Kconfig 26.6 KB
Newer Older
1
#
2
# GPIO infrastructure and drivers
3 4
#

5 6 7 8 9 10 11 12
config ARCH_HAVE_CUSTOM_GPIO_H
	bool
	help
	  Selecting this config option from the architecture Kconfig allows
	  the architecture to provide a custom asm/gpio.h implementation
	  overriding the default implementations.  New uses of this are
	  strongly discouraged.

M
Michael Buesch 已提交
13
config ARCH_WANT_OPTIONAL_GPIOLIB
14
	bool
M
Michael Buesch 已提交
15 16 17 18 19 20 21 22 23 24 25
	help
	  Select this config option from the architecture Kconfig, if
	  it is possible to use gpiolib on the architecture, but let the
	  user decide whether to actually build it or not.
	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
	  not depend on GPIOs being available, but rather let the user
	  decide whether he needs it or not.

config ARCH_REQUIRE_GPIOLIB
	bool
	select GPIOLIB
26 27 28 29
	help
	  Platforms select gpiolib if they use this infrastructure
	  for all their GPIOs, usually starting with ones integrated
	  into SOC processors.
M
Michael Buesch 已提交
30 31 32 33 34 35 36 37 38 39
	  Selecting this from the architecture code will cause the gpiolib
	  code to always get built in.


menuconfig GPIOLIB
	bool "GPIO Support"
	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
40
	  one or more of the GPIO drivers below.
M
Michael Buesch 已提交
41 42

	  If unsure, say N.
43

M
Michael Buesch 已提交
44
if GPIOLIB
45

46 47 48 49
config GPIO_DEVRES
	def_bool y
	depends on HAS_IOMEM

50 51
config OF_GPIO
	def_bool y
D
David S. Miller 已提交
52
	depends on OF
53

M
Mathias Nyman 已提交
54 55 56 57
config GPIO_ACPI
	def_bool y
	depends on ACPI

58
config GPIOLIB_IRQCHIP
59
	select IRQ_DOMAIN
60 61
	bool

62 63 64 65 66
config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
67 68 69
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
70 71 72
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

D
David Brownell 已提交
73 74
config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
75
	depends on SYSFS
D
David Brownell 已提交
76 77 78 79 80 81 82 83 84 85 86 87
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

G
Grant Likely 已提交
88 89 90
config GPIO_GENERIC
	tristate

91
# put drivers in the right section, in alphabetical order
92

A
ashishj3 已提交
93 94
config GPIO_DA9052
	tristate "Dialog DA9052 GPIO"
95
	depends on PMIC_DA9052
A
ashishj3 已提交
96 97 98
	help
	  Say yes here to enable the GPIO driver for the DA9052 chip.

A
Ashish Jangam 已提交
99 100 101 102 103 104 105 106 107 108 109
config GPIO_DA9055
	tristate "Dialog Semiconductor DA9055 GPIO"
	depends on MFD_DA9055
	help
	  Say yes here to enable the GPIO driver for the DA9055 chip.

	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
	  be controller by this driver.

	  If driver is built as a module it will be called gpio-da9055.

110 111 112
config GPIO_MAX730X
	tristate

113
comment "Memory mapped GPIO drivers:"
114

115 116 117 118 119 120 121 122 123 124 125 126 127 128
config GPIO_74XX_MMIO
	tristate "GPIO driver for 74xx-ICs with MMIO access"
	depends on OF_GPIO
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO functionality for 74xx-compatible ICs
	  with MMIO access. Compatible models include:
	    1 bit:	741G125 (Input), 741G74 (Output)
	    2 bits:	742G125 (Input), 7474 (Output)
	    4 bits:	74125 (Input), 74175 (Output)
	    6 bits:	74365 (Input), 74174 (Output)
	    8 bits:	74244 (Input), 74273 (Output)
	    16 bits:	741624 (Input), 7416374 (Output)

129
config GPIO_CLPS711X
130
	tristate "CLPS711X GPIO support"
131
	depends on ARCH_CLPS711X || COMPILE_TEST
132 133 134
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO on CLPS711X SoCs.
135

136 137 138 139 140 141 142
config GPIO_DAVINCI
	bool "TI Davinci/Keystone GPIO support"
	default y if ARCH_DAVINCI
	depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
	help
	  Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.

