Kconfig 22.0 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5
#
# USB Host Controller Drivers
#
comment "USB Host Controller Drivers"

6 7 8 9 10 11 12 13 14 15 16 17
config USB_C67X00_HCD
	tristate "Cypress C67x00 HCD support"
	help
	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
	  host/peripheral/OTG USB controllers.

	  Enable this option to support this chip in host controller mode.
	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called c67x00.

18
config USB_XHCI_HCD
19
	tristate "xHCI HCD (USB 3.0) support"
20 21 22 23 24 25 26
	---help---
	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
	  "SuperSpeed" host controller hardware.

	  To compile this driver as a module, choose M here: the
	  module will be called xhci-hcd.

27 28
if USB_XHCI_HCD

29 30 31
config USB_XHCI_PLATFORM
	tristate

32 33 34 35 36 37 38 39 40
config USB_XHCI_HCD_DEBUGGING
	bool "Debugging for the xHCI host controller"
	---help---
	  Say 'Y' to turn on debugging for the xHCI host controller driver.
	  This will spew debugging output, even in interrupt context.
	  This should only be used for debugging xHCI driver bugs.

	  If unsure, say N.

41 42
endif # USB_XHCI_HCD

L
Linus Torvalds 已提交
43 44 45 46 47 48
config USB_EHCI_HCD
	tristate "EHCI HCD (USB 2.0) support"
	---help---
	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
	  If your USB host controller supports USB 2.0, you will likely want to
49
	  configure this Host Controller Driver.
L
Linus Torvalds 已提交
50 51 52

	  EHCI controllers are packaged with "companion" host controllers (OHCI
	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
53
	  will connect to EHCI if the device is high speed, otherwise they
L
Linus Torvalds 已提交
54 55 56 57 58 59 60 61 62 63 64
	  connect to a companion controller.  If you configure EHCI, you should
	  probably configure the OHCI (for NEC and some other vendors) USB Host
	  Controller Driver or UHCI (for Via motherboards) Host Controller
	  Driver too.

	  You may want to read <file:Documentation/usb/ehci.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called ehci-hcd.

config USB_EHCI_ROOT_HUB_TT
65
	bool "Root Hub Transaction Translators"
66
	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
L
Linus Torvalds 已提交
67 68 69 70 71 72
	---help---
	  Some EHCI chips have vendor-specific extensions to integrate
	  transaction translators, so that no OHCI or UHCI companion
	  controller is needed.  It's safe to say "y" even if your
	  controller doesn't support this feature.

73 74 75 76
	  This supports the EHCI implementation that's originally
	  from ARC, and has since changed hands a few times.

config USB_EHCI_TT_NEWSCHED
77
	bool "Improved Transaction Translator scheduling"
78
	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
79
	default y
80 81 82 83 84 85 86 87 88 89
	---help---
	  This changes the periodic scheduling code to fill more of the low
	  and full speed bandwidth available from the Transaction Translator
	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
	  issued in each microframe, significantly reducing the number of
	  periodic low/fullspeed transfers possible.

	  If you have multiple periodic low/fullspeed devices connected to a
	  highspeed USB hub which is connected to a highspeed USB Host
	  Controller, and some of those devices will not work correctly
90 91 92
	  (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
	  you have only one such device and it doesn't work, you could try
	  saying N.
93

94
	  If unsure, say Y.
L
Linus Torvalds 已提交
95

96 97 98 99 100
config USB_FSL_MPH_DR_OF
	tristate

if USB_EHCI_HCD

101 102
config USB_EHCI_PCI
	tristate
103
	depends on PCI
104 105
	default y

106 107
config USB_EHCI_HCD_PMC_MSP
	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
108
	depends on MSP_HAS_USB
109 110 111 112 113 114 115
	default n
	select USB_EHCI_BIG_ENDIAN_DESC
	select USB_EHCI_BIG_ENDIAN_MMIO
	---help---
		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
		If unsure, say N.

116 117 118
config USB_EHCI_BIG_ENDIAN_MMIO
	bool

119 120 121
config USB_EHCI_BIG_ENDIAN_DESC
	bool

122 123
config XPS_USB_HCD_XILINX
	bool "Use Xilinx usb host EHCI controller core"
124
	depends on (PPC32 || MICROBLAZE)
125 126 127 128 129 130 131 132
	select USB_EHCI_BIG_ENDIAN_DESC
	select USB_EHCI_BIG_ENDIAN_MMIO
	---help---
		Xilinx xps USB host controller core is EHCI compilant and has
		transaction translator built-in. It can be configured to either
		support both high speed and full speed devices, or high speed
		devices only.

