[ Upstream commit c260121a97a3e4df6536edbc2f26e166eff370ce ]

Now that nfs_match_client drops the nfs_client_lock, we should be
careful
to always return it in the same condition: locked.

Fixes: 950a578c6128 ("NFS: make nfs_match_client killable")
Reported-by: syzbot+228a82b263b5da91883d@syzkaller.appspotmail.com
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ]

The Allwinner BSP makes sure that we don't end up with a null start delay
or with a delay larger than vtotal.

The former condition is likely to happen now with the reworked start delay,
so make sure we enforce the same boundaries.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d1ffa760d22aa1d8190478e5ef555c59a771db27 ]

The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
	- wait for any interrupts
	- flush all I/O in the workqueue
	- retry cio_cancel_halt_clear

During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.

Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: NEric Farman <farman@linux.ibm.com>
Signed-off-by: NFarhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com>
Reviewed-by: NEric Farman <farman@linux.ibm.com>
Acked-by: NHalil Pasic <pasic@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ]

The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.

That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.

This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ]

After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.

Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.ukSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ]

This makes it safe to access drm_device->dev after the parent device has
been removed/unplugged.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ]

Noted in review by Dave Emett for V3D 4.2 support.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.netReviewed-by: NDave Emett <david.emett@broadcom.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8ca5104715cfd14254ea5aecc390ae583b707607 ]

Building with clang shows a variable that is only used by the
suspend/resume functions but defined outside of their #ifdef block:

sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted

We commonly fix these by marking the PM functions as __maybe_unused,
but here that would grow the davinci_mcasp structure, so instead
add another #ifdef here.

Fixes: 1cc0c054 ("ASoC: davinci-mcasp: Convert the context save/restore to use array")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5442dcaa0d90fc376bdfc179a018931a8f43dea4 ]

This fixes a bug for messages containing both zero length and
unidirectional xfers.

The function spi_map_msg will allocate dummy tx and/or rx buffers
for use with unidirectional transfers when the hardware can only do
a bidirectional transfer.  That dummy buffer will be used in place
of a NULL buffer even when the xfer length is 0.

Then in the function __spi_map_msg, if he hardware can dma,
the zero length xfer will have spi_map_buf called on the dummy
buffer.

Eventually, __sg_alloc_table is called and returns -EINVAL
because nents == 0.

This fix prevents the error by not using the dummy buffer when
the xfer length is zero.
Signed-off-by: NChris Lesiak <chris.lesiak@licor.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c842749ea1d32513f9e603c074d60d7aa07cb2ef ]

Commit 71abd290 ("spi: imx: Add support for SPI Slave mode") added
an RX FIFO flush before start of a transfer.  In slave mode, the master
may have sent more data than expected and this data will still be in the
RX FIFO at the start of the next transfer, and so needs to be flushed.

However, the code to do the flush was accidentally saving this data into
the previous transfer's RX buffer, clobbering the contents of whatever
followed that buffer.

Change it to empty the FIFO and throw away the data.  Every one of the
RX functions for the different eCSPI versions and modes reads the RX
FIFO data using the same readl() call, so just use that, rather than
using the spi_imx->rx function pointer and making sure all the different
rx functions have a working "throw away" mode.

There is another issue, which affects master mode when switching from
DMA to PIO.  There can be extra data in the RX FIFO which triggers this
flush code, causing memory corruption in the same manner.  I don't know
why this data is unexpectedly in the FIFO.  It's likely there is a
different bug or erratum responsible for that.  But regardless of that,
I think this is proper fix the for bug at hand here.

Fixes: 71abd290 ("spi: imx: Add support for SPI Slave mode")
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: NTrent Piepho <tpiepho@impinj.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 26843bb128590edd7eba1ad7ce22e4b9f1066ce3 ]

While the sequencer is reset after each SPI message since commit
880c6d11 ("spi: rspi: Add support for Quad and Dual SPI
Transfers on QSPI"), it was never reset for the first message, thus
relying on reset state or bootloader settings.

Fix this by initializing it explicitly during configuration.

Fixes: 0b2182dd ("spi: add support for Renesas RSPI")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ]

Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.

The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.

We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.

However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.

So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().

We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().
Suggested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f37d8e67f39e6d3eaf4cc5471e8a3d21209843c6 ]

pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further,
these buffers are used without a check. The patch checks for these
failures and sends the error upstream.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ]

During debug, it was seen that the driver is issuing commands specific to
SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
this should not be done.

