提交 93f56be1 编写于 作者: T Teemu Paasikivi 提交者: John W. Linville

wl1271: Changed SDIO MMC host claiming

Changed driver to keep MMC host claimed while wlan interface is up.
This keeps MMC stack from powering the SDIO device down.
Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 becd551c
...@@ -107,7 +107,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, ...@@ -107,7 +107,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
int ret; int ret;
struct sdio_func *func = wl_to_func(wl); struct sdio_func *func = wl_to_func(wl);
sdio_claim_host(func);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
wl1271_debug(DEBUG_SPI, "sdio read 52 addr 0x%x, byte 0x%02x", wl1271_debug(DEBUG_SPI, "sdio read 52 addr 0x%x, byte 0x%02x",
...@@ -126,7 +125,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, ...@@ -126,7 +125,6 @@ static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
if (ret) if (ret)
wl1271_error("sdio read failed (%d)", ret); wl1271_error("sdio read failed (%d)", ret);
sdio_release_host(func);
} }
static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
...@@ -135,7 +133,6 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, ...@@ -135,7 +133,6 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
int ret; int ret;
struct sdio_func *func = wl_to_func(wl); struct sdio_func *func = wl_to_func(wl);
sdio_claim_host(func);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
wl1271_debug(DEBUG_SPI, "sdio write 52 addr 0x%x, byte 0x%02x", wl1271_debug(DEBUG_SPI, "sdio write 52 addr 0x%x, byte 0x%02x",
...@@ -153,11 +150,19 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, ...@@ -153,11 +150,19 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
if (ret) if (ret)
wl1271_error("sdio write failed (%d)", ret); wl1271_error("sdio write failed (%d)", ret);
sdio_release_host(func);
} }
static void wl1271_sdio_set_power(struct wl1271 *wl, bool enable) static void wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{ {
struct sdio_func *func = wl_to_func(wl);
if (enable) {
sdio_claim_host(func);
sdio_enable_func(func);
} else {
sdio_disable_func(func);
sdio_release_host(func);
}
} }
static struct wl1271_if_operations sdio_ops = { static struct wl1271_if_operations sdio_ops = {
...@@ -219,22 +224,12 @@ static int __devinit wl1271_probe(struct sdio_func *func, ...@@ -219,22 +224,12 @@ static int __devinit wl1271_probe(struct sdio_func *func,
if (ret) if (ret)
goto out_irq; goto out_irq;
sdio_claim_host(func);
sdio_set_drvdata(func, wl); sdio_set_drvdata(func, wl);
ret = sdio_enable_func(func);
if (ret)
goto out_release;
sdio_release_host(func);
wl1271_notice("initialized"); wl1271_notice("initialized");
return 0; return 0;
out_release:
sdio_release_host(func);
out_irq: out_irq:
free_irq(wl->irq, wl); free_irq(wl->irq, wl);
...@@ -251,10 +246,6 @@ static void __devexit wl1271_remove(struct sdio_func *func) ...@@ -251,10 +246,6 @@ static void __devexit wl1271_remove(struct sdio_func *func)
ieee80211_unregister_hw(wl->hw); ieee80211_unregister_hw(wl->hw);
sdio_claim_host(func);
sdio_disable_func(func);
sdio_release_host(func);
free_irq(wl->irq, wl); free_irq(wl->irq, wl);
kfree(wl->target_mem_map); kfree(wl->target_mem_map);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册