提交 4b19ec0c 编写于 作者: B bellard

spelling fixes


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1104 c046a42c-6fe2-441c-8c8c-71466251a162
上级 e3888186
......@@ -309,7 +309,7 @@ static void fd_reset (fdrive_t *drv)
}
/********************************************************/
/* Intel 82078 floppy disk controler emulation */
/* Intel 82078 floppy disk controller emulation */
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq);
static void fdctrl_reset_fifo (fdctrl_t *fdctrl);
......@@ -363,13 +363,13 @@ do { (state) = ((state) & ~FD_STATE_STATE) | (new_state); } while (0)
struct fdctrl_t {
fdctrl_t *fdctrl;
/* Controler's identification */
/* Controller's identification */
uint8_t version;
/* HW */
int irq_lvl;
int dma_chann;
uint32_t io_base;
/* Controler state */
/* Controller state */
QEMUTimer *result_timer;
uint8_t state;
uint8_t dma_en;
......@@ -475,14 +475,14 @@ fdctrl_t *fdctrl_init (int irq_lvl, int dma_chann, int mem_mapped,
// int io_mem;
int i;
FLOPPY_DPRINTF("init controler\n");
FLOPPY_DPRINTF("init controller\n");
fdctrl = qemu_mallocz(sizeof(fdctrl_t));
if (!fdctrl)
return NULL;
fdctrl->result_timer = qemu_new_timer(vm_clock,
fdctrl_result_timer, fdctrl);
fdctrl->version = 0x90; /* Intel 82078 controler */
fdctrl->version = 0x90; /* Intel 82078 controller */
fdctrl->irq_lvl = irq_lvl;
fdctrl->dma_chann = dma_chann;
fdctrl->io_base = io_base;
......@@ -545,14 +545,14 @@ static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status)
fdctrl->int_status = status;
}
/* Reset controler */
/* Reset controller */
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
{
int i;
FLOPPY_DPRINTF("reset controler\n");
FLOPPY_DPRINTF("reset controller\n");
fdctrl_reset_irq(fdctrl);
/* Initialise controler */
/* Initialise controller */
fdctrl->cur_drv = 0;
/* FIFO state */
fdctrl->data_pos = 0;
......@@ -614,7 +614,7 @@ static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
/* Reset mode */
if (fdctrl->state & FD_CTRL_RESET) {
if (!(value & 0x04)) {
FLOPPY_DPRINTF("Floppy controler in RESET state !\n");
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
}
......@@ -636,12 +636,12 @@ static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
/* Reset */
if (!(value & 0x04)) {
if (!(fdctrl->state & FD_CTRL_RESET)) {
FLOPPY_DPRINTF("controler enter RESET state\n");
FLOPPY_DPRINTF("controller enter RESET state\n");
fdctrl->state |= FD_CTRL_RESET;
}
} else {
if (fdctrl->state & FD_CTRL_RESET) {
FLOPPY_DPRINTF("controler out of RESET state\n");
FLOPPY_DPRINTF("controller out of RESET state\n");
fdctrl_reset(fdctrl, 1);
fdctrl->state &= ~(FD_CTRL_RESET | FD_CTRL_SLEEP);
}
......@@ -667,7 +667,7 @@ static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value)
{
/* Reset mode */
if (fdctrl->state & FD_CTRL_RESET) {
FLOPPY_DPRINTF("Floppy controler in RESET state !\n");
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
......@@ -704,7 +704,7 @@ static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value)
{
/* Reset mode */
if (fdctrl->state & FD_CTRL_RESET) {
FLOPPY_DPRINTF("Floppy controler in RESET state !\n");
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
......@@ -811,7 +811,7 @@ static void fdctrl_start_transfer (fdctrl_t *fdctrl, int direction)
kt = fdctrl->fifo[2];
kh = fdctrl->fifo[3];
ks = fdctrl->fifo[4];
FLOPPY_DPRINTF("Start tranfer at %d %d %02x %02x (%d)\n",
FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n",
fdctrl->cur_drv, kh, kt, ks,
_fd_sector(kh, kt, ks, cur_drv->last_sect));
did_seek = 0;
......@@ -881,7 +881,7 @@ static void fdctrl_start_transfer (fdctrl_t *fdctrl, int direction)
(direction == FD_DIR_READ && dma_mode == 1)) {
/* No access is allowed until DMA transfer has completed */
fdctrl->state |= FD_CTRL_BUSY;
/* Now, we just have to wait for the DMA controler to
/* Now, we just have to wait for the DMA controller to
* recall us...
*/
DMA_hold_DREQ(fdctrl->dma_chann);
......@@ -1159,7 +1159,7 @@ static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
cur_drv = get_cur_drv(fdctrl);
/* Reset mode */
if (fdctrl->state & FD_CTRL_RESET) {
FLOPPY_DPRINTF("Floppy controler in RESET state !\n");
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
fdctrl->state &= ~FD_CTRL_SLEEP;
......@@ -1300,7 +1300,7 @@ static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
/* VERSION */
FLOPPY_DPRINTF("VERSION command\n");
/* No parameters cmd */
/* Controler's version */
/* Controller's version */
fdctrl->fifo[0] = fdctrl->version;
fdctrl_set_fifo(fdctrl, 1, 1);
return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册