Kconfig 51.4 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3
config MIPS
	bool
	default y
4
	select HAVE_GENERIC_DMA_COHERENT
S
Sam Ravnborg 已提交
5
	select HAVE_IDE
M
Mathieu Desnoyers 已提交
6
	select HAVE_OPROFILE
7
	select HAVE_ARCH_KGDB
8
	select HAVE_FUNCTION_TRACER
9
	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
10 11
	select HAVE_DYNAMIC_FTRACE
	select HAVE_FTRACE_MCOUNT_RECORD
12
	select HAVE_FUNCTION_GRAPH_TRACER
13
	select RTC_LIB if !MACH_LOONGSON
L
Linus Torvalds 已提交
14

15 16
mainmenu "Linux/MIPS Kernel Configuration"

L
Linus Torvalds 已提交
17 18
menu "Machine selection"

19 20 21
config ZONE_DMA
	bool

22 23 24
choice
	prompt "System type"
	default SGI_IP22
L
Linus Torvalds 已提交
25

26 27
config MACH_ALCHEMY
	bool "Alchemy processor based machines"
28
	select SYS_SUPPORTS_ZBOOT
L
Linus Torvalds 已提交
29

30 31 32 33 34 35 36 37 38 39 40 41 42
config AR7
	bool "Texas Instruments AR7"
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select CEVT_R4K
	select CSRC_R4K
	select IRQ_CPU
	select NO_EXCEPT_FILL
	select SWAP_IO_SPACE
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_HAS_EARLY_PRINTK
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_LITTLE_ENDIAN
43
	select SYS_SUPPORTS_ZBOOT_UART16550
F
Florian Fainelli 已提交
44
	select ARCH_REQUIRE_GPIOLIB
45 46 47 48 49 50
	select GCD
	select VLYNQ
	help
	  Support for the Texas Instruments AR7 System-on-a-Chip
	  family: TNETD7100, 7200 and 7300.

51 52
config BCM47XX
	bool "BCM47XX based boards"
53
	select CEVT_R4K
54
	select CSRC_R4K
55 56 57 58 59 60 61 62
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_LITTLE_ENDIAN
	select SSB
	select SSB_DRIVER_MIPS
63
	select SSB_DRIVER_EXTIF
64
	select SSB_EMBEDDED
65
	select SSB_PCICORE_HOSTMODE if PCI
66
	select GENERIC_GPIO
A
Aurelien Jarno 已提交
67 68
	select SYS_HAS_EARLY_PRINTK
	select CFE
69 70 71
	help
	 Support for BCM47XX based boards

72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
config BCM63XX
	bool "Broadcom BCM63XX based boards"
	select CEVT_R4K
	select CSRC_R4K
	select DMA_NONCOHERENT
	select IRQ_CPU
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_HAS_EARLY_PRINTK
	select SWAP_IO_SPACE
	select ARCH_REQUIRE_GPIOLIB
	help
	 Support for BCM63XX based boards

L
Linus Torvalds 已提交
87
config MIPS_COBALT
88
	bool "Cobalt Server"
89
	select CEVT_R4K
90
	select CSRC_R4K
91
	select CEVT_GT641XX
L
Linus Torvalds 已提交
92 93
	select DMA_NONCOHERENT
	select HW_HAS_PCI
94
	select I8253
L
Linus Torvalds 已提交
95 96
	select I8259
	select IRQ_CPU
Y
Yoichi Yuasa 已提交
97
	select IRQ_GT641XX
98
	select PCI_GT64XXX_PCI0
99
	select PCI
100
	select SYS_HAS_CPU_NEVADA
Y
Yoichi Yuasa 已提交
101
	select SYS_HAS_EARLY_PRINTK
102
	select SYS_SUPPORTS_32BIT_KERNEL
103
	select SYS_SUPPORTS_64BIT_KERNEL
104
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
105 106

config MACH_DECSTATION
107
	bool "DECstations"
L
Linus Torvalds 已提交
108
	select BOOT_ELF32
109
	select CEVT_DS1287
110
	select CEVT_R4K
111
	select CSRC_IOASIC
112
	select CSRC_R4K
113 114 115
	select CPU_DADDI_WORKAROUNDS if 64BIT
	select CPU_R4000_WORKAROUNDS if 64BIT
	select CPU_R4400_WORKAROUNDS if 64BIT
L
Linus Torvalds 已提交
116
	select DMA_NONCOHERENT
117
	select NO_IOPORT
L
Linus Torvalds 已提交
118
	select IRQ_CPU
119 120
	select SYS_HAS_CPU_R3000
	select SYS_HAS_CPU_R4X00
121 122
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
123
	select SYS_SUPPORTS_LITTLE_ENDIAN
124 125 126
	select SYS_SUPPORTS_128HZ
	select SYS_SUPPORTS_256HZ
	select SYS_SUPPORTS_1024HZ
127
	help
L
Linus Torvalds 已提交
128 129 130 131 132 133 134
	  This enables support for DEC's MIPS based workstations.  For details
	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
	  DECstation porting pages on <http://decstation.unix-ag.org/>.

	  If you have one of the following DECstation Models you definitely
	  want to choose R4xx0 for the CPU Type:

135 136 137 138
		DECstation 5000/50
		DECstation 5000/150
		DECstation 5000/260
		DECsystem 5900/260
L
Linus Torvalds 已提交
139 140 141

	  otherwise choose R3000.

142
config MACH_JAZZ
143
	bool "Jazz family of machines"
144 145 146
	select ARC
	select ARC32
	select ARCH_MAY_HAVE_PC_FDC
147
	select CEVT_R4K
148
	select CSRC_R4K
T
Thomas Bogendoerfer 已提交
149
	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
150
	select GENERIC_ISA_DMA
T
Thomas Bogendoerfer 已提交
151
	select IRQ_CPU
152
	select I8253
153 154
	select I8259
	select ISA
155
	select SYS_HAS_CPU_R4X00
156 157
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
158
	select SYS_SUPPORTS_100HZ
L
Linus Torvalds 已提交
159
	help
160 161
	 This a family of machines based on the MIPS R4030 chipset which was
	 used by several vendors to build RISC/os and Windows NT workstations.
162
	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
163 164
	 Olivetti M700-10 workstations.

165 166
config LASAT
	bool "LASAT Networks platforms"
167
	select CEVT_R4K
168
	select CSRC_R4K
169 170 171
	select DMA_NONCOHERENT
	select SYS_HAS_EARLY_PRINTK
	select HW_HAS_PCI
172
	select IRQ_CPU
173 174 175 176 177 178 179 180
	select PCI_GT64XXX_PCI0
	select MIPS_NILE4
	select R5000_CPU_SCACHE
	select SYS_HAS_CPU_R5000
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
	select SYS_SUPPORTS_LITTLE_ENDIAN

181 182
config MACH_LOONGSON
	bool "Loongson family of machines"
183
	select SYS_SUPPORTS_ZBOOT
184
	help
185 186 187 188 189 190
	  This enables the support of Loongson family of machines.

	  Loongson is a family of general-purpose MIPS-compatible CPUs.
	  developed at Institute of Computing Technology (ICT),
	  Chinese Academy of Sciences (CAS) in the People's Republic
	  of China. The chief architect is Professor Weiwu Hu.
191

L
Linus Torvalds 已提交
192
config MIPS_MALTA
193
	bool "MIPS Malta board"
194
	select ARCH_MAY_HAVE_PC_FDC
L
Linus Torvalds 已提交
195
	select BOOT_ELF32
196
	select BOOT_RAW
197
	select CEVT_R4K
198
	select CSRC_R4K
L
Linus Torvalds 已提交
199 200
	select DMA_NONCOHERENT
	select GENERIC_ISA_DMA
201
	select IRQ_CPU
202
	select IRQ_GIC
L
Linus Torvalds 已提交
203
	select HW_HAS_PCI
204
	select I8253
L
Linus Torvalds 已提交
205
	select I8259
206 207
	select MIPS_BOARDS_GEN
	select MIPS_BONITO64
208
	select MIPS_CPU_SCACHE
209
	select PCI_GT64XXX_PCI0
210
	select MIPS_MSC
L
Linus Torvalds 已提交
211
	select SWAP_IO_SPACE
212 213 214 215 216
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_HAS_CPU_MIPS32_R2
	select SYS_HAS_CPU_MIPS64_R1
	select SYS_HAS_CPU_NEVADA
	select SYS_HAS_CPU_RM7000
217
	select SYS_HAS_EARLY_PRINTK
218 219
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL
220 221
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_LITTLE_ENDIAN
T
Tim Anderson 已提交
222
	select SYS_SUPPORTS_MIPS_CMP
223
	select SYS_SUPPORTS_MULTITHREADING
224
	select SYS_SUPPORTS_SMARTMIPS
225
	select SYS_SUPPORTS_ZBOOT
L
Linus Torvalds 已提交
226
	help
227
	  This enables support for the MIPS Technologies Malta evaluation
L
Linus Torvalds 已提交
228 229
	  board.

