fdc.c 60.5 KB
Newer Older
B
bellard 已提交
1
/*
2
 * QEMU Floppy disk emulator (Intel 82078)
3
 *
4
 * Copyright (c) 2003, 2007 Jocelyn Mayer
5
 *
B
bellard 已提交
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
B
bellard 已提交
24 25 26 27
/*
 * The controller is used in Sun4m systems in a slightly different
 * way. There are changes in DOR register and DMA is not available.
 */
P
pbrook 已提交
28 29 30 31 32
#include "hw.h"
#include "fdc.h"
#include "block.h"
#include "qemu-timer.h"
#include "isa.h"
B
bellard 已提交
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

/********************************************************/
/* debug Floppy devices */
//#define DEBUG_FLOPPY

#ifdef DEBUG_FLOPPY
#define FLOPPY_DPRINTF(fmt, args...) \
do { printf("FLOPPY: " fmt , ##args); } while (0)
#else
#define FLOPPY_DPRINTF(fmt, args...)
#endif

#define FLOPPY_ERROR(fmt, args...) \
do { printf("FLOPPY ERROR: %s: " fmt, __func__ , ##args); } while (0)

/********************************************************/
/* Floppy drive emulation                               */

/* Will always be a fixed parameter for us */
#define FD_SECTOR_LEN 512
#define FD_SECTOR_SC  2   /* Sector size code */

/* Floppy disk drive emulation */
typedef enum fdisk_type_t {
    FDRIVE_DISK_288   = 0x01, /* 2.88 MB disk           */
    FDRIVE_DISK_144   = 0x02, /* 1.44 MB disk           */
    FDRIVE_DISK_720   = 0x03, /* 720 kB disk            */
60 61
    FDRIVE_DISK_USER  = 0x04, /* User defined geometry  */
    FDRIVE_DISK_NONE  = 0x05, /* No disk                */
B
bellard 已提交
62 63 64 65 66 67 68 69 70
} fdisk_type_t;

typedef enum fdrive_type_t {
    FDRIVE_DRV_144  = 0x00,   /* 1.44 MB 3"5 drive      */
    FDRIVE_DRV_288  = 0x01,   /* 2.88 MB 3"5 drive      */
    FDRIVE_DRV_120  = 0x02,   /* 1.2  MB 5"25 drive     */
    FDRIVE_DRV_NONE = 0x03,   /* No drive connected     */
} fdrive_type_t;

71 72 73 74 75 76 77 78
typedef enum fdrive_flags_t {
    FDRIVE_MOTOR_ON   = 0x01, /* motor on/off           */
} fdrive_flags_t;

typedef enum fdisk_flags_t {
    FDISK_DBL_SIDES  = 0x01,
} fdisk_flags_t;

B
bellard 已提交
79 80 81 82
typedef struct fdrive_t {
    BlockDriverState *bs;
    /* Drive status */
    fdrive_type_t drive;
83
    fdrive_flags_t drflags;
B
bellard 已提交
84 85 86 87 88 89 90 91 92
    uint8_t perpendicular;    /* 2.88 MB access mode    */
    /* Position */
    uint8_t head;
    uint8_t track;
    uint8_t sect;
    /* Last operation status */
    uint8_t dir;              /* Direction              */
    uint8_t rw;               /* Read/write             */
    /* Media */
93
    fdisk_flags_t flags;
B
bellard 已提交
94 95
    uint8_t last_sect;        /* Nb sector per track    */
    uint8_t max_track;        /* Nb of tracks           */
96
    uint16_t bps;             /* Bytes per sector       */
B
bellard 已提交
97 98 99
    uint8_t ro;               /* Is read-only           */
} fdrive_t;

100
static void fd_init (fdrive_t *drv, BlockDriverState *bs)
B
bellard 已提交
101 102
{
    /* Drive */
103
    drv->bs = bs;
B
bellard 已提交
104
    drv->drive = FDRIVE_DRV_NONE;
105
    drv->drflags = 0;
B
bellard 已提交
106 107
    drv->perpendicular = 0;
    /* Disk */
108
    drv->last_sect = 0;
B
bellard 已提交
109 110 111 112
    drv->max_track = 0;
}

static int _fd_sector (uint8_t head, uint8_t track,
113
                       uint8_t sect, uint8_t last_sect)
B
bellard 已提交
114 115 116 117 118 119 120 121 122 123 124 125 126 127
{
    return (((track * 2) + head) * last_sect) + sect - 1;
}

/* Returns current position, in sectors, for given drive */
static int fd_sector (fdrive_t *drv)
{
    return _fd_sector(drv->head, drv->track, drv->sect, drv->last_sect);
}

static int fd_seek (fdrive_t *drv, uint8_t head, uint8_t track, uint8_t sect,
                    int enable_seek)
{
    uint32_t sector;
128 129 130
    int ret;

    if (track > drv->max_track ||
131
        (head != 0 && (drv->flags & FDISK_DBL_SIDES) == 0)) {
132 133 134 135
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
136 137 138
        return 2;
    }
    if (sect > drv->last_sect) {
139 140 141 142
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
143 144 145
        return 3;
    }
    sector = _fd_sector(head, track, sect, drv->last_sect);
146
    ret = 0;
B
bellard 已提交
147 148 149 150 151 152 153 154 155
    if (sector != fd_sector(drv)) {
#if 0
        if (!enable_seek) {
            FLOPPY_ERROR("no implicit seek %d %02x %02x (max=%d %02x %02x)\n",
                         head, track, sect, 1, drv->max_track, drv->last_sect);
            return 4;
        }
#endif
        drv->head = head;
156 157
        if (drv->track != track)
            ret = 1;
B
bellard 已提交
158 159 160 161
        drv->track = track;
        drv->sect = sect;
    }

162
    return ret;
B
bellard 已提交
163 164 165 166 167 168 169 170 171 172 173 174 175
}

/* Set drive back to track 0 */
static void fd_recalibrate (fdrive_t *drv)
{
    FLOPPY_DPRINTF("recalibrate\n");
    drv->head = 0;
    drv->track = 0;
    drv->sect = 1;
    drv->dir = 1;
    drv->rw = 0;
}

176 177 178 179 180 181 182
/* Recognize floppy formats */
typedef struct fd_format_t {
    fdrive_type_t drive;
    fdisk_type_t  disk;
    uint8_t last_sect;
    uint8_t max_track;
    uint8_t max_head;
T
ths 已提交
183
    const char *str;
184 185
} fd_format_t;

B
blueswir1 已提交
186
static const fd_format_t fd_formats[] = {
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
    /* First entry is default format */
    /* 1.44 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 18, 80, 1, "1.44 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 20, 80, 1,  "1.6 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 80, 1, "1.68 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 82, 1, "1.72 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 83, 1, "1.74 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 22, 80, 1, "1.76 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 23, 80, 1, "1.84 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 24, 80, 1, "1.92 MB 3\"1/2", },
    /* 2.88 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 36, 80, 1, "2.88 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 39, 80, 1, "3.12 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 40, 80, 1,  "3.2 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 44, 80, 1, "3.52 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 48, 80, 1, "3.84 MB 3\"1/2", },
    /* 720 kB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 1,  "720 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 80, 1,  "800 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 82, 1,  "820 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 83, 1,  "830 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 13, 80, 1, "1.04 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 14, 80, 1, "1.12 MB 3\"1/2", },
    /* 1.2 MB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 15, 80, 1,  "1.2 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 80, 1, "1.44 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 82, 1, "1.48 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 83, 1, "1.49 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 20, 80, 1,  "1.6 MB 5\"1/4", },
    /* 720 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 80, 1,  "720 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 11, 80, 1,  "880 kB 5\"1/4", },
    /* 360 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 1,  "360 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 0,  "180 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 41, 1,  "410 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 42, 1,  "420 kB 5\"1/4", },
224
    /* 320 kB 5"1/4 floppy disks */
225 226 227 228 229 230 231 232
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 1,  "320 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 0,  "160 kB 5\"1/4", },
    /* 360 kB must match 5"1/4 better than 3"1/2... */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 0,  "360 kB 3\"1/2", },
    /* end */
    { FDRIVE_DRV_NONE, FDRIVE_DISK_NONE, -1, -1, 0, NULL, },
};

B
bellard 已提交
233
/* Revalidate a disk drive after a disk change */
234
static void fd_revalidate (fdrive_t *drv)
B
bellard 已提交
235
{
B
blueswir1 已提交
236
    const fd_format_t *parse;
237
    uint64_t nb_sectors, size;
238
    int i, first_match, match;
239
    int nb_heads, max_track, last_sect, ro;
B
bellard 已提交
240 241

