Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The libxl driver was ignoring the <on_*> domain event configuration,
causing e.g. a domain to be rebooted even when on_reboot is set to
destroy.

This patch honors the <on_*> configuration in the shutdown event
handler.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

- Implement nodeGetCPUStats using nodeGetCPUStats()
- Implement nodeGetMemoryStats using nodeGetMemoryStats()

Add a virStringReplace method to virstring.{h,c} to perform
substring matching and replacement
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a virStringSearch method to virstring.{c,h} which performs
a regex match against a string and returns the matching substrings.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I've noticed that in some cases systemd was quick enough and even
if libvirt-guests.service is marked to be started after the
libvirtd.service my guests were not resumed as
libvirt-guests.sh failed to connect. This is because of a
simple fact: systemd correctly starts libvirt-guests after it
execs libvirtd. However, the daemon is not able to accept
connections right from the start. It's doing some
initialization which may take ages. This problem is not limited
to systemd only, indeed. Any init system that is able to startup
services in parallel (e.g. OpenRC) may run into this situation.
The fix is to try connecting not only once, but continuously a few
times with a small sleep in between tries.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1031696

When creating a new domain, we let systemd know about it by calling
CreateMachine() function via dbus. Systemd then creates a scope and
places domain into it. However, later when the host is shutting
down, systemd computes the shutdown order to see what processes can
be shut down in parallel. And since we were not setting
dependencies at all, the slices (and thus domains) were most likely
killed before libvirt-guests.service. So user domains that had to
be saved, shut off, whatever were in fact killed.  This problem can
be solved by letting systemd know that scopes we're creating must
not be killed before libvirt-guests.service.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:543: warning: integer constatnt is too large for 'long' type
Signed-off-by: NEric Blake <eblake@redhat.com>

Based on a report from Pavel Hrdina, gnulib was fixed to support
AC_PROG_SED even when using ancient autoconf 2.59 of RHEL 5.

* .gnulib: Update to latest, to fix build on RHEL 5.
Signed-off-by: NEric Blake <eblake@redhat.com>

There has been a new field introduced in iscsiadm --mode session
output [1], but our regex only expects four fields. This breaks
startup of iscsi pools:
error: Failed to start pool iscsi
error: internal error: cannot find session

Fix this by ignoring anything after the fourth field.

https://bugzilla.redhat.com/show_bug.cgi?id=1067173

[1] https://github.com/mikechristie/open-iscsi/commit/181af9a

Commit 65158899 broke the build on FreeBSD:
In function `qemuDomainGetCPUStats':
/../../src/qemu/qemu_driver.c:16102:
undefined reference to `virCgroupGetDomainTotalCpuStats'

Among other things, gnulib now allows overriding of sed during
'make syntax-check'.

* .gnulib: Update to latest, for maint.mk improvements.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add 'virsh net-event --list' and 'virsh net-event [net] --event=name
[--loop] [--timeout]'.  Very similar to 'virsh event'.

* tools/virsh.pod (net-event): Document new command.
* tools/virsh-network.c (vshNetworkEventToString, vshNetEventData)
(vshEventLifecyclePrint, cmdNetworkEvent): New struct and
functions.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add 'virsh event --list' and 'virsh event [dom] --event=name
[--loop] [--timeout]'.  Borrows somewhat from event-test.c,
but defaults to a one-shot notification, and takes advantage
of the event loop integration to allow Ctrl-C to interrupt the
wait for an event.  For now, this just does lifecycle events.

* tools/virsh.pod (event): Document new command.
* tools/virsh-domain.c (vshDomainEventToString)
(vshDomainEventDetailToString, vshDomEventData)
(vshEventLifecyclePrint, cmdEvent): New struct and functions.
Signed-off-by: NEric Blake <eblake@redhat.com>

I plan to add 'virsh event' to virsh-domain.c and 'virsh
net-event' to virsh-network.c; but as they will share quite
a bit of common boilerplate, it's better to set that up now
in virsh.c.

* tools/virsh.h (_vshControl): Add fields.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup): New
prototypes.
* tools/virsh.c (vshEventFd, vshEventOldAction, vshEventInt)
(vshEventTimeout): New helper variables and functions.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup):
Implement new functions.
(vshInit, vshDeinit, main): Manage event timeout.
Signed-off-by: NEric Blake <eblake@redhat.com>

Several virsh commands ask for a --timeout parameter in
seconds, then use it to control interfaces that operate on
millisecond limits; I also plan on adding a 'virsh event'
command that also does this.  Factor this into a common
function.

* tools/virsh.h (vshCommandOptTimeoutToMs): New prototype.
* tools/virsh.c (vshCommandOptTimeoutToMs): New function.
* tools/virsh-domain.c (cmdBlockCommit, cmdBlockCopy)
(cmdBlockPull, cmdMigrate): Use it.
(vshWatchJob): Adjust timeout scale.
Signed-off-by: NEric Blake <eblake@redhat.com>

Emit libvirt shutdown event when receiving LIBXL_SHUTDOWN_REASON_POWEROFF
event from libxl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Recent autotest/virt-test testing on f20 discovered an anomaly in how
the bandwidth options are documented and used. This was discovered due
to a bug fix in the /sbin/tc utility found in iproute-3.11.0.1 (on f20)
in which overflow was actually caught and returned as an error. The fix
was first introduced in iproute-3.10 (search on iproute2 commit 'a303853e').