230
config MIPS_SIM
231
	bool 'MIPS simulator (MIPSsim)'
232
	select CEVT_R4K
233
	select CSRC_R4K
L
Linus Torvalds 已提交
234
	select DMA_NONCOHERENT
235
	select SYS_HAS_EARLY_PRINTK
L
Linus Torvalds 已提交
236
	select IRQ_CPU
M
Marc St-Jean 已提交
237
	select BOOT_RAW
238 239
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_HAS_CPU_MIPS32_R2
240
	select SYS_HAS_EARLY_PRINTK
241
	select SYS_SUPPORTS_32BIT_KERNEL
242
	select SYS_SUPPORTS_BIG_ENDIAN
243
	select SYS_SUPPORTS_MULTITHREADING
244
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
245
	help
246 247
	  This option enables support for MIPS Technologies MIPSsim software
	  emulator.
L
Linus Torvalds 已提交
248

249 250 251 252 253 254
config NEC_MARKEINS
	bool "NEC EMMA2RH Mark-eins board"
	select SOC_EMMA2RH
	select HW_HAS_PCI
	help
	  This enables support for the NEC Electronics Mark-eins boards.
255

256
config MACH_VR41XX
257
	bool "NEC VR4100 series based machines"
258
	select CEVT_R4K
259
	select CSRC_R4K
260
	select SYS_HAS_CPU_VR41XX
261
	select ARCH_REQUIRE_GPIOLIB
262

263 264 265 266 267 268 269 270 271 272 273 274 275
config NXP_STB220
	bool "NXP STB220 board"
	select SOC_PNX833X
	help
	 Support for NXP Semiconductors STB220 Development Board.

config NXP_STB225
	bool "NXP 225 board"
	select SOC_PNX833X
	select SOC_PNX8335
	help
	 Support for NXP Semiconductors STB225 Development Board.

276
config PNX8550_JBS
277
	bool "NXP PNX8550 based JBS board"
278 279 280 281
	select PNX8550
	select SYS_SUPPORTS_LITTLE_ENDIAN

config PNX8550_STB810
282
	bool "NXP PNX8550 based STB810 board"
283 284 285
	select PNX8550
	select SYS_SUPPORTS_LITTLE_ENDIAN

M
Marc St-Jean 已提交
286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305
config PMC_MSP
	bool "PMC-Sierra MSP chipsets"
	depends on EXPERIMENTAL
	select DMA_NONCOHERENT
	select SWAP_IO_SPACE
	select NO_EXCEPT_FILL
	select BOOT_RAW
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_HAS_CPU_MIPS32_R2
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select IRQ_CPU
	select SERIAL_8250
	select SERIAL_8250_CONSOLE
	help
	  This adds support for the PMC-Sierra family of Multi-Service
	  Processor System-On-A-Chips.  These parts include a number
	  of integrated peripherals, interfaces and DSPs in addition to
	  a variety of MIPS cores.

306
config PMC_YOSEMITE
307
	bool "PMC-Sierra Yosemite eval board"
308
	select CEVT_R4K
309
	select CSRC_R4K
310 311 312 313 314 315
	select DMA_COHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select IRQ_CPU_RM7K
	select IRQ_CPU_RM9K
	select SWAP_IO_SPACE
316
	select SYS_HAS_CPU_RM9000
317
	select SYS_HAS_EARLY_PRINTK
318 319 320 321
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_HIGHMEM
322
	select SYS_SUPPORTS_SMP
323 324 325
	help
	  Yosemite is an evaluation board for the RM9000x2 processor
	  manufactured by PMC-Sierra.
L
Linus Torvalds 已提交
326

327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
config POWERTV
	bool "Cisco PowerTV"
	select BOOT_ELF32
	select CEVT_R4K
	select CPU_MIPSR2_IRQ_VI
	select CPU_MIPSR2_IRQ_EI
	select CSRC_POWERTV
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select SYS_HAS_EARLY_PRINTK
	select SYS_HAS_CPU_MIPS32_R2
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_HIGHMEM
	select USB_OHCI_LITTLE_ENDIAN
	help
	  This enables support for the Cisco PowerTV Platform.

L
Linus Torvalds 已提交
345
config SGI_IP22
346
	bool "SGI IP22 (Indy/Indigo2)"
L
Linus Torvalds 已提交
347 348 349
	select ARC
	select ARC32
	select BOOT_ELF32
350
	select CEVT_R4K
351
	select CSRC_R4K
T
Thomas Bogendoerfer 已提交
352
	select DEFAULT_SGI_PARTITION
L
Linus Torvalds 已提交
353
	select DMA_NONCOHERENT
354
	select HW_HAS_EISA
355
	select I8253
356
	select I8259
L
Linus Torvalds 已提交
357 358
	select IP22_CPU_SCACHE
	select IRQ_CPU
359
	select GENERIC_ISA_DMA_SUPPORT_BROKEN
T
Thomas Bogendoerfer 已提交
360 361
	select SGI_HAS_I8042
	select SGI_HAS_INDYDOG
362
	select SGI_HAS_HAL2
T
Thomas Bogendoerfer 已提交
363 364 365
	select SGI_HAS_SEEQ
	select SGI_HAS_WD93
	select SGI_HAS_ZILOG
L
Linus Torvalds 已提交
366
	select SWAP_IO_SPACE
367 368
	select SYS_HAS_CPU_R4X00
	select SYS_HAS_CPU_R5000
369 370 371 372 373 374 375 376
	#
	# Disable EARLY_PRINTK for now since it leads to overwritten prom
	# memory during early boot on some machines.
	#
	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
	# for a more details discussion
	#
	# select SYS_HAS_EARLY_PRINTK
377 378
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL
379
	select SYS_SUPPORTS_BIG_ENDIAN
L
Linus Torvalds 已提交
380 381 382 383 384 385
	help
	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
	  that runs on these, say Y here.

config SGI_IP27
386
	bool "SGI IP27 (Origin200/2000)"
L
Linus Torvalds 已提交
387 388
	select ARC
	select ARC64
389
	select BOOT_ELF64
T
Thomas Bogendoerfer 已提交
390
	select DEFAULT_SGI_PARTITION
391
	select DMA_COHERENT
392
	select SYS_HAS_EARLY_PRINTK
L
Linus Torvalds 已提交
393
	select HW_HAS_PCI
394
	select NR_CPUS_DEFAULT_64
395
	select SYS_HAS_CPU_R10000
396
	select SYS_SUPPORTS_64BIT_KERNEL
397
	select SYS_SUPPORTS_BIG_ENDIAN
398
	select SYS_SUPPORTS_NUMA
399
	select SYS_SUPPORTS_SMP
L
Linus Torvalds 已提交
400 401 402 403 404
	help
	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
	  workstations.  To compile a Linux kernel that runs on these, say Y
	  here.

T
Thomas Bogendoerfer 已提交
405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421
config SGI_IP28
	bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	select ARC
	select ARC64
	select BOOT_ELF64
	select CEVT_R4K
	select CSRC_R4K
	select DEFAULT_SGI_PARTITION
	select DMA_NONCOHERENT
	select GENERIC_ISA_DMA_SUPPORT_BROKEN
	select IRQ_CPU
	select HW_HAS_EISA
	select I8253
	select I8259
	select SGI_HAS_I8042
	select SGI_HAS_INDYDOG
422
	select SGI_HAS_HAL2
T
Thomas Bogendoerfer 已提交
423 424 425 426 427
	select SGI_HAS_SEEQ
	select SGI_HAS_WD93
	select SGI_HAS_ZILOG
	select SWAP_IO_SPACE
	select SYS_HAS_CPU_R10000
428 429 430 431 432 433 434 435
	#
	# Disable EARLY_PRINTK for now since it leads to overwritten prom
	# memory during early boot on some machines.
	#
	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
	# for a more details discussion
	#
	# select SYS_HAS_EARLY_PRINTK
T
Thomas Bogendoerfer 已提交
436 437 438 439 440 441
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
      help
        This is the SGI Indigo2 with R10000 processor.  To compile a Linux
        kernel that runs on these, say Y here.

L
Linus Torvalds 已提交
442
config SGI_IP32
443
	bool "SGI IP32 (O2)"
L
Linus Torvalds 已提交
444 445 446
	select ARC
	select ARC32
	select BOOT_ELF32
447
	select CEVT_R4K
448
	select CSRC_R4K
L
Linus Torvalds 已提交
449 450
	select DMA_NONCOHERENT
	select HW_HAS_PCI
451
	select IRQ_CPU
L
Linus Torvalds 已提交
452 453
	select R5000_CPU_SCACHE
	select RM7000_CPU_SCACHE
454 455 456
	select SYS_HAS_CPU_R5000
	select SYS_HAS_CPU_R10000 if BROKEN
	select SYS_HAS_CPU_RM7000
R
Ralf Baechle 已提交
457
	select SYS_HAS_CPU_NEVADA
458
	select SYS_SUPPORTS_64BIT_KERNEL
459 460
	select SYS_SUPPORTS_BIG_ENDIAN
	help
461
	  If you want this kernel to run on SGI O2 workstation, say Y here.
L
Linus Torvalds 已提交
462

463 464 465
config SIBYTE_CRHINE
	bool "Sibyte BCM91120C-CRhine"
	depends on EXPERIMENTAL
A
Andrew Isaacson 已提交
466 467
	select BOOT_ELF32
	select DMA_COHERENT
468
	select SIBYTE_BCM1120
A
Andrew Isaacson 已提交
469
	select SWAP_IO_SPACE
470
	select SYS_HAS_CPU_SB1
A
Andrew Isaacson 已提交
471 472 473
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_LITTLE_ENDIAN

474 475 476
config SIBYTE_CARMEL
	bool "Sibyte BCM91120x-Carmel"
	depends on EXPERIMENTAL
477
	select BOOT_ELF32
L
Linus Torvalds 已提交
478
	select DMA_COHERENT
479
	select SIBYTE_BCM1120
480
	select SWAP_IO_SPACE
481
	select SYS_HAS_CPU_SB1
482
	select SYS_SUPPORTS_BIG_ENDIAN
483
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
484