    FLOPPY_DPRINTF("revalidate\n");
242
    if (drv->bs != NULL && bdrv_is_inserted(drv->bs)) {
243 244 245 246
        ro = bdrv_is_read_only(drv->bs);
        bdrv_get_geometry_hint(drv->bs, &nb_heads, &max_track, &last_sect);
        if (nb_heads != 0 && max_track != 0 && last_sect != 0) {
            FLOPPY_DPRINTF("User defined disk (%d %d %d)",
247
                           nb_heads - 1, max_track, last_sect);
248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279
        } else {
            bdrv_get_geometry(drv->bs, &nb_sectors);
            match = -1;
            first_match = -1;
            for (i = 0;; i++) {
                parse = &fd_formats[i];
                if (parse->drive == FDRIVE_DRV_NONE)
                    break;
                if (drv->drive == parse->drive ||
                    drv->drive == FDRIVE_DRV_NONE) {
                    size = (parse->max_head + 1) * parse->max_track *
                        parse->last_sect;
                    if (nb_sectors == size) {
                        match = i;
                        break;
                    }
                    if (first_match == -1)
                        first_match = i;
                }
            }
            if (match == -1) {
                if (first_match == -1)
                    match = 1;
                else
                    match = first_match;
                parse = &fd_formats[match];
            }
            nb_heads = parse->max_head + 1;
            max_track = parse->max_track;
            last_sect = parse->last_sect;
            drv->drive = parse->drive;
            FLOPPY_DPRINTF("%s floppy disk (%d h %d t %d s) %s\n", parse->str,
280
                           nb_heads, max_track, last_sect, ro ? "ro" : "rw");
281 282 283 284 285 286 287 288 289
        }
        if (nb_heads == 1) {
            drv->flags &= ~FDISK_DBL_SIDES;
        } else {
            drv->flags |= FDISK_DBL_SIDES;
        }
        drv->max_track = max_track;
        drv->last_sect = last_sect;
        drv->ro = ro;
B
bellard 已提交
290
    } else {
291
        FLOPPY_DPRINTF("No disk in drive\n");
292
        drv->last_sect = 0;
293 294
        drv->max_track = 0;
        drv->flags &= ~FDISK_DBL_SIDES;
B
bellard 已提交
295
    }
296 297
}

B
bellard 已提交
298 299 300
/* Motor control */
static void fd_start (fdrive_t *drv)
{
301
    drv->drflags |= FDRIVE_MOTOR_ON;
B
bellard 已提交
302 303 304 305
}

static void fd_stop (fdrive_t *drv)
{
306
    drv->drflags &= ~FDRIVE_MOTOR_ON;
B
bellard 已提交
307 308 309 310 311 312 313 314 315 316
}

/* Re-initialise a drives (motor off, repositioned) */
static void fd_reset (fdrive_t *drv)
{
    fd_stop(drv);
    fd_recalibrate(drv);
}

/********************************************************/
B
bellard 已提交
317
/* Intel 82078 floppy disk controller emulation          */
B
bellard 已提交
318

319 320
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq);
static void fdctrl_reset_fifo (fdctrl_t *fdctrl);
B
bellard 已提交
321 322
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len);
323
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status);
324
static void fdctrl_result_timer(void *opaque);
325 326 327 328 329 330 331 332 333 334 335

static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl);
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl);
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl);
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl);
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl);
static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl);
B
bellard 已提交
336 337

enum {
338
    FD_CTRL_ACTIVE = 0x01, /* XXX: suppress that */
B
bellard 已提交
339
    FD_CTRL_RESET  = 0x02,
340 341
    FD_CTRL_SLEEP  = 0x04, /* XXX: suppress that */
    FD_CTRL_BUSY   = 0x08, /* dma transfer in progress */
B
bellard 已提交
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359
    FD_CTRL_INTR   = 0x10,
};

enum {
    FD_DIR_WRITE   = 0,
    FD_DIR_READ    = 1,
    FD_DIR_SCANE   = 2,
    FD_DIR_SCANL   = 3,
    FD_DIR_SCANH   = 4,
};

enum {
    FD_STATE_CMD    = 0x00,
    FD_STATE_STATUS = 0x01,
    FD_STATE_DATA   = 0x02,
    FD_STATE_STATE  = 0x03,
    FD_STATE_MULTI  = 0x10,
    FD_STATE_SEEK   = 0x20,
360
    FD_STATE_FORMAT = 0x40,
B
bellard 已提交
361 362 363
};

#define FD_STATE(state) ((state) & FD_STATE_STATE)
364 365
#define FD_SET_STATE(state, new_state) \
do { (state) = ((state) & ~FD_STATE_STATE) | (new_state); } while (0)
B
bellard 已提交
366 367
#define FD_MULTI_TRACK(state) ((state) & FD_STATE_MULTI)
#define FD_DID_SEEK(state) ((state) & FD_STATE_SEEK)
368
#define FD_FORMAT_CMD(state) ((state) & FD_STATE_FORMAT)
B
bellard 已提交
369

370 371
struct fdctrl_t {
    fdctrl_t *fdctrl;
B
bellard 已提交
372
    /* Controller's identification */
B
bellard 已提交
373 374
    uint8_t version;
    /* HW */
P
pbrook 已提交
375
    qemu_irq irq;
B
bellard 已提交
376
    int dma_chann;
377
    target_phys_addr_t io_base;
B
bellard 已提交
378
    /* Controller state */
379
    QEMUTimer *result_timer;
B
bellard 已提交
380 381 382 383 384
    uint8_t state;
    uint8_t dma_en;
    uint8_t cur_drv;
    uint8_t bootsel;
    /* Command FIFO */
385
    uint8_t *fifo;
B
bellard 已提交
386 387 388 389 390
    uint32_t data_pos;
    uint32_t data_len;
    uint8_t data_state;
    uint8_t data_dir;
    uint8_t int_status;
391
    uint8_t eot; /* last wanted sector */
B
bellard 已提交
392 393 394 395 396 397 398 399 400 401
    /* States kept only to be returned back */
    /* Timers state */
    uint8_t timer0;
    uint8_t timer1;
    /* precompensation */
    uint8_t precomp_trk;
    uint8_t config;
    uint8_t lock;
    /* Power down config (also with status regB access mode */
    uint8_t pwrd;
B
blueswir1 已提交
402
    /* Sun4m quirks? */
B
blueswir1 已提交
403
    int sun4m;
B
bellard 已提交
404 405
    /* Floppy drives */
    fdrive_t drives[2];
406 407 408 409 410 411 412
};

static uint32_t fdctrl_read (void *opaque, uint32_t reg)
{
    fdctrl_t *fdctrl = opaque;
    uint32_t retval;

413
    switch (reg & 0x07) {
B
bellard 已提交
414
    case 0x00:
B
blueswir1 已提交
415
        if (fdctrl->sun4m) {
B
blueswir1 已提交
416 417 418 419 420
            // Identify to Linux as S82078B
            retval = fdctrl_read_statusB(fdctrl);
        } else {
            retval = (uint32_t)(-1);
        }
421
        break;
422
    case 0x01:
423 424
        retval = fdctrl_read_statusB(fdctrl);
        break;
425
    case 0x02:
426 427
        retval = fdctrl_read_dor(fdctrl);
        break;
428
    case 0x03:
429
        retval = fdctrl_read_tape(fdctrl);
430
        break;
431
    case 0x04:
432
        retval = fdctrl_read_main_status(fdctrl);
433
        break;
434
    case 0x05:
435
        retval = fdctrl_read_data(fdctrl);
436
        break;
437
    case 0x07:
438
        retval = fdctrl_read_dir(fdctrl);
439
        break;
440
    default:
441 442
        retval = (uint32_t)(-1);
        break;
443
    }
444
    FLOPPY_DPRINTF("read reg%d: 0x%02x\n", reg & 7, retval);
445 446 447 448 449 450 451 452

    return retval;
}

static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value)
{
    fdctrl_t *fdctrl = opaque;

453 454
    FLOPPY_DPRINTF("write reg%d: 0x%02x\n", reg & 7, value);

455 456
    switch (reg & 0x07) {
    case 0x02:
457 458
        fdctrl_write_dor(fdctrl, value);
        break;
459
    case 0x03:
460
        fdctrl_write_tape(fdctrl, value);
461
        break;
462
    case 0x04:
463
        fdctrl_write_rate(fdctrl, value);
464
        break;
465
    case 0x05:
466
        fdctrl_write_data(fdctrl, value);
467
        break;
468
    default:
469
        break;
470
    }
471 472
}

B
bellard 已提交
473 474
static uint32_t fdctrl_read_mem (void *opaque, target_phys_addr_t reg)
{
475
    return fdctrl_read(opaque, (uint32_t)reg);
B
bellard 已提交
476 477
}

478
static void fdctrl_write_mem (void *opaque,
B
bellard 已提交
479 480
                              target_phys_addr_t reg, uint32_t value)
{
481
    fdctrl_write(opaque, (uint32_t)reg, value);
B
bellard 已提交
482 483
}

B
bellard 已提交
484
static CPUReadMemoryFunc *fdctrl_mem_read[3] = {
B
bellard 已提交
485 486 487
    fdctrl_read_mem,
    fdctrl_read_mem,
    fdctrl_read_mem,
B
bellard 已提交
488 489 490
};

static CPUWriteMemoryFunc *fdctrl_mem_write[3] = {
B
bellard 已提交
491 492 493
    fdctrl_write_mem,
    fdctrl_write_mem,
    fdctrl_write_mem,
B
bellard 已提交
494 495
};