G
Grant Likely 已提交
143 144 145
config GPIO_GENERIC_PLATFORM
	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
	select GPIO_GENERIC
146
	help
G
Grant Likely 已提交
147
	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
148

149 150
config GPIO_DWAPB
	tristate "Synopsys DesignWare APB GPIO driver"
L
Linus Walleij 已提交
151 152
	depends on ARM
	depends on OF_GPIO
153 154 155 156 157 158
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y or M here to build support for the Synopsys DesignWare APB
	  GPIO block.

159 160
config GPIO_IT8761E
	tristate "IT8761E GPIO support"
161
	depends on X86  # unconditional access to IO space.
162 163 164
	help
	  Say yes here to support GPIO functionality of IT8761E super I/O chip.

M
Magnus Damm 已提交
165 166
config GPIO_EM
	tristate "Emma Mobile GPIO"
167
	depends on ARM && OF_GPIO
M
Magnus Damm 已提交
168 169 170
	help
	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.

171 172 173
config GPIO_EP93XX
	def_bool y
	depends on ARCH_EP93XX
174
	select GPIO_GENERIC
175

176 177
config GPIO_ZEVIO
	bool "LSI ZEVIO SoC memory mapped GPIOs"
178
	depends on ARM && OF_GPIO
179 180 181
	help
	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.

182 183 184 185 186 187 188 189
config GPIO_MM_LANTIQ
	bool "Lantiq Memory mapped GPIOs"
	depends on LANTIQ && SOC_XWAY
	help
	  This enables support for memory mapped GPIOs on the External Bus Unit
	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
	  created by attaching a 16bit latch to the bus.

190 191 192 193 194 195 196 197 198 199
config GPIO_F7188X
	tristate "F71882FG and F71889F GPIO support"
	depends on X86
	help
	  This option enables support for GPIOs found on Fintek Super-I/O
	  chips F71882FG and F71889F.

	  To compile this driver as a module, choose M here: the module will
	  be called f7188x-gpio.

J
Jonas Jensen 已提交
200 201 202
config GPIO_MOXART
	bool "MOXART GPIO support"
	depends on ARCH_MOXART
203
	select GPIO_GENERIC
J
Jonas Jensen 已提交
204 205 206 207
	help
	  Select this option to enable GPIO driver for
	  MOXA ART SoC devices.

208 209 210 211
config GPIO_MPC5200
	def_bool y
	depends on PPC_MPC52xx

212 213 214 215 216 217 218 219
config GPIO_MPC8XXX
	bool "MPC512x/MPC8xxx GPIO support"
	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
		   FSL_SOC_BOOKE || PPC_86xx
	help
	  Say Y here if you're going to use hardware that connects to the
	  MPC512x/831x/834x/837x/8572/8610 GPIOs.

220 221
config GPIO_MSM_V1
	tristate "Qualcomm MSM GPIO v1"
222
	depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
223 224 225 226 227
	help
	  Say yes here to support the GPIO interface on ARM v6 based
	  Qualcomm MSM chips.  Most of the pins on the MSM can be
	  selected for GPIO, and are controlled by this driver.

228 229
config GPIO_MSM_V2
	tristate "Qualcomm MSM GPIO v2"
230
	depends on GPIOLIB && OF && ARCH_QCOM
231 232 233 234 235
	help
	  Say yes here to support the GPIO interface on ARM v7 based
	  Qualcomm MSM chips.  Most of the pins on the MSM can be
	  selected for GPIO, and are controlled by this driver.

