fdc.c 60.4 KB
Newer Older
B
bellard 已提交
1
/*
2
 * QEMU Floppy disk emulator (Intel 82078)
3
 *
4
 * Copyright (c) 2003, 2007 Jocelyn Mayer
5
 *
B
bellard 已提交
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
B
bellard 已提交
24 25 26 27
/*
 * The controller is used in Sun4m systems in a slightly different
 * way. There are changes in DOR register and DMA is not available.
 */
P
pbrook 已提交
28 29 30 31 32
#include "hw.h"
#include "fdc.h"
#include "block.h"
#include "qemu-timer.h"
#include "isa.h"
B
bellard 已提交
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

/********************************************************/
/* debug Floppy devices */
//#define DEBUG_FLOPPY

#ifdef DEBUG_FLOPPY
#define FLOPPY_DPRINTF(fmt, args...) \
do { printf("FLOPPY: " fmt , ##args); } while (0)
#else
#define FLOPPY_DPRINTF(fmt, args...)
#endif

#define FLOPPY_ERROR(fmt, args...) \
do { printf("FLOPPY ERROR: %s: " fmt, __func__ , ##args); } while (0)

/********************************************************/
/* Floppy drive emulation                               */

/* Will always be a fixed parameter for us */
#define FD_SECTOR_LEN 512
#define FD_SECTOR_SC  2   /* Sector size code */

/* Floppy disk drive emulation */
typedef enum fdisk_type_t {
    FDRIVE_DISK_288   = 0x01, /* 2.88 MB disk           */
    FDRIVE_DISK_144   = 0x02, /* 1.44 MB disk           */
    FDRIVE_DISK_720   = 0x03, /* 720 kB disk            */
60 61
    FDRIVE_DISK_USER  = 0x04, /* User defined geometry  */
    FDRIVE_DISK_NONE  = 0x05, /* No disk                */
B
bellard 已提交
62 63 64 65 66 67 68 69 70
} fdisk_type_t;

typedef enum fdrive_type_t {
    FDRIVE_DRV_144  = 0x00,   /* 1.44 MB 3"5 drive      */
    FDRIVE_DRV_288  = 0x01,   /* 2.88 MB 3"5 drive      */
    FDRIVE_DRV_120  = 0x02,   /* 1.2  MB 5"25 drive     */
    FDRIVE_DRV_NONE = 0x03,   /* No drive connected     */
} fdrive_type_t;

71 72 73 74 75 76 77 78
typedef enum fdrive_flags_t {
    FDRIVE_MOTOR_ON   = 0x01, /* motor on/off           */
} fdrive_flags_t;

typedef enum fdisk_flags_t {
    FDISK_DBL_SIDES  = 0x01,
} fdisk_flags_t;

B
bellard 已提交
79 80 81 82
typedef struct fdrive_t {
    BlockDriverState *bs;
    /* Drive status */
    fdrive_type_t drive;
83
    fdrive_flags_t drflags;
B
bellard 已提交
84 85 86 87 88 89 90 91 92
    uint8_t perpendicular;    /* 2.88 MB access mode    */
    /* Position */
    uint8_t head;
    uint8_t track;
    uint8_t sect;
    /* Last operation status */
    uint8_t dir;              /* Direction              */
    uint8_t rw;               /* Read/write             */
    /* Media */
93
    fdisk_flags_t flags;
B
bellard 已提交
94 95
    uint8_t last_sect;        /* Nb sector per track    */
    uint8_t max_track;        /* Nb of tracks           */
96
    uint16_t bps;             /* Bytes per sector       */
B
bellard 已提交
97 98 99
    uint8_t ro;               /* Is read-only           */
} fdrive_t;

100
static void fd_init (fdrive_t *drv, BlockDriverState *bs)
B
bellard 已提交
101 102
{
    /* Drive */
103
    drv->bs = bs;
B
bellard 已提交
104
    drv->drive = FDRIVE_DRV_NONE;
105
    drv->drflags = 0;
B
bellard 已提交
106 107
    drv->perpendicular = 0;
    /* Disk */
108
    drv->last_sect = 0;
B
bellard 已提交
109 110 111 112
    drv->max_track = 0;
}

static int _fd_sector (uint8_t head, uint8_t track,
113
                       uint8_t sect, uint8_t last_sect)
B
bellard 已提交
114 115 116 117 118 119 120 121 122 123 124 125 126 127
{
    return (((track * 2) + head) * last_sect) + sect - 1;
}

/* Returns current position, in sectors, for given drive */
static int fd_sector (fdrive_t *drv)
{
    return _fd_sector(drv->head, drv->track, drv->sect, drv->last_sect);
}

static int fd_seek (fdrive_t *drv, uint8_t head, uint8_t track, uint8_t sect,
                    int enable_seek)
{
    uint32_t sector;
128 129 130
    int ret;

    if (track > drv->max_track ||
131
        (head != 0 && (drv->flags & FDISK_DBL_SIDES) == 0)) {
132 133 134 135
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
136 137 138
        return 2;
    }
    if (sect > drv->last_sect) {
139 140 141 142
        FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
                       head, track, sect, 1,
                       (drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
                       drv->max_track, drv->last_sect);
B
bellard 已提交
143 144 145
        return 3;
    }
    sector = _fd_sector(head, track, sect, drv->last_sect);
146
    ret = 0;
B
bellard 已提交
147 148 149 150 151 152 153 154 155
    if (sector != fd_sector(drv)) {
#if 0
        if (!enable_seek) {
            FLOPPY_ERROR("no implicit seek %d %02x %02x (max=%d %02x %02x)\n",
                         head, track, sect, 1, drv->max_track, drv->last_sect);
            return 4;
        }
#endif
        drv->head = head;
156 157
        if (drv->track != track)
            ret = 1;
B
bellard 已提交
158 159 160 161
        drv->track = track;
        drv->sect = sect;
    }

162
    return ret;
B
bellard 已提交
163 164 165 166 167 168 169 170 171 172 173 174 175
}

/* Set drive back to track 0 */
static void fd_recalibrate (fdrive_t *drv)
{
    FLOPPY_DPRINTF("recalibrate\n");
    drv->head = 0;
    drv->track = 0;
    drv->sect = 1;
    drv->dir = 1;
    drv->rw = 0;
}

176 177 178 179 180 181 182
/* Recognize floppy formats */
typedef struct fd_format_t {
    fdrive_type_t drive;
    fdisk_type_t  disk;
    uint8_t last_sect;
    uint8_t max_track;
    uint8_t max_head;
T
ths 已提交
183
    const char *str;
184 185
} fd_format_t;

B
blueswir1 已提交
186
static const fd_format_t fd_formats[] = {
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
    /* First entry is default format */
    /* 1.44 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 18, 80, 1, "1.44 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 20, 80, 1,  "1.6 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 80, 1, "1.68 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 82, 1, "1.72 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 21, 83, 1, "1.74 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 22, 80, 1, "1.76 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 23, 80, 1, "1.84 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_144, 24, 80, 1, "1.92 MB 3\"1/2", },
    /* 2.88 MB 3"1/2 floppy disks */
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 36, 80, 1, "2.88 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 39, 80, 1, "3.12 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 40, 80, 1,  "3.2 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 44, 80, 1, "3.52 MB 3\"1/2", },
    { FDRIVE_DRV_288, FDRIVE_DISK_288, 48, 80, 1, "3.84 MB 3\"1/2", },
    /* 720 kB 3"1/2 floppy disks */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 1,  "720 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 80, 1,  "800 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 82, 1,  "820 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 10, 83, 1,  "830 kB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 13, 80, 1, "1.04 MB 3\"1/2", },
    { FDRIVE_DRV_144, FDRIVE_DISK_720, 14, 80, 1, "1.12 MB 3\"1/2", },
    /* 1.2 MB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 15, 80, 1,  "1.2 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 80, 1, "1.44 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 82, 1, "1.48 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 18, 83, 1, "1.49 MB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 20, 80, 1,  "1.6 MB 5\"1/4", },
    /* 720 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 80, 1,  "720 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 11, 80, 1,  "880 kB 5\"1/4", },
    /* 360 kB 5"1/4 floppy disks */
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 1,  "360 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  9, 40, 0,  "180 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 41, 1,  "410 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288, 10, 42, 1,  "420 kB 5\"1/4", },
224
    /* 320 kB 5"1/4 floppy disks */
225 226 227 228 229 230 231 232
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 1,  "320 kB 5\"1/4", },
    { FDRIVE_DRV_120, FDRIVE_DISK_288,  8, 40, 0,  "160 kB 5\"1/4", },
    /* 360 kB must match 5"1/4 better than 3"1/2... */
    { FDRIVE_DRV_144, FDRIVE_DISK_720,  9, 80, 0,  "360 kB 3\"1/2", },
    /* end */
    { FDRIVE_DRV_NONE, FDRIVE_DISK_NONE, -1, -1, 0, NULL, },
};

B
bellard 已提交
233
/* Revalidate a disk drive after a disk change */
234
static void fd_revalidate (fdrive_t *drv)
B
bellard 已提交
235
{
B
blueswir1 已提交
236
    const fd_format_t *parse;
237 238
    int64_t nb_sectors, size;
    int i, first_match, match;
239
    int nb_heads, max_track, last_sect, ro;
B
bellard 已提交
240 241

