The purpose of this function is to fetch link state
and link speed for given NIC name from the SYSFS.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is a prerequisite to the fix for the fix to:

  https://bugzilla.redhat.com/show_bug.cgi?id=1025397

num_virtual_functions needs to be size_t in order to use the
VIR_APPEND_ELEMENT macro.

'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up remaining offenders in src/util.

* src/util/virnetdev.h (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Use intended type.
* src/util/virnetdevbandwidth.h (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.h (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.h (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.h (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.h (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.h
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate): Likewise.
* src/util/virnetlink.h (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
* src/util/virnetdev.c (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix fallout.
* src/util/virnetdevbandwidth.c (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.c (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.c (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.c (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate)
(virNetDevVPortProfileOpSetLink, virNetDevVPortProfileOpCommon)
(virNetDevVPortProfileOp8021Qbg, virNetDevVPortProfileOp8021Qbh):
Likewise.
* src/util/virnetlink.c (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit b9c6b073 dropped the version of virNetDevSetupControl
that didn't check for NULL arguments, but we call it like that
in virNetDevBridgeDelete.

This method is useful not only in virnetdev.c.

Commit ccff335f added ATTRIBUTE_NONNULL for an attribute which is not
a pointer and made files including virnetdev.h not compilable, so fix
that.

network: static route support for <network>

This patch adds the <route> subelement of <network> to define a static
route.  the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".

These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:

  ip route add <address>/<prefix> via <gateway> \
               dev <virbr-bridge> proto static metric <metric>

Tests are done to validate that the input data are correct.  For
example, for a static route ip definition, the address must be a
network address and not a host address.  Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).

prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.

Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:

    RTNETLINK answers: File exists

This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future).  Caution should be
used when manipulating route metrics, especially for a default route.

Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better.  But,
that is being left as an exercise for another day.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>

The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements

util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
     resp = (struct nlmsghdr *)*recvbuf;
            ^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
     resp = (struct nlmsghdr *)recvbuf;

Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename all the pciDeviceXXX and pciXXXDevice APIs to have a
fixed virPCIDevice name prefix

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

The network pool should be able to keep track of both network device
names and PCI addresses, and return the appropriate one in the
actualDevice when networkAllocateActualDevice is called.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

Until now, the nl_pid of the source address of every message sent by
virNetlinkCommand has been set to the value of getpid(). Most of the
time this doesn't matter, and in the one case where it does
(communication with lldpad), it previously was the proper thing to do,
because the netlink event service (which listens on a netlink socket
for unsolicited messages from lldpad) coincidentally always happened
to bind with a local nl_pid == getpid().

With the fix for:

  https://bugzilla.redhat.com/show_bug.cgi?id=816465

that particular nl_pid is now effectively a reserved value, so the
netlink event service will always bind to something else
(coincidentally "getpid() + (1 << 22)", but it really could be
anything). The result is that communication between lldpad and
libvirtd is broken (lldpad gets a "disconnected" error when it tries
to send a directed message).

The solution to this problem caused by a solution, is to query the
netlink event service's nlhandle for its "local_port", and send that
as the source nl_pid (but only when sending to lldpad, of course - in
other cases we maintain the old behavior of sending getpid()).

There are two cases where a message is being directed at lldpad - one
in virNetDevLinkDump, and one in virNetDevVPortProfileOpSetLink.

The case of virNetDevVPortProfileOpSetLink is simplest to explain -
only if !nltarget_kernel, i.e. the message isn't targetted for the
kernel, is the dst_pid set (by calling
virNetDevVPortProfileGetLldpadPid()), so only in that case do we call
virNetlinkEventServiceLocalPid() to set src_pid.

For virNetDevLinkDump, it's a bit more complicated. The call to
virNetDevVPortProfileGetLldpadPid() was effectively up one level (in
virNetDevVPortProfileOpCommon), although obscured by an unnecessary
passing of a function pointer. This patch removes the function
pointer, and calls virNetDevVPortProfileGetLldpadPid() directly in
virNetDevVPortProfileOpCommon - if it's doing this, it knows that it
should also call virNetlinkEventServiceLocalPid() to set src_pid too;
then it just passes src_pid and dst_pid down to
virNetDevLinkDump. Since (src_pid == 0 && dst_pid == 0) implies that
the kernel is the destination, there is no longer any need to send
nltarget_kernel as an arg to virNetDevLinkDump, so it's been removed.

The disparity between src_pid being int and dst_pid being uint32_t may
be a bit disconcerting to some, but I didn't want to complicate
virNetlinkEventServiceLocalPid() by having status returned separately
from the value.

This patch adds the following:

- functions to set and get vf configs
- Functions to replace and store vf configs (Only mac address is handled today.
  But the functions can be easily extended for vlans and other vf configs)
- function to dump link dev info (This is moved from virnetdevvportprofile.c)
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'.  Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.

Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.

* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.

This functions enables us to get the Virtual Functions attached to
a Physical function given the name of a SR-IOV physical functio.

In order to accomplish the task, added a getter function pciGetDeviceAddrString
to get the BDF of the Virtual Function in a char array.

Move virNetDevIsVirtualFunction, virNetDevGetVirtualFunctionIndex
and virNetDevGetPhysicalFunction to virnetdev.c

* src/util/interface.c, src/util/interface.h, src/util/virnetdev.c,
  src/util/virnetdev.h: Move APIs

* src/util/interface.c, src/util/interface.h: Remove virNetDevValidateConfig
* src/util/virnetdev.c, src/util/virnetdev.h: Add virNetDevValidateConfig

Move the virNetDevGetIPv4Address function to virnetdev.c

* util/interface.c, util/interface.h: Remove virNetDevGetIPv4Address
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIPv4Address

Move virNetDevGetIndex & virNetDevGetVLanID to virnetdev.c to
suit their functional purpose

* util/interface.c, util/interface.h: Remove virNetDevGetIndex &
  virNetDevGetVLanID
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIndex &
  virNetDevGetVLanID

Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong

* util/interface.c, util/interface.h: Remove
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress

Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.

Move the remaining content of the file to src/util/virnetdevveth.c

* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
  virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
  src/lxc/lxc_driver.c: Update include paths

The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines

 - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
 - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
 - src/util/virsocketaddr.c: virSocketAddr and APIs
 - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
   for virNetDevBandwidth
 - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
   for virNetDevVPortProfile

* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
  src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
  src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
  src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
  src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
  src/conf/domain_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/conf/nwfilter_conf.h,
  src/esx/esx_util.h, src/network/bridge_driver.c,
  src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
  src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
  src/util/virnetdev.h, src/util/virnetdevtap.c,
  tools/virsh.c: Update include files

Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives