Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 edcaf1a6 编写于 作者: A Atsushi Nemoto 提交者： Ralf Baechle
浏览文件
操作

[MIPS] TXx9: Make single kernel can support multiple boards 

Make single kernel can be used on RBTX4927/37/38.  Also make
some SoC-specific code independent from board-specific code.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 76689156
隐藏空白更改
内联 并排
Showing with 520 addition and 585 deletion
arch/mips/Kconfig
浏览文件 @ edcaf1a6
......@@ -550,66 +550,11 @@ config SNI_RM
Technology and now in turn merged with Fujitsu. Say Y here to
support this machine type.
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
select CEVT_TXX9
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX39XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config MACH_TX39XX
bool "Toshiba TX39 series based machines"
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4927 processor. Say Y here to
support this machine type
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
help
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
config MACH_TX49XX
bool "Toshiba TX49 series based machines"
config WR_PPMC
bool "Wind River PPMC board"
......@@ -887,10 +832,6 @@ config PCI_GT64XXX_PCI0
config NO_EXCEPT_FILL
bool
config MIPS_TX3927
bool
select HAS_TXX9_SERIAL
config MIPS_RM9122
bool
select SERIAL_RM9000
......
arch/mips/Makefile
浏览文件 @ edcaf1a6
......@@ -550,30 +550,31 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80030000
endif
all-$(CONFIG_SNI_RM) := vmlinux.ecoff
#
# Common TXx9
#
core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/
cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-jmr3927
load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000
core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/
cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000
#
# Toshiba JMR-TX3927 board
#
core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ \
arch/mips/txx9/generic/
cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000
core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/
#
# Toshiba RBTX4927 board or
# Toshiba RBTX4937 board
#
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/generic/
cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
#
# Toshiba RBTX4938 board
#
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/generic/
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
cflags-y += -Iinclude/asm-mips/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
......
arch/mips/pci/Makefile
浏览文件 @ edcaf1a6
......@@ -11,11 +11,10 @@ obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
#
......@@ -44,8 +43,10 @@ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o pci-tx4927.o pci-tx4938.o
obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o pci-tx4938.o
obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o
obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o
obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
arch/mips/pci/fixup-jmr3927.c
浏览文件 @ edcaf1a6
......@@ -31,7 +31,7 @@
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned char irq = pin;
......@@ -77,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
irq = JMR3927_IRQ_ETHER0;
return irq;
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/fixup-rbtx4927.c
浏览文件 @ edcaf1a6
......@@ -36,7 +36,7 @@
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4927.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned char irq = pin;
......@@ -71,9 +71,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
return irq;
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/fixup-rbtx4938.c
浏览文件 @ edcaf1a6
......@@ -13,7 +13,7 @@
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4938.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = tx4938_pcic1_map_irq(dev, slot);
......@@ -51,12 +51,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
return irq;
}
/*
* Do platform specific device initialization at pci_enable_device() time
*/
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/txx9/Kconfig
浏览文件 @ edcaf1a6
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
depends on MACH_TX39XX
select SOC_TX3927
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
depends on MACH_TX49XX
select SOC_TX4927
help
This Toshiba board is based on the TX4927 processor. Say Y here to
support this machine type
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
depends on MACH_TX49XX
select SOC_TX4938
help
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
config SOC_TX3927
bool
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX39XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4927
bool
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4938
bool
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX)
depends on PCI && (MACH_TX39XX || MACH_TX49XX)
select I8259
config PICMG_PCI_BACKPLANE_DEFAULT
bool "Support for PICMG PCI Backplane"
depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX)
depends on PCI && (MACH_TX39XX || MACH_TX49XX)
default y if !TOSHIBA_FPCIB0
if TOSHIBA_RBTX4938
......
arch/mips/txx9/generic/Makefile
浏览文件 @ edcaf1a6
......@@ -4,8 +4,8 @@
obj-y += setup.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o
obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o
obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o irq_tx4927.o
obj-$(CONFIG_SOC_TX4938) += mem_tx4938.o irq_tx4938.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
obj-$(CONFIG_KGDB) += dbgio.o
......
