pc.c 27.6 KB
Newer Older
B
bellard 已提交
1 2
/*
 * QEMU PC System Emulator
3
 *
B
bellard 已提交
4
 * Copyright (c) 2003-2004 Fabrice Bellard
5
 *
B
bellard 已提交
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#include "vl.h"

B
bellard 已提交
26 27 28
/* output Bochs bios info messages */
//#define DEBUG_BIOS

B
bellard 已提交
29 30
#define BIOS_FILENAME "bios.bin"
#define VGABIOS_FILENAME "vgabios.bin"
B
bellard 已提交
31
#define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
B
bellard 已提交
32

33 34
/* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */
#define ACPI_DATA_SIZE       0x10000
B
bellard 已提交
35

36
static fdctrl_t *floppy_controller;
B
bellard 已提交
37
static RTCState *rtc_state;
B
bellard 已提交
38
static PITState *pit;
39
static IOAPICState *ioapic;
B
bellard 已提交
40
static PCIDevice *i440fx_state;
B
bellard 已提交
41

B
bellard 已提交
42
static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
B
bellard 已提交
43 44 45
{
}

46
/* MSDOS compatibility mode FPU exception support */
P
pbrook 已提交
47
static qemu_irq ferr_irq;
48 49 50
/* XXX: add IGNNE support */
void cpu_set_ferr(CPUX86State *s)
{
P
pbrook 已提交
51
    qemu_irq_raise(ferr_irq);
52 53 54 55
}

static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
{
P
pbrook 已提交
56
    qemu_irq_lower(ferr_irq);
57 58
}

B
bellard 已提交
59 60 61
/* TSC handling */
uint64_t cpu_get_tsc(CPUX86State *env)
{
62 63 64 65 66 67
    /* Note: when using kqemu, it is more logical to return the host TSC
       because kqemu does not trap the RDTSC instruction for
       performance reasons */
#if USE_KQEMU
    if (env->kqemu_enabled) {
        return cpu_get_real_ticks();
68
    } else
69 70 71 72
#endif
    {
        return cpu_get_ticks();
    }
B
bellard 已提交
73 74
}

B
bellard 已提交
75 76 77 78 79 80 81 82
/* SMM support */
void cpu_smm_update(CPUState *env)
{
    if (i440fx_state && env == first_cpu)
        i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
}


B
bellard 已提交
83 84 85 86 87 88 89 90 91
/* IRQ handling */
int cpu_get_pic_interrupt(CPUState *env)
{
    int intno;

    intno = apic_get_interrupt(env);
    if (intno >= 0) {
        /* set irq request if a PIC irq is still pending */
        /* XXX: improve that */
92
        pic_update_irq(isa_pic);
B
bellard 已提交
93 94 95
        return intno;
    }
    /* read the irq from the PIC */
96 97 98
    if (!apic_accept_pic_intr(env))
        return -1;

B
bellard 已提交
99 100 101 102
    intno = pic_read_irq(isa_pic);
    return intno;
}

P
pbrook 已提交
103
static void pic_irq_request(void *opaque, int irq, int level)
B
bellard 已提交
104
{
105
    CPUState *env = opaque;
106
    if (level && apic_accept_pic_intr(env))
107
        cpu_interrupt(env, CPU_INTERRUPT_HARD);
B
bellard 已提交
108 109
}

B
bellard 已提交
110 111
/* PC cmos mappings */

B
bellard 已提交
112 113
#define REG_EQUIPMENT_BYTE          0x14

114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137
static int cmos_get_fd_drive_type(int fd0)
{
    int val;

    switch (fd0) {
    case 0:
        /* 1.44 Mb 3"5 drive */
        val = 4;
        break;
    case 1:
        /* 2.88 Mb 3"5 drive */
        val = 5;
        break;
    case 2:
        /* 1.2 Mb 5"5 drive */
        val = 2;
        break;
    default:
        val = 0;
        break;
    }
    return val;
}

138
static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
B
bellard 已提交
139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156
{
    RTCState *s = rtc_state;
    int cylinders, heads, sectors;
    bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
    rtc_set_memory(s, type_ofs, 47);
    rtc_set_memory(s, info_ofs, cylinders);
    rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
    rtc_set_memory(s, info_ofs + 2, heads);
    rtc_set_memory(s, info_ofs + 3, 0xff);
    rtc_set_memory(s, info_ofs + 4, 0xff);
    rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
    rtc_set_memory(s, info_ofs + 6, cylinders);
    rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
    rtc_set_memory(s, info_ofs + 8, sectors);
}

