- 21 5月, 2019 1 次提交
-
-
由 Mario Six 提交于
Future gdsys boards will switch from the legacy drivers in board/gdsys/common to DM-based drivers. Define a Kconfig option that disables the legacy drivers. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 3月, 2018 1 次提交
-
-
由 Mario Six 提交于
The @gdsys.cc addresses are supposed to be used for mailing lists. Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc equivalent. Also, Dirk's address was wrong in one place; fix that as well. Signed-off-by: NMario Six <six@gdsys.cc>
-
- 07 6月, 2016 1 次提交
-
-
由 Dirk Eibach 提交于
Limit "osdsize"-command to access valid screens only. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 21 3月, 2016 1 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 13 11月, 2015 4 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
osdsize adjusts the gdsys IHS osd dimensions in characters. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 19 11月, 2014 1 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 7月, 2014 2 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
- 26 7月, 2013 3 次提交
-
-
由 Dirk Eibach 提交于
OSD size was constant 32x16 characters. Now the size is set as announced by the FPGA. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
A set of accessor functions was added to be able to access not only memory mapped FPGA in a generic way. Thanks to Wolfgang Denk for getting this sorted properly. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: NTom Rini <trini@ti.com>
-
- 30 4月, 2012 1 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 21 4月, 2011 2 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 2月, 2011 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 28 11月, 2010 1 次提交
-
-
由 Thomas Weber 提交于
Use the return value of cmd_usage instead of ignoring this and returning a 1. Signed-off-by: NThomas Weber <weber@corscience.de> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
- 25 10月, 2010 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-