Kconfig 22.7 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6
#
# USB Host Controller Drivers
#
comment "USB Host Controller Drivers"
	depends on USB

7 8 9 10 11 12 13 14 15 16 17 18 19
config USB_C67X00_HCD
	tristate "Cypress C67x00 HCD support"
	depends on USB
	help
	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
	  host/peripheral/OTG USB controllers.

	  Enable this option to support this chip in host controller mode.
	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called c67x00.

20
config USB_XHCI_HCD
21 22
	tristate "xHCI HCD (USB 3.0) support"
	depends on USB && USB_ARCH_HAS_XHCI
23 24 25 26 27 28 29
	---help---
	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
	  "SuperSpeed" host controller hardware.

	  To compile this driver as a module, choose M here: the
	  module will be called xhci-hcd.

30 31 32 33
config USB_XHCI_PLATFORM
	tristate
	depends on USB_XHCI_HCD

34 35 36 37 38 39 40 41 42 43
config USB_XHCI_HCD_DEBUGGING
	bool "Debugging for the xHCI host controller"
	depends on USB_XHCI_HCD
	---help---
	  Say 'Y' to turn on debugging for the xHCI host controller driver.
	  This will spew debugging output, even in interrupt context.
	  This should only be used for debugging xHCI driver bugs.

	  If unsure, say N.

L
Linus Torvalds 已提交
44 45
config USB_EHCI_HCD
	tristate "EHCI HCD (USB 2.0) support"
J
Jordan Crouse 已提交
46
	depends on USB && USB_ARCH_HAS_EHCI
L
Linus Torvalds 已提交
47 48 49 50
	---help---
	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
	  If your USB host controller supports USB 2.0, you will likely want to
51
	  configure this Host Controller Driver.
L
Linus Torvalds 已提交
52 53 54

	  EHCI controllers are packaged with "companion" host controllers (OHCI
	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
55
	  will connect to EHCI if the device is high speed, otherwise they
L
Linus Torvalds 已提交
56 57 58 59 60 61 62 63 64 65 66
	  connect to a companion controller.  If you configure EHCI, you should
	  probably configure the OHCI (for NEC and some other vendors) USB Host
	  Controller Driver or UHCI (for Via motherboards) Host Controller
	  Driver too.

	  You may want to read <file:Documentation/usb/ehci.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called ehci-hcd.

config USB_EHCI_ROOT_HUB_TT
67
	bool "Root Hub Transaction Translators"
68
	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
L
Linus Torvalds 已提交
69 70 71 72 73 74
	---help---
	  Some EHCI chips have vendor-specific extensions to integrate
	  transaction translators, so that no OHCI or UHCI companion
	  controller is needed.  It's safe to say "y" even if your
	  controller doesn't support this feature.

75 76 77 78
	  This supports the EHCI implementation that's originally
	  from ARC, and has since changed hands a few times.

config USB_EHCI_TT_NEWSCHED
79
	bool "Improved Transaction Translator scheduling"
80
	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
81
	default y
82 83 84 85 86 87 88 89 90 91
	---help---
	  This changes the periodic scheduling code to fill more of the low
	  and full speed bandwidth available from the Transaction Translator
	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
	  issued in each microframe, significantly reducing the number of
	  periodic low/fullspeed transfers possible.

	  If you have multiple periodic low/fullspeed devices connected to a
	  highspeed USB hub which is connected to a highspeed USB Host
	  Controller, and some of those devices will not work correctly
92 93 94
	  (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
	  you have only one such device and it doesn't work, you could try
	  saying N.
95

96
	  If unsure, say Y.
L
Linus Torvalds 已提交
97

98 99 100 101 102
config USB_EHCI_PCI
	tristate
	depends on USB_EHCI_HCD && PCI
	default y

103 104 105 106 107 108 109 110 111 112
config USB_EHCI_HCD_PMC_MSP
	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
	depends on USB_EHCI_HCD && MSP_HAS_USB
	default n
	select USB_EHCI_BIG_ENDIAN_DESC
	select USB_EHCI_BIG_ENDIAN_MMIO
	---help---
		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
		If unsure, say N.