133
config USB_EHCI_FSL
134
	bool "Support for Freescale PPC on-chip EHCI USB controller"
135
	depends on FSL_SOC
136
	select USB_EHCI_ROOT_HUB_TT
137
	select USB_FSL_MPH_DR_OF if OF
138 139 140 141
	---help---
	  Variation of ARC USB block used in some Freescale chips.

config USB_EHCI_MXC
142
	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
143
	depends on ARCH_MXC
144
	select USB_EHCI_ROOT_HUB_TT
145 146 147
	---help---
	  Variation of ARC USB block used in some Freescale chips.

148
config USB_EHCI_HCD_OMAP
149
	tristate "EHCI support for OMAP3 and later chips"
150
	depends on ARCH_OMAP
151
	default y
152
	---help---
153 154
	  Enables support for the on-chip EHCI controller on
	  OMAP3 and later chips.
155 156 157
	  If your system uses a PHY on the USB port, you will need to
	  enable USB_PHY and the appropriate PHY driver as well. Most
	  boards need the NOP_USB_XCEIV PHY driver.
158

159 160 161 162 163 164 165 166 167 168 169
config USB_EHCI_HCD_ORION
	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
	depends on USB_EHCI_HCD && PLAT_ORION
	default y
	---help---
	  Enables support for the on-chip EHCI controller on Marvell's
	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
	  Armada 370.  This is different from the EHCI implementation
	  on Marvell's mobile PXA and MMP SoC, see "EHCI support for
	  Marvell PXA/MMP USB controller" for those.

170 171 172 173 174 175 176 177
config USB_EHCI_HCD_SPEAR
        tristate "Support for ST SPEAr on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && PLAT_SPEAR
        default y
        ---help---
          Enables support for the on-chip EHCI controller on
          ST SPEAr chips.

178 179 180 181 182 183 184 185
config USB_EHCI_HCD_AT91
        tristate  "Support for Atmel on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && ARCH_AT91
        default y
        ---help---
          Enables support for the on-chip EHCI controller on
          Atmel chips.

186
config USB_EHCI_MSM
187
	tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
188
	depends on ARCH_MSM
189
	depends on USB_PHY
190
	select USB_EHCI_ROOT_HUB_TT
191
	select USB_MSM_OTG
192 193 194 195
	---help---
	  Enables support for the USB Host controller present on the
	  Qualcomm chipsets. Root Hub has inbuilt TT.
	  This driver depends on OTG driver for PHY initialization,
196
	  clock management, powering up VBUS, and power management.
197 198
	  This driver is not supported on boards like trout which
	  has an external PHY.
199

200
config USB_EHCI_TEGRA
201
       tristate "NVIDIA Tegra HCD support"
202
       depends on ARCH_TEGRA
203
       select USB_EHCI_ROOT_HUB_TT
204
       select USB_PHY
205 206 207 208
       help
         This driver enables support for the internal USB Host Controllers
         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.

209 210
config USB_EHCI_HCD_PPC_OF
	bool "EHCI support for PPC USB controller on OF platform bus"
211
	depends on PPC_OF
212 213 214 215 216
	default y
	---help---
	  Enables support for the USB controller present on the PowerPC
	  OpenFirmware platform bus.

217 218
config USB_EHCI_SH
	bool "EHCI support for SuperH USB controller"
219
	depends on SUPERH
220 221 222 223
	---help---
	  Enables support for the on-chip EHCI controller on the SuperH.
	  If you use the PCI EHCI controller, this option is not necessary.

224
config USB_EHCI_S5P
225
       tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
226
       depends on PLAT_S5P || ARCH_EXYNOS
227
       help
228 229
	Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
	on-chip EHCI controller.
230

231
config USB_EHCI_MV
232
	bool "EHCI support for Marvell PXA/MMP USB controller"
233
	depends on (ARCH_PXA || ARCH_MMP)
234 235 236 237 238
	select USB_EHCI_ROOT_HUB_TT
	---help---
	  Enables support for Marvell (including PXA and MMP series) on-chip
	  USB SPH and OTG controller. SPH is a single port host, and it can
	  only be EHCI host. OTG is controller that can switch to host mode.
239 240 241 242
	  Note that this driver will not work on Marvell's other EHCI
	  controller used by the EBU-type SoCs including Orion, Kirkwood,
	  Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
	  on-chip EHCI USB controller" for those.
243

