pc.c 44.3 KB
Newer Older
B
bellard 已提交
1 2
/*
 * QEMU PC System Emulator
3
 *
B
bellard 已提交
4
 * Copyright (c) 2003-2004 Fabrice Bellard
5
 *
B
bellard 已提交
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
P
pbrook 已提交
24 25 26 27 28 29 30 31 32 33
#include "hw.h"
#include "pc.h"
#include "fdc.h"
#include "pci.h"
#include "block.h"
#include "sysemu.h"
#include "audio/audio.h"
#include "net.h"
#include "smbus.h"
#include "boards.h"
A
aliguori 已提交
34
#include "monitor.h"
35
#include "fw_cfg.h"
A
aliguori 已提交
36
#include "hpet_emul.h"
R
Richard W.M. Jones 已提交
37
#include "watchdog.h"
38
#include "smbios.h"
G
Gerd Hoffmann 已提交
39
#include "ide.h"
B
bellard 已提交
40

B
bellard 已提交
41 42 43
/* output Bochs bios info messages */
//#define DEBUG_BIOS

A
Alexander Graf 已提交
44 45 46
/* Show multiboot debug output */
//#define DEBUG_MULTIBOOT

B
bellard 已提交
47 48
#define BIOS_FILENAME "bios.bin"
#define VGABIOS_FILENAME "vgabios.bin"
B
bellard 已提交
49
#define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
B
bellard 已提交
50

51 52
#define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)

53 54
/* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */
#define ACPI_DATA_SIZE       0x10000
55
#define BIOS_CFG_IOPORT 0x510
56
#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
57
#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
J
Jes Sorensen 已提交
58
#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
B
bellard 已提交
59

T
ths 已提交
60 61
#define MAX_IDE_BUS 2

62
static fdctrl_t *floppy_controller;
B
bellard 已提交
63
static RTCState *rtc_state;
B
bellard 已提交
64
static PITState *pit;
65
static PCII440FXState *i440fx_state;
B
bellard 已提交
66

67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
typedef struct rom_reset_data {
    uint8_t *data;
    target_phys_addr_t addr;
    unsigned size;
} RomResetData;

static void option_rom_reset(void *_rrd)
{
    RomResetData *rrd = _rrd;

    cpu_physical_memory_write_rom(rrd->addr, rrd->data, rrd->size);
}

static void option_rom_setup_reset(target_phys_addr_t addr, unsigned size)
{
    RomResetData *rrd = qemu_malloc(sizeof *rrd);

    rrd->data = qemu_malloc(size);
    cpu_physical_memory_read(addr, rrd->data, size);
    rrd->addr = addr;
    rrd->size = size;
88
    qemu_register_reset(option_rom_reset, rrd);
89 90
}

91 92
typedef struct isa_irq_state {
    qemu_irq *i8259;
A
Avi Kivity 已提交
93
    qemu_irq *ioapic;
94 95 96 97 98 99
} IsaIrqState;

static void isa_irq_handler(void *opaque, int n, int level)
{
    IsaIrqState *isa = (IsaIrqState *)opaque;

A
Avi Kivity 已提交
100 101 102 103 104
    if (n < 16) {
        qemu_set_irq(isa->i8259[n], level);
    }
    qemu_set_irq(isa->ioapic[n], level);
};
105

B
bellard 已提交
106
static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
B
bellard 已提交
107 108 109
{
}

110
/* MSDOS compatibility mode FPU exception support */
P
pbrook 已提交
111
static qemu_irq ferr_irq;
112 113 114
/* XXX: add IGNNE support */
void cpu_set_ferr(CPUX86State *s)
{
P
pbrook 已提交
115
    qemu_irq_raise(ferr_irq);
116 117 118 119
}

static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
{
P
pbrook 已提交
120
    qemu_irq_lower(ferr_irq);
121 122
}

B
bellard 已提交
123 124 125
/* TSC handling */
uint64_t cpu_get_tsc(CPUX86State *env)
{
126
    return cpu_get_ticks();
B
bellard 已提交
127 128
}

B
bellard 已提交
129 130 131 132 133 134 135 136
/* SMM support */
void cpu_smm_update(CPUState *env)
{
    if (i440fx_state && env == first_cpu)
        i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
}


B
bellard 已提交
137 138 139 140 141 142 143 144 145
/* IRQ handling */
int cpu_get_pic_interrupt(CPUState *env)
{
    int intno;

    intno = apic_get_interrupt(env);
    if (intno >= 0) {
        /* set irq request if a PIC irq is still pending */
        /* XXX: improve that */
146
        pic_update_irq(isa_pic);
B
bellard 已提交
147 148 149
        return intno;
    }
    /* read the irq from the PIC */
150 151 152
    if (!apic_accept_pic_intr(env))
        return -1;

B
bellard 已提交
153 154 155 156
    intno = pic_read_irq(isa_pic);
    return intno;
}

P
pbrook 已提交
157
static void pic_irq_request(void *opaque, int irq, int level)
B
bellard 已提交
158
{
159 160
    CPUState *env = first_cpu;

A
aurel32 已提交
161 162 163
    if (env->apic_state) {
        while (env) {
            if (apic_accept_pic_intr(env))
164
                apic_deliver_pic_intr(env, level);
A
aurel32 已提交
165 166 167
            env = env->next_cpu;
        }
    } else {
A
aurel32 已提交
168 169 170 171
        if (level)
            cpu_interrupt(env, CPU_INTERRUPT_HARD);
        else
            cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
172
    }
B
bellard 已提交
173 174
}

B
bellard 已提交
175 176
/* PC cmos mappings */

B
bellard 已提交
177 178
#define REG_EQUIPMENT_BYTE          0x14

179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
static int cmos_get_fd_drive_type(int fd0)
{
    int val;

    switch (fd0) {
    case 0:
        /* 1.44 Mb 3"5 drive */
        val = 4;
        break;
    case 1:
        /* 2.88 Mb 3"5 drive */
        val = 5;
        break;
    case 2:
        /* 1.2 Mb 5"5 drive */
        val = 2;
        break;
    default:
        val = 0;
        break;
    }
    return val;
}

203
static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
B
bellard 已提交
204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
{
    RTCState *s = rtc_state;
    int cylinders, heads, sectors;
    bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
    rtc_set_memory(s, type_ofs, 47);
    rtc_set_memory(s, info_ofs, cylinders);
    rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
    rtc_set_memory(s, info_ofs + 2, heads);
    rtc_set_memory(s, info_ofs + 3, 0xff);
    rtc_set_memory(s, info_ofs + 4, 0xff);
    rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
    rtc_set_memory(s, info_ofs + 6, cylinders);
    rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
    rtc_set_memory(s, info_ofs + 8, sectors);
}

220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236
/* convert boot_device letter to something recognizable by the bios */
static int boot_device2nibble(char boot_device)
{
    switch(boot_device) {
    case 'a':
    case 'b':
        return 0x01; /* floppy boot */
    case 'c':
        return 0x02; /* hard drive boot */
    case 'd':
        return 0x03; /* CD-ROM boot */
    case 'n':
        return 0x04; /* Network boot */
    }
    return 0;
}