485 486
config SIBYTE_CRHONE
	bool "Sibyte BCM91125C-CRhone"
487 488 489
	depends on EXPERIMENTAL
	select BOOT_ELF32
	select DMA_COHERENT
490
	select SIBYTE_BCM1125
491
	select SWAP_IO_SPACE
492
	select SYS_HAS_CPU_SB1
493
	select SYS_SUPPORTS_BIG_ENDIAN
494
	select SYS_SUPPORTS_HIGHMEM
495
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
496

497
config SIBYTE_RHONE
498
	bool "Sibyte BCM91125E-Rhone"
499 500 501 502 503
	depends on EXPERIMENTAL
	select BOOT_ELF32
	select DMA_COHERENT
	select SIBYTE_BCM1125H
	select SWAP_IO_SPACE
504
	select SYS_HAS_CPU_SB1
505 506
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
507

508 509
config SIBYTE_SWARM
	bool "Sibyte BCM91250A-SWARM"
510
	select BOOT_ELF32
P
Pete Popov 已提交
511
	select DMA_COHERENT
512 513
	select NR_CPUS_DEFAULT_2
	select SIBYTE_SB1250
514
	select SWAP_IO_SPACE
515
	select SYS_HAS_CPU_SB1
516
	select SYS_SUPPORTS_BIG_ENDIAN
517
	select SYS_SUPPORTS_HIGHMEM
P
Pete Popov 已提交
518
	select SYS_SUPPORTS_LITTLE_ENDIAN
519
	select ZONE_DMA32 if 64BIT
P
Pete Popov 已提交
520

521 522
config SIBYTE_LITTLESUR
	bool "Sibyte BCM91250C2-LittleSur"
523 524 525
	depends on EXPERIMENTAL
	select BOOT_ELF32
	select DMA_COHERENT
526
	select NR_CPUS_DEFAULT_2
527 528
	select SIBYTE_SB1250
	select SWAP_IO_SPACE
529
	select SYS_HAS_CPU_SB1
530 531 532
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_HIGHMEM
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
533

534 535
config SIBYTE_SENTOSA
	bool "Sibyte BCM91250E-Sentosa"
536 537 538
	depends on EXPERIMENTAL
	select BOOT_ELF32
	select DMA_COHERENT
539
	select NR_CPUS_DEFAULT_2
540 541
	select SIBYTE_SB1250
	select SWAP_IO_SPACE
542
	select SYS_HAS_CPU_SB1
543 544
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
545

546 547
config SIBYTE_BIGSUR
	bool "Sibyte BCM91480B-BigSur"
548 549
	select BOOT_ELF32
	select DMA_COHERENT
550 551
	select NR_CPUS_DEFAULT_4
	select SIBYTE_BCM1x80
552
	select SWAP_IO_SPACE
553
	select SYS_HAS_CPU_SB1
554
	select SYS_SUPPORTS_BIG_ENDIAN
R
Ralf Baechle 已提交
555
	select SYS_SUPPORTS_HIGHMEM
556
	select SYS_SUPPORTS_LITTLE_ENDIAN
557
	select ZONE_DMA32 if 64BIT
L
Linus Torvalds 已提交
558

559 560
config SNI_RM
	bool "SNI RM200/300/400"
561 562
	select ARC if CPU_LITTLE_ENDIAN
	select ARC32 if CPU_LITTLE_ENDIAN
563
	select SNIPROM if CPU_BIG_ENDIAN
564
	select ARCH_MAY_HAVE_PC_FDC
L
Linus Torvalds 已提交
565
	select BOOT_ELF32
566
	select CEVT_R4K
567
	select CSRC_R4K
T
Thomas Bogendoerfer 已提交
568
	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
L
Linus Torvalds 已提交
569 570
	select DMA_NONCOHERENT
	select GENERIC_ISA_DMA
571
	select HW_HAS_EISA
L
Linus Torvalds 已提交
572
	select HW_HAS_PCI
573
	select IRQ_CPU
574
	select I8253
L
Linus Torvalds 已提交
575 576
	select I8259
	select ISA
577
	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
578
	select SYS_HAS_CPU_R4X00
579
	select SYS_HAS_CPU_R5000
580
	select SYS_HAS_CPU_R10000
581
	select R5000_CPU_SCACHE
582
	select SYS_HAS_EARLY_PRINTK
583 584
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
585
	select SYS_SUPPORTS_BIG_ENDIAN
R
Ralf Baechle 已提交
586
	select SYS_SUPPORTS_HIGHMEM
587
	select SYS_SUPPORTS_LITTLE_ENDIAN
L
Linus Torvalds 已提交
588
	help
589 590
	  The SNI RM200/300/400 are MIPS-based machines manufactured by
	  Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
L
Linus Torvalds 已提交
591 592 593
	  Technology and now in turn merged with Fujitsu.  Say Y here to
	  support this machine type.

594 595
config MACH_TX39XX
	bool "Toshiba TX39 series based machines"
596

597 598
config MACH_TX49XX
	bool "Toshiba TX49 series based machines"
599

600 601 602 603 604 605 606 607 608 609 610 611
config MIKROTIK_RB532
	bool "Mikrotik RB532 boards"
	select CEVT_R4K
	select CSRC_R4K
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select IRQ_CPU
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_LITTLE_ENDIAN
	select SWAP_IO_SPACE
	select BOOT_RAW
612
	select ARCH_REQUIRE_GPIOLIB
613 614 615 616
	help
	  Support the Mikrotik(tm) RouterBoard 532 series,
	  based on the IDT RC32434 SoC.

617 618
config WR_PPMC
	bool "Wind River PPMC board"
619
	select CEVT_R4K
620
	select CSRC_R4K
621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639
	select IRQ_CPU
	select BOOT_ELF32
	select DMA_NONCOHERENT
	select HW_HAS_PCI
	select PCI_GT64XXX_PCI0
	select SWAP_IO_SPACE
	select SYS_HAS_CPU_MIPS32_R1
	select SYS_HAS_CPU_MIPS32_R2
	select SYS_HAS_CPU_MIPS64_R1
	select SYS_HAS_CPU_NEVADA
	select SYS_HAS_CPU_RM7000
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_LITTLE_ENDIAN
	help
	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
	  board, which is based on GT64120 bridge chip.

640
config CAVIUM_OCTEON_SIMULATOR
641
	bool "Cavium Networks Octeon Simulator"
642 643 644 645 646 647
	select CEVT_R4K
	select 64BIT_PHYS_ADDR
	select DMA_COHERENT
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_HIGHMEM
648
	select SYS_SUPPORTS_HOTPLUG_CPU
649
	select SYS_HAS_CPU_CAVIUM_OCTEON
650 651 652 653 654 655
	help
	  The Octeon simulator is software performance model of the Cavium
	  Octeon Processor. It supports simulating Octeon processors on x86
	  hardware.

config CAVIUM_OCTEON_REFERENCE_BOARD
656
	bool "Cavium Networks Octeon reference board"
657 658 659 660 661 662
	select CEVT_R4K
	select 64BIT_PHYS_ADDR
	select DMA_COHERENT
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN
	select SYS_SUPPORTS_HIGHMEM
663
	select SYS_SUPPORTS_HOTPLUG_CPU
664
	select SYS_HAS_EARLY_PRINTK
665
	select SYS_HAS_CPU_CAVIUM_OCTEON
666
	select SWAP_IO_SPACE
667 668
	select HW_HAS_PCI
	select ARCH_SUPPORTS_MSI
669 670 671 672 673 674 675 676 677 678 679 680 681
	help
	  This option supports all of the Octeon reference boards from Cavium
	  Networks. It builds a kernel that dynamically determines the Octeon
	  CPU type and supports all known board reference implementations.
	  Some of the supported boards are:
		EBT3000
		EBH3000
		EBH3100
		Thunder
		Kodama
		Hikari
	  Say Y here for most Octeon reference boards.

