commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream.

Ensure we do not access the buffer beyond the end if no 0xff byte
is encountered.

Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com
Signed-off-by: NSean Young <sean@mess.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a355ec25729053bb9a1a89b6c1d1cdd6c3b3fb1 upstream.

While the CSV3 field of the ID_AA64_PFR0 CPU ID register can be checked
to see if a CPU is susceptible to Meltdown and therefore requires kpti
to be enabled, existing CPUs do not implement this field.

We therefore whitelist all unaffected Cortex-A CPUs that do not implement
the CSV3 field.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bbdc6076d2e5d07db44e74c11b01a3e27ab90b32 upstream.

Commmit eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE"),
made changes in the rare case when the ELF loader was directly invoked
(e.g to set a non-inheritable LD_LIBRARY_PATH, testing new versions of
the loader), by moving into the mmap region to avoid both ET_EXEC and
PIE binaries.  This had the effect of also moving the brk region into
mmap, which could lead to the stack and brk being arbitrarily close to
each other.  An unlucky process wouldn't get its requested stack size
and stack allocations could end up scribbling on the heap.

This is illustrated here.  In the case of using the loader directly, brk
(so helpfully identified as "[heap]") is allocated with the _loader_ not
the binary.  For example, with ASLR entirely disabled, you can see this
more clearly:

$ /bin/cat /proc/self/maps
555555554000-55555555c000 r-xp 00000000 ... /bin/cat
55555575b000-55555575c000 r--p 00007000 ... /bin/cat
55555575c000-55555575d000 rw-p 00008000 ... /bin/cat
55555575d000-55555577e000 rw-p 00000000 ... [heap]
...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 ...
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]

$ /lib/x86_64-linux-gnu/ld-2.27.so /bin/cat /proc/self/maps
...
7ffff7bcc000-7ffff7bd4000 r-xp 00000000 ... /bin/cat
7ffff7bd4000-7ffff7dd3000 ---p 00008000 ... /bin/cat
7ffff7dd3000-7ffff7dd4000 r--p 00007000 ... /bin/cat
7ffff7dd4000-7ffff7dd5000 rw-p 00008000 ... /bin/cat
7ffff7dd5000-7ffff7dfc000 r-xp 00000000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7fb2000-7ffff7fd6000 rw-p 00000000 ...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff8020000 rw-p 00000000 ... [heap]
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]

The solution is to move brk out of mmap and into ELF_ET_DYN_BASE since
nothing is there in the direct loader case (and ET_EXEC is still far
away at 0x400000).  Anything that ran before should still work (i.e.
the ultimately-launched binary already had the brk very far from its
text, so this should be no different from a COMPAT_BRK standpoint).  The
only risk I see here is that if someone started to suddenly depend on
the entire memory space lower than the mmap region being available when
launching binaries via a direct loader execs which seems highly
unlikely, I'd hope: this would mean a binary would _not_ work when
exec()ed normally.

(Note that this is only done under CONFIG_ARCH_HAS_ELF_RANDOMIZATION
when randomization is turned on.)

Link: http://lkml.kernel.org/r/20190422225727.GA21011@beast
Link: https://lkml.kernel.org/r/CAGXu5jJ5sj3emOT2QPxQkNQk0qbU6zEfu9=Omfhx_p0nCKPSjA@mail.gmail.com
Fixes: eab09532 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NAli Saidi <alisaidi@amazon.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 52f6f9d74f31078964ca1574f7bb612da7877ac8 upstream.

As sparse points out, these two copy_from_user() should actually be
copy_to_user().

Fixes: 229b53c9 ("take floppy compat ioctls to sodding floppy.c")
Cc: stable@vger.kernel.org
Acked-by: NAlexander Popov <alex.popov@linux.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0be0bfd2de9dfdd2098a9c5b14bdd8f739c9165d upstream.