236 237
config GPIO_MVEBU
	def_bool y
238
	depends on PLAT_ORION
239
	depends on OF
240 241 242
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP

243 244 245
config GPIO_MXC
	def_bool y
	depends on ARCH_MXC
G
Grant Likely 已提交
246
	select GPIO_GENERIC
247
	select GENERIC_IRQ_CHIP
G
Grant Likely 已提交
248 249 250 251

config GPIO_MXS
	def_bool y
	depends on ARCH_MXS
252
	select GPIO_GENERIC
253
	select GENERIC_IRQ_CHIP
254

255 256 257 258 259 260 261 262
config GPIO_OCTEON
	tristate "Cavium OCTEON GPIO"
	depends on GPIOLIB && CAVIUM_OCTEON_SOC
	default y
	help
	  Say yes here to support the on-chip GPIO lines on the OCTEON
	  family of SOCs.

263
config GPIO_OMAP
264
	bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
265
	default y if ARCH_OMAP
266 267
	depends on ARM
	select GENERIC_IRQ_CHIP
268
	select GPIOLIB_IRQCHIP
269 270 271
	help
	  Say yes here to enable GPIO support for TI OMAP SoCs.

272 273
config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
274
	depends on ARM_AMBA
275
	select IRQ_DOMAIN
276
	select GPIOLIB_IRQCHIP
277 278 279
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

280 281 282 283 284 285
config GPIO_PXA
	bool "PXA GPIO support"
	depends on ARCH_PXA || ARCH_MMP
	help
	  Say yes here to support the PXA GPIO device

M
Magnus Damm 已提交
286 287
config GPIO_RCAR
	tristate "Renesas R-Car GPIO"
288
	depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
289
	select GPIOLIB_IRQCHIP
M
Magnus Damm 已提交
290 291 292
	help
	  Say yes here to support GPIO on Renesas R-Car SoCs.

293 294 295 296 297 298 299
config GPIO_SAMSUNG
	bool
	depends on PLAT_SAMSUNG
	help
	  Legacy GPIO support. Use only for platforms without support for
	  pinctrl.

300 301 302 303 304 305 306 307 308
config GPIO_SCH311X
	tristate "SMSC SCH311x SuperI/O GPIO"
	help
	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
	  SCH3116 "Super I/O" chipsets.

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-sch311x.

309 310 311 312 313 314 315
config GPIO_SPEAR_SPICS
	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
	depends on PLAT_SPEAR
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support ST SPEAr SPI Chip Select as GPIO device

A
Alessandro Rubini 已提交
316 317 318 319 320 321 322 323
config GPIO_STA2X11
	bool "STA2x11/ConneXt GPIO support"
	depends on MFD_STA2X11
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support the STA2x11/ConneXt GPIO device.
	  The GPIO module has 128 GPIO pins with alternate functions.

324 325 326 327 328 329
config GPIO_SYSCON
	tristate "GPIO based on SYSCON"
	depends on MFD_SYSCON && OF
	help
	  Say yes here to support GPIO functionality though SYSCON driver.

330 331
config GPIO_TS5500
	tristate "TS-5500 DIO blocks and compatibles"
J
Jean Delvare 已提交
332
	depends on TS5500 || COMPILE_TEST
333 334 335 336 337 338
	help
	  This driver supports Digital I/O exposed by pin blocks found on some
	  Technologic Systems platforms. It includes, but is not limited to, 3
	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
	  LCD port.

339 340 341
config GPIO_TZ1090
	bool "Toumaz Xenif TZ1090 GPIO support"
	depends on SOC_TZ1090
342
	select GENERIC_IRQ_CHIP
343 344 345 346
	default y
	help
	  Say yes here to support Toumaz Xenif TZ1090 GPIOs.

347 348 349 350 351 352 353
config GPIO_TZ1090_PDC
	bool "Toumaz Xenif TZ1090 PDC GPIO support"
	depends on SOC_TZ1090
	default y
	help
	  Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.