496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588
static void fd_save (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    tmp = fd->drflags;
    qemu_put_8s(f, &tmp);
    qemu_put_8s(f, &fd->head);
    qemu_put_8s(f, &fd->track);
    qemu_put_8s(f, &fd->sect);
    qemu_put_8s(f, &fd->dir);
    qemu_put_8s(f, &fd->rw);
}

static void fdc_save (QEMUFile *f, void *opaque)
{
    fdctrl_t *s = opaque;

    qemu_put_8s(f, &s->state);
    qemu_put_8s(f, &s->dma_en);
    qemu_put_8s(f, &s->cur_drv);
    qemu_put_8s(f, &s->bootsel);
    qemu_put_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_put_be32s(f, &s->data_pos);
    qemu_put_be32s(f, &s->data_len);
    qemu_put_8s(f, &s->data_state);
    qemu_put_8s(f, &s->data_dir);
    qemu_put_8s(f, &s->int_status);
    qemu_put_8s(f, &s->eot);
    qemu_put_8s(f, &s->timer0);
    qemu_put_8s(f, &s->timer1);
    qemu_put_8s(f, &s->precomp_trk);
    qemu_put_8s(f, &s->config);
    qemu_put_8s(f, &s->lock);
    qemu_put_8s(f, &s->pwrd);
    fd_save(f, &s->drives[0]);
    fd_save(f, &s->drives[1]);
}

static int fd_load (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    qemu_get_8s(f, &tmp);
    fd->drflags = tmp;
    qemu_get_8s(f, &fd->head);
    qemu_get_8s(f, &fd->track);
    qemu_get_8s(f, &fd->sect);
    qemu_get_8s(f, &fd->dir);
    qemu_get_8s(f, &fd->rw);

    return 0;
}

static int fdc_load (QEMUFile *f, void *opaque, int version_id)
{
    fdctrl_t *s = opaque;
    int ret;

    if (version_id != 1)
        return -EINVAL;

    qemu_get_8s(f, &s->state);
    qemu_get_8s(f, &s->dma_en);
    qemu_get_8s(f, &s->cur_drv);
    qemu_get_8s(f, &s->bootsel);
    qemu_get_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_get_be32s(f, &s->data_pos);
    qemu_get_be32s(f, &s->data_len);
    qemu_get_8s(f, &s->data_state);
    qemu_get_8s(f, &s->data_dir);
    qemu_get_8s(f, &s->int_status);
    qemu_get_8s(f, &s->eot);
    qemu_get_8s(f, &s->timer0);
    qemu_get_8s(f, &s->timer1);
    qemu_get_8s(f, &s->precomp_trk);
    qemu_get_8s(f, &s->config);
    qemu_get_8s(f, &s->lock);
    qemu_get_8s(f, &s->pwrd);

    ret = fd_load(f, &s->drives[0]);
    if (ret == 0)
        ret = fd_load(f, &s->drives[1]);

    return ret;
}

static void fdctrl_external_reset(void *opaque)
{
    fdctrl_t *s = opaque;

    fdctrl_reset(s, 0);
}

589
fdctrl_t *fdctrl_init (qemu_irq irq, int dma_chann, int mem_mapped,
590
                       target_phys_addr_t io_base,
591
                       BlockDriverState **fds)
B
bellard 已提交
592
{
593
    fdctrl_t *fdctrl;
B
bellard 已提交
594
    int io_mem;
B
bellard 已提交
595 596
    int i;

B
bellard 已提交
597
    FLOPPY_DPRINTF("init controller\n");
598 599 600
    fdctrl = qemu_mallocz(sizeof(fdctrl_t));
    if (!fdctrl)
        return NULL;
601 602 603 604 605
    fdctrl->fifo = qemu_memalign(512, FD_SECTOR_LEN);
    if (fdctrl->fifo == NULL) {
        qemu_free(fdctrl);
        return NULL;
    }
606
    fdctrl->result_timer = qemu_new_timer(vm_clock,
607 608
                                          fdctrl_result_timer, fdctrl);

B
bellard 已提交
609
    fdctrl->version = 0x90; /* Intel 82078 controller */
P
pbrook 已提交
610
    fdctrl->irq = irq;
611 612
    fdctrl->dma_chann = dma_chann;
    fdctrl->io_base = io_base;
613
    fdctrl->config = 0x60; /* Implicit seek, polling & FIFO enabled */
B
blueswir1 已提交
614
    fdctrl->sun4m = 0;
615 616 617
    if (fdctrl->dma_chann != -1) {
        fdctrl->dma_en = 1;
        DMA_register_channel(dma_chann, &fdctrl_transfer_handler, fdctrl);
B
bellard 已提交
618
    } else {
619
        fdctrl->dma_en = 0;
B
bellard 已提交
620
    }
621 622
    for (i = 0; i < 2; i++) {
        fd_init(&fdctrl->drives[i], fds[i]);
623
    }
624 625
    fdctrl_reset(fdctrl, 0);
    fdctrl->state = FD_CTRL_ACTIVE;
B
bellard 已提交
626
    if (mem_mapped) {
627 628
        io_mem = cpu_register_io_memory(0, fdctrl_mem_read, fdctrl_mem_write,
                                        fdctrl);
B
bellard 已提交
629
        cpu_register_physical_memory(io_base, 0x08, io_mem);
B
bellard 已提交
630
    } else {
631 632 633 634 635 636 637 638
        register_ioport_read((uint32_t)io_base + 0x01, 5, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_read((uint32_t)io_base + 0x07, 1, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_write((uint32_t)io_base + 0x01, 5, 1, &fdctrl_write,
                              fdctrl);
        register_ioport_write((uint32_t)io_base + 0x07, 1, 1, &fdctrl_write,
                              fdctrl);
B
bellard 已提交
639
    }
640 641
    register_savevm("fdc", io_base, 1, fdc_save, fdc_load, fdctrl);
    qemu_register_reset(fdctrl_external_reset, fdctrl);
642
    for (i = 0; i < 2; i++) {
643
        fd_revalidate(&fdctrl->drives[i]);
B
bellard 已提交
644
    }
645

646
    return fdctrl;
647
}
B
bellard 已提交
648

B
blueswir1 已提交
649 650 651 652 653 654
fdctrl_t *sun4m_fdctrl_init (qemu_irq irq, target_phys_addr_t io_base,
                             BlockDriverState **fds)
{
    fdctrl_t *fdctrl;

    fdctrl = fdctrl_init(irq, 0, 1, io_base, fds);
B
blueswir1 已提交
655
    fdctrl->sun4m = 1;
B
blueswir1 已提交
656 657 658 659

    return fdctrl;
}

660 661
/* XXX: may change if moved to bdrv */
int fdctrl_get_drive_type(fdctrl_t *fdctrl, int drive_num)
662
{
663
    return fdctrl->drives[drive_num].drive;
B
bellard 已提交
664 665 666
}

/* Change IRQ state */
667
static void fdctrl_reset_irq (fdctrl_t *fdctrl)
B
bellard 已提交
668
{
669
    FLOPPY_DPRINTF("Reset interrupt\n");
P
pbrook 已提交
670
    qemu_set_irq(fdctrl->irq, 0);
671
    fdctrl->state &= ~FD_CTRL_INTR;
B
bellard 已提交
672 673
}

674
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status)
B
bellard 已提交
675
{
B
bellard 已提交
676
    // Sparc mutation
B
blueswir1 已提交
677
    if (fdctrl->sun4m && !fdctrl->dma_en) {
678 679 680
        fdctrl->state &= ~FD_CTRL_BUSY;
        fdctrl->int_status = status;
        return;
B
bellard 已提交
681
    }
682
    if (~(fdctrl->state & FD_CTRL_INTR)) {
P
pbrook 已提交
683
        qemu_set_irq(fdctrl->irq, 1);
684
        fdctrl->state |= FD_CTRL_INTR;
B
bellard 已提交
685 686
    }
    FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", status);
687
    fdctrl->int_status = status;
B
bellard 已提交
688 689
}

B
bellard 已提交
690
/* Reset controller */
691
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
B
bellard 已提交
692 693 694
{
    int i;

B
bellard 已提交
695
    FLOPPY_DPRINTF("reset controller\n");
696
    fdctrl_reset_irq(fdctrl);
B
bellard 已提交
697
    /* Initialise controller */
698
    fdctrl->cur_drv = 0;
B
bellard 已提交
699
    /* FIFO state */
700 701 702 703
    fdctrl->data_pos = 0;
    fdctrl->data_len = 0;
    fdctrl->data_state = FD_STATE_CMD;
    fdctrl->data_dir = FD_DIR_WRITE;
B
bellard 已提交
704
    for (i = 0; i < MAX_FD; i++)
705 706
        fd_reset(&fdctrl->drives[i]);
    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
707
    if (do_irq)
708
        fdctrl_raise_irq(fdctrl, 0xc0);
709 710 711 712 713 714 715 716 717 718 719 720 721 722 723
}

static inline fdrive_t *drv0 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[fdctrl->bootsel];
}

static inline fdrive_t *drv1 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[1 - fdctrl->bootsel];
}

static fdrive_t *get_cur_drv (fdctrl_t *fdctrl)
{
    return fdctrl->cur_drv == 0 ? drv0(fdctrl) : drv1(fdctrl);
B
bellard 已提交
724 725 726
}

