ChangeLog

Tue Mar 06 16:52:12 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* include/libvirt/libvirt.h.in, python/libvir.c, src/driver.h
	src/libvirt.c, src/qemu_internal.c, src/test.c, src/virsh.c,
	src/xend_internal.c, src/xm_intenral.c: Change const char **
	to char **const to fix compiler warnings
	* python/Makefile.am: Don't warn about redundant decls
	* python/libvirt_wrap.h: Ensure PyGILState is always initialized
	* tests/reconnect.c: Added ATTRIBUTE_UNUSED annotation
	  All patches from Richard Jones

Tue Mar 06 14:21:12 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c, src/xml.c, src/xm_internal.c: Support
	the 'keymap' attribute for VNC configuration. Based on patch
	signed off by: Takahashi Tomohiro
	* tests/sexpr2xmldata/, tests/xml2sexprdata/: Update to test
	handling of keymap attribute

Tue Mar 06 11:47:12 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/qemud.c: Unlink read-only socket upon startup (patch
	from Rich Jones)

Mon Mar 05 12:19:42 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/qemu_internal.c: Remove bogus ATTRIBUTE_UNUSED annotation
	from qemuOpenConnection (from Rich Jones)

Mon Mar 05 12:07:42 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/qemud.c: Parse QEMU stderr immediately at startup to
	identify monitor, and then wait for monitor prompt. Re-arrange
	order of file descriptor watches/processing to avoid re-entrancy
	problems.
	* qemud/driver.c: Make handling of monitor commands slightly
	more robust. Added support for 'paused' CPU state in status
	* qemud/internal.h, qemud/conf.c: Added support for 'paused'
	CPU state

Mon Mar 05 16:39:54 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: don't try and listen to a null socket
	path when run as a session daemon. Noticed by Rich Jones
	
Mon Mar 05 11:33:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/driver.c: fix a couple of invalid free() calls
	
Mon Mar 05 11:07:38 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* libvirt.spec.in: BuildRequires: /sbin/iptables and
	run configure with the --with-init-script and
	--with-qemud-pid-file parameters.

	* configure.in: it's --with-qemud-pid-file, not
	--with-pid-file
	
Mon Mar 05 10:52:02 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* libvirt.spec.in: sync some of the chanes from dist-cvs
	so that this looks pretty much as it should do for the
	next release.
	
Fri Mar 02 15:16:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Change lookup by UUID to request a path
	of /xen/domain/[uuid] directly for new XenD, rather than iterating
	over domains sequentially. Derived from patch by
	Tatsuro Enokura <fj7716hz@aa.jp.fujitsu.com>

Fri Mar 02 09:21:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/virsh.c: Fix output of VNC display in the case where
	there is no explicit listen attribute in the XML

Thu Mar 01 18:22:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Instead of looking for string 'Cannot'
	in POST response, look for 'xend.err' which is likely to catch
	many more error replies from XenD. Signed-off-by: Kazuki Mizushima

Thu Mar 01 16:17:48 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
	GNOME but with a few more flags we'd been using.
	
	* configure.in: use that instead of setting CFLAGS
	directly.
	
	* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
	  src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
	
Thu Mar 01 16:00:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
	
	Fix from Richard W.M. Jones <rjones@redhat.com>

	* proxy/libvirt_proxy.c: include locale.h

Tue Feb 27 10:49:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Check POST reply for 'Cannot' to detect
	failure of core dump on Domain-0. Signed-off-by: Kazuki Mizushima

Tue Feb 27 10:35:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/virsh.c: Fix SEGV when doing tab-completion of commands
	which have no arguments (eg, nodeinfo<TAB>).

Tue Feb 27 10:25:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/virsh.c: Fix command line argument parsing to make
	the '-t' argument work. Signed-off-by: Saori Fukuta

Tue Feb 27 10:20:43 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Only hardcode port = 5900+domid if
	running against old XenD < 3.0.3, because in newer XenD
	port is guarenteed to be available in XenStore if the VNC
	server is running.

Mon Feb 26 15:33:08 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c, qemud/uuid.[ch]: move qemudParseUUID()
	into uuid.c
	
Mon Feb 26 15:31:23 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/uuid.[ch]: add uuid generation code

	* qemud/Makefile.am: build it

	* qemud/conf.c: generate a UUID if not specified in the XML
	
Mon Feb 26 15:20:56 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: qemudAutostartConfigs(): print the detailed
	error message from a guest/network autostart failure.
	
Mon Feb 26 14:20:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: check for malloc failure in GenerateXML()
	and GenerateNetworkXML()

	* qemud/driver.c: free the XML output after returning it
	from the DumpXML() commands.
	
Fri Feb 23 12:14:34 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/driver.c, qemud/internal.h, qemud/qemud.c, qemud/conf.c,
	qemud/conf.h: Added code to detect QEMU version number. Adapt
	command line construction code to use correct options for VNC
	and KQEMU based on version number

Fri Feb 23 10:52:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/Makefile.am: Fix up name of init script in EXTRA_DIST
	target.
	* libvirt.spec.in: Update path to libvirt_qemud and add the
	init script & post/pre scripts to register with chkconfig

Fri Feb 23 14:32:54 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: don't load config files unless they have
	a ".xml" suffix, e.g. backup files ... we spew a warning
	later if we do.
	
Fri Feb 23 12:49:11 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/libvirtd.in: add init script for libvirt_qemud

	* qemud/Makefile.am: install it unless we were configured
	with --with-init-scripts=none

	* configure.in: add --with-init-scripts to allow us
	have different flavour init scripts
	
Fri Feb 23 12:46:44 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: add --pid-file and default to writing
	out a PID file to /var/run/libvirt_qemud.pid in daemon
	mode.

	* configure.in: add --with-pid-file arg
	
Fri Feb 23 12:45:08 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/Makefile.am: install libvirt_qemud in /usr/sbin
	instead of /usr/libexec
	
	* src/Makefile.am, src/qemu_internal.c: pass the correct
	path to libvirt
	
Fri Feb 23 10:26:24 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/virsh.c: in "start" and "net-start" use e.g.
	vshCommandOptDomainBy() so that we actually get an
	error message if the domain/network isn't found.
	
Fri Feb 23 09:11:53 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: actually autostart guests/networks at startup
	as appropriate.
	
Fri Feb 23 09:08:02 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/internal.h: put the config directory paths in
	an array in order to make them easier to initialize,
	but still expose pointers to each of them as members
	in the server struct.

	* qemud/qemud.c: cleanup the config directory path
	initialization.
	
Fri Feb 23 09:03:19 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/driver.c: maintain the autostart flag on disk
	using symlinks from the "autostart" directories to
	the corresponding config files.

	* qemud/internal.h: add paths to the autostart links
	to the vm/network structures and paths to the autostart
	dirs to the server struct.

	* qemud/qemud.c: initialize the server autostart dir
	patches.

	* qemud/conf.h: expose qemudEnsureDir()

	* qemud/conf.c: check the autostart symlinks when
	loading config files at startup.
	
Fri Feb 23 09:00:13 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
	requests and replies to the protocol.

	* src/qemu_internal.c: hookup the qemu driver autostart
	methods

	* qemud/dispatch.c, qemud/driver.[ch], internal.h: add
	the daemon side, but just set an in-memory autostart
	flag for now.
	
Fri Feb 23 08:51:05 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/virsh.c: add "autostart" and "net-autostart" commands
	and cleanup the "list" and "net-list" commands a bit.
	
Fri Feb 23 08:49:12 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* include/libvirt/libvirt.h.in, src/libvirt.c add
	virDomainGetAutostart(), virDomainSetAutostart(),
	virNetworkGetAutostart() and virNetworkSetAutostart().

	* src/libvirt_sym.version: export the API
	
	* src/driver.h: add methods to the driver vtables.
	
	* src/proxy_internal.c,	src/qemu_internal.c,
	  src/test.c, src/xen_internal.c, src/xend_internal.c,
	  src/xm_internal.c, src/xs_internal.c: set those
	methods to NULL
	
Fri Feb 23 08:41:34 IST 2007 MarkMcLoughlin <markmc@redhat.com>

	* qemud/conf.[ch]: significantly re-factor qemudLoadConfigXML()
	so that "parse the XML", "assign the def to a VM" and
	"save the XML" operations are in separate functions.
	Add qemudRemoveInactiveVM() and qemudRemoveInactiveNetwork().
	Report errors when loading config files at startup. Check
	that a domain/network's name matches the config filename.
	
	* qemud/driver.c: update the Create() and Define() functions
	to explicitly parse/assign/save. Also, fix bug where if
	Create() failed, we would free the VM without removing it
	from the inactive list.
	
	* qemud/qemud.c: use qemudRemoveInactiveVM/Network()
	
Fri Feb 23 08:40:52 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/driver.[ch], qemud/dispatch.c: fix the fact that
	qemudDispatchDomainStart() doesn't report an error if the uuid
	lookup fails and also move the uuid lookup into the driver
	so that it matches the way we do Destroy().
	
Fri Feb 23 08:37:23 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c,	qemud/driver.c, qemud/internal.h,
	qemud/qemud.c: Merge the ->activevms and ->inactivevms
	into a single ->vms list in order to make things
	easier to manage. Likewise for networks. Also add
	qemudIsActiveVM() and qemudIsActiveNetwork() inline
	functions.
	
Thu Feb 22 14:06:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xm_internal.c, src/xend_internal.c: Re-arrange VM creation
	commands to ensure we destroy stillborn domains if device hotplug
	fails to complete. Fix deletion of inactive VMs from internal
	cache of domain configs.

Thu Feb 22 11:45:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/xs_internal.c: Refuse to do shutdown / reboot on
	Dom0 guest. Signed-off-by: Kazuki Mizushima
	<mizushima.kazuk@jp.fujitsu.com>

Thu Feb 22 10:37:08 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix another xml property leak.
	
Tue Feb 20 19:08:58 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: use strerror(errno) in some error messages
	to make them a bit more useful
	
Tue Feb 20 19:07:12 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: don't free active networks/vms if we
	fail to save the new config
	
Tue Feb 20 18:25:42 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* virsh.c: cmdNetworkList() re-indent this.
	
Tue Feb 20 17:49:22 IST 2007 Mark McLoughlin <markmc@redhat.com>

	Fix a few leaks

	* qemud/qemud.c: qemudCleanup(): free the socket
	structures

	* qemud/conf.c: fix various leaks in the xml parsing

	* qemud/iptables.c: fix a typo causing a leak
	
Tue Feb 20 16:49:53 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c, qemud/qemud.c: only create config dirs
	when actually trying to write out config.

Tue Feb 20 09:56:35 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/bridge.c: change the fix for the alignment warning
	a little.
	
Tue Feb 20 09:03:05 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: clean up qemudInitialize() and qemudListen()
	so as to coalesce the two "system vs. user" code paths and
	fix up some problems noticed by dan.
	
Mon Feb 19 16:59:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: don't shutdown guest and networks on
	SIGHUP
	
Mon Feb 19 16:58:53 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: handle SIGQUIT.
	
Mon Feb 19 09:38:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/bridge.c, qemud/conf.c: Fixed int -> char casts to deal
	with endianness / alignment issues on IA64 platforms. Patch 
	from Atsushi SAKAI <sakaia@jp.fujitsu.com>

Fri Feb 16 18:28:32 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
	qemud/conf.c, qemud/driver.c, configure.in: add a 
	qemudLog() function which uses syslog() if we're in daemon
	mode, doesn't output INFO/DEBUG messages unless	the
	verbose flag is set and doesn't output DEBUG messages
	unless compiled with --enable-debug. Also, make a first
	pass through fatal errors and add error messages for them.
	
Fri Feb 16 18:26:55 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/internal.h, qemud/qemud.c: improve signal handling
	and handle SIGHUP by shutting down all guests and networks
	and re-loading configs, and handle SIGINT and SIGTERM
	by shutting down cleanly.
	
Fri Feb 16 18:24:08 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c, qemud/bridge.c, qemud/iptables.c: fix
	our FD_CLOEXEC usage so that all fds which should be
	closed on exec are marked as such and that we leave
	exec() to do the actual closing.
	
Fri Feb 16 18:23:15 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: fix qemudEnableIpForwarding() to not leak
	an fd if writing to /proc/sys/net/ipv4/ip_forward fails.
	