354 355 356 357 358 359 360
config GPIO_VF610
	def_bool y
	depends on ARCH_MXC && SOC_VF610
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support Vybrid vf610 GPIOs.

361 362 363 364 365 366 367 368 369
config GPIO_XGENE
	bool "APM X-Gene GPIO controller support"
	depends on ARM64 && OF_GPIO
	help
	  This driver is to support the GPIO block within the APM X-Gene SoC
	  platform's generic flash controller. The GPIO pins are muxed with
	  the generic flash controller's address and data pins. Say yes
	  here to enable the GFC GPIO functionality.

370
config GPIO_XILINX
371
	tristate "Xilinx GPIO support"
372
	depends on OF_GPIO && (PPC_OF || MICROBLAZE || ARCH_ZYNQ || X86)
373 374 375
	help
	  Say yes here to support the Xilinx FPGA GPIO device

376 377 378 379 380 381 382
config GPIO_ZYNQ
	tristate "Xilinx Zynq GPIO support"
	depends on ARCH_ZYNQ
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support Xilinx Zynq GPIO controller.

B
Baruch Siach 已提交
383 384 385
config GPIO_XTENSA
	bool "Xtensa GPIO32 support"
	depends on XTENSA
386
	depends on HAVE_XTENSA_GPIO32
B
Baruch Siach 已提交
387 388 389 390 391
	depends on !SMP
	help
	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
	  and EXPSTATE (output) ports

392 393 394 395 396 397
config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

398
config GPIO_SCH
399
	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
400
	depends on PCI && X86
401
	select MFD_CORE
402 403
	select LPC_SCH
	help
404
	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
405 406 407
	  Intel Tunnel Creek processor, Intel Centerton processor or
	  Intel Quark X1000 SoC.

408 409 410 411 412 413
	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
	  powered by the core power rail and are turned off during sleep
	  modes (S3 and higher). The remaining four GPIOs are powered by
	  the Intel SCH suspend power supply. These GPIOs remain
	  active during S3. The suspend powered GPIOs can be used to wake the
	  system from the Suspend-to-RAM state.
414

415 416
	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
	  core power rail and 9 from suspend power supply.
417

418 419 420
	  The Intel Centerton processor has a total of 30 GPIO pins.
	  Twenty-one are powered by the core power rail and 9 from the
	  suspend power supply.
421

422 423 424
	  The Intel Quark X1000 SoC has 2 GPIOs powered by the core
	  power well and 6 from the suspend power well.

425 426 427 428 429 430 431 432 433 434 435 436
config GPIO_ICH
	tristate "Intel ICH GPIO"
	depends on PCI && X86
	select MFD_CORE
	select LPC_ICH
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).

	  If unsure, say N.
437

438 439 440 441 442 443 444 445
config GPIO_IOP
	tristate "Intel IOP GPIO"
	depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  IOP32X or IOP33X.

	  If unsure, say N.
446

D
Daniel Drake 已提交
447 448
config GPIO_VX855
	tristate "VIA VX855/VX875 GPIO"
449
	depends on PCI
D
Daniel Drake 已提交
450 451 452 453 454 455 456 457 458
	select MFD_CORE
	select MFD_VX855
	help
	  Support access to the VX855/VX875 GPIO lines through the gpio library.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

459 460 461 462 463 464 465 466 467 468 469
config GPIO_GE_FPGA
	bool "GE FPGA based GPIO"
	depends on GE_FPGA
	help
	  Support for common GPIO functionality provided on some GE Single Board
	  Computers.

	  This driver provides basic support (configure as input or output, read
	  and write pin state) for GPIO implemented in a number of GE single
	  board computers.

470
config GPIO_LYNXPOINT
471
	tristate "Intel Lynxpoint GPIO support"
472
	depends on ACPI && X86
473
	select GPIOLIB_IRQCHIP
474 475 476 477
	help
	  driver for GPIO functionality on Intel Lynxpoint PCH chipset
	  Requires ACPI device enumeration code to set up a platform device.

478 479 480 481 482 483 484 485 486
config GPIO_GRGPIO
	tristate "Aeroflex Gaisler GRGPIO support"
	depends on OF
	select GPIO_GENERIC
	select IRQ_DOMAIN
	help
	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
	  VHDL IP core library.

C
Christian Ruppert 已提交
487 488
config GPIO_TB10X
	bool
489
	select GENERIC_IRQ_CHIP
C
Christian Ruppert 已提交
490 491
	select OF_GPIO

492 493
comment "I2C GPIO expanders:"

494 495 496 497 498 499
config GPIO_ARIZONA
	tristate "Wolfson Microelectronics Arizona class devices"
	depends on MFD_ARIZONA
	help
	  Support for GPIOs on Wolfson Arizona class devices.

500 501 502 503 504 505 506 507 508 509 510 511 512
config GPIO_CRYSTAL_COVE
	tristate "GPIO support for Crystal Cove PMIC"
	depends on INTEL_SOC_PMIC
	select GPIOLIB_IRQCHIP
	help
	  Support for GPIO pins on Crystal Cove PMIC.

	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
	  inside.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-crystalcove.

513 514 515 516 517 518 519 520
config GPIO_LP3943
	tristate "TI/National Semiconductor LP3943 GPIO expander"
	depends on MFD_LP3943
	help
	  GPIO driver for LP3943 MFD.
	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
	  Open drain outputs are required for this usage.

521 522 523 524 525
config GPIO_MAX7300
	tristate "Maxim MAX7300 GPIO expander"
	depends on I2C
	select GPIO_MAX730X
	help
526
	  GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
527

E
Eric Miao 已提交
528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546
config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	depends on I2C
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

547 548
config GPIO_MAX732X_IRQ
	bool "Interrupt controller support for MAX732x"
549
	depends on GPIO_MAX732X=y
550 551 552 553
	help
	  Say yes here to enable the max732x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

554 555
config GPIO_MC9S08DZ60
	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
556
	depends on I2C=y && MACH_MX35_3DS
557 558 559
	help
	  Select this to enable the MC9S08DZ60 GPIO driver

560
config GPIO_PCA953X
A
Aaron Sierra 已提交
561
	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
562 563
	depends on I2C
	help
564 565 566 567 568 569
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

570
	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
A
Aaron Sierra 已提交
571
			pca9556, pca9557, pca9574, tca6408, xra1202
572

573 574
	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
			tca6416
575

576 577
	  24 bits:	tca6424

A
Aaron Sierra 已提交
578
	  40 bits:	pca9505, pca9698
579

580 581 582
config GPIO_PCA953X_IRQ
	bool "Interrupt controller support for PCA953x"
	depends on GPIO_PCA953X=y
583
	select GPIOLIB_IRQCHIP
584 585 586 587
	help
	  Say yes here to enable the pca953x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

588
config GPIO_PCF857X
589
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
590
	depends on I2C
A
Arnd Bergmann 已提交
591
	select IRQ_DOMAIN
592 593 594 595 596 597 598
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
599 600
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329
601 602 603 604 605 606 607 608 609 610 611 612

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

613 614 615 616 617 618 619 620 621
config GPIO_RC5T583
	bool "RICOH RC5T583 GPIO"
	depends on MFD_RC5T583
	help
	  Select this option to enable GPIO driver for the Ricoh RC5T583
	  chip family.
	  This driver provides the support for driving/reading the gpio pins
	  of RC5T583 device through standard gpio library.

622 623 624
config GPIO_SX150X
	bool "Semtech SX150x I2C GPIO expander"
	depends on I2C=y
625
	select GPIOLIB_IRQCHIP
626 627 628 629 630 631 632 633
	default n
	help
	  Say yes here to provide support for Semtech SX150-series I2C
	  GPIO expanders. Compatible models include:

	  8 bits:  sx1508q
	  16 bits: sx1509q

R
Rabin Vincent 已提交
634 635 636
config GPIO_STMPE
	bool "STMPE GPIOs"
	depends on MFD_STMPE
637
	select GPIOLIB_IRQCHIP
R
Rabin Vincent 已提交
638 639 640 641
	help
	  This enables support for the GPIOs found on the STMPE I/O
	  Expanders.

642 643 644 645 646 647 648 649 650 651
config GPIO_STP_XWAY
	bool "XWAY STP GPIOs"
	depends on SOC_XWAY
	help
	  This enables support for the Serial To Parallel (STP) unit found on
	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
	  that can be up to 24 bit. This peripheral is aimed at driving leds.
	  Some of the gpios/leds can be auto updated by the soc with dsl and
	  phy status.

652 653 654
config GPIO_TC3589X
	bool "TC3589X GPIOs"
	depends on MFD_TC3589X
655
	select GPIOLIB_IRQCHIP
R
Rabin Vincent 已提交
656
	help
657
	  This enables support for the GPIOs found on the TC3589X
R
Rabin Vincent 已提交
658 659
	  I/O Expander.

660 661 662 663 664 665
config GPIO_TPS65912
	tristate "TI TPS65912 GPIO"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	  This driver supports TPS65912 gpio chip

D
David Brownell 已提交
666 667 668 669 670 671 672
config GPIO_TWL4030
	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	depends on TWL4030_CORE
	help
	  Say yes here to access the GPIO signals of various multi-function
	  power management chips from Texas Instruments.

673 674 675 676 677 678 679
config GPIO_TWL6040
	tristate "TWL6040 GPO"
	depends on TWL6040_CORE
	help
	  Say yes here to access the GPO signals of twl6040
	  audio chip from Texas Instruments.

M
Mark Brown 已提交
680 681 682 683 684 685 686
config GPIO_WM831X
	tristate "WM831x GPIOs"
	depends on MFD_WM831X
	help
	  Say yes here to access the GPIO signals of WM831x power management
	  chips from Wolfson Microelectronics.

687 688 689 690 691 692 693
config GPIO_WM8350
	tristate "WM8350 GPIOs"
	depends on MFD_WM8350
	help
	  Say yes here to access the GPIO signals of WM8350 power management
	  chips from Wolfson Microelectronics.

M
Mark Brown 已提交
694 695 696 697 698 699 700
config GPIO_WM8994
	tristate "WM8994 GPIOs"
	depends on MFD_WM8994
	help
	  Say yes here to access the GPIO signals of WM8994 audio hub
	  CODECs from Wolfson Microelectronics.

701 702 703 704 705 706 707
config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

708 709 710 711 712 713 714
config GPIO_ADP5588
	tristate "ADP5588 I2C GPIO expander"
	depends on I2C
	help
	  This option enables support for 18 GPIOs found
	  on Analog Devices ADP5588 GPIO Expanders.

715 716 717 718 719 720 721
config GPIO_ADP5588_IRQ
	bool "Interrupt controller support for ADP5588"
	depends on GPIO_ADP5588=y
	help
	  Say yes here to enable the adp5588 to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

722 723
config GPIO_ADNP
	tristate "Avionic Design N-bit GPIO expander"
724
	depends on I2C && OF_GPIO
725
	select GPIOLIB_IRQCHIP
726 727 728
	help
	  This option enables support for N GPIOs found on Avionic Design
	  I2C GPIO expanders. The register space will be extended by powers
729
	  of two, so the controller will need to accommodate for that. For
730 731 732 733
	  example: if a controller provides 48 pins, 6 registers will be
	  enough to represent all pins, but the driver will assume a
	  register layout for 64 pins (8 registers).