/* hd_table must contain 4 block drivers */
static void cmos_init(int ram_size, int boot_device, BlockDriverState **hd_table)
B
bellard 已提交
157
{
B
bellard 已提交
158
    RTCState *s = rtc_state;
B
bellard 已提交
159
    int val;
B
bellard 已提交
160
    int fd0, fd1, nb;
B
bellard 已提交
161
    int i;
B
bellard 已提交
162 163

    /* various important CMOS locations needed by PC/Bochs bios */
B
bellard 已提交
164 165

    /* memory size */
B
bellard 已提交
166 167 168 169
    val = 640; /* base memory in K */
    rtc_set_memory(s, 0x15, val);
    rtc_set_memory(s, 0x16, val >> 8);

B
bellard 已提交
170 171 172
    val = (ram_size / 1024) - 1024;
    if (val > 65535)
        val = 65535;
B
bellard 已提交
173 174 175 176
    rtc_set_memory(s, 0x17, val);
    rtc_set_memory(s, 0x18, val >> 8);
    rtc_set_memory(s, 0x30, val);
    rtc_set_memory(s, 0x31, val >> 8);
B
bellard 已提交
177

B
bellard 已提交
178 179 180 181
    if (ram_size > (16 * 1024 * 1024))
        val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
    else
        val = 0;
B
bellard 已提交
182 183
    if (val > 65535)
        val = 65535;
B
bellard 已提交
184 185
    rtc_set_memory(s, 0x34, val);
    rtc_set_memory(s, 0x35, val >> 8);
186

B
bellard 已提交
187 188 189
    switch(boot_device) {
    case 'a':
    case 'b':
B
bellard 已提交
190
        rtc_set_memory(s, 0x3d, 0x01); /* floppy boot */
B
bellard 已提交
191 192
        if (!fd_bootchk)
            rtc_set_memory(s, 0x38, 0x01); /* disable signature check */
B
bellard 已提交
193 194 195
        break;
    default:
    case 'c':
B
bellard 已提交
196
        rtc_set_memory(s, 0x3d, 0x02); /* hard drive boot */
B
bellard 已提交
197 198
        break;
    case 'd':
B
bellard 已提交
199
        rtc_set_memory(s, 0x3d, 0x03); /* CD-ROM boot */
B
bellard 已提交
200
        break;
201 202
    case 'n':
        rtc_set_memory(s, 0x3d, 0x04); /* Network boot */
203
        break;
B
bellard 已提交
204 205
    }

B
bellard 已提交
206 207
    /* floppy type */

208 209
    fd0 = fdctrl_get_drive_type(floppy_controller, 0);
    fd1 = fdctrl_get_drive_type(floppy_controller, 1);
B
bellard 已提交
210

211
    val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
B
bellard 已提交
212
    rtc_set_memory(s, 0x10, val);
213

B
bellard 已提交
214
    val = 0;
B
bellard 已提交
215
    nb = 0;
B
bellard 已提交
216 217 218 219 220 221 222 223
    if (fd0 < 3)
        nb++;
    if (fd1 < 3)
        nb++;
    switch (nb) {
    case 0:
        break;
    case 1:
B
bellard 已提交
224
        val |= 0x01; /* 1 drive, ready for boot */
B
bellard 已提交
225 226
        break;
    case 2:
B
bellard 已提交
227
        val |= 0x41; /* 2 drives, ready for boot */
B
bellard 已提交
228 229
        break;
    }
B
bellard 已提交
230 231 232 233
    val |= 0x02; /* FPU is there */
    val |= 0x04; /* PS/2 mouse installed */
    rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);

B
bellard 已提交
234 235 236 237 238
    /* hard drives */

    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
    if (hd_table[0])
        cmos_init_hd(0x19, 0x1b, hd_table[0]);
239
    if (hd_table[1])
B
bellard 已提交
240 241 242
        cmos_init_hd(0x1a, 0x24, hd_table[1]);

    val = 0;
B
bellard 已提交
243
    for (i = 0; i < 4; i++) {
B
bellard 已提交
244
        if (hd_table[i]) {
B
bellard 已提交
245 246 247 248 249 250 251 252 253 254 255 256 257 258 259
            int cylinders, heads, sectors, translation;
            /* NOTE: bdrv_get_geometry_hint() returns the physical
                geometry.  It is always such that: 1 <= sects <= 63, 1
                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
                geometry can be different if a translation is done. */
            translation = bdrv_get_translation_hint(hd_table[i]);
            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
                bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
                    /* No translation. */
                    translation = 0;
                } else {
                    /* LBA translation. */
                    translation = 1;
                }
B
bellard 已提交
260
            } else {
B
bellard 已提交
261
                translation--;
B
bellard 已提交
262 263 264
            }
            val |= translation << (i * 2);
        }
B
bellard 已提交
265
    }
B
bellard 已提交
266
    rtc_set_memory(s, 0x39, val);
B
bellard 已提交
267 268
}

