- 21 5月, 2019 11 次提交
-
-
由 Dirk Eibach 提交于
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Use a more extensive FPGA feature reporting style in the gdsys ioep-fpga driver. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Make the ioloop command DM compatible, while keeping the old functionality for not-yet-converted boards. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Replace the boolean parameter of io_check_status that controls whether the status is printed or not with a documenting enum. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Fix some style violations in the ioloop command, and make the code more readable where possible. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Future gdsys boards will switch from the legacy drivers in board/gdsys/common to DM-based drivers. Define a Kconfig option that disables the legacy drivers. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
The ppc4xx architecture was removed, and with it several old gdsys 44x boards, but some "debris" from these purged boards was left over. This patch removes these remnants (mostly entries in Makefiles, some now superfluous data structures and some now obsolete config variables from the whitelist). Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Dirk Eibach 提交于
The initialization sequence in the newest release notes of the 88e1518 phy omits two commands. Remove them from the sequence. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Mario Six 提交于
For the DM case, use the proper parameter for the regmap_init_mem call (which is the ofnode, not the udevice). Signed-off-by: NMario Six <mario.six@gdsys.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Mario Six 提交于
Use the proper CONFIG_TARGET_STRIDER Kconfig option to replace the CONFIG_STRIDER ad-hoc config option. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Use the proper CONFIG_TARGET_HRCON Kconfig option to replace the CONFIG_HRCON ad-hoc config option. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 29 9月, 2018 1 次提交
-
-
由 Mario Six 提交于
Add command to query information from and write text to on-screen display (OSD) devices. Signed-off-by: NMario Six <mario.six@gdsys.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 09 5月, 2018 2 次提交
-
-
由 Mario Six 提交于
Make the ihs_mdio driver DM-compatible, while retaining the old functionality for not-yet-converted boards. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
To prepare for DM conversion, encapsulate all register accesses in function calls. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 3月, 2018 1 次提交
-
-
由 Mario Six 提交于
The @gdsys.cc addresses are supposed to be used for mailing lists. Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc equivalent. Also, Dirk's address was wrong in one place; fix that as well. Signed-off-by: NMario Six <six@gdsys.cc>
-
- 07 6月, 2016 3 次提交
-
-
由 Dirk Eibach 提交于
There is a new strider console flavor with DisplayPort video. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
Limit "osdsize"-command to access valid screens only. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
There is a new "intempo" compression type that can be reported on startup. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 21 3月, 2016 1 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 15 1月, 2016 1 次提交
-
-
由 Ben Whitten 提交于
With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: NBen Whitten <ben.whitten@gmail.com> Acked-by: NWolfgang Denk <wd@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 20 11月, 2015 1 次提交
-
-
由 Simon Glass 提交于
The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 13 11月, 2015 10 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
osdsize adjusts the gdsys IHS osd dimensions in characters. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
The strider platform moved some generic code into ioep-fpga.c. Make use of that on hrcon platform. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Dirk Eibach 提交于
Support dlvision-10g hardware with displayport output. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
DP501 only supports DP 1.1a. Limit settings for link bandwidth and lane count to values allowed by DP 1.1a. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
With Club 3D dual link adapter there are AUX-channel timeouts when EDID is read. Increasing retry interval time to max (400us) fixes this. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 19 11月, 2014 2 次提交
-
-
由 Dirk Eibach 提交于
The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 7月, 2014 4 次提交
-
-
由 Dirk Eibach 提交于
For proper displayport performance, scrambling has to be enabled, but is turned off on DP501 by default. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
- 01 11月, 2013 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de>
-
- 27 7月, 2013 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-