113 114
config USB_EHCI_BIG_ENDIAN_MMIO
	bool
115 116
	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
117
				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
118
				    PMC_MSP || SPARC_LEON || MIPS_SEAD3)
119
	default y
120

121 122
config USB_EHCI_BIG_ENDIAN_DESC
	bool
123
	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
124 125
				    PPC_MPC512x || PMC_MSP || SPARC_LEON || \
				    MIPS_SEAD3)
126
	default y
127

128 129 130 131 132 133 134 135 136 137 138
config XPS_USB_HCD_XILINX
	bool "Use Xilinx usb host EHCI controller core"
	depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE)
	select USB_EHCI_BIG_ENDIAN_DESC
	select USB_EHCI_BIG_ENDIAN_MMIO
	---help---
		Xilinx xps USB host controller core is EHCI compilant and has
		transaction translator built-in. It can be configured to either
		support both high speed and full speed devices, or high speed
		devices only.

139 140 141
config USB_FSL_MPH_DR_OF
	tristate

142
config USB_EHCI_FSL
143
	bool "Support for Freescale PPC on-chip EHCI USB controller"
144
	depends on USB_EHCI_HCD && FSL_SOC
145
	select USB_EHCI_ROOT_HUB_TT
146
	select USB_FSL_MPH_DR_OF if OF
147 148 149 150
	---help---
	  Variation of ARC USB block used in some Freescale chips.

config USB_EHCI_MXC
151
	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
152 153
	depends on USB_EHCI_HCD && ARCH_MXC
	select USB_EHCI_ROOT_HUB_TT
154 155 156
	---help---
	  Variation of ARC USB block used in some Freescale chips.

157
config USB_EHCI_HCD_OMAP
158
	tristate "EHCI support for OMAP3 and later chips"
159
	depends on USB_EHCI_HCD && ARCH_OMAP
160
	select NOP_USB_XCEIV
161
	default y
162
	---help---
163 164 165
	  Enables support for the on-chip EHCI controller on
	  OMAP3 and later chips.

166 167 168 169 170 171 172 173 174 175 176
config USB_EHCI_HCD_ORION
	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
	depends on USB_EHCI_HCD && PLAT_ORION
	default y
	---help---
	  Enables support for the on-chip EHCI controller on Marvell's
	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
	  Armada 370.  This is different from the EHCI implementation
	  on Marvell's mobile PXA and MMP SoC, see "EHCI support for
	  Marvell PXA/MMP USB controller" for those.

177 178 179 180 181 182 183 184
config USB_EHCI_HCD_SPEAR
        tristate "Support for ST SPEAr on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && PLAT_SPEAR
        default y
        ---help---
          Enables support for the on-chip EHCI controller on
          ST SPEAr chips.

185
config USB_EHCI_MSM
186
	bool "Support for MSM on-chip EHCI USB controller"
187 188
	depends on USB_EHCI_HCD && ARCH_MSM
	select USB_EHCI_ROOT_HUB_TT
189
	select USB_MSM_OTG
190 191 192 193
	---help---
	  Enables support for the USB Host controller present on the
	  Qualcomm chipsets. Root Hub has inbuilt TT.
	  This driver depends on OTG driver for PHY initialization,
194
	  clock management, powering up VBUS, and power management.
195 196
	  This driver is not supported on boards like trout which
	  has an external PHY.
197

198 199 200 201
config USB_EHCI_TEGRA
       boolean "NVIDIA Tegra HCD support"
       depends on USB_EHCI_HCD && ARCH_TEGRA
       select USB_EHCI_ROOT_HUB_TT
202
       select USB_PHY
203 204 205 206
       help
         This driver enables support for the internal USB Host Controllers
         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.

207 208 209 210 211 212 213 214
config USB_EHCI_HCD_PPC_OF
	bool "EHCI support for PPC USB controller on OF platform bus"
	depends on USB_EHCI_HCD && PPC_OF
	default y
	---help---
	  Enables support for the USB controller present on the PowerPC
	  OpenFirmware platform bus.

215 216 217 218 219 220 221
config USB_EHCI_SH
	bool "EHCI support for SuperH USB controller"
	depends on USB_EHCI_HCD && SUPERH
	---help---
	  Enables support for the on-chip EHCI controller on the SuperH.
	  If you use the PCI EHCI controller, this option is not necessary.