269 270 271 272 273 274 275 276 277 278 279
void ioport_set_a20(int enable)
{
    /* XXX: send to all CPUs ? */
    cpu_x86_set_a20(first_cpu, enable);
}

int ioport_get_a20(void)
{
    return ((first_cpu->a20_mask >> 20) & 1);
}

B
bellard 已提交
280 281
static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
{
282
    ioport_set_a20((val >> 1) & 1);
B
bellard 已提交
283 284 285 286 287
    /* XXX: bit 0 is fast reset */
}

static uint32_t ioport92_read(void *opaque, uint32_t addr)
{
288
    return ioport_get_a20() << 1;
B
bellard 已提交
289 290
}

B
bellard 已提交
291 292 293
/***********************************************************/
/* Bochs BIOS debug ports */

B
bellard 已提交
294
void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
B
bellard 已提交
295
{
B
bellard 已提交
296 297
    static const char shutdown_str[8] = "Shutdown";
    static int shutdown_index = 0;
298

B
bellard 已提交
299 300 301 302 303 304 305 306 307 308 309 310
    switch(addr) {
        /* Bochs BIOS messages */
    case 0x400:
    case 0x401:
        fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
        exit(1);
    case 0x402:
    case 0x403:
#ifdef DEBUG_BIOS
        fprintf(stderr, "%c", val);
#endif
        break;
B
bellard 已提交
311 312 313 314 315 316 317 318 319 320 321 322
    case 0x8900:
        /* same as Bochs power off */
        if (val == shutdown_str[shutdown_index]) {
            shutdown_index++;
            if (shutdown_index == 8) {
                shutdown_index = 0;
                qemu_system_shutdown_request();
            }
        } else {
            shutdown_index = 0;
        }
        break;
B
bellard 已提交
323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339

        /* LGPL'ed VGA BIOS messages */
    case 0x501:
    case 0x502:
        fprintf(stderr, "VGA BIOS panic, line %d\n", val);
        exit(1);
    case 0x500:
    case 0x503:
#ifdef DEBUG_BIOS
        fprintf(stderr, "%c", val);
#endif
        break;
    }
}

void bochs_bios_init(void)
{
B
bellard 已提交
340 341 342 343
    register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
    register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
B
bellard 已提交
344
    register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
B
bellard 已提交
345 346 347 348 349

    register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
    register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
    register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
B
bellard 已提交
350 351
}

T
ths 已提交
352 353
/* Generate an initial boot sector which sets state and jump to
   a specified vector */
354
static void generate_bootsect(uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
T
ths 已提交
355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406
{
    uint8_t bootsect[512], *p;
    int i;

    if (bs_table[0] == NULL) {
	fprintf(stderr, "A disk image must be given for 'hda' when booting "
		"a Linux kernel\n");
	exit(1);
    }

    memset(bootsect, 0, sizeof(bootsect));

    /* Copy the MSDOS partition table if possible */
    bdrv_read(bs_table[0], 0, bootsect, 1);

    /* Make sure we have a partition signature */
    bootsect[510] = 0x55;
    bootsect[511] = 0xaa;

    /* Actual code */
    p = bootsect;
    *p++ = 0xfa;		/* CLI */
    *p++ = 0xfc;		/* CLD */

    for (i = 0; i < 6; i++) {
	if (i == 1)		/* Skip CS */
	    continue;

	*p++ = 0xb8;		/* MOV AX,imm16 */
	*p++ = segs[i];
	*p++ = segs[i] >> 8;
	*p++ = 0x8e;		/* MOV <seg>,AX */
	*p++ = 0xc0 + (i << 3);
    }

    for (i = 0; i < 8; i++) {
	*p++ = 0x66;		/* 32-bit operand size */
	*p++ = 0xb8 + i;	/* MOV <reg>,imm32 */
	*p++ = gpr[i];
	*p++ = gpr[i] >> 8;
	*p++ = gpr[i] >> 16;
	*p++ = gpr[i] >> 24;
    }

    *p++ = 0xea;		/* JMP FAR */
    *p++ = ip;			/* IP */
    *p++ = ip >> 8;
    *p++ = segs[1];		/* CS */
    *p++ = segs[1] >> 8;

    bdrv_set_boot_sector(bs_table[0], bootsect, sizeof(bootsect));
}
B
bellard 已提交
407