Revise the code to stop sending these commands on a SLI4 adapter.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 03aa4f191a36f33fce015387f84efa0eee94408e ]

Two saa7146/hexium files contain a construct that causes a warning
when built with clang:

drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe'
      [-Werror,-Wframe-larger-than=]
static int hexium_probe(struct saa7146_dev *dev)
           ^
drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach'
      [-Werror,-Wframe-larger-than=]
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
           ^

This one happens regardless of KASAN, and the problem is that a
constructor to initialize a dynamically allocated structure leads
to a copy of that structure on the stack, whereas gcc initializes
it in place.

Link: https://bugs.llvm.org/show_bug.cgi?id=40776Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warnings]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 32a80c093b524a0682f1c6166c910387b116ffce ]

The driver is reporting support for NVME even when not configured for NVME
operation.

Fix (and make more readable) when NVME protocol support is indicated.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d67f935b79a76ac9d86dde1a27bdd413feb5d987 ]

The FDMI manufacturer value being reported on Linux is inconsistent with
other OS's.

Set the value to "Emulex Corporation" for consistency.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f74267b51cb36321f777807b2e04ca02167ecc08 ]

The media_device is part of a static global vimc_device struct.
The media framework expects this to be zeroed before it is
used, however, since this is a global this is not the case if
vimc is unbound and then bound again.

So call memset to ensure any left-over values are cleared.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ed713a4a1367aca5c0f2f329579465db00c17995 ]

clang-8 warns about one function here when KASAN is enabled, even
without the 'asan-stack' option:

drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function

I have reported this issue in the llvm bugzilla, but to make
it work with the clang-8 release, a small annotation is still
needed.

Link: https://bugs.llvm.org/show_bug.cgi?id=38809Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warning]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e6f8bd59c28f758feea403a70d6c3ef28c50959f ]

When streaming is stopped all URBs are killed, but in fill_frame and in
bulk_irq this results in an attempt to resubmit the killed URB. That is
not what you want and causes spurious kernel messages.

So check if streaming has stopped before resubmitting.

Also check against gspca_dev->streaming rather than vb2_start_streaming_called()
since vb2_start_streaming_called() will return true when in stop_streaming,
but gspca_dev->streaming is set to false when stop_streaming is called.

Fixes: 6992effe ("gspca: Kill all URBs before releasing any of them")
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2978a505aaa981b279ef359f74ba93d25098e0a0 ]

The state TASK_UNINTERRUPTIBLE should be set just before
schedule_timeout() call, so it knows the sleep mode it should enter.
There is no point in setting TASK_UNINTERRUPTIBLE at the initialization
of the thread as schedule_timeout() will set the state back to
TASK_RUNNING.

This fixes a warning in __might_sleep() call, as it's expecting the
task to be in TASK_RUNNING state just before changing the state to
a sleeping state.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 63a06181d7ce169d09843645c50fea1901bc9f0a ]

devm_reset_control_get could fail, so the fix checks its return value and
passes the error code upstream in case it fails.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Acked-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ]

[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.

When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.

This incorrect programming sequence causes CRC mismatches to occur in
the test.

The stream->mode_changed value should be set whenever a new stream
is created.

[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.

So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ]

Check if we get any values equal to 0, and set to 1 if so.
Signed-off-by: NMurton Liu <murton.liu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NSivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49dc762cffd8305a861ca649e82dc5533b3e3344 ]

The driver should really call dm365_isif_setup_pinmux() through a callback,
but uses a hack to include a davinci specific machine header file when
compile testing instead. This works almost everywhere, but not on the
ARM omap1 platform, which has another header named mach/mux.h. This
causes a build failure:

drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration]
        davinci_cfg_reg(DM365_VIN_CAM_WEN);
        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN'
        davinci_cfg_reg(DM365_VIN_CAM_WEN);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD'
        davinci_cfg_reg(DM365_VIN_CAM_VD);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD'
        davinci_cfg_reg(DM365_VIN_CAM_HD);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN'
        davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
                        ^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN'
        davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
                        ^
7 errors generated.

Exclude omap1 from compile-testing, under the assumption that all others
still work.

