The generated flash.log file that mach-imx uses for MKIMAGEOUTPUT is not
covered by any other ignore pattern. Ignore all *.log files.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

The da850evm include environment/ti/mmc.h and places
DEFAULT_MMC_TI_ARGS, defined int that file, in
CONFIG_EXTRA_ENV_SETTINGS.  This has been broken for some time
since neither CMD_PART nor CMD_UUID are available, so manually
changing the environmental variables was always required before
booting from MMC. With this patch, these scripts should work
again, and by default they point to mmc 0, partition 2, and
the dtb file exists in a /boot directory on partition 2.
Signed-off-by: NAdam Ford <aford173@gmail.com>

A previous patch converted a bunch of settings for CONFIG_SF_DEFAULT
but it broke the SPI Flash which now prevents booting.  This patch
now correctly sets CONFIG_SF_DEFAULT_SPEED=30000000 to match what it
was before the conversion.

Fixes: 14453fbf ("Convert CONFIG_SF_DEFAULT_* to Kconfig")
Signed-off-by: NAdam Ford <aford173@gmail.com>

addr0 is being freed twice, leading to segmentation fault
Signed-off-by: NBjörn Stenberg <bjorn@haxx.se>

The match controller register is not cleared during
initialization. However, some bits of this register may reset the TC if
tnMRx match it.

As we can't make any assumption about how U-Boot is launched by the first
stage bootloader (such as S1L) clearing this register ensure that the
timers work as expected.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Since the introduction of the driver, some memory in IRAM is reserved for
the TX buffers.

However there are not used but instead of it, it is the buffer provided
by the net stack which is used. As stated in the comment of the driver,
not using the IRAM buffer could cause cache issue and lower the
throughput.

For the second argument it is less the case for transmitting buffers
because the throughput gain in IRAM is mitigated by the time to copy the
data from RAM to IRAM, but the first argument is still valid and indeed
this patch fixes issue seen with Ethernet on some boards
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts"
was to allow disabling the default ECC layouts if a driver is known to
provide its own ECC layout. However, this commit did the opposite and
disabled the default layout when it was _not_ selected.

It breaks all the NAND drivers not providing their own ECC layout this
patch fix this situation.

It was tested with the lpc32xx_nand_slc driver.

Fixes: a38c3af8 ("mtd: nand: raw: allow to disable unneeded ECC layouts")
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: NEugen Hristev <eugen.hristev@microchip.com>

generate define for an alias only if the struct is not
created already.

This prevents compilerwarning:
  PLAT    spl/dts/dt-platdata.o
spl/dts/dt-platdata.c:11:46: error: missing braces around initializer [-Werror=missing-braces]
 static const struct dtd_simple_bus dtv_ahb = {
                                              ^
spl/dts/dt-platdata.c:20:46: error: missing braces around initializer [-Werror=missing-braces]
 static const struct dtd_simple_bus dtv_apb = {
                                              ^
cc1: all warnings being treated as errors

on the at91 based taurus board. Reason is in at91sam9260.dtsi
is defined:

ahb {
        compatible = "simple-bus";
        ranges;

and later:

pinctrl: pinctrl@fffff400 {
        compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
        ranges = <0xfffff400 0xfffff400 0x600>;

without this patch dtoc generates:

struct dtd_atmel_at91rm9200_pinctrl {
	fdt32_t		atmel_mux_mask[6];
	fdt32_t		ranges[3];
	fdt32_t		reg[6];
};

struct dtd_simple_bus {
        bool            ranges;
};

"#define dtd_simple_bus dtd_atmel_at91rm9200_pinctrl"

and the line with "define dtd_simple_bus..." introduces
the warning. This define is not needed.
Signed-off-by: NHeiko Schocher <hs@denx.de>

btrfs_search_tree should return the first item in the tree that is
greater or equal to the searched item.