M
Michael Buesch 已提交
734 735
comment "PCI GPIO expanders:"

736 737
config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
738
	depends on MFD_CS5535
739 740 741 742 743 744 745
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

M
Michael Buesch 已提交
746 747 748 749
config GPIO_BT8XX
	tristate "BT8XX GPIO abuser"
	depends on PCI && VIDEO_BT848=n
	help
G
Geert Uytterhoeven 已提交
750
	  The BT8xx frame grabber chip has 24 GPIO pins that can be abused
M
Michael Buesch 已提交
751 752 753 754 755 756 757 758 759 760 761
	  as a cheap PCI GPIO card.

	  This chip can be found on Miro, Hauppauge and STB TV-cards.

	  The card needs to be physically altered for using it as a
	  GPIO card. For more information on how to build a GPIO card
	  from a BT8xx TV card, see the documentation file at
	  Documentation/bt8xxgpio.txt

	  If unsure, say N.

762 763 764 765 766 767 768 769 770 771 772 773
config GPIO_AMD8111
	tristate "AMD 8111 GPIO driver"
	depends on PCI
	help
	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.

	  Note, that usually system firmware/ACPI handles GPIO pins on their
	  own and users might easily break their systems with uncarefull usage
	  of this driver!

	  If unsure, say N

774 775
config GPIO_INTEL_MID
	bool "Intel Mid GPIO support"
776
	depends on PCI && X86
777
	select GPIOLIB_IRQCHIP
778
	help
779
	  Say Y here to support Intel Mid GPIO.
780

781
config GPIO_PCH
782
	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
783
	depends on PCI && (X86_32 || COMPILE_TEST)
784
	select GENERIC_IRQ_CHIP
785 786 787 788 789
	help
	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
	  which is an IOH(Input/Output Hub) for x86 embedded processor.
	  This driver can access PCH GPIO device.

790 791
	  This driver also can be used for LAPIS Semiconductor IOH(Input/
	  Output Hub), ML7223 and ML7831.
792
	  ML7223 IOH is for MP(Media Phone) use.
793 794 795
	  ML7831 IOH is for general purpose use.
	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
796

797 798 799
config GPIO_ML_IOH
	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
	depends on PCI
800
	select GENERIC_IRQ_CHIP
801 802 803 804 805 806
	help
	  ML7213 is companion chip for Intel Atom E6xx series.
	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
	  Hub) which is for IVI(In-Vehicle Infotainment) use.
	  This driver can access the IOH's GPIO device.

807 808
config GPIO_SODAVILLE
	bool "Intel Sodaville GPIO support"
809
	depends on X86 && PCI && OF
810 811 812 813 814
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y here to support Intel Sodaville GPIO.

815 816
config GPIO_TIMBERDALE
	bool "Support for timberdale GPIO IP"
817
	depends on MFD_TIMBERDALE
818 819 820
	---help---
	Add support for the GPIO IP in the timberdale FPGA.

821 822
config GPIO_RDC321X
	tristate "RDC R-321x GPIO support"
823
	depends on PCI
824
	select MFD_CORE
825 826 827 828 829
	select MFD_RDC321X
	help
	  Support for the RDC R321x SoC GPIOs over southbridge
	  PCI configuration space.

830 831
comment "SPI GPIO expanders:"

832 833 834
config GPIO_MAX7301
	tristate "Maxim MAX7301 GPIO expander"
	depends on SPI_MASTER
835
	select GPIO_MAX730X
836
	help
837
	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
838

839
config GPIO_MCP23S08
P
Peter Korsgaard 已提交
840
	tristate "Microchip MCP23xxx I/O expander"
841
	depends on (SPI_MASTER && !I2C) || I2C
842
	help
P
Peter Korsgaard 已提交
843 844
	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
	  I/O expanders.
845
	  This provides a GPIO interface supporting inputs and outputs.
846
	  The I2C versions of the chips can be used as interrupt-controller.
847

R
Richard Röjfors 已提交
848 849 850 851 852 853 854
config GPIO_MC33880
	tristate "Freescale MC33880 high-side/low-side switch"
	depends on SPI_MASTER
	help
	  SPI driver for Freescale MC33880 high-side/low-side switch.
	  This provides GPIO interface supporting inputs and outputs.