408
int load_kernel(const char *filename, uint8_t *addr,
B
bellard 已提交
409 410 411 412 413
                uint8_t *real_addr)
{
    int fd, size;
    int setup_sects;

B
bellard 已提交
414
    fd = open(filename, O_RDONLY | O_BINARY);
B
bellard 已提交
415 416 417 418 419 420 421 422 423
    if (fd < 0)
        return -1;

    /* load 16 bit code */
    if (read(fd, real_addr, 512) != 512)
        goto fail;
    setup_sects = real_addr[0x1F1];
    if (!setup_sects)
        setup_sects = 4;
424
    if (read(fd, real_addr + 512, setup_sects * 512) !=
B
bellard 已提交
425 426
        setup_sects * 512)
        goto fail;
T
ths 已提交
427

B
bellard 已提交
428 429 430 431 432 433 434 435 436 437 438
    /* load 32 bit code */
    size = read(fd, addr, 16 * 1024 * 1024);
    if (size < 0)
        goto fail;
    close(fd);
    return size;
 fail:
    close(fd);
    return -1;
}

T
ths 已提交
439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601
static long get_file_size(FILE *f)
{
    long where, size;

    /* XXX: on Unix systems, using fstat() probably makes more sense */

    where = ftell(f);
    fseek(f, 0, SEEK_END);
    size = ftell(f);
    fseek(f, where, SEEK_SET);

    return size;
}

static void load_linux(const char *kernel_filename,
		       const char *initrd_filename,
		       const char *kernel_cmdline)
{
    uint16_t protocol;
    uint32_t gpr[8];
    uint16_t seg[6];
    uint16_t real_seg;
    int setup_size, kernel_size, initrd_size, cmdline_size;
    uint32_t initrd_max;
    uint8_t header[1024];
    uint8_t *real_addr, *prot_addr, *cmdline_addr, *initrd_addr;
    FILE *f, *fi;

    /* Align to 16 bytes as a paranoia measure */
    cmdline_size = (strlen(kernel_cmdline)+16) & ~15;

    /* load the kernel header */
    f = fopen(kernel_filename, "rb");
    if (!f || !(kernel_size = get_file_size(f)) ||
	fread(header, 1, 1024, f) != 1024) {
	fprintf(stderr, "qemu: could not load kernel '%s'\n",
		kernel_filename);
	exit(1);
    }

    /* kernel protocol version */
    fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
    if (ldl_p(header+0x202) == 0x53726448)
	protocol = lduw_p(header+0x206);
    else
	protocol = 0;

    if (protocol < 0x200 || !(header[0x211] & 0x01)) {
	/* Low kernel */
	real_addr    = phys_ram_base + 0x90000;
	cmdline_addr = phys_ram_base + 0x9a000 - cmdline_size;
	prot_addr    = phys_ram_base + 0x10000;
    } else if (protocol < 0x202) {
	/* High but ancient kernel */
	real_addr    = phys_ram_base + 0x90000;
	cmdline_addr = phys_ram_base + 0x9a000 - cmdline_size;
	prot_addr    = phys_ram_base + 0x100000;
    } else {
	/* High and recent kernel */
	real_addr    = phys_ram_base + 0x10000;
	cmdline_addr = phys_ram_base + 0x20000;
	prot_addr    = phys_ram_base + 0x100000;
    }

    fprintf(stderr,
	    "qemu: real_addr     = %#zx\n"
	    "qemu: cmdline_addr  = %#zx\n"
	    "qemu: prot_addr     = %#zx\n",
	    real_addr-phys_ram_base,
	    cmdline_addr-phys_ram_base,
	    prot_addr-phys_ram_base);

    /* highest address for loading the initrd */
    if (protocol >= 0x203)
	initrd_max = ldl_p(header+0x22c);
    else
	initrd_max = 0x37ffffff;

    if (initrd_max >= ram_size-ACPI_DATA_SIZE)
	initrd_max = ram_size-ACPI_DATA_SIZE-1;

    /* kernel command line */
    pstrcpy(cmdline_addr, 4096, kernel_cmdline);

    if (protocol >= 0x202) {
	stl_p(header+0x228, cmdline_addr-phys_ram_base);
    } else {
	stw_p(header+0x20, 0xA33F);
	stw_p(header+0x22, cmdline_addr-real_addr);
    }

    /* loader type */
    /* High nybble = B reserved for Qemu; low nybble is revision number.
       If this code is substantially changed, you may want to consider
       incrementing the revision. */
    if (protocol >= 0x200)
	header[0x210] = 0xB0;

    /* heap */
    if (protocol >= 0x201) {
	header[0x211] |= 0x80;	/* CAN_USE_HEAP */
	stw_p(header+0x224, cmdline_addr-real_addr-0x200);
    }

    /* load initrd */
    if (initrd_filename) {
	if (protocol < 0x200) {
	    fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
	    exit(1);
	}

	fi = fopen(initrd_filename, "rb");
	if (!fi) {
	    fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
		    initrd_filename);
	    exit(1);
	}

	initrd_size = get_file_size(fi);
	initrd_addr = phys_ram_base + ((initrd_max-initrd_size) & ~4095);

	fprintf(stderr, "qemu: loading initrd (%#x bytes) at %#zx\n",
		initrd_size, initrd_addr-phys_ram_base);

	if (fread(initrd_addr, 1, initrd_size, fi) != initrd_size) {
	    fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
		    initrd_filename);
	    exit(1);
	}
	fclose(fi);

	stl_p(header+0x218, initrd_addr-phys_ram_base);
	stl_p(header+0x21c, initrd_size);
    }

    /* store the finalized header and load the rest of the kernel */
    memcpy(real_addr, header, 1024);

    setup_size = header[0x1f1];
    if (setup_size == 0)
	setup_size = 4;

    setup_size = (setup_size+1)*512;
    kernel_size -= setup_size;	/* Size of protected-mode code */

    if (fread(real_addr+1024, 1, setup_size-1024, f) != setup_size-1024 ||
	fread(prot_addr, 1, kernel_size, f) != kernel_size) {
	fprintf(stderr, "qemu: read error on kernel '%s'\n",
		kernel_filename);
	exit(1);
    }
    fclose(f);

    /* generate bootsector to set up the initial register state */
    real_seg = (real_addr-phys_ram_base) >> 4;
    seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
    seg[1] = real_seg+0x20;	/* CS */
    memset(gpr, 0, sizeof gpr);
    gpr[4] = cmdline_addr-real_addr-16;	/* SP (-16 is paranoia) */

    generate_bootsect(gpr, seg, 0);
}

602 603 604 605 606 607
static void main_cpu_reset(void *opaque)
{
    CPUState *env = opaque;
    cpu_reset(env);
}

B
bellard 已提交
608 609 610 611 612 613
static const int ide_iobase[2] = { 0x1f0, 0x170 };
static const int ide_iobase2[2] = { 0x3f6, 0x376 };
static const int ide_irq[2] = { 14, 15 };

#define NE2000_NB_MAX 6

614
static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
B
bellard 已提交
615 616
static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };

617 618 619
static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };

620 621 622
static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };

623
#ifdef HAS_AUDIO
P
pbrook 已提交
624
static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640
{
    struct soundhw *c;
    int audio_enabled = 0;

    for (c = soundhw; !audio_enabled && c->name; ++c) {
        audio_enabled = c->enabled;
    }

    if (audio_enabled) {
        AudioState *s;

        s = AUD_init ();
        if (s) {
            for (c = soundhw; c->name; ++c) {
                if (c->enabled) {
                    if (c->isa) {
P
pbrook 已提交
641
                        c->init.init_isa (s, pic);
642 643 644 645 646 647 648 649 650 651 652 653 654
                    }
                    else {
                        if (pci_bus) {
                            c->init.init_pci (pci_bus, s);
                        }
                    }
                }
            }
        }
    }
}
#endif

P
pbrook 已提交
655
static void pc_init_ne2k_isa(NICInfo *nd, qemu_irq *pic)
656 657 658 659 660
{
    static int nb_ne2k = 0;

    if (nb_ne2k == NE2000_NB_MAX)
        return;
P
pbrook 已提交
661
    isa_ne2000_init(ne2000_io[nb_ne2k], pic[ne2000_irq[nb_ne2k]], nd);
662 663 664
    nb_ne2k++;
}

B
bellard 已提交
665
/* PC hardware initialisation */
B
bellard 已提交
666 667 668
static void pc_init1(int ram_size, int vga_ram_size, int boot_device,
                     DisplayState *ds, const char **fd_filename, int snapshot,
                     const char *kernel_filename, const char *kernel_cmdline,
669 670
                     const char *initrd_filename,
                     int pci_enabled)
B
bellard 已提交
671 672
{
    char buf[1024];
T
ths 已提交
673
    int ret, linux_boot, i;
B
bellard 已提交
674 675
    ram_addr_t ram_addr, vga_ram_addr, bios_offset, vga_bios_offset;
    int bios_size, isa_bios_size, vga_bios_size;
B
bellard 已提交
676
    PCIBus *pci_bus;
P
pbrook 已提交
677
    int piix3_devfn = -1;
678
    CPUState *env;
679
    NICInfo *nd;
P
pbrook 已提交
680 681
    qemu_irq *cpu_irq;
    qemu_irq *i8259;
682