Once upon a time, commit 2cac0c00 ("ovl: get exclusive ownership on
upper/work dirs") in v4.13 added some sanity checks on overlayfs layers.
This change caused a docker regression. The root cause was mount leaks
by docker, which as far as I know, still exist.

To mitigate the regression, commit 85fdee1e ("ovl: fix regression
caused by exclusive upper/work dir protection") in v4.14 turned the
mount errors into warnings for the default index=off configuration.

Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in
v5.2, re-introduced exclusive upper/work dir checks regardless of
index=off configuration.

This changes the status quo and mount leak related bug reports have
started to re-surface. Restore the status quo to fix the regressions.
To clarify, index=off does NOT relax overlapping layers check for this
ovelayfs mount. index=off only relaxes exclusive upper/work dir checks
with another overlayfs mount.

To cover the part of overlapping layers detection that used the
exclusive upper/work dir checks to detect overlap with self upper/work
dir, add a trap also on the work base dir.

Link: https://github.com/moby/moby/issues/34672
Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/
Link: https://github.com/containers/libpod/issues/3540
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Tested-by: NColin Walters <walters@verbum.org>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6870b673509779195cab300aedc844b352d9cfbc upstream.

The PCI kirin driver compilation produces the following section mismatch
warning:

WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from
the function kirin_pcie_probe() to the function
.init.text:kirin_add_pcie_port()
The function kirin_pcie_probe() references
the function __init kirin_add_pcie_port().
This is often because kirin_pcie_probe lacks a __init
annotation or the annotation of kirin_add_pcie_port is wrong.

Remove '__init' from kirin_add_pcie_port() to fix it.

Fixes: fc5165db ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver")
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 754265bcab78a9014f0f99cd35e0d610fcd7dfa7 ]

After the conversion to lock-less dma-api call the
increase_address_space() function can be called without any
locking. Multiple CPUs could potentially race for increasing
the address space, leading to invalid domain->mode settings
and invalid page-tables. This has been happening in the wild
under high IO load and memory pressure.

Fix the race by locking this operation. The function is
called infrequently so that this does not introduce
a performance regression in the dma-api path again.
Reported-by: NQian Cai <cai@lca.pw>
Fixes: 256e4621 ('iommu/amd: Make use of the generic IOVA allocator')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 36b7200f67dfe75b416b5281ed4ace9927b513bc ]

When devices are attached to the amd_iommu in a kdump kernel, the old device
table entries (DTEs), which were copied from the crashed kernel, will be
overwritten with a new domain number.  When the new DTE is written, the IOMMU
is told to flush the DTE from its internal cache--but it is not told to flush
the translation cache entries for the old domain number.

Without this patch, AMD systems using the tg3 network driver fail when kdump
tries to save the vmcore to a network system, showing network timeouts and
(sometimes) IOMMU errors in the kernel log.

This patch will flush IOMMU translation cache entries for the old domain when
a DTE gets overwritten with a new domain number.
Signed-off-by: NStuart Hayes <stuart.w.hayes@gmail.com>
Fixes: 3ac3e5ee ('iommu/amd: Copy old trans table from old kernel')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d41a3effbb53b1bcea41e328d16a4d046a508381 ]

If a request_key authentication token key gets revoked, there's a window in
which request_key_auth_describe() can see it with a NULL payload - but it
makes no check for this and something like the following oops may occur:

	BUG: Kernel NULL pointer dereference at 0x00000038
	Faulting instruction address: 0xc0000000004ddf30
	Oops: Kernel access of bad area, sig: 11 [#1]
	...
	NIP [...] request_key_auth_describe+0x90/0xd0
	LR [...] request_key_auth_describe+0x54/0xd0
	Call Trace:
	[...] request_key_auth_describe+0x54/0xd0 (unreliable)
	[...] proc_keys_show+0x308/0x4c0
	[...] seq_read+0x3d0/0x540
	[...] proc_reg_read+0x90/0x110
	[...] __vfs_read+0x3c/0x70
	[...] vfs_read+0xb4/0x1b0
	[...] ksys_read+0x7c/0x130
	[...] system_call+0x5c/0x70

Fix this by checking for a NULL pointer when describing such a key.