244 245
config USB_W90X900_EHCI
	bool "W90X900(W90P910) EHCI support"
246
	depends on ARCH_W90X900
247 248 249
	---help---
		Enables support for the W90X900 USB controller

250
config USB_CNS3XXX_EHCI
251
	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
252
	depends on ARCH_CNS3XXX
253
	select USB_EHCI_HCD_PLATFORM
254
	---help---
255 256 257
	  This option is deprecated now and the driver was removed, use
	  USB_EHCI_HCD_PLATFORM instead.

258 259 260 261
	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
	  support.

262
config USB_EHCI_ATH79
263
	bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
264
	depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
265
	select USB_EHCI_ROOT_HUB_TT
266
	select USB_EHCI_HCD_PLATFORM
267 268
	default y
	---help---
269 270 271
	  This option is deprecated now and the driver was removed, use
	  USB_EHCI_HCD_PLATFORM instead.

272 273 274
	  Enables support for the built-in EHCI controller present
	  on the Atheros AR7XXX/AR9XXX SoCs.

275 276 277 278 279 280 281 282 283 284 285
config USB_EHCI_HCD_PLATFORM
	tristate "Generic EHCI driver for a platform device"
	default n
	---help---
	  Adds an EHCI host driver for a generic platform device, which
	  provides a memory space and an irq.

	  If unsure, say N.

config USB_OCTEON_EHCI
	bool "Octeon on-chip EHCI support"
286
	depends on CAVIUM_OCTEON_SOC
287 288 289 290 291 292 293 294 295 296
	default n
	select USB_EHCI_BIG_ENDIAN_MMIO
	help
	  Enable support for the Octeon II SOC's on-chip EHCI
	  controller.  It is needed for high-speed (480Mbit/sec)
	  USB 2.0 device support.  All CN6XXX based chips with USB are
	  supported.

endif # USB_EHCI_HCD

297 298
config USB_OXU210HP_HCD
	tristate "OXU210HP HCD support"
299
	depends on GENERIC_HARDIRQS
300 301 302 303 304 305 306 307 308 309
	---help---
	  The OXU210HP is an USB host/OTG/device controller. Enable this
	  option if your board has this chip. If unsure, say N.

	  This driver does not support isochronous transfers and doesn't
	  implement OTG nor USB device controllers.

	  To compile this driver as a module, choose M here: the
	  module will be called oxu210hp-hcd.

310 311 312 313 314 315 316 317 318 319 320
config USB_ISP116X_HCD
	tristate "ISP116X HCD support"
	---help---
	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
	  option if your board has this chip. If unsure, say N.

	  This driver does not support isochronous transfers.

	  To compile this driver as a module, choose M here: the
	  module will be called isp116x-hcd.

S
Sebastian Siewior 已提交
321 322 323 324 325 326
config USB_ISP1760_HCD
	tristate "ISP 1760 HCD support"
	---help---
	  The ISP1760 chip is a USB 2.0 host controller.

	  This driver does not support isochronous transfers or OTG.
327 328 329 330
	  This USB controller is usually attached to a non-DMA-Master
	  capable bus. NXP's eval kit brings this chip on PCI card
	  where the chip itself is behind a PLB to simulate such
	  a bus.
S
Sebastian Siewior 已提交
331 332

	  To compile this driver as a module, choose M here: the
333
	  module will be called isp1760.
S
Sebastian Siewior 已提交
334

335 336 337 338 339 340 341 342 343 344 345
config USB_ISP1362_HCD
	tristate "ISP1362 HCD support"
	default N
	---help---
	  Supports the Philips ISP1362 chip as a host controller

	  This driver does not support isochronous transfers.

	  To compile this driver as a module, choose M here: the
	  module will be called isp1362-hcd.

346 347 348 349 350 351 352 353 354 355 356
config USB_FUSBH200_HCD
	tristate "FUSBH200 HCD support"
	depends on USB
	default N
	---help---
	Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
	with minor modification.

	To compile this driver as a module, choose M here: the
	module will be called fusbh200-hcd.