237 238
/* copy/pasted from cmos_init, should be made a general function
 and used there as well */
239
static int pc_boot_set(void *opaque, const char *boot_device)
240
{
A
aliguori 已提交
241
    Monitor *mon = cur_mon;
242
#define PC_MAX_BOOT_DEVICES 3
243
    RTCState *s = (RTCState *)opaque;
244 245 246 247 248
    int nbds, bds[3] = { 0, };
    int i;

    nbds = strlen(boot_device);
    if (nbds > PC_MAX_BOOT_DEVICES) {
A
aliguori 已提交
249
        monitor_printf(mon, "Too many boot devices for PC\n");
250 251 252 253 254
        return(1);
    }
    for (i = 0; i < nbds; i++) {
        bds[i] = boot_device2nibble(boot_device[i]);
        if (bds[i] == 0) {
A
aliguori 已提交
255 256
            monitor_printf(mon, "Invalid boot device for PC: '%c'\n",
                           boot_device[i]);
257 258 259 260 261 262 263 264
            return(1);
        }
    }
    rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
    rtc_set_memory(s, 0x38, (bds[2] << 4));
    return(0);
}

B
bellard 已提交
265
/* hd_table must contain 4 block drivers */
266
static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
267
                      const char *boot_device, DriveInfo **hd_table)
B
bellard 已提交
268
{
B
bellard 已提交
269
    RTCState *s = rtc_state;
270
    int nbds, bds[3] = { 0, };
B
bellard 已提交
271
    int val;
B
bellard 已提交
272
    int fd0, fd1, nb;
B
bellard 已提交
273
    int i;
B
bellard 已提交
274 275

    /* various important CMOS locations needed by PC/Bochs bios */
B
bellard 已提交
276 277

    /* memory size */
B
bellard 已提交
278 279 280 281
    val = 640; /* base memory in K */
    rtc_set_memory(s, 0x15, val);
    rtc_set_memory(s, 0x16, val >> 8);

B
bellard 已提交
282 283 284
    val = (ram_size / 1024) - 1024;
    if (val > 65535)
        val = 65535;
B
bellard 已提交
285 286 287 288
    rtc_set_memory(s, 0x17, val);
    rtc_set_memory(s, 0x18, val >> 8);
    rtc_set_memory(s, 0x30, val);
    rtc_set_memory(s, 0x31, val >> 8);
B
bellard 已提交
289

290 291 292 293 294 295
    if (above_4g_mem_size) {
        rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
        rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
        rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
    }

B
bellard 已提交
296 297 298 299
    if (ram_size > (16 * 1024 * 1024))
        val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
    else
        val = 0;
B
bellard 已提交
300 301
    if (val > 65535)
        val = 65535;
B
bellard 已提交
302 303
    rtc_set_memory(s, 0x34, val);
    rtc_set_memory(s, 0x35, val >> 8);
304

A
aurel32 已提交
305 306 307
    /* set the number of CPU */
    rtc_set_memory(s, 0x5f, smp_cpus - 1);

308
    /* set boot devices, and disable floppy signature check if requested */
309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324
#define PC_MAX_BOOT_DEVICES 3
    nbds = strlen(boot_device);
    if (nbds > PC_MAX_BOOT_DEVICES) {
        fprintf(stderr, "Too many boot devices for PC\n");
        exit(1);
    }
    for (i = 0; i < nbds; i++) {
        bds[i] = boot_device2nibble(boot_device[i]);
        if (bds[i] == 0) {
            fprintf(stderr, "Invalid boot device for PC: '%c'\n",
                    boot_device[i]);
            exit(1);
        }
    }
    rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
    rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ?  0x0 : 0x1));
B
bellard 已提交
325

B
bellard 已提交
326 327
    /* floppy type */

328 329
    fd0 = fdctrl_get_drive_type(floppy_controller, 0);
    fd1 = fdctrl_get_drive_type(floppy_controller, 1);
B
bellard 已提交
330

331
    val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
B
bellard 已提交
332
    rtc_set_memory(s, 0x10, val);
333

B
bellard 已提交
334
    val = 0;
B
bellard 已提交
335
    nb = 0;
B
bellard 已提交
336 337 338 339 340 341 342 343
    if (fd0 < 3)
        nb++;
    if (fd1 < 3)
        nb++;
    switch (nb) {
    case 0:
        break;
    case 1:
B
bellard 已提交
344
        val |= 0x01; /* 1 drive, ready for boot */
B
bellard 已提交
345 346
        break;
    case 2:
B
bellard 已提交
347
        val |= 0x41; /* 2 drives, ready for boot */
B
bellard 已提交
348 349
        break;
    }
B
bellard 已提交
350 351 352 353
    val |= 0x02; /* FPU is there */
    val |= 0x04; /* PS/2 mouse installed */
    rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);

B
bellard 已提交
354 355 356 357
    /* hard drives */

    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
    if (hd_table[0])
358
        cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
359
    if (hd_table[1])
360
        cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
B
bellard 已提交
361 362

    val = 0;
B
bellard 已提交
363
    for (i = 0; i < 4; i++) {
B
bellard 已提交
364
        if (hd_table[i]) {
B
bellard 已提交
365 366 367 368 369
            int cylinders, heads, sectors, translation;
            /* NOTE: bdrv_get_geometry_hint() returns the physical
                geometry.  It is always such that: 1 <= sects <= 63, 1
                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
                geometry can be different if a translation is done. */
370
            translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
B
bellard 已提交
371
            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
372
                bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
B
bellard 已提交
373 374 375 376 377 378 379
                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
                    /* No translation. */
                    translation = 0;
                } else {
                    /* LBA translation. */
                    translation = 1;
                }
B
bellard 已提交
380
            } else {
B
bellard 已提交
381
                translation--;
B
bellard 已提交
382 383 384
            }
            val |= translation << (i * 2);
        }
B
bellard 已提交
385
    }
B
bellard 已提交
386
    rtc_set_memory(s, 0x39, val);
B
bellard 已提交
387 388
}

389 390 391 392 393 394 395 396 397 398 399
void ioport_set_a20(int enable)
{
    /* XXX: send to all CPUs ? */
    cpu_x86_set_a20(first_cpu, enable);
}

int ioport_get_a20(void)
{
    return ((first_cpu->a20_mask >> 20) & 1);
}

B
bellard 已提交
400 401
static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
{
402
    ioport_set_a20((val >> 1) & 1);
B
bellard 已提交
403 404 405 406 407
    /* XXX: bit 0 is fast reset */
}

static uint32_t ioport92_read(void *opaque, uint32_t addr)
{
408
    return ioport_get_a20() << 1;
B
bellard 已提交
409 410
}

B
bellard 已提交
411 412 413
/***********************************************************/
/* Bochs BIOS debug ports */

414
static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
B
bellard 已提交
415
{
B
bellard 已提交
416 417
    static const char shutdown_str[8] = "Shutdown";
    static int shutdown_index = 0;
418

B
bellard 已提交
419 420 421 422 423 424 425 426 427 428 429 430
    switch(addr) {
        /* Bochs BIOS messages */
    case 0x400:
    case 0x401:
        fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
        exit(1);
    case 0x402:
    case 0x403:
#ifdef DEBUG_BIOS
        fprintf(stderr, "%c", val);
#endif
        break;
B
bellard 已提交
431 432 433 434 435 436 437 438 439 440 441 442
    case 0x8900:
        /* same as Bochs power off */
        if (val == shutdown_str[shutdown_index]) {
            shutdown_index++;
            if (shutdown_index == 8) {
                shutdown_index = 0;
                qemu_system_shutdown_request();
            }
        } else {
            shutdown_index = 0;
        }
        break;
B
bellard 已提交
443 444 445 446 447 448 449 450 451 452 453 454 455 456 457