Fri Feb 16 11:56:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* tests/Makefile.am: Fixed linkage of test suites

Fri Feb 16 11:03:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/driver.h, src/proxy_internal.c, src/qemu_internal.c,
	src/test.c, src/xen_internal.c, src/xend_internal.c,
	src/xm_internal.c, src/xs_internal.c: Remove the unused
	'init' method from the internal driver API (from Rich Jones)

Fri Feb 16 10:36:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/internal.h, qemud/qemud.c, libvirt.spec.in: Remove
	mistaken references to gnutls.

Thu Feb 15 19:07:24 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix <interface type='network'> output
	
Thu Feb 15 19:06:56 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix the <graphics> output - we weren't
	handling sdl
	
Thu Feb 15 19:06:22 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix a couple of typos
	
Thu Feb 15 19:05:48 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix segfault
	
Thu Feb 15 19:04:10 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.h: move qemudFreeVMDef() down a bit
	
Thu Feb 15 16:00:05 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/bridge.c: don't output bridge parameters if they
	are the default.
	
Thu Feb 15 15:56:32 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.[ch], qemud/dispatch.c, qemud/internal.h,
	  qemud/qemud.c, qemud/driver.c: allow re-defining network
	configs; basically copying dan's patch for domains.
	
Thu Feb 15 15:47:46 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: fix a couple of qemud_vm_def leaks

	* driver.c: simplify qemudDomainDefine()
	
Wed Feb 14 17:01:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/qemud.c: Ensure we create the main libvirt config
	directory at startup

Wed Feb 14 16:47:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* qemud/conf.c: Fixed generation of <features> block, and
	don't include ID, or VNC port in inactive XML generation

Wed Feb 14 16:45:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/qemu_internal.c: Fixed path to the libvirt_qemud
	daemon for auto-start

Wed Feb 14 19:53:33 CET 2007 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in: spec cleanup and missing BuildRequires
	* qemud/Makefile.am: avoid -Werror

Wed Feb 14 19:06:26 CET 2007 Daniel Veillard <veillard@redhat.com>

	* configure.in NEWS include/libvirt/libvirt.h docs/* docs/apibuild.py:
	  prepare release of 0.2.0, update doc, avoid console module for API.
	* po/*: regenerated

Wed Feb 14 12:35:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* libvirt.spec.in: Added dep on libsysfs-devel. Pre-create
	the qemu config dir & socket dir.

Wed Feb 14 12:19:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/qemu_internal.c, qemud/qemud.c: Move configs into
	/etc/libvirt/qemu or $HOME/.libvirt/qemu and the socket into
	$HOME/.libvirt/qemud-sock or /var/run/libvirt/qemud-sock

Wed Feb 14 12:19:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* python/generator.py: blacklist  vshRunConsole method from
	the python bindings

Wed Feb 14 12:17:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* po/libvirt.pot, po/*.po: Updated the i18n strings wrt to
	the recent code changes

Wed Feb 14 11:58:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>

	* src/qemud.c, src/conf.c, src/internal.c, src/driver.c: Change
	the handling of the internal VM config to allow replacing of the
	config for a VM which is running.

Wed Feb 14 16:53:25 IST 2007 Mark McLoughlin <markmc@redhat.com>

	Fix from Richard W.M. Jones <rjones@redhat.com>

	* virsh.c: add a colon after the connect arg to
	getopt_long()
	
Wed Feb 14 16:48:24 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/qemu_internal.c: correctly register the network
	driver
	
Wed Feb 14 16:35:56 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* autogen.sh: run autoheader before automake
	
Wed Feb 14 16:23:25 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/iptables.[ch]: add code for managing iptables
	rules.

	* qemud/Makefile.am: add iptables.[ch].
	
	* qemud/qemud.c: add and remove iptables rules as
	appropriate.
	
	* qemud/conf.c: when starting a guess, add a rule
	allowing it to forward packets across the networks
	bridge.
	
	* qemud/internal.h: add iptables context ptr
	
	* configure.in: add --with-iptables-dir and
	--with-iptables-prefix to allow us to put our rules
	in a chain with the given prefix and save the rules
	in files in the given dir so as to integrate with
	the proposed "service iptables restart" solution
	in:
	
	   https://bugzilla.redhat.com/227011
	
Wed Feb 14 16:21:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/xml.c: with <interface type="network"> connect the
	Xen guest to the appropriate bridge.
	
Wed Feb 14 16:17:51 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* include/libvirt/libvirt.h.in, src/libvirt.c: add
	virNetworkGetBridgeName() to allow finding out what
	bridge to connect to in order to join a network.
	
	* src/driver.h: add networkGetBridgeName() to vtable.
	
	* qemud/protocol.h: add the request and reply to
	the qemud protocol.
	
	* qemud/dispatch.c, qemud/driver.[ch]: handle them
	here.
	
	* src/qemu_internal.c: implement GetBridgeName()
	in the qemu driver.
	
	* src/libvirt_sym.version: add new symbol.
	
Wed Feb 14 16:14:32 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/xend_internal.c, src/xm_internal.c: pass the
	connection to virDomainParseXMLDesc()
	
	* src/xml.[ch]: make virDomainParseXMLDesc accept
	a virConnectPtr so that we can use it later to
	lookup the bridge associated with a network
	
	* tests/xml2sexprtest.c: just pass NULL here, it's
	safe
	
Wed Feb 14 16:08:55 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: add support for connecting a qemu
	guest to a bridge using a tap device in order to
	connect it to a virtual network.
	
	* qemud/internal.h: add <interface type="network">
	config and track tapfds so as to not close them
	on exec.
	
	* qemud/qemud.c: don't close tapfds on exec and
	disconnect the iface when the guest shuts down.
	
Wed Feb 14 16:04:48 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c, qemud/internal.h: add dhcp config
	
	* qemud/qemud.c: start dnsmasq to provide dns/dhcp
	for virtual networks.
	
Wed Feb 14 16:02:23 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* configure.in: add --disable-bridge-params, check
	for libsysfs and various kernel headers

	* bridge.[ch]: add code for managing bridges
	
	* qemud/Makefile.am: add bridge.[ch] and link against
	libsysfs if enabled.
	
	* qemud/conf.c: add support for bridge config.
	
	* qemud/internal.h: add various bridging bits

	* qemud/qemud.c: implement qemudStartNetworkDaemon()
	and qemudShutdownNetworkDaemon().
	
Wed Feb 14 15:55:02 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.[ch]: implement parsing and saving network
	configs.

	* qemud/driver.c: flesh out the stubs
	
	* qemud/internal.h: add networks list etc. to
	struct qemud_server
	
	* qemud/qemud.c: add qemudStartNetworkDaemon() and
	qemudShutdownNetworkDaemon() stubs.
	
Wed Feb 14 15:52:34 EST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/protocol.h: add the protocol for virtual networks

	* qemud/dispatch.c: implement the protocol

	* qemud/driver.[ch]: add stubs for the driver

	* qemud/internal.h: add struct qemud_network

	* src/qemu_internal.c: add a virtual networks driver
	
Wed Feb 14 15:43:28 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/virsh.c: add the net-* commands.
	
Wed Feb 14 15:37:17 IST 2007 Mark McLoughlin <markmc@redhat.com>

	Note: potential ABI break here, but people should
	only really be using virError structs returned from
	libvirt itself.

	* include/libvirt/virterror.h: add virNetwork
	to virError
	
	* src/internal.h, src/virterror.c: add network param
	to __virRaiseError()
	
	* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
	src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
	src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
	src/xs_internal.c: update.
	
Wed Feb 14 15:33:05 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* include/libvirt/libvirt.h.in: add the networks APIs
	
	* include/libvirt/virterror.h: add some error codes
	
	* src/driver.h: add network driver vtable
	
	* src/hash.c: add networks hash
	
	* src/internal.h: add virNetwork

	* src/libvirt.c: hook up the APIs to the network
	driver
	
	* src/libvirt_sym.version: add the new APIs
	
	* src/virterror.c: handle the new error codes
	
Wed Feb 14 15:07:26 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/conf.h: fix merge error - remove the argc argument
	from qemudBuildCommandLine()
	
Wed Feb 14 15:03:22 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/virsh.c: Re-name some of the VSH_DOMBYFOO stuff
	to VSH_BYFOO in order to re-use it for the network stuff.
	
Wed Feb 14 14:58:35 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/hash.c, src/internal.h: Re-name virConnect->domains_mux
	to virConnect->hashes_mux since it will also be used to
	protect the networks hash.
	
Wed Feb 14 14:57:52 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: qemudSaveConfig() will always report a
	more specific error, so	we should avoid overwriting
	this error.
	
Wed Feb 14 14:54:25 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/qemud.c: Re-factor out qemudExec() so that it can
	be used to launch dnsmasq.

	* qemud/conf.c: don't return argc from qemudBuildCommandLine()
	as exec() doesn't need it.
	
Wed Feb 14 14:52:12 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: Re-factor bits of conf.c so that:

	  - qemudMakeConfigPath() can be re-used given another configDir
	  - split qemudEnsureConfigDir() out of qemudSaveConfig() so
	    that it may be re-used to create another configDir
	  - split qemudScanConfigDir() out so that qemudScanConfigs()
	    can scan multiple configDirs
	
Wed Feb 14 14:50:22 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c: handle an unspecified MAC address, 
	fix the argv freeing code in qemudBuildCommandLine()
	and fix copy and paste error in qemudGenerateXML()
	
Wed Feb 14 14:42:38 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/internal.h: add virConnect->qemud_fd so that
	xen and qemu don't share the handle member.

	* src/hash.c, src/qemu_internal.c: update
	
Wed Feb 14 14:40:52 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* qemud/conf.c, qemud/dispatch.c, qemud/driver.c,
	  qemud/qemud.c: include autoconf's config.h
	
Wed Feb 14 14:39:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* conf.[ch]: rename from config.[ch] so we can use
	autoconf's config.h

	* Makefile.am: update

	* driver.c, qemud.c: upd.
	
Wed Feb 14 14:33:22 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* autogen.sh: run autoheader

	* config.h.in: remove
	
Tue Feb 13 19:46:35 EST 2007 Daniel Berrange <berrange@redhat.com>

	* autobuild.sh: Run coverage tests during automated build
	* autogen.sh: Point aclocal at m4 directory explicitly
	* configure.in: Added command line arg to enable coverage
	* Makefile.am: Added scripts directory
	* src/Makefile.am: Build with coverage testing if requested
	and add target for extracting coverage data
	* scripts/*: Helper tools for coverage testing
	* tests/Makefile.am: Make tests link to object files instad
	of the static library to ensure single output dest for
	coverage data when running tests

Tue Feb 13 19:29:35 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/qemu_internal.h, src/qemu_internal.c, src/Makefile.am,
	src/driver.h, src/libvirt.c: Added a new driver to talk to
	the QEMU daemon

	* src/virterror.c, include/libvirt/virterror.c: Added new
	error domain for QEMU.

	* qemud/*: Added a daemon service for managing QEMU machines
	via the libvirt qemu_internal driver

	* src/virsh.c: use a read-write connection by default for QEMU
	urls.

	* configure.in, Makefile.am: Added qemud subdirectory.

Thu Feb  8 12:59:14 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/xml.c, src/xend_internal.c, src/xend_internal.h: Remove
	obsolete / unused code.

Wed Feb  7 11:30:14 EST 2007 Daniel Berrange <berrange@redhat.com>

	* autobuild.sh, src/Makefile.am: Added a control file for
	automating build and test processes

Wed Feb  7 07:43:21 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/xml.c, tests/xml2sexprdata/*.sexpr: Also include the
	vcpu info in the (image (hvm))  part of the SEXPR for fully
	virt guests, so it gets passed on into QEMU.

