io_header.dxferp = buf;
    io_header.cmdp = cmd;
    io_header.cmd_len = sizeof(cmd);
    io_header.mx_sb_len = sizeof(sensebuf);
    io_header.sbp = sensebuf;
    io_header.timeout = 6000; /* XXX */

    ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
    if (ret < 0 || io_header.driver_status || io_header.host_status) {
        return -1;
    }
    s->qdev.type = buf[0];
    s->removable = (buf[1] & 0x80) != 0;
    return 0;
}

static int scsi_block_initfn(SCSIDevice *dev)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
    int sg_version;
    int rc;

    if (!s->qdev.conf.bs) {
        error_report("scsi-block: drive property not set");
        return -1;
    }

    /* check we are using a driver managing SG_IO (version 3 and after) */
    if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
        sg_version < 30000) {
        error_report("scsi-block: scsi generic interface too old");
        return -1;
    }

    /* get device type from INQUIRY data */
    rc = get_device_type(s);
    if (rc < 0) {
        error_report("scsi-block: INQUIRY failed");
        return -1;
    }

    /* Make a guess for the block size, we'll fix it when the guest sends.
     * READ CAPACITY.  If they don't, they likely would assume these sizes
     * anyway. (TODO: check in /sys).
     */
    if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
        s->qdev.blocksize = 2048;
    } else {
        s->qdev.blocksize = 512;
    }
    return scsi_initfn(&s->qdev);
}

static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
                                           uint32_t lun, uint8_t *buf,
                                           void *hba_private)
{
    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);

    switch (buf[0]) {
    case READ_6:
    case READ_10:
    case READ_12:
    case READ_16:
    case WRITE_6:
    case WRITE_10:
    case WRITE_12:
    case WRITE_16:
    case WRITE_VERIFY_10:
    case WRITE_VERIFY_12:
    case WRITE_VERIFY_16:
        return scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun,
                              hba_private);
    }

    return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
                          hba_private);
}
#endif

1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723
#define DEFINE_SCSI_DISK_PROPERTIES()                           \
    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)

static SCSIDeviceInfo scsi_disk_info[] = {
    {
        .qdev.name    = "scsi-hd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_hd_initfn,
        .destroy      = scsi_destroy,
1724
        .alloc_req    = scsi_new_request,
1725
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    },{
        .qdev.name    = "scsi-cd",
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI CD-ROM",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_cd_initfn,
        .destroy      = scsi_destroy,
1739
        .alloc_req    = scsi_new_request,
1740
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1741 1742 1743 1744
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759
#ifdef __linux__
    },{
        .qdev.name    = "scsi-block",
        .qdev.fw_name = "disk",
        .qdev.desc    = "SCSI block device passthrough",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_block_initfn,
        .destroy      = scsi_destroy,
        .alloc_req    = scsi_block_new_request,
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_END_OF_LIST(),
        },
#endif
1760 1761 1762 1763 1764 1765 1766 1767
    },{
        .qdev.name    = "scsi-disk", /* legacy -device scsi-disk */
        .qdev.fw_name = "disk",
        .qdev.desc    = "virtual SCSI disk or CD-ROM (legacy)",
        .qdev.size    = sizeof(SCSIDiskState),
        .qdev.reset   = scsi_disk_reset,
        .init         = scsi_disk_initfn,
        .destroy      = scsi_destroy,
1768
        .alloc_req    = scsi_new_request,
1769
        .unit_attention_reported = scsi_disk_unit_attention_reported,
1770 1771 1772 1773 1774 1775
        .qdev.props   = (Property[]) {
            DEFINE_SCSI_DISK_PROPERTIES(),
            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
            DEFINE_PROP_END_OF_LIST(),
        }
    }
1776 1777 1778 1779
};

static void scsi_disk_register_devices(void)
{
1780 1781 1782 1783 1784
    int i;

    for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
        scsi_qdev_register(&scsi_disk_info[i]);
    }
T
ths 已提交
1785
}
1786
device_init(scsi_disk_register_devices)