682
endchoice
L
Linus Torvalds 已提交
683

R
Ralf Baechle 已提交
684
source "arch/mips/alchemy/Kconfig"
685
source "arch/mips/bcm63xx/Kconfig"
686
source "arch/mips/jazz/Kconfig"
687
source "arch/mips/lasat/Kconfig"
688
source "arch/mips/pmc-sierra/Kconfig"
689
source "arch/mips/powertv/Kconfig"
690
source "arch/mips/sgi-ip27/Kconfig"
691
source "arch/mips/sibyte/Kconfig"
A
Atsushi Nemoto 已提交
692
source "arch/mips/txx9/Kconfig"
693
source "arch/mips/vr41xx/Kconfig"
694
source "arch/mips/cavium-octeon/Kconfig"
695
source "arch/mips/loongson/Kconfig"
696

697 698
endmenu

L
Linus Torvalds 已提交
699 700 701 702 703 704 705
config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

706 707 708 709 710 711 712 713
config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

R
Ralf Baechle 已提交
714 715 716 717
config ARCH_SUPPORTS_OPROFILE
	bool
	default y if !MIPS_MT_SMTC

718 719 720 721 722 723 724 725
config GENERIC_FIND_NEXT_BIT
	bool
	default y

config GENERIC_HWEIGHT
	bool
	default y

L
Linus Torvalds 已提交
726 727 728 729
config GENERIC_CALIBRATE_DELAY
	bool
	default y

730 731 732 733
config GENERIC_CLOCKEVENTS
	bool
	default y

734 735 736 737
config GENERIC_TIME
	bool
	default y

738 739 740 741
config GENERIC_CMOS_UPDATE
	bool
	default y

742
config SCHED_OMIT_FRAME_POINTER
743 744 745
	bool
	default y

746
config GENERIC_HARDIRQS_NO__DO_IRQ
747
	def_bool y
748

L
Linus Torvalds 已提交
749 750 751 752 753 754
#
# Select some configuration options automatically based on user selections.
#
config ARC
	bool

755 756 757
config ARCH_MAY_HAVE_PC_FDC
	bool

M
Marc St-Jean 已提交
758 759 760
config BOOT_RAW
	bool

761 762 763
config CEVT_BCM1480
	bool

764 765 766
config CEVT_DS1287
	bool

767 768 769
config CEVT_GT641XX
	bool

770 771 772
config CEVT_R4K_LIB
	bool

773
config CEVT_R4K
774
	select CEVT_R4K_LIB
775 776
	bool

777 778 779
config CEVT_SB1250
	bool

780 781 782
config CEVT_TXX9
	bool

783 784 785
config CSRC_BCM1480
	bool

786 787 788
config CSRC_IOASIC
	bool

789 790 791
config CSRC_POWERTV
	bool

792 793 794
config CSRC_R4K_LIB
	bool

795
config CSRC_R4K
796
	select CSRC_R4K_LIB
797 798
	bool

799 800 801
config CSRC_SB1250
	bool

802 803
config GPIO_TXX9
	select GENERIC_GPIO
M
Michael Buesch 已提交
804
	select ARCH_REQUIRE_GPIOLIB
805 806
	bool

807 808 809
config CFE
	bool

810
config DMA_COHERENT
L
Linus Torvalds 已提交
811 812
	bool

813 814
config DMA_NONCOHERENT
	bool
815
	select NEED_DMA_MAP_STATE
816

817
config NEED_DMA_MAP_STATE
L
Linus Torvalds 已提交
818 819
	bool

820
config SYS_HAS_EARLY_PRINTK
L
Linus Torvalds 已提交
821 822
	bool

823
config HOTPLUG_CPU
824 825 826 827 828 829 830 831 832 833
	bool "Support for hot-pluggable CPUs"
	depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
	help
	  Say Y here to allow turning CPUs off and on. CPUs can be
	  controlled through /sys/devices/system/cpu.
	  (Note: power management support will enable this option
	    automatically on SMP systems. )
	  Say N if you want to disable CPU hotplug.

config SYS_SUPPORTS_HOTPLUG_CPU
834 835
	bool

L
Linus Torvalds 已提交
836 837 838 839 840 841 842 843 844
config I8259
	bool

config MIPS_BONITO64
	bool

config MIPS_MSC
	bool

845 846 847
config MIPS_NILE4
	bool

L
Linus Torvalds 已提交
848 849 850
config MIPS_DISABLE_OBSOLETE_IDE
	bool

851 852 853
config SYNC_R4K
	bool

854 855 856
config NO_IOPORT
	def_bool n

857 858 859 860
config GENERIC_ISA_DMA
	bool
	select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n

861 862
config GENERIC_ISA_DMA_SUPPORT_BROKEN
	bool
863
	select GENERIC_ISA_DMA
864

Y
Yoichi Yuasa 已提交
865 866 867
config GENERIC_GPIO
	bool

868
#
M
Matt LaPlante 已提交
869
# Endianess selection.  Sufficiently obscure so many users don't know what to
870 871 872 873 874
# answer,so we try hard to limit the available choices.  Also the use of a
# choice statement should be more obvious to the user.
#
choice
	prompt "Endianess selection"
L
Linus Torvalds 已提交
875 876
	help
	  Some MIPS machines can be configured for either little or big endian
877
	  byte order. These modes require different kernels and a different
M
Matt LaPlante 已提交
878
	  Linux distribution.  In general there is one preferred byteorder for a
879
	  particular system but some systems are just as commonly used in the
880
	  one or the other endianness.
881 882 883 884 885 886 887 888 889 890 891 892

config CPU_BIG_ENDIAN
	bool "Big endian"
	depends on SYS_SUPPORTS_BIG_ENDIAN

config CPU_LITTLE_ENDIAN
	bool "Little endian"
	depends on SYS_SUPPORTS_LITTLE_ENDIAN
	help

endchoice

893 894 895
config SYS_SUPPORTS_APM_EMULATION
	bool

896 897 898 899 900
config SYS_SUPPORTS_BIG_ENDIAN
	bool

config SYS_SUPPORTS_LITTLE_ENDIAN
	bool
L
Linus Torvalds 已提交
901

902 903 904 905 906
config SYS_SUPPORTS_HUGETLBFS
	bool
	depends on CPU_SUPPORTS_HUGEPAGES && 64BIT
	default y

L
Linus Torvalds 已提交
907 908 909 910 911 912
config IRQ_CPU
	bool

config IRQ_CPU_RM7K
	bool

913 914 915
config IRQ_CPU_RM9K
	bool

M
Marc St-Jean 已提交
916 917 918 919 920 921
config IRQ_MSP_SLP
	bool

config IRQ_MSP_CIC
	bool

922 923 924
config IRQ_TXX9
	bool

Y
Yoichi Yuasa 已提交
925 926 927
config IRQ_GT641XX
	bool

928 929 930
config IRQ_GIC
	bool

931 932 933
config IRQ_CPU_OCTEON
	bool

L
Linus Torvalds 已提交
934 935 936
config MIPS_BOARDS_GEN
	bool

937
config PCI_GT64XXX_PCI0
L
Linus Torvalds 已提交
938 939
	bool

M
Marc St-Jean 已提交
940 941 942
config NO_EXCEPT_FILL
	bool

943 944 945 946
config MIPS_RM9122
	bool
	select SERIAL_RM9000

947 948 949 950 951 952 953 954 955 956 957 958
config SOC_EMMA2RH
	bool
	select CEVT_R4K
	select CSRC_R4K
	select DMA_NONCOHERENT
	select IRQ_CPU
	select SWAP_IO_SPACE
	select SYS_HAS_CPU_R5500
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_BIG_ENDIAN

959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975
config SOC_PNX833X
	bool
	select CEVT_R4K
	select CSRC_R4K
	select IRQ_CPU
	select DMA_NONCOHERENT
	select SYS_HAS_CPU_MIPS32_R2
	select SYS_SUPPORTS_32BIT_KERNEL
	select SYS_SUPPORTS_LITTLE_ENDIAN
	select SYS_SUPPORTS_BIG_ENDIAN
	select GENERIC_GPIO
	select CPU_MIPSR2_IRQ_VI

config SOC_PNX8335
	bool
	select SOC_PNX833X

976 977 978 979 980 981 982 983
config PNX8550
	bool
	select SOC_PNX8550

config SOC_PNX8550
	bool
	select DMA_NONCOHERENT
	select HW_HAS_PCI
984
	select SYS_HAS_CPU_MIPS32_R1
985
	select SYS_HAS_EARLY_PRINTK
986
	select SYS_SUPPORTS_32BIT_KERNEL
987
	select GENERIC_GPIO
988

L
Linus Torvalds 已提交
989 990 991
config SWAP_IO_SPACE
	bool

992 993 994
config SERIAL_RM9000
	bool

T
Thomas Bogendoerfer 已提交
995 996 997
config SGI_HAS_INDYDOG
	bool

998 999 1000
config SGI_HAS_HAL2
	bool

T
Thomas Bogendoerfer 已提交
1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015
config SGI_HAS_SEEQ
	bool

config SGI_HAS_WD93
	bool

config SGI_HAS_ZILOG
	bool

config SGI_HAS_I8042
	bool

config DEFAULT_SGI_PARTITION
	bool

1016 1017 1018
config ARC32
	bool

1019 1020 1021
config SNIPROM
	bool

L
Linus Torvalds 已提交
1022 1023 1024 1025 1026
config BOOT_ELF32
	bool

config MIPS_L1_CACHE_SHIFT
	int
1027
	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
1028
	default "6" if MIPS_CPU_SCACHE
1029
	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
L
Linus Torvalds 已提交
1030 1031 1032 1033 1034 1035 1036
	default "5"

config HAVE_STD_PC_SERIAL_PORT
	bool

config ARC_CONSOLE
	bool "ARC console support"
T
Thomas Bogendoerfer 已提交
1037
	depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
L
Linus Torvalds 已提交
1038 1039 1040

config ARC_MEMORY
	bool
1041
	depends on MACH_JAZZ || SNI_RM || SGI_IP32
L
Linus Torvalds 已提交
1042 1043 1044 1045
	default y

config ARC_PROMLIB
	bool
T
Thomas Bogendoerfer 已提交
1046
	depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
L
Linus Torvalds 已提交
1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060
	default y

config ARC64
	bool

config BOOT_ELF64
	bool

menu "CPU selection"

choice
	prompt "CPU type"
	default CPU_R4X00

1061 1062 1063 1064
config CPU_LOONGSON2E
	bool "Loongson 2E"
	depends on SYS_HAS_CPU_LOONGSON2E
	select CPU_LOONGSON2
1065 1066 1067 1068
	help
	  The Loongson 2E processor implements the MIPS III instruction set
	  with many extensions.