Wed Feb  7 07:40:21 EST 2007 Daniel Berrange <berrange@redhat.com>

	* configure.in, tests/Makefile.am: Only enable the low level
	Xen tests if XenD is actually running & accessible via the
	UNIX socket

Sun Jan 28 14:44:23 EST 2007 Daniel Berrange <berrange@redhat.com>

	* sc/console.c, src/console.h, src/virsh.c: Rename the
	virRunConsole method to vshRunConsole to avoid it getting
	picked up in auto-generated python bindings

Fri Jan 26 07:59:52 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/virshtest.c: Fixed up for new way test driver enumerates
	domains

Fri Jan 26 06:53:52 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/virshc: Added 'console' and 'vncdisplay' commands to
	the virsh tool
	* src/console.c, src/console.h: Impl of a simple interactive
	serial console

Fri Jan 26 12:48:13 CET 2007 Daniel Veillard <veillard@redhat.com>

	* src/virsh.c: Richard W.M. Jones pointed out a missing option
	  in getopt_long()

Fri Jan 26 12:09:49 CET 2007 Daniel Veillard <veillard@redhat.com>

	* autogen.sh: applied patch from Richard W.M. Jones to not
	  output instructions if configure failed

Mon Jan 23 14:36:18 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* include/libvirt/libvirt.h.in: add VIR_UUID_BUFLEN and
	VIR_UUID_STRING_BUFLEN

	* libvirt/proxy/libvirt_proxy.c, libvirt/src/hash.c,
	libvirt/src/internal.h,	libvirt/src/libvirt.c,
	libvirt/src/proxy_internal.c, libvirt/src/test.c,
	libvirt/src/virsh.c, libvirt/src/xend_internal.c,
	libvirt/src/xm_internal.c, libvirt/src/xml.c,
	libvirt/python/libvir.c: use them

Mon Jan 23 12:28:42 IST 2007 Mark McLoughlin <markmc@redhat.com>

	Issues pointed out by Karel Zak <kzak@redhat.com>

	* src/virsh.c: fix up some syntax strings, use BUFSIZ
	and free names returned from virConnectListDefinedDomains()
	
Mon Jan 22 15:41:52 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: Fix crash in 'connect' command by ensuring
	we always strdup the connection URI string.

Mon Jan 22 16:23:52 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/internal.h: virDomain.handle refers to the "id"
	in the API, so re-name to virDomain.id to avoid
	confusion.

	* src/hash.c, src/libvirt.c, src/proxy_internal.c, src/test.c,
	src/xen_internal.c, src/xend_internal.c, src/xm_internal.c,
	src/xml.c, src/xs_internal.c: update for rename.

Mon Jan 22 16:17:25 IST 2007 Mark McLoughlin <markmc@redhat.com>

	* src/driver.h: remove Free(), GetName(), GetID() and
	GetUUID() driver methods.

	* src/proxy_internal.c,	src/test.c, src/xen_internal.c,
	src/xend_internal.c, src/xm_internal.c,	src/xs_internal.c:
	Update driver vtables.

Mon Jan 22 16:24:54 CET 2007 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in docs/*.html include/libvirt/libvirt.h:
	  preparing release of 0.1.11
	* docs/Makefile.am libvirt.spec.in: package libvirt.rng in
	* po/*: translation update

Fri Jan 19 15:28:13 EST 2007 Daniel Berrange <berrange@redhat.com>

	* tests/xmconfigtest.c: Test suite to check conversion from
	XML to XM config files, and the reverse
	* tests/xmconfigdata/*.xml: Source XML files for the test
	suite
	* tests/xmconfigdata/*.cfg: Source XM config files for the
	test suite
	* configure.ac, tests/Makefile.am: Added xmconfigdata subdir
	* tests/xmconfigdata/Makefile.am: Include config files when
	doing a make dist.

Fri Jan 19 15:23:13 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/xm_internal.c: Finished off the conversion from XML
	to XM config files, and the reverse, to deal with all known
	libvirt guest config options.

Fri Jan 19 15:07:13 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/conf.c: Free stored config parameters, when free'ing
	the virConfPtr object. For values, only free the object
	corresponding to the values' type

Thu Jan 18 16:12:13 EST 2007 Daniel Berrange <berrange@redhat.com>

	* docs/testnode.xml, docs/testdomfc4.xml: Tweak memory settings to
	be more realistic for testing purposes

Thu Jan 18 16:05:13 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/test.h, src/test.c: Implement full inactive domain management
	support in mock hypervisor to allow testing of apps wanting inactive
	domains.

Thu Jan 18 13:37:02 EST 2007 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Tweak some of the new inactive domain methods
	to only run when XenD is >= 3.0.4, so it falls back correctly to
	the src/xm_internal.c driver.

Wed Jan 10 16:20:02 CET 2007 Daniel Veillard <veillard@redhat.com>

	* docs/libvirt.rng: udated for the upcoming KVM and QEmu support

Wed Jan 10 11:06:36 CET 2007 Daniel Veillard <veillard@redhat.com>

	* docs/libvirt.rng: went through the existing tests with the RNG and
	  fixed or added a number constructs

Tue Jan  9 17:28:18 CET 2007 Daniel Veillard <veillard@redhat.com>

	* docs/libvirt.rng: first version of the Relax-NG schemas to validate
	  XML instances

Wed Dec 20 15:56:38 CET 2006 Daniel Veillard <veillard@redhat.com>

	* po/*: updated localization files
	* configure.in NEWS libvirt.spec.in docs/libvir.html docs/news.html
	  include/libvirt/libvirt.h: preparing release of 0.1.10

Tue Dec 19 12:26:53 EST 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/xm_internal.c: Maintain hash of config filenames, separate from
	hash mapping domain names to config files. This deals with case of two
	config files specifying same named guest, which although not recommended
	seems to be encountered 'in the wild'.

Mon Dec 18 23:11:53 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: Dan Berrange pointed out a ref count bug
	  rhbz#143946 , patch applied

Thu Dec 14 10:58:00 CET 2006 Daniel Veillard <veillard@redhat.com>

	* po/*.po po/libvirt.pot: merged new ms transations, updated
	  with the current source.

Wed Dec 13 17:24:03 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Implement the ListDefinedDomains,
	NumOfDefinedDomains, DomainCreate ,DomainDefineXML, DomainUndefine
	APIs to manage inactive domains when running with Xen 3.0.4.  Make
	GetMaxMemory,  SetMaxMemory, SetMemory, GetInfo, SetVCPUs & DumpXML
	work with inactive domains. Cache xendConfigVersion when first
	connecting to Xend.
	* src/xend_internal.h: Prototypes for new APIs
	* src/xm_internal.c: Updated for new way of getting xendConfigVersion
	data
	* src/internal.h: Added xendConfigVersion field for virConnect struct

Tue Dec 12 09:05:03 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Added support for vnclisten parameter
	in generated XML
	* src/xml.c: Support new style paravirt framebuffer graphics
	configuration from xen 3.0.4 tree. Also add support for setting
	vncpasswd & vnclisten address SEXPR values, based on passwd
	and listen XML attributes.
	* tests/sexpr2xmltest.c: Whitespace cleanup.
	* tests/xml2sexprtest.c: Added test cases for new style paravirt
	framebuffer graphics configuration
	* tests/xml2sexprdata/xml2sexpr-pv-vfb*: Data files for new
	tests for graphics
	* tests/sexpr2xmldata/sexpr2xml-pv-vfb-*.xml: Added listen address
	attribute

Thu Dec  7 12:28:03 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Add bounds checking in xenDaemonListDomains to
	avoid overflowing the 'ids' array.

Wed Dec  6 17:46:03 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Support parsing of new paravirt framebuffer
	graphics configuration from xen 3.0.4 tree.
	* test/sexpr2xmltest.c: Added test cases for new & old framebuffer
	config parsing in paravirt & fullyvirt.
	* test/sexpr2xmldata/sexpr2xml-pv-vfb-*: New test data files

Wed Dec  6 17:40:03 EST 2006 Daniel Berrange <berrange@redhat.com>

	* test/xml2sexprdata/xml2sexpr-curmem.xml, test/xml2sexprdata/xml2sexpr-curmem.sexpr:
	Fix test case to reflect recent change to bootloader/image handling

Wed Dec  6 15:06:28 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: the structure passed to the vcpuinfo hypercall
	  had changed between version 1 and version 2 too, the leading domain
	  field disapeared since it goes in the including op. Fixes redhat
	  bugs #217370 and #217743

Mon Dec  4 17:47:03 CET 2006 Daniel Veillard <veillard@redhat.com>

	* po/ca.po po/fr.po po/hi.po: merging more localizations coming
	  from Red Hat

Wed Nov 29 13:13:39 CET 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in libvirt.spec.in docs/libvir.html docs/news.html
	  include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
	* po/*.po: more updates and fix all the .po to not barf when msgfmt
	  tries to process them

Tue Nov 28 13:15:00 CET 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in: update for ALL_LINGUAS
	* po/*.po: updated with strings from Red Hat translators

Mon Nov 27 23:27:26 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: patch for rhbz#214741, when using pygrub 
	  do not push the os image information for domain creation
	  via xend

Wed Nov 22 17:57:58 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs//*: regenerated
	* include/libvirt/libvirt.h include/libvirt/libvirt.h.in src/driver.h
	  src/libvirt.c src/proxy_internal.c src/test.c src/virsh.c
	  src/xen_internal.c src/xend_internal.c src/xm_internal.c
	  src/xs_internal.c: added support for dumping core of domains 
	  assuming a xend with the latest patch to do so.

Tue Nov 21 18:05:33 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xs_internal.c: Michel Ponceau pointed out a bug in 
	  xenStoreDomainGetNetworkID refactoring

Mon Nov 20 16:51:43 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c src/xs_internal.c src/xs_internal.h: cleanup for the
	  dynamic device code to isolate as a separate function 
	  xenStoreDomainGetNetworkID() the access to the XenStore

Thu Nov 16 19:36:12 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xm_internal.c: Add support for device_model parameter to
	make HVM guests work. Also support serial console in HVM, since
	it needs to be explicitly turned on, unlike PV.

Thu Nov 16 18:16:42 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c: Mark 'msg' parameter in XML error handler as unused.
	Fix device id lookup code to use unsigned integers avoid type
	mis-matches.

Thu Nov 16 13:09:42 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/Makefile.am: Added new xm_internal.c source file
	* src/libvirt.c: Call the xenXMRegister() method to activate
	the XM backend
	* src/driver.h: Added a unique id for XM driver backend
	* src/internal.h:  Increase number of drivers allowed
	* src/xm_internal.h, src/xm_internal.c: New driver for
	managing inactive domains from /etc/xen config files

Thu Nov 16 18:18:12 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
	  src/driver.h src/libvirt.c src/libvirt_sym.version
	  src/proxy_internal.c src/test.c src/xen_internal.c
	  src/xend_internal.c src/xml.c src/xml.h src/xs_internal.c:
	  intagrated patch from Michel Ponceau to add hot-plug devices
	  support to the API, integrated in driver API and fixed
	  a few small things. Still a TODO in src/xml.c about 
	  moving xenstore direct accesses to a new routine.

Wed Nov 15 18:23:13 EST 2006 Daniel Berrange <berrange@redhat.com>

	* python/generator.py, python/libvir.c, python/libvirt-python-api.xml:
	Added binding for virConnectListDefinedDomains API.

Wed Nov 15 15:08:13 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xen_internal.c, src/xs_internal.c, src/xend_internal.c,
	src/proxy.c: Don't try to invoke APIs if domain is is < 0, letting
	these inactive domains be handled by other driver backend.
	* src/xend_internal.h: make xend_config_version() api available
	to other drivers

Wed Nov 15 14:59:13 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/hash.c, src/hash.h: Added three new methods for iterating
	over hashtable entries, virHashForEach, virHashRemoveSet &
	virHashSearch.

Wed Nov 15 14:52:01 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/conf.c, src/conf.h: Add two new APIs virConfNew() and
	virConfSetValue() for creating & populating new config objects
	in memory instead of from a file

Wed Nov 15 14:42:01 EST 2006 Daniel Berrange <berrange@redhat.com>

	* python/libvir.c, python/libvirt_wrap.h, python/types.h: Ensure
	that  unsigned longs are marshalled to python Long type instead
	of Int, to avoid 32-bit integer wraparound

Tue Nov 14 18:42:01 EST 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Added support for parsing non-bridge style
	networking configs for guests.
	* src/xml.c: Ensure the <ip address> element gets serialized to
	the SEXPR for non-bridged networks.
	* tests/xml2sexprtest.c, tests/sexpr2xmltest.c: Added new tests
	covering different networking configs
	* tests/xml2sexprdata/, tests/sexpr2xmldata/: Added more data
	files for new test cases

Mon Nov 13 17:18:00 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c src/xml.c: fix for shareable drive support
	  rhbz#214908

Fri Nov 10 17:53:41 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c: Fix memory leak, by freeing xmlParserContextPtr object

Fri Nov 10 11:19:32 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c src/xml.c: add an extra element currentMemory
	  to the XML description and handle its serialization back and
	  forth between XML and S-Expr
	* tests/sexpr2xmltest.c tests/xml2sexprtest.c 
	  tests/sexpr2xmldata/sexpr2xml-curmem.*
	  tests/xml2sexprdata/xml2sexpr-curmem.*: added specific regression
	  tests for this, this didn't disturb any of the other tests.