Also make the read routine check for a NULL pointer to be on the safe side.

[DH: Modified to not take already-held rcu lock and modified to also check
 in the read routine]

Fixes: 04c567d9 ("[PATCH] Keys: Fix race between two instantiators of a key")
Reported-by: NSachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NSachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4030b4c585c41eeefec7bd20ce3d0e100a0f2e4d ]

When the 'start' parameter is >=  0xFF000000 on 32-bit
systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems,
fill_gva_list() gets into an infinite loop.

With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT
and always compares as less than end.  Memory is filled with
guest virtual addresses until the system crashes.

Fix this by never incrementing 'cur' to be larger than 'end'.
Reported-by: NJong Hyun Park <park.jonghyun@yonsei.ac.kr>
Signed-off-by: NTianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2ffd9e33 ("x86/hyper-v: Use hypercall for remote TLB flush")
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9b8bd476e78e89c9ea26c3b435ad0201c3d7dbf5 ]

Identical to __put_user(); the __get_user() argument evalution will too
leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region.
While uncommon this was observed to happen for:

  drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i]))

where UBSAN added array bound checking.

This complements commit:

  6ae865615fc4 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation")

Tested-by Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: broonie@kernel.org
Cc: sfr@canb.auug.org.au
Cc: akpm@linux-foundation.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: mhocko@suse.cz
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.netSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 962411b05a6d3342aa649e39cda1704c1fc042c6 ]

If devm_request_irq() fails to disable all interrupts, no cleanup is
performed before retuning the error. To fix this issue, invoke
omap_dma_free() to do the cleanup.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.eduSigned-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c231c0c1dec42192aca0f87f2dc68b8f0cbc7d2 ]

In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then
of_property_read_u32_array() is invoked to search for the property.
However, if this process fails, 'rsv_events' is not deallocated, leading to
a memory leak bug. To fix this issue, free 'rsv_events' before returning
the error.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1565938136-7249-1-git-send-email-wenwen@cs.uga.eduSigned-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e1e54ec7fb55501c33b117c111cb0a045b8eded2 ]

In commit 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.

Fix it now.

Rename the corresponding label to something more in line.

Fixes: 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit be6cef69ba570ebb327eba1ef6438f7af49aaf86 ]

On embedded environments with hard memory limits it is a normal although
rare case when skb can't be allocated on rx part under high traffic.

In such OOM cases napi_complete_done() was not called.
So the napi object became in an invalid state like it is "scheduled".
Kernel do not re-schedules the poll of that napi object.

Consequently, kernel can not remove that object the system hangs on
`ifconfig down` waiting for a poll.

We are fixing this by gracefully closing napi poll routine with correct
invocation of napi_complete_done.

This was reproduced with artificially failing the allocation of skb to
simulate an "out of memory" error case and check that traffic does
not get stuck.

Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eeb71c950bc6eee460f2070643ce137e067b234c ]

turbostat could be terminated by general protection fault on some latest
hardwares which (for example) support 9 levels of C-states and show 18
"tADDED" lines. That bloats the total output and finally causes buffer
overrun.  So let's extend the buffer to avoid this.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 03531482402a2bc4ab93cf6dde46833775e035e9 ]

The -w argument in x86_energy_perf_policy currently triggers an
unconditional segfault.

This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and
yet the argument handler expects an argument.

When parse_optarg_string is called with a null argument, we then proceed to
crash in strncmp, not horribly friendly.

The man page describes -w as taking an argument, the long form
(--hwp-window) is correctly marked as taking a required argument, and the
code expects it.

As such, this patch simply marks the short form (-w) as requiring an
argument.
Signed-off-by: NZephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit adb8049097a9ec4acd09fbd3aa8636199a78df8a ]

x86_energy_perf_policy first uses __get_cpuid() to check the maximum
CPUID level and exits if it is too low.  It then assumes that later
calls will succeed (which I think is architecturally guaranteed).  It
also assumes that CPUID works at all (which is not guaranteed on
x86_32).