1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083
	  It has an internal FPGA northbridge, which is compatiable to
	  bonito64.

config CPU_LOONGSON2F
	bool "Loongson 2F"
	depends on SYS_HAS_CPU_LOONGSON2F
	select CPU_LOONGSON2
	help
	  The Loongson 2F processor implements the MIPS III instruction set
	  with many extensions.

	  Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
	  have a similar programming interface with FPGA northbridge used in
	  Loongson2E.

1084 1085
config CPU_MIPS32_R1
	bool "MIPS32 Release 1"
1086
	depends on SYS_HAS_CPU_MIPS32_R1
1087
	select CPU_HAS_PREFETCH
R
Ralf Baechle 已提交
1088
	select CPU_SUPPORTS_32BIT_KERNEL
1089
	select CPU_SUPPORTS_HIGHMEM
R
Ralf Baechle 已提交
1090
	help
1091
	  Choose this option to build a kernel for release 1 or later of the
R
Ralf Baechle 已提交
1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102
	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
	  MIPS processor are based on a MIPS32 processor.  If you know the
	  specific type of processor in your system, choose those that one
	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
	  Release 2 of the MIPS32 architecture is available since several
	  years so chances are you even have a MIPS32 Release 2 processor
	  in which case you should choose CPU_MIPS32_R2 instead for better
	  performance.

config CPU_MIPS32_R2
	bool "MIPS32 Release 2"
1103
	depends on SYS_HAS_CPU_MIPS32_R2
R
Ralf Baechle 已提交
1104
	select CPU_HAS_PREFETCH
R
Ralf Baechle 已提交
1105
	select CPU_SUPPORTS_32BIT_KERNEL
1106
	select CPU_SUPPORTS_HIGHMEM
1107
	help
1108
	  Choose this option to build a kernel for release 2 or later of the
1109 1110 1111 1112 1113 1114 1115
	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
	  MIPS processor are based on a MIPS32 processor.  If you know the
	  specific type of processor in your system, choose those that one
	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.

config CPU_MIPS64_R1
	bool "MIPS64 Release 1"
1116
	depends on SYS_HAS_CPU_MIPS64_R1
R
Ralf Baechle 已提交
1117
	select CPU_HAS_PREFETCH
1118 1119
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
1120
	select CPU_SUPPORTS_HIGHMEM
1121
	select CPU_SUPPORTS_HUGEPAGES
1122 1123 1124 1125 1126 1127
	help
	  Choose this option to build a kernel for release 1 or later of the
	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
	  MIPS processor are based on a MIPS64 processor.  If you know the
	  specific type of processor in your system, choose those that one
	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
R
Ralf Baechle 已提交
1128 1129 1130 1131 1132 1133 1134
	  Release 2 of the MIPS64 architecture is available since several
	  years so chances are you even have a MIPS64 Release 2 processor
	  in which case you should choose CPU_MIPS64_R2 instead for better
	  performance.

config CPU_MIPS64_R2
	bool "MIPS64 Release 2"
1135
	depends on SYS_HAS_CPU_MIPS64_R2
R
Ralf Baechle 已提交
1136
	select CPU_HAS_PREFETCH
R
Ralf Baechle 已提交
1137 1138
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
1139
	select CPU_SUPPORTS_HIGHMEM
1140
	select CPU_SUPPORTS_HUGEPAGES
R
Ralf Baechle 已提交
1141 1142 1143 1144 1145 1146
	help
	  Choose this option to build a kernel for release 2 or later of the
	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
	  MIPS processor are based on a MIPS64 processor.  If you know the
	  specific type of processor in your system, choose those that one
	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
L
Linus Torvalds 已提交
1147 1148 1149

config CPU_R3000
	bool "R3000"
1150
	depends on SYS_HAS_CPU_R3000
1151
	select CPU_HAS_WB
1152
	select CPU_SUPPORTS_32BIT_KERNEL
R
Ralf Baechle 已提交
1153
	select CPU_SUPPORTS_HIGHMEM
L
Linus Torvalds 已提交
1154 1155 1156 1157 1158 1159 1160 1161 1162 1163
	help
	  Please make sure to pick the right CPU type. Linux/MIPS is not
	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
	  *not* work on R4000 machines and vice versa.  However, since most
	  of the supported machines have an R4000 (or similar) CPU, R4x00
	  might be a safe bet.  If the resulting kernel does not work,
	  try to recompile with R3000.

config CPU_TX39XX
	bool "R39XX"
1164
	depends on SYS_HAS_CPU_TX39XX
1165
	select CPU_SUPPORTS_32BIT_KERNEL
L
Linus Torvalds 已提交
1166 1167 1168

config CPU_VR41XX
	bool "R41xx"
1169
	depends on SYS_HAS_CPU_VR41XX
1170 1171
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1172
	help
1173
	  The options selects support for the NEC VR4100 series of processors.
L
Linus Torvalds 已提交
1174 1175 1176 1177 1178 1179
	  Only choose this option if you have one of these processors as a
	  kernel built with this option will not run on any other type of
	  processor or vice versa.

config CPU_R4300
	bool "R4300"
1180
	depends on SYS_HAS_CPU_R4300
1181 1182
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1183 1184 1185 1186 1187
	help
	  MIPS Technologies R4300-series processors.

config CPU_R4X00
	bool "R4x00"
1188
	depends on SYS_HAS_CPU_R4X00
1189 1190
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1191 1192 1193 1194 1195 1196
	help
	  MIPS Technologies R4000-series processors other than 4300, including
	  the R4000, R4400, R4600, and 4700.

config CPU_TX49XX
	bool "R49XX"
1197
	depends on SYS_HAS_CPU_TX49XX
A
Atsushi Nemoto 已提交
1198
	select CPU_HAS_PREFETCH
1199 1200
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1201 1202 1203

config CPU_R5000
	bool "R5000"
1204
	depends on SYS_HAS_CPU_R5000
1205 1206
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1207 1208 1209 1210 1211
	help
	  MIPS Technologies R5000-series processors other than the Nevada.

config CPU_R5432
	bool "R5432"
1212
	depends on SYS_HAS_CPU_R5432
1213 1214
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1215

1216 1217 1218 1219 1220
config CPU_R5500
	bool "R5500"
	depends on SYS_HAS_CPU_R5500
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
1221
	select CPU_SUPPORTS_HUGEPAGES
1222 1223 1224 1225
	help
	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
	  instruction set.

L
Linus Torvalds 已提交
1226 1227
config CPU_R6000
	bool "R6000"
1228
	depends on EXPERIMENTAL
1229
	depends on SYS_HAS_CPU_R6000
1230
	select CPU_SUPPORTS_32BIT_KERNEL
L
Linus Torvalds 已提交
1231 1232
	help
	  MIPS Technologies R6000 and R6000A series processors.  Note these
C
Chris Dearman 已提交
1233
	  processors are extremely rare and the support for them is incomplete.
L
Linus Torvalds 已提交
1234 1235 1236

config CPU_NEVADA
	bool "RM52xx"
1237
	depends on SYS_HAS_CPU_NEVADA
1238 1239
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1240 1241 1242 1243 1244
	help
	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.

config CPU_R8000
	bool "R8000"
1245
	depends on EXPERIMENTAL
1246
	depends on SYS_HAS_CPU_R8000
1247
	select CPU_HAS_PREFETCH
1248
	select CPU_SUPPORTS_64BIT_KERNEL
L
Linus Torvalds 已提交
1249 1250 1251 1252 1253 1254
	help
	  MIPS Technologies R8000 processors.  Note these processors are
	  uncommon and the support for them is incomplete.

config CPU_R10000
	bool "R10000"
1255
	depends on SYS_HAS_CPU_R10000
1256
	select CPU_HAS_PREFETCH
1257 1258
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
R
Ralf Baechle 已提交
1259
	select CPU_SUPPORTS_HIGHMEM
L
Linus Torvalds 已提交
1260 1261 1262 1263 1264
	help
	  MIPS Technologies R10000-series processors.

config CPU_RM7000
	bool "RM7000"
1265
	depends on SYS_HAS_CPU_RM7000
1266
	select CPU_HAS_PREFETCH
1267 1268
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
R
Ralf Baechle 已提交
1269
	select CPU_SUPPORTS_HIGHMEM
L
Linus Torvalds 已提交
1270 1271 1272

config CPU_RM9000
	bool "RM9000"
1273
	depends on SYS_HAS_CPU_RM9000
1274
	select CPU_HAS_PREFETCH
1275 1276
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
R
Ralf Baechle 已提交
1277
	select CPU_SUPPORTS_HIGHMEM
1278
	select WEAK_ORDERING
L
Linus Torvalds 已提交
1279 1280 1281

config CPU_SB1
	bool "SB1"
1282
	depends on SYS_HAS_CPU_SB1
1283 1284
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
R
Ralf Baechle 已提交
1285
	select CPU_SUPPORTS_HIGHMEM
1286
	select WEAK_ORDERING
L
Linus Torvalds 已提交
1287

1288 1289
config CPU_CAVIUM_OCTEON
	bool "Cavium Octeon processor"
1290
	depends on SYS_HAS_CPU_CAVIUM_OCTEON
1291 1292 1293 1294 1295 1296 1297 1298
	select IRQ_CPU
	select IRQ_CPU_OCTEON
	select CPU_HAS_PREFETCH
	select CPU_SUPPORTS_64BIT_KERNEL
	select SYS_SUPPORTS_SMP
	select NR_CPUS_DEFAULT_16
	select WEAK_ORDERING
	select CPU_SUPPORTS_HIGHMEM
1299
	select CPU_SUPPORTS_HUGEPAGES
1300 1301 1302 1303 1304 1305
	help
	  The Cavium Octeon processor is a highly integrated chip containing
	  many ethernet hardware widgets for networking tasks. The processor
	  can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
	  Full details can be found at http://www.caviumnetworks.com.