arch/mips/txx9/generic/irq_tx4927.c
浏览文件 @ edcaf1a6
......@@ -26,39 +26,12 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#ifdef CONFIG_TOSHIBA_RBTX4927
#include <asm/txx9/rbtx4927.h>
#endif
#include <asm/txx9/tx4927.h>
void __init tx4927_irq_init(void)
{
mips_cpu_irq_init();
txx9_irq_init(TX4927_IRC_REG);
set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & STATUSF_IP7) /* cpu timer */
do_IRQ(TX4927_IRQ_CPU_TIMER);
else if (pending & STATUSF_IP2) { /* tx4927 pic */
int irq = txx9_irq();
#ifdef CONFIG_TOSHIBA_RBTX4927
if (irq == TX4927_IRQ_NEST_EXT_ON_PIC)
irq = toshiba_rbtx4927_irq_nested(irq);
#endif
if (unlikely(irq < 0)) {
spurious_interrupt();
return;
}
do_IRQ(irq);
} else if (pending & STATUSF_IP0) /* user line 0 */
do_IRQ(TX4927_IRQ_USER0);
else if (pending & STATUSF_IP1) /* user line 1 */
do_IRQ(TX4927_IRQ_USER1);
else
spurious_interrupt();
set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
handle_simple_irq);
}
arch/mips/txx9/generic/irq_tx4938.c
浏览文件 @ edcaf1a6
......@@ -14,35 +14,12 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/txx9/rbtx4938.h>
#include <asm/txx9/tx4938.h>
void __init
tx4938_irq_init(void)
void __init tx4938_irq_init(void)
{
mips_cpu_irq_init();
txx9_irq_init(TX4938_IRC_REG);
set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
}
int toshiba_rbtx4938_irq_nested(int irq);
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status();
if (pending & STATUSF_IP7)
do_IRQ(TX4938_IRQ_CPU_TIMER);
else if (pending & STATUSF_IP2) {
int irq = txx9_irq();
if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0))
irq = toshiba_rbtx4938_irq_nested(irq);
if (irq >= 0)
do_IRQ(irq);
else
spurious_interrupt();
} else if (pending & STATUSF_IP1)
do_IRQ(TX4938_IRQ_USER1);
else if (pending & STATUSF_IP0)
do_IRQ(TX4938_IRQ_USER0);
set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
handle_simple_irq);
}
arch/mips/txx9/generic/pci.c
浏览文件 @ edcaf1a6
......@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/io.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#ifdef CONFIG_TOSHIBA_FPCIB0
#include <linux/interrupt.h>
......@@ -375,3 +376,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
#endif
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
arch/mips/txx9/generic/setup.c
浏览文件 @ edcaf1a6
......@@ -14,7 +14,16 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <asm/bootinfo.h>
#include <asm/txx9/generic.h>
#ifdef CONFIG_CPU_TX49XX
#include <asm/txx9/tx4938.h>
#endif
/* EBUSC settings of TX4927, etc. */
struct resource txx9_ce_res[8];
......@@ -49,3 +58,163 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
unsigned int txx9_master_clock;
unsigned int txx9_cpu_clock;
unsigned int txx9_gbus_clock;
/* Minimum CLK support */
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "spi-baseclk"))
return (struct clk *)(txx9_gbus_clock / 2 / 4);
if (!strcmp(id, "imbus_clk"))
return (struct clk *)(txx9_gbus_clock / 2);
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return (unsigned long)clk;
}
EXPORT_SYMBOL(clk_get_rate);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
extern struct txx9_board_vec jmr3927_vec;
extern struct txx9_board_vec rbtx4927_vec;
extern struct txx9_board_vec rbtx4937_vec;
extern struct txx9_board_vec rbtx4938_vec;
/* board definitions */
static struct txx9_board_vec *board_vecs[] __initdata = {
#ifdef CONFIG_TOSHIBA_JMR3927
&jmr3927_vec,
#endif
#ifdef CONFIG_TOSHIBA_RBTX4927
&rbtx4927_vec,
&rbtx4937_vec,
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938
&rbtx4938_vec,
#endif
};
struct txx9_board_vec *txx9_board_vec __initdata;
static char txx9_system_type[32];
void __init prom_init_cmdline(void)
{
int argc = (int)fw_arg0;
char **argv = (char **)fw_arg1;
int i; /* Always ignore the "-c" at argv[0] */
/* ignore all built-in args if any f/w args given */
if (argc > 1)
*arcs_cmdline = '\0';
for (i = 1; i < argc; i++) {
if (i != 1)
strcat(arcs_cmdline, " ");
strcat(arcs_cmdline, argv[i]);
}
}
void __init prom_init(void)
{
int i;
#ifdef CONFIG_CPU_TX39XX
mips_machtype = MACH_TOSHIBA_JMR3927;
#endif
#ifdef CONFIG_CPU_TX49XX
switch (TX4938_REV_PCODE()) {
case 0x4927:
mips_machtype = MACH_TOSHIBA_RBTX4927;
break;
case 0x4937:
mips_machtype = MACH_TOSHIBA_RBTX4937;
break;
case 0x4938:
mips_machtype = MACH_TOSHIBA_RBTX4938;
break;
}
#endif
for (i = 0; i < ARRAY_SIZE(board_vecs); i++) {
if (board_vecs[i]->type == mips_machtype) {
txx9_board_vec = board_vecs[i];
strcpy(txx9_system_type, txx9_board_vec->system);
return txx9_board_vec->prom_init();
}
}
}
void __init prom_free_prom_memory(void)
{
}
const char *get_system_type(void)
{
return txx9_system_type;
}
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
/* wrappers */
void __init plat_mem_setup(void)
{
txx9_board_vec->mem_setup();
}
void __init arch_init_irq(void)
{
txx9_board_vec->irq_setup();
}
void __init plat_time_init(void)
{
txx9_board_vec->time_init();
}
static int __init _txx9_arch_init(void)
{
if (txx9_board_vec->arch_init)
txx9_board_vec->arch_init();
return 0;
}
arch_initcall(_txx9_arch_init);
static int __init _txx9_device_init(void)
{
if (txx9_board_vec->device_init)
txx9_board_vec->device_init();
return 0;
}
device_initcall(_txx9_device_init);
int (*txx9_irq_dispatch)(int pending);
asmlinkage void plat_irq_dispatch(void)
{
int pending = read_c0_status() & read_c0_cause() & ST0_IM;
int irq = txx9_irq_dispatch(pending);
if (likely(irq >= 0))
do_IRQ(irq);
else
spurious_interrupt();
}
arch/mips/txx9/jmr3927/Makefile
浏览文件 @ edcaf1a6
......@@ -2,7 +2,7 @@
# Makefile for TOSHIBA JMR-TX3927 board
#
obj-y += prom.o init.o irq.o setup.o
obj-y += prom.o irq.o setup.o
obj-$(CONFIG_KGDB) += kgdb_io.o
EXTRA_CFLAGS += -Werror
arch/mips/txx9/jmr3927/init.c 已删除 100644 → 0
浏览文件 @ 76689156
/*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ahennessy@mvista.com
*
* arch/mips/jmr3927/common/init.c
*
* Copyright (C) 2000-2001 Toshiba Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <asm/txx9/jmr3927.h>
extern void __init prom_init_cmdline(void);
const char *get_system_type(void)
{
return "Toshiba"
#ifdef CONFIG_TOSHIBA_JMR3927
" JMR_TX3927"
#endif
;
}
extern void puts(const char *cp);
void __init prom_init(void)
{
#ifdef CONFIG_TOSHIBA_JMR3927
/* CCFG */
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
puts("Warning: TX3927 TLB off\n");
#endif
prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
}
arch/mips/txx9/jmr3927/irq.c
浏览文件 @ edcaf1a6
......@@ -39,6 +39,7 @@
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
#if JMR3927_IRQ_END > NR_IRQS
......@@ -77,37 +78,30 @@ static void unmask_irq_ioc(unsigned int irq)
(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned long cp0_cause = read_c0_cause();
int irq;
if ((cp0_cause & CAUSEF_IP7) == 0)
return;
irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
do_IRQ(irq + JMR3927_IRQ_IRC);
}
static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id)
static int jmr3927_ioc_irqroute(void)
{
unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
int i;
for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
if (istat & (1 << i)) {
irq = JMR3927_IRQ_IOC + i;
do_IRQ(irq);
}
if (istat & (1 << i))
return JMR3927_IRQ_IOC + i;
}
return IRQ_HANDLED;
return -1;
}
static struct irqaction ioc_action = {
.handler = jmr3927_ioc_interrupt,
.mask = CPU_MASK_NONE,
.name = "IOC",
};
static int jmr3927_irq_dispatch(int pending)
{
int irq;
if ((pending & CAUSEF_IP7) == 0)
return -1;
irq = (pending >> CAUSEB_IP2) & 0x0f;
irq += JMR3927_IRQ_IRC;
if (irq == JMR3927_IRQ_IOCINT)
irq = jmr3927_ioc_irqroute();
return irq;
}
#ifdef CONFIG_PCI
static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
......@@ -127,8 +121,9 @@ static struct irqaction pcierr_action = {
static void __init jmr3927_irq_init(void);
void __init arch_init_irq(void)
void __init jmr3927_irq_setup(void)
{
txx9_irq_dispatch = jmr3927_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* all IRC interrupt mode are Low Active. */
......@@ -146,7 +141,7 @@ void __init arch_init_irq(void)
jmr3927_irq_init();
/* setup IOC interrupt 1 (PCI, MODEM) */
setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
#ifdef CONFIG_PCI
setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
......
arch/mips/txx9/jmr3927/prom.c
浏览文件 @ edcaf1a6
......@@ -35,42 +35,10 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/txx9/tx3927.h>
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
void __init prom_init_cmdline(void)
{
char *cp;
int actr;
int prom_argc = fw_arg0;
char **prom_argv = (char **) fw_arg1;
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
while(actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
actr++;
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
*cp = '\0';
}
void __init prom_free_prom_memory(void)
{
}
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
#define TIMEOUT 0xffffff
......@@ -96,3 +64,13 @@ puts(const char *cp)
prom_putchar('\r');
prom_putchar('\n');
}
void __init jmr3927_prom_init(void)
{
/* CCFG */
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
puts("Warning: TX3927 TLB off\n");
prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
}
arch/mips/txx9/jmr3927/setup.c
浏览文件 @ edcaf1a6
......@@ -34,15 +34,16 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/serial_core.h>
#endif
#include <asm/bootinfo.h>
#include <asm/txx9tmr.h>
#include <asm/txx9pio.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
......@@ -83,7 +84,7 @@ static void jmr3927_machine_power_off(void)
while (1);
}
void __init plat_time_init(void)
static void __init jmr3927_time_init(void)
{
txx9_clockevent_init(TX3927_TMR_REG(0),
TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
......@@ -97,7 +98,7 @@ void __init plat_time_init(void)
extern char * __init prom_getcmdline(void);
static void jmr3927_board_init(void);
void __init plat_mem_setup(void)
static void __init jmr3927_mem_setup(void)
{
char *argptr;
......@@ -233,6 +234,8 @@ static void __init tx3927_setup(void)
{
int i;
txx9_cpu_clock = JMR3927_CORECLK;
txx9_gbus_clock = JMR3927_GBUSCLK;
/* SDRAMC are configured by PROM */
/* ROMC */
......@@ -336,7 +339,6 @@ static int __init jmr3927_rtc_init(void)
dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(jmr3927_rtc_init);
/* Watchdog support */
......@@ -356,36 +358,22 @@ static int __init jmr3927_wdt_init(void)
{
return txx9_wdt_init(TX3927_TMR_REG(2));
}
device_initcall(jmr3927_wdt_init);
/* Minimum CLK support */
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "imbus_clk"))
return (struct clk *)JMR3927_IMCLK;
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
static void __init jmr3927_device_init(void)
{
jmr3927_rtc_init();
jmr3927_wdt_init();
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return (unsigned long)clk;
}
EXPORT_SYMBOL(clk_get_rate);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
struct txx9_board_vec jmr3927_vec __initdata = {
.type = MACH_TOSHIBA_JMR3927,
.system = "Toshiba JMR_TX3927",
.prom_init = jmr3927_prom_init,
.mem_setup = jmr3927_mem_setup,
.irq_setup = jmr3927_irq_setup,
.time_init = jmr3927_time_init,
.device_init = jmr3927_device_init,
#ifdef CONFIG_PCI
.pci_map_irq = jmr3927_pci_map_irq,
#endif
};
arch/mips/txx9/rbtx4927/irq.c
浏览文件 @ edcaf1a6
......@@ -111,17 +111,10 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4927.h>
#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0
#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7
#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */
#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */
#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC
#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2)
static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
......@@ -136,34 +129,25 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
int toshiba_rbtx4927_irq_nested(int sw_irq)
static int toshiba_rbtx4927_irq_nested(int sw_irq)
{
u8 level3;
level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
if (level3)
sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1;
sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
return (sw_irq);
}
static struct irqaction toshiba_rbtx4927_irq_ioc_action = {
.handler = no_action,
.flags = IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = TOSHIBA_RBTX4927_IOC_NAME
};
static void __init toshiba_rbtx4927_irq_ioc_init(void)
{
int i;
for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG;
i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++)
for (i = RBTX4927_IRQ_IOC;
i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
handle_level_irq);
setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC,
&toshiba_rbtx4927_irq_ioc_action);
set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq);
}
static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
......@@ -171,7 +155,7 @@ static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
unsigned char v;
v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
v |= (1 << (irq - RBTX4927_IRQ_IOC));
writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
}
......@@ -180,15 +164,34 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
unsigned char v;
v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
mmiowb();
}
void __init arch_init_irq(void)
static int rbtx4927_irq_dispatch(int pending)
{
extern void tx4927_irq_init(void);
int irq;
if (pending & STATUSF_IP7) /* cpu timer */
irq = MIPS_CPU_IRQ_BASE + 7;
else if (pending & STATUSF_IP2) { /* tx4927 pic */
irq = txx9_irq();
if (irq == RBTX4927_IRQ_IOCINT)
irq = toshiba_rbtx4927_irq_nested(irq);
} else if (pending & STATUSF_IP0) /* user line 0 */
irq = MIPS_CPU_IRQ_BASE + 0;
else if (pending & STATUSF_IP1) /* user line 1 */
irq = MIPS_CPU_IRQ_BASE + 1;
else
irq = -1;
return irq;
}
void __init rbtx4927_irq_setup(void)
{
txx9_irq_dispatch = rbtx4927_irq_dispatch;
tx4927_irq_init();
toshiba_rbtx4927_irq_ioc_init();
/* Onboard 10M Ether: High Active */
......
arch/mips/txx9/rbtx4927/prom.c
浏览文件 @ edcaf1a6
......@@ -30,62 +30,16 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/txx9/tx4927.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4927.h>
void __init prom_init_cmdline(void)
{
int argc = (int) fw_arg0;
char **argv = (char **) fw_arg1;
int i; /* Always ignore the "-c" at argv[0] */
/* ignore all built-in args if any f/w args given */
if (argc > 1) {
*arcs_cmdline = '\0';
}
for (i = 1; i < argc; i++) {
if (i != 1) {
strcat(arcs_cmdline, " ");
}
strcat(arcs_cmdline, argv[i]);
}
}
void __init prom_init(void)
void __init rbtx4927_prom_init(void)
{
extern int tx4927_get_mem_size(void);
extern char* toshiba_name;
int msize;
prom_init_cmdline();
if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
mips_machtype = MACH_TOSHIBA_RBTX4927;
toshiba_name = "TX4927";
} else {
mips_machtype = MACH_TOSHIBA_RBTX4937;
toshiba_name = "TX4937";
}
msize = tx4927_get_mem_size();
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
}
void __init prom_free_prom_memory(void)
{
}
const char *get_system_type(void)
{
return "Toshiba RBTX4927/RBTX4937";
}
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
arch/mips/txx9/rbtx4927/setup.c
浏览文件 @ edcaf1a6
......@@ -49,7 +49,6 @@
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <asm/bootinfo.h>
......@@ -76,8 +75,6 @@ char *prom_getcmdline(void);
static int tx4927_ccfg_toeon = 1;
char *toshiba_name = "";
#ifdef CONFIG_PCI
static void __init tx4927_pci_setup(void)
{
......@@ -171,15 +168,15 @@ static void __init tx4937_pci_setup(void)
}
}
static int __init rbtx4927_arch_init(void)
static void __init rbtx4927_arch_init(void)
{
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
tx4937_pci_setup();
else
tx4927_pci_setup();
return 0;
}
arch_initcall(rbtx4927_arch_init);
#else
#define rbtx4927_arch_init NULL
#endif /* CONFIG_PCI */
static void __noreturn wait_forever(void)
......@@ -223,14 +220,12 @@ void toshiba_rbtx4927_power_off(void)
/* no return */
}
void __init plat_mem_setup(void)
static void __init rbtx4927_mem_setup(void)
{
int i;
u32 cp0_config;
char *argptr;
printk("CPU is %s\n", toshiba_name);
/* f/w leaves this on at startup */
clear_c0_status(ST0_ERL);
......@@ -323,7 +318,7 @@ void __init plat_mem_setup(void)
req.iotype = UPIO_MEM;
req.membase = (char *)(0xff1ff300 + i * 0x100);
req.mapbase = 0xff1ff300 + i * 0x100;
req.irq = TX4927_IRQ_PIC_BEG + 8 + i;
req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
req.uartclk = 50000000;
early_serial_txx9_setup(&req);
......@@ -352,7 +347,7 @@ void __init plat_mem_setup(void)
#endif
}
void __init plat_time_init(void)
static void __init rbtx4927_time_init(void)
{
mips_hpt_frequency = txx9_cpu_clock / 2;
if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
......@@ -372,7 +367,6 @@ static int __init toshiba_rbtx4927_rtc_init(void)
platform_device_register_simple("rtc-ds1742", -1, &res, 1);
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(toshiba_rbtx4927_rtc_init);
static int __init rbtx4927_ne_init(void)
{
......@@ -391,7 +385,6 @@ static int __init rbtx4927_ne_init(void)
res, ARRAY_SIZE(res));
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(rbtx4927_ne_init);
/* Watchdog support */
......@@ -411,36 +404,37 @@ static int __init rbtx4927_wdt_init(void)
{
return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
}
device_initcall(rbtx4927_wdt_init);
/* Minimum CLK support */
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "imbus_clk"))
return (struct clk *)50000000;
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
rbtx4927_ne_init();
rbtx4927_wdt_init();
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return (unsigned long)clk;
}
EXPORT_SYMBOL(clk_get_rate);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
struct txx9_board_vec rbtx4927_vec __initdata = {
.type = MACH_TOSHIBA_RBTX4927,
.system = "Toshiba RBTX4927",
.prom_init = rbtx4927_prom_init,
.mem_setup = rbtx4927_mem_setup,
.irq_setup = rbtx4927_irq_setup,
.time_init = rbtx4927_time_init,
.device_init = rbtx4927_device_init,
.arch_init = rbtx4927_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4927_pci_map_irq,
#endif
};
struct txx9_board_vec rbtx4937_vec __initdata = {
.type = MACH_TOSHIBA_RBTX4937,
.system = "Toshiba RBTX4937",
.prom_init = rbtx4927_prom_init,
.mem_setup = rbtx4927_mem_setup,
.irq_setup = rbtx4927_irq_setup,
.time_init = rbtx4927_time_init,
.device_init = rbtx4927_device_init,
.arch_init = rbtx4927_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4927_pci_map_irq,
#endif
};
arch/mips/txx9/rbtx4938/irq.c
浏览文件 @ edcaf1a6
......@@ -66,6 +66,8 @@ IRQ Device
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsregs.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4938.h>
static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
......@@ -80,26 +82,17 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
.unmask = toshiba_rbtx4938_irq_ioc_enable,
};
int
toshiba_rbtx4938_irq_nested(int sw_irq)
static int toshiba_rbtx4938_irq_nested(int sw_irq)
{
u8 level3;
level3 = readb(rbtx4938_imstat_addr);
if (level3)
/* must use fls so onboard ATA has priority */
sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
return sw_irq;
}
static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
.handler = no_action,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = TOSHIBA_RBTX4938_IOC_NAME,
};
/**********************************************************************************/
/* Functions for ioc */
/**********************************************************************************/
......@@ -108,13 +101,12 @@ toshiba_rbtx4938_irq_ioc_init(void)
{
int i;
for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
for (i = RBTX4938_IRQ_IOC;
i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
handle_level_irq);
setup_irq(RBTX4938_IRQ_IOCINT,
&toshiba_rbtx4938_irq_ioc_action);
set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
}
static void
......@@ -123,7 +115,7 @@ toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
unsigned char v;
v = readb(rbtx4938_imask_addr);
v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
v |= (1 << (irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
......@@ -134,15 +126,33 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
unsigned char v;
v = readb(rbtx4938_imask_addr);
v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
void __init arch_init_irq(void)
static int rbtx4938_irq_dispatch(int pending)
{
extern void tx4938_irq_init(void);
int irq;
if (pending & STATUSF_IP7)
irq = MIPS_CPU_IRQ_BASE + 7;
else if (pending & STATUSF_IP2) {
irq = txx9_irq();
if (irq == RBTX4938_IRQ_IOCINT)
irq = toshiba_rbtx4938_irq_nested(irq);
} else if (pending & STATUSF_IP1)
irq = MIPS_CPU_IRQ_BASE + 0;
else if (pending & STATUSF_IP0)
irq = MIPS_CPU_IRQ_BASE + 1;
else
irq = -1;
return irq;
}
void __init rbtx4938_irq_setup(void)
{
txx9_irq_dispatch = rbtx4938_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* all IRC interrupt mode are Low Active. */
......
arch/mips/txx9/rbtx4938/prom.c
浏览文件 @ edcaf1a6
......@@ -11,34 +11,12 @@
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/txx9/tx4938.h>
void __init prom_init_cmdline(void)
{
int argc = (int) fw_arg0;
char **argv = (char **) fw_arg1;
int i;
/* ignore all built-in args if any f/w args given */
if (argc > 1) {
*arcs_cmdline = '\0';
}
for (i = 1; i < argc; i++) {
if (i != 1) {
strcat(arcs_cmdline, " ");
}
strcat(arcs_cmdline, argv[i]);
}
}
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4938.h>
void __init prom_init(void)
void __init rbtx4938_prom_init(void)
{
extern int tx4938_get_mem_size(void);
int msize;
......@@ -48,25 +26,4 @@ void __init prom_init(void)
msize = tx4938_get_mem_size();
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
return;
}
void __init prom_free_prom_memory(void)
{
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
{
return;
}
const char *get_system_type(void)
{
return "Toshiba RBTX4938";
}
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
arch/mips/txx9/rbtx4938/setup.c
浏览文件 @ edcaf1a6
......@@ -17,7 +17,6 @@
#include <linux/console.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <asm/reboot.h>
......@@ -147,9 +146,9 @@ static void __init rbtx4938_pci_setup(void)
#define SEEPROM3_CS 1 /* IOC */
#define SRTC_CS 2 /* IOC */
#ifdef CONFIG_PCI
static int __init rbtx4938_ethaddr_init(void)
{
#ifdef CONFIG_PCI
unsigned char dat[17];
unsigned char sum;
int i;
......@@ -179,10 +178,9 @@ static int __init rbtx4938_ethaddr_init(void)
platform_device_add(pdev))
platform_device_put(pdev);
}
#endif /* CONFIG_PCI */
return 0;
}
device_initcall(rbtx4938_ethaddr_init);
#endif /* CONFIG_PCI */
static void __init rbtx4938_spi_setup(void)
{
......@@ -366,7 +364,7 @@ void __init tx4938_board_setup(void)
#endif
}
void __init plat_time_init(void)
static void __init rbtx4938_time_init(void)
{
mips_hpt_frequency = txx9_cpu_clock / 2;
if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
......@@ -375,7 +373,7 @@ void __init plat_time_init(void)
txx9_gbus_clock / 2);
}
void __init plat_mem_setup(void)
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
char *argptr;
......@@ -496,7 +494,6 @@ static int __init rbtx4938_ne_init(void)
res, ARRAY_SIZE(res));
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(rbtx4938_ne_init);
/* GPIO support */
......@@ -587,14 +584,13 @@ static int __init rbtx4938_spi_init(void)
return 0;
}
static int __init rbtx4938_arch_init(void)
static void __init rbtx4938_arch_init(void)
{
txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
gpiochip_add(&rbtx4938_spi_gpio_chip);
rbtx4938_pci_setup();
return rbtx4938_spi_init();
rbtx4938_spi_init();
}
arch_initcall(rbtx4938_arch_init);
/* Watchdog support */
......@@ -614,38 +610,24 @@ static int __init rbtx4938_wdt_init(void)
{
return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
}
device_initcall(rbtx4938_wdt_init);
/* Minimum CLK support */
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "spi-baseclk"))
return (struct clk *)(txx9_gbus_clock / 2 / 4);
if (!strcmp(id, "imbus_clk"))
return (struct clk *)(txx9_gbus_clock / 2);
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
static void __init rbtx4938_device_init(void)
{
return (unsigned long)clk;
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
rbtx4938_wdt_init();
}
EXPORT_SYMBOL(clk_get_rate);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
struct txx9_board_vec rbtx4938_vec __initdata = {
.type = MACH_TOSHIBA_RBTX4938,
.system = "Toshiba RBTX4938",
.prom_init = rbtx4938_prom_init,
.mem_setup = rbtx4938_mem_setup,
.irq_setup = rbtx4938_irq_setup,
.time_init = rbtx4938_time_init,
.device_init = rbtx4938_device_init,
.arch_init = rbtx4938_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4938_pci_map_irq,
#endif
};
include/asm-mips/txx9/generic.h
浏览文件 @ edcaf1a6
......@@ -20,4 +20,22 @@ extern unsigned int txx9_master_clock;
extern unsigned int txx9_cpu_clock;
extern unsigned int txx9_gbus_clock;
struct pci_dev;
struct txx9_board_vec {
unsigned long type;
const char *system;
void (*prom_init)(void);
void (*mem_setup)(void);
void (*irq_setup)(void);
void (*time_init)(void);
void (*arch_init)(void);
void (*device_init)(void);
#ifdef CONFIG_PCI
int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
#endif
};
extern struct txx9_board_vec *txx9_board_vec;
extern int (*txx9_irq_dispatch)(int pending);
void prom_init_cmdline(void);
#endif /* __ASM_TXX9_GENERIC_H */
include/asm-mips/txx9/jmr3927.h
浏览文件 @ edcaf1a6
......@@ -174,4 +174,9 @@
* INT[3:0]
*/
void jmr3927_prom_init(void);
void jmr3927_irq_setup(void);
struct pci_dev;
int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#endif /* __ASM_TXX9_JMR3927_H */
include/asm-mips/txx9/rbtx4927.h
浏览文件 @ edcaf1a6
......@@ -46,12 +46,16 @@
#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB)
#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA)
#define RBTX4927_IRQ_IOC (TX4927_IRQ_PIC_BEG + TX4927_NUM_IR)
#define RBTX4927_NR_IRQ_IOC 8 /* IOC */
#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR)
#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID)
#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC)
