fdc.c 61.3 KB
Newer Older
B
bellard 已提交
1
/*
2
 * QEMU Floppy disk emulator (Intel 82078)
3
 *
4
 * Copyright (c) 2003, 2007 Jocelyn Mayer
5
 *
B
bellard 已提交
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
B
bellard 已提交
24 25 26 27
/*
 * The controller is used in Sun4m systems in a slightly different
 * way. There are changes in DOR register and DMA is not available.
 */
P
pbrook 已提交
28 29 30 31 32
#include "hw.h"
#include "fdc.h"
#include "block.h"
#include "qemu-timer.h"
#include "isa.h"
B
bellard 已提交
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

/********************************************************/
/* debug Floppy devices */
//#define DEBUG_FLOPPY

#ifdef DEBUG_FLOPPY
#define FLOPPY_DPRINTF(fmt, args...) \
do { printf("FLOPPY: " fmt , ##args); } while (0)
#else
#define FLOPPY_DPRINTF(fmt, args...)
#endif

#define FLOPPY_ERROR(fmt, args...) \
do { printf("FLOPPY ERROR: %s: " fmt, __func__ , ##args); } while (0)

/********************************************************/
/* Floppy drive emulation                               */

/* Will always be a fixed parameter for us */
#define FD_SECTOR_LEN 512
#define FD_SECTOR_SC  2   /* Sector size code */

/* Floppy disk drive emulation */
typedef enum fdisk_type_t {
    FDRIVE_DISK_288   = 0x01, /* 2.88 MB disk           */
    FDRIVE_DISK_144   = 0x02, /* 1.44 MB disk           */
    FDRIVE_DISK_720   = 0x03, /* 720 kB disk            */
60 61
    FDRIVE_DISK_USER  = 0x04, /* User defined geometry  */
    FDRIVE_DISK_NONE  = 0x05, /* No disk                */
B
bellard 已提交
62 63 64 65 66 67 68 69 70
} fdisk_type_t;

typedef enum fdrive_type_t {
    FDRIVE_DRV_144  = 0x00,   /* 1.44 MB 3"5 drive      */
    FDRIVE_DRV_288  = 0x01,   /* 2.88 MB 3"5 drive      */
    FDRIVE_DRV_120  = 0x02,   /* 1.2  MB 5"25 drive     */
    FDRIVE_DRV_NONE = 0x03,   /* No drive connected     */
} fdrive_type_t;

71 72 73 74 75 76 77 78
typedef enum fdrive_flags_t {
    FDRIVE_MOTOR_ON   = 0x01, /* motor on/off           */
} fdrive_flags_t;

typedef enum fdisk_flags_t {
    FDISK_DBL_SIDES  = 0x01,
} fdisk_flags_t;

B
bellard 已提交
79 80 81 82
typedef struct fdrive_t {
    BlockDriverState *bs;
    /* Drive status */
    fdrive_type_t drive;
83
    fdrive_flags_t drflags;
B
bellard 已提交
84 85 86 87 88 89 90 91 92
    uint8_t perpendicular;    /* 2.88 MB access mode    */
    /* Position */
    uint8_t head;
    uint8_t track;
    uint8_t sect;
    /* Last operation status */
    uint8_t dir;              /* Direction              */
    uint8_t rw;               /* Read/write             */
    /* Media */
93
    fdisk_flags_t flags;
B
bellard 已提交
94 95
    uint8_t last_sect;        /* Nb sector per track    */
    uint8_t max_track;        /* Nb of tracks           */
96
    uint16_t bps;             /* Bytes per sector       */
B
bellard 已提交
97 98 99
    uint8_t ro;               /* Is read-only           */
} fdrive_t;

100
static void fd_init (fdrive_t *drv, BlockDriverState *bs)
B
bellard 已提交
101 102
{
    /* Drive */
103
    drv->bs = bs;
B
bellard 已提交
104
    drv->drive = FDRIVE_DRV_NONE;
105
    drv->drflags = 0;
B
bellard 已提交
106 107
    drv->perpendicular = 0;
    /* Disk */
108
    drv->last_sect = 0;
B
bellard 已提交
109 110 111 112
    drv->max_track = 0;
}

static int _fd_sector (uint8_t head, uint8_t track,
113
                       uint8_t sect, uint8_t last_sect)
B
bellard 已提交
114 115 116 117 118 119 120 121 122 123 124 125 126 127
{
    return (((track * 2) + head) * last_sect) + sect - 1;
}

/* Returns current position, in sectors, for given drive */
static int fd_sector (fdrive_t *drv)
{
    return _fd_sector(drv->head, drv->track, drv->sect, drv->last_sect);
}

static int fd_seek (fdrive_t *drv, uint8_t head, uint8_t track, uint8_t sect,
                    int enable_seek)
{
    uint32_t sector;
128 129 130
    int ret;

    if (track > drv->max_track ||
131
        (head != 0 && (drv->flags & FDISK_DBL_SIDES) == 0)) {
132 133 134 135
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
136 137 138
        return 2;
    }
    if (sect > drv->last_sect) {
139 140 141 142
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
143 144 145
        return 3;
    }
    sector = _fd_sector(head, track, sect, drv->last_sect);
146
    ret = 0;
B
bellard 已提交
147 148 149 150 151 152 153 154 155
    if (sector != fd_sector(drv)) {
#if 0
        if (!enable_seek) {
            FLOPPY_ERROR("no implicit seek %d %02x %02x (max=%d %02x %02x)\n",
                         head, track, sect, 1, drv->max_track, drv->last_sect);
            return 4;
        }
#endif
        drv->head = head;
156 157
        if (drv->track != track)
            ret = 1;
B
bellard 已提交
158 159 160 161
        drv->track = track;
        drv->sect = sect;
    }

162
    return ret;
B
bellard 已提交
163 164 165 166 167 168 169 170 171 172 173 174 175
}

/* Set drive back to track 0 */
static void fd_recalibrate (fdrive_t *drv)
{
    FLOPPY_DPRINTF("recalibrate\n");
    drv->head = 0;
    drv->track = 0;
    drv->sect = 1;
    drv->dir = 1;
    drv->rw = 0;
}

176 177 178 179 180 181 182
/* Recognize floppy formats */
typedef struct fd_format_t {
    fdrive_type_t drive;
    fdisk_type_t  disk;
    uint8_t last_sect;
    uint8_t max_track;
    uint8_t max_head;
T
ths 已提交
183
    const char *str;
184 185
} fd_format_t;

B
blueswir1 已提交
186
static const fd_format_t fd_formats[] = {
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
    /* First entry is default format */
    /* 1.44 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 18, 80, 1, "1.44 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 20, 80, 1,  "1.6 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 80, 1, "1.68 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 82, 1, "1.72 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 83, 1, "1.74 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 22, 80, 1, "1.76 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 23, 80, 1, "1.84 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 24, 80, 1, "1.92 MB 3\"1/2", },
    /* 2.88 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 36, 80, 1, "2.88 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 39, 80, 1, "3.12 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 40, 80, 1,  "3.2 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 44, 80, 1, "3.52 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 48, 80, 1, "3.84 MB 3\"1/2", },
    /* 720 kB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 1,  "720 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 80, 1,  "800 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 82, 1,  "820 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 83, 1,  "830 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 13, 80, 1, "1.04 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 14, 80, 1, "1.12 MB 3\"1/2", },
    /* 1.2 MB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 15, 80, 1,  "1.2 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 80, 1, "1.44 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 82, 1, "1.48 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 83, 1, "1.49 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 20, 80, 1,  "1.6 MB 5\"1/4", },
    /* 720 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 80, 1,  "720 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 11, 80, 1,  "880 kB 5\"1/4", },
    /* 360 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 1,  "360 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 0,  "180 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 41, 1,  "410 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 42, 1,  "420 kB 5\"1/4", },
224
    /* 320 kB 5"1/4 floppy disks */
225 226 227 228 229 230 231 232
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 1,  "320 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 0,  "160 kB 5\"1/4", },
    /* 360 kB must match 5"1/4 better than 3"1/2... */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 0,  "360 kB 3\"1/2", },
    /* end */
    { FDRIVE_DRV_NONE, FDRIVE_DISK_NONE, -1, -1, 0, NULL, },
};

B
bellard 已提交
233
/* Revalidate a disk drive after a disk change */
234
static void fd_revalidate (fdrive_t *drv)
B
bellard 已提交
235
{
B
blueswir1 已提交
236
    const fd_format_t *parse;
237
    uint64_t nb_sectors, size;
238
    int i, first_match, match;
239
    int nb_heads, max_track, last_sect, ro;
B
bellard 已提交
240 241

    FLOPPY_DPRINTF("revalidate\n");
242
    if (drv->bs != NULL && bdrv_is_inserted(drv->bs)) {
243 244 245 246
        ro = bdrv_is_read_only(drv->bs);
        bdrv_get_geometry_hint(drv->bs, &nb_heads, &max_track, &last_sect);
        if (nb_heads != 0 && max_track != 0 && last_sect != 0) {
            FLOPPY_DPRINTF("User defined disk (%d %d %d)",
247
                           nb_heads - 1, max_track, last_sect);
248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279
        } else {
            bdrv_get_geometry(drv->bs, &nb_sectors);
            match = -1;
            first_match = -1;
            for (i = 0;; i++) {
                parse = &fd_formats[i];
                if (parse->drive == FDRIVE_DRV_NONE)
                    break;
                if (drv->drive == parse->drive ||
                    drv->drive == FDRIVE_DRV_NONE) {
                    size = (parse->max_head + 1) * parse->max_track *
                        parse->last_sect;
                    if (nb_sectors == size) {
                        match = i;
                        break;
                    }
                    if (first_match == -1)
                        first_match = i;
                }
            }
            if (match == -1) {
                if (first_match == -1)
                    match = 1;
                else
                    match = first_match;
                parse = &fd_formats[match];
            }
            nb_heads = parse->max_head + 1;
            max_track = parse->max_track;
            last_sect = parse->last_sect;
            drv->drive = parse->drive;
            FLOPPY_DPRINTF("%s floppy disk (%d h %d t %d s) %s\n", parse->str,
280
                           nb_heads, max_track, last_sect, ro ? "ro" : "rw");
281 282 283 284 285 286 287 288 289
        }
        if (nb_heads == 1) {
            drv->flags &= ~FDISK_DBL_SIDES;
        } else {
            drv->flags |= FDISK_DBL_SIDES;
        }
        drv->max_track = max_track;
        drv->last_sect = last_sect;
        drv->ro = ro;
B
bellard 已提交
290
    } else {
291
        FLOPPY_DPRINTF("No disk in drive\n");
292
        drv->last_sect = 0;
293 294
        drv->max_track = 0;
        drv->flags &= ~FDISK_DBL_SIDES;
B
bellard 已提交
295
    }
296 297
}

B
bellard 已提交
298 299 300
/* Motor control */
static void fd_start (fdrive_t *drv)
{
301
    drv->drflags |= FDRIVE_MOTOR_ON;
B
bellard 已提交
302 303 304 305
}

static void fd_stop (fdrive_t *drv)
{
306
    drv->drflags &= ~FDRIVE_MOTOR_ON;
B
bellard 已提交
307 308 309 310 311 312 313 314 315 316
}

/* Re-initialise a drives (motor off, repositioned) */
static void fd_reset (fdrive_t *drv)
{
    fd_stop(drv);
    fd_recalibrate(drv);
}

/********************************************************/
B
bellard 已提交
317
/* Intel 82078 floppy disk controller emulation          */
B
bellard 已提交
318

319 320
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq);
static void fdctrl_reset_fifo (fdctrl_t *fdctrl);
B
bellard 已提交
321 322
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len);
323
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status);
324
static void fdctrl_result_timer(void *opaque);
325 326 327 328 329 330 331 332 333 334 335

static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl);
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl);
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl);
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl);
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl);
static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl);
B
bellard 已提交
336 337

enum {
338
    FD_CTRL_ACTIVE = 0x01, /* XXX: suppress that */
B
bellard 已提交
339
    FD_CTRL_RESET  = 0x02,
340 341
    FD_CTRL_SLEEP  = 0x04, /* XXX: suppress that */
    FD_CTRL_BUSY   = 0x08, /* dma transfer in progress */
B
bellard 已提交
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359
    FD_CTRL_INTR   = 0x10,
};

enum {
    FD_DIR_WRITE   = 0,
    FD_DIR_READ    = 1,
    FD_DIR_SCANE   = 2,
    FD_DIR_SCANL   = 3,
    FD_DIR_SCANH   = 4,
};

enum {
    FD_STATE_CMD    = 0x00,
    FD_STATE_STATUS = 0x01,
    FD_STATE_DATA   = 0x02,
    FD_STATE_STATE  = 0x03,
    FD_STATE_MULTI  = 0x10,
    FD_STATE_SEEK   = 0x20,
360
    FD_STATE_FORMAT = 0x40,
B
bellard 已提交
361 362 363
};

#define FD_STATE(state) ((state) & FD_STATE_STATE)
364 365
#define FD_SET_STATE(state, new_state) \
do { (state) = ((state) & ~FD_STATE_STATE) | (new_state); } while (0)
B
bellard 已提交
366 367
#define FD_MULTI_TRACK(state) ((state) & FD_STATE_MULTI)
#define FD_DID_SEEK(state) ((state) & FD_STATE_SEEK)
368
#define FD_FORMAT_CMD(state) ((state) & FD_STATE_FORMAT)
B
bellard 已提交
369

370 371
struct fdctrl_t {
    fdctrl_t *fdctrl;
B
bellard 已提交
372
    /* Controller's identification */
B
bellard 已提交
373 374
    uint8_t version;
    /* HW */
P
pbrook 已提交
375
    qemu_irq irq;
B
bellard 已提交
376
    int dma_chann;
377
    target_phys_addr_t io_base;
B
bellard 已提交
378
    /* Controller state */
379
    QEMUTimer *result_timer;
B
bellard 已提交
380 381 382 383 384
    uint8_t state;
    uint8_t dma_en;
    uint8_t cur_drv;
    uint8_t bootsel;
    /* Command FIFO */
385
    uint8_t *fifo;
B
bellard 已提交
386 387 388 389 390
    uint32_t data_pos;
    uint32_t data_len;
    uint8_t data_state;
    uint8_t data_dir;
    uint8_t int_status;
391
    uint8_t eot; /* last wanted sector */
B
bellard 已提交
392 393 394 395 396 397 398 399 400 401
    /* States kept only to be returned back */
    /* Timers state */
    uint8_t timer0;
    uint8_t timer1;
    /* precompensation */
    uint8_t precomp_trk;
    uint8_t config;
    uint8_t lock;
    /* Power down config (also with status regB access mode */
    uint8_t pwrd;
B
blueswir1 已提交
402
    /* Sun4m quirks? */
B
blueswir1 已提交
403
    int sun4m;
B
bellard 已提交
404 405
    /* Floppy drives */
    fdrive_t drives[2];
406 407 408 409 410 411 412
};

static uint32_t fdctrl_read (void *opaque, uint32_t reg)
{
    fdctrl_t *fdctrl = opaque;
    uint32_t retval;

413
    switch (reg & 0x07) {
B
bellard 已提交
414
    case 0x00:
B
blueswir1 已提交
415
        if (fdctrl->sun4m) {
B
blueswir1 已提交
416 417 418 419 420
            // Identify to Linux as S82078B
            retval = fdctrl_read_statusB(fdctrl);
        } else {
            retval = (uint32_t)(-1);
        }
421
        break;
422
    case 0x01:
423 424
        retval = fdctrl_read_statusB(fdctrl);
        break;
425
    case 0x02:
426 427
        retval = fdctrl_read_dor(fdctrl);
        break;
428
    case 0x03:
429
        retval = fdctrl_read_tape(fdctrl);
430
        break;
431
    case 0x04:
432
        retval = fdctrl_read_main_status(fdctrl);
433
        break;
434
    case 0x05:
435
        retval = fdctrl_read_data(fdctrl);
436
        break;
437
    case 0x07:
438
        retval = fdctrl_read_dir(fdctrl);
439
        break;
440
    default:
441 442
        retval = (uint32_t)(-1);
        break;
443
    }
444
    FLOPPY_DPRINTF("read reg%d: 0x%02x\n", reg & 7, retval);
445 446 447 448 449 450 451 452

    return retval;
}

static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value)
{
    fdctrl_t *fdctrl = opaque;

453 454
    FLOPPY_DPRINTF("write reg%d: 0x%02x\n", reg & 7, value);

455 456
    switch (reg & 0x07) {
    case 0x02:
457 458
        fdctrl_write_dor(fdctrl, value);
        break;
459
    case 0x03:
460
        fdctrl_write_tape(fdctrl, value);
461
        break;
462
    case 0x04:
463
        fdctrl_write_rate(fdctrl, value);
464
        break;
465
    case 0x05:
466
        fdctrl_write_data(fdctrl, value);
467
        break;
468
    default:
469
        break;
470
    }
471 472
}

B
bellard 已提交
473 474
static uint32_t fdctrl_read_mem (void *opaque, target_phys_addr_t reg)
{
475
    return fdctrl_read(opaque, (uint32_t)reg);
B
bellard 已提交
476 477
}

478
static void fdctrl_write_mem (void *opaque,
B
bellard 已提交
479 480
                              target_phys_addr_t reg, uint32_t value)
{
481
    fdctrl_write(opaque, (uint32_t)reg, value);
B
bellard 已提交
482 483
}

B
bellard 已提交
484
static CPUReadMemoryFunc *fdctrl_mem_read[3] = {
B
bellard 已提交
485 486 487
    fdctrl_read_mem,
    fdctrl_read_mem,
    fdctrl_read_mem,
B
bellard 已提交
488 489 490
};

static CPUWriteMemoryFunc *fdctrl_mem_write[3] = {
B
bellard 已提交
491 492 493
    fdctrl_write_mem,
    fdctrl_write_mem,
    fdctrl_write_mem,
B
bellard 已提交
494 495
};

496 497 498 499 500 501 502 503 504 505 506 507
static CPUReadMemoryFunc *fdctrl_mem_read_strict[3] = {
    fdctrl_read_mem,
    NULL,
    NULL,
};

static CPUWriteMemoryFunc *fdctrl_mem_write_strict[3] = {
    fdctrl_write_mem,
    NULL,
    NULL,
};