L
Linus Torvalds 已提交
357
config USB_OHCI_HCD
358
	tristate "OHCI HCD (USB 1.1) support"
L
Linus Torvalds 已提交
359
	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
360
	depends on USB_ISP1301 || !ARCH_LPC32XX
L
Linus Torvalds 已提交
361 362 363 364 365 366 367 368 369 370 371 372 373
	---help---
	  The Open Host Controller Interface (OHCI) is a standard for accessing
	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
	  UHCI specification.  If your USB host controller follows the OHCI spec,
	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
	  USB controller from Intel or VIA, this is appropriate.  If your host
	  controller doesn't use PCI, this is probably appropriate.  For a PCI
	  based system where you're not sure, the "lspci -v" entry will list the
	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.

	  To compile this driver as a module, choose M here: the
	  module will be called ohci-hcd.

374 375
if USB_OHCI_HCD

376 377
config USB_OHCI_HCD_OMAP1
	bool "OHCI support for OMAP1/2 chips"
378
	depends on ARCH_OMAP1
379 380 381 382 383 384
	default y
	---help---
	  Enables support for the OHCI controller on OMAP1/2 chips.

config USB_OHCI_HCD_OMAP3
	bool "OHCI support for OMAP3 and later chips"
385
	depends on (ARCH_OMAP3 || ARCH_OMAP4)
386 387 388 389 390
	default y
	---help---
	  Enables support for the on-chip OHCI controller on
	  OMAP3 and later chips.

391
config USB_OHCI_ATH79
392
	bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
393
	depends on (SOC_AR71XX || SOC_AR724X)
394
	select USB_OHCI_HCD_PLATFORM
395 396
	default y
	help
397 398 399
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

400 401 402
	  Enables support for the built-in OHCI controller present on the
	  Atheros AR71XX/AR7240 SoCs.

403
config USB_OHCI_HCD_PPC_OF_BE
A
Arnd Bergmann 已提交
404
	bool "OHCI support for OF platform bus (big endian)"
405
	depends on PPC_OF
406 407
	select USB_OHCI_BIG_ENDIAN_DESC
	select USB_OHCI_BIG_ENDIAN_MMIO
A
Arnd Bergmann 已提交
408 409 410
	---help---
	  Enables support for big-endian USB controllers present on the
	  OpenFirmware platform bus.
411 412

config USB_OHCI_HCD_PPC_OF_LE
A
Arnd Bergmann 已提交
413
	bool "OHCI support for OF platform bus (little endian)"
414
	depends on PPC_OF
415
	select USB_OHCI_LITTLE_ENDIAN
A
Arnd Bergmann 已提交
416 417 418 419 420 421
	---help---
	  Enables support for little-endian USB controllers present on the
	  OpenFirmware platform bus.

config USB_OHCI_HCD_PPC_OF
	bool
422
	depends on PPC_OF
A
Arnd Bergmann 已提交
423
	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
424

L
Linus Torvalds 已提交
425
config USB_OHCI_HCD_PCI
426 427
	tristate "OHCI support for PCI-bus USB controllers"
	depends on PCI
L
Linus Torvalds 已提交
428 429 430 431 432 433
	default y
	select USB_OHCI_LITTLE_ENDIAN
	---help---
	  Enables support for PCI-bus plug-in USB controller cards.
	  If unsure, say Y.

M
Michael Buesch 已提交
434
config USB_OHCI_HCD_SSB
435
	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
436
	depends on (SSB = y || SSB = USB_OHCI_HCD)
437 438
	select USB_HCD_SSB
	select USB_OHCI_HCD_PLATFORM
M
Michael Buesch 已提交
439 440
	default n
	---help---
441 442 443
	  This option is deprecated now and the driver was removed, use
	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.

M
Michael Buesch 已提交
444 445 446 447 448 449 450 451
	  Support for the Sonics Silicon Backplane (SSB) attached
	  Broadcom USB OHCI core.

	  This device is present in some embedded devices with
	  Broadcom based SSB bus.

	  If unsure, say N.

452
config USB_OHCI_SH
453
	bool "OHCI support for SuperH USB controller (DEPRECATED)"
454
	depends on SUPERH
455
	select USB_OHCI_HCD_PLATFORM
456
	---help---
457 458 459
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

460 461 462
	  Enables support for the on-chip OHCI controller on the SuperH.
	  If you use the PCI OHCI controller, this option is not necessary.