The search algorithm did not properly handle the edge case where the
searched item is higher than the last item of the node but lower than
the first item of the next node. Instead of properly returning the first
item of the next node, it was returning an invalid path pointer
(pointing to a non-existent item after the last item of the node + 1).

This fixes two issues in the btrfs driver:
  - Looking for a ROOT_ITEM could fail if it was the first item of its
    leaf node.
  - Iterating through DIR_INDEX entries (for readdir) could fail if the
    first DIR_INDEX entry was the first item of a leaf node.
Signed-off-by: NPierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>

Signed-off-by: NIsmael Luceno <ismael.luceno@silicon-gears.com>

ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
value. To perform these searches using only two items from the key, the
btrfs driver uses a special "btrfs_search_tree_key_type" function.

The algorithm used by that function to transform a 3-tuple search into a
2-tuple search was subtly broken, leading to items not being found if
they were the first in their tree node.

This commit fixes btrfs_search_tree_key_type to properly behave in these
situations.
Signed-off-by: NPierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>

Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

Add new defconfig files for the AM65x High Security EVM.

This defconfigs are the same as for the non-secure part, except for:
    CONFIG_TI_SECURE_DEVICE option set to 'y'
    CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

K3 HS devices require signed binaries for boot, use the SECDEV tools
to sign the boot artifacts during build.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

K3 devices have High Security (HS) variants along with the non-HS already
supported. Like the previous generation devices (OMAP/Keystone2) K3
supports boot chain-of-trust by authenticating and optionally decrypting
images as they are unpacked from FIT images. Add support for this here.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

SYSFW version 2019.01 introduces a slightly modified version of this API,
add support for it here.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

TI-SCI message protocol provides support for controlling the firewall
configurations available in SoC.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling firewalls.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>

On HS devices the 512b region of reset isolated memory called
MCU_PSRAM0 is firewalled by default. Until SYSFW is loaded we
cannot use this memory. It is only used to store a single value
left at the end of SRAM by ROM that will be needed later. Save
that value to a global variable stored in the .data section.
This section is used as .bss will be cleared between saving
this value and using it.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

adding a new bootstage ID:
BOOTSTAGE_ID_ENTER_CLI_LOOP
Signed-off-by: NHeiko Schocher <hs@denx.de>

The objective is to provide a simple way to retrieve a BMP file,
and display it as splashscreen, from extlinux.conf file input.

For this, we take example on https://www.syslinux.org/wiki/
index.php?title=Menu#The_advanced_menu_system
and more particularly on MENU BACKGROUND chapter.
For this, add "menu background" support in pxe command.

As example, extlinux.conf content will look like:

# Generic Distro Configuration file generated by OpenEmbedded
menu title Select the boot mode
TIMEOUT 20
menu background ../splash.bmp
DEFAULT stm32mp157c-ev1-sdcard
LABEL stm32mp157c-ev1-sdcard
	KERNEL /uImage
	FDT /stm32mp157c-ev1.dtb
	APPEND root=/dev/mmcblk0p6 rootwait rw earlyprintk console=ttySTM0,115200
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Fixes building mkimage on systems where OpenSSL header files do not
live in the standard include path.
Signed-off-by: NPierre Bourdon <delroth@gmail.com>

%g/rathen then/rather than/
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The handling of regarding bootmode and early setup has been moved to
central location 'common/br_resetc.c', so use this on brxre1 board.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

- fixup coding style
- drop unused 'PUSH_KEY' define
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

On many B&R boards we have a reset-controller, responsible for very
early board-bringup (voltages, clocks, ...) and bootmode selection.

To be ready for adding more B&R boards to source tree while avoiding
duplicate code, we add the resetcontroller implementation to the common
part of B&R boards.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Many B&R boards are equipped with an I2C-EEPROM where various
information can be stored.

Today there is only a single byte for 'board_id' used.

We write this 'board_id' into environment for later use during boot.

