Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
提交 bb36d470 编写于 作者: B bellard
浏览文件
操作

initial USB support 

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1597 c046a42c-6fe2-441c-8c8c-71466251a162
上级 1aff381f
无相关合并请求
展开全部 隐藏空白更改
内联 并排
Showing with 1847 addition and 1 deletion
Changelog
浏览文件 @ bb36d470
......@@ -6,6 +6,7 @@ version 0.7.3:
- ALSA audio driver (malc)
- new audio options: '-soundhw' and '-audio-help' (malc)
- ES1370 PCI audio device (malc)
- Initial USB support
version 0.7.2:
......
Makefile.target
浏览文件 @ bb36d470
......@@ -294,7 +294,7 @@ ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
VL_OBJS+= ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o
VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o usb.o usb-uhci.o usb-linux.o
DEFINES += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
......
hw/pc.c
浏览文件 @ bb36d470
......@@ -620,6 +620,28 @@ static void pc_init1(int ram_size, int vga_ram_size, int boot_device,
cmos_init(ram_size, boot_device, bs_table);
if (pci_enabled && usb_enabled) {
USBPort *usb_root_ports[2];
USBDevice *usb_hub;
usb_uhci_init(pci_bus, usb_root_ports);
#if 0
{
USBPort *usb_hub1_ports[4];
USBPort *usb_hub2_ports[2];
/* test: we simulate a USB hub */
usb_hub = usb_hub_init(usb_hub1_ports, 4);
usb_attach(usb_root_ports[0], usb_hub);
/* test: we simulate a USB hub */
usb_hub = usb_hub_init(usb_hub2_ports, 2);
usb_attach(usb_hub1_ports[0], usb_hub);
}
#endif
/* simulated hub with the host USB devices connected to it */
usb_hub = usb_host_hub_init();
usb_attach(usb_root_ports[0], usb_hub);
}
/* must be done after all PCI devices are instanciated */
/* XXX: should be done in the Bochs BIOS */
if (pci_enabled) {
......
hw/usb-uhci.c 0 → 100644
浏览文件 @ bb36d470
/*
* USB UHCI controller emulation
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
//#define DEBUG
//#define DEBUG_PACKET
#define UHCI_CMD_GRESET (1 << 2)
#define UHCI_CMD_HCRESET (1 << 1)
#define UHCI_CMD_RS (1 << 0)
#define UHCI_STS_HCHALTED (1 << 5)
#define UHCI_STS_HCPERR (1 << 4)
#define UHCI_STS_HSERR (1 << 3)
#define UHCI_STS_RD (1 << 2)
#define UHCI_STS_USBERR (1 << 1)
#define UHCI_STS_USBINT (1 << 0)
#define TD_CTRL_SPD (1 << 29)
#define TD_CTRL_ERROR_SHIFT 27
#define TD_CTRL_IOS (1 << 25)
#define TD_CTRL_IOC (1 << 24)
#define TD_CTRL_ACTIVE (1 << 23)
#define TD_CTRL_STALL (1 << 22)
#define TD_CTRL_BABBLE (1 << 20)
#define TD_CTRL_NAK (1 << 19)
#define TD_CTRL_TIMEOUT (1 << 18)
#define UHCI_PORT_RESET (1 << 9)
#define UHCI_PORT_LSDA (1 << 8)
#define UHCI_PORT_ENC (1 << 3)
#define UHCI_PORT_EN (1 << 2)
#define UHCI_PORT_CSC (1 << 1)
#define UHCI_PORT_CCS (1 << 0)
#define FRAME_TIMER_FREQ 1000
#define FRAME_MAX_LOOPS 100
#define NB_PORTS 2
typedef struct UHCIPort {
USBPort port;
uint16_t ctrl;
USBDevice *dev; /* connected device */
} UHCIPort;
typedef struct UHCIState {
PCIDevice dev;
uint16_t cmd; /* cmd register */
uint16_t status;
uint16_t intr; /* interrupt enable register */
uint16_t frnum; /* frame number */
uint32_t fl_base_addr; /* frame list base address */