The autotest/virt-test test for virsh domiftune was attempting to send
the largest unsigned integer value (4294967295) for maximum value
testing. The libvirt xml implementation was designed to manage values
in kilobytes thus when this value was passed to /sbin/tc, it (now)
properly rejected the 4294967295kbps value.

Investigation of the problem discovered that formatdomain.html.in and
formatnetwork.html.in described the elements and property types slightly
differently, although they use the same code - virNetDevBandwidthParseRate()
(shared by portgroups, domains, and networks xml parsers). Rather than
have the descriptions in two places, this patch will combine and reword
the description under formatnetwork.html.in and have formatdomain.html.in
link to that description.

This documentation faux pas was continued into the virsh man page where
the bandwidth description for both 'attach-interface' and 'domiftune'
did not indicate the format of each value, thus leading to the test using
largest unsigned integer value assuming "bps" rather than "kbps", which
ultimately was wrong.

Commit e4a0e900 missed calling libxlVmCleanupJob in the shutdown
handler when processing a reboot event.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1038363

If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing.  Better is to determine up front
if the change is possible for all requested flags.

Based on an idea by Geoff Franks.

* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.

While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is  (n * (n + 1) ) / 2.  This gets very large, very
quickly.

This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.

The simple usage is

   $ VIR_TEST_OOM=1 ./qemuxml2argvtest
   ...
   29) QEMU XML-2-ARGV clock-utc                                         ... OK
       Test OOM for nalloc=36 .................................... OK
   30) QEMU XML-2-ARGV clock-localtime                                   ... OK
       Test OOM for nalloc=36 .................................... OK
   31) QEMU XML-2-ARGV clock-france                                      ... OK
       Test OOM for nalloc=38 ...................................... OK
   ...

the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.

If it crashes, then running under valgrind will often show the problem

  $ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When debugging problems it is also helpful to select an individual
test case

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest

In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.

  $ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
  30) QEMU XML-2-ARGV clock-localtime                                   ... OK
      Test OOM for nalloc=36 !virAllocN
  /home/berrange/src/virt/libvirt/src/util/viralloc.c:180
  virHashCreateFull
  /home/berrange/src/virt/libvirt/src/util/virhash.c:144
  virDomainDefParseXML
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
  virDomainDefParseNode
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
  virDomainDefParse
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
  testCompareXMLToArgvFiles
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
  virtTestRun
  /home/berrange/src/virt/libvirt/tests/testutils.c:250
  mymain
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
  virtTestMain
  /home/berrange/src/virt/libvirt/tests/testutils.c:750
  ??
  ??:0
  _start
  ??:?
   FAILED
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCgroupXXX APIs' return value must be checked for
being less than 0, not equal to 0.

An VIR_ERR_OPERATION_INVALID error must also be raised
when the VM is not running to prevent a crash on NULL
priv->cgroup field.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.

Adds lxcDomainBlockStatsFlags and lxcDomainBlockStats functions.

To reuse this from other drivers, like lxc.

This reads blkio stats from blkio.throttle.io_service_bytes and
blkio.throttle.io_serviced.

When start a guest with --pass-fd, if the argument of --pass-fd is invalid,
virsh will exit, but doesn't free the variable 'dom'.

The valgrind said:
...
==24569== 63 (56 direct, 7 indirect) bytes in 1 blocks are definitely lost in loss record 130 of 234
==24569==    at 0x4C2A1D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24569==    by 0x4E879A4: virAllocVar (viralloc.c:544)
==24569==    by 0x4EBD625: virObjectNew (virobject.c:190)
==24569==    by 0x4F3A18A: virGetDomain (datatypes.c:226)
==24569==    by 0x4F9311F: remoteDomainLookupByName (remote_driver.c:6636)
==24569==    by 0x4F44F20: virDomainLookupByName (libvirt.c:2277)
==24569==    by 0x12F616: vshCommandOptDomainBy (virsh-domain.c:105)
==24569==    by 0x131C79: cmdStart (virsh-domain.c:3330)
==24569==    by 0x12C4AB: vshCommandRun (virsh.c:1752)
==24569==    by 0x127001: main (virsh.c:3218)

https://bugzilla.redhat.com/show_bug.cgi?id=1067338Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Destroying a suspended domain needs special action.
We cannot simply terminate all process because they are frozen.
Do deal with that we send them SIGKILL and thaw them.
Upon wakeup the process sees the pending signal and dies immediately.
Signed-off-by: NRichard Weinberger <richard@nod.at>

IN6ADDR_ANY_INIT does not seem to be working as expected on MinGW:
error: missing braces around initializer [-Werror=missing-braces]
         .sin6_addr = IN6ADDR_ANY_INIT,

Use the in6addr_any variable instead.

Reported by Daniel P. Berrange.

Currently, networkRunHook() is called in networkAllocateActualDevice and
friends. These functions, however, doesn't necessarily work on networks,
For example, if domain's interface is defined in this fashion:

    <interface type='bridge'>
      <mac address='52:54:00:0b:3b:16'/>
      <source bridge='virbr1'/>
      <model type='rtl8139'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
    </interface>

The networkAllocateActualDevice jumps directly onto 'validate' label as
the interface is not type of 'network'. Hence, @network is left
initialized to NULL and networkRunHook(network, ...) is called. One of
the things that the hook function does is dereference @network. Soupir.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>