提交 32ca8ffd 编写于 作者: A Andrew F. Davis 提交者: Tom Rini

firmware: ti_sci: Add support for firewall management

TI-SCI message protocol provides support for controlling the firewall
configurations available in SoC.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling firewalls.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAndreas Dannenberg <dannenberg@ti.com>
上级 407a2192
......@@ -2428,6 +2428,178 @@ fail:
return ret;
}
/**
* ti_sci_cmd_set_fwl_region() - Request for configuring a firewall region
* @handle: pointer to TI SCI handle
* @region: region configuration parameters
*
* Return: 0 if all went well, else returns appropriate error value.
*/
static int ti_sci_cmd_set_fwl_region(const struct ti_sci_handle *handle,
const struct ti_sci_msg_fwl_region *region)
{
struct ti_sci_msg_fwl_set_firewall_region_req req;
struct ti_sci_msg_hdr *resp;
struct ti_sci_info *info;
struct ti_sci_xfer *xfer;
int ret = 0;
if (IS_ERR(handle))
return PTR_ERR(handle);
if (!handle)
return -EINVAL;
info = handle_to_ti_sci_info(handle);
xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_SET,
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
(u32 *)&req, sizeof(req), sizeof(*resp));
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(info->dev, "Message alloc failed(%d)\n", ret);
return ret;
}
req.fwl_id = region->fwl_id;
req.region = region->region;
req.n_permission_regs = region->n_permission_regs;
req.control = region->control;
req.permissions[0] = region->permissions[0];
req.permissions[1] = region->permissions[1];
req.permissions[2] = region->permissions[2];
req.start_address = region->start_address;
req.end_address = region->end_address;
ret = ti_sci_do_xfer(info, xfer);
if (ret) {
dev_err(info->dev, "Mbox send fail %d\n", ret);
return ret;
}
resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
if (!ti_sci_is_response_ack(resp))
return -ENODEV;
return 0;
}
/**
* ti_sci_cmd_get_fwl_region() - Request for getting a firewall region
* @handle: pointer to TI SCI handle
* @region: region configuration parameters
*
* Return: 0 if all went well, else returns appropriate error value.
*/
static int ti_sci_cmd_get_fwl_region(const struct ti_sci_handle *handle,
struct ti_sci_msg_fwl_region *region)
{
struct ti_sci_msg_fwl_get_firewall_region_req req;
struct ti_sci_msg_fwl_get_firewall_region_resp *resp;
struct ti_sci_info *info;
struct ti_sci_xfer *xfer;
int ret = 0;
if (IS_ERR(handle))
return PTR_ERR(handle);
if (!handle)
return -EINVAL;
info = handle_to_ti_sci_info(handle);
xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET,
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
(u32 *)&req, sizeof(req), sizeof(*resp));
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(info->dev, "Message alloc failed(%d)\n", ret);
return ret;
}
req.fwl_id = region->fwl_id;
req.region = region->region;
req.n_permission_regs = region->n_permission_regs;
ret = ti_sci_do_xfer(info, xfer);
if (ret) {
dev_err(info->dev, "Mbox send fail %d\n", ret);
return ret;
}
resp = (struct ti_sci_msg_fwl_get_firewall_region_resp *)xfer->tx_message.buf;
if (!ti_sci_is_response_ack(resp))
return -ENODEV;
region->fwl_id = resp->fwl_id;
region->region = resp->region;
region->n_permission_regs = resp->n_permission_regs;
region->control = resp->control;
region->permissions[0] = resp->permissions[0];
region->permissions[1] = resp->permissions[1];
region->permissions[2] = resp->permissions[2];
region->start_address = resp->start_address;
region->end_address = resp->end_address;
return 0;
}
/**
* ti_sci_cmd_change_fwl_owner() - Request for changing a firewall owner
* @handle: pointer to TI SCI handle
* @region: region configuration parameters
*
* Return: 0 if all went well, else returns appropriate error value.