uint8_t sof_timing;
uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */
QEMUTimer *frame_timer;
UHCIPort ports[NB_PORTS];
} UHCIState;
typedef struct UHCI_TD {
uint32_t link;
uint32_t ctrl; /* see TD_CTRL_xxx */
uint32_t token;
uint32_t buffer;
} UHCI_TD;
typedef struct UHCI_QH {
uint32_t link;
uint32_t el_link;
} UHCI_QH;
static void uhci_attach(USBPort *port1, USBDevice *dev);
static void uhci_update_irq(UHCIState *s)
{
int level;
if (((s->status2 & 1) && (s->intr & (1 << 2))) ||
((s->status2 & 2) && (s->intr & (1 << 3))) ||
((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) ||
((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) ||
(s->status & UHCI_STS_HSERR) ||
(s->status & UHCI_STS_HCPERR)) {
level = 1;
} else {
level = 0;
}
pci_set_irq(&s->dev, 0, level);
}
static void uhci_reset(UHCIState *s)
{
uint8_t *pci_conf;
int i;
UHCIPort *port;
pci_conf = s->dev.config;
pci_conf[0x6a] = 0x01; /* usb clock */
pci_conf[0x6b] = 0x00;
s->cmd = 0;
s->status = 0;
s->status2 = 0;
s->intr = 0;
s->fl_base_addr = 0;
s->sof_timing = 64;
for(i = 0; i < NB_PORTS; i++) {
port = &s->ports[i];
port->ctrl = 0x0080;
if (port->dev)
uhci_attach(&port->port, port->dev);
}
}
static void uhci_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
{
UHCIState *s = opaque;
addr &= 0x1f;
switch(addr) {
case 0x0c:
s->sof_timing = val;
break;
}
}
static uint32_t uhci_ioport_readb(void *opaque, uint32_t addr)
{
UHCIState *s = opaque;
uint32_t val;
addr &= 0x1f;
switch(addr) {
case 0x0c:
val = s->sof_timing;
default:
val = 0xff;
break;
}
return val;
}
static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
UHCIState *s = opaque;
addr &= 0x1f;
#ifdef DEBUG
printf("uhci writew port=0x%04x val=0x%04x\n", addr, val);
#endif
switch(addr) {
case 0x00:
if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
/* start frame processing */
qemu_mod_timer(s->frame_timer, qemu_get_clock(vm_clock));
}
if (val & UHCI_CMD_GRESET) {
UHCIPort *port;
USBDevice *dev;
int i;
/* send reset on the USB bus */
for(i = 0; i < NB_PORTS; i++) {
port = &s->ports[i];
dev = port->dev;
if (dev) {
dev->handle_packet(dev,
USB_MSG_RESET, 0, 0, NULL, 0);
}
}
uhci_reset(s);
return;
}
if (val & UHCI_CMD_GRESET) {
uhci_reset(s);
return;
}
s->cmd = val;
break;
case 0x02:
s->status &= ~val;
/* XXX: the chip spec is not coherent, so we add a hidden
register to distinguish between IOC and SPD */
if (val & UHCI_STS_USBINT)
s->status2 = 0;
uhci_update_irq(s);
break;
case 0x04:
s->intr = val;
uhci_update_irq(s);
break;
case 0x06:
if (s->status & UHCI_STS_HCHALTED)
s->frnum = val & 0x7ff;
break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
USBDevice *dev;
int n;
n = (addr >> 1) & 7;
if (n >= NB_PORTS)
return;
port = &s->ports[n];
dev = port->dev;
if (dev) {
/* port reset */
if ( (val & UHCI_PORT_RESET) &&
!(port->ctrl & UHCI_PORT_RESET) ) {
dev->handle_packet(dev,
USB_MSG_RESET, 0, 0, NULL, 0);
}
}
port->ctrl = (port->ctrl & 0x01fb) | (val & ~0x01fb);
/* some bits are reset when a '1' is written to them */
port->ctrl &= ~(val & 0x000a);
}
break;
}
}
static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
{
UHCIState *s = opaque;
uint32_t val;
addr &= 0x1f;
switch(addr) {
case 0x00:
val = s->cmd;
break;
case 0x02:
val = s->status;
break;
case 0x04:
val = s->intr;
break;
case 0x06:
val = s->frnum;
break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
int n;
n = (addr >> 1) & 7;
if (n >= NB_PORTS)
goto read_default;
port = &s->ports[n];
val = port->ctrl;
}
break;
default:
read_default:
val = 0xff7f; /* disabled port */
break;
}
#ifdef DEBUG
printf("uhci readw port=0x%04x val=0x%04x\n", addr, val);
#endif
return val;
}
static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
{
UHCIState *s = opaque;
addr &= 0x1f;
#ifdef DEBUG
printf("uhci writel port=0x%04x val=0x%08x\n", addr, val);
#endif
switch(addr) {
case 0x08:
s->fl_base_addr = val & ~0xfff;
break;
}
}
static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
{
UHCIState *s = opaque;
uint32_t val;
addr &= 0x1f;
switch(addr) {
case 0x08:
val = s->fl_base_addr;
break;
default:
val = 0xffffffff;
break;
}
return val;
}
static void uhci_attach(USBPort *port1, USBDevice *dev)
{
UHCIState *s = port1->opaque;
UHCIPort *port = &s->ports[port1->index];
if (dev) {
if (port->dev) {
usb_attach(port1, NULL);
}
/* set connect status */
if (!(port->ctrl & UHCI_PORT_CCS)) {
port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC;
}
/* update speed */
if (dev->speed == USB_SPEED_LOW)
port->ctrl |= UHCI_PORT_LSDA;
else
port->ctrl &= ~UHCI_PORT_LSDA;
port->dev = dev;
/* send the attach message */
dev->handle_packet(dev,
USB_MSG_ATTACH, 0, 0, NULL, 0);
} else {
/* set connect status */
if (!(port->ctrl & UHCI_PORT_CCS)) {
port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC;
}
/* disable port */
if (port->ctrl & UHCI_PORT_EN) {
port->ctrl &= ~UHCI_PORT_EN;
port->ctrl |= UHCI_PORT_ENC;
}
dev = port->dev;
if (dev) {
/* send the detach message */
dev->handle_packet(dev,
USB_MSG_DETACH, 0, 0, NULL, 0);
}
port->dev = NULL;
}
}
static int uhci_broadcast_packet(UHCIState *s, uint8_t pid,
uint8_t devaddr, uint8_t devep,
uint8_t *data, int len)
{
UHCIPort *port;
USBDevice *dev;
int i, ret;
#ifdef DEBUG_PACKET
{
const char *pidstr;
switch(pid) {
case USB_TOKEN_SETUP: pidstr = "SETUP"; break;
case USB_TOKEN_IN: pidstr = "IN"; break;
case USB_TOKEN_OUT: pidstr = "OUT"; break;
default: pidstr = "?"; break;
}
printf("frame %d: pid=%s addr=0x%02x ep=%d len=%d\n",
s->frnum, pidstr, devaddr, devep, len);
if (pid != USB_TOKEN_IN) {
printf(" data_out=");
for(i = 0; i < len; i++) {
printf(" %02x", data[i]);
}
printf("\n");
}
}
#endif
for(i = 0; i < NB_PORTS; i++) {
port = &s->ports[i];
dev = port->dev;
if (dev && (port->ctrl & UHCI_PORT_EN)) {
ret = dev->handle_packet(dev, pid,
devaddr, devep,
data, len);
if (ret != USB_RET_NODEV) {
#ifdef DEBUG_PACKET
{
printf(" ret=%d ", ret);
if (pid == USB_TOKEN_IN && ret > 0) {
printf("data_in=");
for(i = 0; i < ret; i++) {
printf(" %02x", data[i]);
}
}
printf("\n");
}
#endif
return ret;
}
}
}
return USB_RET_NODEV;
}
/* return -1 if fatal error (frame must be stopped)
0 if TD successful
1 if TD unsuccessful or inactive
*/
static int uhci_handle_td(UHCIState *s, UHCI_TD *td, int *int_mask)
{
uint8_t pid;
uint8_t buf[1280];
int len, max_len, err, ret;
if (td->ctrl & TD_CTRL_IOC) {
*int_mask |= 0x01;
}
if (!(td->ctrl & TD_CTRL_ACTIVE))
return 1;
/* TD is active */
max_len = ((td->token >> 21) + 1) & 0x7ff;
pid = td->token & 0xff;
switch(pid) {
case USB_TOKEN_OUT:
case USB_TOKEN_SETUP:
cpu_physical_memory_read(td->buffer, buf, max_len);
ret = uhci_broadcast_packet(s, pid,
(td->token >> 8) & 0x7f,
(td->token >> 15) & 0xf,
buf, max_len);
len = max_len;
break;
case USB_TOKEN_IN:
ret = uhci_broadcast_packet(s, pid,
(td->token >> 8) & 0x7f,
(td->token >> 15) & 0xf,
buf, max_len);
if (ret >= 0) {
len = ret;
if (len > max_len) {
len = max_len;
ret = USB_RET_BABBLE;
}
if (len > 0) {
/* write the data back */
cpu_physical_memory_write(td->buffer, buf, len);
}
} else {
len = 0;
}
break;
default:
/* invalid pid : frame interrupted */
s->status |= UHCI_STS_HCPERR;
uhci_update_irq(s);
return -1;
}
if (td->ctrl & TD_CTRL_IOS)
td->ctrl &= ~TD_CTRL_ACTIVE;
if (ret >= 0) {
td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff);
td->ctrl &= ~TD_CTRL_ACTIVE;
if (pid == USB_TOKEN_IN &&
(td->ctrl & TD_CTRL_SPD) &&
len < max_len) {
*int_mask |= 0x02;
/* short packet: do not update QH */
return 1;
} else {
/* success */
return 0;
}
} else {
switch(ret) {
default:
case USB_RET_NODEV:
do_timeout:
td->ctrl |= TD_CTRL_TIMEOUT;
err = (td->ctrl >> TD_CTRL_ERROR_SHIFT) & 3;
if (err != 0) {
err--;
if (err == 0) {
td->ctrl &= ~TD_CTRL_ACTIVE;
s->status |= UHCI_STS_USBERR;
uhci_update_irq(s);
}
}
td->ctrl = (td->ctrl & ~(3 << TD_CTRL_ERROR_SHIFT)) |
(err << TD_CTRL_ERROR_SHIFT);
return 1;
case USB_RET_NAK:
td->ctrl |= TD_CTRL_NAK;
if (pid == USB_TOKEN_SETUP)
goto do_timeout;
return 1;
case USB_RET_STALL:
td->ctrl |= TD_CTRL_STALL;
td->ctrl &= ~TD_CTRL_ACTIVE;
return 1;
case USB_RET_BABBLE:
td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
td->ctrl &= ~TD_CTRL_ACTIVE;
/* frame interrupted */
return -1;
}
}
}
static void uhci_frame_timer(void *opaque)
{
UHCIState *s = opaque;
int64_t expire_time;
uint32_t frame_addr, link, old_td_ctrl, val;
int int_mask, cnt, ret;
UHCI_TD td;
UHCI_QH qh;
if (!(s->cmd & UHCI_CMD_RS)) {
qemu_del_timer(s->frame_timer);
return;
}
frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
cpu_physical_memory_read(frame_addr, (uint8_t *)&link, 4);
le32_to_cpus(&link);
int_mask = 0;
cnt = FRAME_MAX_LOOPS;
while ((link & 1) == 0) {
if (--cnt == 0)
break;
/* valid frame */
if (link & 2) {
/* QH */
cpu_physical_memory_read(link & ~0xf, (uint8_t *)&qh, sizeof(qh));
le32_to_cpus(&qh.link);
le32_to_cpus(&qh.el_link);
depth_first:
if (qh.el_link & 1) {
/* no element : go to next entry */
link = qh.link;
} else if (qh.el_link & 2) {
/* QH */
link = qh.el_link;
} else {
/* TD */
if (--cnt == 0)
break;
cpu_physical_memory_read(qh.el_link & ~0xf,
(uint8_t *)&td, sizeof(td));
le32_to_cpus(&td.link);
le32_to_cpus(&td.ctrl);
le32_to_cpus(&td.token);
le32_to_cpus(&td.buffer);
old_td_ctrl = td.ctrl;
ret = uhci_handle_td(s, &td, &int_mask);
/* update the status bits of the TD */
if (old_td_ctrl != td.ctrl) {
val = cpu_to_le32(td.ctrl);
cpu_physical_memory_write((qh.el_link & ~0xf) + 4,
(const uint8_t *)&val,
sizeof(val));
}
if (ret < 0)
break; /* interrupted frame */
if (ret == 0) {
/* update qh element link */
qh.el_link = td.link;
val = cpu_to_le32(qh.el_link);
cpu_physical_memory_write((link & ~0xf) + 4,
(const uint8_t *)&val,
sizeof(val));
if (qh.el_link & 4) {
/* depth first */
goto depth_first;
}
}
/* go to next entry */
link = qh.link;
}
} else {
/* TD */
cpu_physical_memory_read(link & ~0xf, (uint8_t *)&td, sizeof(td));
le32_to_cpus(&td.link);
le32_to_cpus(&td.ctrl);
le32_to_cpus(&td.token);
le32_to_cpus(&td.buffer);
old_td_ctrl = td.ctrl;
ret = uhci_handle_td(s, &td, &int_mask);
/* update the status bits of the TD */
if (old_td_ctrl != td.ctrl) {
val = cpu_to_le32(td.ctrl);
cpu_physical_memory_write((link & ~0xf) + 4,
(const uint8_t *)&val,
sizeof(val));
}
if (ret < 0)
break; /* interrupted frame */
link = td.link;
}
}
s->frnum = (s->frnum + 1) & 0x7ff;
if (int_mask) {
s->status2 |= int_mask;
s->status |= UHCI_STS_USBINT;
uhci_update_irq(s);
}
/* prepare the timer for the next frame */
expire_time = qemu_get_clock(vm_clock) +
(ticks_per_sec / FRAME_TIMER_FREQ);
qemu_mod_timer(s->frame_timer, expire_time);
}
static void uhci_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
UHCIState *s = (UHCIState *)pci_dev;
register_ioport_write(addr, 32, 2, uhci_ioport_writew, s);
register_ioport_read(addr, 32, 2, uhci_ioport_readw, s);
register_ioport_write(addr, 32, 4, uhci_ioport_writel, s);
register_ioport_read(addr, 32, 4, uhci_ioport_readl, s);
register_ioport_write(addr, 32, 1, uhci_ioport_writeb, s);
register_ioport_read(addr, 32, 1, uhci_ioport_readb, s);
}
void usb_uhci_init(PCIBus *bus, USBPort **usb_ports)
{
UHCIState *s;
uint8_t *pci_conf;
UHCIPort *port;
int i;
s = (UHCIState *)pci_register_device(bus,
"USB-UHCI", sizeof(UHCIState),
-1,
NULL, NULL);
pci_conf = s->dev.config;
pci_conf[0x00] = 0x86;
pci_conf[0x01] = 0x80;
pci_conf[0x02] = 0x20;
pci_conf[0x03] = 0x70;
pci_conf[0x08] = 0x01; // revision number
pci_conf[0x09] = 0x00;
pci_conf[0x0a] = 0x03;
pci_conf[0x0b] = 0x0c;
pci_conf[0x0e] = 0x00; // header_type
pci_conf[0x3d] = 1; // interrupt pin 0
for(i = 0; i < NB_PORTS; i++) {
port = &s->ports[i];
port->port.opaque = s;
port->port.index = i;
port->port.attach = uhci_attach;
usb_ports[i] = &port->port;
}
s->frame_timer = qemu_new_timer(vm_clock, uhci_frame_timer, s);
uhci_reset(s);
pci_register_io_region(&s->dev, 0, 0x20,
PCI_ADDRESS_SPACE_IO, uhci_map);
}
hw/usb.c 0 → 100644
浏览文件 @ bb36d470
此差异已折叠。
hw/usb.h 0 → 100644
浏览文件 @ bb36d470
/*
* QEMU USB API
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#define USB_TOKEN_SETUP 0x2d
#define USB_TOKEN_IN 0x69 /* device -> host */
#define USB_TOKEN_OUT 0xe1 /* host -> device */
/* specific usb messages, also sent in the 'pid' parameter */
#define USB_MSG_ATTACH 0x100
#define USB_MSG_DETACH 0x101
#define USB_MSG_RESET 0x102
#define USB_RET_NODEV (-1)
#define USB_RET_NAK (-2)
#define USB_RET_STALL (-3)
#define USB_RET_BABBLE (-4)
#define USB_SPEED_LOW 0
#define USB_SPEED_FULL 1
#define USB_SPEED_HIGH 2
#define USB_STATE_NOTATTACHED 0
#define USB_STATE_ATTACHED 1
//#define USB_STATE_POWERED 2
#define USB_STATE_DEFAULT 3
//#define USB_STATE_ADDRESS 4
//#define USB_STATE_CONFIGURED 5
#define USB_STATE_SUSPENDED 6
#define USB_DIR_OUT 0
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_CLASS (0x01 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_TYPE_RESERVED (0x03 << 5)
#define USB_RECIP_MASK 0x1f
#define USB_RECIP_DEVICE 0x00
#define USB_RECIP_INTERFACE 0x01
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DEVICE_SELF_POWERED 0
#define USB_DEVICE_REMOTE_WAKEUP 1
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
#define USB_DT_STRING 0x03
#define USB_DT_INTERFACE 0x04
#define USB_DT_ENDPOINT 0x05
typedef struct USBPort USBPort;
typedef struct USBDevice USBDevice;
/* definition of a USB device */
struct USBDevice {
void *opaque;
int (*handle_packet)(USBDevice *dev, int pid,
uint8_t devaddr, uint8_t devep,
uint8_t *data, int len);
int speed;
/* The following fields are used by the generic USB device
layer. They are here just to avoid creating a new structure for
them. */
void (*handle_reset)(USBDevice *dev);
int (*handle_control)(USBDevice *dev, int request, int value,
int index, int length, uint8_t *data);
int (*handle_data)(USBDevice *dev, int pid, uint8_t devep,
uint8_t *data, int len);
uint8_t addr;
int state;
uint8_t setup_buf[8];
uint8_t data_buf[1024];
int remote_wakeup;
int setup_state;
int setup_len;
int setup_index;
};
/* USB port on which a device can be connected */
struct USBPort {
void (*attach)(USBPort *port, USBDevice *dev);
void *opaque;
int index; /* internal port index, may be used with the opaque */
};
void usb_attach(USBPort *port, USBDevice *dev);
int usb_generic_handle_packet(USBDevice *s, int pid,
uint8_t devaddr, uint8_t devep,
uint8_t *data, int len);
int set_usb_string(uint8_t *buf, const char *str);
/* usb hub */
USBDevice *usb_hub_init(USBPort **usb_ports, int nb_ports);
/* usb-uhci.c */
void usb_uhci_init(PCIBus *bus, USBPort **usb_ports);
/* usb-linux.c */
USBDevice *usb_host_hub_init(void);
usb-linux.c 0 → 100644
浏览文件 @ bb36d470
/*
* Linux host USB redirector
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
#if defined(__linux__)
#include <dirent.h>
#include <sys/ioctl.h>
#include <linux/usbdevice_fs.h>
#include <linux/version.h>
/* We redefine it to avoid version problems */
struct usb_ctrltransfer {
uint8_t bRequestType;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
uint32_t timeout;
void *data;
};
//#define DEBUG
#define MAX_DEVICES 8
#define USBDEVFS_PATH "/proc/bus/usb"
typedef struct USBHostDevice {
USBDevice dev;
int fd;
} USBHostDevice;
typedef struct USBHostHubState {
USBDevice *hub_dev;
USBPort *hub_ports[MAX_DEVICES];
USBDevice *hub_devices[MAX_DEVICES];
} USBHostHubState;