Thu Nov  9 15:39:19 CET 2006 Daniel Veillard <veillard@redhat.com>

	* python/generator.py: changed the generator to generate a reference
	  from Domain class instances to the Connect they were issued from
	  should fix rhbz#204490
	* docs//*: rebuilt

Thu Nov  9 10:22:43 CET 2006 Daniel Veillard <veillard@redhat.com>

	* tests/reconnect.c: fixed the reconnect test when running as non-root

Wed Nov  8 13:03:41 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virshdata/nodeinfo-custom.txt, docs/testnode.xml: Reduce amount
	of RAM in test node to a sensible size to avoid integer wraparound on
	32-bit archs.

Wed Nov  8 13:00:56 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/test.c, src/test.h: Added implementation of the virDomainGetOSType
	driver method to the test hypervisor backend.

Wed Nov  8 16:58:56 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt/virterror.h src/virterror.c src/xend_internal.c
	  src/xml.c: give proper indication of the failures raised by the
	  XML parser on not well formed XML, should fix rhbz#208545

Wed Nov  8 14:01:11 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/proxy_internal.c src/xs_internal.c: fix the
	  patch for rhbz#214264 in the case of Domain 0 on Xen and push the
	  defaulting to "linux" down to the xen specific parts.

Tue Nov  7 16:17:23 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* python/generator.py: Pass in connection object when generating
	an exception
	* python/libvir.py: Allow raw error object to be passed into the
	python exception object.
	* python/libvir.c: Added binding for virGetLastError and
	virConnGetLastError

Tue Nov  7 15:58:43 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Ensure that virConnectPtr object is passed
	around to all functions which can throw errors, so that errors get
	correctly associated with the connection, rather than global error
	variables.

Tue Nov  7 16:33:43 CET 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in: libvirt-devel depends on pkgconfig
	* proxy/libvirt_proxy.c src/libvirt.c src/proxy_internal.[ch]
	  src/xs_internal.[ch]: the virtGetOsType entry point was calling
	  the xenstore directly instead of going though driver, refactored
	  and implemented a specific new RPC with the proxy when this is
	  called as non-root fixes rhbz#214264 .

Tue Oct 31 10:31:34 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: when getting informations about a non
	  existant domain, it is not a good idea to raise the HTTP
	  404 GET error, the handling is better done somewhere up in
	  the stack.

Tue Oct 24 15:31:23 EDT 2006 Daniel P.Berrange <berrange@redhat.com>

	* python/generator.py, python/libvir.c: Drop python interpreter
	lock when calling into C functions, and re-grab when invoking
	error callback.
	* python/libvirt_wrap.h: Convenience macros for grabbing / dropping
	the python interpreter lock in threaded environment.


Mon Oct 16 17:10:15 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* config.h.in configure.in libvirt.spec.in docs/libvir.html
	  docs/news.html include/libvirt/libvirt.h: preparing release of
	  libvirt-0.1.8
	* src/xen_internal.c: fixed a compilation problem

Thu Oct 12 17:31:13 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: one of the fix for system with page size != 4k
	  was missing

Thu Oct 12 13:37:24 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: applied patch from Philippe Berthault
	  fixing the vcpu number initialization

Wed Oct 11 17:16:44 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: applied patch from Peter Vetere so that
	  crashed domains ain't reported as shut off.

Wed Oct 11 16:23:58 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* virsh.1: fixed some typo and unclear language pointed out by 
	  Noriko Mizumoto

Mon Oct  9 09:34:42 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/xml.c, src/xend_internal.c: Added support for a <driver>
	element in disk specification, allowing use of alternate Xen
	drivers such as blktap.
	* tests/xml2sexprtest.c, tests/sexpr2xmltest.c: Added tests for
	new <driver> element, and blktap driver impl.
	* tests/xml2sexprdata/*, tests/sexpr2xmldata/*: New / updated
	data files for new <driver> element

Fri Oct  6 10:33:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Fixed memory leak in xend_get_config_version
	routine.
	* src/xml.c: Fixed memory leaks in XML parsing routines relating
	to VNC port, HVM boot devices, HVM floppy & CDROM, HVM features,
	disk device type.
	* tests/Makefile.am: Use --leak-check=full when running valgrind
	to detect all leaks, in addition to memory corruption checks
	* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Fixed memory leaks
	in test harness leading to valgrind false-positives.

Mon Oct  2 23:16:06 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: Daniel Berrange fixed some mlock size problem
	  doing a bit of cleanup too

Fri Sep 29 17:31:36 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/virsh.c: add #include <locale.h> to be able to compile without
	  optimization

Fri Sep 29 17:16:40 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: fix for system with page size != 4k

Fri Sep 29 13:05:12 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs/bugs.html docs/libvir.html: added pointers on how to report
	  bugs in bugzilla as suggested by markmc
	* src/xend_internal.c: first step for #208545 raise an error at the
	  libvirt level

Fri Sep 29 11:27:36 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.7

Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xen_internal.c: Fork different version of getdomaininfo struct for
	Xen 3.0.2, and 3.0.3 because the shared_info_frame field is different
	size on between these versions on 32-bit platforms. Make callers use
	appropriate struct version matched to hypervisor version, hiding detail
	in macros to aid readability. Cleanup whitespace to remove tabs. Disable
	xenHypervisorGetVcpus completely in proxy since its not used.

Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Check if the physical CPU will fit in the maplen
	provided by the caller when populating VCPU<->CPU mapping. This is because
	XenD will return data for 32 physical CPUs, even if the box only has 4
	CPUs. The caller of course will only have allocated a map big enough for
	the actual number of physical CPUs. We simply check against maplen param
	supplied by caller & discard info about CPUs which don't fit. Also santise
	whitespace.

Fri Sep 22 11:02:48 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.6

Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* Makefile.am: Added po directory
	* autogen.sh: Call autopoint to install the gettext infrastructure
	* src/*.c, proxy/*.c: Pass all strings through gettext for translation.
	Set up the text domains in libvirt, proxy & virsh at startup.
	* libvirt.spec.in: Include compiled .po files in distro
	* tests/virshdata/*.txt: Tweak expected data to take account of
	some text changes.

Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* docs/*.html: re-generated documentation to pull in latest
	APIs

Thu Sep 21 10:19:01 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am: add a tst target to ease building test progs
	* src/xend_internal.c: fix the reconnection problem to xend pointed
	  by Philippe Berthault
	* tests/Makefile.am tests/reconnect.c: add a specific test case

Tue Sep 19 16:59:53 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: applied patch from Jim Fehlig, about
	  one of the content of the hypercall structures in 3.0.2

Thu Sep 14 10:33:23 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c: Append :disk for normal disk devices being created
	when Xen >= 3.0.3, even though its technically optional
	* src/xend_internal.c: Strip the :disk trailing component when
	generating XML when Xen >= 3.0.3. We don't want to expose
	that postfix in the <target> element, since its already set in
	the device attribute on <disk> element.
	* tests/sexpr2xmldata/*, tests/xml2sexprdata/*: Update to test
	for handling of :disk postfix in sexpr/XML
	* tests/virshtest.c, tests/sexpr2xmltest.c, tests/xml2sexprtest.c:
	Cast size_t arg to an int to avoid format warnings from printf

Tue Sep 11 20:37:28 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c: Added support for setting VNC port when creating
	domains with new (version 2) style XenD config
	* tests/xml2sexprtest.c: Added test for setting VNC port
	* tests/xml2sexprdata/*vncunused*: Data files for new VNC test

Tue Sep 11 20:23:42 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* docs/Makefile.am: Added test XML files to EXTRA_DIST
	* tests/confdata/Makefile.am: Fix typo to ensure config
	files needed by test are distributed

Tue Sep 11 20:11:05 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c, src/xml.c: Added support for new 3.0.3
	style XenD cdrom configuration for HVM guests.
	* configure.in, tests/Makefile.am: Added new test directories
	* tests/xml2sexprdata*, tests/sexpr2xmldata*: Removed config files
	for test suite.
	* tests/xml2sexprdata/*, tests/sexpr2xmldata/*: New home for test
	suite config files

Tue Sep  5 13:50:05 MYT 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in docs//* include/libvirt/libvirt.h libvirt.specx.*:
	  preparing release 0.1.5
	* proxy/libvirt_proxy.c src/xen_internal.c: tiny fixes

Tue Sep  5 13:24:30 MYT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: finished to convert to the new hypervisor
	  calls the xenHypervisorGetVcpus entry point, though it is untested

Mon Sep  4 14:13:24 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xen_internal.h: Added missing return(-1) statements
	in xenHypervisorGetVcpus and xenHypervisorPinVcpu methods.
	#ifndef out the pause/resume/etc methods from proxy code
	
Sun Sep  3 12:50:12 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/conf.c: Allow '_' in variable names, and don't fail if there
	is a trailing ',' at the end of a list.
	* tests/confdata/fc4.conf, tests/confdata/fc4.out: Expand test 
	config to include a '_' in a name, and a trailing ',' in a list.
	
Sun Sep  3 12:47:42 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* tests/.cvsignore, tests/confdata/.cvsignore: Ignore autogenerated
	files from config data testsuite.
	
Sun Sep  3 12:34:23 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: use the return value of virConnectListDomains when
	iterating over list of ids/names, because it is not neccessarily
	the same as the value returned by virConnectNumOfDomains. Use qsort
	to sort active domains by Id, and inactive domains by name, since 
	there is no guarenteed sort ordering when listing domains. For inactive
	domains display a '-' instead of '-1' to make it clear they have no
	sensible ID number.
	
Sat Sep  2 22:28:18 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: converting to handle the new incompatible 
	  hypercalls while still able to detect older versions, lot of
	  work, seems okay, there is just one function not yet converted
	* src/xs_internal.c: dropping virConnectCheckStoreID()

Wed Aug 30 09:34:45 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: Added --all & --inactive flags to list command to control
	inclusion of inactive domains in listing. Added start, define, undefine
	commands to allow management of inactive domains.

Wed Aug 30 09:30:23 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/driver.h: Defined new driver entry points for ListDefinedDomains,
	NumOfDefinedDomains, DomainStart, DomainUndefine, DomainDefineXML.
	* src/xen_internal.c, src/xend_internal.c, src/xs_internal.h,
	src/test.c, src/proxy_internal.c: Added NULL entries for new driver
	backend APIs.
	* src/libvirt.c: Hook up new driver entry points to corresponding
	public API.
	* src/libvirt_sym.version: Added  virConnectNumOfDefinedDomains and
	previously missing virConnectListDefinedDomains
	* include/libvirt/libvirt.h: Added virConnectNumOfDefinedDomains

Tue Aug 29 23:48:43 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/conf.c: add missing entry point virConfGetValue()

Tue Aug 29 23:28:31 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* TODO libvirt.spec.in: update
	* configure.in include/libvirt/virterror.h src/Makefile.am
	  src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
	  adding a subset of Xen config file parser, and serializer
	* tests/Makefile.am tests/conftest.c tests/test_conf.sh
	  tests/confdata/Makefile.am tests/confdata/fc4.conf
	  tests/confdata/fc4.out: adding test program for config in and out

Tue Aug 29 13:14:20 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Add handling of HTTP 500 error code
	which can be returned by XenD do indicate failure error when
	performing the requested operation (Identified by Pete Vetere).

Tue Aug 29 15:41:46 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* python/libvir.c: Pete Vetere pointed out a bug in string cast
	  when handling errors in Python

Sat Aug 26 16:36:15 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/sexpr.c src/sexpr.h src/xend_internal.c src/xml.c: applied
	  patch from Jeremy Katz to add graphical console for PV Xen guests

Sat Aug 26 00:17:24 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs/site.xsl docs/*.html: add links to virt-manager

Fri Aug 25 17:42:12 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: Allow VIRSH_DEFAULT_CONNECT_URI to be set to
	override the default Xen connection attempt in favour of a
	different backend. Fix 'virsh list' so that it doesn't assume
	there is always a Domain-0 (a Xen-ism).
	
Thu Aug 24 16:43:47 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* tests/virshtest.c: Test suite for validating output / operation
	of various virsh commands.
	* tests/virshdata/*.txt: Known good output for validating results
	during testing
	* tests/testutils.h, tests/testutils.c: Added convenience method
	for forking a child process & capturing its output.
	* tests/Makefile.am: Enable POSIX / XOpen standards

Thu Aug 24 11:03:42 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* tests/Makefile.am: Added a 'valgrind' target which simply
	calls 'make check', but wrapping execution with valgrind to
	detect any errors

Thu Aug 24 10:04:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* tests/xml2sexpr.c, tests/sexpr2xml.c: New tests suites for
	validating the SEXPR<->XML conversion
	* tests/*.sexpr, tests/*.xml: Data files for test suite
	* src/xend_internal.h, src/xend_internal.c: Expose the method
	for converting SEXPR -> XML to allow use by unit tests
	* src/xs_internal.c: Check if connection is NULL before
	deferencing it - test suite passes in NULL.