Fixes: 4907c73d ("media: staging: davinci_vpfe: allow building with COMPILE_TEST")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 981fbe3da20a6f35f17977453bce7dfc1664d74f ]

Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323

Users are experiencing problems with the DVBSky S960/S960C USB devices
since the following commit:

9d659ae1: ("locking/mutex: Add lock handoff to avoid starvation")

The device malfunctions after running for an indeterminable period of
time, and the problem can only be cleared by rebooting the machine.

It is possible to encourage the problem to surface by blocking the
signal to the LNB.

Further debugging revealed the cause of the problem.

In the following capture:
- thread #1325 is running m88ds3103_set_frontend
- thread #42 is running ts2020_stat_work

a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80
   [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00
   [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
   [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66
   [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
   [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
   [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
   [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b
   [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07

Two i2c messages are sent to perform a reset in m88ds3103_set_frontend:

  a. 0x07, 0x80
  b. 0x07, 0x00

However, as shown in the capture, the regmap mutex is being handed over
to another thread (ts2020_stat_work) in between these two messages.

>From here, the device responds to every i2c message with an 07 message,
and will only return to normal operation following a power cycle.

Use regmap_multi_reg_write to group the two reset messages, ensuring
both are processed before the regmap mutex is unlocked.
Signed-off-by: NJames Hutchinson <jahutchinson99@googlemail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fdfa59cd63b184e1e96d51ff170fcac739bc6f6f ]

Commit 14f4eaed ("media: dvbsky: fix driver unregister logic") fixed
a use-after-free by removing the reference to the frontend after deleting
the backing i2c device.

This has the unfortunate side effect the frontend device is never freed
in the dvb core leaving a dangling device, leading to errors when the
dvb core tries to register the frontend after e.g. a replug as reported
here: https://www.spinics.net/lists/linux-media/msg138181.html

media: dvbsky: issues with DVBSky T680CI

===
[  561.119145] sp2 8-0040: CIMaX SP2 successfully attached
[  561.119161] usb 2-3: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[  561.119174] sysfs: cannot create duplicate filename '/class/dvb/
dvb0.frontend0'
===

The use after free happened as dvb_usbv2_disconnect calls in this order:
- dvb_usb_device::props->exit(...)
- dvb_usbv2_adapter_frontend_exit(...)
  + if (fe) dvb_unregister_frontend(fe)
  + dvb_usb_device::props->frontend_detach(...)

Moving the release of the i2c device from exit() to frontend_detach()
avoids the dangling pointer access and allows the core to unregister
the frontend.

This was originally reported for a DVBSky T680CI, but it also affects
the MyGica T230C. As all supported devices structure the registration/
unregistration identically, apply the change for all device types.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0ab34a08812a3334350dbaf69a018ee0ab3d2ddd ]

si2165_readreg8() may fail. Looking into si2165_readreg8(), we will find
that "val_tmp" will be an uninitialized value when regmap_read() fails.
"val_tmp" is then assigned to "val". So if si2165_readreg8() fails,
"val" will be a random value. Further use will lead to undefined
behaviors. The fix checks if si2165_readreg8() fails, and if so, returns
its error code upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Reviewed-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5b6e13216be29ced7350d9c354a1af8fe0ad9a3e ]

igb sets different WoL settings in system suspend callback and runtime
suspend callback.

The suspend direct complete optimization leaves igb in runtime suspended
state with wrong WoL setting during system suspend.

To fix this, we need to disable suspend direct complete optimization to
let igb always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ]

Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
some SPI controllers use DMA for all transfers.

Example splat with CONFIG_DMA_API_DEBUG enabled:

[   23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d]
[   23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190
[   23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
[   23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
[   23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   23.750620] RIP: 0010:check_for_stack+0xb7/0x190
[   23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
[   23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286
[   23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006
[   23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450
[   23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0
[   23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c
[   23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001
[   23.750679] FS:  0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690
[   23.750686] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[   23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0
[   23.750696] Call Trace:
[   23.750713]  debug_dma_map_sg+0x100/0x340
[   23.750727]  ? dma_direct_map_sg+0x3b/0xb0
[   23.750739]  spi_map_buf+0x25a/0x300
[   23.750751]  __spi_pump_messages+0x2a4/0x680
[   23.750762]  __spi_sync+0x1dd/0x1f0
[   23.750773]  spi_sync+0x26/0x40
[   23.750790]  mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
[   23.750802]  ? spi_finalize_current_transfer+0x10/0x10
[   23.750821]  mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]
Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 459d69c407f9ba122f12216555c3012284dc9fd7 ]

There are some new e1000e devices can only be woken up from D3 one time,
by plugging Ethernet cable. Subsequent cable plugging does set PME bit
correctly, but it still doesn't get woken up.