508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600
static void fd_save (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    tmp = fd->drflags;
    qemu_put_8s(f, &tmp);
    qemu_put_8s(f, &fd->head);
    qemu_put_8s(f, &fd->track);
    qemu_put_8s(f, &fd->sect);
    qemu_put_8s(f, &fd->dir);
    qemu_put_8s(f, &fd->rw);
}

static void fdc_save (QEMUFile *f, void *opaque)
{
    fdctrl_t *s = opaque;

    qemu_put_8s(f, &s->state);
    qemu_put_8s(f, &s->dma_en);
    qemu_put_8s(f, &s->cur_drv);
    qemu_put_8s(f, &s->bootsel);
    qemu_put_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_put_be32s(f, &s->data_pos);
    qemu_put_be32s(f, &s->data_len);
    qemu_put_8s(f, &s->data_state);
    qemu_put_8s(f, &s->data_dir);
    qemu_put_8s(f, &s->int_status);
    qemu_put_8s(f, &s->eot);
    qemu_put_8s(f, &s->timer0);
    qemu_put_8s(f, &s->timer1);
    qemu_put_8s(f, &s->precomp_trk);
    qemu_put_8s(f, &s->config);
    qemu_put_8s(f, &s->lock);
    qemu_put_8s(f, &s->pwrd);
    fd_save(f, &s->drives[0]);
    fd_save(f, &s->drives[1]);
}

static int fd_load (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    qemu_get_8s(f, &tmp);
    fd->drflags = tmp;
    qemu_get_8s(f, &fd->head);
    qemu_get_8s(f, &fd->track);
    qemu_get_8s(f, &fd->sect);
    qemu_get_8s(f, &fd->dir);
    qemu_get_8s(f, &fd->rw);

    return 0;
}

static int fdc_load (QEMUFile *f, void *opaque, int version_id)
{
    fdctrl_t *s = opaque;
    int ret;

    if (version_id != 1)
        return -EINVAL;

    qemu_get_8s(f, &s->state);
    qemu_get_8s(f, &s->dma_en);
    qemu_get_8s(f, &s->cur_drv);
    qemu_get_8s(f, &s->bootsel);
    qemu_get_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_get_be32s(f, &s->data_pos);
    qemu_get_be32s(f, &s->data_len);
    qemu_get_8s(f, &s->data_state);
    qemu_get_8s(f, &s->data_dir);
    qemu_get_8s(f, &s->int_status);
    qemu_get_8s(f, &s->eot);
    qemu_get_8s(f, &s->timer0);
    qemu_get_8s(f, &s->timer1);
    qemu_get_8s(f, &s->precomp_trk);
    qemu_get_8s(f, &s->config);
    qemu_get_8s(f, &s->lock);
    qemu_get_8s(f, &s->pwrd);

    ret = fd_load(f, &s->drives[0]);
    if (ret == 0)
        ret = fd_load(f, &s->drives[1]);

    return ret;
}

static void fdctrl_external_reset(void *opaque)
{
    fdctrl_t *s = opaque;

    fdctrl_reset(s, 0);
}

601 602 603
static fdctrl_t *fdctrl_init_common (qemu_irq irq, int dma_chann,
                                     target_phys_addr_t io_base,
                                     BlockDriverState **fds)
B
bellard 已提交
604
{
605
    fdctrl_t *fdctrl;
B
bellard 已提交
606 607
    int i;

B
bellard 已提交
608
    FLOPPY_DPRINTF("init controller\n");
609 610 611
    fdctrl = qemu_mallocz(sizeof(fdctrl_t));
    if (!fdctrl)
        return NULL;
612 613 614 615 616
    fdctrl->fifo = qemu_memalign(512, FD_SECTOR_LEN);
    if (fdctrl->fifo == NULL) {
        qemu_free(fdctrl);
        return NULL;
    }
617
    fdctrl->result_timer = qemu_new_timer(vm_clock,
618 619
                                          fdctrl_result_timer, fdctrl);

B
bellard 已提交
620
    fdctrl->version = 0x90; /* Intel 82078 controller */
P
pbrook 已提交
621
    fdctrl->irq = irq;
622 623
    fdctrl->dma_chann = dma_chann;
    fdctrl->io_base = io_base;
624
    fdctrl->config = 0x60; /* Implicit seek, polling & FIFO enabled */
625 626 627
    if (fdctrl->dma_chann != -1) {
        fdctrl->dma_en = 1;
        DMA_register_channel(dma_chann, &fdctrl_transfer_handler, fdctrl);
B
bellard 已提交
628
    } else {
629
        fdctrl->dma_en = 0;
B
bellard 已提交
630
    }
631 632
    for (i = 0; i < 2; i++) {
        fd_init(&fdctrl->drives[i], fds[i]);
633
    }
634 635
    fdctrl_reset(fdctrl, 0);
    fdctrl->state = FD_CTRL_ACTIVE;
636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654
    register_savevm("fdc", io_base, 1, fdc_save, fdc_load, fdctrl);
    qemu_register_reset(fdctrl_external_reset, fdctrl);
    for (i = 0; i < 2; i++) {
        fd_revalidate(&fdctrl->drives[i]);
    }

    return fdctrl;
}

fdctrl_t *fdctrl_init (qemu_irq irq, int dma_chann, int mem_mapped,
                       target_phys_addr_t io_base,
                       BlockDriverState **fds)
{
    fdctrl_t *fdctrl;
    int io_mem;

    fdctrl = fdctrl_init_common(irq, dma_chann, io_base, fds);

    fdctrl->sun4m = 0;
B
bellard 已提交
655
    if (mem_mapped) {
656 657
        io_mem = cpu_register_io_memory(0, fdctrl_mem_read, fdctrl_mem_write,
                                        fdctrl);
B
bellard 已提交
658
        cpu_register_physical_memory(io_base, 0x08, io_mem);
B
bellard 已提交
659
    } else {
660 661 662 663 664 665 666 667
        register_ioport_read((uint32_t)io_base + 0x01, 5, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_read((uint32_t)io_base + 0x07, 1, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_write((uint32_t)io_base + 0x01, 5, 1, &fdctrl_write,
                              fdctrl);
        register_ioport_write((uint32_t)io_base + 0x07, 1, 1, &fdctrl_write,
                              fdctrl);
B
bellard 已提交
668
    }
669

670
    return fdctrl;
671
}
B
bellard 已提交
672

B
blueswir1 已提交
673 674 675 676
fdctrl_t *sun4m_fdctrl_init (qemu_irq irq, target_phys_addr_t io_base,
                             BlockDriverState **fds)
{
    fdctrl_t *fdctrl;
677
    int io_mem;
B
blueswir1 已提交
678

679
    fdctrl = fdctrl_init_common(irq, 0, io_base, fds);
B
blueswir1 已提交
680
    fdctrl->sun4m = 1;
681 682 683 684
    io_mem = cpu_register_io_memory(0, fdctrl_mem_read_strict,
                                    fdctrl_mem_write_strict,
                                    fdctrl);
    cpu_register_physical_memory(io_base, 0x08, io_mem);
B
blueswir1 已提交
685 686 687 688

    return fdctrl;
}

689 690
/* XXX: may change if moved to bdrv */
int fdctrl_get_drive_type(fdctrl_t *fdctrl, int drive_num)
691
{
692
    return fdctrl->drives[drive_num].drive;
B
bellard 已提交
693 694 695
}

/* Change IRQ state */
696
static void fdctrl_reset_irq (fdctrl_t *fdctrl)
B
bellard 已提交
697
{
698
    FLOPPY_DPRINTF("Reset interrupt\n");
P
pbrook 已提交
699
    qemu_set_irq(fdctrl->irq, 0);
700
    fdctrl->state &= ~FD_CTRL_INTR;
B
bellard 已提交
701 702
}

703
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status)
B
bellard 已提交
704
{
B
bellard 已提交
705
    // Sparc mutation
B
blueswir1 已提交
706
    if (fdctrl->sun4m && !fdctrl->dma_en) {
707 708 709
        fdctrl->state &= ~FD_CTRL_BUSY;
        fdctrl->int_status = status;
        return;
B
bellard 已提交
710
    }
711
    if (~(fdctrl->state & FD_CTRL_INTR)) {
P
pbrook 已提交
712
        qemu_set_irq(fdctrl->irq, 1);
713
        fdctrl->state |= FD_CTRL_INTR;
B
bellard 已提交
714 715
    }
    FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", status);
716
    fdctrl->int_status = status;
B
bellard 已提交
717 718
}

B
bellard 已提交
719
/* Reset controller */
720
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
B
bellard 已提交
721 722 723
{
    int i;

