[MIPS] Sibyte: Split and move clock code.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -733,15 +733,27 @@ config ARCH_MAY_HAVE_PC_FDC
 config BOOT_RAW
 	bool
 
+config CEVT_BCM1480
+	bool
+
 config CEVT_GT641XX
 	bool
 
 config CEVT_R4K
 	bool
 
+config CEVT_SB1250
+	bool
+
 config CEVT_TXX9
 	bool
 
+config CSRC_BCM1480
+	bool
+
+config CSRC_SB1250
+	bool
+
 config CFE
 	bool
 

arch/mips/kernel/Makefile

@@ -8,9 +8,13 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o
 
+obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
+obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
+obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
+obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 
 binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
 			   irix5sys.o sysirix.o

arch/mips/kernel/cevt-bcm1480.c

+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+                           struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writeq(0, cfg);
+		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     cfg);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Stop the timer until we actually program a shot */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		__raw_writeq(0, cfg);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
+		;
+	}
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	__raw_writeq(delta - 1, init);
+	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+	return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = dev_id;
+	void __iomem *cfg;
+	unsigned long tmode;
+
+	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+	else
+		tmode = 0;
+
+	/* ACK interrupt */
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	____raw_writeq(tmode, cfg);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1480_clockevent_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
+
+	sprintf(name, "bcm1480-counter-%d", cpu);
+	cd->name		= name;
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT;
+	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->rating		= 200;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	clockevents_register_device(cd);
+
+	bcm1480_mask_irq(cpu, irq);
+
+	/*
+	 * Map the timer interrupt to IP[4] of this cpu
+	 */
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+			R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
+
+	bcm1480_unmask_irq(cpu, irq);
+
+	action->handler	= sibyte_counter_handler;
+	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->name	= name;
+	action->dev_id	= cd;
+	setup_irq(irq, action);
+}

arch/mips/kernel/cevt-sb1250.c

+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define IMR_IP2_VAL	K_INT_MAP_I0
+#define IMR_IP3_VAL	K_INT_MAP_I1
+#define IMR_IP4_VAL	K_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+                           struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writeq(0, cfg);
+		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     cfg);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Stop the timer until we actually program a shot */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		__raw_writeq(0, cfg);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
+		;
+	}
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *cfg, *init;
+
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+	__raw_writeq(delta - 1, init);
+	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+	return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = dev_id;
+	void __iomem *cfg;
+	unsigned long tmode;
+
+	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+	else
+		tmode = 0;
+
+	/* ACK interrupt */
+	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+	____raw_writeq(tmode, cfg);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1250_clockevent_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int irq = K_INT_TIMER_0 + cpu;
+	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+	/* Only have 4 general purpose timers, and we use last one as hpt */
+	BUG_ON(cpu > 2);
+
+	sprintf(name, "sb1250-counter-%d", cpu);
+	cd->name		= name;
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT;
+	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->rating		= 200;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	clockevents_register_device(cd);
+
+	sb1250_mask_irq(cpu, irq);
+
+	/*
+	 * Map the timer interrupt to IP[4] of this cpu
+	 */
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			    (irq << 3)));
+
+	sb1250_unmask_irq(cpu, irq);
+
+	action->handler	= sibyte_counter_handler;
+	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->name	= name;
+	action->dev_id	= cd;
+	setup_irq(irq, action);
+}

arch/mips/kernel/csrc-bcm1480.c

+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+static cycle_t bcm1480_hpt_read(void)
+{
+	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+struct clocksource bcm1480_clocksource = {
+	.name	= "zbbus-cycles",
+	.rating	= 200,
+	.read	= bcm1480_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(64),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1480_clocksource;
+	unsigned int plldiv;
+	unsigned long zbbus;
+
+	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+	clocksource_set_clock(cs, zbbus);
+	clocksource_register(cs);
+}