    FLOPPY_DPRINTF("revalidate\n");
242
    if (drv->bs != NULL && bdrv_is_inserted(drv->bs)) {
243 244 245 246
        ro = bdrv_is_read_only(drv->bs);
        bdrv_get_geometry_hint(drv->bs, &nb_heads, &max_track, &last_sect);
        if (nb_heads != 0 && max_track != 0 && last_sect != 0) {
            FLOPPY_DPRINTF("User defined disk (%d %d %d)",
247
                           nb_heads - 1, max_track, last_sect);
248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279
        } else {
            bdrv_get_geometry(drv->bs, &nb_sectors);
            match = -1;
            first_match = -1;
            for (i = 0;; i++) {
                parse = &fd_formats[i];
                if (parse->drive == FDRIVE_DRV_NONE)
                    break;
                if (drv->drive == parse->drive ||
                    drv->drive == FDRIVE_DRV_NONE) {
                    size = (parse->max_head + 1) * parse->max_track *
                        parse->last_sect;
                    if (nb_sectors == size) {
                        match = i;
                        break;
                    }
                    if (first_match == -1)
                        first_match = i;
                }
            }
            if (match == -1) {
                if (first_match == -1)
                    match = 1;
                else
                    match = first_match;
                parse = &fd_formats[match];
            }
            nb_heads = parse->max_head + 1;
            max_track = parse->max_track;
            last_sect = parse->last_sect;
            drv->drive = parse->drive;
            FLOPPY_DPRINTF("%s floppy disk (%d h %d t %d s) %s\n", parse->str,
280
                           nb_heads, max_track, last_sect, ro ? "ro" : "rw");
281 282 283 284 285 286 287 288 289
        }
        if (nb_heads == 1) {
            drv->flags &= ~FDISK_DBL_SIDES;
        } else {
            drv->flags |= FDISK_DBL_SIDES;
        }
        drv->max_track = max_track;
        drv->last_sect = last_sect;
        drv->ro = ro;
B
bellard 已提交
290
    } else {
291
        FLOPPY_DPRINTF("No disk in drive\n");
292
        drv->last_sect = 0;
293 294
        drv->max_track = 0;
        drv->flags &= ~FDISK_DBL_SIDES;
B
bellard 已提交
295
    }
296 297
}

B
bellard 已提交
298 299 300
/* Motor control */
static void fd_start (fdrive_t *drv)
{
301
    drv->drflags |= FDRIVE_MOTOR_ON;
B
bellard 已提交
302 303 304 305
}

static void fd_stop (fdrive_t *drv)
{
306
    drv->drflags &= ~FDRIVE_MOTOR_ON;
B
bellard 已提交
307 308 309 310 311 312 313 314 315 316
}

/* Re-initialise a drives (motor off, repositioned) */
static void fd_reset (fdrive_t *drv)
{
    fd_stop(drv);
    fd_recalibrate(drv);
}

/********************************************************/
B
bellard 已提交
317
/* Intel 82078 floppy disk controller emulation          */
B
bellard 已提交
318

319 320
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq);
static void fdctrl_reset_fifo (fdctrl_t *fdctrl);
B
bellard 已提交
321 322
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len);
323
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status);
324
static void fdctrl_result_timer(void *opaque);
325 326 327 328 329 330 331 332 333 334 335

static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl);
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl);
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl);
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl);
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl);
static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value);
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl);
B
bellard 已提交
336 337

enum {
338
    FD_CTRL_ACTIVE = 0x01, /* XXX: suppress that */
B
bellard 已提交
339
    FD_CTRL_RESET  = 0x02,
340 341
    FD_CTRL_SLEEP  = 0x04, /* XXX: suppress that */
    FD_CTRL_BUSY   = 0x08, /* dma transfer in progress */
B
bellard 已提交
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359
    FD_CTRL_INTR   = 0x10,
};

enum {
    FD_DIR_WRITE   = 0,
    FD_DIR_READ    = 1,
    FD_DIR_SCANE   = 2,
    FD_DIR_SCANL   = 3,
    FD_DIR_SCANH   = 4,
};

enum {
    FD_STATE_CMD    = 0x00,
    FD_STATE_STATUS = 0x01,
    FD_STATE_DATA   = 0x02,
    FD_STATE_STATE  = 0x03,
    FD_STATE_MULTI  = 0x10,
    FD_STATE_SEEK   = 0x20,
360
    FD_STATE_FORMAT = 0x40,
B
bellard 已提交
361 362 363
};

#define FD_STATE(state) ((state) & FD_STATE_STATE)
364 365
#define FD_SET_STATE(state, new_state) \
do { (state) = ((state) & ~FD_STATE_STATE) | (new_state); } while (0)
B
bellard 已提交
366 367
#define FD_MULTI_TRACK(state) ((state) & FD_STATE_MULTI)
#define FD_DID_SEEK(state) ((state) & FD_STATE_SEEK)
368
#define FD_FORMAT_CMD(state) ((state) & FD_STATE_FORMAT)
B
bellard 已提交
369

370 371
struct fdctrl_t {
    fdctrl_t *fdctrl;
B
bellard 已提交
372
    /* Controller's identification */
B
bellard 已提交
373 374
    uint8_t version;
    /* HW */
P
pbrook 已提交
375
    qemu_irq irq;
B
bellard 已提交
376
    int dma_chann;
377
    target_phys_addr_t io_base;
B
bellard 已提交
378
    /* Controller state */
379
    QEMUTimer *result_timer;
B
bellard 已提交
380 381 382 383 384 385 386 387 388 389 390
    uint8_t state;
    uint8_t dma_en;
    uint8_t cur_drv;
    uint8_t bootsel;
    /* Command FIFO */
    uint8_t fifo[FD_SECTOR_LEN];
    uint32_t data_pos;
    uint32_t data_len;
    uint8_t data_state;
    uint8_t data_dir;
    uint8_t int_status;
391
    uint8_t eot; /* last wanted sector */
B
bellard 已提交
392 393 394 395 396 397 398 399 400 401
    /* States kept only to be returned back */
    /* Timers state */
    uint8_t timer0;
    uint8_t timer1;
    /* precompensation */
    uint8_t precomp_trk;
    uint8_t config;
    uint8_t lock;
    /* Power down config (also with status regB access mode */
    uint8_t pwrd;
B
blueswir1 已提交
402
    /* Sun4m quirks? */
B
blueswir1 已提交
403
    int sun4m;
B
bellard 已提交
404 405
    /* Floppy drives */
    fdrive_t drives[2];
406 407 408 409 410 411 412
};

static uint32_t fdctrl_read (void *opaque, uint32_t reg)
{
    fdctrl_t *fdctrl = opaque;
    uint32_t retval;

413
    switch (reg & 0x07) {
B
bellard 已提交
414
    case 0x00:
B
blueswir1 已提交
415
        if (fdctrl->sun4m) {
B
blueswir1 已提交
416 417 418 419 420
            // Identify to Linux as S82078B
            retval = fdctrl_read_statusB(fdctrl);
        } else {
            retval = (uint32_t)(-1);
        }
421
        break;
422
    case 0x01:
423 424
        retval = fdctrl_read_statusB(fdctrl);
        break;
425
    case 0x02:
426 427
        retval = fdctrl_read_dor(fdctrl);
        break;
428
    case 0x03:
429
        retval = fdctrl_read_tape(fdctrl);
430
        break;
431
    case 0x04:
432
        retval = fdctrl_read_main_status(fdctrl);
433
        break;
434
    case 0x05:
435
        retval = fdctrl_read_data(fdctrl);
436
        break;
437
    case 0x07:
438
        retval = fdctrl_read_dir(fdctrl);
439
        break;
440
    default:
441 442
        retval = (uint32_t)(-1);
        break;
443
    }
444
    FLOPPY_DPRINTF("read reg%d: 0x%02x\n", reg & 7, retval);
445 446 447 448 449 450 451 452

    return retval;
}

static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value)
{
    fdctrl_t *fdctrl = opaque;

453 454
    FLOPPY_DPRINTF("write reg%d: 0x%02x\n", reg & 7, value);

455 456
    switch (reg & 0x07) {
    case 0x02:
457 458
        fdctrl_write_dor(fdctrl, value);
        break;
459
    case 0x03:
460
        fdctrl_write_tape(fdctrl, value);
461
        break;
462
    case 0x04:
463
        fdctrl_write_rate(fdctrl, value);
464
        break;
465
    case 0x05:
466
        fdctrl_write_data(fdctrl, value);
467
        break;
468
    default:
469
        break;
470
    }
471 472
}

B
bellard 已提交
473 474
static uint32_t fdctrl_read_mem (void *opaque, target_phys_addr_t reg)
{
475
    return fdctrl_read(opaque, (uint32_t)reg);
B
bellard 已提交
476 477
}

478
static void fdctrl_write_mem (void *opaque,
B
bellard 已提交
479 480
                              target_phys_addr_t reg, uint32_t value)
{
481
    fdctrl_write(opaque, (uint32_t)reg, value);
B
bellard 已提交
482 483
}

B
bellard 已提交
484
static CPUReadMemoryFunc *fdctrl_mem_read[3] = {
B
bellard 已提交
485 486 487
    fdctrl_read_mem,
    fdctrl_read_mem,
    fdctrl_read_mem,
B
bellard 已提交
488 489 490
};

static CPUWriteMemoryFunc *fdctrl_mem_write[3] = {
B
bellard 已提交
491 492 493
    fdctrl_write_mem,
    fdctrl_write_mem,
    fdctrl_write_mem,
B
bellard 已提交
494 495
};

