- 29 10月, 2017 6 次提交
-
-
由 Heinrich Schuchardt 提交于
Many MAINTAINERS files are in subdirectories. We should enable searching these. Reported-by: NWalt Feasel <waltfeasel@gmail.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Allow prefixing typical strings with L for wide strings Patch originally by Joe Perches https://lkml.org/lkml/2017/10/17/1117Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
-
由 Dongjin Kim 提交于
Signed-off-by: NDongjin Kim <tobetter@gmail.com> CC: Simon Glass <sjg@chromium.org> CC: Minkyu Kang <mk7.kang@samsung.com>
-
由 Niko Mauno 提交于
Resort to malloc_cache_aligned() rather than malloc() which also removes 'CACHE: Misaligned operation at range' warnings. Signed-off-by: NNiko Mauno <niko.mauno@vaisala.com>
-
由 Alexander Graf 提交于
With the introduction of EFI variable support, we also wanted to persist these EFI variables. However, the way it was implemented we ended up persisting all U-Boot environment variables on every EFI boot. That could potentially lead to unexpected side effects because variables that were not supposed to be written to persisted env get written. It also means we may end up writing the environment more often than we should. For this release, let's just disable EFI variable persistence and instead implement it properly for the next one. Reported-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Fixes: ad644e7c ("efi_loader: efi variable support") Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 28 10月, 2017 1 次提交
-
-
- 27 10月, 2017 33 次提交
-
-
由 Sumit Garg 提交于
Enable support for loadables in SEC firmware FIT image. Currently support is added for single loadable image. Brief description of implementation: Add two more address pointers (loadable_h, loadable_l) as arguments to sec_firmware_init() api. Create new api: sec_firmware_checks_copy_loadable() to check if loadables node is present in SEC firmware FIT image. If present, verify loadable image and copies it to secure DDR memory. Populate address pointers with secure DDR memory addresses where loadable is copied. Example use-case could be trusted OS (tee.bin) as loadables node in SEC firmware FIT image. Signed-off-by: NSumit Garg <sumit.garg@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Sumit Garg 提交于
Change DDR allocated for secure memory from 2 MB to 66 MB. This additional 64 MB secure memory is required for trusted OS running in Trusted Execution Environment using ARMv8 TrustZone. Signed-off-by: NSumit Garg <sumit.garg@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NAmrita Kumari <amrita.kumari@nxp.com> Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: NAmrita Kumari <amrita.kumari@nxp.com> Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ran Wang 提交于
Because COMFIG_DM_USB has been enabled and will not use it anymore. Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ran Wang 提交于
use Kconfig to select xhci accordingly. Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ran Wang 提交于
Use Kconfig to select QE-HDLC and USB pin-mux. Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit 05b29aa0 ("net: phy: realtek: fix enabling of the TX-delay for RTL8211F"). Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Yuantian Tang 提交于
On ls1012a soc, core clock source frequency is fixed at 100Mhz. Generic timer frequency is core clock source divided by 4, which is 25Mhz. Signed-off-by: NTang Yuantian <andy.tang@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Prabhakar Kushwaha 提交于
Memory allocated via malloc is not guaranteed to be zeroized. So explicitly use calloc instead of malloc. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Masahiro Yamada 提交于
This comment creates a wrong entry in config_whitelist.txt. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro only appears in commented-out lines. It is not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This macro is defined, but not referenced by anyone. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher<hs@denx.de>
-
由 Masahiro Yamada 提交于
CONFIG_SYS_I2C_FTI2C010 is not enabled by anyone. Commit 28527096 ("dm: i2c: Add a note to I2C drivers which need conversion") prompted to convert this driver to DM before June 2017, but not converted yet. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Masahiro Yamada 提交于
This driver was used by Blackfin boards, but Blackfin support is gone. There is no user of this driver. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NHeiko Schocher <hs@denx.de>
-
-
由 Vasily Khoruzhick 提交于
Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> [agust: rebased v5 on u-boot-video/master] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Vasily Khoruzhick 提交于
It will be reused in new DM LCD driver. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
-
由 Bin Meng 提交于
The supported sleep states are generic on Intel processors. Move the ASL definition to the common place. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
On some platforms (eg: Braswell), the FSP will not produce the graphics info HOB unless you plug some cables to the display interface (eg: HDMI) on the board. Add such notes in the FSP video driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Intel Braswell FSP requires SPI controller settings to be locked down, let's do this in the chrryhill.dts and remove previous Kconfig option. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-