Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This basically reverts commit ba64b971
"libxl: Allow libxl to set NIC devid". However assigning devid's
before calling libxlMakeNic does not work as that is calling
libxl_device_nic_init which sets it back to -1.
Right now auto-assignment only works in the hotplug case. But even if
that would be fixed at some point (if that is possible at all), this
would add a weird dependency between Xen and libvirt versions.
The change here should accept any auto-assignment that makes it into
libxl_device_nic_init. My understanding is that a caller always is
allowed to make the devid choice itself. And assuming libxlMakeNicList
is only used on domain creation, a sequential numbering should be ok.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

As pointed out by the Xen folks [1], HVM nics should always be set
to type LIBXL_NIC_TYPE_VIF_IOEMU unless the user explicity requests
LIBXL_NIC_TYPE_VIF via model='netfront'.  The current logic in
libxlMakeNic() only sets the nictype to LIBXL_NIC_TYPE_VIF_IOEMU if
a model is specified that is not 'netfront', which breaks PXE booting
configurations where no model is specified (i.e. use the hypervisor
default).
Reported-by: NStefan Bader <stefan.bader@canonical.com>

[1] https://www.redhat.com/archives/libvir-list/2013-December/msg01156.html

Report the error in virPortAllocatorAcquire instead
of doing it in every caller.

The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE

This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.

Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.

To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.

The regular expression used to determine guest capabilities
was compiled in libxlCapsInitHost() but used in libxlCapsInitGuests().
Move compilation to libxlCapsInitGuests() where it is used, and free
the compiled regex after use.  Ensure not to free the regex if
compilation fails.

Change libxlGetAutoballoonConf() function to return an int
for success/failure, and fail if regcomp fails.

Change source file copyright notice to prevailing libvirt style.

Now that most fields of libxlDriverPrivate struct are immutable
or self-locking, there is no need to acquire the driver lock in
much of the libxl driver.

The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.

libxlMakeDomCreateInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain.  Switch to using the per-domain
libxl ctx.

libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object.  Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().

Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files.  This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.

Detecting whether or not to autoballoon is configuration related,
so move the code to libxl_conf.

If we reached cleanup: prior to allocating cpus, it was possible that
'nr_nodes' had a value, but cpus was NULL leading to a possible NULL
deref. Add a 'cpus' as an end condition to for loop

From: Dario Faggioli <dario.faggioli@citrix.com>

Starting from Xen 4.2, libxl has all the bits and pieces in place
for retrieving an adequate amount of information about the host
NUMA topology. It is therefore possible, after a bit of shuffling,
to arrange those information in the way libvirt wants to present
them to the outside world.

Therefore, with this patch, the <topology> section of the host
capabilities is properly populated, when running on Xen, so that
we can figure out whether or not we're running on a NUMA host,
and what its characteristics are.

[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// capabilities
<capabilities>
  <host>
    <cpu>
    ....
    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>6291456</memory>
          <cpus num='8'>
            <cpu id='0' socket_id='1' core_id='0' siblings='0-1'/>
            <cpu id='1' socket_id='1' core_id='0' siblings='0-1'/>
            <cpu id='2' socket_id='1' core_id='1' siblings='2-3'/>
            <cpu id='3' socket_id='1' core_id='1' siblings='2-3'/>
            <cpu id='4' socket_id='1' core_id='9' siblings='4-5'/>
            <cpu id='5' socket_id='1' core_id='9' siblings='4-5'/>
            <cpu id='6' socket_id='1' core_id='10' siblings='6-7'/>
            <cpu id='7' socket_id='1' core_id='10' siblings='6-7'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>6881280</memory>
          <cpus num='8'>
            <cpu id='8' socket_id='0' core_id='0' siblings='8-9'/>
            <cpu id='9' socket_id='0' core_id='0' siblings='8-9'/>
            <cpu id='10' socket_id='0' core_id='1' siblings='10-11'/>
            <cpu id='11' socket_id='0' core_id='1' siblings='10-11'/>
            <cpu id='12' socket_id='0' core_id='9' siblings='12-13'/>
            <cpu id='13' socket_id='0' core_id='9' siblings='12-13'/>
            <cpu id='14' socket_id='0' core_id='10' siblings='14-15'/>
            <cpu id='15' socket_id='0' core_id='10' siblings='14-15'/>
          </cpus>
        </cell>
      </cells>
    </topology>
  </host>
  ....

Cleanup the libxl capabilities code to be a bit more extensible,
splitting out the creation of host and guest capabilities.  This
should make it easier to implement additional capabilities in the
future, such as NUMA topology reporting.

As per HACKING, remove some unneeded curly braces in the
libxl driver.

this patch introduce the console api in libxl driver for both pv and
hvm guest.  and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).

Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

libxl supports the LIBXL_DISK_BACKEND_QDISK disk backend, where qemu
is used to provide the disk backend.  This patch simply maps the
existing <driver name='qemu'/> to LIBXL_DISK_BACKEND_QDISK.

Specifying an unsupported disk format with the tap driver resulted in
a less than helpful error message

error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk driver qed

Change the message to state that the qed format is not supported by
the tap driver, e.g.

error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk format qed
with disk driver tap

While at it, check for unsupported formats in the other driver
backends.

libxl contains logic to determine an appropriate devid for new devices
that do not specify one in their configuration.  For all device types
except NICs, the libxl driver allows libxl to determine devid.  Do the
same for NICs.

Do not leave uninitialized variables, not all parameters are set in
libxlMake*.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Actually only those interface types are handled correctly so reject
others instead of ignoring settings (i.e. treating as bridge/ethernet
anyway).
Also allow <script/> in 'ethernet' (which should be the only
script-allowing type). Keep <script/> allowed in bridge to be compatible
with legacy 'xen' driver.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

The legacy xen toolstack will set pygrub as the bootloader if not
specified.  For compatibility, do the same in the libxl driver
iff not using direct kernel boot.

libxlBuildDomainConfig() was disposing the libxl_domain_config object
on error, only to have it disposed again by libxlBuildDomainConfig()'s
caller, which resulted in a segfault.  Leave disposing of the config
object to it's owner.

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.

The libxl driver was setting the backend field of libxl_device_disk
structure to LIBXL_DISK_BACKEND_TAP when the driver element of disk
configuration was not specified.  This needlessly forces the use of
blktap driver, which may not be loaded in dom0

https://bugzilla.redhat.com/show_bug.cgi?id=912488

Ian Campbell suggested that LIBXL_DISK_BACKEND_UNKNOWN is a better
default in this case

https://www.redhat.com/archives/libvir-list/2013-February/msg01126.html

To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the current libxl driver code for managing port
reservations with the new virPortAllocator APIs.