496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588
static void fd_save (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    tmp = fd->drflags;
    qemu_put_8s(f, &tmp);
    qemu_put_8s(f, &fd->head);
    qemu_put_8s(f, &fd->track);
    qemu_put_8s(f, &fd->sect);
    qemu_put_8s(f, &fd->dir);
    qemu_put_8s(f, &fd->rw);
}

static void fdc_save (QEMUFile *f, void *opaque)
{
    fdctrl_t *s = opaque;

    qemu_put_8s(f, &s->state);
    qemu_put_8s(f, &s->dma_en);
    qemu_put_8s(f, &s->cur_drv);
    qemu_put_8s(f, &s->bootsel);
    qemu_put_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_put_be32s(f, &s->data_pos);
    qemu_put_be32s(f, &s->data_len);
    qemu_put_8s(f, &s->data_state);
    qemu_put_8s(f, &s->data_dir);
    qemu_put_8s(f, &s->int_status);
    qemu_put_8s(f, &s->eot);
    qemu_put_8s(f, &s->timer0);
    qemu_put_8s(f, &s->timer1);
    qemu_put_8s(f, &s->precomp_trk);
    qemu_put_8s(f, &s->config);
    qemu_put_8s(f, &s->lock);
    qemu_put_8s(f, &s->pwrd);
    fd_save(f, &s->drives[0]);
    fd_save(f, &s->drives[1]);
}

static int fd_load (QEMUFile *f, fdrive_t *fd)
{
    uint8_t tmp;

    qemu_get_8s(f, &tmp);
    fd->drflags = tmp;
    qemu_get_8s(f, &fd->head);
    qemu_get_8s(f, &fd->track);
    qemu_get_8s(f, &fd->sect);
    qemu_get_8s(f, &fd->dir);
    qemu_get_8s(f, &fd->rw);

    return 0;
}

static int fdc_load (QEMUFile *f, void *opaque, int version_id)
{
    fdctrl_t *s = opaque;
    int ret;

    if (version_id != 1)
        return -EINVAL;

    qemu_get_8s(f, &s->state);
    qemu_get_8s(f, &s->dma_en);
    qemu_get_8s(f, &s->cur_drv);
    qemu_get_8s(f, &s->bootsel);
    qemu_get_buffer(f, s->fifo, FD_SECTOR_LEN);
    qemu_get_be32s(f, &s->data_pos);
    qemu_get_be32s(f, &s->data_len);
    qemu_get_8s(f, &s->data_state);
    qemu_get_8s(f, &s->data_dir);
    qemu_get_8s(f, &s->int_status);
    qemu_get_8s(f, &s->eot);
    qemu_get_8s(f, &s->timer0);
    qemu_get_8s(f, &s->timer1);
    qemu_get_8s(f, &s->precomp_trk);
    qemu_get_8s(f, &s->config);
    qemu_get_8s(f, &s->lock);
    qemu_get_8s(f, &s->pwrd);

    ret = fd_load(f, &s->drives[0]);
    if (ret == 0)
        ret = fd_load(f, &s->drives[1]);

    return ret;
}

static void fdctrl_external_reset(void *opaque)
{
    fdctrl_t *s = opaque;

    fdctrl_reset(s, 0);
}

589
fdctrl_t *fdctrl_init (qemu_irq irq, int dma_chann, int mem_mapped,
590
                       target_phys_addr_t io_base,
591
                       BlockDriverState **fds)
B
bellard 已提交
592
{
593
    fdctrl_t *fdctrl;
B
bellard 已提交
594
    int io_mem;
B
bellard 已提交
595 596
    int i;

B
bellard 已提交
597
    FLOPPY_DPRINTF("init controller\n");
598 599 600
    fdctrl = qemu_mallocz(sizeof(fdctrl_t));
    if (!fdctrl)
        return NULL;
601
    fdctrl->result_timer = qemu_new_timer(vm_clock,
602 603
                                          fdctrl_result_timer, fdctrl);

B
bellard 已提交
604
    fdctrl->version = 0x90; /* Intel 82078 controller */
P
pbrook 已提交
605
    fdctrl->irq = irq;
606 607
    fdctrl->dma_chann = dma_chann;
    fdctrl->io_base = io_base;
608
    fdctrl->config = 0x60; /* Implicit seek, polling & FIFO enabled */
B
blueswir1 已提交
609
    fdctrl->sun4m = 0;
610 611 612
    if (fdctrl->dma_chann != -1) {
        fdctrl->dma_en = 1;
        DMA_register_channel(dma_chann, &fdctrl_transfer_handler, fdctrl);
B
bellard 已提交
613
    } else {
614
        fdctrl->dma_en = 0;
B
bellard 已提交
615
    }
616 617
    for (i = 0; i < 2; i++) {
        fd_init(&fdctrl->drives[i], fds[i]);
618
    }
619 620
    fdctrl_reset(fdctrl, 0);
    fdctrl->state = FD_CTRL_ACTIVE;
B
bellard 已提交
621
    if (mem_mapped) {
622 623
        io_mem = cpu_register_io_memory(0, fdctrl_mem_read, fdctrl_mem_write,
                                        fdctrl);
B
bellard 已提交
624
        cpu_register_physical_memory(io_base, 0x08, io_mem);
B
bellard 已提交
625
    } else {
626 627 628 629 630 631 632 633
        register_ioport_read((uint32_t)io_base + 0x01, 5, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_read((uint32_t)io_base + 0x07, 1, 1, &fdctrl_read,
                             fdctrl);
        register_ioport_write((uint32_t)io_base + 0x01, 5, 1, &fdctrl_write,
                              fdctrl);
        register_ioport_write((uint32_t)io_base + 0x07, 1, 1, &fdctrl_write,
                              fdctrl);
B
bellard 已提交
634
    }
635 636
    register_savevm("fdc", io_base, 1, fdc_save, fdc_load, fdctrl);
    qemu_register_reset(fdctrl_external_reset, fdctrl);
637
    for (i = 0; i < 2; i++) {
638
        fd_revalidate(&fdctrl->drives[i]);
B
bellard 已提交
639
    }
640

641
    return fdctrl;
642
}
B
bellard 已提交
643

B
blueswir1 已提交
644 645 646 647 648 649
fdctrl_t *sun4m_fdctrl_init (qemu_irq irq, target_phys_addr_t io_base,
                             BlockDriverState **fds)
{
    fdctrl_t *fdctrl;

    fdctrl = fdctrl_init(irq, 0, 1, io_base, fds);
B
blueswir1 已提交
650
    fdctrl->sun4m = 1;
B
blueswir1 已提交
651 652 653 654

    return fdctrl;
}

655 656
/* XXX: may change if moved to bdrv */
int fdctrl_get_drive_type(fdctrl_t *fdctrl, int drive_num)
657
{
658
    return fdctrl->drives[drive_num].drive;
B
bellard 已提交
659 660 661
}

/* Change IRQ state */
662
static void fdctrl_reset_irq (fdctrl_t *fdctrl)
B
bellard 已提交
663
{
664
    FLOPPY_DPRINTF("Reset interrupt\n");
P
pbrook 已提交
665
    qemu_set_irq(fdctrl->irq, 0);
666
    fdctrl->state &= ~FD_CTRL_INTR;
B
bellard 已提交
667 668
}

669
static void fdctrl_raise_irq (fdctrl_t *fdctrl, uint8_t status)
B
bellard 已提交
670
{
B
bellard 已提交
671
    // Sparc mutation
B
blueswir1 已提交
672
    if (fdctrl->sun4m && !fdctrl->dma_en) {
673 674 675
        fdctrl->state &= ~FD_CTRL_BUSY;
        fdctrl->int_status = status;
        return;
B
bellard 已提交
676
    }
677
    if (~(fdctrl->state & FD_CTRL_INTR)) {
P
pbrook 已提交
678
        qemu_set_irq(fdctrl->irq, 1);
679
        fdctrl->state |= FD_CTRL_INTR;
B
bellard 已提交
680 681
    }
    FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", status);
682
    fdctrl->int_status = status;
B
bellard 已提交
683 684
}

B
bellard 已提交
685
/* Reset controller */
686
static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
B
bellard 已提交
687 688 689
{
    int i;

B
bellard 已提交
690
    FLOPPY_DPRINTF("reset controller\n");
691
    fdctrl_reset_irq(fdctrl);
B
bellard 已提交
692
    /* Initialise controller */
693
    fdctrl->cur_drv = 0;
B
bellard 已提交
694
    /* FIFO state */
695 696 697 698
    fdctrl->data_pos = 0;
    fdctrl->data_len = 0;
    fdctrl->data_state = FD_STATE_CMD;
    fdctrl->data_dir = FD_DIR_WRITE;
B
bellard 已提交
699
    for (i = 0; i < MAX_FD; i++)
700 701
        fd_reset(&fdctrl->drives[i]);
    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
702
    if (do_irq)
703
        fdctrl_raise_irq(fdctrl, 0xc0);
704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
}

static inline fdrive_t *drv0 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[fdctrl->bootsel];
}

static inline fdrive_t *drv1 (fdctrl_t *fdctrl)
{
    return &fdctrl->drives[1 - fdctrl->bootsel];
}

static fdrive_t *get_cur_drv (fdctrl_t *fdctrl)
{
    return fdctrl->cur_drv == 0 ? drv0(fdctrl) : drv1(fdctrl);
B
bellard 已提交
719 720 721
}

/* Status B register : 0x01 (read-only) */
722
static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl)
B
bellard 已提交
723 724 725 726 727 728
{
    FLOPPY_DPRINTF("status register: 0x00\n");
    return 0;
}

/* Digital output register : 0x02 */
729
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl)
B
bellard 已提交
730 731 732 733
{
    uint32_t retval = 0;