855 856
config GPIO_74X164
	tristate "74x164 serial-in/parallel-out 8-bits shift register"
857
	depends on SPI_MASTER && OF
858
	help
859 860
	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
	  shift registers. This driver can be used to provide access
861 862
	  to more gpio outputs.

863 864 865
comment "AC97 GPIO expanders:"

config GPIO_UCB1400
866
	tristate "Philips UCB1400 GPIO"
867 868 869 870 871
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 GPIO pins.
	  The UCB1400 is an AC97 audio codec.

G
Guenter Roeck 已提交
872 873 874 875 876 877 878 879 880 881 882 883
comment "LPC GPIO expanders:"

config GPIO_KEMPLD
	tristate "Kontron ETX / COMexpress GPIO"
	depends on MFD_KEMPLD
	help
	  This enables support for the PLD GPIO interface on some Kontron ETX
	  and COMexpress (ETXexpress) modules.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-kempld.

884 885 886 887 888 889 890 891 892 893
comment "MODULbus GPIO expanders:"

config GPIO_JANZ_TTL
	tristate "Janz VMOD-TTL Digital IO Module"
	depends on MFD_JANZ_CMODIO
	help
	  This enables support for the Janz VMOD-TTL Digital IO module.
	  This driver provides support for driving the pins in output
	  mode only. Input mode is not supported.

894 895 896 897 898 899 900
config GPIO_PALMAS
	bool "TI PALMAS series PMICs GPIO"
	depends on MFD_PALMAS
	help
	  Select this option to enable GPIO driver for the TI PALMAS
	  series chip family.

901 902 903 904 905 906 907
config GPIO_TPS6586X
	bool "TPS6586X GPIO"
	depends on MFD_TPS6586X
	help
	  Select this option to enable GPIO driver for the TPS6586X
	  chip family.

908 909 910 911 912 913
config GPIO_TPS65910
	bool "TPS65910 GPIO"
	depends on MFD_TPS65910
	help
	  Select this option to enable GPIO driver for the TPS65910
	  chip family.
M
Mathias Nyman 已提交
914 915 916 917 918 919 920 921

config GPIO_MSIC
	bool "Intel MSIC mixed signal gpio support"
	depends on MFD_INTEL_MSIC
	help
	  Enable support for GPIO on intel MSIC controllers found in
	  intel MID devices

M
Markus Mayer 已提交
922 923
config GPIO_BCM_KONA
	bool "Broadcom Kona GPIO"
924
	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
M
Markus Mayer 已提交
925 926 927
	help
	  Turn on GPIO support for Broadcom "Kona" chips.

L
Lars Poeschel 已提交
928 929 930 931 932 933 934 935 936 937 938 939 940
comment "USB GPIO expanders:"

config GPIO_VIPERBOARD
	tristate "Viperboard GPIO a & b support"
	depends on MFD_VIPERBOARD && USB
	help
	  Say yes here to access the GPIO signals of Nano River
	  Technologies Viperboard. There are two GPIO chips on the
	  board: gpioa and gpiob.
          See viperboard API specification and Nano
          River Tech's viperboard.h for detailed meaning
          of the module parameters.

941 942 943 944 945 946 947 948 949 950 951 952
config GPIO_DLN2
	tristate "Diolan DLN2 GPIO support"
	depends on MFD_DLN2
	select GPIOLIB_IRQCHIP

	help
	  Select this option to enable GPIO driver for the Diolan DLN2
	  board.

	  This driver can also be built as a module. If so, the module
	  will be called gpio-dln2.

M
Michael Buesch 已提交
953
endif