Mon Aug 21 13:00:03 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: check return code of virConnectListDomains in case
	there was a failure, and stop the 'list' command immediately
	rather than continuing with bogus domain ID data.

Fri Aug 18 15:22:23 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c: fix networking in paravirt guests - only set the
	'(type ioemu)' option for HVM.

Thu Aug 17 19:42:50 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: fix virParseUUID()

Wed Aug 16 19:07:52 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in doc//* include/libvirt/libvirt.h
	  include/libvirt/libvirt.h.in: preparing release of 0.1.4,
	  regenerated docs, fixed a few things
	* src/proxy_internal.c src/test.c src/xend_internal.c:
	  a few trivial fixes

Wed Aug 16 12:33:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/virsh.c: Added 'setvcpus', 'setmem', 'setmaxmem'
	commands to virsh shell. Allow full read-write connection
	to non-Xen test hypervisor.

Wed Aug 16 11:38:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/test.c, src/test.h: Allow a hypervisor config to be
	loaded from an external XML file. Implement drivers for
	setMemory, setMaxMemory, createLinux, dumpXML, setVcpus.
	* docs/testnode.xml, docs/testfc4.xml, docs/testfv0.xml:
	Example config for using with test driver

Wed Aug 16 11:36:21 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c, src/xml.c, src/xml.h: Refactored the
	sexpr_uuid method into a re-usable virParseUUID method which
	can be used by any backend

Wed Aug 16 11:31:59 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/libvirt.c: Remove some duplicated changes for VIR_DOMAIN_RO
	accidentally left in place from last checkin. Tell the drivers to
	be 'quiet' when opening a RW connection, to stop XenD driver 
	complaining when we open the test driver.
	
Wed Aug 16 17:24:59 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt/virterror.h src/libvirt.c src/virterror.c: enforce
	  blocking operations with side effect on read-only connections. Adds
	  a new error code and message.

Tue Aug 15 11:55:15 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xml.c, src/xend_internal.c: Added a <features> block
	to XML allowing enablement of guest CPU / system features.
	Currently support PAE, ACPI, APIC for HVM domains.
	* docs/libvir.html: Documented new <features> block and those
	features enabled for HVM guests

Mon Aug 14 10:55:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* docs/libvir.html, docs/format.html: Updated description of
	HVM boot device, and disk device configuration to match up
	new new behaviour from previous changes

Fri Aug 11 09:37:02 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/libvirt.c: Avoid duplicated attempts to shutdown or
	pause a domain if the first attempt succeeded.
	* src/xend_internal.c, src/xml.c: When parsing UUID from
	SEXPR also allow for format without any embedded '-'. The
	ioemu: prefix is no longer required for HVM domains. It is
	added when generating SEXPR, and removing when parsing SEXPR
	never appearing in XML. CDROM & floppy devices for HVM domains
	are now included in XML under <devices><disk> tag. The <disk>
	tag now has a 'device' attribute allowing one of 'floppy',
	'cdrom', 'disk' to be specified. If the <console> tag is present
	in XML, HVM domains get a serial console activated. <boot>
	tag now expects one of 'fd' 'hd' or 'cdrom' when specifying
	boot device preference. Increased size of XML doc buffer from
	1k to 4k to deal with large numbers of devices

Fri Aug 11 13:08:01 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in: updated python detection code from latest libxml2 one
	* docs//*: rebuilt the docs

Thu Aug 10 15:28:52 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: markmc pointed out that using number(xpath) could lead
	  to NaN and following comparison would be wrong in a couple of places
	  if the element looked at was missing.

Wed Aug  9 10:17:03 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/driver.h, src/libvirt.c: Made the virDomainGetXMLDesc
	method use the driver backends.
	* src/xend_internal.c: Surround all functions which are not
	needed for proxy with #ifndef PROXY. Refactor XML generator
	functions to allow calling from proxy based on domain id
	instead of virDomainPtr object
	* src/xs_internal.c, src/xs_internal.h: Change signature
	of method for extracting VNC port & console TTY to use domain
	id instead of virDomainPtr. Surround functions not used by
	proxy in #ifndef PROXY
	* src/xml.c:Surround functions not used by proxy in #ifndef PROXY
	* src/test.c, src/xen_internal.c: Added NULL entry for new
	driver method for fetching XML
	* src/proxy_internal.c, src/proxy_internal.h, proxy/libvirt_proxy.c:
	Added implmentation of virDomainGetXMLDesc driver method which
	goes via proxy.

Tue Aug  8 23:24:51 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/driver.h src/libvirt.c src/proxy_internal.c src/test.c
	  src/xen_internal.c src/xend_internal.c src/xend_internal.h
	  src/xml.c src/xs_internal.c: cleanups, force the new vCPU
	  and affinity entry point to go though the driver framework,
	  and fix a few warning showing up in my pedantic environment.

Mon Aug  7 18:33:45 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Added details of serial console TTY to XML
	representation of domain. Fetch VNC port from xenstore if it is
	available (only in xen 3.0.3 or later).
	* src/xs_internal.c, src/xs_internal.h: Added APIs for retrieving
	the serial console TTY and VNC server port from xenstore.
	* docs/libvir.html: Document 'port' attribute for VNC graphics,
	and '<console>' element for serial console.

Mon Aug  7 21:57:41 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated with new items

Mon Aug  7 14:57:12 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Corrected string length calculation when
	  appending a CDROM boot device element. Fixes corrupt XML structure.

Mon Aug  7 11:06:20 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: Added a 'port' attribute to the '<graphics>'
	tag when display type is VNC, providing the port number on which
	the VNC server is listening.

Mon Aug  7 18:47:48 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt/libvirt.h.in: previous change to libvirt.h should
	  have gone on .in too

Fri Aug  4 20:19:23 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/libvirt.c: Fix off-by-one in validated VCPU number (it is
	zero based, not one based).
	* include/libvirt/libvirt.h: Add some convenience macros for
	calculating neccessary CPU map lengths & total host CPUs
	* src/virsh.c: Add 'vcpuinfo' and 'vcpumap' commands

Fri Aug  4 14:45:25 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* python/generator.py: fix the generator when handling long integers
	  Dan Berrange reported problems due to this when using
	  virDomainSetMemory bindings

Fri Aug  4 11:49:44 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
	  src/libvirt.c src/libvirt_sym.version src/xen_internal.c
	  src/xen_internal.h src/xend_internal.c src/xend_internal.h:
	  applied patch from Michel Ponceau and Philippe Berthault for
	  virtual CPU and affinity support plus a bit of cleanup.

Tue Aug  1 16:22:52 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in: xen is now built for ia64, c.f. RH#199685

Fri Jul 28 16:18:30 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/virterror.c: Hugh Brock pointed out that error message
	  for bad argument were wrong and incomplete, this should fix it and
	  a few other problems in error reporting

Mon Jul 24 14:34:15 IST 2006 Mark McLoughlin <markmc@redhat.com>

	* libvirt.spec.in: sync changes from fedora CVS

Thu Jul 20 09:05:15 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* proxy/Makefile.am src/xen_internal.c src/xend_internal.c: cleanup
	  code when compiled for the proxy, changed the command line macro and
	  remove warnings.

Wed Jul 19 17:26:48 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/*.c: Bulk replace 'informations' with 'information' to
	correct English spelling

Thu Jul 13 23:33:48 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: applied patch from Peter Vetere to pass down the
	  UUID from the XML description if present when creating the domain.

Tue Jul 11 18:03:51 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in docs/* NEWS: preparing release of
	  libvirt-0.1.3
	* src/xend_internal.c: uninitialized var and disable TCP slow start 

Mon Jul 10 14:19:52 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs/format.html docs/libvir.html docs/news.html: updated the XML
	  format documentation to cover the new HVM domains.

Mon Jul 10 12:27:17 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c src/xml.c: patches from Jim Fehlig for HVM
	  guests, plus XML format changes and merge from Mark McLoughlin

Fri Jul  7 09:47:14 EDT 2006 Daniel Berrange <berrange@redhat.com>

	* src/xend_internal.c: changed xenDaemonLookupByID to simply do
	an sexpr GET on /xend/domain/[ID] instead of listing all names
	and iterating over /xend/domain/[NAME]. Reduces the running time
	and number of GETs from O(n^2) to O(n).

Wed Jul  5 17:11:32 IST 2006 Mark McLoughlin <markmc@redhat.com>

	* xml.c: allow a <domain> to not have any <disk> devices - e.g.
	when using an NFS root.

Thu Jul  6 10:32:14 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: fixed xenDaemonOpen() to try both unix and
	  http accesses by default and to use the provided URI otherwise,
	  applied Jim Fehlig patch working around xend connection close bug
	* autogen.sh: fixed package name

Wed Jul  5 17:11:32 IST 2006 Mark McLoughlin <markmc@redhat.com>

	* xml.c: make the entire <os> node optional if a bootloader
	is specified. If we pass an image config to xend, the
	bootloader gets ignored anyway.
	
Wed Jul  5 16:51:45 IST 2006 Mark McLoughlin <markmc@redhat.com>

	* xml.c: only set bootloader flag when we actually get
	a bootloader
	
Tue Jul  4 13:50:55 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in proxy/Makefile.am: do the chown at the rpm packaging
	  level, to allow build as non-root
	* src/xml.c: fix bug #197583 raised by markmc

Mon Jul  3 15:41:58 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS docs/* configure.in libvirt.spec.in include/libvirt/libvirt.h:
	  preparing release of 0.1.2
	* src/proxy_internal.c: don't warn on open if using http and not the
	  proxy.

Mon Jul  3 13:54:03 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in proxy/Makefile.am src/proxy_internal.c 
	  src/xen_internal.c: fixing the proxy installation, integrate in
	  the spec file and fix a few bugs in the proxy, seems to behave 
	  correctly now.
	* docs/apibuild.py docs/*: fixing the doc and API generator

Mon Jul  3 11:21:10 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* proxy/libvirt_proxy.c src/proxy_internal.[ch] src/xend_internal.[ch]:
	  finished the last entry point missing for the proxy code.

Fri Jun 30 16:31:47 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* proxy/libvirt_proxy.c src/proxy_internal.c: more bug fixes,
	  virsh starts to work normally over the proxy. Still one entry
	  point missing but it's minor.

Thu Jun 29 23:57:35 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* proxy/libvirt_proxy.c src/proxy_internal.c src/xen_internal.c
	  src/xen_internal.h src/xend_internal.c src/xend_internal.h:
	  implemented id based lookup and other cleanups, virsh starts to
	  work, but still some TODOs

Thu Jun 29 22:19:51 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/proxy_internal.c src/proxy_internal.h src/driver.h src/libvirt.c
	  src/Makefile.am: moved proxy/proxy.h and proxy/proxy_client.c as
	  proxy_internal.[ch] and integrated them as a new driver.
	* proxy/Makefile.am proxy/libvirt_proxy.c src/xen_internal.c 
	  src/xen_internal.h src/xend_internal.c: various related cleanups.

Thu Jun 29 14:53:01 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* proxy/libvirt_proxy.c proxy/proxy.h proxy/proxy_client.c: more
	  progresses on the proxy implementation.
	* src/xend_internal.c src/xend_internal.h: exported one routine

Wed Jun 28 19:23:25 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in Makefile.am proxy/Makefile.am proxy/libvirt_proxy.c
	  proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
	  src/xend_internal.c: started working on a proxy to access xend
	  for unpriviledged users to avoid opening xend HTTP service to
	  serve those read-only operations.

Mon Jun 26 16:05:27 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in docs/examples/* include/Makefile.am
	  include/libvirt/virterror.h python/generator.py python/libvir.c 
	  python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
	  src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
	  src/xml.c src/xml.h: moved the includes from include/ to
	  include/libvirt to reflect the installed include tree. This
	  avoid using "" in the includes themselves.

Wed Jun 21 14:41:04 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS libvirt.spec.in docs/*: preparing release of 0.1.1

Wed Jun 21 13:02:30 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/driver.h src/libvirt.c src/test.c src/xen_internal.c
	  src/xend_internal.c src/xs_internal.c: add driver numbers and
	  tweak a bit suspend/resume/destroy operation to avoid doing
	  them directly though the hypervisor if other succeeded first.