/* Status B register : 0x01 (read-only) */
727
static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl)
B
bellard 已提交
728 729 730 731 732 733
{
    FLOPPY_DPRINTF("status register: 0x00\n");
    return 0;
}

/* Digital output register : 0x02 */
734
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl)
B
bellard 已提交
735 736 737 738
{
    uint32_t retval = 0;

    /* Drive motors state indicators */
739
    if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
740
        retval |= 1 << 5;
741
    if (drv1(fdctrl)->drflags & FDRIVE_MOTOR_ON)
742
        retval |= 1 << 4;
B
bellard 已提交
743
    /* DMA enable */
744
    retval |= fdctrl->dma_en << 3;
B
bellard 已提交
745
    /* Reset indicator */
746
    retval |= (fdctrl->state & FD_CTRL_RESET) == 0 ? 0x04 : 0;
B
bellard 已提交
747
    /* Selected drive */
748
    retval |= fdctrl->cur_drv;
B
bellard 已提交
749 750 751 752 753
    FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval);

    return retval;
}

754
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
755 756
{
    /* Reset mode */
757
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
758
        if (!(value & 0x04)) {
B
bellard 已提交
759
            FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
760 761 762 763 764 765
            return;
        }
    }
    FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
    /* Drive motors state indicators */
    if (value & 0x20)
766
        fd_start(drv1(fdctrl));
B
bellard 已提交
767
    else
768
        fd_stop(drv1(fdctrl));
B
bellard 已提交
769
    if (value & 0x10)
770
        fd_start(drv0(fdctrl));
B
bellard 已提交
771
    else
772
        fd_stop(drv0(fdctrl));
B
bellard 已提交
773 774
    /* DMA enable */
#if 0
775 776
    if (fdctrl->dma_chann != -1)
        fdctrl->dma_en = 1 - ((value >> 3) & 1);
B
bellard 已提交
777 778 779
#endif
    /* Reset */
    if (!(value & 0x04)) {
780
        if (!(fdctrl->state & FD_CTRL_RESET)) {
B
bellard 已提交
781
            FLOPPY_DPRINTF("controller enter RESET state\n");
782
            fdctrl->state |= FD_CTRL_RESET;
B
bellard 已提交
783 784
        }
    } else {
785
        if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
786
            FLOPPY_DPRINTF("controller out of RESET state\n");
787
            fdctrl_reset(fdctrl, 1);
788
            fdctrl->state &= ~(FD_CTRL_RESET | FD_CTRL_SLEEP);
B
bellard 已提交
789 790 791
        }
    }
    /* Selected drive */
792
    fdctrl->cur_drv = value & 1;
B
bellard 已提交
793 794 795
}

/* Tape drive register : 0x03 */
796
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl)
B
bellard 已提交
797 798 799 800
{
    uint32_t retval = 0;

    /* Disk boot selection indicator */
801
    retval |= fdctrl->bootsel << 2;
B
bellard 已提交
802 803 804 805 806 807
    /* Tape indicators: never allowed */
    FLOPPY_DPRINTF("tape drive register: 0x%02x\n", retval);

    return retval;
}

808
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
809 810
{
    /* Reset mode */
811
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
812
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
813 814 815 816
        return;
    }
    FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
    /* Disk boot selection indicator */
817
    fdctrl->bootsel = (value >> 2) & 1;
B
bellard 已提交
818 819 820 821
    /* Tape indicators: never allow */
}

/* Main status register : 0x04 (read) */
822
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
B
bellard 已提交
823 824 825
{
    uint32_t retval = 0;

826 827
    fdctrl->state &= ~(FD_CTRL_SLEEP | FD_CTRL_RESET);
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
828 829 830
        /* Data transfer allowed */
        retval |= 0x80;
        /* Data transfer direction indicator */
831
        if (fdctrl->data_dir == FD_DIR_READ)
B
bellard 已提交
832 833 834 835
            retval |= 0x40;
    }
    /* Should handle 0x20 for SPECIFY command */
    /* Command busy indicator */
836 837
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA ||
        FD_STATE(fdctrl->data_state) == FD_STATE_STATUS)
B
bellard 已提交
838 839 840 841 842 843 844
        retval |= 0x10;
    FLOPPY_DPRINTF("main status register: 0x%02x\n", retval);

    return retval;
}

/* Data select rate register : 0x04 (write) */
845
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
846 847
{
    /* Reset mode */
848
    if (fdctrl->state & FD_CTRL_RESET) {
849 850 851
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
        return;
    }
B
bellard 已提交
852 853 854
    FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
    /* Reset: autoclear */
    if (value & 0x80) {
855 856 857
        fdctrl->state |= FD_CTRL_RESET;
        fdctrl_reset(fdctrl, 1);
        fdctrl->state &= ~FD_CTRL_RESET;
B
bellard 已提交
858 859
    }
    if (value & 0x40) {
860 861
        fdctrl->state |= FD_CTRL_SLEEP;
        fdctrl_reset(fdctrl, 1);
B
bellard 已提交
862 863 864 865
    }
//        fdctrl.precomp = (value >> 2) & 0x07;
}

B
bellard 已提交
866 867 868
static int fdctrl_media_changed(fdrive_t *drv)
{
    int ret;
869

870
    if (!drv->bs)
B
bellard 已提交
871 872 873 874 875 876 877 878
        return 0;
    ret = bdrv_media_changed(drv->bs);
    if (ret) {
        fd_revalidate(drv);
    }
    return ret;
}

B
bellard 已提交
879
/* Digital input register : 0x07 (read-only) */
880
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl)
B
bellard 已提交
881 882 883
{
    uint32_t retval = 0;

B
bellard 已提交
884
    if (fdctrl_media_changed(drv0(fdctrl)) ||
885
        fdctrl_media_changed(drv1(fdctrl)))
B
bellard 已提交
886 887
        retval |= 0x80;
    if (retval != 0)
888
        FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
B
bellard 已提交
889 890 891 892 893

    return retval;
}

/* FIFO state control */
894
static void fdctrl_reset_fifo (fdctrl_t *fdctrl)
B
bellard 已提交
895
{
896 897 898
    fdctrl->data_dir = FD_DIR_WRITE;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_CMD);
B
bellard 已提交
899 900 901
}

/* Set FIFO status for the host to read */
902
static void fdctrl_set_fifo (fdctrl_t *fdctrl, int fifo_len, int do_irq)
B
bellard 已提交
903
{
904 905 906 907
    fdctrl->data_dir = FD_DIR_READ;
    fdctrl->data_len = fifo_len;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_STATUS);
B
bellard 已提交
908
    if (do_irq)
909
        fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
910 911 912
}

/* Set an error: unimplemented/unknown command */
913
static void fdctrl_unimplemented (fdctrl_t *fdctrl)
B
bellard 已提交
914 915
{
#if 0
916 917 918
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
919
    fdctrl->fifo[0] = 0x60 | (cur_drv->head << 2) | fdctrl->cur_drv;
920 921 922
    fdctrl->fifo[1] = 0x00;
    fdctrl->fifo[2] = 0x00;
    fdctrl_set_fifo(fdctrl, 3, 1);
B
bellard 已提交
923
#else
924 925 926
    //    fdctrl_reset_fifo(fdctrl);
    fdctrl->fifo[0] = 0x80;
    fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
927 928 929 930
#endif
}

/* Callback for transfer end (stop or abort) */
931
static void fdctrl_stop_transfer (fdctrl_t *fdctrl, uint8_t status0,
932
                                  uint8_t status1, uint8_t status2)
B
bellard 已提交
933
{
934
    fdrive_t *cur_drv;
B
bellard 已提交
935

936
    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
937 938
    FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n",
                   status0, status1, status2,
939 940
                   status0 | (cur_drv->head << 2) | fdctrl->cur_drv);
    fdctrl->fifo[0] = status0 | (cur_drv->head << 2) | fdctrl->cur_drv;
941 942 943 944 945 946 947
    fdctrl->fifo[1] = status1;
    fdctrl->fifo[2] = status2;
    fdctrl->fifo[3] = cur_drv->track;
    fdctrl->fifo[4] = cur_drv->head;
    fdctrl->fifo[5] = cur_drv->sect;
    fdctrl->fifo[6] = FD_SECTOR_SC;
    fdctrl->data_dir = FD_DIR_READ;
948
    if (fdctrl->state & FD_CTRL_BUSY) {
949
        DMA_release_DREQ(fdctrl->dma_chann);
950 951
        fdctrl->state &= ~FD_CTRL_BUSY;
    }
952
    fdctrl_set_fifo(fdctrl, 7, 1);
B
bellard 已提交
953 954 955
}

/* Prepare a data transfer (either DMA or FIFO) */
956
static void fdctrl_start_transfer (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
957
{
958
    fdrive_t *cur_drv;
B
bellard 已提交
959 960 961
    uint8_t kh, kt, ks;
    int did_seek;