static void usb_host_handle_reset(USBDevice *dev)
{
#if 0
USBHostDevice *s = (USBHostDevice *)dev;
/* USBDEVFS_RESET, but not the first time as it has already be
done by the host OS */
ioctl(s->fd, USBDEVFS_RESET);
#endif
}
static int usb_host_handle_control(USBDevice *dev,
int request,
int value,
int index,
int length,
uint8_t *data)
{
USBHostDevice *s = (USBHostDevice *)dev;
struct usb_ctrltransfer ct;
int ret;
if (request == (DeviceOutRequest | USB_REQ_SET_ADDRESS)) {
/* specific SET_ADDRESS support */
dev->addr = value;
return 0;
} else {
ct.bRequestType = request >> 8;
ct.bRequest = request;
ct.wValue = value;
ct.wIndex = index;
ct.wLength = length;
ct.timeout = 50;
ct.data = data;
ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct);
if (ret < 0) {
switch(errno) {
case ETIMEDOUT:
return USB_RET_NAK;
default:
return USB_RET_STALL;
}
} else {
return ret;
}
}
}
static int usb_host_handle_data(USBDevice *dev, int pid,
uint8_t devep,
uint8_t *data, int len)
{
USBHostDevice *s = (USBHostDevice *)dev;
struct usbdevfs_bulktransfer bt;
int ret;
/* XXX: optimize and handle all data types by looking at the
config descriptor */
if (pid == USB_TOKEN_IN)
devep |= 0x80;
bt.ep = devep;
bt.len = len;
bt.timeout = 50;
bt.data = data;
ret = ioctl(s->fd, USBDEVFS_BULK, &bt);
if (ret < 0) {
switch(errno) {
case ETIMEDOUT:
return USB_RET_NAK;
case EPIPE:
default:
#ifdef DEBUG
printf("handle_data: errno=%d\n", errno);
#endif
return USB_RET_STALL;
}
} else {
return ret;
}
}
static int usb_host_handle_packet(USBDevice *dev, int pid,
uint8_t devaddr, uint8_t devep,
uint8_t *data, int len)
{
return usb_generic_handle_packet(dev, pid, devaddr, devep, data, len);
}
/* XXX: exclude high speed devices or implement EHCI */
static void scan_host_device(USBHostHubState *s, const char *filename)
{
int fd, interface, ret, i;
USBHostDevice *dev;
struct usbdevfs_connectinfo ci;
uint8_t descr[1024];
int descr_len, dev_descr_len, config_descr_len, nb_interfaces;
#ifdef DEBUG
printf("scanning %s\n", filename);
#endif
fd = open(filename, O_RDWR);
if (fd < 0) {
perror(filename);
return;
}
/* read the config description */
descr_len = read(fd, descr, sizeof(descr));
if (descr_len <= 0) {
perror("read descr");
goto fail;
}
i = 0;
dev_descr_len = descr[0];
if (dev_descr_len > descr_len)
goto fail;
i += dev_descr_len;
config_descr_len = descr[i];
if (i + config_descr_len > descr_len)
goto fail;
nb_interfaces = descr[i + 4];
if (nb_interfaces != 1) {
/* NOTE: currently we grab only one interface */
goto fail;
}
/* XXX: only grab if all interfaces are free */
interface = 0;
ret = ioctl(fd, USBDEVFS_CLAIMINTERFACE, &interface);
if (ret < 0) {
if (errno == EBUSY) {
#ifdef DEBUG
printf("%s already grabbed\n", filename);
#endif
} else {
perror("USBDEVFS_CLAIMINTERFACE");
}
fail:
close(fd);
return;
}
ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
if (ret < 0) {
perror("USBDEVFS_CONNECTINFO");
goto fail;
}
#ifdef DEBUG
printf("%s grabbed\n", filename);
#endif
/* find a free slot */
for(i = 0; i < MAX_DEVICES; i++) {
if (!s->hub_devices[i])
break;
}