222
config USB_EHCI_S5P
223 224 225 226
       boolean "S5P EHCI support"
       depends on USB_EHCI_HCD && PLAT_S5P
       help
	 Enable support for the S5P SOC's on-chip EHCI controller.
227

228
config USB_EHCI_MV
229
	bool "EHCI support for Marvell PXA/MMP USB controller"
230
	depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
231 232 233 234 235
	select USB_EHCI_ROOT_HUB_TT
	---help---
	  Enables support for Marvell (including PXA and MMP series) on-chip
	  USB SPH and OTG controller. SPH is a single port host, and it can
	  only be EHCI host. OTG is controller that can switch to host mode.
236 237 238 239
	  Note that this driver will not work on Marvell's other EHCI
	  controller used by the EBU-type SoCs including Orion, Kirkwood,
	  Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
	  on-chip EHCI USB controller" for those.
240

241 242 243 244 245 246
config USB_W90X900_EHCI
	bool "W90X900(W90P910) EHCI support"
	depends on USB_EHCI_HCD && ARCH_W90X900
	---help---
		Enables support for the W90X900 USB controller

247
config USB_CNS3XXX_EHCI
248
	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
249
	depends on USB_EHCI_HCD && ARCH_CNS3XXX
250
	select USB_EHCI_HCD_PLATFORM
251
	---help---
252 253 254
	  This option is deprecated now and the driver was removed, use
	  USB_EHCI_HCD_PLATFORM instead.

255 256 257 258
	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
	  support.

259
config USB_EHCI_ATH79
260
	bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
261
	depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
262
	select USB_EHCI_ROOT_HUB_TT
263
	select USB_EHCI_HCD_PLATFORM
264 265
	default y
	---help---
266 267 268
	  This option is deprecated now and the driver was removed, use
	  USB_EHCI_HCD_PLATFORM instead.

269 270 271
	  Enables support for the built-in EHCI controller present
	  on the Atheros AR7XXX/AR9XXX SoCs.

272 273
config USB_OXU210HP_HCD
	tristate "OXU210HP HCD support"
274
	depends on USB && GENERIC_HARDIRQS
275 276 277 278 279 280 281 282 283 284
	---help---
	  The OXU210HP is an USB host/OTG/device controller. Enable this
	  option if your board has this chip. If unsure, say N.

	  This driver does not support isochronous transfers and doesn't
	  implement OTG nor USB device controllers.

	  To compile this driver as a module, choose M here: the
	  module will be called oxu210hp-hcd.

285 286 287 288 289 290 291 292 293 294 295 296
config USB_ISP116X_HCD
	tristate "ISP116X HCD support"
	depends on USB
	---help---
	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
	  option if your board has this chip. If unsure, say N.

	  This driver does not support isochronous transfers.

	  To compile this driver as a module, choose M here: the
	  module will be called isp116x-hcd.

S
Sebastian Siewior 已提交
297 298
config USB_ISP1760_HCD
	tristate "ISP 1760 HCD support"
299
	depends on USB
S
Sebastian Siewior 已提交
300 301 302 303
	---help---
	  The ISP1760 chip is a USB 2.0 host controller.

	  This driver does not support isochronous transfers or OTG.
304 305 306 307
	  This USB controller is usually attached to a non-DMA-Master
	  capable bus. NXP's eval kit brings this chip on PCI card
	  where the chip itself is behind a PLB to simulate such
	  a bus.
S
Sebastian Siewior 已提交
308 309

	  To compile this driver as a module, choose M here: the
310
	  module will be called isp1760.
S
Sebastian Siewior 已提交
311

312 313 314 315 316 317 318 319 320 321 322 323
config USB_ISP1362_HCD
	tristate "ISP1362 HCD support"
	depends on USB
	default N
	---help---
	  Supports the Philips ISP1362 chip as a host controller

	  This driver does not support isochronous transfers.

	  To compile this driver as a module, choose M here: the
	  module will be called isp1362-hcd.

L
Linus Torvalds 已提交
324 325 326 327
config USB_OHCI_HCD
	tristate "OHCI HCD support"
	depends on USB && USB_ARCH_HAS_OHCI
	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
328
	depends on USB_ISP1301 || !ARCH_LPC32XX
L
Linus Torvalds 已提交
329 330 331 332 333 334 335 336 337 338 339 340 341
	---help---
	  The Open Host Controller Interface (OHCI) is a standard for accessing
	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
	  UHCI specification.  If your USB host controller follows the OHCI spec,
	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
	  USB controller from Intel or VIA, this is appropriate.  If your host
	  controller doesn't use PCI, this is probably appropriate.  For a PCI
	  based system where you're not sure, the "lspci -v" entry will list the
	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.

	  To compile this driver as a module, choose M here: the
	  module will be called ohci-hcd.