If the value != 0xFF, meaning the byte is programmed, we modify the
"brdefaultip" environment variable for setting an IP-Address based on
board_id.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Today the BuR common stuff is only used on AM33XX boards. In future we
plan to have many other platforms than AM33XX so we have to move arch-
specific #include(s) to responsible #ifdef sections. By the way we drop
unneeded #include(s).
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

- Add DM based generic watchdog start and reset implementation
  and remove all ad-hoc implementations (Stefan)
- Move mv_sdhci to DM (Pierre)
- Misc turris_omnia updates (Pierre)
- Change openrd targets to correctly build again (size changes
  and fixes to the dts targets) and bring it back into Travis
  builds (Stefan)
- Add Kirkwood db-88f6281-bp board (Chris)

With the latest size increase of the openrd boards, they all compile
clean again. Let's mark them as maintained again and add the Travis
job.

Please note that I can only compile-test these targets as I don't
have access to one of those boards.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Albert ARIBAUD <albert-u-boot@aribaud.net>
Cc: Vagrant Cascadian <vagrant@debian.org>
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Tom Rini <trini@konsulko.com>

With the new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

The watchdog servicing is enabled via CONFIG_WATCHDOG.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>

With the generic watchdog driver now implemented, this patch removes
some legacy stuff from the MPC8xx watchdog driver and its Kconfig
integration. CONFIG_MPC8xx_WATCHDOG is completely removed and
hw_watchdog_reset() is made static, as the watchdog will now get
serviced via the DM infrastructure if enabled via CONFIG_WATCHDOG.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>

Now that we have a generic DT property "timeout-sec" handling, the
driver specific implementation can be dropped.

This patch also changes the timeout restriction to the min and max
values (clipping). Before this patch, the value provided via
"timeout-sec" was used if the parameter was too high or low. Now
the driver specific min and max values are used instead.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)

This patch tries to implement a generic watchdog_reset() function that
can be used by all boards that want to service the watchdog device in
U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.

Without this approach, new boards or platforms needed to implement a
board specific version of this functionality, mostly copy'ing the same
code over and over again into their board or platforms code base.

With this new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

This patch also adds a new flag to the GD flags, to flag that the
watchdog is ready to use and adds the pointer to the watchdog device
to the GD. This enables us to remove the global "watchdog_dev"
variable, which was prone to cause problems because of its potentially
very early use in watchdog_reset(), even before the BSS is cleared.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Maxim Sloyko <maxims@google.com>
Cc: Erik van Luijk <evanluijk@interact.nl>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)

With the latest changes to the drivers (SPI_FLASH_SPANSION etc), Travis
reports that the SPL image is too big. Let's use the thumb instructions
in SPL to save some space and make the image fit again.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Marek Behun <marek.behun@nic.cz>
Reviewed-by: NMarek Behún <marek.behun@nic.cz>

Switch to the driver model for USB on the db-88f6281-bp board.
CONFIG_BLK can't be enabled yet because mvebu_mmc.c needs converting.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

This is Marvell's Kirkwood development board. It has the following
features

 - 512M DDR2
 - 2 PCI connectors
 - 1 x1 PCI-e interface
 - 1 Gigabit Ethernet Port
 - 2 SATA Ports
 - USB 2.0 Interface
 - SDIO
 - 128M NAND Flash
 - 16M SPI Flash

It can be strapped to boot from SPI or NAND so there are two defconfigs
(one per boot media).
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Signed-off-by: NStefan Roese <sr@denx.de>

The boot commands have changed in the environment. Add a note about the
incompatible change and how resolve the issue in the board's README.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

We have run now multiple times into size issues with the openrd
board port. To finally fix this, this patch now moves the U-Boot size
from 0x6.0000 to 0x8.0000, giving enough space for the next time.

This also changes the environment location and potentially the
MTD partitioning, but I see no better fix for now. Especially since
this board does not have an active maintainer.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Chris Packham <judge.packham@gmail.com>
Reviewed-by: NChris Packham <judge.packham@gmail.com>
Signed-off-by: NStefan Roese <sr@denx.de>