B
bellard 已提交
724
    FLOPPY_DPRINTF("reset controller\n");
725
    fdctrl_reset_irq(fdctrl);
B
bellard 已提交
726
    /* Initialise controller */
727
    fdctrl->cur_drv = 0;
B
bellard 已提交
728
    /* FIFO state */
729 730 731 732
    fdctrl->data_pos = 0;
    fdctrl->data_len = 0;
    fdctrl->data_state = FD_STATE_CMD;
    fdctrl->data_dir = FD_DIR_WRITE;
B
bellard 已提交
733
    for (i = 0; i < MAX_FD; i++)
734 735
        fd_reset(&fdctrl->drives[i]);
    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
736
    if (do_irq)
737
        fdctrl_raise_irq(fdctrl, 0xc0);
738 739 740 741 742 743 744 745 746 747 748 749 750 751 752
}

static inline fdrive_t *drv0 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[fdctrl->bootsel];
}

static inline fdrive_t *drv1 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[1 - fdctrl->bootsel];
}

static fdrive_t *get_cur_drv (fdctrl_t *fdctrl)
{
    return fdctrl->cur_drv == 0 ? drv0(fdctrl) : drv1(fdctrl);
B
bellard 已提交
753 754 755
}

/* Status B register : 0x01 (read-only) */
756
static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl)
B
bellard 已提交
757 758 759 760 761 762
{
    FLOPPY_DPRINTF("status register: 0x00\n");
    return 0;
}

/* Digital output register : 0x02 */
763
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl)
B
bellard 已提交
764 765 766 767
{
    uint32_t retval = 0;

    /* Drive motors state indicators */
768
    if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
769
        retval |= 1 << 5;
770
    if (drv1(fdctrl)->drflags & FDRIVE_MOTOR_ON)
771
        retval |= 1 << 4;
B
bellard 已提交
772
    /* DMA enable */
773
    retval |= fdctrl->dma_en << 3;
B
bellard 已提交
774
    /* Reset indicator */
775
    retval |= (fdctrl->state & FD_CTRL_RESET) == 0 ? 0x04 : 0;
B
bellard 已提交
776
    /* Selected drive */
777
    retval |= fdctrl->cur_drv;
B
bellard 已提交
778 779 780 781 782
    FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval);

    return retval;
}

783
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
784 785
{
    /* Reset mode */
786
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
787
        if (!(value & 0x04)) {
B
bellard 已提交
788
            FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
789 790 791 792 793 794
            return;
        }
    }
    FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
    /* Drive motors state indicators */
    if (value & 0x20)
795
        fd_start(drv1(fdctrl));
B
bellard 已提交
796
    else
797
        fd_stop(drv1(fdctrl));
B
bellard 已提交
798
    if (value & 0x10)
799
        fd_start(drv0(fdctrl));
B
bellard 已提交
800
    else
801
        fd_stop(drv0(fdctrl));
B
bellard 已提交
802 803
    /* DMA enable */
#if 0
804 805
    if (fdctrl->dma_chann != -1)
        fdctrl->dma_en = 1 - ((value >> 3) & 1);
B
bellard 已提交
806 807 808
#endif
    /* Reset */
    if (!(value & 0x04)) {
809
        if (!(fdctrl->state & FD_CTRL_RESET)) {
B
bellard 已提交
810
            FLOPPY_DPRINTF("controller enter RESET state\n");
811
            fdctrl->state |= FD_CTRL_RESET;
B
bellard 已提交
812 813
        }
    } else {
814
        if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
815
            FLOPPY_DPRINTF("controller out of RESET state\n");
816
            fdctrl_reset(fdctrl, 1);
817
            fdctrl->state &= ~(FD_CTRL_RESET | FD_CTRL_SLEEP);
B
bellard 已提交
818 819 820
        }
    }
    /* Selected drive */
821
    fdctrl->cur_drv = value & 1;
B
bellard 已提交
822 823 824
}

/* Tape drive register : 0x03 */
825
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl)
B
bellard 已提交
826 827 828 829
{
    uint32_t retval = 0;

    /* Disk boot selection indicator */
830
    retval |= fdctrl->bootsel << 2;
B
bellard 已提交
831 832 833 834 835 836
    /* Tape indicators: never allowed */
    FLOPPY_DPRINTF("tape drive register: 0x%02x\n", retval);

    return retval;
}

837
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
838 839
{
    /* Reset mode */
840
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
841
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
842 843 844 845
        return;
    }
    FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
    /* Disk boot selection indicator */
846
    fdctrl->bootsel = (value >> 2) & 1;
B
bellard 已提交
847 848 849 850
    /* Tape indicators: never allow */
}

/* Main status register : 0x04 (read) */
851
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
B
bellard 已提交
852 853 854
{
    uint32_t retval = 0;

855 856
    fdctrl->state &= ~(FD_CTRL_SLEEP | FD_CTRL_RESET);
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
857 858 859
        /* Data transfer allowed */
        retval |= 0x80;
        /* Data transfer direction indicator */
860
        if (fdctrl->data_dir == FD_DIR_READ)
B
bellard 已提交
861 862 863 864
            retval |= 0x40;
    }
    /* Should handle 0x20 for SPECIFY command */
    /* Command busy indicator */
865 866
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA ||
        FD_STATE(fdctrl->data_state) == FD_STATE_STATUS)
B
bellard 已提交
867 868 869 870 871 872 873
        retval |= 0x10;
    FLOPPY_DPRINTF("main status register: 0x%02x\n", retval);

    return retval;
}

/* Data select rate register : 0x04 (write) */
874
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
875 876
{
    /* Reset mode */
877
    if (fdctrl->state & FD_CTRL_RESET) {
878 879 880
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
        return;
    }
B
bellard 已提交
881 882 883
    FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
    /* Reset: autoclear */
    if (value & 0x80) {
884 885 886
        fdctrl->state |= FD_CTRL_RESET;
        fdctrl_reset(fdctrl, 1);
        fdctrl->state &= ~FD_CTRL_RESET;
B
bellard 已提交
887 888
    }
    if (value & 0x40) {
889 890
        fdctrl->state |= FD_CTRL_SLEEP;
        fdctrl_reset(fdctrl, 1);
B
bellard 已提交
891 892 893 894
    }
//        fdctrl.precomp = (value >> 2) & 0x07;
}

B
bellard 已提交
895 896 897
static int fdctrl_media_changed(fdrive_t *drv)
{
    int ret;
898

899
    if (!drv->bs)
B
bellard 已提交
900 901 902 903 904 905 906 907
        return 0;
    ret = bdrv_media_changed(drv->bs);
    if (ret) {
        fd_revalidate(drv);
    }
    return ret;
}

B
bellard 已提交
908
/* Digital input register : 0x07 (read-only) */
909
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl)
B
bellard 已提交
910 911 912
{
    uint32_t retval = 0;

B
bellard 已提交
913
    if (fdctrl_media_changed(drv0(fdctrl)) ||
914
        fdctrl_media_changed(drv1(fdctrl)))
B
bellard 已提交
915 916
        retval |= 0x80;
    if (retval != 0)
917
        FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
B
bellard 已提交
918 919 920 921 922

    return retval;
}

/* FIFO state control */
923
static void fdctrl_reset_fifo (fdctrl_t *fdctrl)
B
bellard 已提交
924
{
925 926 927
    fdctrl->data_dir = FD_DIR_WRITE;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_CMD);
B
bellard 已提交
928 929 930
}

/* Set FIFO status for the host to read */
931
static void fdctrl_set_fifo (fdctrl_t *fdctrl, int fifo_len, int do_irq)
B
bellard 已提交
932
{
933 934 935 936
    fdctrl->data_dir = FD_DIR_READ;
    fdctrl->data_len = fifo_len;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_STATUS);
B
bellard 已提交
937
    if (do_irq)
938
        fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
939 940 941
}

/* Set an error: unimplemented/unknown command */
942
static void fdctrl_unimplemented (fdctrl_t *fdctrl)
B
bellard 已提交
943 944
{
#if 0
945 946 947
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
948
    fdctrl->fifo[0] = 0x60 | (cur_drv->head << 2) | fdctrl->cur_drv;
949 950 951
    fdctrl->fifo[1] = 0x00;
    fdctrl->fifo[2] = 0x00;
    fdctrl_set_fifo(fdctrl, 3, 1);
B
bellard 已提交
952
#else
953 954 955
    //    fdctrl_reset_fifo(fdctrl);
    fdctrl->fifo[0] = 0x80;
    fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
956 957 958 959
#endif
}

/* Callback for transfer end (stop or abort) */
960
static void fdctrl_stop_transfer (fdctrl_t *fdctrl, uint8_t status0,
961
                                  uint8_t status1, uint8_t status2)
B
bellard 已提交
962
{
963
    fdrive_t *cur_drv;
B
bellard 已提交
964

965
    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
966 967
    FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n",
                   status0, status1, status2,
968 969
                   status0 | (cur_drv->head << 2) | fdctrl->cur_drv);
    fdctrl->fifo[0] = status0 | (cur_drv->head << 2) | fdctrl->cur_drv;
970 971 972 973 974 975 976
    fdctrl->fifo[1] = status1;
    fdctrl->fifo[2] = status2;
    fdctrl->fifo[3] = cur_drv->track;
    fdctrl->fifo[4] = cur_drv->head;
    fdctrl->fifo[5] = cur_drv->sect;
    fdctrl->fifo[6] = FD_SECTOR_SC;
    fdctrl->data_dir = FD_DIR_READ;
977
    if (fdctrl->state & FD_CTRL_BUSY) {
978
        DMA_release_DREQ(fdctrl->dma_chann);
979 980
        fdctrl->state &= ~FD_CTRL_BUSY;
    }
981
    fdctrl_set_fifo(fdctrl, 7, 1);
B
bellard 已提交
982 983 984
}

