arm: layerscape: Remove CONFIG_USB_MAX_CONTROLLER_COUNT

Because COMFIG_DM_USB has been enabled and will not use it anymore.
Signed-off-by: NRan Wang <ran.wang_1@nxp.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

include/configs/ls1012afrdm.h

@@ -31,11 +31,6 @@
        "kernel_load=0x96000000\0"              \
        "kernel_size=0x2800000\0"
 
-/*
-* USB
-*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000

include/configs/ls1012aqds.h

@@ -118,9 +118,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/*XHCI Support - enabled by default*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-
 /*  MMC  */
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC

include/configs/ls1012ardb.h

@@ -19,10 +19,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
-/*
-* USB
-*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*
  * I2C IO expander

include/configs/ls1021aiot.h

@@ -19,9 +19,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
-/* XHCI Support - enabled by default */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 

include/configs/ls1021aqds.h

@@ -404,9 +404,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/*XHCI Support - enabled by default*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-
 /*
  * Video
  */

include/configs/ls1021atwr.h

@@ -44,9 +44,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/* XHCI Support - enabled by default */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 

include/configs/ls1043aqds.h

@@ -370,9 +370,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
-/* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-
 /*
  * Miscellaneous configurable options
  */

include/configs/ls1043ardb.h

@@ -284,11 +284,6 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #define CONFIG_LIBATA

include/configs/ls1046aqds.h

@@ -136,9 +136,6 @@ unsigned long get_board_ddr_clk(void);
 #define CFG_LPUART_EN		0x2
 #endif
 
-/* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI

include/configs/ls1046ardb.h

@@ -209,11 +209,6 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #define CONFIG_LIBATA

include/configs/ls2080aqds.h

@@ -435,11 +435,6 @@ unsigned long get_board_ddr_clk(void);
 
 #endif
 
-/*
- * USB
- */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS2_QDS_H */

include/configs/ls2080ardb.h

@@ -333,11 +333,6 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_MISC_INIT_R
 
-/*
- * USB
- */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
-
 #undef CONFIG_CMDLINE_EDITING
 #include <config_distro_defaults.h>