提交 940f6b48 编写于 作者: R Ralf Baechle

[MIPS] Only build r4k clocksource for systems that work ok with it.

In particular as-is it's not suited for multicore and mutiprocessors
systems where there is on guarantee that the counter are synchronized
or running from the same clock at all.  This broke Sibyte and probably
others since the "[MIPS] Handle R4000/R4400 mfc0 from count register."
commit.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 5aa85c9f
......@@ -22,6 +22,7 @@ config MACH_ALCHEMY
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -49,6 +50,7 @@ config BASLER_EXCITE_PROTOTYPE
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -66,6 +68,7 @@ config BCM47XX
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -85,6 +88,7 @@ config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select NO_IOPORT
select IRQ_CPU
......@@ -117,6 +121,7 @@ config MACH_JAZZ
select ARC32
select ARCH_MAY_HAVE_PC_FDC
select CEVT_R4K
select CSRC_R4K
select GENERIC_ISA_DMA
select IRQ_CPU
select I8253
......@@ -137,6 +142,7 @@ config MACH_JAZZ
config LASAT
bool "LASAT Networks platforms"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
......@@ -154,6 +160,7 @@ config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_LOONGSON2
select DMA_NONCOHERENT
select BOOT_ELF32
......@@ -179,6 +186,7 @@ config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
......@@ -210,6 +218,7 @@ config MIPS_MALTA
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
......@@ -241,6 +250,7 @@ config MIPS_MALTA
config MIPS_SEAD
bool "MIPS SEAD board"
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
......@@ -260,6 +270,7 @@ config MIPS_SEAD
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
......@@ -278,6 +289,7 @@ config MIPS_SIM
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -293,6 +305,7 @@ config MARKEINS
config MACH_VR41XX
bool "NEC VR4100 series based machines"
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
......@@ -330,6 +343,7 @@ config PMC_MSP
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
select CEVT_R4K
select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -351,6 +365,7 @@ config PMC_YOSEMITE
config QEMU
bool "Qemu"
select CEVT_R4K
select CSRC_R4K
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
......@@ -382,6 +397,7 @@ config SGI_IP22
select ARC32
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_EISA
select I8253
......@@ -427,6 +443,7 @@ config SGI_IP32
select ARC32
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -556,6 +573,7 @@ config SNI_RM
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HW_HAS_EISA
......@@ -599,6 +617,7 @@ config TOSHIBA_JMR3927
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
......@@ -621,6 +640,7 @@ config TOSHIBA_RBTX4927
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
select CEVT_R4K
select CSRC_R4K
select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
......@@ -642,6 +662,7 @@ config TOSHIBA_RBTX4938
config WR_PPMC
bool "Wind River PPMC board"
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
......@@ -752,6 +773,9 @@ config CEVT_TXX9
config CSRC_BCM1480
bool
config CSRC_R4K
bool
config CSRC_SB1250
bool
......
......@@ -138,6 +138,7 @@ config SOC_AU1X00
bool
select 64BIT_PHYS_ADDR
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
......
......@@ -14,6 +14,7 @@ obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
......@@ -43,6 +44,7 @@ obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SMP_UP) += smp-up.o
obj-$(CONFIG_MIPS_MT) += mips-mt.o
obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 by Ralf Baechle
*/
static cycle_t c0_hpt_read(void)
{
return read_c0_count();
}
static struct clocksource clocksource_mips = {
.name = "MIPS",
.read = c0_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init init_mips_clocksource(void)
{
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
}
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
*
* Symmetric Uniprocessor (TM) Support
*/
#include <linux/kernel.h>
#include <linux/sched.h>
/*
* Send inter-processor interrupt
*/
void up_send_ipi_single(int cpu, unsigned int action)
{
panic(KERN_ERR "%s called", __func__);
}
static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
{
panic(KERN_ERR "%s called", __func__);
}
/*
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
void __cpuinit up_init_secondary(void)
{
}
void __cpuinit up_smp_finish(void)
{
}
/* Hook for after all CPUs are online */
void up_cpus_done(void)
{
}
/*
* Firmware CPU startup hook
*/
void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle)
{
}
void __init up_smp_setup(void)
{
}
void __init up_prepare_cpus(unsigned int max_cpus)
{
}
struct plat_smp_ops up_smp_ops = {
.send_ipi_single = up_send_ipi_single,
.send_ipi_mask = up_send_ipi_mask,
.init_secondary = up_init_secondary,
.smp_finish = up_smp_finish,
.cpus_done = up_cpus_done,
.boot_secondary = up_boot_secondary,
.smp_setup = up_smp_setup,
.prepare_cpus = up_prepare_cpus,
};
......@@ -50,14 +50,6 @@ int update_persistent_clock(struct timespec now)
return rtc_mips_set_mmss(now.tv_sec);
}
/*
* High precision timer functions for a R4k-compatible timer.
*/
static cycle_t c0_hpt_read(void)
{
return read_c0_count();
}
int (*mips_timer_state)(void);
int null_perf_irq(void)
......@@ -84,13 +76,6 @@ EXPORT_SYMBOL(perf_irq);
unsigned int mips_hpt_frequency;
static struct clocksource clocksource_mips = {
.name = "MIPS",
.read = c0_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
......@@ -124,16 +109,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
cd->mult = (u32) temp;
}
static void __init init_mips_clocksource(void)
{
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
}
void __init __weak plat_time_init(void)
{
}
......
......@@ -5,12 +5,14 @@ choice
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select CEVT_R4K
select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select CEVT_R4K
select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
......
......@@ -6,6 +6,7 @@ choice
config CASIO_E55
bool "CASIO CASSIOPEIA E-10/15/55/65"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
......@@ -15,6 +16,7 @@ config CASIO_E55
config IBM_WORKPAD
bool "IBM WorkPad z50"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
......@@ -24,6 +26,7 @@ config IBM_WORKPAD
config NEC_CMBVR4133
bool "NEC CMB-VR4133"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
......@@ -33,6 +36,7 @@ config NEC_CMBVR4133
config TANBAC_TB022X
bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
......@@ -48,6 +52,7 @@ config TANBAC_TB022X
config VICTOR_MPC30X
bool "Victor MP-C303/304"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
......@@ -58,6 +63,7 @@ config VICTOR_MPC30X
config ZAO_CAPCELLA
bool "ZAO Networks Capcella"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
......
......@@ -67,6 +67,17 @@ static inline int mips_clockevent_init(void)
}
#endif
/*
* Initialize the count register as a clocksource
*/
#ifdef CONFIG_CEVT_R4K
extern void init_mips_clocksource(void);
#else
static inline void init_mips_clocksource(void)
{
}
#endif
extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
extern void clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册