962 963 964 965 966
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[2];
    kh = fdctrl->fifo[3];
    ks = fdctrl->fifo[4];
B
bellard 已提交
967
    FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n",
968
                   fdctrl->cur_drv, kh, kt, ks,
B
bellard 已提交
969 970
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
971
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
B
bellard 已提交
972 973
    case 2:
        /* sect too big */
974 975 976 977
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
978 979 980
        return;
    case 3:
        /* track too big */
981 982 983 984
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
985 986 987
        return;
    case 4:
        /* No seek enabled */
988 989 990 991
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
992 993 994 995 996 997 998 999
        return;
    case 1:
        did_seek = 1;
        break;
    default:
        break;
    }
    /* Set the FIFO state */
1000 1001 1002 1003 1004 1005 1006
    fdctrl->data_dir = direction;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_DATA); /* FIFO ready for data */
    if (fdctrl->fifo[0] & 0x80)
        fdctrl->data_state |= FD_STATE_MULTI;
    else
        fdctrl->data_state &= ~FD_STATE_MULTI;
B
bellard 已提交
1007
    if (did_seek)
1008 1009 1010 1011 1012 1013
        fdctrl->data_state |= FD_STATE_SEEK;
    else
        fdctrl->data_state &= ~FD_STATE_SEEK;
    if (fdctrl->fifo[5] == 00) {
        fdctrl->data_len = fdctrl->fifo[8];
    } else {
1014
        int tmp;
T
ths 已提交
1015
        fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]);
1016 1017 1018
        tmp = (cur_drv->last_sect - ks + 1);
        if (fdctrl->fifo[0] & 0x80)
            tmp += cur_drv->last_sect;
1019
        fdctrl->data_len *= tmp;
1020
    }
1021
    fdctrl->eot = fdctrl->fifo[6];
1022
    if (fdctrl->dma_en) {
B
bellard 已提交
1023 1024
        int dma_mode;
        /* DMA transfer are enabled. Check if DMA channel is well programmed */
1025
        dma_mode = DMA_get_channel_mode(fdctrl->dma_chann);
B
bellard 已提交
1026
        dma_mode = (dma_mode >> 2) & 3;
1027
        FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
1028
                       dma_mode, direction,
1029
                       (128 << fdctrl->fifo[5]) *
1030
                       (cur_drv->last_sect - ks + 1), fdctrl->data_len);
B
bellard 已提交
1031 1032 1033 1034 1035
        if (((direction == FD_DIR_SCANE || direction == FD_DIR_SCANL ||
              direction == FD_DIR_SCANH) && dma_mode == 0) ||
            (direction == FD_DIR_WRITE && dma_mode == 2) ||
            (direction == FD_DIR_READ && dma_mode == 1)) {
            /* No access is allowed until DMA transfer has completed */
1036
            fdctrl->state |= FD_CTRL_BUSY;
B
bellard 已提交
1037
            /* Now, we just have to wait for the DMA controller to
B
bellard 已提交
1038 1039
             * recall us...
             */
1040 1041
            DMA_hold_DREQ(fdctrl->dma_chann);
            DMA_schedule(fdctrl->dma_chann);
B
bellard 已提交
1042
            return;
1043
        } else {
1044
            FLOPPY_ERROR("dma_mode=%d direction=%d\n", dma_mode, direction);
B
bellard 已提交
1045 1046 1047 1048
        }
    }
    FLOPPY_DPRINTF("start non-DMA transfer\n");
    /* IO based transfer: calculate len */
1049
    fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
1050 1051 1052 1053 1054

    return;
}

/* Prepare a transfer of deleted data */
1055
static void fdctrl_start_transfer_del (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
1056 1057 1058 1059
{
    /* We don't handle deleted data,
     * so we don't return *ANYTHING*
     */
1060
    fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
B
bellard 已提交
1061 1062 1063
}

/* handlers for DMA transfers */
B
bellard 已提交
1064 1065
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len)
B
bellard 已提交
1066
{
1067 1068 1069
    fdctrl_t *fdctrl;
    fdrive_t *cur_drv;
    int len, start_pos, rel_pos;
B
bellard 已提交
1070 1071
    uint8_t status0 = 0x00, status1 = 0x00, status2 = 0x00;

1072 1073
    fdctrl = opaque;
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
1074 1075 1076
        FLOPPY_DPRINTF("Not in DMA transfer mode !\n");
        return 0;
    }
1077 1078 1079
    cur_drv = get_cur_drv(fdctrl);
    if (fdctrl->data_dir == FD_DIR_SCANE || fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1080
        status2 = 0x04;
B
bellard 已提交
1081 1082
    if (dma_len > fdctrl->data_len)
        dma_len = fdctrl->data_len;
1083
    if (cur_drv->bs == NULL) {
1084 1085 1086 1087 1088
        if (fdctrl->data_dir == FD_DIR_WRITE)
            fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
        else
            fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        len = 0;
1089 1090
        goto transfer_error;
    }
1091
    rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
B
bellard 已提交
1092 1093
    for (start_pos = fdctrl->data_pos; fdctrl->data_pos < dma_len;) {
        len = dma_len - fdctrl->data_pos;
1094 1095
        if (len + rel_pos > FD_SECTOR_LEN)
            len = FD_SECTOR_LEN - rel_pos;
B
bellard 已提交
1096 1097
        FLOPPY_DPRINTF("copy %d bytes (%d %d %d) %d pos %d %02x "
                       "(%d-0x%08x 0x%08x)\n", len, dma_len, fdctrl->data_pos,
1098 1099
                       fdctrl->data_len, fdctrl->cur_drv, cur_drv->head,
                       cur_drv->track, cur_drv->sect, fd_sector(cur_drv),
B
bellard 已提交
1100
                       fd_sector(cur_drv) * 512);
1101
        if (fdctrl->data_dir != FD_DIR_WRITE ||
1102
            len < FD_SECTOR_LEN || rel_pos != 0) {
1103 1104
            /* READ & SCAN commands and realign to a sector for WRITE */
            if (bdrv_read(cur_drv->bs, fd_sector(cur_drv),
1105
                          fdctrl->fifo, 1) < 0) {
B
bellard 已提交
1106 1107 1108
                FLOPPY_DPRINTF("Floppy: error getting sector %d\n",
                               fd_sector(cur_drv));
                /* Sure, image size is too small... */
1109
                memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
B
bellard 已提交
1110
            }
1111
        }
1112 1113 1114
        switch (fdctrl->data_dir) {
        case FD_DIR_READ:
            /* READ commands */
B
bellard 已提交
1115 1116
            DMA_write_memory (nchan, fdctrl->fifo + rel_pos,
                              fdctrl->data_pos, len);
1117 1118
            break;
        case FD_DIR_WRITE:
1119
            /* WRITE commands */
B
bellard 已提交
1120 1121
            DMA_read_memory (nchan, fdctrl->fifo + rel_pos,
                             fdctrl->data_pos, len);
1122
            if (bdrv_write(cur_drv->bs, fd_sector(cur_drv),
1123
                           fdctrl->fifo, 1) < 0) {
1124 1125 1126
                FLOPPY_ERROR("writting sector %d\n", fd_sector(cur_drv));
                fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
                goto transfer_error;
1127
            }
1128 1129 1130
            break;
        default:
            /* SCAN commands */
1131
            {
1132
                uint8_t tmpbuf[FD_SECTOR_LEN];
1133
                int ret;
B
bellard 已提交
1134
                DMA_read_memory (nchan, tmpbuf, fdctrl->data_pos, len);
1135
                ret = memcmp(tmpbuf, fdctrl->fifo + rel_pos, len);
B
bellard 已提交
1136 1137 1138 1139
                if (ret == 0) {
                    status2 = 0x08;
                    goto end_transfer;
                }
1140 1141
                if ((ret < 0 && fdctrl->data_dir == FD_DIR_SCANL) ||
                    (ret > 0 && fdctrl->data_dir == FD_DIR_SCANH)) {
B
bellard 已提交
1142 1143 1144 1145
                    status2 = 0x00;
                    goto end_transfer;
                }
            }
1146
            break;
B
bellard 已提交
1147
        }
1148 1149
        fdctrl->data_pos += len;
        rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
1150
        if (rel_pos == 0) {
B
bellard 已提交
1151
            /* Seek to next sector */
1152 1153 1154 1155
            FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d) (%d)\n",
                           cur_drv->head, cur_drv->track, cur_drv->sect,
                           fd_sector(cur_drv),
                           fdctrl->data_pos - len);
1156 1157 1158 1159
            /* XXX: cur_drv->sect >= cur_drv->last_sect should be an
               error in fact */
            if (cur_drv->sect >= cur_drv->last_sect ||
                cur_drv->sect == fdctrl->eot) {
1160 1161 1162 1163
                cur_drv->sect = 1;
                if (FD_MULTI_TRACK(fdctrl->data_state)) {
                    if (cur_drv->head == 0 &&
                        (cur_drv->flags & FDISK_DBL_SIDES) != 0) {
1164 1165 1166
                        cur_drv->head = 1;
                    } else {
                        cur_drv->head = 0;
1167 1168 1169
                        cur_drv->track++;
                        if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
                            break;
1170 1171 1172 1173
                    }
                } else {
                    cur_drv->track++;
                    break;
B
bellard 已提交
1174
                }
1175 1176 1177
                FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
                               cur_drv->head, cur_drv->track,
                               cur_drv->sect, fd_sector(cur_drv));
1178 1179
            } else {
                cur_drv->sect++;
B
bellard 已提交
1180 1181 1182
            }
        }
    }
1183
 end_transfer:
1184 1185
    len = fdctrl->data_pos - start_pos;
    FLOPPY_DPRINTF("end transfer %d %d %d\n",
1186
                   fdctrl->data_pos, len, fdctrl->data_len);
1187 1188 1189
    if (fdctrl->data_dir == FD_DIR_SCANE ||
        fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1190
        status2 = 0x08;
1191
    if (FD_DID_SEEK(fdctrl->data_state))
B
bellard 已提交
1192
        status0 |= 0x20;
1193 1194
    fdctrl->data_len -= len;
    //    if (fdctrl->data_len == 0)
1195
    fdctrl_stop_transfer(fdctrl, status0, status1, status2);
1196
 transfer_error:
B
bellard 已提交
1197

