提交 93f56be1 编写于 作者: T Teemu Paasikivi 提交者: John W. Linville

wl1271: Changed SDIO MMC host claiming

Changed driver to keep MMC host claimed while wlan interface is up.
This keeps MMC stack from powering the SDIO device down.
Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 becd551c
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -107,7 +107,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
int ret;
struct sdio_func *func = wl_to_func(wl);
sdio_claim_host(func);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
wl1271_debug(DEBUG_SPI, "sdio read 52 addr 0x%x, byte 0x%02x",
......@@ -126,7 +125,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
if (ret)
wl1271_error("sdio read failed (%d)", ret);
sdio_release_host(func);
}
static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
......@@ -135,7 +133,6 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
int ret;
struct sdio_func *func = wl_to_func(wl);
sdio_claim_host(func);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
wl1271_debug(DEBUG_SPI, "sdio write 52 addr 0x%x, byte 0x%02x",
......@@ -153,11 +150,19 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
if (ret)
wl1271_error("sdio write failed (%d)", ret);
sdio_release_host(func);
}
static void wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{
struct sdio_func *func = wl_to_func(wl);
if (enable) {
sdio_claim_host(func);
sdio_enable_func(func);
} else {
sdio_disable_func(func);
sdio_release_host(func);
}
}
static struct wl1271_if_operations sdio_ops = {
......@@ -219,22 +224,12 @@ static int __devinit wl1271_probe(struct sdio_func *func,
if (ret)
goto out_irq;
sdio_claim_host(func);
sdio_set_drvdata(func, wl);
ret = sdio_enable_func(func);
if (ret)
goto out_release;
sdio_release_host(func);
wl1271_notice("initialized");
return 0;
out_release:
sdio_release_host(func);
out_irq:
free_irq(wl->irq, wl);
......@@ -251,10 +246,6 @@ static void __devexit wl1271_remove(struct sdio_func *func)
ieee80211_unregister_hw(wl->hw);
sdio_claim_host(func);
sdio_disable_func(func);
sdio_release_host(func);
free_irq(wl->irq, wl);
kfree(wl->target_mem_map);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部