Wed Jun 21 12:23:15 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: try to autodetect the Xen hypervisor version
	  used and switch automatically. A bit nasty though.

Tue Jun 20 16:14:26 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c: fix breakage introduced in Xen changeset 10277
	  
Fri Jun 16 15:08:42 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xen_internal.c src/xen_internal.h src/xs_internal.c: fix
	  a TODO in xs_internal.c pointed out by Philippe Berthault

Fri Jun 16 12:44:02 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xen_internal.c src/xend_internal.c: more driver 
	  related cleanups, nearly finished

Thu Jun 15 14:57:39 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xend_internal.c src/xend_internal.h
	  src/xs_internal.c: more cleanups for the driver architecture

Wed Jun 14 18:59:30 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/test.h, src/test.c: Added implementation of the reboot
	and shutdown methods for domains.

Wed Jun 14 11:20:23 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/libvirt.c: connect virDomainDestroy, virDomainSuspend,
	virDomainResume, virDomainShutdown & virDomainReboot to the
	driver backends.

Wed Jun 14 15:51:00 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xend_internal.c src/xend_internal.h: cleaned up
	  virConnectListDomains and virConnectNumOfDomains, implemented xend
	  driver entry point for them.

Wed Jun 14 13:10:03 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c: Daniel P. Berrange pointed out a bug in virConnectOpen

Tue Jun 13 14:06:01 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/virsh.c: use 'double' instead of 'float' when calculating
	'CPU time' field for dominfo command, to ensure no unneccessary
	loss of precision converting from nanoseconds to seconds.

Tue Jun 13 18:35:22 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xen_internal.c src/xend_internal.c
	  src/xs_internal.c: fix the connection and GetType initialization.

Tue Jun 13 16:37:27 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* docs//*: rebuilt the documentation
	* src/driver.h src/libvirt.c src/test.c src/xen_internal.c 
	  src/xend_internal.c src/xs_internal.c: started to fix some of
	  the driver related problem raised by Daniel Berrange, added a
	  ver version field to drivers.

Mon Jun 12 17:22:24 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/xend_internal.c: Call 'xenDomainGetVersion' when trying
	to open a connection, as a sort of "ping" test to verify the
	Xen daemon connection - fail the open method, if the "ping" is
	not successful.

Mon Jun 05 22:31:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/test.c, src/test.h: New 'mock' hypervisor driver providing
	a way to write predictable unit tests which exercise libvirt APIs.
	* src/libvirt.c, src/Makefile.am: Integrate test hypervisor driver

Fri May 26 11:59:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/hash.c, src/internal.h: Switch the uuid parameter in virGetDomain
	  to be of type 'unsigned char' since its a raw UUID we're passing in,
	  not a printable one.
	* src/libvirt.c: Remove bogus "unsigned char" -> "char" type casts. Hook
	  up the "domainLookupByID", "domainLookupByUUID", "domainLookupByName"
	  and "domainGetInfo" driver backend functions.

Mon May 29 17:02:26 CEST 2006 Karel Zak <kzak@redhat.com> 

	* src/libvirt_sym.version: added in missing symbols referenced by python
	  bindings (patch by Daniel P. Berrange)
	* tests/Makefile.am: fixed include dirs to make VPATH builds work
	  (patch by Daniel P. Berrange)

Mon May 29 16:33:39 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/virsh.c: improved vshCommandOptDomain(), added <name> to the 
	  connect command and minor changes to Daniel B.'s patch

Fri May 26 11:40:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>

	* src/virsh.c: added 'domuuid' command to display printable UUID
	  string for a domain. Added '--connect' argument to allow the name
	  of the hypervisor connection passed to virConnect to be set.

Mon May 22 15:34:20 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/virsh.c: added UUID: to the dominfo command, vshPrint() refactoring,
	  added support for domain look up by UUID
	* virsh.1: added information about UUID, fixed list of commands and 
	  domains statuses
	* src/libvirt.c include/libvirt.h.in src/libvirt_sym.version: added
	  virDomainGetUUIDString() and virDomainLookupByUUIDString()

Wed May 10 15:50:32 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/virterror.c include/virterror.h: added VIR_FROM_RPC
	* src/xmlrpc.c: added checks and _virRaiseError()

Wed May 10 13:17:00 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/xml.c src/xml.h: added virBufferNew() and virBufferStrcat()
	* tests/xmlrpctest.c: added performace tests for virBufferStrcat() and 
	  virBufferVSprintf()
	* src/xmlrpc.c: used virBufferStrcat()

Tue May  9 16:37:22 CEST 2006 Karel Zak <kzak@redhat.com>

	* tests/Makefile.am tests/xmlrpctest.c tests/testutils.h: added test 
	  directory with basic test utils
	* tests/test_xmlrpc.sh tests/xmlrpcserver.py tests/xmlrpctest.c: added
	  simple XML-RPC tests agains Python SimpleXMLRPCServer
	* src/xmlrpc.c src/xmlrpc.h: minor refactoring, fixed gcc warnings
	* src/xml.c src/xml.h: added virBufferFree()

Fri Apr 28 18:31:49 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/hash.c src/internal.h src/libvirt.c src/virterror.c
	  src/xml.h include/libvirt.h[.in] include/virterror.h: started
	  adding new APIs, some still TODO, and not tested yet

Thu Apr 27 14:17:04 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c src/xend_internal.c TODO: added uuid to the XML
	  serialization

Wed Apr 26 08:32:38 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: applied patch from Jeremy Katz to not require a 
	  root entry in XML nor try to extract it from command line
	  informations.

Wed Apr 26 07:45:28 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* docs//* : fixed perl binding URL to point to CPAN as provided by
	  Daniel P. Berrange.

Tue Apr 25 17:56:32 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in: patch for ncurses fallback from Jim Fehlig

Tue Apr 25 17:10:10 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in docs/examples/Makefile.am 
	  docs/examples/index.py docs/examples/python/*: integrated
	  examples for Python from David Lutterkort

Tue Apr 25 13:37:22 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: applied patch from Jim Fehlig when parsing
	  domain S-Expr the kernel may not be provided (Dom0)

Mon Apr 24 18:23:29 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/hash.c src/internal.h: add virGetDomainByID() to speed up
	  some processing but not used yet
	* src/libvirt.c src/xen_internal.c src/xen_internal.h: added domain
	  listing and number queries entry points based on the hypervisor
	  which should speed up some processing as root.

Thu Apr 20 14:31:13 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: fix an uninitialized memory access in error
	  reporting.

Thu Apr 13 17:19:25 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt.h include/libvirt.h.in doc/*: added new entry point
	  virDomainSetMemory to set up the target memory use for a domain
	* src/driver.h src/libvirt.c src/xen_internal.c src/xend_internal.[ch]
	  src/xs_internal.[ch]: added a new entry point in the drivers for this,
	  also fixed the xen store entry, as changing
	  /local/domain/$$/memory/target affects the target memory not the max,
	  apparently max is not visible at the xenstore level (or I missed it)

Mon Apr 10 15:15:13 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in libvirt.spec.in docs/*: documented and
	  regenerated for release of 0.1.0
	* Makefile.am virsh.1: added man page from Andrew Puch

Mon Apr 10 09:32:29 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c src/xml.c: applied patch from Jim Fehlig
	  for lifecycle events
	* docs/format.html docs/libvir.html: added the associated docs for
	  the new constructs
	* TODO: small update

Sun Apr  9 13:10:34 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* TODO src/hash.[ch] src/internal.h src/libvirt.c src/xend_internal.c
	  src/xs_internal.c: implementing domain pointers unification, thread
	  safety and reference counting for domain and connections, this was
	  the last critical change needed before making further progresses at
	  the API level. Still a couple fo things TODO for this, unification
	  at the Python level and adding UUID to hash. All domain/connect alloc
	  and free routines are now centralized in hash.c
	* docs/APIchunk1.html docs/libvirt-api.xml docs/libvirt-refs.xml
	  docs/html/libvirt-libvirt.html: regenerated the docs, that doesn't
	  change the API.

Thu Apr  6 11:32:46 CEST 2006 Karel Zak <kzak@redhat.com> 

	* src/virsh.c: use stdout for standard outputs, improve 
	 allocation checks

Wed Apr  5 09:32:54 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* src/hash.c: tiny fix
	* src/internal.h: starting to work on reentrancy
	* src/libvirt.c: applied patch from Jim Fehlig to fix 
	  virDomainLookupByID when run as root.

Tue Apr  4 22:49:33 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/virsh.c: rename dstate, idof and nameof to domstate, 
	  domname and domid

Tue Apr  4 12:41:53 CEST 2006 Karel Zak <kzak@redhat.com>

	* src/virsh.c: add new command "nodeinfo"
	* include/libvirt.h.in: fix typo (virNodeInfo.memory is in kB)
	* docs/FAQ.html docs/libvir.html src/virsh.c: rename command 
	  "dinfo" to "dominfo"

Mon Apr  3 14:46:39 EDT 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt.h[.in] src/driver.h src/libvirt.c 
	  src/libvirt_sym.version src/*_internal.[ch]: added an entry
	  point for reboot and corresponding driver plug
	* src/virsh.c: added a reboot option using it
	* docs/*: regenerated 

Thu Mar 30 16:38:18 EST 2006 Daniel Veillard <veillard@redhat.com>

	* src/xend_internal.c: applied patch from Daniel P. Berrange,
	  plus a bit of code cleanup

Thu Mar 30 16:04:47 EST 2006 Daniel Veillard <veillard@redhat.com>

	* src/virsh.c: allocation check (Jim Meyering) and adding a
	  new create command
	* src/xend_internal.c src/xml.c: trying to cope with the new 
	  xvda domains states generated on FC5, but Dom0 bootloader
	  really break the model, so that doesn't work.

Thu Mar 30 12:15:46 EST 2006 Daniel Veillard <veillard@redhat.com>

	* src/virsh.c: catching memory allocation error and existing, as
	  pointed by Jim Meyering

Wed Mar 29 16:36:24 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* doc/*: rebuilt

Wed Mar 29 13:34:25 EST 2006 Daniel Veillard <veillard@redhat.com>

	* python/libvir.c: fixed a bug in the new wrapper
	* python/tests/Makefile.am python/tests/node.py: added a new test for
	  the new API
	* python/tests/create.py: remove a debug

Wed Mar 29 14:43:56 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt.h[.in] include/virterror.h src/driver.h
	  src/internal.h src/libvirt_sym.version src/xen_internal.c
	  src/xs_internal.c: added a new entry point to get node hardware
	  informations virGetNodeInfo, and associated driver hook.
	* src/xend_internal.c: implemented the node and version information
	  hooks for the Xen Daemon
	* python/libvir.c python/libvirt-python-api.xml python/generator.py:
	  also added Python bindings for the new call

Tue Mar 28 16:40:08 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* python/libvir.c: call the initialize entry point
	* src/libvirt_sym.version: add initialize entry point
	* src/libvirt.c: make sure we always initialize the lib
	* python/tests/*.py: start updating exemple for exception
	  handling as pointed by Jim Meyering

Tue Mar 28 11:49:59 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* doc/site.xsl doc/libvir.html doc/*: added informations about
	  the Perl bindings, regenerated
	* python/libvirt_wrap.h: added a missing include. 

Mon Mar 27 17:22:16 CEST 2006 Daniel Veillard <veillard@redhat.com>

	* doc/*: updated module list and rebuilt
	* include/libvirt.h include/libvirt.h.in: added intialization function
	* include/virterror.h src/virterror.c: one more error code
	* src/internal.h: first part of Jim's format checking
	* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]
	  src/xs_internal.[ch]: initialization and registration of drivers
	
Sat Mar 25 11:45:06 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am: add  driver.h to SOURCES as pointed by Jim Meyering
	* doc/*: rebuilt

Sat Mar 25 11:38:29 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/virterror.c: add message as pointed by Jim Meyering

Fri Mar 24 23:57:56 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/virterror.h: fix typos pointed by Jim Meyering

Fri Mar 24 23:36:05 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/virterror.h: applied patch from Daniel Berrange for out of
	  tree compiles.