1198
    return len;
B
bellard 已提交
1199 1200 1201
}

/* Data register : 0x05 */
1202
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl)
B
bellard 已提交
1203
{
1204
    fdrive_t *cur_drv;
B
bellard 已提交
1205 1206 1207
    uint32_t retval = 0;
    int pos, len;

1208 1209 1210
    cur_drv = get_cur_drv(fdctrl);
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_CMD) {
B
bellard 已提交
1211 1212 1213
        FLOPPY_ERROR("can't read data in CMD state\n");
        return 0;
    }
1214 1215
    pos = fdctrl->data_pos;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1216 1217
        pos %= FD_SECTOR_LEN;
        if (pos == 0) {
1218
            len = fdctrl->data_len - fdctrl->data_pos;
B
bellard 已提交
1219 1220
            if (len > FD_SECTOR_LEN)
                len = FD_SECTOR_LEN;
1221
            bdrv_read(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1222 1223
        }
    }
1224 1225 1226
    retval = fdctrl->fifo[pos];
    if (++fdctrl->data_pos == fdctrl->data_len) {
        fdctrl->data_pos = 0;
1227
        /* Switch from transfer mode to status mode
B
bellard 已提交
1228 1229
         * then from status mode to command mode
         */
1230
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
1231
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
1232
        } else {
1233
            fdctrl_reset_fifo(fdctrl);
1234 1235
            fdctrl_reset_irq(fdctrl);
        }
B
bellard 已提交
1236 1237 1238 1239 1240 1241
    }
    FLOPPY_DPRINTF("data register: 0x%02x\n", retval);

    return retval;
}

1242
static void fdctrl_format_sector (fdctrl_t *fdctrl)
B
bellard 已提交
1243
{
1244 1245 1246
    fdrive_t *cur_drv;
    uint8_t kh, kt, ks;
    int did_seek;
B
bellard 已提交
1247

1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[6];
    kh = fdctrl->fifo[7];
    ks = fdctrl->fifo[8];
    FLOPPY_DPRINTF("format sector at %d %d %02x %02x (%d)\n",
                   fdctrl->cur_drv, kh, kt, ks,
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
    case 2:
        /* sect too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 3:
        /* track too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 4:
        /* No seek enabled */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 1:
        did_seek = 1;
        fdctrl->data_state |= FD_STATE_SEEK;
        break;
    default:
        break;
    }
    memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
    if (cur_drv->bs == NULL ||
        bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1) < 0) {
T
ths 已提交
1289
        FLOPPY_ERROR("formatting sector %d\n", fd_sector(cur_drv));
1290 1291
        fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
    } else {
1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303
        if (cur_drv->sect == cur_drv->last_sect) {
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            /* Last sector done */
            if (FD_DID_SEEK(fdctrl->data_state))
                fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
            else
                fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
        } else {
            /* More to do */
            fdctrl->data_pos = 0;
            fdctrl->data_len = 4;
        }
1304 1305 1306 1307 1308 1309 1310 1311
    }
}