342 343
config USB_OHCI_HCD_OMAP1
	bool "OHCI support for OMAP1/2 chips"
344
	depends on USB_OHCI_HCD && ARCH_OMAP1
345 346 347 348 349 350 351 352 353 354 355 356
	default y
	---help---
	  Enables support for the OHCI controller on OMAP1/2 chips.

config USB_OHCI_HCD_OMAP3
	bool "OHCI support for OMAP3 and later chips"
	depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
	default y
	---help---
	  Enables support for the on-chip OHCI controller on
	  OMAP3 and later chips.

357
config USB_OHCI_ATH79
358
	bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
359
	depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
360
	select USB_OHCI_HCD_PLATFORM
361 362
	default y
	help
363 364 365
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

366 367 368
	  Enables support for the built-in OHCI controller present on the
	  Atheros AR71XX/AR7240 SoCs.

369
config USB_OHCI_HCD_PPC_OF_BE
A
Arnd Bergmann 已提交
370 371
	bool "OHCI support for OF platform bus (big endian)"
	depends on USB_OHCI_HCD && PPC_OF
372 373
	select USB_OHCI_BIG_ENDIAN_DESC
	select USB_OHCI_BIG_ENDIAN_MMIO
A
Arnd Bergmann 已提交
374 375 376
	---help---
	  Enables support for big-endian USB controllers present on the
	  OpenFirmware platform bus.
377 378

config USB_OHCI_HCD_PPC_OF_LE
A
Arnd Bergmann 已提交
379 380
	bool "OHCI support for OF platform bus (little endian)"
	depends on USB_OHCI_HCD && PPC_OF
381
	select USB_OHCI_LITTLE_ENDIAN
A
Arnd Bergmann 已提交
382 383 384 385 386 387 388 389
	---help---
	  Enables support for little-endian USB controllers present on the
	  OpenFirmware platform bus.

config USB_OHCI_HCD_PPC_OF
	bool
	depends on USB_OHCI_HCD && PPC_OF
	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
390

L
Linus Torvalds 已提交
391 392
config USB_OHCI_HCD_PCI
	bool "OHCI support for PCI-bus USB controllers"
393
	depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
L
Linus Torvalds 已提交
394 395 396 397 398 399
	default y
	select USB_OHCI_LITTLE_ENDIAN
	---help---
	  Enables support for PCI-bus plug-in USB controller cards.
	  If unsure, say Y.

M
Michael Buesch 已提交
400
config USB_OHCI_HCD_SSB
401
	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
402
	depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD)
403 404
	select USB_HCD_SSB
	select USB_OHCI_HCD_PLATFORM
M
Michael Buesch 已提交
405 406
	default n
	---help---
407 408 409
	  This option is deprecated now and the driver was removed, use
	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.

M
Michael Buesch 已提交
410 411 412 413 414 415 416 417
	  Support for the Sonics Silicon Backplane (SSB) attached
	  Broadcom USB OHCI core.

	  This device is present in some embedded devices with
	  Broadcom based SSB bus.

	  If unsure, say N.

418
config USB_OHCI_SH
419
	bool "OHCI support for SuperH USB controller (DEPRECATED)"
420
	depends on USB_OHCI_HCD && SUPERH
421
	select USB_OHCI_HCD_PLATFORM
422
	---help---
423 424 425
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

426 427 428
	  Enables support for the on-chip OHCI controller on the SuperH.
	  If you use the PCI OHCI controller, this option is not necessary.

J
Jingoo Han 已提交
429 430 431 432 433 434
config USB_OHCI_EXYNOS
	boolean "OHCI support for Samsung EXYNOS SoC Series"
	depends on USB_OHCI_HCD && ARCH_EXYNOS
	help
	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.

435
config USB_CNS3XXX_OHCI
436
	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
437
	depends on USB_OHCI_HCD && ARCH_CNS3XXX
438
	select USB_OHCI_HCD_PLATFORM
439
	---help---
440 441 442
	  This option is deprecated now and the driver was removed, use
	  USB_OHCI_HCD_PLATFORM instead.

443 444 445
	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
	  It is needed for low-speed USB 1.0 device support.

446 447
config USB_OHCI_HCD_PLATFORM
	bool "Generic OHCI driver for a platform device"
448
	depends on USB_OHCI_HCD
449 450 451
	default n
	---help---
	  Adds an OHCI host driver for a generic platform device, which
452
	  provides a memory space and an irq.
453 454 455

	  If unsure, say N.