If optimisations are enabled, gcc warns about potentially
uninitialized variables.  Fix this by adding an exit-on-error after
every call to __get_cpuid() instead of just checking the maximum
level.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b6b4dc4c1fa7f1c99398e7dc85758049645e9588 ]

In xgbe_mod_init(), we should do cleanup if some error occurs
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: efbaa828 ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164de ("amd-xgbe: Add PCI device support")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0f4cd769c410e2285a4e9873a684d90423f03090 ]

When counting dispatched micro-ops with cnt_ctl=1, in order to prevent
sample bias, IBS hardware preloads the least significant 7 bits of
current count (IbsOpCurCnt) with random values, such that, after the
interrupt is handled and counting resumes, the next sample taken
will be slightly perturbed.

The current count bitfield is in the IBS execution control h/w register,
alongside the maximum count field.

Currently, the IBS driver writes that register with the maximum count,
leaving zeroes to fill the current count field, thereby overwriting
the random bits the hardware preloaded for itself.

Fix the driver to actually retain and carry those random bits from the
read of the IBS control register, through to its write, instead of
overwriting the lower current count bits with zeroes.

Tested with:

perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>

'perf annotate' output before:

 15.70  65:   addsd     %xmm0,%xmm1
 17.30        add       $0x1,%rax
 15.88        cmp       %rdx,%rax
              je        82
 17.32  72:   test      $0x1,%al
              jne       7c
  7.52        movapd    %xmm1,%xmm0
  5.90        jmp       65
  8.23  7c:   sqrtsd    %xmm1,%xmm0
 12.15        jmp       65

'perf annotate' output after:

 16.63  65:   addsd     %xmm0,%xmm1
 16.82        add       $0x1,%rax
 16.81        cmp       %rdx,%rax
              je        82
 16.69  72:   test      $0x1,%al
              jne       7c
  8.30        movapd    %xmm1,%xmm0
  8.13        jmp       65
  8.24  7c:   sqrtsd    %xmm1,%xmm0
  8.39        jmp       65

Tested on Family 15h and 17h machines.

Machines prior to family 10h Rev. C don't have the RDWROPCNT capability,
and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't
affect their operation.

It is unknown why commit db98c5fa ("perf/x86: Implement 64-bit
counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt
field; the number of preloaded random bits has always been 7, AFAICT.
Signed-off-by: NKim Phillips <kim.phillips@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org>
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: "Namhyung Kim" <namhyung@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 44d3bbb6f5e501b873218142fe08cdf62a4ac1f3 ]

We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in
some cases when using perf:

perfevents: irq loop stuck!
WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03
...
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: acme@kernel.org
Cc: Josh Hunt <johunt@akamai.com>
Cc: bpuranda@akamai.com
Cc: mingo@redhat.com
Cc: jolsa@redhat.com
Cc: tglx@linutronix.de
Cc: namhyung@kernel.org
Cc: alexander.shishkin@linux.intel.com
Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c486dcd2f1bbdd524a1e0149734b79e4ae329650 ]

Make sure interrupt handler i2c_dw_irq_handler_slave() has finished
before clearing the the dev->slave pointer in i2c_dw_unreg_slave().

There is possibility for a race if i2c_dw_irq_handler_slave() is running
on another CPU while clearing the dev->slave pointer.
Reported-by: NKrzysztof Adamski <krzysztof.adamski@nokia.com>
Reported-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 189308d5823a089b56e2299cd96589507dac7319 ]

A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models.  Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.
Reported-and-tested-by: NSteveM <swm@swm1.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 36f1031c51a2538e5558fb44c6d6b88f98d3c0f2 ]

Currently, the ibmvnic driver will not schedule device resets
if the device is being removed, but does not check the device
state before the reset is actually processed. This leads to a race
where a reset is scheduled with a valid device state but is
processed after the driver has been removed, resulting in an oops.