static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
{
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1312
    /* Reset mode */
1313
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
1314
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
1315 1316
        return;
    }
1317 1318
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_STATUS) {
B
bellard 已提交
1319 1320 1321 1322
        FLOPPY_ERROR("can't write data in status mode\n");
        return;
    }
    /* Is it write command time ? */
1323
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1324
        /* FIFO data write */
1325 1326 1327
        fdctrl->fifo[fdctrl->data_pos++] = value;
        if (fdctrl->data_pos % FD_SECTOR_LEN == (FD_SECTOR_LEN - 1) ||
            fdctrl->data_pos == fdctrl->data_len) {
1328
            bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1329
        }
1330
        /* Switch from transfer mode to status mode
B
bellard 已提交
1331 1332
         * then from status mode to command mode
         */
1333 1334
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA)
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1335 1336
        return;
    }
1337
    if (fdctrl->data_pos == 0) {
B
bellard 已提交
1338 1339 1340 1341 1342 1343
        /* Command */
        switch (value & 0x5F) {
        case 0x46:
            /* READ variants */
            FLOPPY_DPRINTF("READ command\n");
            /* 8 parameters cmd */
1344
            fdctrl->data_len = 9;
B
bellard 已提交
1345 1346 1347 1348 1349
            goto enqueue;
        case 0x4C:
            /* READ_DELETED variants */
            FLOPPY_DPRINTF("READ_DELETED command\n");
            /* 8 parameters cmd */
1350
            fdctrl->data_len = 9;
B
bellard 已提交
1351 1352 1353 1354 1355
            goto enqueue;
        case 0x50:
            /* SCAN_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_EQUAL command\n");
            /* 8 parameters cmd */
1356
            fdctrl->data_len = 9;
B
bellard 已提交
1357 1358 1359 1360 1361
            goto enqueue;
        case 0x56:
            /* VERIFY variants */
            FLOPPY_DPRINTF("VERIFY command\n");
            /* 8 parameters cmd */
1362
            fdctrl->data_len = 9;
B
bellard 已提交
1363 1364 1365 1366 1367
            goto enqueue;
        case 0x59:
            /* SCAN_LOW_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_LOW_OR_EQUAL command\n");
            /* 8 parameters cmd */
1368
            fdctrl->data_len = 9;
B
bellard 已提交
1369 1370 1371 1372 1373
            goto enqueue;
        case 0x5D:
            /* SCAN_HIGH_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_HIGH_OR_EQUAL command\n");
            /* 8 parameters cmd */
1374
            fdctrl->data_len = 9;
B
bellard 已提交
1375 1376 1377 1378 1379 1380 1381 1382 1383
            goto enqueue;
        default:
            break;
        }
        switch (value & 0x7F) {
        case 0x45:
            /* WRITE variants */
            FLOPPY_DPRINTF("WRITE command\n");
            /* 8 parameters cmd */
1384
            fdctrl->data_len = 9;
B
bellard 已提交
1385 1386 1387 1388 1389
            goto enqueue;
        case 0x49:
            /* WRITE_DELETED variants */
            FLOPPY_DPRINTF("WRITE_DELETED command\n");
            /* 8 parameters cmd */
1390
            fdctrl->data_len = 9;
B
bellard 已提交
1391 1392 1393 1394 1395 1396 1397 1398 1399
            goto enqueue;
        default:
            break;
        }
        switch (value) {
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("SPECIFY command\n");
            /* 1 parameter cmd */
1400
            fdctrl->data_len = 3;
B
bellard 已提交
1401 1402 1403 1404 1405
            goto enqueue;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("SENSE_DRIVE_STATUS command\n");
            /* 1 parameter cmd */
1406
            fdctrl->data_len = 2;
B
bellard 已提交
1407 1408 1409 1410 1411
            goto enqueue;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("RECALIBRATE command\n");
            /* 1 parameter cmd */
1412
            fdctrl->data_len = 2;
B
bellard 已提交
1413 1414 1415 1416
            goto enqueue;
        case 0x08:
            /* SENSE_INTERRUPT_STATUS */
            FLOPPY_DPRINTF("SENSE_INTERRUPT_STATUS command (%02x)\n",
1417
                           fdctrl->int_status);
B
bellard 已提交
1418
            /* No parameters cmd: returns status if no interrupt */
B
bellard 已提交
1419
#if 0
1420 1421
            fdctrl->fifo[0] =
                fdctrl->int_status | (cur_drv->head << 2) | fdctrl->cur_drv;
B
bellard 已提交
1422 1423 1424 1425 1426 1427 1428
#else
            /* XXX: int_status handling is broken for read/write
               commands, so we do this hack. It should be suppressed
               ASAP */
            fdctrl->fifo[0] =
                0x20 | (cur_drv->head << 2) | fdctrl->cur_drv;
#endif
1429 1430
            fdctrl->fifo[1] = cur_drv->track;
            fdctrl_set_fifo(fdctrl, 2, 0);
1431 1432
            fdctrl_reset_irq(fdctrl);
            fdctrl->int_status = 0xC0;
B
bellard 已提交
1433 1434 1435 1436 1437
            return;
        case 0x0E:
            /* DUMPREG */
            FLOPPY_DPRINTF("DUMPREG command\n");
            /* Drives position */
1438 1439 1440 1441
            fdctrl->fifo[0] = drv0(fdctrl)->track;
            fdctrl->fifo[1] = drv1(fdctrl)->track;
            fdctrl->fifo[2] = 0;
            fdctrl->fifo[3] = 0;
B
bellard 已提交
1442
            /* timers */
1443 1444 1445 1446
            fdctrl->fifo[4] = fdctrl->timer0;
            fdctrl->fifo[5] = (fdctrl->timer1 << 1) | fdctrl->dma_en;
            fdctrl->fifo[6] = cur_drv->last_sect;
            fdctrl->fifo[7] = (fdctrl->lock << 7) |
1447
                (cur_drv->perpendicular << 2);
1448 1449 1450
            fdctrl->fifo[8] = fdctrl->config;
            fdctrl->fifo[9] = fdctrl->precomp_trk;
            fdctrl_set_fifo(fdctrl, 10, 0);
B
bellard 已提交
1451 1452 1453 1454 1455
            return;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("SEEK command\n");
            /* 2 parameters cmd */
1456
            fdctrl->data_len = 3;
B
bellard 已提交
1457 1458 1459 1460 1461
            goto enqueue;
        case 0x10:
            /* VERSION */
            FLOPPY_DPRINTF("VERSION command\n");
            /* No parameters cmd */
B
bellard 已提交
1462
            /* Controller's version */
1463 1464
            fdctrl->fifo[0] = fdctrl->version;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1465 1466 1467 1468 1469
            return;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("PERPENDICULAR_MODE command\n");
            /* 1 parameter cmd */
1470
            fdctrl->data_len = 2;
B
bellard 已提交
1471 1472 1473 1474 1475
            goto enqueue;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("CONFIGURE command\n");
            /* 3 parameters cmd */
1476
            fdctrl->data_len = 4;
B
bellard 已提交
1477 1478 1479 1480 1481
            goto enqueue;
        case 0x14:
            /* UNLOCK */
            FLOPPY_DPRINTF("UNLOCK command\n");
            /* No parameters cmd */
1482 1483 1484
            fdctrl->lock = 0;
            fdctrl->fifo[0] = 0;
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1485 1486 1487 1488 1489
            return;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("POWERDOWN_MODE command\n");
            /* 2 parameters cmd */
1490
            fdctrl->data_len = 3;
B
bellard 已提交
1491 1492 1493 1494 1495
            goto enqueue;
        case 0x18:
            /* PART_ID */
            FLOPPY_DPRINTF("PART_ID command\n");
            /* No parameters cmd */
1496 1497
            fdctrl->fifo[0] = 0x41; /* Stepping 1 */
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1498 1499 1500 1501 1502
            return;
        case 0x2C:
            /* SAVE */
            FLOPPY_DPRINTF("SAVE command\n");
            /* No parameters cmd */
1503 1504
            fdctrl->fifo[0] = 0;
            fdctrl->fifo[1] = 0;
B
bellard 已提交
1505
            /* Drives position */
1506 1507 1508 1509
            fdctrl->fifo[2] = drv0(fdctrl)->track;
            fdctrl->fifo[3] = drv1(fdctrl)->track;
            fdctrl->fifo[4] = 0;
            fdctrl->fifo[5] = 0;
B
bellard 已提交
1510
            /* timers */
1511 1512 1513 1514
            fdctrl->fifo[6] = fdctrl->timer0;
            fdctrl->fifo[7] = fdctrl->timer1;
            fdctrl->fifo[8] = cur_drv->last_sect;
            fdctrl->fifo[9] = (fdctrl->lock << 7) |
1515
                (cur_drv->perpendicular << 2);
1516 1517 1518 1519 1520 1521
            fdctrl->fifo[10] = fdctrl->config;
            fdctrl->fifo[11] = fdctrl->precomp_trk;
            fdctrl->fifo[12] = fdctrl->pwrd;
            fdctrl->fifo[13] = 0;
            fdctrl->fifo[14] = 0;
            fdctrl_set_fifo(fdctrl, 15, 1);
B
bellard 已提交
1522 1523 1524 1525 1526
            return;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("OPTION command\n");
            /* 1 parameter cmd */
1527
            fdctrl->data_len = 2;
B
bellard 已提交
1528 1529 1530 1531 1532
            goto enqueue;
        case 0x42:
            /* READ_TRACK */
            FLOPPY_DPRINTF("READ_TRACK command\n");
            /* 8 parameters cmd */
1533
            fdctrl->data_len = 9;
B
bellard 已提交
1534 1535 1536 1537 1538
            goto enqueue;
        case 0x4A:
            /* READ_ID */
            FLOPPY_DPRINTF("READ_ID command\n");
            /* 1 parameter cmd */
1539
            fdctrl->data_len = 2;
B
bellard 已提交
1540 1541 1542 1543 1544
            goto enqueue;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("RESTORE command\n");
            /* 17 parameters cmd */
1545
            fdctrl->data_len = 18;
B
bellard 已提交
1546 1547 1548 1549 1550
            goto enqueue;
        case 0x4D:
            /* FORMAT_TRACK */
            FLOPPY_DPRINTF("FORMAT_TRACK command\n");
            /* 5 parameters cmd */
1551
            fdctrl->data_len = 6;
B
bellard 已提交
1552 1553 1554 1555 1556
            goto enqueue;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("DRIVE_SPECIFICATION_COMMAND command\n");
            /* 5 parameters cmd */
1557
            fdctrl->data_len = 6;
B
bellard 已提交
1558 1559 1560 1561 1562
            goto enqueue;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("RELATIVE_SEEK_OUT command\n");
            /* 2 parameters cmd */
1563
            fdctrl->data_len = 3;
B
bellard 已提交
1564 1565 1566 1567 1568
            goto enqueue;
        case 0x94:
            /* LOCK */
            FLOPPY_DPRINTF("LOCK command\n");
            /* No parameters cmd */
1569 1570 1571
            fdctrl->lock = 1;
            fdctrl->fifo[0] = 0x10;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1572 1573 1574 1575 1576
            return;
        case 0xCD:
            /* FORMAT_AND_WRITE */
            FLOPPY_DPRINTF("FORMAT_AND_WRITE command\n");
            /* 10 parameters cmd */
1577
            fdctrl->data_len = 11;
B
bellard 已提交
1578 1579 1580 1581 1582
            goto enqueue;
        case 0xCF:
            /* RELATIVE_SEEK_IN */
            FLOPPY_DPRINTF("RELATIVE_SEEK_IN command\n");
            /* 2 parameters cmd */
1583
            fdctrl->data_len = 3;
B
bellard 已提交
1584 1585 1586 1587
            goto enqueue;
        default:
            /* Unknown command */
            FLOPPY_ERROR("unknown command: 0x%02x\n", value);
1588
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1589 1590 1591
            return;
        }
    }
1592
 enqueue:
1593 1594 1595
    FLOPPY_DPRINTF("%s: %02x\n", __func__, value);
    fdctrl->fifo[fdctrl->data_pos] = value;
    if (++fdctrl->data_pos == fdctrl->data_len) {
B
bellard 已提交
1596 1597 1598
        /* We now have all parameters
         * and will be able to treat the command
         */
1599 1600
        if (fdctrl->data_state & FD_STATE_FORMAT) {
            fdctrl_format_sector(fdctrl);
B
bellard 已提交
1601 1602