/* Prepare a data transfer (either DMA or FIFO) */
985
static void fdctrl_start_transfer (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
986
{
987
    fdrive_t *cur_drv;
B
bellard 已提交
988 989 990
    uint8_t kh, kt, ks;
    int did_seek;

991 992 993 994 995
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[2];
    kh = fdctrl->fifo[3];
    ks = fdctrl->fifo[4];
B
bellard 已提交
996
    FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n",
997
                   fdctrl->cur_drv, kh, kt, ks,
B
bellard 已提交
998 999
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
1000
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
B
bellard 已提交
1001 1002
    case 2:
        /* sect too big */
1003 1004 1005 1006
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
1007 1008 1009
        return;
    case 3:
        /* track too big */
1010 1011 1012 1013
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
1014 1015 1016
        return;
    case 4:
        /* No seek enabled */
1017 1018 1019 1020
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
1021 1022 1023 1024 1025 1026 1027 1028
        return;
    case 1:
        did_seek = 1;
        break;
    default:
        break;
    }
    /* Set the FIFO state */
1029 1030 1031 1032 1033 1034 1035
    fdctrl->data_dir = direction;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_DATA); /* FIFO ready for data */
    if (fdctrl->fifo[0] & 0x80)
        fdctrl->data_state |= FD_STATE_MULTI;
    else
        fdctrl->data_state &= ~FD_STATE_MULTI;
B
bellard 已提交
1036
    if (did_seek)
1037 1038 1039 1040 1041 1042
        fdctrl->data_state |= FD_STATE_SEEK;
    else
        fdctrl->data_state &= ~FD_STATE_SEEK;
    if (fdctrl->fifo[5] == 00) {
        fdctrl->data_len = fdctrl->fifo[8];
    } else {
1043
        int tmp;
T
ths 已提交
1044
        fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]);
1045 1046 1047
        tmp = (cur_drv->last_sect - ks + 1);
        if (fdctrl->fifo[0] & 0x80)
            tmp += cur_drv->last_sect;
1048
        fdctrl->data_len *= tmp;
1049
    }
1050
    fdctrl->eot = fdctrl->fifo[6];
1051
    if (fdctrl->dma_en) {
B
bellard 已提交
1052 1053
        int dma_mode;
        /* DMA transfer are enabled. Check if DMA channel is well programmed */
1054
        dma_mode = DMA_get_channel_mode(fdctrl->dma_chann);
B
bellard 已提交
1055
        dma_mode = (dma_mode >> 2) & 3;
1056
        FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
1057
                       dma_mode, direction,
1058
                       (128 << fdctrl->fifo[5]) *
1059
                       (cur_drv->last_sect - ks + 1), fdctrl->data_len);
B
bellard 已提交
1060 1061 1062 1063 1064
        if (((direction == FD_DIR_SCANE || direction == FD_DIR_SCANL ||
              direction == FD_DIR_SCANH) && dma_mode == 0) ||
            (direction == FD_DIR_WRITE && dma_mode == 2) ||
            (direction == FD_DIR_READ && dma_mode == 1)) {
            /* No access is allowed until DMA transfer has completed */
1065
            fdctrl->state |= FD_CTRL_BUSY;
B
bellard 已提交
1066
            /* Now, we just have to wait for the DMA controller to
B
bellard 已提交
1067 1068
             * recall us...
             */
1069 1070
            DMA_hold_DREQ(fdctrl->dma_chann);
            DMA_schedule(fdctrl->dma_chann);
B
bellard 已提交
1071
            return;
1072
        } else {
1073
            FLOPPY_ERROR("dma_mode=%d direction=%d\n", dma_mode, direction);
B
bellard 已提交
1074 1075 1076 1077
        }
    }
    FLOPPY_DPRINTF("start non-DMA transfer\n");
    /* IO based transfer: calculate len */
1078
    fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
1079 1080 1081 1082 1083

    return;
}

/* Prepare a transfer of deleted data */
1084
static void fdctrl_start_transfer_del (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
1085 1086 1087 1088
{
    /* We don't handle deleted data,
     * so we don't return *ANYTHING*
     */
1089
    fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
B
bellard 已提交
1090 1091 1092
}

/* handlers for DMA transfers */
B
bellard 已提交
1093 1094
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len)
B
bellard 已提交
1095
{
1096 1097 1098
    fdctrl_t *fdctrl;
    fdrive_t *cur_drv;
    int len, start_pos, rel_pos;
B
bellard 已提交
1099 1100
    uint8_t status0 = 0x00, status1 = 0x00, status2 = 0x00;

1101 1102
    fdctrl = opaque;
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
1103 1104 1105
        FLOPPY_DPRINTF("Not in DMA transfer mode !\n");
        return 0;
    }
1106 1107 1108
    cur_drv = get_cur_drv(fdctrl);
    if (fdctrl->data_dir == FD_DIR_SCANE || fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1109
        status2 = 0x04;
B
bellard 已提交
1110 1111
    if (dma_len > fdctrl->data_len)
        dma_len = fdctrl->data_len;
1112
    if (cur_drv->bs == NULL) {
1113 1114 1115 1116 1117
        if (fdctrl->data_dir == FD_DIR_WRITE)
            fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
        else
            fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        len = 0;
1118 1119
        goto transfer_error;
    }
1120
    rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
B
bellard 已提交
1121 1122
    for (start_pos = fdctrl->data_pos; fdctrl->data_pos < dma_len;) {
        len = dma_len - fdctrl->data_pos;
1123 1124
        if (len + rel_pos > FD_SECTOR_LEN)
            len = FD_SECTOR_LEN - rel_pos;
B
bellard 已提交
1125 1126
        FLOPPY_DPRINTF("copy %d bytes (%d %d %d) %d pos %d %02x "
                       "(%d-0x%08x 0x%08x)\n", len, dma_len, fdctrl->data_pos,
1127 1128
                       fdctrl->data_len, fdctrl->cur_drv, cur_drv->head,
                       cur_drv->track, cur_drv->sect, fd_sector(cur_drv),
B
bellard 已提交
1129
                       fd_sector(cur_drv) * 512);
1130
        if (fdctrl->data_dir != FD_DIR_WRITE ||
1131
            len < FD_SECTOR_LEN || rel_pos != 0) {
1132 1133
            /* READ & SCAN commands and realign to a sector for WRITE */
            if (bdrv_read(cur_drv->bs, fd_sector(cur_drv),
1134
                          fdctrl->fifo, 1) < 0) {
B
bellard 已提交
1135 1136 1137
                FLOPPY_DPRINTF("Floppy: error getting sector %d\n",
                               fd_sector(cur_drv));
                /* Sure, image size is too small... */
1138
                memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
B
bellard 已提交
1139
            }
1140
        }
1141 1142 1143
        switch (fdctrl->data_dir) {
        case FD_DIR_READ:
            /* READ commands */
B
bellard 已提交
1144 1145
            DMA_write_memory (nchan, fdctrl->fifo + rel_pos,
                              fdctrl->data_pos, len);
1146 1147
            break;
        case FD_DIR_WRITE:
1148
            /* WRITE commands */
B
bellard 已提交
1149 1150
            DMA_read_memory (nchan, fdctrl->fifo + rel_pos,
                             fdctrl->data_pos, len);
1151
            if (bdrv_write(cur_drv->bs, fd_sector(cur_drv),
1152
                           fdctrl->fifo, 1) < 0) {
1153 1154 1155
                FLOPPY_ERROR("writting sector %d\n", fd_sector(cur_drv));
                fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
                goto transfer_error;
1156
            }
1157 1158 1159
            break;
        default:
            /* SCAN commands */
1160
            {
1161
                uint8_t tmpbuf[FD_SECTOR_LEN];
1162
                int ret;
B
bellard 已提交
1163
                DMA_read_memory (nchan, tmpbuf, fdctrl->data_pos, len);
1164
                ret = memcmp(tmpbuf, fdctrl->fifo + rel_pos, len);
B
bellard 已提交
1165 1166 1167 1168
                if (ret == 0) {
                    status2 = 0x08;
                    goto end_transfer;
                }
1169 1170
                if ((ret < 0 && fdctrl->data_dir == FD_DIR_SCANL) ||
                    (ret > 0 && fdctrl->data_dir == FD_DIR_SCANH)) {
B
bellard 已提交
1171 1172 1173 1174
                    status2 = 0x00;
                    goto end_transfer;
                }
            }
1175
            break;
B
bellard 已提交
1176
        }
1177 1178
        fdctrl->data_pos += len;
        rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
1179
        if (rel_pos == 0) {
B
bellard 已提交
1180
            /* Seek to next sector */
1181 1182 1183 1184
            FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d) (%d)\n",
                           cur_drv->head, cur_drv->track, cur_drv->sect,
                           fd_sector(cur_drv),
                           fdctrl->data_pos - len);
1185 1186 1187 1188
            /* XXX: cur_drv->sect >= cur_drv->last_sect should be an
               error in fact */
            if (cur_drv->sect >= cur_drv->last_sect ||
                cur_drv->sect == fdctrl->eot) {
1189 1190 1191 1192
                cur_drv->sect = 1;
                if (FD_MULTI_TRACK(fdctrl->data_state)) {
                    if (cur_drv->head == 0 &&
                        (cur_drv->flags & FDISK_DBL_SIDES) != 0) {
1193 1194 1195
                        cur_drv->head = 1;
                    } else {
                        cur_drv->head = 0;
1196 1197 1198
                        cur_drv->track++;
                        if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
                            break;
1199 1200 1201 1202
                    }
                } else {
                    cur_drv->track++;
                    break;
B
bellard 已提交
1203
                }
1204 1205 1206
                FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
                               cur_drv->head, cur_drv->track,
                               cur_drv->sect, fd_sector(cur_drv));
1207 1208
            } else {
                cur_drv->sect++;
B
bellard 已提交
1209 1210 1211
            }
        }
    }
1212
 end_transfer:
1213 1214
    len = fdctrl->data_pos - start_pos;
    FLOPPY_DPRINTF("end transfer %d %d %d\n",
1215
                   fdctrl->data_pos, len, fdctrl->data_len);
1216 1217 1218
    if (fdctrl->data_dir == FD_DIR_SCANE ||
        fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1219
        status2 = 0x08;
1220
    if (FD_DID_SEEK(fdctrl->data_state))
B
bellard 已提交
1221
        status0 |= 0x20;
1222 1223
    fdctrl->data_len -= len;
    //    if (fdctrl->data_len == 0)
1224
    fdctrl_stop_transfer(fdctrl, status0, status1, status2);
1225
 transfer_error:
B
bellard 已提交
1226