B
bellard 已提交
683 684
    linux_boot = (kernel_filename != NULL);

685 686 687 688
    /* init CPUs */
    for(i = 0; i < smp_cpus; i++) {
        env = cpu_init();
        if (i != 0)
B
bellard 已提交
689
            env->hflags |= HF_HALTED_MASK;
690 691 692 693
        if (smp_cpus > 1) {
            /* XXX: enable it in all cases */
            env->cpuid_features |= CPUID_APIC;
        }
B
bellard 已提交
694
        register_savevm("cpu", i, 4, cpu_save, cpu_load, env);
695 696 697 698
        qemu_register_reset(main_cpu_reset, env);
        if (pci_enabled) {
            apic_init(env);
        }
699
        vmport_init(env);
700 701
    }

B
bellard 已提交
702
    /* allocate RAM */
B
bellard 已提交
703 704
    ram_addr = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(0, ram_size, ram_addr);
B
bellard 已提交
705

B
bellard 已提交
706 707
    /* allocate VGA RAM */
    vga_ram_addr = qemu_ram_alloc(vga_ram_size);
B
bellard 已提交
708

B
bellard 已提交
709
    /* BIOS load */
710 711 712
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
B
bellard 已提交
713
    bios_size = get_image_size(buf);
714
    if (bios_size <= 0 ||
B
bellard 已提交
715
        (bios_size % 65536) != 0) {
B
bellard 已提交
716 717
        goto bios_error;
    }
B
bellard 已提交
718
    bios_offset = qemu_ram_alloc(bios_size);
B
bellard 已提交
719 720 721
    ret = load_image(buf, phys_ram_base + bios_offset);
    if (ret != bios_size) {
    bios_error:
B
bellard 已提交
722
        fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", buf);
B
bellard 已提交
723 724
        exit(1);
    }
B
bellard 已提交
725

B
bellard 已提交
726
    /* VGA BIOS load */
B
bellard 已提交
727 728 729 730 731
    if (cirrus_vga_enabled) {
        snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_CIRRUS_FILENAME);
    } else {
        snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
    }
B
bellard 已提交
732
    vga_bios_size = get_image_size(buf);
733
    if (vga_bios_size <= 0 || vga_bios_size > 65536)
B
bellard 已提交
734 735 736
        goto vga_bios_error;
    vga_bios_offset = qemu_ram_alloc(65536);

B
bellard 已提交
737
    ret = load_image(buf, phys_ram_base + vga_bios_offset);
B
bellard 已提交
738 739 740 741 742 743
    if (ret != vga_bios_size) {
    vga_bios_error:
        fprintf(stderr, "qemu: could not load VGA BIOS '%s'\n", buf);
        exit(1);
    }

B
bellard 已提交
744
    /* setup basic memory access */
745
    cpu_register_physical_memory(0xc0000, 0x10000,
B
bellard 已提交
746 747 748 749 750 751
                                 vga_bios_offset | IO_MEM_ROM);

    /* map the last 128KB of the BIOS in ISA space */
    isa_bios_size = bios_size;
    if (isa_bios_size > (128 * 1024))
        isa_bios_size = 128 * 1024;
752
    cpu_register_physical_memory(0xd0000, (192 * 1024) - isa_bios_size,
B
bellard 已提交
753
                                 IO_MEM_UNASSIGNED);
754 755
    cpu_register_physical_memory(0x100000 - isa_bios_size,
                                 isa_bios_size,
B
bellard 已提交
756
                                 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
757

B
bellard 已提交
758 759 760 761 762 763 764 765
    {
        ram_addr_t option_rom_offset;
        int size, offset;

        offset = 0;
        for (i = 0; i < nb_option_roms; i++) {
            size = get_image_size(option_rom[i]);
            if (size < 0) {
766
                fprintf(stderr, "Could not load option rom '%s'\n",
B
bellard 已提交
767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783
                        option_rom[i]);
                exit(1);
            }
            if (size > (0x10000 - offset))
                goto option_rom_error;
            option_rom_offset = qemu_ram_alloc(size);
            ret = load_image(option_rom[i], phys_ram_base + option_rom_offset);
            if (ret != size) {
            option_rom_error:
                fprintf(stderr, "Too many option ROMS\n");
                exit(1);
            }
            size = (size + 4095) & ~4095;
            cpu_register_physical_memory(0xd0000 + offset,
                                         size, option_rom_offset | IO_MEM_ROM);
            offset += size;
        }
784 785
    }

