The mutex lock and unlock functions are stubbed out and mutex_is_locked
was 0.  This caused asserts to fail in ubifs code when checking that the
mutex was locked.  For example,

UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278

Assume that the "mutex" is locked since that is the normal case when it
is checked in the ubifs code.
Signed-off-by: NBradley Bolen <bradleybolen@gmail.com>

Update scripts/checkpatch.pl from upstream.

One of the many corrections is not creating an error for cover-letters.

Reintroduce U-Boot's
5c761ce5
checkpatch.pl: Add warning for new __packed additions
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Using sizeof gives the size of the pointer only, not the string. This
could easily lead to crashes when using -l argument.
Signed-off-by: NKristian Amlie <kristian.amlie@northern.tech>

The most significant change is the addition of the --self-test option
which allows to run a consistency check on all MAINTAINERS files.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Provide correct file paths.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

This patch adds the bulk clock API tests for the sandbox test suite.

It's very similar to the main test but only uses the _bulk() API and
checks if the clocks are correctly enabled/disabled.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This patch adds a "bulk" API to the clock API in order to get/enable/disable
/release a group of clocks associated with a device.

This bulk API will avoid adding a copy of the same code to manage
a group of clocks in drivers.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This patch adds the bulk reset API tests for the sandbox test suite.

Unlike the main test, it also check the "other" reset signal using the bulk API
and checks if the resets are correctly asserted/deasserted.

To allow the bulk API to work, and avoid changing the DT, the number of resets
of the sandbox reset controller has been bumped to 101 for the "other" reset
line to be valid.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This patch adds a "bulk" API to the reset API in order to get/deassert/
assert/release a group of reset signals associated with a device.

This bulk API will avoid adding a copy of the same code to manage
a group of reset signals in drivers.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Without the units these numbers are confusing. Add a comment about the
unit being 'bytes' and mention 'buildman' as the source.
Suggested-by: NLukasz Majewski <lukma@denx.de>
Signed-off-by: NSimon Glass <sjg@chromium.org>

If there is a problem with the parameters to log_add_filter(), the memory
allocated is currently not freed. Fix this.

Reported-by: Coverity (CID: 171962)
Signed-off-by: NSimon Glass <sjg@chromium.org>

Commit 253c60a5 breaks the exit value of 'mkimage -T rkimage'
and print the following  error:
  mkimage: Can't print header for Rockchip Boot Image support: Success

It is not a failure to not print headers, so just display the warning message,
and finish the function properly.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>

Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Similarly to ARMV7, on ARMV7M instruction cache memory needs
to be disabled before running linux kernel to avoid kernel to
be stuck.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

The Amlogic Meson SoCs serial bindings were not written when serial
support was pushed into Linux and U-Boot.
A clean bindings document has been merged into Linux tree to correctly
handle the multiple clocks feeding the serial peripheral.
This update the U-Boot serial_meson driver with the new compatible
string for Amlogic Meson GX Socs.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The Amlogic Meson SoCs embeds up to 256 reset lines, add the corresponding
driver.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Xilinx changes for v2018.05-rc2

- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL init for zcu102 revA
- Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
  and zc1751-dc3
- Net fixes - xlnx,phy-type
- 64bit axi ethernet support
- arasan: Fix nand write issue
- fpga fixes
- Maintainer file updates

Patch queue for efi - 2018-04-09

Highlights this time around:

  - Lots of minor spec compliance fixes
  - Support full range of GOP BLT commands
  - More fine grained error checking
  - Network fixes (init, DP)
  - Lots of other bug fixes...

Xilinx zcu111 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Xilinx zcu104 is another customer board. It is sort of zcu102 clone with
some differences.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add support for zc12xx boards. All of them are internal boards for
silicon validation and share very similar base platforms.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

zc1751 is based board with dc3 extenstion card which is used for silicon
validation.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add support for Xilinx zcu100.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

SPL MMC boot requires to have clock early.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Add psu init for zc1751 dc cards.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add psu init for zcu102-revA.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch enables the fixed link support for
all ZynqMP boards.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is no memory which stores mac address that's why generate it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable ethernet phys for zc1751 dc5.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.

To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Targets without net can't use pxe or dhcp boot methods.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch reads phytype from property "xlnx,phy-type" instead
od simply looking for "phy-type". This is to be inline with
Linux and also fixes the issue of detecting it wrongly in
u-boot.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.
Signed-off-by: NVipul Kumar <vipulk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

In commit 2453c695 ("arm64: zynqmp: nand: Fixed NAND erase issue for
size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed
to 0xFFFF and the same macro is used in nand write and so that getting
nand write error.
This patch reverted this macro to the 0xFFFF0000 and used
ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function
which is equal to 0xFFFF.
Signed-off-by: NVipul Kumar <vipulk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NNava kishore Manne <navam@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>