            return;
        }
1603 1604 1605 1606 1607 1608 1609 1610
        switch (fdctrl->fifo[0] & 0x1F) {
        case 0x06:
            {
                /* READ variants */
                FLOPPY_DPRINTF("treat READ command\n");
                fdctrl_start_transfer(fdctrl, FD_DIR_READ);
                return;
            }
B
bellard 已提交
1611 1612 1613 1614
        case 0x0C:
            /* READ_DELETED variants */
//            FLOPPY_DPRINTF("treat READ_DELETED command\n");
            FLOPPY_ERROR("treat READ_DELETED command\n");
1615
            fdctrl_start_transfer_del(fdctrl, FD_DIR_READ);
B
bellard 已提交
1616 1617 1618 1619 1620
            return;
        case 0x16:
            /* VERIFY variants */
//            FLOPPY_DPRINTF("treat VERIFY command\n");
            FLOPPY_ERROR("treat VERIFY command\n");
1621
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1622 1623 1624 1625 1626
            return;
        case 0x10:
            /* SCAN_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_EQUAL command\n");
1627
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANE);
B
bellard 已提交
1628 1629 1630 1631 1632
            return;
        case 0x19:
            /* SCAN_LOW_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_LOW_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_LOW_OR_EQUAL command\n");
1633
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANL);
B
bellard 已提交
1634 1635 1636 1637 1638
            return;
        case 0x1D:
            /* SCAN_HIGH_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_HIGH_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_HIGH_OR_EQUAL command\n");
1639
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANH);
B
bellard 已提交
1640 1641 1642 1643
            return;
        default:
            break;
        }
1644
        switch (fdctrl->fifo[0] & 0x3F) {
B
bellard 已提交
1645 1646
        case 0x05:
            /* WRITE variants */
1647 1648
            FLOPPY_DPRINTF("treat WRITE command (%02x)\n", fdctrl->fifo[0]);
            fdctrl_start_transfer(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1649 1650 1651 1652 1653
            return;
        case 0x09:
            /* WRITE_DELETED variants */
//            FLOPPY_DPRINTF("treat WRITE_DELETED command\n");
            FLOPPY_ERROR("treat WRITE_DELETED command\n");
1654
            fdctrl_start_transfer_del(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1655 1656 1657 1658
            return;
        default:
            break;
        }
1659
        switch (fdctrl->fifo[0]) {
B
bellard 已提交
1660 1661 1662
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("treat SPECIFY command\n");
1663
            fdctrl->timer0 = (fdctrl->fifo[1] >> 4) & 0xF;
B
bellard 已提交
1664
            fdctrl->timer1 = fdctrl->fifo[2] >> 1;
1665
            fdctrl->dma_en = 1 - (fdctrl->fifo[2] & 1) ;
B
bellard 已提交
1666
            /* No result back */
1667
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1668 1669 1670 1671
            break;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("treat SENSE_DRIVE_STATUS command\n");
1672
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1673
            cur_drv = get_cur_drv(fdctrl);
1674
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
B
bellard 已提交
1675
            /* 1 Byte status back */
1676
            fdctrl->fifo[0] = (cur_drv->ro << 6) |
B
bellard 已提交
1677
                (cur_drv->track == 0 ? 0x10 : 0x00) |
1678 1679 1680
                (cur_drv->head << 2) |
                fdctrl->cur_drv |
                0x28;
1681
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1682 1683 1684 1685
            break;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("treat RECALIBRATE command\n");
1686
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1687
            cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1688
            fd_recalibrate(cur_drv);
1689
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1690
            /* Raise Interrupt */
1691
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1692 1693 1694 1695
            break;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("treat SEEK command\n");
1696
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1697 1698
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
1699
            if (fdctrl->fifo[2] <= cur_drv->track)
B
bellard 已提交
1700 1701 1702
                cur_drv->dir = 1;
            else
                cur_drv->dir = 0;
1703
            fdctrl_reset_fifo(fdctrl);
1704 1705
            if (fdctrl->fifo[2] > cur_drv->max_track) {
                fdctrl_raise_irq(fdctrl, 0x60);
B
bellard 已提交
1706
            } else {
1707
                cur_drv->track = fdctrl->fifo[2];
B
bellard 已提交
1708
                /* Raise Interrupt */
1709
                fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1710 1711 1712 1713 1714
            }
            break;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("treat PERPENDICULAR_MODE command\n");
1715 1716
            if (fdctrl->fifo[1] & 0x80)
                cur_drv->perpendicular = fdctrl->fifo[1] & 0x7;
B
bellard 已提交
1717
            /* No result back */
1718
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1719 1720 1721 1722
            break;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("treat CONFIGURE command\n");
1723 1724
            fdctrl->config = fdctrl->fifo[2];
            fdctrl->precomp_trk =  fdctrl->fifo[3];
B
bellard 已提交
1725
            /* No result back */
1726
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1727 1728 1729 1730
            break;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("treat POWERDOWN_MODE command\n");
1731 1732 1733
            fdctrl->pwrd = fdctrl->fifo[1];
            fdctrl->fifo[0] = fdctrl->fifo[1];
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1734 1735 1736 1737 1738
            break;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("treat OPTION command\n");
            /* No result back */
1739
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1740 1741 1742 1743 1744
            break;
        case 0x42:
            /* READ_TRACK */
//            FLOPPY_DPRINTF("treat READ_TRACK command\n");
            FLOPPY_ERROR("treat READ_TRACK command\n");
1745
            fdctrl_start_transfer(fdctrl, FD_DIR_READ);
B
bellard 已提交
1746 1747
            break;
        case 0x4A:
1748
            /* READ_ID */
1749
            FLOPPY_DPRINTF("treat READ_ID command\n");
1750
            /* XXX: should set main status register to busy */
1751
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
1752
            qemu_mod_timer(fdctrl->result_timer,
1753
                           qemu_get_clock(vm_clock) + (ticks_per_sec / 50));
B
bellard 已提交
1754 1755 1756 1757 1758
            break;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("treat RESTORE command\n");
            /* Drives position */
1759 1760
            drv0(fdctrl)->track = fdctrl->fifo[3];
            drv1(fdctrl)->track = fdctrl->fifo[4];
B
bellard 已提交
1761
            /* timers */
1762 1763 1764 1765 1766 1767 1768 1769 1770
            fdctrl->timer0 = fdctrl->fifo[7];
            fdctrl->timer1 = fdctrl->fifo[8];
            cur_drv->last_sect = fdctrl->fifo[9];
            fdctrl->lock = fdctrl->fifo[10] >> 7;
            cur_drv->perpendicular = (fdctrl->fifo[10] >> 2) & 0xF;
            fdctrl->config = fdctrl->fifo[11];
            fdctrl->precomp_trk = fdctrl->fifo[12];
            fdctrl->pwrd = fdctrl->fifo[13];
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1771 1772 1773
            break;
        case 0x4D:
            /* FORMAT_TRACK */
1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784
            FLOPPY_DPRINTF("treat FORMAT_TRACK command\n");
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
            cur_drv = get_cur_drv(fdctrl);
            fdctrl->data_state |= FD_STATE_FORMAT;
            if (fdctrl->fifo[0] & 0x80)
                fdctrl->data_state |= FD_STATE_MULTI;
            else
                fdctrl->data_state &= ~FD_STATE_MULTI;
            fdctrl->data_state &= ~FD_STATE_SEEK;
            cur_drv->bps =
                fdctrl->fifo[2] > 7 ? 16384 : 128 << fdctrl->fifo[2];
1785
#if 0
1786 1787 1788
            cur_drv->last_sect =
                cur_drv->flags & FDISK_DBL_SIDES ? fdctrl->fifo[3] :
                fdctrl->fifo[3] / 2;
1789
#else
1790
            cur_drv->last_sect = fdctrl->fifo[3];
1791
#endif
1792 1793 1794 1795 1796 1797
            /* TODO: implement format using DMA expected by the Bochs BIOS
             * and Linux fdformat (read 3 bytes per sector via DMA and fill
             * the sector with the specified fill byte
             */
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
B
bellard 已提交
1798 1799 1800 1801
            break;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("treat DRIVE_SPECIFICATION_COMMAND command\n");
1802
            if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x80) {
B
bellard 已提交
1803
                /* Command parameters done */
1804 1805 1806 1807 1808
                if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x40) {
                    fdctrl->fifo[0] = fdctrl->fifo[1];
                    fdctrl->fifo[2] = 0;
                    fdctrl->fifo[3] = 0;
                    fdctrl_set_fifo(fdctrl, 4, 1);
B
bellard 已提交
1809
                } else {
1810
                    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1811
                }
1812
            } else if (fdctrl->data_len > 7) {
B
bellard 已提交
1813
                /* ERROR */
1814 1815 1816
                fdctrl->fifo[0] = 0x80 |
                    (cur_drv->head << 2) | fdctrl->cur_drv;
                fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1817 1818 1819 1820 1821
            }
            break;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_OUT command\n");
1822
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1823 1824 1825
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 0;
1826
            if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
1827
                cur_drv->track = cur_drv->max_track - 1;
1828 1829
            } else {
                cur_drv->track += fdctrl->fifo[2];
B
bellard 已提交
1830
            }
1831 1832
            fdctrl_reset_fifo(fdctrl);
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1833 1834 1835 1836 1837
            break;
        case 0xCD:
            /* FORMAT_AND_WRITE */
//                FLOPPY_DPRINTF("treat FORMAT_AND_WRITE command\n");
            FLOPPY_ERROR("treat FORMAT_AND_WRITE command\n");
1838
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1839 1840
            break;
        case 0xCF:
1841
            /* RELATIVE_SEEK_IN */
B
bellard 已提交
1842
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_IN command\n");
1843
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1844 1845 1846
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 1;
1847
            if (fdctrl->fifo[2] > cur_drv->track) {
1848
                cur_drv->track = 0;
1849 1850
            } else {
                cur_drv->track -= fdctrl->fifo[2];
B
bellard 已提交
1851
            }
1852 1853 1854
            fdctrl_reset_fifo(fdctrl);
            /* Raise Interrupt */
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1855 1856 1857 1858
            break;
        }
    }
}
1859 1860 1861 1862

static void fdctrl_result_timer(void *opaque)
{
    fdctrl_t *fdctrl = opaque;
1863
    fdrive_t *cur_drv = get_cur_drv(fdctrl);
1864

1865 1866 1867 1868 1869 1870 1871
    /* Pretend we are spinning.
     * This is needed for Coherent, which uses READ ID to check for
     * sector interleaving.
     */
    if (cur_drv->last_sect != 0) {
        cur_drv->sect = (cur_drv->sect % cur_drv->last_sect) + 1;
    }
1872 1873
    fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
}