Fix this by checking the device state before processing a queued
reset event.
Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5b3efa4f1479c91cb8361acef55f9c6662feba57 ]

pfn_valid can be wrong when parsing a invalid pfn whose phys address
exceeds BITS_PER_LONG as the MSB will be trimed when shifted.

The issue originally arise from bellowing call stack, which corresponding to
an access of the /proc/kpageflags from userspace with a invalid pfn parameter
and leads to kernel panic.

[46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>]
[46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>]
[46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>]
[46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>]
[46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>]
[46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>]
(ret_fast_syscall+0x0/0x28)
Signed-off-by: NZhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 993cc8753453fccfe060a535bbe21fcf1001b626 ]

The Falcon microcontroller that runs the XUSB firmware and which is
responsible for exposing the XHCI interface can address only 40 bits of
memory. Typically that's not a problem because Tegra devices don't have
enough system memory to exceed those 40 bits.

However, if the ARM SMMU is enable on Tegra186 and later, the addresses
passed to the XUSB controller can be anywhere in the 48-bit IOV address
space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from
the top of the IOVA space, the Falcon microcontroller is not able to
load the firmware successfully.

Fix this by setting the DMA mask to 40 bits, which will force the DMA
API to map the buffer for the firmware to an IOVA that is addressable by
the Falcon.
Signed-off-by: NNagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 478228e57f81f6cb60798d54fc02a74ea7dd267e ]

It's safer to zero out the password so that it can never be disclosed.

Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f2aee329a68f5a907bcff11a109dfe17c0b41aeb ]

RHBZ: 1710429

When we use a domain-key to authenticate using multiuser we must also set
the domainnmame for the new volume as it will be used and passed to the server
in the NTLMSSP Domain-name.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2a1a3fa0f29270583f0e6e3100d609e09697add1 ]

An arm64 kernel configured with

  CONFIG_KPROBES=y
  CONFIG_KALLSYMS=y
  # CONFIG_KALLSYMS_ALL is not set
  CONFIG_KALLSYMS_BASE_RELATIVE=y

reports the following kprobe failure:

  [    0.032677] kprobes: failed to populate blacklist: -22
  [    0.033376] Please take care of using kprobes.

It appears that kprobe fails to retrieve the symbol at address
0xffff000010081000, despite this symbol being in System.map:

  ffff000010081000 T __exception_text_start

This symbol is part of the first group of aliases in the
kallsyms_offsets array (symbol names generated using ugly hacks in
scripts/kallsyms.c):

  kallsyms_offsets:
          .long   0x1000 // do_undefinstr
          .long   0x1000 // efi_header_end
          .long   0x1000 // _stext
          .long   0x1000 // __exception_text_start
          .long   0x12b0 // do_cp15instr

Looking at the implementation of get_symbol_pos(), it returns the
lowest index for aliasing symbols. In this case, it return 0.

But kallsyms_lookup_size_offset() considers 0 as a failure, which
is obviously wrong (there is definitely a valid symbol living there).
In turn, the kprobe blacklisting stops abruptly, hence the original
error.

A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always
some random symbols at the beginning of this array, which are never
looked up via kallsyms_lookup_size_offset.

Fix it by considering that get_symbol_pos() is always successful
(which is consistent with the other uses of this function).

Fixes: ffc50891 ("[PATCH] Create kallsyms_lookup_size_offset()")
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d33d4beb522987d1c305c12500796f9be3687dee ]

Ensure we update the write result count on success, since the
RPC call itself does not do so.
Reported-by: NJan Stancek <jstancek@redhat.com>
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 71affe9be45a5c60b9772e1b2701710712637274 ]

If we received a reply from the server with a zero length read and
no error, then that implies we are at eof.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3a069024d371125227de3ac8fa74223fcf473520 ]

The find_pattern() debug output was printing the 'skip' character.
This can be a NULL-byte and messes up further pr_debug() output.