456
config USB_EHCI_HCD_PLATFORM
457
	tristate "Generic EHCI driver for a platform device"
458
	depends on USB_EHCI_HCD
459 460 461
	default n
	---help---
	  Adds an EHCI host driver for a generic platform device, which
462
	  provides a memory space and an irq.
463 464 465

	  If unsure, say N.

466 467 468 469 470 471
config USB_OHCI_BIG_ENDIAN_DESC
	bool
	depends on USB_OHCI_HCD
	default n

config USB_OHCI_BIG_ENDIAN_MMIO
L
Linus Torvalds 已提交
472 473 474 475 476 477 478 479 480 481 482 483
	bool
	depends on USB_OHCI_HCD
	default n

config USB_OHCI_LITTLE_ENDIAN
	bool
	depends on USB_OHCI_HCD
	default n if STB03xxx || PPC_MPC52xx
	default y

config USB_UHCI_HCD
	tristate "UHCI HCD (most Intel and VIA) support"
484
	depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
L
Linus Torvalds 已提交
485 486 487 488 489 490 491 492
	---help---
	  The Universal Host Controller Interface is a standard by Intel for
	  accessing the USB hardware in the PC (which is also called the USB
	  host controller). If your USB host controller conforms to this
	  standard, you may want to say Y, but see below. All recent boards
	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
	  i810, i820) conform to this standard. Also all VIA PCI chipsets
	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
493 494
	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
	  If unsure, say Y.
L
Linus Torvalds 已提交
495 496 497 498

	  To compile this driver as a module, choose M here: the
	  module will be called uhci-hcd.

499 500 501
config USB_UHCI_SUPPORT_NON_PCI_HC
	bool
	depends on USB_UHCI_HCD
502 503 504 505 506 507 508 509 510
	default y if (SPARC_LEON || ARCH_VT8500)

config USB_UHCI_PLATFORM
	bool "Generic UHCI Platform Driver support"
	depends on USB_UHCI_SUPPORT_NON_PCI_HC
	default y if ARCH_VT8500
	---help---
	  Enable support for generic UHCI platform devices that require no
	  additional configuration.
511

512
config USB_UHCI_BIG_ENDIAN_MMIO
513
	bool
514 515
	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
	default y
516 517

config USB_UHCI_BIG_ENDIAN_DESC
518
	bool
519 520
	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
	default y
521

522 523 524 525 526 527 528 529 530 531 532 533 534 535 536
config USB_FHCI_HCD
	tristate "Freescale QE USB Host Controller support"
	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
	select FSL_GTM
	select QE_USB
	help
	  This driver enables support for Freescale QE USB Host Controller
	  (as found on MPC8360 and MPC8323 processors), the driver supports
	  Full and Low Speed USB.

config FHCI_DEBUG
	bool "Freescale QE USB Host Controller debug support"
	depends on USB_FHCI_HCD && DEBUG_FS
	help
	  Say "y" to see some FHCI debug information and statistics
L
Lucas De Marchi 已提交
537
	  through debugfs.
538

539 540 541 542 543 544 545 546 547 548 549
config USB_U132_HCD
	tristate "Elan U132 Adapter Host Controller"
	depends on USB && USB_FTDI_ELAN
	default M
	help
	  The U132 adapter is a USB to CardBus adapter specifically designed
	  for PC cards that contain an OHCI host controller. Typical PC cards
	  are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
	  adapter will *NOT* work with PC cards that do not contain an OHCI
	  controller.

M
Matt LaPlante 已提交
550
	  For those PC cards that contain multiple OHCI controllers only the
551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566
	  first one is used.

	  The driver consists of two modules, the "ftdi-elan" module is a
	  USB client driver that interfaces to the FTDI chip within ELAN's
	  USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
	  controller driver that talks to the OHCI controller within the
	  CardBus cards that are inserted in the U132 adapter.

	  This driver has been tested with a CardBus OHCI USB adapter, and
	  worked with a USB PEN Drive inserted into the first USB port of
	  the PCCARD. A rather pointless thing to do, but useful for testing.

	  It is safe to say M here.

	  See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>

L
Linus Torvalds 已提交
567 568 569 570 571 572 573 574 575 576 577 578
config USB_SL811_HCD
	tristate "SL811HS HCD support"
	depends on USB
	help
	  The SL811HS is a single-port USB controller that supports either
	  host side or peripheral side roles.  Enable this option if your
	  board has this chip, and you want to use it as a host controller. 
	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called sl811-hcd.