1227
    return len;
B
bellard 已提交
1228 1229 1230
}

/* Data register : 0x05 */
1231
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl)
B
bellard 已提交
1232
{
1233
    fdrive_t *cur_drv;
B
bellard 已提交
1234 1235 1236
    uint32_t retval = 0;
    int pos, len;

1237 1238 1239
    cur_drv = get_cur_drv(fdctrl);
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_CMD) {
B
bellard 已提交
1240 1241 1242
        FLOPPY_ERROR("can't read data in CMD state\n");
        return 0;
    }
1243 1244
    pos = fdctrl->data_pos;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1245 1246
        pos %= FD_SECTOR_LEN;
        if (pos == 0) {
1247
            len = fdctrl->data_len - fdctrl->data_pos;
B
bellard 已提交
1248 1249
            if (len > FD_SECTOR_LEN)
                len = FD_SECTOR_LEN;
1250
            bdrv_read(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1251 1252
        }
    }
1253 1254 1255
    retval = fdctrl->fifo[pos];
    if (++fdctrl->data_pos == fdctrl->data_len) {
        fdctrl->data_pos = 0;
1256
        /* Switch from transfer mode to status mode
B
bellard 已提交
1257 1258
         * then from status mode to command mode
         */
1259
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
1260
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
1261
        } else {
1262
            fdctrl_reset_fifo(fdctrl);
1263 1264
            fdctrl_reset_irq(fdctrl);
        }
B
bellard 已提交
1265 1266 1267 1268 1269 1270
    }
    FLOPPY_DPRINTF("data register: 0x%02x\n", retval);

    return retval;
}

1271
static void fdctrl_format_sector (fdctrl_t *fdctrl)
B
bellard 已提交
1272
{
1273 1274 1275
    fdrive_t *cur_drv;
    uint8_t kh, kt, ks;
    int did_seek;
B
bellard 已提交
1276

1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[6];
    kh = fdctrl->fifo[7];
    ks = fdctrl->fifo[8];
    FLOPPY_DPRINTF("format sector at %d %d %02x %02x (%d)\n",
                   fdctrl->cur_drv, kh, kt, ks,
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
    case 2:
        /* sect too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 3:
        /* track too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 4:
        /* No seek enabled */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 1:
        did_seek = 1;
        fdctrl->data_state |= FD_STATE_SEEK;
        break;
    default:
        break;
    }
    memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
    if (cur_drv->bs == NULL ||
        bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1) < 0) {
T
ths 已提交
1318
        FLOPPY_ERROR("formatting sector %d\n", fd_sector(cur_drv));
1319 1320
        fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
    } else {
1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332
        if (cur_drv->sect == cur_drv->last_sect) {
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            /* Last sector done */
            if (FD_DID_SEEK(fdctrl->data_state))
                fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
            else
                fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
        } else {
            /* More to do */
            fdctrl->data_pos = 0;
            fdctrl->data_len = 4;
        }
1333 1334 1335 1336 1337 1338 1339 1340
    }
}