B
bellard 已提交
786
    /* map all the bios at the top of memory */
787
    cpu_register_physical_memory((uint32_t)(-bios_size),
B
bellard 已提交
788
                                 bios_size, bios_offset | IO_MEM_ROM);
789

B
bellard 已提交
790 791
    bochs_bios_init();

T
ths 已提交
792 793
    if (linux_boot)
	load_linux(kernel_filename, initrd_filename, kernel_cmdline);
B
bellard 已提交
794

P
pbrook 已提交
795 796 797 798
    cpu_irq = qemu_allocate_irqs(pic_irq_request, first_cpu, 1);
    i8259 = i8259_init(cpu_irq[0]);
    ferr_irq = i8259[13];

B
bellard 已提交
799
    if (pci_enabled) {
P
pbrook 已提交
800
        pci_bus = i440fx_init(&i440fx_state, i8259);
801
        piix3_devfn = piix3_init(pci_bus, -1);
B
bellard 已提交
802 803
    } else {
        pci_bus = NULL;
B
bellard 已提交
804 805
    }

B
bellard 已提交
806
    /* init basic PC hardware */
B
bellard 已提交
807
    register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
B
bellard 已提交
808

809 810
    register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);

B
bellard 已提交
811 812
    if (cirrus_vga_enabled) {
        if (pci_enabled) {
813 814
            pci_cirrus_vga_init(pci_bus,
                                ds, phys_ram_base + vga_ram_addr,
B
bellard 已提交
815
                                vga_ram_addr, vga_ram_size);
B
bellard 已提交
816
        } else {
817
            isa_cirrus_vga_init(ds, phys_ram_base + vga_ram_addr,
B
bellard 已提交
818
                                vga_ram_addr, vga_ram_size);
B
bellard 已提交
819
        }
820 821 822 823 824 825
    } else if (vmsvga_enabled) {
        if (pci_enabled)
            pci_vmsvga_init(pci_bus, ds, phys_ram_base + ram_size,
                            ram_size, vga_ram_size);
        else
            fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
B
bellard 已提交
826
    } else {
B
bellard 已提交
827
        if (pci_enabled) {
828
            pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
B
bellard 已提交
829
                         vga_ram_addr, vga_ram_size, 0, 0);
B
bellard 已提交
830
        } else {
831
            isa_vga_init(ds, phys_ram_base + vga_ram_addr,
B
bellard 已提交
832
                         vga_ram_addr, vga_ram_size);
B
bellard 已提交
833
        }
B
bellard 已提交
834
    }
B
bellard 已提交
835

P
pbrook 已提交
836
    rtc_state = rtc_init(0x70, i8259[8]);
B
bellard 已提交
837

B
bellard 已提交
838 839 840
    register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
    register_ioport_write(0x92, 1, 1, ioport92_write, NULL);

841 842 843
    if (pci_enabled) {
        ioapic = ioapic_init();
    }
P
pbrook 已提交
844
    pit = pit_init(0x40, i8259[0]);
B
bellard 已提交
845
    pcspk_init(pit);
846 847 848
    if (pci_enabled) {
        pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
    }
B
bellard 已提交
849

850 851
    for(i = 0; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
P
pbrook 已提交
852
            serial_init(serial_io[i], i8259[serial_irq[i]], serial_hds[i]);
853 854
        }
    }
B
bellard 已提交
855

856 857
    for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
        if (parallel_hds[i]) {
P
pbrook 已提交
858 859
            parallel_init(parallel_io[i], i8259[parallel_irq[i]],
                          parallel_hds[i]);
860 861 862
        }
    }

863 864 865 866 867 868 869 870
    for(i = 0; i < nb_nics; i++) {
        nd = &nd_table[i];
        if (!nd->model) {
            if (pci_enabled) {
                nd->model = "ne2k_pci";
            } else {
                nd->model = "ne2k_isa";
            }
B
bellard 已提交
871
        }
872
        if (strcmp(nd->model, "ne2k_isa") == 0) {
P
pbrook 已提交
873
            pc_init_ne2k_isa(nd, i8259);
874
        } else if (pci_enabled) {
875 876
            if (strcmp(nd->model, "?") == 0)
                fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
877
            pci_nic_init(pci_bus, nd, -1);
878 879 880
        } else if (strcmp(nd->model, "?") == 0) {
            fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
            exit(1);
881 882 883
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
B
bellard 已提交
884
        }
885
    }
B
bellard 已提交
886