Fri Mar 24 14:17:52 CET 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.pc.in: applied patch from Daniel Berrange to fix --cflags

Fri Mar 24 14:03:26 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am: fix out of tree build

Thu Mar 23 16:40:37 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xs_internal.c src/xs_internal.h include/virterror.h 
	  src/virterror.c: created a new module related to Xen Store accesses
	* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]:
	  nearly completed the separation of the code from the different modules

Wed Mar 22 14:43:16 CET 2006 Daniel Veillard <veillard@redhat.com>

	* python/tests/create.py: add one more image path
	* src/libvirt.c src/xend_internal.c src/xend_internal.h: more work
	  on the xend refactoring

Wed Mar 22 13:34:32 EST 2006 Daniel Veillard <veillard@redhat.com>

	* python/tests/create.py: adapt to new naming scheme in FC5

Tue Mar 21 00:40:29 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/driver.h src/xen_internal.c: just add a driver block for
	  the Xen hypervisor direct access module. Need to convert
	  xend_internal.[ch] and make one for the Xenstore now ...

Mon Mar 20 18:43:19 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/driver.h src/internal.h src/libvirt.c src/xen_internal.c
	  src/xen_internal.h docs/apibuild.py: starting the refactoring,
	  first the direct Xen hypervisor module. New header describing the
	  entry points of a driver.

Wed Mar 15 13:10:25 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/hash.c src/hash.h src/internal.h src/libvirt.c src/sexpr.c
	  src/sexpr.h src/virsh.c src/virterror.c src/xen_internal.c
	  src/xen_internal.h src/xend_internal.c src/xend_internal.h
	  src/xml.c src/xml.h: applied cb/indent to homogenize the source
	  style, as a first pass.

Fri Mar 10 11:07:58 CET 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in: applied patch for --with-xen-distdir option from 
	  Ronald Aigner
	* docs/site.xsl docs/*.html: added link to Bugzilla

Sat Mar  4 09:59:13 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: another patch from David Lutterkort fixing a typo
	  when generating physical block devices descriptions.

Sat Mar  4 09:56:18 CET 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.spec.in: applied patch from David Lutterkort adding
	  missing reqs for readline.

Tue Feb 28 15:21:48 CET 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in libvirt.spec.in include/libvirt.h docs/*:
	  preparing release 0.0.6

Tue Feb 28 14:57:25 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/errors.html docs/libvir.html docs/*: added a page about
	  error handling and regenerated the docs

Tue Feb 28 13:12:50 CET 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* python/Makefile.am python/generator.py python/libvir.c 
	  python/libvir.py: improved python binding, raise exception 
	  when an instance creation or lookup fails, and add support
	  for the global error handler, per conn handler still needed
	* python/tests/error.py python/tests/Makefile.am: adding a
	  regression test

Mon Feb 27 17:36:29 EST 2006 Daniel Veillard <veillard@redhat.com>

	* doc//*: rebuilt

Mon Feb 27 17:33:16 EST 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated, and added python hooks for error handling
	* include/virterror.h src/virterror.c src/xml.c: error interception
	  and reporting should be done.

Mon Feb 27 16:42:46 EST 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xen_internal.[ch]: virConnectOpenReadOnly()
	  should not emit error when failing to open the hypervisor proc
	  entry point.

Mon Feb 27 16:32:55 EST 2006 Daniel Veillard <veillard@redhat.com>

	* include/virterror.h src/libvirt_sym.version: exported
	  virDefaultErrorFunc()
	* src/sexpr.c src/xen_internal.c src/virterror.c include/virterror.h:
	  adding more error reporting though the code, nearly complete.
	* src/sexpr.c: added specific error function to avoid an error report.

Mon Feb 27 14:56:57 EST 2006 Daniel Veillard <veillard@redhat.com>

	* include/virterror.h src/virterror.c src/xend_internal.c: more work
	  plugging in the error system in the code.

Mon Feb 27 17:25:48 CET 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* include/virterror.h src/internal.h src/libvirt.c src/virterror.c
	  src/xend_internal.c: commiting a first pass at adding error handling
	  in the code, not finished, but it starts to work, need more coverage
	  and testing.

Fri Feb 24 23:33:55 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am src/internal.h src/libvirt.c src/libvirt_sym.version
	  src/virterror.c include/Makefile.am include/virterror.h: adding
	  the public APIs for errors, callbacks and synchronous. The boring
	  stuff is still left to do, plugging it. Also need to be exposed
	  at the python level.
	* doc//*: rebuilt

Fri Feb 24 22:17:12 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/index.py docs/search.php: fixing the search engine.

Fri Feb 24 13:25:36 CET 2006 Daniel Veillard <veillard@redhat.com>

	* python/generator.py python/libvir.c python/libvirt-python-api.xml:
	  UUID strings can contain zeroes, so the autogenerated conversion
	  functions don't work.

Thu Feb 23 06:24:46 EST 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c: fixing a bug before the release of 0.0.5
	* python/generator.py python/libvir.c python/libvirt-python-api.xml:
	  also fixing the binding for getting a domain UUID
	* python/tests/Makefile.am python/tests/uuid.py: added a test
	  for the new UUID API

Thu Feb 23 11:41:06 CET 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in docs/libvir.html docs/news.html: preparing the
	  release of 0.0.5
	* include/libvirt.h.in: fixed APIs definition

Thu Feb 23 05:31:46 EST 2006 Daniel Veillard <veillard@redhat.com>

	* python/tests/Makefile.am: added the create.py in the regression tests

Thu Feb 23 05:13:03 EST 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvirt.h[.in] src/libvirt.c src/xend_internal.[ch]
	  src/libvirt_sym.version: added virDomainLookupByUUID and
	  virDomainGetUUID to be able to use the persistant UUID names
	* docs//*: rebuilt the docs following the API extension

Wed Feb 22 11:53:45 CET 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in docs/Makefile.am docs/devhelp/*:
	  added devhelp docs support, based on libxml2 stylesheets

Wed Feb 22 09:57:11 CET 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* libvirt.spec.in: package the examples in the doc
	* src/Makefile.am: forgot to add xml.h

Tue Feb 21 22:00:11 CET 2006 Karel Zak <kzak@redhat.com>

	* TODO: added virsh part

Tue Feb 21 09:14:07 EST 2006 Daniel Veillard <veillard@redhat.com>

	* Makefile.am: extended make tests to run those in docs/examples
	* docs/examples/suspend.c docs/examples/*: added an example of
	  suspend/resume and regenerated

Tue Feb 21 14:21:39 CET 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* python/tests/Makefile.am: fix a small PYTHONPATH bug 
	* docs//*: fixed the xsl a bit for toc names, added doc for
	  the python bindings, regenerated

Tue Feb 21 00:06:30 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvirt.c src/xend_internal.c src/xend_internal.h: move the
	  XML dump function around to make sure all entry points are centralized
	  in libvirt.c and also avoid doc generation troubles.
	* docs/examples/Makefile.am docs/examples/index.py: fix the makefile
	  a bit.
	* TODO: updated
	* docs/format.html: added a description of the XML used for the
	  domains.
	* docs//*: rebuilt

Mon Feb 20 21:48:55 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/examples/examples.xsl docs/examples/index.html
	  docs/site.xsl: integates the examples page in the web site
	* docs//* : fixed generator and rebuilt the docs
	* python/tests/basic.py python/tests/create.py: couple cleanups

Mon Feb 20 12:20:32 EST 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* include/libvirt.h include/libvirt.h.in: cleanup
	* src/libvirt.c: remove debugging output
	* src/xend_internal.c src/xml.c src/xml.h: reimplement 
	  virDomainGetXMLDesc() based on xend interface, now work as user too.

Fri Feb 17 08:17:36 EST 2006 Daniel Veillard <veillard@redhat.com>

	* python/tests/create.py: trying to make test more generic, but it's
	  difficult since it requires a system image
	* src/libvirt.c src/xend_internal.c: fixed the shutdown API which
	  was broken due to a bad reason at the xend level.

Thu Feb 16 17:47:00 EST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in src/Makefile.am: adding dependency to libxml2
	* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
	  src/xml.[ch]: added XML parsing for Xen domain descriptions
	  needed for creates, plugged in a converter to s-exp and
	  xend call. Modified the virDomainCreateLinux() to reflect
	  that XML based description. Seems to work.
	* python/tests/create.py: added a test case which seems to work
	  not tested much yet
	* docs/*: regenerated

Wed Feb 15 08:20:23 EST 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvirt.spec.in include/libvirt.h.in python/Makefile.am
	  src/Makefile.am: fix rpm packaging problems whith head, more 
	  LIBVIR -> LIBVIRT changes.

Tue Feb 14 15:29:01 EST 2006 Daniel Veillard <veillard@redhat.com>

	* Makefile.am configure.in python/Makefile.am python/tests/Makefile.am
	  python/tests/basic.py: added first python test script and 
	  a 'make tests' target

Fri Feb 10 16:45:50 CET 2006 Daniel Veillard <veillard@redhat.com>

	* libvirt.pc.in: Karel pointed out the name hadn't been updated

Fri Feb 10 11:30:41 EST 2006 Daniel Veillard <veillard@redhat.com>

	* python/libvir.c: fixed one more problem prior to 0.0.4

Fri Feb 10 11:21:53 EST 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS configure.in docs/libvir.html docs/news.html include/libvirt.h
	  libvirt.spec.in: preparing 0.0.4 release

Fri Feb 10 11:09:11 CET 2006 Daniel Veillard <veillard@redhat.com>

	* README TODO config.h.in libvirt.pc.in: more cleanups.

Fri Feb 10 09:42:45 CET 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS docs/*: regenerated and updated the docs post 0.0.3 release

Fri Feb 10 09:39:23 CET 2006 Daniel Veillard <veillard@redhat.com>

	* autogen.sh configure.in: fixed snapshot autogeneration, had to
	  tweak a few things

Wed Feb  8 11:43:43 EST 2006 Daniel Veillard <veillard@redhat.com>

	* //* : renamed the project libvirt , this affects all makefiles,
	  the specs, the icons, the docs, etc ...
	* configure.in: prepare for 0.0.3

Fri Feb  3 15:47:32 CET 2006 Karel Zak <kzak@redhat.com>

	* src/virsh.c: fix order of the save command options

Tue Jan 31 19:12:19 CET 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in docs/examples/*: starting to add examples. the XSLT
	  still need to be fixed for web site

Tue Jan 31 11:22:51 CET 2006 Daniel Veillard <veillard@redhat.com>

	* python/*: update of the python bindings, fix names, add
	  missing features like list of domains and domain info extraction

Tue Jan 31 11:21:56 CET 2006 Daniel Veillard <veillard@redhat.com>

	* configure.in libvir.spec.in NEWS docs/*: commiting the state of 0.0.2
	  release

Sun Jan 29 11:55:13 CET 2006 Daniel Veillard <veillard@redhat.com>

	* NEWS docs/news.xsl: added stylesheet to generate NEWS file
	* docs/*: updated docs preparing for the release

Sun Jan 29 09:52:03 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/site.xsl docs/*.html: credits to Diana Fong for graphics
	  and web site design

Sat Jan 28 21:24:05 CET 2006 Daniel Veillard <veillard@redhat.com>

	* python/libvir.c: fix a stupid bug in python bindings (DomainDestroy
	  is still mishandled though)

Fri Jan 27 09:58:31 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c src/xml.c: applied patch from Anthony Liguori
	  to remove the XenStore transactions as this is not needed
	  anymore.

Thu Jan 26 13:10:43 CET 2006 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* docs/search.php: use the new web site design
	* python/generator.py: fix a generation bug on python keyword

Tue Jan 24 11:44:53 CET 2006 Karel Zak <kzak@redhat.com> 

	* src/libvir_sym.version: add virDeomainRestore and virDomainSave
	* src/virsh.c: support '=' in options, fix command grammar 
	* src/libvir.c: add conn->xshandle checks

Tue Jan 24 14:09:37 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c: Karel pointed out handle was lost in
	  virConnectOpenReadOnly()

Mon Jan 23 23:53:07 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/site.xsl docs/*.png docs/*.html: update the images from Diana,
	  added favicon to page.
	* src/libvir.c: reorganized the include imports.

Mon Jan 23 14:23:16 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/*: augment and try to complete the doc in its current state

Sun Jan 22 17:26:20 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/*: started to augment and update the documentation

Sat Jan 21 23:33:46 GMT 2006 Daniel Veillard <veillard@redhat.com>

	* docs//*: mostly finished the revamp in the plane, starts to look good

Fri Jan 20 16:48:05 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/* : total revamp of the web site based on Diana Fong design
	  but not completely integrated yet

Fri Jan 20 10:57:44 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h include/libvir.h.in src/libvir.c: revamped the
	  restore API (though it would be better if it was returning
	  a domain pointer in case of success)
	* src/virsh.c: added save and restore to the commands, tested,
	  the option handling need work though

Thu Jan 19 11:21:57 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c src/xend_internal.c src/xend_internal.h: continue
	  the integration of more xend based accesses, virsh seems to work
	  without accessing the xen store now.