static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
{
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1341
    /* Reset mode */
1342
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
1343
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
1344 1345
        return;
    }
1346 1347
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_STATUS) {
B
bellard 已提交
1348 1349 1350 1351
        FLOPPY_ERROR("can't write data in status mode\n");
        return;
    }
    /* Is it write command time ? */
1352
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1353
        /* FIFO data write */
1354 1355 1356
        fdctrl->fifo[fdctrl->data_pos++] = value;
        if (fdctrl->data_pos % FD_SECTOR_LEN == (FD_SECTOR_LEN - 1) ||
            fdctrl->data_pos == fdctrl->data_len) {
1357
            bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1358
        }
1359
        /* Switch from transfer mode to status mode
B
bellard 已提交
1360 1361
         * then from status mode to command mode
         */
1362 1363
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA)
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1364 1365
        return;
    }
1366
    if (fdctrl->data_pos == 0) {
B
bellard 已提交
1367 1368 1369 1370 1371 1372
        /* Command */
        switch (value & 0x5F) {
        case 0x46:
            /* READ variants */
            FLOPPY_DPRINTF("READ command\n");
            /* 8 parameters cmd */
1373
            fdctrl->data_len = 9;
B
bellard 已提交
1374 1375 1376 1377 1378
            goto enqueue;
        case 0x4C:
            /* READ_DELETED variants */
            FLOPPY_DPRINTF("READ_DELETED command\n");
            /* 8 parameters cmd */
1379
            fdctrl->data_len = 9;
B
bellard 已提交
1380 1381 1382 1383 1384
            goto enqueue;
        case 0x50:
            /* SCAN_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_EQUAL command\n");
            /* 8 parameters cmd */
1385
            fdctrl->data_len = 9;
B
bellard 已提交
1386 1387 1388 1389 1390
            goto enqueue;
        case 0x56:
            /* VERIFY variants */
            FLOPPY_DPRINTF("VERIFY command\n");
            /* 8 parameters cmd */
1391
            fdctrl->data_len = 9;
B
bellard 已提交
1392 1393 1394 1395 1396
            goto enqueue;
        case 0x59:
            /* SCAN_LOW_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_LOW_OR_EQUAL command\n");
            /* 8 parameters cmd */
1397
            fdctrl->data_len = 9;
B
bellard 已提交
1398 1399 1400 1401 1402
            goto enqueue;
        case 0x5D:
            /* SCAN_HIGH_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_HIGH_OR_EQUAL command\n");
            /* 8 parameters cmd */
1403
            fdctrl->data_len = 9;
B
bellard 已提交
1404 1405 1406 1407 1408 1409 1410 1411 1412
            goto enqueue;
        default:
            break;
        }
        switch (value & 0x7F) {
        case 0x45:
            /* WRITE variants */
            FLOPPY_DPRINTF("WRITE command\n");
            /* 8 parameters cmd */
1413
            fdctrl->data_len = 9;
B
bellard 已提交
1414 1415 1416 1417 1418
            goto enqueue;
        case 0x49:
            /* WRITE_DELETED variants */
            FLOPPY_DPRINTF("WRITE_DELETED command\n");
            /* 8 parameters cmd */
1419
            fdctrl->data_len = 9;
B
bellard 已提交
1420 1421 1422 1423 1424 1425 1426 1427 1428
            goto enqueue;
        default:
            break;
        }
        switch (value) {
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("SPECIFY command\n");
            /* 1 parameter cmd */
1429
            fdctrl->data_len = 3;
B
bellard 已提交
1430 1431 1432 1433 1434
            goto enqueue;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("SENSE_DRIVE_STATUS command\n");
            /* 1 parameter cmd */
1435
            fdctrl->data_len = 2;
B
bellard 已提交
1436 1437 1438 1439 1440
            goto enqueue;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("RECALIBRATE command\n");
            /* 1 parameter cmd */
1441
            fdctrl->data_len = 2;
B
bellard 已提交
1442 1443 1444 1445
            goto enqueue;
        case 0x08:
            /* SENSE_INTERRUPT_STATUS */
            FLOPPY_DPRINTF("SENSE_INTERRUPT_STATUS command (%02x)\n",
1446
                           fdctrl->int_status);
B
bellard 已提交
1447
            /* No parameters cmd: returns status if no interrupt */
B
bellard 已提交
1448
#if 0
1449 1450
            fdctrl->fifo[0] =
                fdctrl->int_status | (cur_drv->head << 2) | fdctrl->cur_drv;
B
bellard 已提交
1451 1452 1453 1454 1455 1456 1457
#else
            /* XXX: int_status handling is broken for read/write
               commands, so we do this hack. It should be suppressed
               ASAP */
            fdctrl->fifo[0] =
                0x20 | (cur_drv->head << 2) | fdctrl->cur_drv;
#endif
1458 1459
            fdctrl->fifo[1] = cur_drv->track;
            fdctrl_set_fifo(fdctrl, 2, 0);
1460 1461
            fdctrl_reset_irq(fdctrl);
            fdctrl->int_status = 0xC0;
B
bellard 已提交
1462 1463 1464 1465 1466
            return;
        case 0x0E:
            /* DUMPREG */
            FLOPPY_DPRINTF("DUMPREG command\n");
            /* Drives position */
1467 1468 1469 1470
            fdctrl->fifo[0] = drv0(fdctrl)->track;
            fdctrl->fifo[1] = drv1(fdctrl)->track;
            fdctrl->fifo[2] = 0;
            fdctrl->fifo[3] = 0;
B
bellard 已提交
1471
            /* timers */
1472 1473 1474 1475
            fdctrl->fifo[4] = fdctrl->timer0;
            fdctrl->fifo[5] = (fdctrl->timer1 << 1) | fdctrl->dma_en;
            fdctrl->fifo[6] = cur_drv->last_sect;
            fdctrl->fifo[7] = (fdctrl->lock << 7) |
1476
                (cur_drv->perpendicular << 2);
1477 1478 1479
            fdctrl->fifo[8] = fdctrl->config;
            fdctrl->fifo[9] = fdctrl->precomp_trk;
            fdctrl_set_fifo(fdctrl, 10, 0);
B
bellard 已提交
1480 1481 1482 1483 1484
            return;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("SEEK command\n");
            /* 2 parameters cmd */
1485
            fdctrl->data_len = 3;
B
bellard 已提交
1486 1487 1488 1489 1490
            goto enqueue;
        case 0x10:
            /* VERSION */
            FLOPPY_DPRINTF("VERSION command\n");
            /* No parameters cmd */
B
bellard 已提交
1491
            /* Controller's version */
1492 1493
            fdctrl->fifo[0] = fdctrl->version;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1494 1495 1496 1497 1498
            return;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("PERPENDICULAR_MODE command\n");
            /* 1 parameter cmd */
1499
            fdctrl->data_len = 2;
B
bellard 已提交
1500 1501 1502 1503 1504
            goto enqueue;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("CONFIGURE command\n");
            /* 3 parameters cmd */
1505
            fdctrl->data_len = 4;
B
bellard 已提交
1506 1507 1508 1509 1510
            goto enqueue;
        case 0x14:
            /* UNLOCK */
            FLOPPY_DPRINTF("UNLOCK command\n");
            /* No parameters cmd */
1511 1512 1513
            fdctrl->lock = 0;
            fdctrl->fifo[0] = 0;
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1514 1515 1516 1517 1518
            return;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("POWERDOWN_MODE command\n");
            /* 2 parameters cmd */
1519
            fdctrl->data_len = 3;
B
bellard 已提交
1520 1521 1522 1523 1524
            goto enqueue;
        case 0x18:
            /* PART_ID */
            FLOPPY_DPRINTF("PART_ID command\n");
            /* No parameters cmd */
1525 1526
            fdctrl->fifo[0] = 0x41; /* Stepping 1 */
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1527 1528 1529 1530 1531
            return;
        case 0x2C:
            /* SAVE */
            FLOPPY_DPRINTF("SAVE command\n");
            /* No parameters cmd */
1532 1533
            fdctrl->fifo[0] = 0;
            fdctrl->fifo[1] = 0;
B
bellard 已提交
1534
            /* Drives position */
1535 1536 1537 1538
            fdctrl->fifo[2] = drv0(fdctrl)->track;
            fdctrl->fifo[3] = drv1(fdctrl)->track;
            fdctrl->fifo[4] = 0;
            fdctrl->fifo[5] = 0;
B
bellard 已提交
1539
            /* timers */
1540 1541 1542 1543
            fdctrl->fifo[6] = fdctrl->timer0;
            fdctrl->fifo[7] = fdctrl->timer1;
            fdctrl->fifo[8] = cur_drv->last_sect;
            fdctrl->fifo[9] = (fdctrl->lock << 7) |
1544
                (cur_drv->perpendicular << 2);
1545 1546 1547 1548 1549 1550
            fdctrl->fifo[10] = fdctrl->config;
            fdctrl->fifo[11] = fdctrl->precomp_trk;
            fdctrl->fifo[12] = fdctrl->pwrd;
            fdctrl->fifo[13] = 0;
            fdctrl->fifo[14] = 0;
            fdctrl_set_fifo(fdctrl, 15, 1);
B
bellard 已提交
1551 1552 1553 1554 1555
            return;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("OPTION command\n");
            /* 1 parameter cmd */
1556
            fdctrl->data_len = 2;
B
bellard 已提交
1557 1558 1559 1560 1561
            goto enqueue;
        case 0x42:
            /* READ_TRACK */
            FLOPPY_DPRINTF("READ_TRACK command\n");
            /* 8 parameters cmd */
1562
            fdctrl->data_len = 9;
B
bellard 已提交
1563 1564 1565 1566 1567
            goto enqueue;
        case 0x4A:
            /* READ_ID */
            FLOPPY_DPRINTF("READ_ID command\n");
            /* 1 parameter cmd */
1568
            fdctrl->data_len = 2;
B
bellard 已提交
1569 1570 1571 1572 1573
            goto enqueue;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("RESTORE command\n");
            /* 17 parameters cmd */
1574
            fdctrl->data_len = 18;
B
bellard 已提交
1575 1576 1577 1578 1579
            goto enqueue;
        case 0x4D:
            /* FORMAT_TRACK */
            FLOPPY_DPRINTF("FORMAT_TRACK command\n");
            /* 5 parameters cmd */
1580
            fdctrl->data_len = 6;
B
bellard 已提交
1581 1582 1583 1584 1585
            goto enqueue;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("DRIVE_SPECIFICATION_COMMAND command\n");
            /* 5 parameters cmd */
1586
            fdctrl->data_len = 6;
B
bellard 已提交
1587 1588 1589 1590 1591
            goto enqueue;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("RELATIVE_SEEK_OUT command\n");
            /* 2 parameters cmd */
1592
            fdctrl->data_len = 3;
B
bellard 已提交
1593 1594 1595 1596 1597
            goto enqueue;
        case 0x94:
            /* LOCK */
            FLOPPY_DPRINTF("LOCK command\n");
            /* No parameters cmd */
1598 1599 1600
            fdctrl->lock = 1;
            fdctrl->fifo[0] = 0x10;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1601 1602 1603 1604 1605
            return;
        case 0xCD:
            /* FORMAT_AND_WRITE */
            FLOPPY_DPRINTF("FORMAT_AND_WRITE command\n");
            /* 10 parameters cmd */
1606
            fdctrl->data_len = 11;
B
bellard 已提交
1607 1608 1609 1610 1611
            goto enqueue;
        case 0xCF:
            /* RELATIVE_SEEK_IN */
            FLOPPY_DPRINTF("RELATIVE_SEEK_IN command\n");
            /* 2 parameters cmd */
1612
            fdctrl->data_len = 3;
B
bellard 已提交
1613 1614 1615 1616
            goto enqueue;
        default:
            /* Unknown command */
            FLOPPY_ERROR("unknown command: 0x%02x\n", value);
1617
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1618 1619 1620
            return;
        }
    }
1621
 enqueue:
1622 1623 1624
    FLOPPY_DPRINTF("%s: %02x\n", __func__, value);
    fdctrl->fifo[fdctrl->data_pos] = value;
    if (++fdctrl->data_pos == fdctrl->data_len) {
B
bellard 已提交
1625 1626 1627
        /* We now have all parameters
         * and will be able to treat the command
         */
1628 1629
        if (fdctrl->data_state & FD_STATE_FORMAT) {
            fdctrl_format_sector(fdctrl);
B
bellard 已提交
1630 1631