    /* Drive motors state indicators */
734
    if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
735
        retval |= 1 << 5;
736
    if (drv1(fdctrl)->drflags & FDRIVE_MOTOR_ON)
737
        retval |= 1 << 4;
B
bellard 已提交
738
    /* DMA enable */
739
    retval |= fdctrl->dma_en << 3;
B
bellard 已提交
740
    /* Reset indicator */
741
    retval |= (fdctrl->state & FD_CTRL_RESET) == 0 ? 0x04 : 0;
B
bellard 已提交
742
    /* Selected drive */
743
    retval |= fdctrl->cur_drv;
B
bellard 已提交
744 745 746 747 748
    FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval);

    return retval;
}

749
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
750 751
{
    /* Reset mode */
752
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
753
        if (!(value & 0x04)) {
B
bellard 已提交
754
            FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
755 756 757 758 759 760
            return;
        }
    }
    FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
    /* Drive motors state indicators */
    if (value & 0x20)
761
        fd_start(drv1(fdctrl));
B
bellard 已提交
762
    else
763
        fd_stop(drv1(fdctrl));
B
bellard 已提交
764
    if (value & 0x10)
765
        fd_start(drv0(fdctrl));
B
bellard 已提交
766
    else
767
        fd_stop(drv0(fdctrl));
B
bellard 已提交
768 769
    /* DMA enable */
#if 0
770 771
    if (fdctrl->dma_chann != -1)
        fdctrl->dma_en = 1 - ((value >> 3) & 1);
B
bellard 已提交
772 773 774
#endif
    /* Reset */
    if (!(value & 0x04)) {
775
        if (!(fdctrl->state & FD_CTRL_RESET)) {
B
bellard 已提交
776
            FLOPPY_DPRINTF("controller enter RESET state\n");
777
            fdctrl->state |= FD_CTRL_RESET;
B
bellard 已提交
778 779
        }
    } else {
780
        if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
781
            FLOPPY_DPRINTF("controller out of RESET state\n");
782
            fdctrl_reset(fdctrl, 1);
783
            fdctrl->state &= ~(FD_CTRL_RESET | FD_CTRL_SLEEP);
B
bellard 已提交
784 785 786
        }
    }
    /* Selected drive */
787
    fdctrl->cur_drv = value & 1;
B
bellard 已提交
788 789 790
}

/* Tape drive register : 0x03 */
791
static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl)
B
bellard 已提交
792 793 794 795
{
    uint32_t retval = 0;

    /* Disk boot selection indicator */
796
    retval |= fdctrl->bootsel << 2;
B
bellard 已提交
797 798 799 800 801 802
    /* Tape indicators: never allowed */
    FLOPPY_DPRINTF("tape drive register: 0x%02x\n", retval);

    return retval;
}

803
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
804 805
{
    /* Reset mode */
806
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
807
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
808 809 810 811
        return;
    }
    FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
    /* Disk boot selection indicator */
812
    fdctrl->bootsel = (value >> 2) & 1;
B
bellard 已提交
813 814 815 816
    /* Tape indicators: never allow */
}

/* Main status register : 0x04 (read) */
817
static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
B
bellard 已提交
818 819 820
{
    uint32_t retval = 0;

821 822
    fdctrl->state &= ~(FD_CTRL_SLEEP | FD_CTRL_RESET);
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
823 824 825
        /* Data transfer allowed */
        retval |= 0x80;
        /* Data transfer direction indicator */
826
        if (fdctrl->data_dir == FD_DIR_READ)
B
bellard 已提交
827 828 829 830
            retval |= 0x40;
    }
    /* Should handle 0x20 for SPECIFY command */
    /* Command busy indicator */
831 832
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA ||
        FD_STATE(fdctrl->data_state) == FD_STATE_STATUS)
B
bellard 已提交
833 834 835 836 837 838 839
        retval |= 0x10;
    FLOPPY_DPRINTF("main status register: 0x%02x\n", retval);

    return retval;
}

/* Data select rate register : 0x04 (write) */
840
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value)
B
bellard 已提交
841 842
{
    /* Reset mode */
843
    if (fdctrl->state & FD_CTRL_RESET) {
844 845 846
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
        return;
    }
B
bellard 已提交
847 848 849
    FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
    /* Reset: autoclear */
    if (value & 0x80) {
850 851 852
        fdctrl->state |= FD_CTRL_RESET;
        fdctrl_reset(fdctrl, 1);
        fdctrl->state &= ~FD_CTRL_RESET;
B
bellard 已提交
853 854
    }
    if (value & 0x40) {
855 856
        fdctrl->state |= FD_CTRL_SLEEP;
        fdctrl_reset(fdctrl, 1);
B
bellard 已提交
857 858 859 860
    }
//        fdctrl.precomp = (value >> 2) & 0x07;
}

B
bellard 已提交
861 862 863
static int fdctrl_media_changed(fdrive_t *drv)
{
    int ret;
864

865
    if (!drv->bs)
B
bellard 已提交
866 867 868 869 870 871 872 873
        return 0;
    ret = bdrv_media_changed(drv->bs);
    if (ret) {
        fd_revalidate(drv);
    }
    return ret;
}

B
bellard 已提交
874
/* Digital input register : 0x07 (read-only) */
875
static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl)
B
bellard 已提交
876 877 878
{
    uint32_t retval = 0;

B
bellard 已提交
879
    if (fdctrl_media_changed(drv0(fdctrl)) ||
880
        fdctrl_media_changed(drv1(fdctrl)))
B
bellard 已提交
881 882
        retval |= 0x80;
    if (retval != 0)
883
        FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
B
bellard 已提交
884 885 886 887 888

    return retval;
}

/* FIFO state control */
889
static void fdctrl_reset_fifo (fdctrl_t *fdctrl)
B
bellard 已提交
890
{
891 892 893
    fdctrl->data_dir = FD_DIR_WRITE;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_CMD);
B
bellard 已提交
894 895 896
}

/* Set FIFO status for the host to read */
897
static void fdctrl_set_fifo (fdctrl_t *fdctrl, int fifo_len, int do_irq)
B
bellard 已提交
898
{
899 900 901 902
    fdctrl->data_dir = FD_DIR_READ;
    fdctrl->data_len = fifo_len;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_STATUS);
B
bellard 已提交
903
    if (do_irq)
904
        fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
905 906 907
}

/* Set an error: unimplemented/unknown command */
908
static void fdctrl_unimplemented (fdctrl_t *fdctrl)
B
bellard 已提交
909 910
{
#if 0
911 912 913
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
914
    fdctrl->fifo[0] = 0x60 | (cur_drv->head << 2) | fdctrl->cur_drv;
915 916 917
    fdctrl->fifo[1] = 0x00;
    fdctrl->fifo[2] = 0x00;
    fdctrl_set_fifo(fdctrl, 3, 1);
B
bellard 已提交
918
#else
919 920 921
    //    fdctrl_reset_fifo(fdctrl);
    fdctrl->fifo[0] = 0x80;
    fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
922 923 924 925
#endif
}

/* Callback for transfer end (stop or abort) */
926
static void fdctrl_stop_transfer (fdctrl_t *fdctrl, uint8_t status0,
927
                                  uint8_t status1, uint8_t status2)
B
bellard 已提交
928
{
929
    fdrive_t *cur_drv;
B
bellard 已提交
930

931
    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
932 933
    FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n",
                   status0, status1, status2,
934 935
                   status0 | (cur_drv->head << 2) | fdctrl->cur_drv);
    fdctrl->fifo[0] = status0 | (cur_drv->head << 2) | fdctrl->cur_drv;
936 937 938 939 940 941 942
    fdctrl->fifo[1] = status1;
    fdctrl->fifo[2] = status2;
    fdctrl->fifo[3] = cur_drv->track;
    fdctrl->fifo[4] = cur_drv->head;
    fdctrl->fifo[5] = cur_drv->sect;
    fdctrl->fifo[6] = FD_SECTOR_SC;
    fdctrl->data_dir = FD_DIR_READ;
943
    if (fdctrl->state & FD_CTRL_BUSY) {
944
        DMA_release_DREQ(fdctrl->dma_chann);
945 946
        fdctrl->state &= ~FD_CTRL_BUSY;
    }
947
    fdctrl_set_fifo(fdctrl, 7, 1);
B
bellard 已提交
948 949 950
}

/* Prepare a data transfer (either DMA or FIFO) */
951
static void fdctrl_start_transfer (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
952
{
953
    fdrive_t *cur_drv;
B
bellard 已提交
954 955 956
    uint8_t kh, kt, ks;
    int did_seek;