L
Linus Torvalds 已提交
1306 1307
endchoice

1308 1309 1310 1311 1312
config SYS_SUPPORTS_ZBOOT
	bool
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_BZIP2
	select HAVE_KERNEL_LZMA
1313
	select HAVE_KERNEL_LZO
1314 1315 1316 1317 1318

config SYS_SUPPORTS_ZBOOT_UART16550
	bool
	select SYS_SUPPORTS_ZBOOT

1319 1320 1321 1322 1323 1324 1325
config CPU_LOONGSON2
	bool
	select CPU_SUPPORTS_32BIT_KERNEL
	select CPU_SUPPORTS_64BIT_KERNEL
	select CPU_SUPPORTS_HIGHMEM

config SYS_HAS_CPU_LOONGSON2E
1326 1327
	bool

1328 1329
config SYS_HAS_CPU_LOONGSON2F
	bool
1330 1331
	select CPU_SUPPORTS_CPUFREQ
	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
1332
	select CPU_SUPPORTS_UNCACHED_ACCELERATED
1333

1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369
config SYS_HAS_CPU_MIPS32_R1
	bool

config SYS_HAS_CPU_MIPS32_R2
	bool

config SYS_HAS_CPU_MIPS64_R1
	bool

config SYS_HAS_CPU_MIPS64_R2
	bool

config SYS_HAS_CPU_R3000
	bool

config SYS_HAS_CPU_TX39XX
	bool

config SYS_HAS_CPU_VR41XX
	bool

config SYS_HAS_CPU_R4300
	bool

config SYS_HAS_CPU_R4X00
	bool

config SYS_HAS_CPU_TX49XX
	bool

config SYS_HAS_CPU_R5000
	bool

config SYS_HAS_CPU_R5432
	bool

1370 1371 1372
config SYS_HAS_CPU_R5500
	bool

1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393
config SYS_HAS_CPU_R6000
	bool

config SYS_HAS_CPU_NEVADA
	bool

config SYS_HAS_CPU_R8000
	bool

config SYS_HAS_CPU_R10000
	bool

config SYS_HAS_CPU_RM7000
	bool

config SYS_HAS_CPU_RM9000
	bool

config SYS_HAS_CPU_SB1
	bool

1394 1395 1396
config SYS_HAS_CPU_CAVIUM_OCTEON
	bool

1397 1398 1399 1400
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
#
1401 1402
config WEAK_ORDERING
	bool
1403 1404 1405 1406 1407 1408 1409

#
# CPU may reorder reads and writes beyond LL/SC
# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
#
config WEAK_REORDERING_BEYOND_LLSC
	bool
1410 1411 1412
endmenu

#
C
Chris Dearman 已提交
1413
# These two indicate any level of the MIPS32 and MIPS64 architecture
1414 1415 1416 1417 1418 1419 1420 1421 1422 1423
#
config CPU_MIPS32
	bool
	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2

config CPU_MIPS64
	bool
	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2

#
C
Chris Dearman 已提交
1424
# These two indicate the revision of the architecture, either Release 1 or Release 2
1425 1426 1427 1428 1429 1430 1431
#
config CPU_MIPSR1
	bool
	default y if CPU_MIPS32_R1 || CPU_MIPS64_R1

config CPU_MIPSR2
	bool
1432
	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
1433 1434 1435 1436 1437 1438 1439 1440 1441

config SYS_SUPPORTS_32BIT_KERNEL
	bool
config SYS_SUPPORTS_64BIT_KERNEL
	bool
config CPU_SUPPORTS_32BIT_KERNEL
	bool
config CPU_SUPPORTS_64BIT_KERNEL
	bool
1442 1443 1444 1445
config CPU_SUPPORTS_CPUFREQ
	bool
config CPU_SUPPORTS_ADDRWINCFG
	bool
1446 1447
config CPU_SUPPORTS_HUGEPAGES
	bool
1448 1449
config CPU_SUPPORTS_UNCACHED_ACCELERATED
	bool
1450 1451 1452
config MIPS_PGD_C0_CONTEXT
	bool
	default y if 64BIT && CPU_MIPSR2
1453

1454 1455 1456 1457 1458
#
# Set to y for ptrace access to watch registers.
#
config HARDWARE_WATCHPOINTS
       bool
1459
       default y if CPU_MIPSR1 || CPU_MIPSR2
1460

1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480
menu "Kernel type"

choice

	prompt "Kernel code model"
	help
	  You should only select this option if you have a workload that
	  actually benefits from 64-bit processing or if your machine has
	  large memory.  You will only be presented a single option in this
	  menu if your system does not support both 32-bit and 64-bit kernels.

config 32BIT
	bool "32-bit kernel"
	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
	select TRAD_SIGNALS
	help
	  Select this option if you want to build a 32-bit kernel.
config 64BIT
	bool "64-bit kernel"
	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
1481
	select HAVE_SYSCALL_WRAPPERS
1482 1483 1484 1485 1486
	help
	  Select this option if you want to build a 64-bit kernel.

endchoice

L
Linus Torvalds 已提交
1487 1488 1489 1490 1491 1492
choice
	prompt "Kernel page size"
	default PAGE_SIZE_4KB

config PAGE_SIZE_4KB
	bool "4kB"
W
Wu Zhangjin 已提交
1493
	depends on !CPU_LOONGSON2
L
Linus Torvalds 已提交
1494 1495 1496 1497 1498 1499 1500 1501
	help
	 This option select the standard 4kB Linux page size.  On some
	 R3000-family processors this is the only available page size.  Using
	 4kB page size will minimize memory consumption and is therefore
	 recommended for low memory systems.

config PAGE_SIZE_8KB
	bool "8kB"
1502
	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
L
Linus Torvalds 已提交
1503 1504 1505
	help
	  Using 8kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available
1506 1507
	  only on R8000 and cnMIPS processors.  Note that you will need a
	  suitable Linux distribution to support this.
L
Linus Torvalds 已提交
1508 1509 1510

config PAGE_SIZE_16KB
	bool "16kB"
1511
	depends on !CPU_R3000 && !CPU_TX39XX
L
Linus Torvalds 已提交
1512 1513 1514
	help
	  Using 16kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available on
1515 1516
	  all non-R3000 family processors.  Note that you will need a suitable
	  Linux distribution to support this.
L
Linus Torvalds 已提交
1517

1518 1519 1520 1521 1522 1523 1524 1525 1526
config PAGE_SIZE_32KB
	bool "32kB"
	depends on CPU_CAVIUM_OCTEON
	help
	  Using 32kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available
	  only on cnMIPS cores.  Note that you will need a suitable Linux
	  distribution to support this.

L
Linus Torvalds 已提交
1527 1528 1529 1530 1531 1532 1533
config PAGE_SIZE_64KB
	bool "64kB"
	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
	help
	  Using 64kB page size will result in higher performance kernel at
	  the price of higher memory consumption.  This option is available on
	  all non-R3000 family processor.  Not that at the time of this
1534
	  writing this option is still high experimental.
L
Linus Torvalds 已提交
1535 1536 1537 1538 1539 1540 1541 1542 1543 1544

endchoice

config BOARD_SCACHE
	bool

config IP22_CPU_SCACHE
	bool
	select BOARD_SCACHE

1545 1546 1547 1548 1549 1550 1551
#
# Support for a MIPS32 / MIPS64 style S-caches
#
config MIPS_CPU_SCACHE
	bool
	select BOARD_SCACHE

L
Linus Torvalds 已提交
1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568
config R5000_CPU_SCACHE
	bool
	select BOARD_SCACHE

config RM7000_CPU_SCACHE
	bool
	select BOARD_SCACHE

config SIBYTE_DMA_PAGEOPS
	bool "Use DMA to clear/copy pages"
	depends on CPU_SB1
	help
	  Instead of using the CPU to zero and copy pages, use a Data Mover
	  channel.  These DMA channels are otherwise unused by the standard
	  SiByte Linux port.  Seems to give a small performance benefit.

config CPU_HAS_PREFETCH
1569
	bool
L
Linus Torvalds 已提交
1570

R
Ralf Baechle 已提交
1571 1572
choice
	prompt "MIPS MT options"
1573 1574 1575 1576 1577 1578 1579 1580

config MIPS_MT_DISABLED
	bool "Disable multithreading support."
	help
	  Use this option if your workload can't take advantage of
	  MIPS hardware multithreading support.  On systems that don't have
	  the option of an MT-enabled processor this option will be the only
	  option in this menu.
R
Ralf Baechle 已提交
1581

R
Ralf Baechle 已提交
1582 1583
config MIPS_MT_SMP
	bool "Use 1 TC on each available VPE for SMP"
1584
	depends on SYS_SUPPORTS_MULTITHREADING
1585
	select CPU_MIPSR2_IRQ_VI
1586
	select CPU_MIPSR2_IRQ_EI
1587
	select MIPS_MT
1588
	select NR_CPUS_DEFAULT_2
1589
	select SMP
1590
	select SYS_SUPPORTS_SCHED_SMT if SMP
1591
	select SYS_SUPPORTS_SMP
1592
	select SMP_UP
1593
	help
R
Ralf Baechle 已提交
1594 1595
	  This is a kernel model which is also known a VSMP or lately
	  has been marketesed into SMVP.
1596