            return;
        }
1632 1633 1634 1635 1636 1637 1638 1639
        switch (fdctrl->fifo[0] & 0x1F) {
        case 0x06:
            {
                /* READ variants */
                FLOPPY_DPRINTF("treat READ command\n");
                fdctrl_start_transfer(fdctrl, FD_DIR_READ);
                return;
            }
B
bellard 已提交
1640 1641 1642 1643
        case 0x0C:
            /* READ_DELETED variants */
//            FLOPPY_DPRINTF("treat READ_DELETED command\n");
            FLOPPY_ERROR("treat READ_DELETED command\n");
1644
            fdctrl_start_transfer_del(fdctrl, FD_DIR_READ);
B
bellard 已提交
1645 1646 1647 1648 1649
            return;
        case 0x16:
            /* VERIFY variants */
//            FLOPPY_DPRINTF("treat VERIFY command\n");
            FLOPPY_ERROR("treat VERIFY command\n");
1650
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1651 1652 1653 1654 1655
            return;
        case 0x10:
            /* SCAN_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_EQUAL command\n");
1656
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANE);
B
bellard 已提交
1657 1658 1659 1660 1661
            return;
        case 0x19:
            /* SCAN_LOW_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_LOW_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_LOW_OR_EQUAL command\n");
1662
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANL);
B
bellard 已提交
1663 1664 1665 1666 1667
            return;
        case 0x1D:
            /* SCAN_HIGH_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_HIGH_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_HIGH_OR_EQUAL command\n");
1668
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANH);
B
bellard 已提交
1669 1670 1671 1672
            return;
        default:
            break;
        }
1673
        switch (fdctrl->fifo[0] & 0x3F) {
B
bellard 已提交
1674 1675
        case 0x05:
            /* WRITE variants */
1676 1677
            FLOPPY_DPRINTF("treat WRITE command (%02x)\n", fdctrl->fifo[0]);
            fdctrl_start_transfer(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1678 1679 1680 1681 1682
            return;
        case 0x09:
            /* WRITE_DELETED variants */
//            FLOPPY_DPRINTF("treat WRITE_DELETED command\n");
            FLOPPY_ERROR("treat WRITE_DELETED command\n");
1683
            fdctrl_start_transfer_del(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1684 1685 1686 1687
            return;
        default:
            break;
        }
1688
        switch (fdctrl->fifo[0]) {
B
bellard 已提交
1689 1690 1691
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("treat SPECIFY command\n");
1692
            fdctrl->timer0 = (fdctrl->fifo[1] >> 4) & 0xF;
B
bellard 已提交
1693
            fdctrl->timer1 = fdctrl->fifo[2] >> 1;
1694
            fdctrl->dma_en = 1 - (fdctrl->fifo[2] & 1) ;
B
bellard 已提交
1695
            /* No result back */
1696
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1697 1698 1699 1700
            break;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("treat SENSE_DRIVE_STATUS command\n");
1701
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1702
            cur_drv = get_cur_drv(fdctrl);
1703
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
B
bellard 已提交
1704
            /* 1 Byte status back */
1705
            fdctrl->fifo[0] = (cur_drv->ro << 6) |
B
bellard 已提交
1706
                (cur_drv->track == 0 ? 0x10 : 0x00) |
1707 1708 1709
                (cur_drv->head << 2) |
                fdctrl->cur_drv |
                0x28;
1710
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1711 1712 1713 1714
            break;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("treat RECALIBRATE command\n");
1715
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1716
            cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1717
            fd_recalibrate(cur_drv);
1718
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1719
            /* Raise Interrupt */
1720
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1721 1722 1723 1724
            break;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("treat SEEK command\n");
1725
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1726 1727
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
1728
            if (fdctrl->fifo[2] <= cur_drv->track)
B
bellard 已提交
1729 1730 1731
                cur_drv->dir = 1;
            else
                cur_drv->dir = 0;
1732
            fdctrl_reset_fifo(fdctrl);
1733 1734
            if (fdctrl->fifo[2] > cur_drv->max_track) {
                fdctrl_raise_irq(fdctrl, 0x60);
B
bellard 已提交
1735
            } else {
1736
                cur_drv->track = fdctrl->fifo[2];
B
bellard 已提交
1737
                /* Raise Interrupt */
1738
                fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1739 1740 1741 1742 1743
            }
            break;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("treat PERPENDICULAR_MODE command\n");
1744 1745
            if (fdctrl->fifo[1] & 0x80)
                cur_drv->perpendicular = fdctrl->fifo[1] & 0x7;
B
bellard 已提交
1746
            /* No result back */
1747
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1748 1749 1750 1751
            break;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("treat CONFIGURE command\n");
1752 1753
            fdctrl->config = fdctrl->fifo[2];
            fdctrl->precomp_trk =  fdctrl->fifo[3];
B
bellard 已提交
1754
            /* No result back */
1755
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1756 1757 1758 1759
            break;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("treat POWERDOWN_MODE command\n");
1760 1761 1762
            fdctrl->pwrd = fdctrl->fifo[1];
            fdctrl->fifo[0] = fdctrl->fifo[1];
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1763 1764 1765 1766 1767
            break;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("treat OPTION command\n");
            /* No result back */
1768
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1769 1770 1771 1772 1773
            break;
        case 0x42:
            /* READ_TRACK */
//            FLOPPY_DPRINTF("treat READ_TRACK command\n");
            FLOPPY_ERROR("treat READ_TRACK command\n");
1774
            fdctrl_start_transfer(fdctrl, FD_DIR_READ);
B
bellard 已提交
1775 1776
            break;
        case 0x4A:
1777
            /* READ_ID */
1778
            FLOPPY_DPRINTF("treat READ_ID command\n");
1779
            /* XXX: should set main status register to busy */
1780
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
1781
            qemu_mod_timer(fdctrl->result_timer,
1782
                           qemu_get_clock(vm_clock) + (ticks_per_sec / 50));
B
bellard 已提交
1783 1784 1785 1786 1787
            break;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("treat RESTORE command\n");
            /* Drives position */
1788 1789
            drv0(fdctrl)->track = fdctrl->fifo[3];
            drv1(fdctrl)->track = fdctrl->fifo[4];
B
bellard 已提交
1790
            /* timers */
1791 1792 1793 1794 1795 1796 1797 1798 1799
            fdctrl->timer0 = fdctrl->fifo[7];
            fdctrl->timer1 = fdctrl->fifo[8];
            cur_drv->last_sect = fdctrl->fifo[9];
            fdctrl->lock = fdctrl->fifo[10] >> 7;
            cur_drv->perpendicular = (fdctrl->fifo[10] >> 2) & 0xF;
            fdctrl->config = fdctrl->fifo[11];
            fdctrl->precomp_trk = fdctrl->fifo[12];
            fdctrl->pwrd = fdctrl->fifo[13];
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1800 1801 1802
            break;
        case 0x4D:
            /* FORMAT_TRACK */
1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813
            FLOPPY_DPRINTF("treat FORMAT_TRACK command\n");
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
            cur_drv = get_cur_drv(fdctrl);
            fdctrl->data_state |= FD_STATE_FORMAT;
            if (fdctrl->fifo[0] & 0x80)
                fdctrl->data_state |= FD_STATE_MULTI;
            else
                fdctrl->data_state &= ~FD_STATE_MULTI;
            fdctrl->data_state &= ~FD_STATE_SEEK;
            cur_drv->bps =
                fdctrl->fifo[2] > 7 ? 16384 : 128 << fdctrl->fifo[2];
1814
#if 0
1815 1816 1817
            cur_drv->last_sect =
                cur_drv->flags & FDISK_DBL_SIDES ? fdctrl->fifo[3] :
                fdctrl->fifo[3] / 2;
1818
#else
1819
            cur_drv->last_sect = fdctrl->fifo[3];
1820
#endif
1821 1822 1823 1824 1825 1826
            /* TODO: implement format using DMA expected by the Bochs BIOS
             * and Linux fdformat (read 3 bytes per sector via DMA and fill
             * the sector with the specified fill byte
             */
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
B
bellard 已提交
1827 1828 1829 1830
            break;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("treat DRIVE_SPECIFICATION_COMMAND command\n");
1831
            if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x80) {
B
bellard 已提交
1832
                /* Command parameters done */
1833 1834 1835 1836 1837
                if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x40) {
                    fdctrl->fifo[0] = fdctrl->fifo[1];
                    fdctrl->fifo[2] = 0;
                    fdctrl->fifo[3] = 0;
                    fdctrl_set_fifo(fdctrl, 4, 1);
B
bellard 已提交
1838
                } else {
1839
                    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1840
                }
1841
            } else if (fdctrl->data_len > 7) {
B
bellard 已提交
1842
                /* ERROR */
1843 1844 1845
                fdctrl->fifo[0] = 0x80 |
                    (cur_drv->head << 2) | fdctrl->cur_drv;
                fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1846 1847 1848 1849 1850
            }
            break;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_OUT command\n");
1851
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1852 1853 1854
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 0;
1855
            if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
1856
                cur_drv->track = cur_drv->max_track - 1;
1857 1858
            } else {
                cur_drv->track += fdctrl->fifo[2];
B
bellard 已提交
1859
            }
1860 1861
            fdctrl_reset_fifo(fdctrl);
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1862 1863 1864 1865 1866
            break;
        case 0xCD:
            /* FORMAT_AND_WRITE */
//                FLOPPY_DPRINTF("treat FORMAT_AND_WRITE command\n");
            FLOPPY_ERROR("treat FORMAT_AND_WRITE command\n");
1867
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1868 1869
            break;
        case 0xCF:
1870
            /* RELATIVE_SEEK_IN */
B
bellard 已提交
1871
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_IN command\n");
1872
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1873 1874 1875
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 1;
1876
            if (fdctrl->fifo[2] > cur_drv->track) {
1877
                cur_drv->track = 0;
1878 1879
            } else {
                cur_drv->track -= fdctrl->fifo[2];
B
bellard 已提交
1880
            }
1881 1882 1883
            fdctrl_reset_fifo(fdctrl);
            /* Raise Interrupt */
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1884 1885 1886 1887
            break;
        }
    }
}
1888 1889 1890 1891

static void fdctrl_result_timer(void *opaque)
{
    fdctrl_t *fdctrl = opaque;
1892
    fdrive_t *cur_drv = get_cur_drv(fdctrl);
1893

1894 1895 1896 1897 1898 1899 1900
    /* Pretend we are spinning.
     * This is needed for Coherent, which uses READ ID to check for
     * sector interleaving.
     */
    if (cur_drv->last_sect != 0) {
        cur_drv->sect = (cur_drv->sect % cur_drv->last_sect) + 1;
    }
1901 1902
    fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
}