J
Jingoo Han 已提交
463 464
config USB_OHCI_EXYNOS
	boolean "OHCI support for Samsung EXYNOS SoC Series"
465
	depends on ARCH_EXYNOS
J
Jingoo Han 已提交
466 467 468
	help
	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.

469
config USB_CNS3XXX_OHCI
470
	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
471
	depends on ARCH_CNS3XXX
472
	select USB_OHCI_HCD_PLATFORM
473
	---help---
474 475 476
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

477 478 479
	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
	  It is needed for low-speed USB 1.0 device support.

480
config USB_OHCI_HCD_PLATFORM
481
	tristate "Generic OHCI driver for a platform device"
482 483 484
	default n
	---help---
	  Adds an OHCI host driver for a generic platform device, which
485
	  provides a memory space and an irq.
486 487 488

	  If unsure, say N.

489 490
config USB_OCTEON_OHCI
	bool "Octeon on-chip OHCI support"
491
	depends on CAVIUM_OCTEON_SOC
492 493 494 495 496 497 498 499
	default USB_OCTEON_EHCI
	select USB_OHCI_BIG_ENDIAN_MMIO
	select USB_OHCI_LITTLE_ENDIAN
	help
	  Enable support for the Octeon II SOC's on-chip OHCI
	  controller.  It is needed for low-speed USB 1.0 device
	  support.  All CN6XXX based chips with USB are supported.

500

501 502 503 504 505
config USB_OHCI_BIG_ENDIAN_DESC
	bool
	default n

config USB_OHCI_BIG_ENDIAN_MMIO
L
Linus Torvalds 已提交
506 507 508 509 510 511 512 513
	bool
	default n

config USB_OHCI_LITTLE_ENDIAN
	bool
	default n if STB03xxx || PPC_MPC52xx
	default y

514 515
endif # USB_OHCI_HCD

L
Linus Torvalds 已提交
516 517
config USB_UHCI_HCD
	tristate "UHCI HCD (most Intel and VIA) support"
518
	depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
L
Linus Torvalds 已提交
519 520 521 522 523 524 525 526
	---help---
	  The Universal Host Controller Interface is a standard by Intel for
	  accessing the USB hardware in the PC (which is also called the USB
	  host controller). If your USB host controller conforms to this
	  standard, you may want to say Y, but see below. All recent boards
	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
	  i810, i820) conform to this standard. Also all VIA PCI chipsets
	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
527 528
	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
	  If unsure, say Y.
L
Linus Torvalds 已提交
529 530 531 532

	  To compile this driver as a module, choose M here: the
	  module will be called uhci-hcd.

533 534
config USB_UHCI_SUPPORT_NON_PCI_HC
	bool
535
	default y if (SPARC_LEON || USB_UHCI_PLATFORM)
536 537

config USB_UHCI_PLATFORM
538
	bool
539
	default y if ARCH_VT8500
540

541
config USB_UHCI_BIG_ENDIAN_MMIO
542
	bool
543
	default y if SPARC_LEON
544 545

config USB_UHCI_BIG_ENDIAN_DESC
546
	bool
547
	default y if SPARC_LEON
548

549 550
config USB_FHCI_HCD
	tristate "Freescale QE USB Host Controller support"
551
	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
552 553 554 555 556 557 558 559 560 561 562 563
	select FSL_GTM
	select QE_USB
	help
	  This driver enables support for Freescale QE USB Host Controller
	  (as found on MPC8360 and MPC8323 processors), the driver supports
	  Full and Low Speed USB.

config FHCI_DEBUG
	bool "Freescale QE USB Host Controller debug support"
	depends on USB_FHCI_HCD && DEBUG_FS
	help
	  Say "y" to see some FHCI debug information and statistics
L
Lucas De Marchi 已提交
564
	  through debugfs.
565

566 567
config USB_U132_HCD
	tristate "Elan U132 Adapter Host Controller"
568
	depends on USB_FTDI_ELAN
569 570 571 572 573 574 575 576
	default M
	help
	  The U132 adapter is a USB to CardBus adapter specifically designed
	  for PC cards that contain an OHCI host controller. Typical PC cards
	  are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
	  adapter will *NOT* work with PC cards that do not contain an OHCI
	  controller.

M
Matt LaPlante 已提交
577
	  For those PC cards that contain multiple OHCI controllers only the
578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593
	  first one is used.

	  The driver consists of two modules, the "ftdi-elan" module is a
	  USB client driver that interfaces to the FTDI chip within ELAN's
	  USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
	  controller driver that talks to the OHCI controller within the
	  CardBus cards that are inserted in the U132 adapter.