957 958 959 960 961
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[2];
    kh = fdctrl->fifo[3];
    ks = fdctrl->fifo[4];
B
bellard 已提交
962
    FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n",
963
                   fdctrl->cur_drv, kh, kt, ks,
B
bellard 已提交
964 965
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
966
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
B
bellard 已提交
967 968
    case 2:
        /* sect too big */
969 970 971 972
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
973 974 975
        return;
    case 3:
        /* track too big */
976 977 978 979
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
980 981 982
        return;
    case 4:
        /* No seek enabled */
983 984 985 986
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
B
bellard 已提交
987 988 989 990 991 992 993 994
        return;
    case 1:
        did_seek = 1;
        break;
    default:
        break;
    }
    /* Set the FIFO state */
995 996 997 998 999 1000 1001
    fdctrl->data_dir = direction;
    fdctrl->data_pos = 0;
    FD_SET_STATE(fdctrl->data_state, FD_STATE_DATA); /* FIFO ready for data */
    if (fdctrl->fifo[0] & 0x80)
        fdctrl->data_state |= FD_STATE_MULTI;
    else
        fdctrl->data_state &= ~FD_STATE_MULTI;
B
bellard 已提交
1002
    if (did_seek)
1003 1004 1005 1006 1007 1008
        fdctrl->data_state |= FD_STATE_SEEK;
    else
        fdctrl->data_state &= ~FD_STATE_SEEK;
    if (fdctrl->fifo[5] == 00) {
        fdctrl->data_len = fdctrl->fifo[8];
    } else {
1009
        int tmp;
T
ths 已提交
1010
        fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]);
1011 1012 1013
        tmp = (cur_drv->last_sect - ks + 1);
        if (fdctrl->fifo[0] & 0x80)
            tmp += cur_drv->last_sect;
1014
        fdctrl->data_len *= tmp;
1015
    }
1016
    fdctrl->eot = fdctrl->fifo[6];
1017
    if (fdctrl->dma_en) {
B
bellard 已提交
1018 1019
        int dma_mode;
        /* DMA transfer are enabled. Check if DMA channel is well programmed */
1020
        dma_mode = DMA_get_channel_mode(fdctrl->dma_chann);
B
bellard 已提交
1021
        dma_mode = (dma_mode >> 2) & 3;
1022
        FLOPPY_DPRINTF("dma_mode=%d direction=%d (%d - %d)\n",
1023
                       dma_mode, direction,
1024
                       (128 << fdctrl->fifo[5]) *
1025
                       (cur_drv->last_sect - ks + 1), fdctrl->data_len);
B
bellard 已提交
1026 1027 1028 1029 1030
        if (((direction == FD_DIR_SCANE || direction == FD_DIR_SCANL ||
              direction == FD_DIR_SCANH) && dma_mode == 0) ||
            (direction == FD_DIR_WRITE && dma_mode == 2) ||
            (direction == FD_DIR_READ && dma_mode == 1)) {
            /* No access is allowed until DMA transfer has completed */
1031
            fdctrl->state |= FD_CTRL_BUSY;
B
bellard 已提交
1032
            /* Now, we just have to wait for the DMA controller to
B
bellard 已提交
1033 1034
             * recall us...
             */
1035 1036
            DMA_hold_DREQ(fdctrl->dma_chann);
            DMA_schedule(fdctrl->dma_chann);
B
bellard 已提交
1037
            return;
1038
        } else {
1039
            FLOPPY_ERROR("dma_mode=%d direction=%d\n", dma_mode, direction);
B
bellard 已提交
1040 1041 1042 1043
        }
    }
    FLOPPY_DPRINTF("start non-DMA transfer\n");
    /* IO based transfer: calculate len */
1044
    fdctrl_raise_irq(fdctrl, 0x00);
B
bellard 已提交
1045 1046 1047 1048 1049

    return;
}

/* Prepare a transfer of deleted data */
1050
static void fdctrl_start_transfer_del (fdctrl_t *fdctrl, int direction)
B
bellard 已提交
1051 1052 1053 1054
{
    /* We don't handle deleted data,
     * so we don't return *ANYTHING*
     */
1055
    fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
B
bellard 已提交
1056 1057 1058
}

/* handlers for DMA transfers */
B
bellard 已提交
1059 1060
static int fdctrl_transfer_handler (void *opaque, int nchan,
                                    int dma_pos, int dma_len)
B
bellard 已提交
1061
{
1062 1063 1064
    fdctrl_t *fdctrl;
    fdrive_t *cur_drv;
    int len, start_pos, rel_pos;
B
bellard 已提交
1065 1066
    uint8_t status0 = 0x00, status1 = 0x00, status2 = 0x00;

1067 1068
    fdctrl = opaque;
    if (!(fdctrl->state & FD_CTRL_BUSY)) {
B
bellard 已提交
1069 1070 1071
        FLOPPY_DPRINTF("Not in DMA transfer mode !\n");
        return 0;
    }
1072 1073 1074
    cur_drv = get_cur_drv(fdctrl);
    if (fdctrl->data_dir == FD_DIR_SCANE || fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1075
        status2 = 0x04;
B
bellard 已提交
1076 1077
    if (dma_len > fdctrl->data_len)
        dma_len = fdctrl->data_len;
1078
    if (cur_drv->bs == NULL) {
1079 1080 1081 1082 1083
        if (fdctrl->data_dir == FD_DIR_WRITE)
            fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
        else
            fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        len = 0;
1084 1085
        goto transfer_error;
    }
1086
    rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
B
bellard 已提交
1087 1088
    for (start_pos = fdctrl->data_pos; fdctrl->data_pos < dma_len;) {
        len = dma_len - fdctrl->data_pos;
1089 1090
        if (len + rel_pos > FD_SECTOR_LEN)
            len = FD_SECTOR_LEN - rel_pos;
B
bellard 已提交
1091 1092
        FLOPPY_DPRINTF("copy %d bytes (%d %d %d) %d pos %d %02x "
                       "(%d-0x%08x 0x%08x)\n", len, dma_len, fdctrl->data_pos,
1093 1094
                       fdctrl->data_len, fdctrl->cur_drv, cur_drv->head,
                       cur_drv->track, cur_drv->sect, fd_sector(cur_drv),
B
bellard 已提交
1095
                       fd_sector(cur_drv) * 512);
1096
        if (fdctrl->data_dir != FD_DIR_WRITE ||
1097
            len < FD_SECTOR_LEN || rel_pos != 0) {
1098 1099
            /* READ & SCAN commands and realign to a sector for WRITE */
            if (bdrv_read(cur_drv->bs, fd_sector(cur_drv),
1100
                          fdctrl->fifo, 1) < 0) {
B
bellard 已提交
1101 1102 1103
                FLOPPY_DPRINTF("Floppy: error getting sector %d\n",
                               fd_sector(cur_drv));
                /* Sure, image size is too small... */
1104
                memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
B
bellard 已提交
1105
            }
1106
        }
1107 1108 1109
        switch (fdctrl->data_dir) {
        case FD_DIR_READ:
            /* READ commands */
B
bellard 已提交
1110 1111
            DMA_write_memory (nchan, fdctrl->fifo + rel_pos,
                              fdctrl->data_pos, len);
1112 1113
            break;
        case FD_DIR_WRITE:
1114
            /* WRITE commands */
B
bellard 已提交
1115 1116
            DMA_read_memory (nchan, fdctrl->fifo + rel_pos,
                             fdctrl->data_pos, len);
1117
            if (bdrv_write(cur_drv->bs, fd_sector(cur_drv),
1118
                           fdctrl->fifo, 1) < 0) {
1119 1120 1121
                FLOPPY_ERROR("writting sector %d\n", fd_sector(cur_drv));
                fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
                goto transfer_error;
1122
            }
1123 1124 1125
            break;
        default:
            /* SCAN commands */
1126
            {
1127
                uint8_t tmpbuf[FD_SECTOR_LEN];
1128
                int ret;
B
bellard 已提交
1129
                DMA_read_memory (nchan, tmpbuf, fdctrl->data_pos, len);
1130
                ret = memcmp(tmpbuf, fdctrl->fifo + rel_pos, len);
B
bellard 已提交
1131 1132 1133 1134
                if (ret == 0) {
                    status2 = 0x08;
                    goto end_transfer;
                }
1135 1136
                if ((ret < 0 && fdctrl->data_dir == FD_DIR_SCANL) ||
                    (ret > 0 && fdctrl->data_dir == FD_DIR_SCANH)) {
B
bellard 已提交
1137 1138 1139 1140
                    status2 = 0x00;
                    goto end_transfer;
                }
            }
1141
            break;
B
bellard 已提交
1142
        }
1143 1144
        fdctrl->data_pos += len;
        rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
1145
        if (rel_pos == 0) {
B
bellard 已提交
1146
            /* Seek to next sector */
1147 1148 1149 1150
            FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d) (%d)\n",
                           cur_drv->head, cur_drv->track, cur_drv->sect,
                           fd_sector(cur_drv),
                           fdctrl->data_pos - len);
1151 1152 1153 1154
            /* XXX: cur_drv->sect >= cur_drv->last_sect should be an
               error in fact */
            if (cur_drv->sect >= cur_drv->last_sect ||
                cur_drv->sect == fdctrl->eot) {
1155 1156 1157 1158
                cur_drv->sect = 1;
                if (FD_MULTI_TRACK(fdctrl->data_state)) {
                    if (cur_drv->head == 0 &&
                        (cur_drv->flags & FDISK_DBL_SIDES) != 0) {
1159 1160 1161
                        cur_drv->head = 1;
                    } else {
                        cur_drv->head = 0;
1162 1163 1164
                        cur_drv->track++;
                        if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
                            break;
1165 1166 1167 1168
                    }
                } else {
                    cur_drv->track++;
                    break;
B
bellard 已提交
1169
                }
1170 1171 1172
                FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
                               cur_drv->head, cur_drv->track,
                               cur_drv->sect, fd_sector(cur_drv));
1173 1174
            } else {
                cur_drv->sect++;
B
bellard 已提交
1175 1176 1177
            }
        }
    }
1178
 end_transfer:
1179 1180
    len = fdctrl->data_pos - start_pos;
    FLOPPY_DPRINTF("end transfer %d %d %d\n",
1181
                   fdctrl->data_pos, len, fdctrl->data_len);
1182 1183 1184
    if (fdctrl->data_dir == FD_DIR_SCANE ||
        fdctrl->data_dir == FD_DIR_SCANL ||
        fdctrl->data_dir == FD_DIR_SCANH)
B
bellard 已提交
1185
        status2 = 0x08;
1186
    if (FD_DID_SEEK(fdctrl->data_state))
B
bellard 已提交
1187
        status0 |= 0x20;
1188 1189
    fdctrl->data_len -= len;
    //    if (fdctrl->data_len == 0)
1190
    fdctrl_stop_transfer(fdctrl, status0, status1, status2);
1191
 transfer_error:
B
bellard 已提交
1192

1193
    return len;
B
bellard 已提交
1194 1195 1196
}

/* Data register : 0x05 */
1197
static uint32_t fdctrl_read_data (fdctrl_t *fdctrl)
B
bellard 已提交
1198
{
1199
    fdrive_t *cur_drv;
B
bellard 已提交
1200 1201 1202
    uint32_t retval = 0;
    int pos, len;