arch/mips/kernel/csrc-sb1250.c

+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define SB1250_HPT_NUM		3
+#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
+
+/*
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again.
+ */
+static cycle_t sb1250_hpt_read(void)
+{
+	unsigned int count;
+
+	count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+	return SB1250_HPT_VALUE - count;
+}
+
+struct clocksource bcm1250_clocksource = {
+	.name	= "MIPS",
+	.rating	= 200,
+	.read	= sb1250_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(23),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1250_clocksource;
+
+	/* Setup hpt using timer #3 but do not enable irq for it */
+	__raw_writeq(0,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_CFG)));
+	__raw_writeq(SB1250_HPT_VALUE,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_INIT)));
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+						 R_SCD_TIMER_CFG)));
+
+	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+	clocksource_register(cs);
+}

arch/mips/sibyte/Kconfig

 config SIBYTE_SB1250
 	bool
+	select CEVT_SB1250
+	select CSRC_SB1250
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SIBYTE_ENABLE_LDT_IF_PCI
@@ -9,6 +11,8 @@ config SIBYTE_SB1250
 
 config SIBYTE_BCM1120
 	bool
+	select CEVT_SB1250
+	select CSRC_SB1250
 	select IRQ_CPU
 	select SIBYTE_BCM112X
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -16,6 +20,8 @@ config SIBYTE_BCM1120
 
 config SIBYTE_BCM1125
 	bool
+	select CEVT_SB1250
+	select CSRC_SB1250
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SIBYTE_BCM112X
@@ -24,6 +30,8 @@ config SIBYTE_BCM1125
 
 config SIBYTE_BCM1125H
 	bool
+	select CEVT_SB1250
+	select CSRC_SB1250
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SIBYTE_BCM112X
@@ -33,12 +41,16 @@ config SIBYTE_BCM1125H
 
 config SIBYTE_BCM112X
 	bool
+	select CEVT_SB1250
+	select CSRC_SB1250
 	select IRQ_CPU
 	select SIBYTE_SB1xxx_SOC
 	select SIBYTE_HAS_ZBUS_PROFILING
 
 config SIBYTE_BCM1x80
 	bool
+	select CEVT_BCM1480
+	select CSRC_BCM1480
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -47,6 +59,8 @@ config SIBYTE_BCM1x80
 
 config SIBYTE_BCM1x55
 	bool
+	select CEVT_BCM1480
+	select CSRC_BCM1480
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SIBYTE_SB1xxx_SOC

arch/mips/sibyte/bcm1480/time.c

@@ -15,164 +15,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
+#include <linux/init.h>
 
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-#include <asm/sibyte/bcm1480_scd.h>
-
-#include <asm/sibyte/sb1250.h>
-
-
-#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
-#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
-#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *cfg, *init;
-
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writeq(0, cfg);
-		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
-		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-			     cfg);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Stop the timer until we actually program a shot */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writeq(0, cfg);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
-	case CLOCK_EVT_MODE_RESUME:
-		;
-	}
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *cfg, *init;
-
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	__raw_writeq(delta - 1, init);
-	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
-
-	return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd = dev_id;
-	void __iomem *cfg;
-	unsigned long tmode;
-
-	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
-		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
-	else
-		tmode = 0;
-
-	/* ACK interrupt */
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	____raw_writeq(tmode, cfg);
-
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1480_clockevent_init(void)
-{
-	unsigned int cpu = smp_processor_id();
-	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
-	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
-	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
-	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
-	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
-
-	sprintf(name, "bcm1480-counter-%d", cpu);
-	cd->name		= name;
-	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT;
-	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
-	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
-	cd->rating		= 200;
-	cd->irq			= irq;
-	cd->cpumask		= cpumask_of_cpu(cpu);
-	cd->set_next_event	= sibyte_next_event;
-	cd->set_mode		= sibyte_set_mode;
-	clockevents_register_device(cd);
-
-	bcm1480_mask_irq(cpu, irq);
-
-	/*
-	 * Map the timer interrupt to IP[4] of this cpu
-	 */
-	__raw_writeq(IMR_IP4_VAL,
-		     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
-			R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
-
-	bcm1480_unmask_irq(cpu, irq);
-
-	action->handler	= sibyte_counter_handler;
-	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
-	action->name	= name;
-	action->dev_id	= cd;
-	setup_irq(irq, action);
-}
-
-static cycle_t bcm1480_hpt_read(void)
-{
-	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
-}
-
-struct clocksource bcm1480_clocksource = {
-	.name	= "zbbus-cycles",
-	.rating	= 200,
-	.read	= bcm1480_hpt_read,
-	.mask	= CLOCKSOURCE_MASK(64),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1480_clocksource_init(void)
-{
-	struct clocksource *cs = &bcm1480_clocksource;
-	unsigned int plldiv;
-	unsigned long zbbus;
-
-	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
-	zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
-	clocksource_set_clock(cs, zbbus);
-	clocksource_register(cs);
-}
+extern void sb1480_clockevent_init(void);
+extern void sb1480_clocksource_init(void);
 