	  This driver has been tested with a CardBus OHCI USB adapter, and
	  worked with a USB PEN Drive inserted into the first USB port of
	  the PCCARD. A rather pointless thing to do, but useful for testing.

	  It is safe to say M here.

	  See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>

L
Linus Torvalds 已提交
594 595 596 597 598 599 600 601 602 603 604
config USB_SL811_HCD
	tristate "SL811HS HCD support"
	help
	  The SL811HS is a single-port USB controller that supports either
	  host side or peripheral side roles.  Enable this option if your
	  board has this chip, and you want to use it as a host controller. 
	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called sl811-hcd.

605 606 607 608 609 610 611 612 613 614
config USB_SL811_HCD_ISO
	bool "partial ISO support"
	depends on USB_SL811_HCD
	help
	  The driver doesn't support iso_frame_desc (yet), but for some simple
	  devices that just queue one ISO frame per URB, then ISO transfers
	  "should" work using the normal urb status fields.

	  If unsure, say N.

615 616 617 618 619 620 621 622 623 624
config USB_SL811_CS
	tristate "CF/PCMCIA support for SL811HS HCD"
	depends on USB_SL811_HCD && PCMCIA
	help
	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called "sl811_cs".

625
config USB_R8A66597_HCD
M
M4rkusXXL 已提交
626
	tristate "R8A66597 HCD support"
627 628 629 630 631 632 633 634 635
	help
	  The R8A66597 is a USB 2.0 host and peripheral controller.

	  Enable this option if your board has this chip, and you want
	  to use it as a host controller.  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called r8a66597-hcd.

636 637 638 639 640 641 642 643 644 645 646 647
config USB_RENESAS_USBHS_HCD
	tristate "Renesas USBHS HCD support"
	depends on USB_RENESAS_USBHS
	help
	  The Renesas USBHS is a USB 2.0 host and peripheral controller.

	  Enable this option if your board has this chip, and you want
	  to use it as a host controller.  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called renesas-usbhs.

D
David Vrabel 已提交
648
config USB_WHCI_HCD
649
	tristate "Wireless USB Host Controller Interface (WHCI) driver"
650
	depends on PCI && USB && UWB
D
David Vrabel 已提交
651 652 653 654 655 656 657 658
	select USB_WUSB
	select UWB_WHCI
	help
	  A driver for PCI-based Wireless USB Host Controllers that are
	  compliant with the WHCI specification.

	  To compile this driver a module, choose M here: the module
	  will be called "whci-hcd".
659 660

config USB_HWA_HCD
661
	tristate "Host Wire Adapter (HWA) driver"
662
	depends on UWB
663 664 665 666 667 668 669 670 671 672
	select USB_WUSB
	select UWB_HWA
	help
	  This driver enables you to connect Wireless USB devices to
	  your system using a Host Wire Adaptor USB dongle. This is an
	  UWB Radio Controller and WUSB Host Controller connected to
	  your machine via USB (specified in WUSB1.0).

	  To compile this driver a module, choose M here: the module
	  will be called "hwa-hc".
673 674

config USB_IMX21_HCD
675
       tristate "i.MX21 HCD support"
676
       depends on ARM && ARCH_MXC
677 678
       help
         This driver enables support for the on-chip USB host in the
679
         i.MX21 processor.
680 681 682 683

         To compile this driver as a module, choose M here: the
         module will be called "imx21-hcd".

684 685 686 687 688


config USB_OCTEON2_COMMON
	bool
	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
689 690 691

config USB_HCD_BCMA
	tristate "BCMA usb host driver"
692
	depends on BCMA
693 694 695
	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
	help
696
	  Enable support for the EHCI and OCHI host controller on an bcma bus.
697 698 699 700
	  It converts the bcma driver into two platform device drivers
	  for ehci and ohci.

	  If unsure, say N.
H
Hauke Mehrtens 已提交
701 702 703

config USB_HCD_SSB
	tristate "SSB usb host driver"
704
	depends on SSB
H
Hauke Mehrtens 已提交
705 706 707
	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
	help
708
	  Enable support for the EHCI and OCHI host controller on an bcma bus.
H
Hauke Mehrtens 已提交
709 710 711 712
	  It converts the bcma driver into two platform device drivers
	  for ehci and ohci.

	  If unsure, say N.