Wed Jan 18 19:57:53 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c: small change w.r.t. reboot.

Wed Jan 18 11:32:04 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h include/libvir.h.in src/libvir.c: more integration
	  of libxend capabilities, including checkpointing and restoring 
	  in a file.
	* docs//*: regenerated the docs

Tue Jan 17 17:53:43 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h[.in]: added VIR_DOMAIN_CRASHED status, small
	  doc fix
	* src/virsh.c: fix a integer being formatted as %s in idof
	* src/internal.h src/libvir.c src/xend_internal.[ch]: started to
	  integrated the xend back-end, especially for getting informations
	  about a domain.

Fri Jan 13 17:39:24 CET 2006 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h.in include/libvir.h src/internal.h src/libvir.c
	  src/xend_internal.c src/xend_internal.h: starting to plug the
	  xend code in, replacing structures mostly, but not finished.

Thu Jan 12 16:36:21 CET 2006 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am src/xend_internal.c src/xend_internal.h:
	  added more of Anthony Liquori libxend code, commented and reformatted
	  this still need to be plugged, it's still dead code ATM.

Wed Jan 11 14:57:01 CET 2006 Daniel Veillard <veillard@redhat.com>

	* docs/libvir.html: grammatical fix
	* src/Makefile.am src/sexpr.c src/sexpr.h: starting to integrate
	  Anthony Liquori libxend code
	* src/libvir.c: fix an uninitialized value

Wed Dec 21 17:58:45 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/architecture.* docs/*: added a section on the architecture
	  and regenerated the docs.

Mon Dec 19 19:04:11 CET 2005 Daniel Veillard <veillard@redhat.com>

	* NEWS docs/libvir.html docs/news.html: preparing 0.0.1 release

Mon Dec 19 17:32:22 CET 2005 Daniel Veillard <veillard@redhat.com>

	* Makefile.am configure.in libvir.spec.in python/*: added a first
	  version for python bindings, heavilly based on libxml2/libxslt
	  way of doing things, maybe this need to be revisited. Added packaging
	  too.
	* src/hash.h: fixed the Copyright notice.

Fri Dec 16 19:35:29 CET 2005 Karel Zak <kzak@redhat.com>

	* src/xml.c src/internal.h src/libvir.c: struct checks cleanup, 
	  add macros VIS_IS_DOMAIN(), VIR_IS_CONNECT() and VIR_IS_CONNECTED_DOMAIN()

Fri Dec 16 14:26:05 CET 2005 Daniel Veillard <veillard@redhat.com>

	* libvir.spec.in src/Makefile.am: cleaned up the spec file, removed
	  static libraries, adding virsh as an installed program

Fri Dec 16 13:59:35 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/libvir_sym.version: oops forgot to export the new symbol

Fri Dec 16 13:15:04 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h include/libvir.h.in src/internal.h src/libvir.c:
	  adding the virDomainShutdown() API
	* src/virsh.c: adding a shutdown command
	* docs/*: regenerated

Fri Dec 16 01:43:18 CET 2005 Karel Zak <kzak@redhat.com>

	* include/libvir.h.in: add missing declaration of virDomainGetXMLDesc()
	* include/libvir.h.in src/libvir.c src/virsh src/libvir_sym.version: add 
	  virDomainGetOSType()
	* src/internal.h src/libvir.c src/xml.c: add internal function virDomainGetVM(), 
	  move virDomainGetVMInfo() from src/xml.c

Thu Dec 15 17:56:27 CET 2005 Karel Zak <kzak@redhat.com>

	* src/virsh.c: remove --id / --name options

Wed Dec 14 16:28:24 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: add dump of os/boot informations

Wed Dec 14 13:35:39 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: added dump of physical vbd and read-only status

Wed Dec 14 12:20:06 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/xml.c: started to add block devices and interfaces descriptions
	  in the XML dump.

Tue Dec 13 17:20:11 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h src/Makefile.am src/internal.h src/libvir.c
	  src/libvir_sym.version src/virsh.c src/xml.c: started working on
	  the XML dump, added a dumpxml virsh version and a bit of
	  infrastructure code. Found a way to detect dead ID from xenstore
	  data.

Mon Dec 12 14:21:18 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c src/xen_internal.c src/xen_internal.h: completing the
	  API implementation, only CreateLinux is now missing.

Fri Dec  9 15:39:18 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/search.php docs/index.py docs/*.xsl docs/html/*: fixed the
	  page generation, added the search engine.

Fri Dec  9 14:03:13 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/*: extended the documentation

Fri Dec  9 11:15:41 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in: adding --without-depends to make dist on non
	  Xenified machine.

Fri Dec  9 00:47:12 CET 2005 Daniel Veillard <veillard@redhat.com>

	* Makefile.am include/libvir.h.in libvir.pc.in: various fixes.
	* docs/*: regenerated the docs

Fri Dec  9 00:02:06 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/virsh.c: added support for suspend/resume/destroy, validating
	  the previous code.

Thu Dec  8 18:16:20 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c src/xen_internal.c src/xen_internal.h: implement
	  Pause, Resume, Destroy, but untested yet.

Thu Dec  8 17:43:11 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h src/libvir.c src/libvir_sym.version: adding
	  virDomainFree()
	* docs/*: regenerated the docs

Thu Dec  8 16:07:07 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in include/libvir.h.in include/libvir.h src/Makefile.am
	  include/Makefile.am: provide/fix library versionning information
	  include/libvir.h is now generated !
	* include/libvir.h.in src/libvir.c: revamp APIs and implement 
	  complete ones.
	* src/virsh.c: finish the version command and a bit of cleanup.

Thu Dec  8 15:20:57 CET 2005 Karel Zak <kzak@redhat.com>

	* src/virsh.c: code cleanup to prevent gcc warnings

Thu Dec  8 14:25:09 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in: activate pedantic flags
	* src/libvir.c src/libvir_sym.version src/xen_internal.[ch]
	  include/libvir.h: implementing hypervisor Version and Type interfaces
	* src/virsh.c: adding a version command, WIP

Thu Dec  8 11:19:48 CET 2005 Karel Zak <kzak@redhat.com>

	* src/Makefile.am src/virsh.c configure.in: adding readline support,
	  and implement basic commands to virsh.

Thu Dec  8 11:12:36 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/libvir.c src/xen_internal.c: fixed the new Xen hypervisor call

Wed Dec  7 19:09:48 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in src/Makefile.am src/libvir.c src/xen_internal.c
	  src/xen_internal.h: removed dependancy on xenctrl library, untested
	  yet.

Wed Dec  7 15:08:54 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/*: adding missing links to API page.

Wed Dec  7 14:43:28 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in libvir.spec.in docs/Makefile.am: make sure the
	  docs are installed and packaged in the -devel RPM
	* docs/api.xsl docs/newapi.xsl: forgot to commit API HTML stylesheets

Wed Dec  7 14:09:48 CET 2005 Karel Zak <kzak@redhat.com>
	* include/libvir.h src/libvir.c: adding xenConnectNumOfDomains()
	  to returns number of active domains.

Wed Dec  7 13:55:04 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/ChangeLog.awk docs/ChangeLog.xsl: Changelog handling from
	  libxml2 adapted to libvir
	* docs/* docs/html/libxml-libvir.html: regenerated

Wed Dec  7 11:58:20 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/* docs/html/*: more work on the docs generation
	* include/libvir.h: adding informations on the header

Wed Dec  7 10:31:29 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in docs/FAQ.html docs/Libxml2-Logo-90x34.gif
	  docs/Makefile.am docs/bugs.html docs/index.html docs/intro.html
	  docs/libvir.html docs/redhat.gif docs/site.xsl: starting to add
	  the web site, based on libxml2 one.
	* src/hash.c: add a missing include

Tue Dec  6 17:47:11 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/Makefile.am docs/apibuild.py docs/libvir-api.xml
	  docs/libvir-refs.xml: fix XML API generation
	* include/libvir.h src/libvir.c src/virsh.c: fix the info memory
	  API again, use KB, not bytes so that an unsigned long is sufficient.

Tue Dec  6 17:12:52 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h src/libvir.c src/virsh.c: adding the extraction
	  of the number of virtual CPUs for both interfaces.

Tue Dec  6 14:46:50 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h src/libvir.c src/virsh.c: tweaking of the 
	  GetInfo() API, returns bytes and nanoseconds, try to fix
	  the scales, but time on unpriviledged interfaces doesn't work.

Mon Dec  5 19:14:05 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libvir.h src/libvir.c src/libvir_sym.version src/virsh.c:
	  first pass at trying to implement virDomainGetInfo() quite a bit
	  of work left to do.

Mon Dec  5 12:15:16 CET 2005 Daniel Veillard <veillard@redhat.com>

	* Makefile.am README TODO autogen.sh configure.in libvir.pc.in
	  libvir.spec.in docs/Makefile.am docs/apibuild.py docs/structures.fig
	  include/Makefile.am include/libvir.h src/Makefile.am src/hash.c
	  src/hash.h src/internal.h src/libvir.c src/libvir_sym.version
	  src/virsh.c: renamed to libvir

Fri Dec  2 15:15:26 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libxen.h src/libxen.c src/libxen_sym.version: adding
	  xenConnectListDomains() to list active domains
	* src/xensh.c: integrated a basic test for xenConnectListDomains()

Fri Dec  2 13:10:04 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in src/Makefile.am: more warnings from compiler and
	  link static in work environement

Thu Dec  1 18:32:43 CET 2005 Daniel Veillard <veillard@redhat.com>

	* Makefile.am configure.in docs/apibuild.py docs/libxen-api.xml
	  docs/libxen-refs.xml docs/structures.fig: starting to add docs
	  and the extraction tool
	* src/libxen.c: fixed comments error raised by apibuild

Thu Dec  1 17:34:23 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libxen.h src/libxen.c src/libxen_sym.version: add read-only
	  connections for normal users (but need /var/run/xenstored/socket_ro
	  to be chmoded to 666)
	* src/xensh.c: if not root use the RO access

Thu Dec  1 11:50:16 CET 2005 Daniel Veillard <veillard@redhat.com>

	* include/libxen.h src/libxen.c src/libxen_sym.version src/xensh.c:
	  changed entry points naming conventions based on feedback with
	  Karel Zak

Wed Nov 30 14:18:19 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/Makefile.am src/hash.[ch]: added hash module based on libxml2
	  one.
	* include/libxen.h src/libxen.c src/libxen_sym.version: extend API
	  start to access libxenctrl directly (need xen update to get includes)
	* src/xensh.c: access to both xenstore and hypervisor

Tue Nov 22 17:09:11 CET 2005 Daniel Veillard <veillard@redhat.com>

	* configure.in: checking xenstore library, error out on missing libs
	* include/libxen.h src/libxen.c src/libxen_sym.version: adding new
	  entry points

Thu Nov 10 17:11:03 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/makefile.am src/libxen.c src/xensh.c: add a small tool sensh,
	  implement xenopenconnect and xencloseconnect.

Wed Nov  9 10:57:12 CET 2005 Daniel Veillard <veillard@redhat.com>

	* docs/Goals: added a Goals document for the library

Mon Nov  7 18:14:50 CET 2005 Daniel Veillard <veillard@redhat.com>

	* TODO: updated
	* include/libxen.h src/libxen.c src/libxen_sym.version: extended
	  entry points to a first minimal set.
	* src/internal.h: TODO macro

Wed Nov  2 16:35:54 CET 2005 Daniel Veillard <veillard@redhat.com>

	* TODO libxen.pc.in libxen.spec.in include/Makefile.am Makefile.am
	  config.h.in configure.in: fix make dist, add rpm packaging
	* src/libxen_sym.version src/Makefile.am: set a policy of no
	  export by default of library symbols

Wed Nov  2 14:17:50 CET 2005 Daniel Veillard <veillard@redhat.com>

	* AUTHORS NEWS README autogen.sh configure.in: allow autogen.sh and
	  configure to start working
	* src/Makefile.am src/internal.h src/libxen.c: make the first compile

Wed Nov  2 13:44:47 CET 2005 Daniel Veillard <veillard@redhat.com>

	* src/libxen.c src/Makefile.am include/libxen.h configure.in
	  Makefile.am COPYING.LIB: creation