        /* LGPL'ed VGA BIOS messages */
    case 0x501:
    case 0x502:
        fprintf(stderr, "VGA BIOS panic, line %d\n", val);
        exit(1);
    case 0x500:
    case 0x503:
#ifdef DEBUG_BIOS
        fprintf(stderr, "%c", val);
#endif
        break;
    }
}

458 459
extern uint64_t node_cpumask[MAX_NODES];

A
Alexander Graf 已提交
460
static void *bochs_bios_init(void)
B
bellard 已提交
461
{
462
    void *fw_cfg;
463 464
    uint8_t *smbios_table;
    size_t smbios_len;
465 466
    uint64_t *numa_fw_cfg;
    int i, j;
467

B
bellard 已提交
468 469 470 471
    register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
    register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
B
bellard 已提交
472
    register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
B
bellard 已提交
473 474 475 476 477

    register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
    register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
478 479

    fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
A
Alexander Graf 已提交
480

481
    fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
482
    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
483 484
    fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
                     acpi_tables_len);
J
Jes Sorensen 已提交
485
    fw_cfg_add_bytes(fw_cfg, FW_CFG_IRQ0_OVERRIDE, &irq0override, 1);
486 487 488 489 490

    smbios_table = smbios_get_table(&smbios_len);
    if (smbios_table)
        fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
                         smbios_table, smbios_len);
491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510

    /* allocate memory for the NUMA channel: one (64bit) word for the number
     * of nodes, one word for each VCPU->node and one word for each node to
     * hold the amount of memory.
     */
    numa_fw_cfg = qemu_mallocz((1 + smp_cpus + nb_numa_nodes) * 8);
    numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
    for (i = 0; i < smp_cpus; i++) {
        for (j = 0; j < nb_numa_nodes; j++) {
            if (node_cpumask[j] & (1 << i)) {
                numa_fw_cfg[i + 1] = cpu_to_le64(j);
                break;
            }
        }
    }
    for (i = 0; i < nb_numa_nodes; i++) {
        numa_fw_cfg[smp_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
    }
    fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
                     (1 + smp_cpus + nb_numa_nodes) * 8);
A
Alexander Graf 已提交
511 512

    return fw_cfg;
B
bellard 已提交
513 514
}

T
ths 已提交
515 516
/* Generate an initial boot sector which sets state and jump to
   a specified vector */
517
static void generate_bootsect(target_phys_addr_t option_rom,
518
                              uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
T
ths 已提交
519
{
520 521
    uint8_t rom[512], *p, *reloc;
    uint8_t sum;
T
ths 已提交
522 523
    int i;

524 525 526 527 528 529
    memset(rom, 0, sizeof(rom));

    p = rom;
    /* Make sure we have an option rom signature */
    *p++ = 0x55;
    *p++ = 0xaa;
T
ths 已提交
530

531 532
    /* ROM size in sectors*/
    *p++ = 1;
T
ths 已提交
533

534
    /* Hook int19 */
T
ths 已提交
535

536 537 538 539
    *p++ = 0x50;		/* push ax */
    *p++ = 0x1e;		/* push ds */
    *p++ = 0x31; *p++ = 0xc0;	/* xor ax, ax */
    *p++ = 0x8e; *p++ = 0xd8;	/* mov ax, ds */
T
ths 已提交
540

541 542 543 544 545 546 547 548 549 550 551 552
    *p++ = 0xc7; *p++ = 0x06;   /* movvw _start,0x64 */
    *p++ = 0x64; *p++ = 0x00;
    reloc = p;
    *p++ = 0x00; *p++ = 0x00;

    *p++ = 0x8c; *p++ = 0x0e;   /* mov cs,0x66 */
    *p++ = 0x66; *p++ = 0x00;

    *p++ = 0x1f;		/* pop ds */
    *p++ = 0x58;		/* pop ax */
    *p++ = 0xcb;		/* lret */
    
T
ths 已提交
553
    /* Actual code */
554 555
    *reloc = (p - rom);

T
ths 已提交
556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584
    *p++ = 0xfa;		/* CLI */
    *p++ = 0xfc;		/* CLD */

    for (i = 0; i < 6; i++) {
	if (i == 1)		/* Skip CS */
	    continue;

	*p++ = 0xb8;		/* MOV AX,imm16 */
	*p++ = segs[i];
	*p++ = segs[i] >> 8;
	*p++ = 0x8e;		/* MOV <seg>,AX */
	*p++ = 0xc0 + (i << 3);
    }

    for (i = 0; i < 8; i++) {
	*p++ = 0x66;		/* 32-bit operand size */
	*p++ = 0xb8 + i;	/* MOV <reg>,imm32 */
	*p++ = gpr[i];
	*p++ = gpr[i] >> 8;
	*p++ = gpr[i] >> 16;
	*p++ = gpr[i] >> 24;
    }

    *p++ = 0xea;		/* JMP FAR */
    *p++ = ip;			/* IP */
    *p++ = ip >> 8;
    *p++ = segs[1];		/* CS */
    *p++ = segs[1] >> 8;

585 586 587 588 589 590
    /* sign rom */
    sum = 0;
    for (i = 0; i < (sizeof(rom) - 1); i++)
        sum += rom[i];
    rom[sizeof(rom) - 1] = -sum;

591
    cpu_physical_memory_write_rom(option_rom, rom, sizeof(rom));
G
Glauber Costa 已提交
592
    option_rom_setup_reset(option_rom, sizeof (rom));
T
ths 已提交
593
}
B
bellard 已提交
594

T
ths 已提交
595 596 597 598 599 600 601 602 603 604 605 606 607 608
static long get_file_size(FILE *f)
{
    long where, size;

    /* XXX: on Unix systems, using fstat() probably makes more sense */

    where = ftell(f);
    fseek(f, 0, SEEK_END);
    size = ftell(f);
    fseek(f, where, SEEK_SET);

    return size;
}

A
Alexander Graf 已提交
609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820
#define MULTIBOOT_STRUCT_ADDR 0x9000

#if MULTIBOOT_STRUCT_ADDR > 0xf0000
#error multiboot struct needs to fit in 16 bit real mode
#endif

static int load_multiboot(void *fw_cfg,
                          FILE *f,
                          const char *kernel_filename,
                          const char *initrd_filename,
                          const char *kernel_cmdline,
                          uint8_t *header)
{
    int i, t, is_multiboot = 0;
    uint32_t flags = 0;
    uint32_t mh_entry_addr;
    uint32_t mh_load_addr;
    uint32_t mb_kernel_size;
    uint32_t mmap_addr = MULTIBOOT_STRUCT_ADDR;
    uint32_t mb_bootinfo = MULTIBOOT_STRUCT_ADDR + 0x500;
    uint32_t mb_cmdline = mb_bootinfo + 0x200;
    uint32_t mb_mod_end;

