usb: host: Move CONFIG_XHCI_FSL to Kconfig

use Kconfig to select xhci accordingly.
Signed-off-by: NRan Wang <ran.wang_1@nxp.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

drivers/usb/host/Kconfig

@@ -71,6 +71,12 @@ config USB_XHCI_DRA7XX_INDEX
 	  Select the DRA7XX xHCI USB index.
 	  Current supported values: 0, 1.
 
+config USB_XHCI_FSL
+	bool "Support for NXP Layerscape on-chip xHCI USB controller"
+	default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
+	depends on !SPL_NO_USB
+	help
+	  Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
 endif # USB_XHCI_HCD
 
 config USB_EHCI_HCD

include/configs/ls1012afrdm.h

@@ -34,7 +34,6 @@
 /*
 * USB
 */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 #define CONFIG_CMD_MEMINFO

include/configs/ls1012aqds.h

@@ -119,7 +119,6 @@
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*  MMC  */

include/configs/ls1012ardb.h

@@ -22,7 +22,6 @@
 /*
 * USB
 */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*

include/configs/ls1021aiot.h

@@ -20,7 +20,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
 /* XHCI Support - enabled by default */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 
 #define CONFIG_SYS_CLK_FREQ		100000000

include/configs/ls1021aqds.h

@@ -405,7 +405,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 
 /*

include/configs/ls1021atwr.h

@@ -45,7 +45,6 @@
 #endif
 
 /* XHCI Support - enabled by default */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 
 #define CONFIG_SYS_CLK_FREQ		100000000

include/configs/ls1043aqds.h

@@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 
 /*

include/configs/ls1043ardb.h

@@ -286,7 +286,6 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 #endif
 

include/configs/ls1046aqds.h

@@ -137,7 +137,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 
 /* SATA */

include/configs/ls1046ardb.h

@@ -211,7 +211,6 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 #endif
 

include/configs/ls2080aqds.h

@@ -438,7 +438,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * USB
  */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 
 #include <asm/fsl_secure_boot.h>

include/configs/ls2080ardb.h

@@ -336,7 +336,6 @@ unsigned long get_board_sys_clk(void);
 /*
  * USB
  */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 
 #undef CONFIG_CMDLINE_EDITING

scripts/config_whitelist.txt

@@ -5026,7 +5026,6 @@ CONFIG_USB_TTY
 CONFIG_USB_TUSB_OMAP_DMA
 CONFIG_USB_ULPI_TIMEOUT
 CONFIG_USB_XHCI_EXYNOS
-CONFIG_USB_XHCI_FSL
 CONFIG_USB_XHCI_KEYSTONE
 CONFIG_USB_XHCI_OMAP
 CONFIG_USER_LOWLEVEL_INIT