887
    if (pci_enabled) {
P
pbrook 已提交
888
        pci_piix3_ide_init(pci_bus, bs_table, piix3_devfn + 1, i8259);
889
    } else {
B
bellard 已提交
890
        for(i = 0; i < 2; i++) {
P
pbrook 已提交
891
            isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
B
bellard 已提交
892 893
                         bs_table[2 * i], bs_table[2 * i + 1]);
        }
B
bellard 已提交
894
    }
B
bellard 已提交
895

P
pbrook 已提交
896
    i8042_init(i8259[1], i8259[12], 0x60);
B
bellard 已提交
897
    DMA_init(0);
898
#ifdef HAS_AUDIO
P
pbrook 已提交
899
    audio_init(pci_enabled ? pci_bus : NULL, i8259);
B
bellard 已提交
900
#endif
B
bellard 已提交
901

P
pbrook 已提交
902
    floppy_controller = fdctrl_init(i8259[6], 2, 0, 0x3f0, fd_table);
B
bellard 已提交
903

B
bellard 已提交
904
    cmos_init(ram_size, boot_device, bs_table);
B
bellard 已提交
905

B
bellard 已提交
906
    if (pci_enabled && usb_enabled) {
T
ths 已提交
907
        usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
B
bellard 已提交
908 909
    }

B
bellard 已提交
910
    if (pci_enabled && acpi_enabled) {
911
        uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
P
pbrook 已提交
912 913 914
        i2c_bus *smbus;

        /* TODO: Populate SPD eeprom data.  */
T
ths 已提交
915
        smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100);
916
        for (i = 0; i < 8; i++) {
P
pbrook 已提交
917
            smbus_eeprom_device_init(smbus, 0x50 + i, eeprom_buf + (i * 256));
918
        }
B
bellard 已提交
919
    }
920

B
bellard 已提交
921 922 923
    if (i440fx_state) {
        i440fx_init_memory_mappings(i440fx_state);
    }
924 925 926
#if 0
    /* ??? Need to figure out some way for the user to
       specify SCSI devices.  */
P
pbrook 已提交
927 928
    if (pci_enabled) {
        void *scsi;
929 930 931 932 933 934 935 936 937 938
        BlockDriverState *bdrv;

        scsi = lsi_scsi_init(pci_bus, -1);
        bdrv = bdrv_new("scsidisk");
        bdrv_open(bdrv, "scsi_disk.img", 0);
        lsi_scsi_attach(scsi, bdrv, -1);
        bdrv = bdrv_new("scsicd");
        bdrv_open(bdrv, "scsi_cd.iso", 0);
        bdrv_set_type_hint(bdrv, BDRV_TYPE_CDROM);
        lsi_scsi_attach(scsi, bdrv, -1);
P
pbrook 已提交
939
    }
940
#endif
B
bellard 已提交
941
}
B
bellard 已提交
942

943
static void pc_init_pci(int ram_size, int vga_ram_size, int boot_device,
944 945 946
                        DisplayState *ds, const char **fd_filename,
                        int snapshot,
                        const char *kernel_filename,
947
                        const char *kernel_cmdline,
948 949
                        const char *initrd_filename,
                        const char *cpu_model)
950 951 952 953 954 955 956 957
{
    pc_init1(ram_size, vga_ram_size, boot_device,
             ds, fd_filename, snapshot,
             kernel_filename, kernel_cmdline,
             initrd_filename, 1);
}

static void pc_init_isa(int ram_size, int vga_ram_size, int boot_device,
958 959 960
                        DisplayState *ds, const char **fd_filename,
                        int snapshot,
                        const char *kernel_filename,
961
                        const char *kernel_cmdline,
962 963
                        const char *initrd_filename,
                        const char *cpu_model)
964 965 966 967 968 969 970
{
    pc_init1(ram_size, vga_ram_size, boot_device,
             ds, fd_filename, snapshot,
             kernel_filename, kernel_cmdline,
             initrd_filename, 0);
}

B
bellard 已提交
971 972 973
QEMUMachine pc_machine = {
    "pc",
    "Standard PC",
974 975 976 977 978 979 980
    pc_init_pci,
};

QEMUMachine isapc_machine = {
    "isapc",
    "ISA-only PC",
    pc_init_isa,
B
bellard 已提交
981
};