R
Ralf Baechle 已提交
1597 1598 1599 1600
config MIPS_MT_SMTC
	bool "SMTC: Use all TCs on all VPEs for SMP"
	depends on CPU_MIPS32_R2
	#depends on CPU_MIPS64_R2		# once there is hardware ...
1601 1602
	depends on SYS_SUPPORTS_MULTITHREADING
	select CPU_MIPSR2_IRQ_VI
1603
	select CPU_MIPSR2_IRQ_EI
1604
	select MIPS_MT
1605
	select NR_CPUS_DEFAULT_8
R
Ralf Baechle 已提交
1606
	select SMP
1607
	select SYS_SUPPORTS_SMP
1608
	select SMP_UP
1609
	help
R
Ralf Baechle 已提交
1610 1611
	  This is a kernel model which is known a SMTC or lately has been
	  marketesed into SMVP.
R
Ralf Baechle 已提交
1612 1613 1614

endchoice

1615 1616 1617
config MIPS_MT
	bool

1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630
config SCHED_SMT
	bool "SMT (multithreading) scheduler support"
	depends on SYS_SUPPORTS_SCHED_SMT
	default n
	help
	  SMT scheduler support improves the CPU scheduler's decision making
	  when dealing with MIPS MT enabled cores at a cost of slightly
	  increased overhead in some places. If unsure say N here.

config SYS_SUPPORTS_SCHED_SMT
	bool


1631 1632 1633
config SYS_SUPPORTS_MULTITHREADING
	bool

R
Ralf Baechle 已提交
1634 1635 1636
config MIPS_MT_FPAFF
	bool "Dynamic FPU affinity for FP-intensive threads"
	default y
1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647
	depends on MIPS_MT_SMP || MIPS_MT_SMTC

config MIPS_VPE_LOADER
	bool "VPE loader support."
	depends on SYS_SUPPORTS_MULTITHREADING
	select CPU_MIPSR2_IRQ_VI
	select CPU_MIPSR2_IRQ_EI
	select MIPS_MT
	help
	  Includes a loader for loading an elf relocatable object
	  onto another VPE and running it.
R
Ralf Baechle 已提交
1648

1649 1650 1651
config MIPS_MT_SMTC_IM_BACKSTOP
	bool "Use per-TC register bits as backstop for inhibited IM bits"
	depends on MIPS_MT_SMTC
1652
	default n
1653 1654 1655 1656 1657 1658
	help
	  To support multiple TC microthreads acting as "CPUs" within
	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
	  during interrupt handling. To support legacy drivers and interrupt
	  controller management code, SMTC has a "backstop" to track and
	  if necessary restore the interrupt mask. This has some performance
1659
	  impact on interrupt service overhead.
1660

1661 1662 1663 1664 1665 1666 1667 1668
config MIPS_MT_SMTC_IRQAFF
	bool "Support IRQ affinity API"
	depends on MIPS_MT_SMTC
	default n
	help
	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
	  for SMTC Linux kernel. Requires platform support, of which
	  an example can be found in the MIPS kernel i8259 and Malta
1669 1670
	  platform code.  Adds some overhead to interrupt dispatch, and
	  should be used only if you know what you are doing.
1671

1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683
config MIPS_VPE_LOADER_TOM
	bool "Load VPE program into memory hidden from linux"
	depends on MIPS_VPE_LOADER
	default y
	help
	  The loader can use memory that is present but has been hidden from
	  Linux using the kernel command line option "mem=xxMB". It's up to
	  you to ensure the amount you put in the option and the space your
	  program requires is less or equal to the amount physically present.

# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
config MIPS_VPE_APSP_API
1684 1685 1686
	bool "Enable support for AP/SP API (RTLX)"
	depends on MIPS_VPE_LOADER
	help
1687

1688 1689 1690 1691 1692 1693 1694 1695 1696 1697
config MIPS_APSP_KSPD
	bool "Enable KSPD"
	depends on MIPS_VPE_APSP_API
	default y
	help
	  KSPD is a kernel daemon that accepts syscall requests from the SP
	  side, actions them and returns the results. It also handles the
	  "exit" syscall notifying other kernel modules the SP program is
	  exiting.  You probably want to say yes here.

1698 1699 1700
config MIPS_CMP
	bool "MIPS CMP framework support"
	depends on SYS_SUPPORTS_MIPS_CMP
1701
	select SYNC_R4K
1702 1703 1704 1705 1706 1707 1708 1709
	select SYS_SUPPORTS_SMP
	select SYS_SUPPORTS_SCHED_SMT if SMP
	select WEAK_ORDERING
	default n
	help
	  This is a placeholder option for the GCMP work. It will need to
	  be handled differently...

L
Linus Torvalds 已提交
1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725
config SB1_PASS_1_WORKAROUNDS
	bool
	depends on CPU_SB1_PASS_1
	default y

config SB1_PASS_2_WORKAROUNDS
	bool
	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
	default y

config SB1_PASS_2_1_WORKAROUNDS
	bool
	depends on CPU_SB1 && CPU_SB1_PASS_2
	default y

config 64BIT_PHYS_ADDR
1726
	bool
L
Linus Torvalds 已提交
1727

1728 1729 1730
config ARCH_PHYS_ADDR_T_64BIT
       def_bool 64BIT_PHYS_ADDR

1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742
config CPU_HAS_SMARTMIPS
	depends on SYS_SUPPORTS_SMARTMIPS
	bool "Support for the SmartMIPS ASE"
	help
	  SmartMIPS is a extension of the MIPS32 architecture aimed at
	  increased security at both hardware and software level for
	  smartcards.  Enabling this option will allow proper use of the
	  SmartMIPS instructions by Linux applications.  However a kernel with
	  this option will not work on a MIPS core without SmartMIPS core.  If
	  you don't know you probably don't have SmartMIPS and should say N
	  here.

L
Linus Torvalds 已提交
1743
config CPU_HAS_WB
1744
	bool
1745

1746 1747 1748
#
# Vectored interrupt mode is an R2 feature
#
1749
config CPU_MIPSR2_IRQ_VI
1750
	bool
1751

1752 1753 1754
#
# Extended interrupt mode is an R2 feature
#
1755
config CPU_MIPSR2_IRQ_EI
1756
	bool
1757

L
Linus Torvalds 已提交
1758 1759 1760 1761 1762
config CPU_HAS_SYNC
	bool
	depends on !CPU_R3000
	default y

R
Ralf Baechle 已提交
1763 1764 1765
config GENERIC_CLOCKEVENTS_BROADCAST
	bool

1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778
#
# CPU non-features
#
config CPU_DADDI_WORKAROUNDS
	bool

config CPU_R4000_WORKAROUNDS
	bool
	select CPU_R4400_WORKAROUNDS

config CPU_R4400_WORKAROUNDS
	bool

R
Ralf Baechle 已提交
1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789
#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

1790 1791 1792
config IRQ_PER_CPU
	bool

L
Linus Torvalds 已提交
1793 1794 1795 1796 1797 1798 1799 1800 1801
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
#   caches such as R3000, SB1, R7000 or those that look like they're virtually
#   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
#   moment we protect the user and offer the highmem option only on machines
#   where it's known to be safe.  This will not offer highmem on a few systems
#   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
#   indexed CPUs but we're playing safe.
R
Ralf Baechle 已提交
1802 1803 1804
# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
#   know they might have memory configurations that could make use of highmem
#   support.
L
Linus Torvalds 已提交
1805 1806 1807
#
config HIGHMEM
	bool "High Memory Support"
R
Ralf Baechle 已提交
1808 1809 1810 1811 1812 1813 1814
	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM

config CPU_SUPPORTS_HIGHMEM
	bool

config SYS_SUPPORTS_HIGHMEM
	bool
L
Linus Torvalds 已提交
1815

1816 1817 1818
config SYS_SUPPORTS_SMARTMIPS
	bool

1819 1820
config ARCH_FLATMEM_ENABLE
	def_bool y
1821
	depends on !NUMA && !CPU_LOONGSON2
1822

1823 1824 1825 1826
config ARCH_DISCONTIGMEM_ENABLE
	bool
	default y if SGI_IP27
	help
1827
	  Say Y to support efficient handling of discontiguous physical memory,
1828 1829 1830 1831
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa> for more.

1832 1833 1834
config ARCH_POPULATES_NODE_MAP
	def_bool y

1835 1836
config ARCH_SPARSEMEM_ENABLE
	bool
A
Atsushi Nemoto 已提交
1837
	select SPARSEMEM_STATIC
1838

1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851
config NUMA
	bool "NUMA Support"
	depends on SYS_SUPPORTS_NUMA
	help
	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
	  Access).  This option improves performance on systems with more
	  than two nodes; on two node systems it is generally better to
	  leave it disabled; on single node systems disable this option
	  disabled.

config SYS_SUPPORTS_NUMA
	bool

Y
Yasunori Goto 已提交
1852 1853 1854 1855 1856
config NODES_SHIFT
	int
	default "6"
	depends on NEED_MULTIPLE_NODES

1857 1858
source "mm/Kconfig"

L
Linus Torvalds 已提交
1859 1860
config SMP
	bool "Multi-Processing support"
1861
	depends on SYS_SUPPORTS_SMP
1862
	select IRQ_PER_CPU
1863
	select USE_GENERIC_SMP_HELPERS
1864
	help
L
Linus Torvalds 已提交
1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  singleprocessor machines. On a singleprocessor machine, the kernel
	  will run faster if you say N here.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below.