Since e1000e connects to the root complex directly, we rely on ACPI to
wake it up. In this case, the GPE from _PRW only works once and stops
working after that. Though it appears to be a platform bug, e1000e
maintainers confirmed that I219 does not support D3.

So disable runtime PM on CNP+ chips. We may need to disable earlier
generations if this bug also hit older platforms.

Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 106204b56f60abf1bead7dceb88f2be3e34433da ]

In case kzalloc fails, the fix releases resources and returns
-ENOMEM to avoid the NULL pointer dereference.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ]

Releasing planes should not release the 2nd odm pipe right away,
this change leaves us with 2 pipes with null planes and same stream
when planes are released during odm.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2cc12751cf464a722ff57b54d17d30c84553f9c0 ]

Memory allocated via kmemdup might fail and return a NULL pointer.
This patch adds a check on the return value of kmemdup and passes the
error upstream.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9aabb68568b473bf2f0b179d053b403961e42e4d ]

In enumerate_services, ida_simple_get on failure can return an error and
leaks memory. The patch ensures that the dev_set_name is set on non
failure cases, and releases memory during failure.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 62f95ae805fa9e1e84d47d3219adddd97b2654b7 ]

Newer combinations of the glibc, kernel and openssh can result in long initial
startup times on OMAP devices:

[    6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ...
[  142.652491] systemd-rc-once[102]: Creating ED25519 key; done.

due to the blocking getrandom(2) system call:

[  142.610335] random: crng init done

Set the quality level for the omap hwrng driver allowing the kernel to use the
hwrng as an entropy source at boot.
Signed-off-by: NRouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f6ed6491d565c336a360471e0c29228e34f4380e ]

adma driver is using pm_clk_*() interface for managing clock resources.
With this it is observed that clocks remain ON always. This happens on
Tegra devices which use BPMP co-processor to manage clock resources,
where clocks are enabled during prepare phase. This is necessary because
clocks to BPMP are always blocking. When pm_clk_*() interface is used on
such Tegra devices, clock prepare count is not balanced till remove call
happens for the driver and hence clocks are seen ON always. Thus this
patch replaces pm_clk_*() with devm_clk_*() framework.
Suggested-by: NMohan Kumar D <mkumard@nvidia.com>
Reviewed-by: NJonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: NSameer Pujar <spujar@nvidia.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 099e6cc1582dc2903fecb898bbeae8f7cf4262c7 ]

Currently incoming ARP Replies, for example via a DHT-PUT message, do
not update the timeout for an already existing DAT entry. These ARP
Replies are dropped instead.

This however defeats the purpose of the DHCPACK snooping, for instance.
Right now, a DAT entry in the DHT will be purged every five minutes,
likely leading to a mesh-wide ARP Request broadcast after this timeout.
Which then recreates the entry. The idea of the DHCPACK snooping is to
be able to update an entry before a timeout happens, to avoid ARP Request
flooding.

This patch fixes this issue by updating a DAT entry on incoming
ARP Replies even if a matching DAT entry already exists. While still
filtering the ARP Reply towards the soft-interface, to avoid duplicate
messages on the client device side.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Acked-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 98bbbb76f2edcfb8fb2b8f4b3ccc7b6e99d64bd8 ]

clang correctly points out a code path that would lead
to an uninitialized variable use:

security/selinux/netlabel.c:310:6: error: variable 'addr' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
        if (ip_hdr(skb)->version == 4) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:322:40: note: uninitialized use occurs here
        rc = netlbl_conn_setattr(ep->base.sk, addr, &secattr);
                                              ^~~~
security/selinux/netlabel.c:310:2: note: remove the 'if' if its condition is always true
        if (ip_hdr(skb)->version == 4) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:291:23: note: initialize the variable 'addr' to silence this warning
        struct sockaddr *addr;
                             ^
                              = NULL

This is probably harmless since we should not see ipv6 packets
of CONFIG_IPV6 is disabled, but it's better to rearrange the code
so this cannot happen.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[PM: removed old patchwork link, fixed checkpatch.pl style errors]
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>