 void __init plat_time_init(void)
 {

arch/mips/sibyte/sb1250/time.c

@@ -15,180 +15,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
+#include <linux/init.h>
 
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_scd.h>
-
-#define IMR_IP2_VAL	K_INT_MAP_I0
-#define IMR_IP3_VAL	K_INT_MAP_I1
-#define IMR_IP4_VAL	K_INT_MAP_I2
-
-#define SB1250_HPT_NUM		3
-#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *cfg, *init;
-
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writeq(0, cfg);
-		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
-		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-			     cfg);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Stop the timer until we actually program a shot */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writeq(0, cfg);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
-	case CLOCK_EVT_MODE_RESUME:
-		;
-	}
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *cfg, *init;
-
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	__raw_writeq(delta - 1, init);
-	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
-
-	return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd = dev_id;
-	void __iomem *cfg;
-	unsigned long tmode;
-
-	if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
-		tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
-	else
-		tmode = 0;
-
-	/* ACK interrupt */
-	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	____raw_writeq(tmode, cfg);
-
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1250_clockevent_init(void)
-{
-	unsigned int cpu = smp_processor_id();
-	unsigned int irq = K_INT_TIMER_0 + cpu;
-	struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
-	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
-	unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
-	/* Only have 4 general purpose timers, and we use last one as hpt */
-	BUG_ON(cpu > 2);
-
-	sprintf(name, "sb1250-counter-%d", cpu);
-	cd->name		= name;
-	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT;
-	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
-	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
-	cd->rating		= 200;
-	cd->irq			= irq;
-	cd->cpumask		= cpumask_of_cpu(cpu);
-	cd->set_next_event	= sibyte_next_event;
-	cd->set_mode		= sibyte_set_mode;
-	clockevents_register_device(cd);
-
-	sb1250_mask_irq(cpu, irq);
-
-	/*
-	 * Map the timer interrupt to IP[4] of this cpu
-	 */
-	__raw_writeq(IMR_IP4_VAL,
-		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
-			    (irq << 3)));
-
-	sb1250_unmask_irq(cpu, irq);
-
-	action->handler	= sibyte_counter_handler;
-	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
-	action->name	= name;
-	action->dev_id	= cd;
-	setup_irq(irq, action);
-}
-
-/*
- * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
- * again.
- */
-static cycle_t sb1250_hpt_read(void)
-{
-	unsigned int count;
-
-	count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
-
-	return SB1250_HPT_VALUE - count;
-}
-
-struct clocksource bcm1250_clocksource = {
-	.name	= "MIPS",
-	.rating	= 200,
-	.read	= sb1250_hpt_read,
-	.mask	= CLOCKSOURCE_MASK(23),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1250_clocksource_init(void)
-{
-	struct clocksource *cs = &bcm1250_clocksource;
-
-	/* Setup hpt using timer #3 but do not enable irq for it */
-	__raw_writeq(0,
-		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
-						 R_SCD_TIMER_CFG)));
-	__raw_writeq(SB1250_HPT_VALUE,
-		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
-						 R_SCD_TIMER_INIT)));
-	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
-						 R_SCD_TIMER_CFG)));
-
-	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
-	clocksource_register(cs);
-}
+extern void sb1250_clocksource_init(void);
+extern void sb1250_clockevent_init(void);
 
 void __init plat_time_init(void)
 {