#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB)
#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA)
#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1))
#ifdef CONFIG_PCI
#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO
#else
......@@ -65,8 +69,11 @@
#define RBTX4927_SW_RESET_ENABLE_SET 0x01
#define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET)
#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5)
#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3))
int toshiba_rbtx4927_irq_nested(int sw_irq);
void rbtx4927_prom_init(void);
void rbtx4927_irq_setup(void);
struct pci_dev;
int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#endif /* __ASM_TXX9_RBTX4927_H */
include/asm-mips/txx9/rbtx4938.h
浏览文件 @ edcaf1a6
......@@ -101,35 +101,12 @@
* that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new
* IRQ hardware is supported.
*/
#define RBTX4938_NR_IRQ_LOCAL 8
#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */
#define RBTX4938_NR_IRQ_IOC 8
#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE
#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1)
#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE
#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1)
#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2)
#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2)
#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0)
#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1)
#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7)
#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0
#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7
#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */
#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */
#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG
#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL)
#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC)
#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE
#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR)
#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0)
#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1)
#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT)
#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT)
#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
......@@ -157,11 +134,16 @@
/* IOC (PCI, etc) */
#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC)
#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0))
/* Onboard 10M Ether */
#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1)
#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1))
#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER)
void rbtx4938_prom_init(void);
void rbtx4938_irq_setup(void);
struct pci_dev;
int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#endif /* __ASM_TXX9_RBTX4938_H */
include/asm-mips/txx9/tx4927.h
浏览文件 @ edcaf1a6
......@@ -32,20 +32,6 @@
#include <asm/txx9irq.h>
#include <asm/txx9/tx4927pcic.h>
#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE
#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1)
#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE
#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1)
#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0)
#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1)
#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2)
#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7)
#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3)
#define TX4927_SDRAMC_REG 0xff1f8000
#define TX4927_EBUSC_REG 0xff1f9000
#define TX4927_PCIC_REG 0xff1fd000
......@@ -54,10 +40,14 @@
#define TX4927_NR_TMR 3
#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100)
#define TX4927_IR_INT(n) (2 + (n))
#define TX4927_IR_SIO(n) (8 + (n))
#define TX4927_IR_PCIC 16
#define TX4927_IR_PCIERR 22
#define TX4927_NUM_IR 32
#define TX4927_IRC_INT 2 /* IP[2] in Status register */
struct tx4927_sdramc_reg {
volatile unsigned long long cr[4];
volatile unsigned long long unused0[4];
......@@ -224,5 +214,6 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
int tx4927_report_pciclk(void);
int tx4927_pciclk66_setup(void);
void tx4927_irq_init(void);
#endif /* __ASM_TXX9_TX4927_H */
include/asm-mips/txx9/tx4938.h
浏览文件 @ edcaf1a6
......@@ -18,11 +18,6 @@
#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr))
#define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b)
#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG
#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC)
#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR)
#define TX4938_PCIIO_0 0x10000000
#define TX4938_PCIIO_1 0x01010000
#define TX4938_PCIMEM_0 0x08000000
......@@ -271,6 +266,8 @@ struct tx4938_ccfg_reg {
#define TX4938_IR_ETH0 TX4938_IR_INT(4)
#define TX4938_IR_ETH1 TX4938_IR_INT(3)
#define TX4938_IRC_INT 2 /* IP[2] in Status register */
/*
* CCFG
*/
......@@ -463,5 +460,6 @@ void tx4938_report_pci1clk(void);
int tx4938_pciclk66_setup(void);
struct pci_dev;
int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
void tx4938_irq_init(void);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或