A
Adrian Bunk 已提交
1878 1879
	  See also the SMP-HOWTO available at
	  <http://www.tldp.org/docs.html#howto>.
L
Linus Torvalds 已提交
1880 1881 1882

	  If you don't know what to do here, say N.

1883 1884 1885
config SMP_UP
	bool

1886 1887 1888
config SYS_SUPPORTS_MIPS_CMP
	bool

1889 1890 1891
config SYS_SUPPORTS_SMP
	bool

1892 1893 1894
config NR_CPUS_DEFAULT_1
	bool

1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912
config NR_CPUS_DEFAULT_2
	bool

config NR_CPUS_DEFAULT_4
	bool

config NR_CPUS_DEFAULT_8
	bool

config NR_CPUS_DEFAULT_16
	bool

config NR_CPUS_DEFAULT_32
	bool

config NR_CPUS_DEFAULT_64
	bool

L
Linus Torvalds 已提交
1913 1914
config NR_CPUS
	int "Maximum number of CPUs (2-64)"
1915
	range 1 64 if NR_CPUS_DEFAULT_1
L
Linus Torvalds 已提交
1916
	depends on SMP
1917
	default "1" if NR_CPUS_DEFAULT_1
1918 1919 1920 1921 1922 1923
	default "2" if NR_CPUS_DEFAULT_2
	default "4" if NR_CPUS_DEFAULT_4
	default "8" if NR_CPUS_DEFAULT_8
	default "16" if NR_CPUS_DEFAULT_16
	default "32" if NR_CPUS_DEFAULT_32
	default "64" if NR_CPUS_DEFAULT_64
L
Linus Torvalds 已提交
1924 1925 1926 1927
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 for 32-bit
	  kernel and 64 for 64-bit kernels; the minimum value which makes
1928 1929
	  sense is 1 for Qemu (useful only for kernel debugging purposes)
	  and 2 for all others.
L
Linus Torvalds 已提交
1930 1931

	  This is purely to save memory - each supported CPU adds
1932 1933 1934
	  approximately eight kilobytes to the kernel image.  For best
	  performance should round up your number of processors to the next
	  power of two.
L
Linus Torvalds 已提交
1935

1936 1937
source "kernel/time/Kconfig"

1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948
#
# Timer Interrupt Frequency Configuration
#

choice
	prompt "Timer frequency"
	default HZ_250
	help
	 Allows the configuration of the timer frequency.

	config HZ_48
1949
		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

	config HZ_100
		bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ

	config HZ_128
		bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ

	config HZ_250
		bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ

	config HZ_256
		bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ

	config HZ_1000
		bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ

	config HZ_1024
		bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ

endchoice

config SYS_SUPPORTS_48HZ
	bool

config SYS_SUPPORTS_100HZ
	bool

config SYS_SUPPORTS_128HZ
	bool

config SYS_SUPPORTS_250HZ
	bool

config SYS_SUPPORTS_256HZ
	bool

config SYS_SUPPORTS_1000HZ
	bool

config SYS_SUPPORTS_1024HZ
	bool

config SYS_SUPPORTS_ARBIT_HZ
	bool
	default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
		     !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
		     !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
		     !SYS_SUPPORTS_1024HZ

config HZ
	int
	default 48 if HZ_48
	default 100 if HZ_100
	default 128 if HZ_128
	default 250 if HZ_250
	default 256 if HZ_256
	default 1000 if HZ_1000
	default 1024 if HZ_1024

R
Ralf Baechle 已提交
2009
source "kernel/Kconfig.preempt"
L
Linus Torvalds 已提交
2010 2011 2012

config MIPS_INSANE_LARGE
	bool "Support for large 64-bit configurations"
2013
	depends on CPU_R10000 && 64BIT
L
Linus Torvalds 已提交
2014 2015 2016 2017 2018 2019 2020
	help
	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
	  previous 64-bit processors which only supported 40 bit / 1TB. If you
	  need processes of more than 1TB virtual address space, say Y here.
	  This will result in additional memory usage, so it is not
	  recommended for normal users.

2021 2022 2023 2024 2025 2026
config KEXEC
	bool "Kexec system call (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
2027
	  but it is independent of the system firmware.   And like a reboot
2028 2029
	  you can start any kernel with it, not just Linux.

M
Matt LaPlante 已提交
2030
	  The name comes from the similarity to the exec system call.
2031 2032 2033 2034 2035 2036 2037 2038 2039

	  It is an ongoing process to be certain the hardware in a machine
	  is properly shutdown, so do not be surprised if this code does not
	  initially work for you.  It may help to enable device hotplugging
	  support.  As of this writing the exact hardware interface is
	  strongly in flux, so no good recommendation can be made.

config SECCOMP
	bool "Enable seccomp to safely compute untrusted bytecode"
2040
	depends on PROC_FS
2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054
	default y
	help
	  This kernel feature is useful for number crunching applications
	  that may need to compute untrusted bytecode during their
	  execution. By using pipes or other transports made available to
	  the process as file descriptors supporting the read/write
	  syscalls, it's possible to isolate those applications in
	  their own address space using seccomp. Once seccomp is
	  enabled via /proc/<pid>/seccomp, it cannot be disabled
	  and the task is only allowed to execute a few safe syscalls
	  defined by each seccomp mode.

	  If unsure, say Y. Only embedded should say N here.

2055 2056
endmenu

2057 2058 2059 2060 2061 2062 2063 2064
config LOCKDEP_SUPPORT
	bool
	default y

config STACKTRACE_SUPPORT
	bool
	default y

2065 2066
source "init/Kconfig"

2067 2068
source "kernel/Kconfig.freezer"

L
Linus Torvalds 已提交
2069 2070
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"

2071 2072
config HW_HAS_EISA
	bool
L
Linus Torvalds 已提交
2073 2074 2075 2076 2077 2078
config HW_HAS_PCI
	bool

config PCI
	bool "Support for PCI controller"
	depends on HW_HAS_PCI
2079
	select PCI_DOMAINS
L
Linus Torvalds 已提交
2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
	  say Y, otherwise N.

config PCI_DOMAINS
	bool

source "drivers/pci/Kconfig"

#
# ISA support is now enabled via select.  Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
# users to choose the right thing ...
#
config ISA
	bool

config EISA
	bool "EISA support"
2101
	depends on HW_HAS_EISA
L
Linus Torvalds 已提交
2102
	select ISA
2103
	select GENERIC_ISA_DMA
L
Linus Torvalds 已提交
2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

source "drivers/eisa/Kconfig"

config TC
	bool "TURBOchannel support"
	depends on MACH_DECSTATION
	help
	  TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
	  processors.  Documentation on writing device drivers for TurboChannel
	  is available at:
	  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.

#config ACCESSBUS
#	bool "Access.Bus support"
#	depends on TC

config MMU
	bool
	default y

2136 2137
config I8253
	bool
W
Wu Zhangjin 已提交
2138
	select MIPS_EXTERNAL_TIMER
2139

2140 2141 2142
config ZONE_DMA32
	bool

L
Linus Torvalds 已提交
2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157
source "drivers/pcmcia/Kconfig"

source "drivers/pci/hotplug/Kconfig"

endmenu

menu "Executable file formats"

source "fs/Kconfig.binfmt"

config TRAD_SIGNALS
	bool

config MIPS32_COMPAT
	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
2158
	depends on 64BIT
L
Linus Torvalds 已提交
2159 2160 2161 2162 2163 2164 2165 2166 2167 2168
	help
	  Select this option if you want Linux/MIPS 32-bit binary
	  compatibility. Since all software available for Linux/MIPS is
	  currently 32-bit you should say Y here.

config COMPAT
	bool
	depends on MIPS32_COMPAT
	default y

2169 2170 2171 2172 2173
config SYSVIPC_COMPAT
	bool
	depends on COMPAT && SYSVIPC
	default y

L
Linus Torvalds 已提交
2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198
config MIPS32_O32
	bool "Kernel support for o32 binaries"
	depends on MIPS32_COMPAT
	help
	  Select this option if you want to run o32 binaries.  These are pure
	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
	  existing binaries are in this format.

	  If unsure, say Y.

config MIPS32_N32
	bool "Kernel support for n32 binaries"
	depends on MIPS32_COMPAT
	help
	  Select this option if you want to run n32 binaries.  These are
	  64-bit binaries using 32-bit quantities for addressing and certain
	  data that would normally be 64-bit.  They are used in special
	  cases.

	  If unsure, say N.

config BINFMT_ELF32
	bool
	default y if MIPS32_O32 || MIPS32_N32

2199 2200 2201 2202
endmenu

menu "Power management options"

W
Wu Zhangjin 已提交
2203 2204
config ARCH_HIBERNATION_POSSIBLE
	def_bool y
2205
	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
W
Wu Zhangjin 已提交
2206

J
Johannes Berg 已提交
2207 2208
config ARCH_SUSPEND_POSSIBLE
	def_bool y
2209
	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
J
Johannes Berg 已提交
2210

2211
source "kernel/power/Kconfig"
R
Rodolfo Giometti 已提交
2212

L
Linus Torvalds 已提交
2213 2214
endmenu

W
Wu Zhangjin 已提交
2215 2216
source "arch/mips/kernel/cpufreq/Kconfig"

2217 2218
source "net/Kconfig"

L
Linus Torvalds 已提交
2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229
source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/mips/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"