579 580 581 582 583 584 585 586 587 588
config USB_SL811_HCD_ISO
	bool "partial ISO support"
	depends on USB_SL811_HCD
	help
	  The driver doesn't support iso_frame_desc (yet), but for some simple
	  devices that just queue one ISO frame per URB, then ISO transfers
	  "should" work using the normal urb status fields.

	  If unsure, say N.

589 590 591 592 593 594 595 596 597 598
config USB_SL811_CS
	tristate "CF/PCMCIA support for SL811HS HCD"
	depends on USB_SL811_HCD && PCMCIA
	help
	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called "sl811_cs".

599
config USB_R8A66597_HCD
M
M4rkusXXL 已提交
600
	tristate "R8A66597 HCD support"
601 602 603 604 605 606 607 608 609 610
	depends on USB
	help
	  The R8A66597 is a USB 2.0 host and peripheral controller.

	  Enable this option if your board has this chip, and you want
	  to use it as a host controller.  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called r8a66597-hcd.

611 612 613 614 615 616 617 618 619 620 621 622 623
config USB_RENESAS_USBHS_HCD
	tristate "Renesas USBHS HCD support"
	depends on USB
	depends on USB_RENESAS_USBHS
	help
	  The Renesas USBHS is a USB 2.0 host and peripheral controller.

	  Enable this option if your board has this chip, and you want
	  to use it as a host controller.  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called renesas-usbhs.

D
David Vrabel 已提交
624
config USB_WHCI_HCD
625
	tristate "Wireless USB Host Controller Interface (WHCI) driver"
626
	depends on PCI && USB && UWB
D
David Vrabel 已提交
627 628 629 630 631 632 633 634
	select USB_WUSB
	select UWB_WHCI
	help
	  A driver for PCI-based Wireless USB Host Controllers that are
	  compliant with the WHCI specification.

	  To compile this driver a module, choose M here: the module
	  will be called "whci-hcd".
635 636

config USB_HWA_HCD
637
	tristate "Host Wire Adapter (HWA) driver"
638
	depends on USB && UWB
639 640 641 642 643 644 645 646 647 648
	select USB_WUSB
	select UWB_HWA
	help
	  This driver enables you to connect Wireless USB devices to
	  your system using a Host Wire Adaptor USB dongle. This is an
	  UWB Radio Controller and WUSB Host Controller connected to
	  your machine via USB (specified in WUSB1.0).

	  To compile this driver a module, choose M here: the module
	  will be called "hwa-hc".
649 650

config USB_IMX21_HCD
651 652
       tristate "i.MX21 HCD support"
       depends on USB && ARM && ARCH_MXC
653 654
       help
         This driver enables support for the on-chip USB host in the
655
         i.MX21 processor.
656 657 658 659

         To compile this driver as a module, choose M here: the
         module will be called "imx21-hcd".

660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684
config USB_OCTEON_EHCI
	bool "Octeon on-chip EHCI support"
	depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
	default n
	select USB_EHCI_BIG_ENDIAN_MMIO
	help
	  Enable support for the Octeon II SOC's on-chip EHCI
	  controller.  It is needed for high-speed (480Mbit/sec)
	  USB 2.0 device support.  All CN6XXX based chips with USB are
	  supported.

config USB_OCTEON_OHCI
	bool "Octeon on-chip OHCI support"
	depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
	default USB_OCTEON_EHCI
	select USB_OHCI_BIG_ENDIAN_MMIO
	select USB_OHCI_LITTLE_ENDIAN
	help
	  Enable support for the Octeon II SOC's on-chip OHCI
	  controller.  It is needed for low-speed USB 1.0 device
	  support.  All CN6XXX based chips with USB are supported.

config USB_OCTEON2_COMMON
	bool
	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
685 686 687

config USB_HCD_BCMA
	tristate "BCMA usb host driver"
688
	depends on BCMA
689 690 691
	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
	help
692
	  Enable support for the EHCI and OCHI host controller on an bcma bus.
693 694 695 696
	  It converts the bcma driver into two platform device drivers
	  for ehci and ohci.

	  If unsure, say N.
H
Hauke Mehrtens 已提交
697 698 699

config USB_HCD_SSB
	tristate "SSB usb host driver"
700
	depends on SSB
H
Hauke Mehrtens 已提交
701 702 703
	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
	help
704
	  Enable support for the EHCI and OCHI host controller on an bcma bus.
H
Hauke Mehrtens 已提交
705 706 707 708
	  It converts the bcma driver into two platform device drivers
	  for ehci and ohci.

	  If unsure, say N.