    /* Ok, let's see if it is a multiboot image.
       The header is 12x32bit long, so the latest entry may be 8192 - 48. */
    for (i = 0; i < (8192 - 48); i += 4) {
        if (ldl_p(header+i) == 0x1BADB002) {
            uint32_t checksum = ldl_p(header+i+8);
            flags = ldl_p(header+i+4);
            checksum += flags;
            checksum += (uint32_t)0x1BADB002;
            if (!checksum) {
                is_multiboot = 1;
                break;
            }
        }
    }

    if (!is_multiboot)
        return 0; /* no multiboot */

#ifdef DEBUG_MULTIBOOT
    fprintf(stderr, "qemu: I believe we found a multiboot image!\n");
#endif

    if (flags & 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
        fprintf(stderr, "qemu: multiboot knows VBE. we don't.\n");
    }
    if (!(flags & 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
        uint64_t elf_entry;
        int kernel_size;
        fclose(f);
        kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL);
        if (kernel_size < 0) {
            fprintf(stderr, "Error while loading elf kernel\n");
            exit(1);
        }
        mh_load_addr = mh_entry_addr = elf_entry;
        mb_kernel_size = kernel_size;

#ifdef DEBUG_MULTIBOOT
        fprintf(stderr, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
                mb_kernel_size, (size_t)mh_entry_addr);
#endif
    } else {
        /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
        uint32_t mh_header_addr = ldl_p(header+i+12);
        mh_load_addr = ldl_p(header+i+16);
#ifdef DEBUG_MULTIBOOT
        uint32_t mh_load_end_addr = ldl_p(header+i+20);
        uint32_t mh_bss_end_addr = ldl_p(header+i+24);
#endif
        uint32_t mb_kernel_text_offset = i - (mh_header_addr - mh_load_addr);

        mh_entry_addr = ldl_p(header+i+28);
        mb_kernel_size = get_file_size(f) - mb_kernel_text_offset;

        /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
        uint32_t mh_mode_type = ldl_p(header+i+32);
        uint32_t mh_width = ldl_p(header+i+36);
        uint32_t mh_height = ldl_p(header+i+40);
        uint32_t mh_depth = ldl_p(header+i+44); */

#ifdef DEBUG_MULTIBOOT
        fprintf(stderr, "multiboot: mh_header_addr = %#x\n", mh_header_addr);
        fprintf(stderr, "multiboot: mh_load_addr = %#x\n", mh_load_addr);
        fprintf(stderr, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr);
        fprintf(stderr, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr);
#endif

        fseek(f, mb_kernel_text_offset, SEEK_SET);

#ifdef DEBUG_MULTIBOOT
        fprintf(stderr, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
                mb_kernel_size, mh_load_addr);
#endif

        if (!fread_targphys_ok(mh_load_addr, mb_kernel_size, f)) {
            fprintf(stderr, "qemu: read error on multiboot kernel '%s' (%#x)\n",
                    kernel_filename, mb_kernel_size);
            exit(1);
        }
        fclose(f);
    }

    /* blob size is only the kernel for now */
    mb_mod_end = mh_load_addr + mb_kernel_size;

    /* load modules */
    stl_phys(mb_bootinfo + 20, 0x0); /* mods_count */
    if (initrd_filename) {
        uint32_t mb_mod_info = mb_bootinfo + 0x100;
        uint32_t mb_mod_cmdline = mb_bootinfo + 0x300;
        uint32_t mb_mod_start = mh_load_addr;
        uint32_t mb_mod_length = mb_kernel_size;
        char *next_initrd;
        char *next_space;
        int mb_mod_count = 0;

        do {
            next_initrd = strchr(initrd_filename, ',');
            if (next_initrd)
                *next_initrd = '\0';
            /* if a space comes after the module filename, treat everything
               after that as parameters */
            cpu_physical_memory_write(mb_mod_cmdline, (uint8_t*)initrd_filename,
                                      strlen(initrd_filename) + 1);
            stl_phys(mb_mod_info + 8, mb_mod_cmdline); /* string */
            mb_mod_cmdline += strlen(initrd_filename) + 1;
            if ((next_space = strchr(initrd_filename, ' ')))
                *next_space = '\0';
#ifdef DEBUG_MULTIBOOT
	     printf("multiboot loading module: %s\n", initrd_filename);
#endif
            f = fopen(initrd_filename, "rb");
            if (f) {
                mb_mod_start = (mb_mod_start + mb_mod_length + (TARGET_PAGE_SIZE - 1))
                             & (TARGET_PAGE_MASK);
                mb_mod_length = get_file_size(f);
                mb_mod_end = mb_mod_start + mb_mod_length;

                if (!fread_targphys_ok(mb_mod_start, mb_mod_length, f)) {
                    fprintf(stderr, "qemu: read error on multiboot module '%s' (%#x)\n",
                            initrd_filename, mb_mod_length);
                    exit(1);
                }

                mb_mod_count++;
                stl_phys(mb_mod_info + 0, mb_mod_start);
                stl_phys(mb_mod_info + 4, mb_mod_start + mb_mod_length);
#ifdef DEBUG_MULTIBOOT
                printf("mod_start: %#x\nmod_end:   %#x\n", mb_mod_start,
                       mb_mod_start + mb_mod_length);
#endif
                stl_phys(mb_mod_info + 12, 0x0); /* reserved */
            }
            initrd_filename = next_initrd+1;
            mb_mod_info += 16;
        } while (next_initrd);
        stl_phys(mb_bootinfo + 20, mb_mod_count); /* mods_count */
        stl_phys(mb_bootinfo + 24, mb_bootinfo + 0x100); /* mods_addr */
    }

    /* Make sure we're getting kernel + modules back after reset */
    option_rom_setup_reset(mh_load_addr, mb_mod_end - mh_load_addr);

    /* Commandline support */
    stl_phys(mb_bootinfo + 16, mb_cmdline);
    t = strlen(kernel_filename);
    cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_filename, t);
    mb_cmdline += t;
    stb_phys(mb_cmdline++, ' ');
    t = strlen(kernel_cmdline) + 1;
    cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_cmdline, t);

    /* the kernel is where we want it to be now */

#define MULTIBOOT_FLAGS_MEMORY (1 << 0)
#define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
#define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
#define MULTIBOOT_FLAGS_MODULES (1 << 3)
#define MULTIBOOT_FLAGS_MMAP (1 << 6)
    stl_phys(mb_bootinfo, MULTIBOOT_FLAGS_MEMORY
                        | MULTIBOOT_FLAGS_BOOT_DEVICE
                        | MULTIBOOT_FLAGS_CMDLINE
                        | MULTIBOOT_FLAGS_MODULES
                        | MULTIBOOT_FLAGS_MMAP);
    stl_phys(mb_bootinfo + 4, 640); /* mem_lower */
    stl_phys(mb_bootinfo + 8, ram_size / 1024); /* mem_upper */
    stl_phys(mb_bootinfo + 12, 0x8001ffff); /* XXX: use the -boot switch? */
    stl_phys(mb_bootinfo + 48, mmap_addr); /* mmap_addr */

#ifdef DEBUG_MULTIBOOT
    fprintf(stderr, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr);
#endif

    /* Pass variables to option rom */
    fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, mh_entry_addr);
    fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, mb_bootinfo);
    fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, mmap_addr);