*/
static int ti_sci_cmd_change_fwl_owner(const struct ti_sci_handle *handle,
struct ti_sci_msg_fwl_owner *owner)
{
struct ti_sci_msg_fwl_change_owner_info_req req;
struct ti_sci_msg_fwl_change_owner_info_resp *resp;
struct ti_sci_info *info;
struct ti_sci_xfer *xfer;
int ret = 0;
if (IS_ERR(handle))
return PTR_ERR(handle);
if (!handle)
return -EINVAL;
info = handle_to_ti_sci_info(handle);
xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET,
TISCI_MSG_FWL_CHANGE_OWNER,
(u32 *)&req, sizeof(req), sizeof(*resp));
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(info->dev, "Message alloc failed(%d)\n", ret);
return ret;
}
req.fwl_id = owner->fwl_id;
req.region = owner->region;
req.owner_index = owner->owner_index;
ret = ti_sci_do_xfer(info, xfer);
if (ret) {
dev_err(info->dev, "Mbox send fail %d\n", ret);
return ret;
}
resp = (struct ti_sci_msg_fwl_change_owner_info_resp *)xfer->tx_message.buf;
if (!ti_sci_is_response_ack(resp))
return -ENODEV;
owner->fwl_id = resp->fwl_id;
owner->region = resp->region;
owner->owner_index = resp->owner_index;
owner->owner_privid = resp->owner_privid;
owner->owner_permission_bits = resp->owner_permission_bits;
return ret;
}
/*
* ti_sci_setup_ops() - Setup the operations structures
* @info: pointer to TISCI pointer
......@@ -2444,6 +2616,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops;
struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops;
struct ti_sci_fwl_ops *fwl_ops = &ops->fwl_ops;
bops->board_config = ti_sci_cmd_set_board_config;
bops->board_config_rm = ti_sci_cmd_set_board_config_rm;
......@@ -2501,6 +2674,10 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg;
udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg;
udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg;
fwl_ops->set_fwl_region = ti_sci_cmd_set_fwl_region;
fwl_ops->get_fwl_region = ti_sci_cmd_get_fwl_region;
fwl_ops->change_fwl_owner = ti_sci_cmd_change_fwl_owner;
}
/**
......
......@@ -79,6 +79,10 @@
#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232
#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233
#define TISCI_MSG_FWL_SET 0x9000
#define TISCI_MSG_FWL_GET 0x9001
#define TISCI_MSG_FWL_CHANGE_OWNER 0x9002
/**
* struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
* @type: Type of messages: One of TI_SCI_MSG* values
......@@ -1338,4 +1342,121 @@ struct ti_sci_msg_rm_udmap_flow_cfg_resp {
struct ti_sci_msg_hdr hdr;
} __packed;
#define FWL_MAX_PRIVID_SLOTS 3U
/**
* struct ti_sci_msg_fwl_set_firewall_region_req - Request for configuring the firewall permissions.
*
* @hdr: Generic Header
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question. (index starting from 0) In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0)
* @n_permission_regs: Number of permission registers to set
* @control: Contents of the firewall CONTROL register to set
* @permissions: Contents of the firewall PERMISSION register to set
* @start_address: Contents of the firewall START_ADDRESS register to set
* @end_address: Contents of the firewall END_ADDRESS register to set
*/
struct ti_sci_msg_fwl_set_firewall_region_req {
struct ti_sci_msg_hdr hdr;
u16 fwl_id;
u16 region;
u32 n_permission_regs;
u32 control;
u32 permissions[FWL_MAX_PRIVID_SLOTS];
u64 start_address;
u64 end_address;
} __packed;
/**
* struct ti_sci_msg_fwl_get_firewall_region_req - Request for retrieving the firewall permissions
*
* @hdr: Generic Header
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to get config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question (index starting from 0). In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0).
* @n_permission_regs: Number of permission registers to retrieve
*/
struct ti_sci_msg_fwl_get_firewall_region_req {
struct ti_sci_msg_hdr hdr;
u16 fwl_id;
u16 region;
u32 n_permission_regs;
} __packed;
/**
* struct ti_sci_msg_fwl_get_firewall_region_resp - Response for retrieving the firewall permissions
*
* @hdr: Generic Header
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info This field is
* unused in case of a simple firewall and must be initialized to zero. In
* case of a region based firewall, this field indicates the region in
* question. (index starting from 0) In case of a channel based firewall, this
* field indicates the channel in question (index starting from 0)
* @n_permission_regs: Number of permission registers retrieved
* @control: Contents of the firewall CONTROL register
* @permissions: Contents of the firewall PERMISSION registers
* @start_address: Contents of the firewall START_ADDRESS register This is not applicable for channelized firewalls.