Output without the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8
kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8

Output with the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter!
kernel: nf_conntrack_ftp: Match succeeded!
kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645)
kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8
Signed-off-by: NThomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3cf2f450fff304be9cf4868bf0df17f253bc5b1c ]

Simplify the check in physdev_mt_check() to emit an error message
only when passed an invalid chain (ie, NF_INET_LOCAL_OUT).
This avoids cluttering up the log with errors against valid rules.

For large/heavily modified rulesets, current behavior can quickly
overwhelm the ring buffer, because this function gets called on
every change, regardless of the rule that was changed.
Signed-off-by: NTodd Seidelmann <tseidelmann@linode.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3e5bedc2c258341702ddffbd7688c5e6eb01eafa ]

Rahul Tanwar reported the following bug on DT systems:

> 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is
> updated to the end of hardware IRQ numbers but this is done only when IOAPIC
> configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is
> a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration
> comes from devicetree.
>
> See dtb_add_ioapic() in arch/x86/kernel/devicetree.c
>
> In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base'
> remains to zero initialized value. This means that for OF based systems,
> virtual IRQ base will get set to zero.

Such systems will very likely not even boot.

For DT enabled machines ioapic_dynirq_base is irrelevant and not
updated, so simply map the IRQ base 1:1 instead.
Reported-by: NRahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: NRahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: NAndy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alan@linux.intel.com
Cc: bp@alien8.de
Cc: cheol.yong.kim@intel.com
Cc: qi-ming.wu@intel.com
Cc: rahul.tanwar@intel.com
Cc: rppt@linux.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f53a7ad189594a112167efaf17ea8d0242b5ac00 ]

get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.

This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
  ocp_read_dword() ignores the return value of generic_ocp_read(), which
  calls get_registers().

So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.

This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).
Signed-off-by: NPrashant Malani <pmalani@chromium.org>
Acked-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c238177bd7f4b14bdf7447cc1cd9bb791f147e6 ]

test_select_reuseport fails on s390 due to verifier rejecting
test_select_reuseport_kern.o with the following message:

	; data_check.eth_protocol = reuse_md->eth_protocol;
	18: (69) r1 = *(u16 *)(r6 +22)
	invalid bpf_context access off=22 size=2

This is because on big-endian machines casts from __u32 to __u16 are
generated by referencing the respective variable as __u16 with an offset
of 2 (as opposed to 0 on little-endian machines).

The verifier already has all the infrastructure in place to allow such
accesses, it's just that they are not explicitly enabled for
eth_protocol field. Enable them for eth_protocol field by using
bpf_ctx_range instead of offsetof.

Ditto for ip_protocol, bind_inany and len, since they already allow
narrowing, and the same problem can arise when working with them.

Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0ff0f15a32c093381ad1abc06abe85afb561ab28 ]

Multiple batadv_ogm2_packet can be stored in an skbuff. The functions
batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there
is another additional batadv_ogm2_packet in the skb or not before they
continue processing the packet.

The length for such an OGM2 is BATADV_OGM2_HLEN +
batadv_ogm2_packet->tvlv_len. The check must first check that at least
BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.

Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c51bc12d06b3a5494fbfcbd788a8e307932a06e9 ]

A timing hazard exists when an early fork/exec thread begins
exiting and sets its mm pointer to NULL while a separate core
tries to update the section information.

This commit ensures that the mm pointer is not NULL before
setting its section parameters. The arguments provided by
commit 11ce4b33 ("ARM: 8672/1: mm: remove tasklist locking
from update_sections_early()") are equally valid for not
requiring grabbing the task_lock around this check.

Fixes: 08925c2f ("ARM: 8464/1: Update all mm structures with section adjustments")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NLaura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit de0e4fd2f07ce3bbdb69dfb8d9426b7227451b69 ]

If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to
memory leaks. To fix this issue, introduce the label 'err4' to perform the
cleanup work before returning the error.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Acked-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>