    /* Make sure we're getting the config space back after reset */
    option_rom_setup_reset(mb_bootinfo, 0x500);

    option_rom[nb_option_roms] = "multiboot.bin";
    nb_option_roms++;

    return 1; /* yes, we are multiboot */
}

static void load_linux(void *fw_cfg,
                       target_phys_addr_t option_rom,
821
                       const char *kernel_filename,
T
ths 已提交
822
		       const char *initrd_filename,
G
Glauber Costa 已提交
823 824
		       const char *kernel_cmdline,
               target_phys_addr_t max_ram_size)
T
ths 已提交
825 826 827 828 829
{
    uint16_t protocol;
    uint32_t gpr[8];
    uint16_t seg[6];
    uint16_t real_seg;
P
Paul Brook 已提交
830
    int setup_size, kernel_size, initrd_size = 0, cmdline_size;
T
ths 已提交
831
    uint32_t initrd_max;
A
Alexander Graf 已提交
832
    uint8_t header[8192];
P
Paul Brook 已提交
833
    target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
T
ths 已提交
834
    FILE *f, *fi;
P
Pascal Terjan 已提交
835
    char *vmode;
T
ths 已提交
836 837 838 839 840 841 842

    /* Align to 16 bytes as a paranoia measure */
    cmdline_size = (strlen(kernel_cmdline)+16) & ~15;

    /* load the kernel header */
    f = fopen(kernel_filename, "rb");
    if (!f || !(kernel_size = get_file_size(f)) ||
A
Alexander Graf 已提交
843 844
	fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
	MIN(ARRAY_SIZE(header), kernel_size)) {
T
ths 已提交
845 846 847 848 849 850
	fprintf(stderr, "qemu: could not load kernel '%s'\n",
		kernel_filename);
	exit(1);
    }

    /* kernel protocol version */
B
bellard 已提交
851
#if 0
T
ths 已提交
852
    fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
B
bellard 已提交
853
#endif
T
ths 已提交
854 855
    if (ldl_p(header+0x202) == 0x53726448)
	protocol = lduw_p(header+0x206);
A
Alexander Graf 已提交
856 857 858 859 860 861
    else {
	/* This looks like a multiboot kernel. If it is, let's stop
	   treating it like a Linux kernel. */
	if (load_multiboot(fw_cfg, f, kernel_filename,
                           initrd_filename, kernel_cmdline, header))
	   return;
T
ths 已提交
862
	protocol = 0;
A
Alexander Graf 已提交
863
    }
T
ths 已提交
864 865 866

    if (protocol < 0x200 || !(header[0x211] & 0x01)) {
	/* Low kernel */
867 868 869
	real_addr    = 0x90000;
	cmdline_addr = 0x9a000 - cmdline_size;
	prot_addr    = 0x10000;
T
ths 已提交
870 871
    } else if (protocol < 0x202) {
	/* High but ancient kernel */
872 873 874
	real_addr    = 0x90000;
	cmdline_addr = 0x9a000 - cmdline_size;
	prot_addr    = 0x100000;
T
ths 已提交
875 876
    } else {
	/* High and recent kernel */
877 878 879
	real_addr    = 0x10000;
	cmdline_addr = 0x20000;
	prot_addr    = 0x100000;
T
ths 已提交
880 881
    }

B
bellard 已提交
882
#if 0
T
ths 已提交
883
    fprintf(stderr,
884 885 886
	    "qemu: real_addr     = 0x" TARGET_FMT_plx "\n"
	    "qemu: cmdline_addr  = 0x" TARGET_FMT_plx "\n"
	    "qemu: prot_addr     = 0x" TARGET_FMT_plx "\n",
887 888 889
	    real_addr,
	    cmdline_addr,
	    prot_addr);
B
bellard 已提交
890
#endif
T
ths 已提交
891 892 893 894 895 896 897

    /* highest address for loading the initrd */
    if (protocol >= 0x203)
	initrd_max = ldl_p(header+0x22c);
    else
	initrd_max = 0x37ffffff;

G
Glauber Costa 已提交
898 899
    if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
    	initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
T
ths 已提交
900 901

    /* kernel command line */
902
    pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
T
ths 已提交
903 904

    if (protocol >= 0x202) {
905
	stl_p(header+0x228, cmdline_addr);
T
ths 已提交
906 907 908 909 910
    } else {
	stw_p(header+0x20, 0xA33F);
	stw_p(header+0x22, cmdline_addr-real_addr);
    }

P
Pascal Terjan 已提交
911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928
    /* handle vga= parameter */
    vmode = strstr(kernel_cmdline, "vga=");
    if (vmode) {
        unsigned int video_mode;
        /* skip "vga=" */
        vmode += 4;
        if (!strncmp(vmode, "normal", 6)) {
            video_mode = 0xffff;
        } else if (!strncmp(vmode, "ext", 3)) {
            video_mode = 0xfffe;
        } else if (!strncmp(vmode, "ask", 3)) {
            video_mode = 0xfffd;
        } else {
            video_mode = strtol(vmode, NULL, 0);
        }
        stw_p(header+0x1fa, video_mode);
    }

T
ths 已提交
929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956
    /* loader type */
    /* High nybble = B reserved for Qemu; low nybble is revision number.
       If this code is substantially changed, you may want to consider
       incrementing the revision. */
    if (protocol >= 0x200)
	header[0x210] = 0xB0;

    /* heap */
    if (protocol >= 0x201) {
	header[0x211] |= 0x80;	/* CAN_USE_HEAP */
	stw_p(header+0x224, cmdline_addr-real_addr-0x200);
    }

    /* load initrd */
    if (initrd_filename) {
	if (protocol < 0x200) {
	    fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
	    exit(1);
	}

	fi = fopen(initrd_filename, "rb");
	if (!fi) {
	    fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
		    initrd_filename);
	    exit(1);
	}

	initrd_size = get_file_size(fi);
957
	initrd_addr = (initrd_max-initrd_size) & ~4095;
T
ths 已提交
958

959
	if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
T
ths 已提交
960 961 962 963 964 965
	    fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
		    initrd_filename);
	    exit(1);
	}
	fclose(fi);

966
	stl_p(header+0x218, initrd_addr);
T
ths 已提交
967 968 969 970
	stl_p(header+0x21c, initrd_size);
    }

    /* store the finalized header and load the rest of the kernel */
A
Alexander Graf 已提交
971
    cpu_physical_memory_write(real_addr, header, ARRAY_SIZE(header));
T
ths 已提交
972 973 974 975 976 977

    setup_size = header[0x1f1];
    if (setup_size == 0)
	setup_size = 4;

    setup_size = (setup_size+1)*512;
A
Alexander Graf 已提交
978 979 980 981 982 983 984 985 986
    /* Size of protected-mode code */
    kernel_size -= (setup_size > ARRAY_SIZE(header)) ? setup_size : ARRAY_SIZE(header);

    /* In case we have read too much already, copy that over */
    if (setup_size < ARRAY_SIZE(header)) {
        cpu_physical_memory_write(prot_addr, header + setup_size, ARRAY_SIZE(header) - setup_size);
        prot_addr += (ARRAY_SIZE(header) - setup_size);
        setup_size = ARRAY_SIZE(header);
    }
T
ths 已提交
987

A
Alexander Graf 已提交
988 989
    if (!fread_targphys_ok(real_addr + ARRAY_SIZE(header),
                           setup_size - ARRAY_SIZE(header), f) ||
990
	!fread_targphys_ok(prot_addr, kernel_size, f)) {
T
ths 已提交
991 992 993 994 995 996 997
	fprintf(stderr, "qemu: read error on kernel '%s'\n",
		kernel_filename);
	exit(1);
    }
    fclose(f);