1203 1204 1205
    cur_drv = get_cur_drv(fdctrl);
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_CMD) {
B
bellard 已提交
1206 1207 1208
        FLOPPY_ERROR("can't read data in CMD state\n");
        return 0;
    }
1209 1210
    pos = fdctrl->data_pos;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1211 1212
        pos %= FD_SECTOR_LEN;
        if (pos == 0) {
1213
            len = fdctrl->data_len - fdctrl->data_pos;
B
bellard 已提交
1214 1215
            if (len > FD_SECTOR_LEN)
                len = FD_SECTOR_LEN;
1216
            bdrv_read(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1217 1218
        }
    }
1219 1220 1221
    retval = fdctrl->fifo[pos];
    if (++fdctrl->data_pos == fdctrl->data_len) {
        fdctrl->data_pos = 0;
1222
        /* Switch from transfer mode to status mode
B
bellard 已提交
1223 1224
         * then from status mode to command mode
         */
1225
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
1226
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
1227
        } else {
1228
            fdctrl_reset_fifo(fdctrl);
1229 1230
            fdctrl_reset_irq(fdctrl);
        }
B
bellard 已提交
1231 1232 1233 1234 1235 1236
    }
    FLOPPY_DPRINTF("data register: 0x%02x\n", retval);

    return retval;
}

1237
static void fdctrl_format_sector (fdctrl_t *fdctrl)
B
bellard 已提交
1238
{
1239 1240 1241
    fdrive_t *cur_drv;
    uint8_t kh, kt, ks;
    int did_seek;
B
bellard 已提交
1242

1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283
    fdctrl->cur_drv = fdctrl->fifo[1] & 1;
    cur_drv = get_cur_drv(fdctrl);
    kt = fdctrl->fifo[6];
    kh = fdctrl->fifo[7];
    ks = fdctrl->fifo[8];
    FLOPPY_DPRINTF("format sector at %d %d %02x %02x (%d)\n",
                   fdctrl->cur_drv, kh, kt, ks,
                   _fd_sector(kh, kt, ks, cur_drv->last_sect));
    did_seek = 0;
    switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & 0x40)) {
    case 2:
        /* sect too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 3:
        /* track too big */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x80, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 4:
        /* No seek enabled */
        fdctrl_stop_transfer(fdctrl, 0x40, 0x00, 0x00);
        fdctrl->fifo[3] = kt;
        fdctrl->fifo[4] = kh;
        fdctrl->fifo[5] = ks;
        return;
    case 1:
        did_seek = 1;
        fdctrl->data_state |= FD_STATE_SEEK;
        break;
    default:
        break;
    }
    memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
    if (cur_drv->bs == NULL ||
        bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1) < 0) {
T
ths 已提交
1284
        FLOPPY_ERROR("formatting sector %d\n", fd_sector(cur_drv));
1285 1286
        fdctrl_stop_transfer(fdctrl, 0x60, 0x00, 0x00);
    } else {
1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298
        if (cur_drv->sect == cur_drv->last_sect) {
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            /* Last sector done */
            if (FD_DID_SEEK(fdctrl->data_state))
                fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
            else
                fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
        } else {
            /* More to do */
            fdctrl->data_pos = 0;
            fdctrl->data_len = 4;
        }
1299 1300 1301 1302 1303 1304 1305 1306
    }
}

static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
{
    fdrive_t *cur_drv;

    cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1307
    /* Reset mode */
1308
    if (fdctrl->state & FD_CTRL_RESET) {
B
bellard 已提交
1309
        FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
B
bellard 已提交
1310 1311
        return;
    }
1312 1313
    fdctrl->state &= ~FD_CTRL_SLEEP;
    if (FD_STATE(fdctrl->data_state) == FD_STATE_STATUS) {
B
bellard 已提交
1314 1315 1316 1317
        FLOPPY_ERROR("can't write data in status mode\n");
        return;
    }
    /* Is it write command time ? */
1318
    if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA) {
B
bellard 已提交
1319
        /* FIFO data write */
1320 1321 1322
        fdctrl->fifo[fdctrl->data_pos++] = value;
        if (fdctrl->data_pos % FD_SECTOR_LEN == (FD_SECTOR_LEN - 1) ||
            fdctrl->data_pos == fdctrl->data_len) {
1323
            bdrv_write(cur_drv->bs, fd_sector(cur_drv), fdctrl->fifo, 1);
B
bellard 已提交
1324
        }
1325
        /* Switch from transfer mode to status mode
B
bellard 已提交
1326 1327
         * then from status mode to command mode
         */
1328 1329
        if (FD_STATE(fdctrl->data_state) == FD_STATE_DATA)
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1330 1331
        return;
    }
1332
    if (fdctrl->data_pos == 0) {
B
bellard 已提交
1333 1334 1335 1336 1337 1338
        /* Command */
        switch (value & 0x5F) {
        case 0x46:
            /* READ variants */
            FLOPPY_DPRINTF("READ command\n");
            /* 8 parameters cmd */
1339
            fdctrl->data_len = 9;
B
bellard 已提交
1340 1341 1342 1343 1344
            goto enqueue;
        case 0x4C:
            /* READ_DELETED variants */
            FLOPPY_DPRINTF("READ_DELETED command\n");
            /* 8 parameters cmd */
1345
            fdctrl->data_len = 9;
B
bellard 已提交
1346 1347 1348 1349 1350
            goto enqueue;
        case 0x50:
            /* SCAN_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_EQUAL command\n");
            /* 8 parameters cmd */
1351
            fdctrl->data_len = 9;
B
bellard 已提交
1352 1353 1354 1355 1356
            goto enqueue;
        case 0x56:
            /* VERIFY variants */
            FLOPPY_DPRINTF("VERIFY command\n");
            /* 8 parameters cmd */
1357
            fdctrl->data_len = 9;
B
bellard 已提交
1358 1359 1360 1361 1362
            goto enqueue;
        case 0x59:
            /* SCAN_LOW_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_LOW_OR_EQUAL command\n");
            /* 8 parameters cmd */
1363
            fdctrl->data_len = 9;
B
bellard 已提交
1364 1365 1366 1367 1368
            goto enqueue;
        case 0x5D:
            /* SCAN_HIGH_OR_EQUAL variants */
            FLOPPY_DPRINTF("SCAN_HIGH_OR_EQUAL command\n");
            /* 8 parameters cmd */
1369
            fdctrl->data_len = 9;
B
bellard 已提交
1370 1371 1372 1373 1374 1375 1376 1377 1378
            goto enqueue;
        default:
            break;
        }
        switch (value & 0x7F) {
        case 0x45:
            /* WRITE variants */
            FLOPPY_DPRINTF("WRITE command\n");
            /* 8 parameters cmd */
1379
            fdctrl->data_len = 9;
B
bellard 已提交
1380 1381 1382 1383 1384
            goto enqueue;
        case 0x49:
            /* WRITE_DELETED variants */
            FLOPPY_DPRINTF("WRITE_DELETED command\n");
            /* 8 parameters cmd */
1385
            fdctrl->data_len = 9;
B
bellard 已提交
1386 1387 1388 1389 1390 1391 1392 1393 1394
            goto enqueue;
        default:
            break;
        }
        switch (value) {
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("SPECIFY command\n");
            /* 1 parameter cmd */
1395
            fdctrl->data_len = 3;
B
bellard 已提交
1396 1397 1398 1399 1400
            goto enqueue;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("SENSE_DRIVE_STATUS command\n");
            /* 1 parameter cmd */
1401
            fdctrl->data_len = 2;
B
bellard 已提交
1402 1403 1404 1405 1406
            goto enqueue;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("RECALIBRATE command\n");
            /* 1 parameter cmd */
1407
            fdctrl->data_len = 2;
B
bellard 已提交
1408 1409 1410 1411
            goto enqueue;
        case 0x08:
            /* SENSE_INTERRUPT_STATUS */
            FLOPPY_DPRINTF("SENSE_INTERRUPT_STATUS command (%02x)\n",
1412
                           fdctrl->int_status);
B
bellard 已提交
1413
            /* No parameters cmd: returns status if no interrupt */
B
bellard 已提交
1414
#if 0
1415 1416
            fdctrl->fifo[0] =
                fdctrl->int_status | (cur_drv->head << 2) | fdctrl->cur_drv;
B
bellard 已提交
1417 1418 1419 1420 1421 1422 1423
#else
            /* XXX: int_status handling is broken for read/write
               commands, so we do this hack. It should be suppressed
               ASAP */
            fdctrl->fifo[0] =
                0x20 | (cur_drv->head << 2) | fdctrl->cur_drv;
#endif
1424 1425
            fdctrl->fifo[1] = cur_drv->track;
            fdctrl_set_fifo(fdctrl, 2, 0);
1426 1427
            fdctrl_reset_irq(fdctrl);
            fdctrl->int_status = 0xC0;
B
bellard 已提交
1428 1429 1430 1431 1432
            return;
        case 0x0E:
            /* DUMPREG */
            FLOPPY_DPRINTF("DUMPREG command\n");
            /* Drives position */
1433 1434 1435 1436
            fdctrl->fifo[0] = drv0(fdctrl)->track;
            fdctrl->fifo[1] = drv1(fdctrl)->track;
            fdctrl->fifo[2] = 0;
            fdctrl->fifo[3] = 0;
B
bellard 已提交
1437
            /* timers */
1438 1439 1440 1441
            fdctrl->fifo[4] = fdctrl->timer0;
            fdctrl->fifo[5] = (fdctrl->timer1 << 1) | fdctrl->dma_en;
            fdctrl->fifo[6] = cur_drv->last_sect;
            fdctrl->fifo[7] = (fdctrl->lock << 7) |
1442
                (cur_drv->perpendicular << 2);
1443 1444 1445
            fdctrl->fifo[8] = fdctrl->config;
            fdctrl->fifo[9] = fdctrl->precomp_trk;
            fdctrl_set_fifo(fdctrl, 10, 0);
B
bellard 已提交
1446 1447 1448 1449 1450
            return;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("SEEK command\n");
            /* 2 parameters cmd */
1451
            fdctrl->data_len = 3;
B
bellard 已提交
1452 1453 1454 1455 1456
            goto enqueue;
        case 0x10:
            /* VERSION */
            FLOPPY_DPRINTF("VERSION command\n");
            /* No parameters cmd */
B
bellard 已提交
1457
            /* Controller's version */
1458 1459
            fdctrl->fifo[0] = fdctrl->version;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1460 1461 1462 1463 1464
            return;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("PERPENDICULAR_MODE command\n");
            /* 1 parameter cmd */
1465
            fdctrl->data_len = 2;
B
bellard 已提交
1466 1467 1468 1469 1470
            goto enqueue;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("CONFIGURE command\n");
            /* 3 parameters cmd */
1471
            fdctrl->data_len = 4;
B
bellard 已提交
1472 1473 1474 1475 1476
            goto enqueue;
        case 0x14:
            /* UNLOCK */
            FLOPPY_DPRINTF("UNLOCK command\n");
            /* No parameters cmd */
1477 1478 1479
            fdctrl->lock = 0;
            fdctrl->fifo[0] = 0;
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1480 1481 1482 1483 1484
            return;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("POWERDOWN_MODE command\n");
            /* 2 parameters cmd */
1485
            fdctrl->data_len = 3;
B
bellard 已提交
1486 1487 1488 1489 1490
            goto enqueue;
        case 0x18:
            /* PART_ID */
            FLOPPY_DPRINTF("PART_ID command\n");
            /* No parameters cmd */
1491 1492
            fdctrl->fifo[0] = 0x41; /* Stepping 1 */
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1493 1494 1495 1496 1497
            return;
        case 0x2C:
            /* SAVE */
            FLOPPY_DPRINTF("SAVE command\n");
            /* No parameters cmd */
1498 1499
            fdctrl->fifo[0] = 0;
            fdctrl->fifo[1] = 0;
B
bellard 已提交
1500
            /* Drives position */
1501 1502 1503 1504
            fdctrl->fifo[2] = drv0(fdctrl)->track;
            fdctrl->fifo[3] = drv1(fdctrl)->track;
            fdctrl->fifo[4] = 0;
            fdctrl->fifo[5] = 0;
B
bellard 已提交
1505
            /* timers */
1506 1507 1508 1509
            fdctrl->fifo[6] = fdctrl->timer0;
            fdctrl->fifo[7] = fdctrl->timer1;
            fdctrl->fifo[8] = cur_drv->last_sect;
            fdctrl->fifo[9] = (fdctrl->lock << 7) |
1510
                (cur_drv->perpendicular << 2);
1511 1512 1513 1514 1515 1516
            fdctrl->fifo[10] = fdctrl->config;
            fdctrl->fifo[11] = fdctrl->precomp_trk;
            fdctrl->fifo[12] = fdctrl->pwrd;
            fdctrl->fifo[13] = 0;
            fdctrl->fifo[14] = 0;
            fdctrl_set_fifo(fdctrl, 15, 1);
B
bellard 已提交
1517 1518 1519 1520 1521
            return;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("OPTION command\n");
            /* 1 parameter cmd */
1522
            fdctrl->data_len = 2;
B
bellard 已提交
1523 1524 1525 1526 1527
            goto enqueue;
        case 0x42:
            /* READ_TRACK */
            FLOPPY_DPRINTF("READ_TRACK command\n");
            /* 8 parameters cmd */
1528
            fdctrl->data_len = 9;
B
bellard 已提交
1529 1530 1531 1532 1533
            goto enqueue;
        case 0x4A:
            /* READ_ID */
            FLOPPY_DPRINTF("READ_ID command\n");
            /* 1 parameter cmd */
1534
            fdctrl->data_len = 2;
B
bellard 已提交
1535 1536 1537 1538 1539
            goto enqueue;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("RESTORE command\n");
            /* 17 parameters cmd */
1540
            fdctrl->data_len = 18;
B
bellard 已提交
1541 1542 1543 1544 1545
            goto enqueue;
        case 0x4D:
            /* FORMAT_TRACK */
            FLOPPY_DPRINTF("FORMAT_TRACK command\n");
            /* 5 parameters cmd */
1546
            fdctrl->data_len = 6;
B
bellard 已提交
1547 1548 1549 1550 1551
            goto enqueue;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("DRIVE_SPECIFICATION_COMMAND command\n");
            /* 5 parameters cmd */
1552
            fdctrl->data_len = 6;
B
bellard 已提交
1553 1554 1555 1556 1557
            goto enqueue;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("RELATIVE_SEEK_OUT command\n");
            /* 2 parameters cmd */
1558
            fdctrl->data_len = 3;
B
bellard 已提交
1559 1560 1561 1562 1563
            goto enqueue;
        case 0x94:
            /* LOCK */
            FLOPPY_DPRINTF("LOCK command\n");
            /* No parameters cmd */
1564 1565 1566
            fdctrl->lock = 1;
            fdctrl->fifo[0] = 0x10;
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1567 1568 1569 1570 1571
            return;
        case 0xCD:
            /* FORMAT_AND_WRITE */
            FLOPPY_DPRINTF("FORMAT_AND_WRITE command\n");
            /* 10 parameters cmd */
1572
            fdctrl->data_len = 11;
B
bellard 已提交
1573 1574 1575 1576 1577
            goto enqueue;
        case 0xCF:
            /* RELATIVE_SEEK_IN */
            FLOPPY_DPRINTF("RELATIVE_SEEK_IN command\n");
            /* 2 parameters cmd */
1578
            fdctrl->data_len = 3;
B
bellard 已提交
1579 1580 1581 1582
            goto enqueue;
        default:
            /* Unknown command */
            FLOPPY_ERROR("unknown command: 0x%02x\n", value);
1583
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1584 1585 1586
            return;
        }
    }
1587
 enqueue:
1588 1589 1590
    FLOPPY_DPRINTF("%s: %02x\n", __func__, value);
    fdctrl->fifo[fdctrl->data_pos] = value;
    if (++fdctrl->data_pos == fdctrl->data_len) {
B
bellard 已提交
1591 1592 1593
        /* We now have all parameters
         * and will be able to treat the command
         */
1594 1595
        if (fdctrl->data_state & FD_STATE_FORMAT) {
            fdctrl_format_sector(fdctrl);
B
bellard 已提交
1596 1597
            return;
        }
1598 1599 1600 1601 1602 1603 1604 1605
        switch (fdctrl->fifo[0] & 0x1F) {
        case 0x06:
            {
                /* READ variants */