* @end_address: Contents of the firewall END_ADDRESS register This is not applicable for channelized firewalls.
*/
struct ti_sci_msg_fwl_get_firewall_region_resp {
struct ti_sci_msg_hdr hdr;
u16 fwl_id;
u16 region;
u32 n_permission_regs;
u32 control;
u32 permissions[FWL_MAX_PRIVID_SLOTS];
u64 start_address;
u64 end_address;
} __packed;
/**
* struct ti_sci_msg_fwl_change_owner_info_req - Request for a firewall owner change
*
* @hdr: Generic Header
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number if applicable
* @owner_index: New owner index to transfer ownership to
*/
struct ti_sci_msg_fwl_change_owner_info_req {
struct ti_sci_msg_hdr hdr;
u16 fwl_id;
u16 region;
u8 owner_index;
} __packed;
/**
* struct ti_sci_msg_fwl_change_owner_info_resp - Response for a firewall owner change
*
* @hdr: Generic Header
*
* @fwl_id: Firewall ID specified in request
* @region: Region or channel number specified in request
* @owner_index: Owner index specified in request
* @owner_privid: New owner priv-ID returned by DMSC.
* @owner_permission_bits: New owner permission bits returned by DMSC.
*/
struct ti_sci_msg_fwl_change_owner_info_resp {
struct ti_sci_msg_hdr hdr;
u16 fwl_id;
u16 region;
u8 owner_index;
u8 owner_privid;
u16 owner_permission_bits;
} __packed;
#endif /* __TI_SCI_H */
......@@ -510,6 +510,68 @@ struct ti_sci_rm_udmap_ops {
const struct ti_sci_msg_rm_udmap_flow_cfg *params);
};
/**
* struct ti_sci_msg_fwl_region_cfg - Request and Response for firewalls settings
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question. (index starting from 0) In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0)
* @n_permission_regs: Number of permission registers to set
* @control: Contents of the firewall CONTROL register to set
* @permissions: Contents of the firewall PERMISSION register to set
* @start_address: Contents of the firewall START_ADDRESS register to set
* @end_address: Contents of the firewall END_ADDRESS register to set
*/
struct ti_sci_msg_fwl_region {
u16 fwl_id;
u16 region;
u32 n_permission_regs;
u32 control;
u32 permissions[3];
u64 start_address;
u64 end_address;
} __packed;
/**
* \brief Request and Response for firewall owner change
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question. (index starting from 0) In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0)
* @n_permission_regs: Number of permission registers <= 3
* @control: Control register value for this region
* @owner_index: New owner index to change to. Owner indexes are setup in DMSC firmware boot configuration data
* @owner_privid: New owner priv-id, used to lookup owner_index is not known, must be set to zero otherwise
* @owner_permission_bits: New owner permission bits
*/
struct ti_sci_msg_fwl_owner {
u16 fwl_id;
u16 region;
u8 owner_index;
u8 owner_privid;
u16 owner_permission_bits;
} __packed;
/**
* struct ti_sci_fwl_ops - Firewall specific operations
* @set_fwl_region: Request for configuring the firewall permissions.
* @get_fwl_region: Request for retrieving the firewall permissions.
* @change_fwl_owner: Request for a change of firewall owner.
*/
struct ti_sci_fwl_ops {
int (*set_fwl_region)(const struct ti_sci_handle *handle, const struct ti_sci_msg_fwl_region *region);
int (*get_fwl_region)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_region *region);
int (*change_fwl_owner)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_owner *owner);
};
/**
* struct ti_sci_ops - Function support for TI SCI
* @board_ops: Miscellaneous operations
......@@ -518,6 +580,7 @@ struct ti_sci_rm_udmap_ops {
* @core_ops: Core specific operations
* @proc_ops: Processor specific operations
* @ring_ops: Ring Accelerator Management operations
* @fw_ops: Firewall specific operations
*/
struct ti_sci_ops {
struct ti_sci_board_ops board_ops;
......@@ -529,6 +592,7 @@ struct ti_sci_ops {
struct ti_sci_rm_ringacc_ops rm_ring_ops;
struct ti_sci_rm_psil_ops rm_psil_ops;
struct ti_sci_rm_udmap_ops rm_udmap_ops;
struct ti_sci_fwl_ops fwl_ops;
};
/**
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册