    /* generate bootsector to set up the initial register state */
998
    real_seg = real_addr >> 4;
T
ths 已提交
999 1000 1001 1002 1003
    seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
    seg[1] = real_seg+0x20;	/* CS */
    memset(gpr, 0, sizeof gpr);
    gpr[4] = cmdline_addr-real_addr-16;	/* SP (-16 is paranoia) */

G
Glauber Costa 已提交
1004 1005 1006 1007 1008 1009
    option_rom_setup_reset(real_addr, setup_size);
    option_rom_setup_reset(prot_addr, kernel_size);
    option_rom_setup_reset(cmdline_addr, cmdline_size);
    if (initrd_filename)
        option_rom_setup_reset(initrd_addr, initrd_size);

1010
    generate_bootsect(option_rom, gpr, seg, 0);
T
ths 已提交
1011 1012
}

B
bellard 已提交
1013 1014 1015 1016 1017 1018
static const int ide_iobase[2] = { 0x1f0, 0x170 };
static const int ide_iobase2[2] = { 0x3f6, 0x376 };
static const int ide_irq[2] = { 14, 15 };

#define NE2000_NB_MAX 6

1019
static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
B
bellard 已提交
1020 1021
static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };

1022 1023 1024
static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };

1025 1026 1027
static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };

1028
#ifdef HAS_AUDIO
P
pbrook 已提交
1029
static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
1030 1031 1032
{
    struct soundhw *c;

M
malc 已提交
1033 1034 1035 1036 1037 1038 1039
    for (c = soundhw; c->name; ++c) {
        if (c->enabled) {
            if (c->isa) {
                c->init.init_isa(pic);
            } else {
                if (pci_bus) {
                    c->init.init_pci(pci_bus);
1040 1041 1042 1043 1044 1045 1046
                }
            }
        }
    }
}
#endif

J
Jes Sorensen 已提交
1047
static void pc_init_ne2k_isa(NICInfo *nd)
1048 1049 1050 1051 1052
{
    static int nb_ne2k = 0;

    if (nb_ne2k == NE2000_NB_MAX)
        return;
J
Jes Sorensen 已提交
1053 1054
    isa_ne2000_init(ne2000_io[nb_ne2k],
                    isa_reserve_irq(ne2000_irq[nb_ne2k]), nd);
1055 1056 1057
    nb_ne2k++;
}

1058 1059 1060 1061
static int load_option_rom(const char *oprom, target_phys_addr_t start,
                           target_phys_addr_t end)
{
        int size;
P
Paul Brook 已提交
1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075
        char *filename;

        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, oprom);
        if (filename) {
            size = get_image_size(filename);
            if (size > 0 && start + size > end) {
                fprintf(stderr, "Not enough space to load option rom '%s'\n",
                        oprom);
                exit(1);
            }
            size = load_image_targphys(filename, start, end - start);
            qemu_free(filename);
        } else {
            size = -1;
1076 1077 1078 1079 1080 1081 1082
        }
        if (size < 0) {
            fprintf(stderr, "Could not load option rom '%s'\n", oprom);
            exit(1);
        }
        /* Round up optiom rom size to the next 2k boundary */
        size = (size + 2047) & ~2047;
1083
        option_rom_setup_reset(start, size);
1084 1085 1086
        return size;
}

G
Gleb Natapov 已提交
1087 1088 1089 1090 1091
int cpu_is_bsp(CPUState *env)
{
	return env->cpuid_apic_id == 0;
}

J
Jan Kiszka 已提交
1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110
static CPUState *pc_new_cpu(const char *cpu_model)
{
    CPUState *env;

    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to find x86 CPU definition\n");
        exit(1);
    }
    if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
        env->cpuid_apic_id = env->cpu_index;
        /* APIC reset callback resets cpu */
        apic_init(env);
    } else {
        qemu_register_reset((QEMUResetHandler*)cpu_reset, env);
    }
    return env;
}

B
bellard 已提交
1111
/* PC hardware initialisation */
P
Paul Brook 已提交
1112
static void pc_init1(ram_addr_t ram_size,
1113
                     const char *boot_device,
1114 1115
                     const char *kernel_filename,
                     const char *kernel_cmdline,
1116
                     const char *initrd_filename,
1117
                     const char *cpu_model,
1118
                     int pci_enabled)
B
bellard 已提交
1119
{
P
Paul Brook 已提交
1120
    char *filename;
T
ths 已提交
1121
    int ret, linux_boot, i;
P
pbrook 已提交
1122
    ram_addr_t ram_addr, bios_offset, option_rom_offset;
1123
    ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
1124
    int bios_size, isa_bios_size, oprom_area_size;
B
bellard 已提交
1125
    PCIBus *pci_bus;
1126
    ISADevice *isa_dev;
P
pbrook 已提交
1127
    int piix3_devfn = -1;
1128
    CPUState *env;
P
pbrook 已提交
1129
    qemu_irq *cpu_irq;
1130
    qemu_irq *isa_irq;
P
pbrook 已提交
1131
    qemu_irq *i8259;
1132
    IsaIrqState *isa_irq_state;
G
Gerd Hoffmann 已提交
1133
    DriveInfo *dinfo;
1134
    DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
T
ths 已提交
1135
    BlockDriverState *fd[MAX_FD];
A
aliguori 已提交
1136
    int using_vga = cirrus_vga_enabled || std_vga_enabled || vmsvga_enabled;
A
Alexander Graf 已提交
1137
    void *fw_cfg;
1138

1139 1140 1141 1142 1143 1144 1145
    if (ram_size >= 0xe0000000 ) {
        above_4g_mem_size = ram_size - 0xe0000000;
        below_4g_mem_size = 0xe0000000;
    } else {
        below_4g_mem_size = ram_size;
    }

B
bellard 已提交
1146 1147
    linux_boot = (kernel_filename != NULL);

1148
    /* init CPUs */
1149 1150 1151 1152 1153 1154 1155
    if (cpu_model == NULL) {
#ifdef TARGET_X86_64
        cpu_model = "qemu64";
#else
        cpu_model = "qemu32";
#endif
    }
J
Jan Kiszka 已提交
1156 1157 1158

    for (i = 0; i < smp_cpus; i++) {
        env = pc_new_cpu(cpu_model);
1159 1160
    }

A
aurel32 已提交
1161 1162
    vmport_init();

B
bellard 已提交
1163
    /* allocate RAM */
1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175
    ram_addr = qemu_ram_alloc(0xa0000);
    cpu_register_physical_memory(0, 0xa0000, ram_addr);

    /* Allocate, even though we won't register, so we don't break the
     * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
     * and some bios areas, which will be registered later
     */
    ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
    ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
    cpu_register_physical_memory(0x100000,
                 below_4g_mem_size - 0x100000,
                 ram_addr);
1176 1177 1178

    /* above 4giga memory allocation */
    if (above_4g_mem_size > 0) {
1179 1180 1181
#if TARGET_PHYS_ADDR_BITS == 32
        hw_error("To much RAM for 32-bit physical address");
#else
1182 1183
        ram_addr = qemu_ram_alloc(above_4g_mem_size);
        cpu_register_physical_memory(0x100000000ULL,
1184
                                     above_4g_mem_size,
1185
                                     ram_addr);
1186
#endif
1187
    }
B
bellard 已提交
1188