                FLOPPY_DPRINTF("treat READ command\n");
                fdctrl_start_transfer(fdctrl, FD_DIR_READ);
                return;
            }
B
bellard 已提交
1606 1607 1608 1609
        case 0x0C:
            /* READ_DELETED variants */
//            FLOPPY_DPRINTF("treat READ_DELETED command\n");
            FLOPPY_ERROR("treat READ_DELETED command\n");
1610
            fdctrl_start_transfer_del(fdctrl, FD_DIR_READ);
B
bellard 已提交
1611 1612 1613 1614 1615
            return;
        case 0x16:
            /* VERIFY variants */
//            FLOPPY_DPRINTF("treat VERIFY command\n");
            FLOPPY_ERROR("treat VERIFY command\n");
1616
            fdctrl_stop_transfer(fdctrl, 0x20, 0x00, 0x00);
B
bellard 已提交
1617 1618 1619 1620 1621
            return;
        case 0x10:
            /* SCAN_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_EQUAL command\n");
1622
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANE);
B
bellard 已提交
1623 1624 1625 1626 1627
            return;
        case 0x19:
            /* SCAN_LOW_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_LOW_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_LOW_OR_EQUAL command\n");
1628
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANL);
B
bellard 已提交
1629 1630 1631 1632 1633
            return;
        case 0x1D:
            /* SCAN_HIGH_OR_EQUAL variants */
//            FLOPPY_DPRINTF("treat SCAN_HIGH_OR_EQUAL command\n");
            FLOPPY_ERROR("treat SCAN_HIGH_OR_EQUAL command\n");
1634
            fdctrl_start_transfer(fdctrl, FD_DIR_SCANH);
B
bellard 已提交
1635 1636 1637 1638
            return;
        default:
            break;
        }
1639
        switch (fdctrl->fifo[0] & 0x3F) {
B
bellard 已提交
1640 1641
        case 0x05:
            /* WRITE variants */
1642 1643
            FLOPPY_DPRINTF("treat WRITE command (%02x)\n", fdctrl->fifo[0]);
            fdctrl_start_transfer(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1644 1645 1646 1647 1648
            return;
        case 0x09:
            /* WRITE_DELETED variants */
//            FLOPPY_DPRINTF("treat WRITE_DELETED command\n");
            FLOPPY_ERROR("treat WRITE_DELETED command\n");
1649
            fdctrl_start_transfer_del(fdctrl, FD_DIR_WRITE);
B
bellard 已提交
1650 1651 1652 1653
            return;
        default:
            break;
        }
1654
        switch (fdctrl->fifo[0]) {
B
bellard 已提交
1655 1656 1657
        case 0x03:
            /* SPECIFY */
            FLOPPY_DPRINTF("treat SPECIFY command\n");
1658
            fdctrl->timer0 = (fdctrl->fifo[1] >> 4) & 0xF;
B
bellard 已提交
1659
            fdctrl->timer1 = fdctrl->fifo[2] >> 1;
1660
            fdctrl->dma_en = 1 - (fdctrl->fifo[2] & 1) ;
B
bellard 已提交
1661
            /* No result back */
1662
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1663 1664 1665 1666
            break;
        case 0x04:
            /* SENSE_DRIVE_STATUS */
            FLOPPY_DPRINTF("treat SENSE_DRIVE_STATUS command\n");
1667
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1668
            cur_drv = get_cur_drv(fdctrl);
1669
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
B
bellard 已提交
1670
            /* 1 Byte status back */
1671
            fdctrl->fifo[0] = (cur_drv->ro << 6) |
B
bellard 已提交
1672
                (cur_drv->track == 0 ? 0x10 : 0x00) |
1673 1674 1675
                (cur_drv->head << 2) |
                fdctrl->cur_drv |
                0x28;
1676
            fdctrl_set_fifo(fdctrl, 1, 0);
B
bellard 已提交
1677 1678 1679 1680
            break;
        case 0x07:
            /* RECALIBRATE */
            FLOPPY_DPRINTF("treat RECALIBRATE command\n");
1681
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1682
            cur_drv = get_cur_drv(fdctrl);
B
bellard 已提交
1683
            fd_recalibrate(cur_drv);
1684
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1685
            /* Raise Interrupt */
1686
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1687 1688 1689 1690
            break;
        case 0x0F:
            /* SEEK */
            FLOPPY_DPRINTF("treat SEEK command\n");
1691
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1692 1693
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
1694
            if (fdctrl->fifo[2] <= cur_drv->track)
B
bellard 已提交
1695 1696 1697
                cur_drv->dir = 1;
            else
                cur_drv->dir = 0;
1698
            fdctrl_reset_fifo(fdctrl);
1699 1700
            if (fdctrl->fifo[2] > cur_drv->max_track) {
                fdctrl_raise_irq(fdctrl, 0x60);
B
bellard 已提交
1701
            } else {
1702
                cur_drv->track = fdctrl->fifo[2];
B
bellard 已提交
1703
                /* Raise Interrupt */
1704
                fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1705 1706 1707 1708 1709
            }
            break;
        case 0x12:
            /* PERPENDICULAR_MODE */
            FLOPPY_DPRINTF("treat PERPENDICULAR_MODE command\n");
1710 1711
            if (fdctrl->fifo[1] & 0x80)
                cur_drv->perpendicular = fdctrl->fifo[1] & 0x7;
B
bellard 已提交
1712
            /* No result back */
1713
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1714 1715 1716 1717
            break;
        case 0x13:
            /* CONFIGURE */
            FLOPPY_DPRINTF("treat CONFIGURE command\n");
1718 1719
            fdctrl->config = fdctrl->fifo[2];
            fdctrl->precomp_trk =  fdctrl->fifo[3];
B
bellard 已提交
1720
            /* No result back */
1721
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1722 1723 1724 1725
            break;
        case 0x17:
            /* POWERDOWN_MODE */
            FLOPPY_DPRINTF("treat POWERDOWN_MODE command\n");
1726 1727 1728
            fdctrl->pwrd = fdctrl->fifo[1];
            fdctrl->fifo[0] = fdctrl->fifo[1];
            fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1729 1730 1731 1732 1733
            break;
        case 0x33:
            /* OPTION */
            FLOPPY_DPRINTF("treat OPTION command\n");
            /* No result back */
1734
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1735 1736 1737 1738 1739
            break;
        case 0x42:
            /* READ_TRACK */
//            FLOPPY_DPRINTF("treat READ_TRACK command\n");
            FLOPPY_ERROR("treat READ_TRACK command\n");
1740
            fdctrl_start_transfer(fdctrl, FD_DIR_READ);
B
bellard 已提交
1741 1742
            break;
        case 0x4A:
1743
            /* READ_ID */
1744
            FLOPPY_DPRINTF("treat READ_ID command\n");
1745
            /* XXX: should set main status register to busy */
1746
            cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
1747
            qemu_mod_timer(fdctrl->result_timer,
1748
                           qemu_get_clock(vm_clock) + (ticks_per_sec / 50));
B
bellard 已提交
1749 1750 1751 1752 1753
            break;
        case 0x4C:
            /* RESTORE */
            FLOPPY_DPRINTF("treat RESTORE command\n");
            /* Drives position */
1754 1755
            drv0(fdctrl)->track = fdctrl->fifo[3];
            drv1(fdctrl)->track = fdctrl->fifo[4];
B
bellard 已提交
1756
            /* timers */
1757 1758 1759 1760 1761 1762 1763 1764 1765
            fdctrl->timer0 = fdctrl->fifo[7];
            fdctrl->timer1 = fdctrl->fifo[8];
            cur_drv->last_sect = fdctrl->fifo[9];
            fdctrl->lock = fdctrl->fifo[10] >> 7;
            cur_drv->perpendicular = (fdctrl->fifo[10] >> 2) & 0xF;
            fdctrl->config = fdctrl->fifo[11];
            fdctrl->precomp_trk = fdctrl->fifo[12];
            fdctrl->pwrd = fdctrl->fifo[13];
            fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1766 1767 1768
            break;
        case 0x4D:
            /* FORMAT_TRACK */
1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779
            FLOPPY_DPRINTF("treat FORMAT_TRACK command\n");
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
            cur_drv = get_cur_drv(fdctrl);
            fdctrl->data_state |= FD_STATE_FORMAT;
            if (fdctrl->fifo[0] & 0x80)
                fdctrl->data_state |= FD_STATE_MULTI;
            else
                fdctrl->data_state &= ~FD_STATE_MULTI;
            fdctrl->data_state &= ~FD_STATE_SEEK;
            cur_drv->bps =
                fdctrl->fifo[2] > 7 ? 16384 : 128 << fdctrl->fifo[2];
1780
#if 0
1781 1782 1783
            cur_drv->last_sect =
                cur_drv->flags & FDISK_DBL_SIDES ? fdctrl->fifo[3] :
                fdctrl->fifo[3] / 2;
1784
#else
1785
            cur_drv->last_sect = fdctrl->fifo[3];
1786
#endif
1787 1788 1789 1790 1791 1792
            /* TODO: implement format using DMA expected by the Bochs BIOS
             * and Linux fdformat (read 3 bytes per sector via DMA and fill
             * the sector with the specified fill byte
             */
            fdctrl->data_state &= ~FD_STATE_FORMAT;
            fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
B
bellard 已提交
1793 1794 1795 1796
            break;
        case 0x8E:
            /* DRIVE_SPECIFICATION_COMMAND */
            FLOPPY_DPRINTF("treat DRIVE_SPECIFICATION_COMMAND command\n");
1797
            if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x80) {
B
bellard 已提交
1798
                /* Command parameters done */
1799 1800 1801 1802 1803
                if (fdctrl->fifo[fdctrl->data_pos - 1] & 0x40) {
                    fdctrl->fifo[0] = fdctrl->fifo[1];
                    fdctrl->fifo[2] = 0;
                    fdctrl->fifo[3] = 0;
                    fdctrl_set_fifo(fdctrl, 4, 1);
B
bellard 已提交
1804
                } else {
1805
                    fdctrl_reset_fifo(fdctrl);
B
bellard 已提交
1806
                }
1807
            } else if (fdctrl->data_len > 7) {
B
bellard 已提交
1808
                /* ERROR */
1809 1810 1811
                fdctrl->fifo[0] = 0x80 |
                    (cur_drv->head << 2) | fdctrl->cur_drv;
                fdctrl_set_fifo(fdctrl, 1, 1);
B
bellard 已提交
1812 1813 1814 1815 1816
            }
            break;
        case 0x8F:
            /* RELATIVE_SEEK_OUT */
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_OUT command\n");
1817
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1818 1819 1820
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 0;
1821
            if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
1822
                cur_drv->track = cur_drv->max_track - 1;
1823 1824
            } else {
                cur_drv->track += fdctrl->fifo[2];
B
bellard 已提交
1825
            }
1826 1827
            fdctrl_reset_fifo(fdctrl);
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1828 1829 1830 1831 1832
            break;
        case 0xCD:
            /* FORMAT_AND_WRITE */
//                FLOPPY_DPRINTF("treat FORMAT_AND_WRITE command\n");
            FLOPPY_ERROR("treat FORMAT_AND_WRITE command\n");
1833
            fdctrl_unimplemented(fdctrl);
B
bellard 已提交
1834 1835
            break;
        case 0xCF:
1836
            /* RELATIVE_SEEK_IN */
B
bellard 已提交
1837
            FLOPPY_DPRINTF("treat RELATIVE_SEEK_IN command\n");
1838
            fdctrl->cur_drv = fdctrl->fifo[1] & 1;
1839 1840 1841
            cur_drv = get_cur_drv(fdctrl);
            fd_start(cur_drv);
            cur_drv->dir = 1;
1842
            if (fdctrl->fifo[2] > cur_drv->track) {
1843
                cur_drv->track = 0;
1844 1845
            } else {
                cur_drv->track -= fdctrl->fifo[2];
B
bellard 已提交
1846
            }
1847 1848 1849
            fdctrl_reset_fifo(fdctrl);
            /* Raise Interrupt */
            fdctrl_raise_irq(fdctrl, 0x20);
B
bellard 已提交
1850 1851 1852 1853
            break;
        }
    }
}
1854 1855 1856 1857

static void fdctrl_result_timer(void *opaque)
{
    fdctrl_t *fdctrl = opaque;
1858
    fdrive_t *cur_drv = get_cur_drv(fdctrl);
1859

1860 1861 1862 1863 1864 1865 1866
    /* Pretend we are spinning.
     * This is needed for Coherent, which uses READ ID to check for
     * sector interleaving.
     */
    if (cur_drv->last_sect != 0) {
        cur_drv->sect = (cur_drv->sect % cur_drv->last_sect) + 1;
    }
1867 1868
    fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
}