if (i == MAX_DEVICES) {
#ifdef DEBUG
printf("too many host devices\n");
goto fail;
#endif
}
dev = qemu_mallocz(sizeof(USBHostDevice));
if (!dev)
goto fail;
dev->fd = fd;
if (ci.slow)
dev->dev.speed = USB_SPEED_LOW;
else
dev->dev.speed = USB_SPEED_HIGH;
dev->dev.handle_packet = usb_host_handle_packet;
dev->dev.handle_reset = usb_host_handle_reset;
dev->dev.handle_control = usb_host_handle_control;
dev->dev.handle_data = usb_host_handle_data;
s->hub_devices[i] = (USBDevice *)dev;
/* activate device on hub */
usb_attach(s->hub_ports[i], s->hub_devices[i]);
}
static void scan_host_devices(USBHostHubState *s, const char *bus_path)
{
DIR *d;
struct dirent *de;
char buf[1024];
d = opendir(bus_path);
if (!d)
return;
for(;;) {
de = readdir(d);
if (!de)
break;
if (de->d_name[0] != '.') {
snprintf(buf, sizeof(buf), "%s/%s", bus_path, de->d_name);
scan_host_device(s, buf);
}
}
closedir(d);
}
static void scan_host_buses(USBHostHubState *s)
{
DIR *d;
struct dirent *de;
char buf[1024];
d = opendir(USBDEVFS_PATH);
if (!d)
return;
for(;;) {
de = readdir(d);
if (!de)
break;
if (isdigit(de->d_name[0])) {
snprintf(buf, sizeof(buf), "%s/%s", USBDEVFS_PATH, de->d_name);
scan_host_devices(s, buf);
}
}
closedir(d);
}
/* virtual hub containing the USB devices of the host */
USBDevice *usb_host_hub_init(void)
{
USBHostHubState *s;
s = qemu_mallocz(sizeof(USBHostHubState));
if (!s)
return NULL;
s->hub_dev = usb_hub_init(s->hub_ports, MAX_DEVICES);
if (!s->hub_dev) {
free(s);
return NULL;
}
scan_host_buses(s);
return s->hub_dev;
}
#else
/* XXX: modify configure to compile the right host driver */
USBDevice *usb_host_hub_init(void)
{
return NULL;
}
#endif
vl.c
浏览文件 @ bb36d470
......@@ -153,6 +153,7 @@ CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
#ifdef TARGET_I386
int win2k_install_hack = 0;
#endif
int usb_enabled = 0;
/***********************************************************/
/* x86 ISA bus support */
......@@ -2986,6 +2987,7 @@ enum {
QEMU_OPTION_pidfile,
QEMU_OPTION_no_kqemu,
QEMU_OPTION_win2k_hack,
QEMU_OPTION_usb,
};
typedef struct QEMUOption {
......@@ -3060,6 +3062,7 @@ const QEMUOption qemu_options[] = {
{ "full-screen", 0, QEMU_OPTION_full_screen },
{ "pidfile", HAS_ARG, QEMU_OPTION_pidfile },
{ "win2k-hack", 0, QEMU_OPTION_win2k_hack },
{ "usb", 0, QEMU_OPTION_usb },
/* temporary options */
{ "pci", 0, QEMU_OPTION_pci },
......@@ -3646,6 +3649,9 @@ int main(int argc, char **argv)
kqemu_allowed = 0;
break;
#endif
case QEMU_OPTION_usb:
usb_enabled = 1;
break;
}
}
}
......
vl.h
浏览文件 @ bb36d470
......@@ -135,6 +135,7 @@ extern int graphic_depth;
extern const char *keyboard_layout;
extern int kqemu_allowed;
extern int win2k_install_hack;
extern int usb_enabled;
/* XXX: make it dynamic */
#if defined (TARGET_PPC)
......@@ -859,6 +860,8 @@ void adb_mouse_init(ADBBusState *bus);
extern ADBBusState adb_bus;
int cuda_init(SetIRQFunc *set_irq, void *irq_opaque, int irq);
#include "hw/usb.h"
#endif /* defined(QEMU_TOOL) */
/* monitor.c */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或
反馈
建议 客服 返回
顶部