1189

B
bellard 已提交
1190
    /* BIOS load */
1191 1192
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
P
Paul Brook 已提交
1193 1194 1195 1196 1197 1198
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
        bios_size = get_image_size(filename);
    } else {
        bios_size = -1;
    }
1199
    if (bios_size <= 0 ||
B
bellard 已提交
1200
        (bios_size % 65536) != 0) {
B
bellard 已提交
1201 1202
        goto bios_error;
    }
B
bellard 已提交
1203
    bios_offset = qemu_ram_alloc(bios_size);
P
Paul Brook 已提交
1204
    ret = load_image(filename, qemu_get_ram_ptr(bios_offset));
B
bellard 已提交
1205 1206
    if (ret != bios_size) {
    bios_error:
P
Paul Brook 已提交
1207
        fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
B
bellard 已提交
1208 1209
        exit(1);
    }
P
Paul Brook 已提交
1210 1211 1212
    if (filename) {
        qemu_free(filename);
    }
B
bellard 已提交
1213 1214 1215 1216
    /* map the last 128KB of the BIOS in ISA space */
    isa_bios_size = bios_size;
    if (isa_bios_size > (128 * 1024))
        isa_bios_size = 128 * 1024;
1217 1218
    cpu_register_physical_memory(0x100000 - isa_bios_size,
                                 isa_bios_size,
B
bellard 已提交
1219
                                 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
1220

1221

1222 1223 1224

    option_rom_offset = qemu_ram_alloc(0x20000);
    oprom_area_size = 0;
1225
    cpu_register_physical_memory(0xc0000, 0x20000, option_rom_offset);
1226 1227

    if (using_vga) {
P
Paul Brook 已提交
1228
        const char *vgabios_filename;
1229 1230
        /* VGA BIOS load */
        if (cirrus_vga_enabled) {
P
Paul Brook 已提交
1231
            vgabios_filename = VGABIOS_CIRRUS_FILENAME;
1232
        } else {
P
Paul Brook 已提交
1233
            vgabios_filename = VGABIOS_FILENAME;
B
bellard 已提交
1234
        }
P
Paul Brook 已提交
1235
        oprom_area_size = load_option_rom(vgabios_filename, 0xc0000, 0xe0000);
1236 1237 1238 1239 1240 1241 1242
    }
    /* Although video roms can grow larger than 0x8000, the area between
     * 0xc0000 - 0xc8000 is reserved for them. It means we won't be looking
     * for any other kind of option rom inside this area */
    if (oprom_area_size < 0x8000)
        oprom_area_size = 0x8000;

A
Alexander Graf 已提交
1243 1244 1245 1246
    /* map all the bios at the top of memory */
    cpu_register_physical_memory((uint32_t)(-bios_size),
                                 bios_size, bios_offset | IO_MEM_ROM);

A
Alexander Graf 已提交
1247
    fw_cfg = bochs_bios_init();
A
Alexander Graf 已提交
1248

1249
    if (linux_boot) {
A
Alexander Graf 已提交
1250
        load_linux(fw_cfg, 0xc0000 + oprom_area_size,
G
Glauber Costa 已提交
1251
                   kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
1252 1253 1254 1255
        oprom_area_size += 2048;
    }

    for (i = 0; i < nb_option_roms; i++) {
1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267
        oprom_area_size += load_option_rom(option_rom[i], 0xc0000 + oprom_area_size,
                                           0xe0000);
    }

    for (i = 0; i < nb_nics; i++) {
        char nic_oprom[1024];
        const char *model = nd_table[i].model;

        if (!nd_table[i].bootable)
            continue;

        if (model == NULL)
1268
            model = "e1000";
1269 1270 1271 1272
        snprintf(nic_oprom, sizeof(nic_oprom), "pxe-%s.bin", model);

        oprom_area_size += load_option_rom(nic_oprom, 0xc0000 + oprom_area_size,
                                           0xe0000);
1273 1274
    }

1275
    cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
P
pbrook 已提交
1276
    i8259 = i8259_init(cpu_irq[0]);
1277 1278
    isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
    isa_irq_state->i8259 = i8259;
A
Avi Kivity 已提交
1279
    isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
P
pbrook 已提交
1280

B
bellard 已提交
1281
    if (pci_enabled) {
1282
        pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq);
B
bellard 已提交
1283 1284
    } else {
        pci_bus = NULL;
G
Gerd Hoffmann 已提交
1285
        isa_bus_new(NULL);
B
bellard 已提交
1286
    }
G
Gerd Hoffmann 已提交
1287
    isa_bus_irqs(isa_irq);
B
bellard 已提交
1288

J
Jes Sorensen 已提交
1289 1290
    ferr_irq = isa_reserve_irq(13);

B
bellard 已提交
1291
    /* init basic PC hardware */
B
bellard 已提交
1292
    register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
B
bellard 已提交
1293

1294 1295
    register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);

B
bellard 已提交
1296 1297
    if (cirrus_vga_enabled) {
        if (pci_enabled) {
P
Paul Brook 已提交
1298
            pci_cirrus_vga_init(pci_bus);
B
bellard 已提交
1299
        } else {
P
Paul Brook 已提交
1300
            isa_cirrus_vga_init();
B
bellard 已提交
1301
        }
1302 1303
    } else if (vmsvga_enabled) {
        if (pci_enabled)
P
Paul Brook 已提交
1304
            pci_vmsvga_init(pci_bus);
1305 1306
        else
            fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1307
    } else if (std_vga_enabled) {
B
bellard 已提交
1308
        if (pci_enabled) {
P
Paul Brook 已提交
1309
            pci_vga_init(pci_bus, 0, 0);
B
bellard 已提交
1310
        } else {
P
Paul Brook 已提交
1311
            isa_vga_init();
B
bellard 已提交
1312
        }
B
bellard 已提交
1313
    }
B
bellard 已提交
1314

J
Jes Sorensen 已提交
1315
    rtc_state = rtc_init(0x70, isa_reserve_irq(8), 2000);
B
bellard 已提交
1316

1317 1318
    qemu_register_boot_set(pc_boot_set, rtc_state);

B
bellard 已提交
1319 1320 1321
    register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
    register_ioport_write(0x92, 1, 1, ioport92_write, NULL);

1322
    if (pci_enabled) {
A
Avi Kivity 已提交
1323
        isa_irq_state->ioapic = ioapic_init();
1324
    }
J
Jes Sorensen 已提交
1325
    pit = pit_init(0x40, isa_reserve_irq(0));
B
bellard 已提交
1326
    pcspk_init(pit);
A
aliguori 已提交
1327
    if (!no_hpet) {
1328
        hpet_init(isa_irq);
A
aliguori 已提交
1329
    }
B
bellard 已提交
1330

1331 1332
    for(i = 0; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
J
Jes Sorensen 已提交
1333
            serial_init(serial_io[i], isa_reserve_irq(serial_irq[i]), 115200,
A
aurel32 已提交
1334
                        serial_hds[i]);
1335 1336
        }
    }
B
bellard 已提交
1337

1338 1339
    for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
        if (parallel_hds[i]) {
J
Jes Sorensen 已提交
1340
            parallel_init(parallel_io[i], isa_reserve_irq(parallel_irq[i]),
P
pbrook 已提交
1341
                          parallel_hds[i]);
1342 1343 1344
        }
    }

1345
    for(i = 0; i < nb_nics; i++) {
1346 1347 1348
        NICInfo *nd = &nd_table[i];

        if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
J
Jes Sorensen 已提交
1349
            pc_init_ne2k_isa(nd);
1350
        else
1351
            pci_nic_init(nd, "e1000", NULL);
1352
    }
B
bellard 已提交
1353

1354
    piix4_acpi_system_hot_add_init();
1355

T
ths 已提交
1356 1357 1358 1359 1360 1361
    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }

    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1362
        hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
T
ths 已提交
1363 1364
    }

1365
    if (pci_enabled) {
1366
        pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
1367
    } else {
T
ths 已提交
1368
        for(i = 0; i < MAX_IDE_BUS; i++) {
J
Jes Sorensen 已提交
1369 1370
            isa_ide_init(ide_iobase[i], ide_iobase2[i],
                         isa_reserve_irq(ide_irq[i]),
T
ths 已提交
1371
	                 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
B
bellard 已提交
1372
        }
B
bellard 已提交
1373
    }
B
bellard 已提交
1374

1375
    isa_dev = isa_create_simple("i8042", 0x60, 0x64, 1, 12);
B
bellard 已提交
1376
    DMA_init(0);
1377
#ifdef HAS_AUDIO
1378
    audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
B
bellard 已提交
1379
#endif
B
bellard 已提交
1380

T
ths 已提交
1381
    for(i = 0; i < MAX_FD; i++) {
G
Gerd Hoffmann 已提交
1382 1383
        dinfo = drive_get(IF_FLOPPY, 0, i);
        fd[i] = dinfo ? dinfo->bdrv : NULL;
T
ths 已提交
1384
    }
G
Gerd Hoffmann 已提交
1385
    floppy_controller = fdctrl_init_isa(6, 2, 0x3f0, fd);
B
bellard 已提交
1386

1387
    cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
B
bellard 已提交
1388

B
bellard 已提交
1389
    if (pci_enabled && usb_enabled) {
T
ths 已提交
1390
        usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
B
bellard 已提交
1391 1392
    }

B
bellard 已提交
1393
    if (pci_enabled && acpi_enabled) {
1394
        uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
P
pbrook 已提交
1395 1396 1397
        i2c_bus *smbus;

        /* TODO: Populate SPD eeprom data.  */
J
Jes Sorensen 已提交
1398 1399
        smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
                              isa_reserve_irq(9));
1400
        for (i = 0; i < 8; i++) {
P
Paul Brook 已提交
1401
            DeviceState *eeprom;
P
Paul Brook 已提交
1402
            eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
G
Gerd Hoffmann 已提交
1403 1404
            qdev_prop_set_uint32(eeprom, "address", 0x50 + i);
            qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
P
Paul Brook 已提交
1405
            qdev_init(eeprom);
1406
        }
B
bellard 已提交
1407
    }
1408

B
bellard 已提交
1409 1410 1411
    if (i440fx_state) {
        i440fx_init_memory_mappings(i440fx_state);
    }
T
ths 已提交
1412

P
pbrook 已提交
1413
    if (pci_enabled) {
T
ths 已提交
1414
	int max_bus;
P
Paul Brook 已提交
1415
        int bus;
1416

T
ths 已提交
1417 1418
        max_bus = drive_get_max_bus(IF_SCSI);
	for (bus = 0; bus <= max_bus; bus++) {
P
Paul Brook 已提交
1419
            pci_create_simple(pci_bus, -1, "lsi53c895a");
T
ths 已提交
1420
        }
P
pbrook 已提交
1421
    }
A
aliguori 已提交
1422

1423 1424 1425
    /* Add virtio console devices */
    if (pci_enabled) {
        for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
P
Paul Brook 已提交
1426
            if (virtcon_hds[i]) {
1427
                pci_create_simple(pci_bus, -1, "virtio-console-pci");
P
Paul Brook 已提交
1428
            }
1429 1430
        }
    }
B
bellard 已提交
1431
}
B
bellard 已提交
1432

P
Paul Brook 已提交
1433
static void pc_init_pci(ram_addr_t ram_size,
1434
                        const char *boot_device,
1435
                        const char *kernel_filename,
1436
                        const char *kernel_cmdline,
1437 1438
                        const char *initrd_filename,
                        const char *cpu_model)
1439
{
P
Paul Brook 已提交
1440
    pc_init1(ram_size, boot_device,
1441
             kernel_filename, kernel_cmdline,
1442
             initrd_filename, cpu_model, 1);
1443 1444
}

P
Paul Brook 已提交
1445
static void pc_init_isa(ram_addr_t ram_size,
1446
                        const char *boot_device,
1447
                        const char *kernel_filename,
1448
                        const char *kernel_cmdline,
1449 1450
                        const char *initrd_filename,
                        const char *cpu_model)
1451
{
P
Paul Brook 已提交
1452
    pc_init1(ram_size, boot_device,
1453
             kernel_filename, kernel_cmdline,
1454
             initrd_filename, cpu_model, 0);
1455 1456
}

A
aliguori 已提交
1457 1458 1459 1460 1461 1462 1463 1464
/* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
   BIOS will read it and start S3 resume at POST Entry */
void cmos_set_s3_resume(void)
{
    if (rtc_state)
        rtc_set_memory(rtc_state, 0xF, 0xFE);
}

1465
static QEMUMachine pc_machine = {
1466 1467
    .name = "pc-0.11",
    .alias = "pc",
A
aurel32 已提交
1468 1469
    .desc = "Standard PC",
    .init = pc_init_pci,
1470
    .max_cpus = 255,
1471
    .is_default = 1,
1472 1473
};

1474 1475 1476 1477 1478 1479
static QEMUMachine pc_machine_v0_10 = {
    .name = "pc-0.10",
    .desc = "Standard PC, qemu 0.10",
    .init = pc_init_pci,
    .max_cpus = 255,
    .compat_props = (CompatProperty[]) {
1480 1481 1482 1483
        {
            .driver   = "virtio-blk-pci",
            .property = "class",
            .value    = stringify(PCI_CLASS_STORAGE_OTHER),
1484 1485 1486 1487
        },{
            .driver   = "virtio-console-pci",
            .property = "class",
            .value    = stringify(PCI_CLASS_DISPLAY_OTHER),
1488 1489 1490 1491
        },{
            .driver   = "virtio-net-pci",
            .property = "vectors",
            .value    = stringify(0),
G
Gerd Hoffmann 已提交
1492 1493 1494 1495
        },{
            .driver   = "virtio-blk-pci",
            .property = "vectors",
            .value    = stringify(0),
1496
        },
1497 1498 1499 1500
        { /* end of list */ }
    },
};

1501
static QEMUMachine isapc_machine = {
A
aurel32 已提交
1502 1503 1504
    .name = "isapc",
    .desc = "ISA-only PC",
    .init = pc_init_isa,
1505
    .max_cpus = 1,
B
bellard 已提交
1506
};
1507 1508 1509 1510

static void pc_machine_init(void)
{
    qemu_register_machine(&pc_machine);
1511
    qemu_register_machine(&pc_machine_v0_10);
1512 1513 1514 1515
    qemu_register_machine(&isapc_machine);
}

machine_init(pc_machine_init);