- 27 7月, 2016 2 次提交
-
-
由 John Ferlan 提交于
Nothing in the code path after the removed call has needs/uses the alias anyway (as would be the case for command line building or talking to monitor). The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree as well as during virDomainDeviceInfoFree for host devices. For persistent domains, the domain definition (including aliases) gets freed a few screens later when it's replaced with newDef. For transient domains, the definition is freed/unref'd along with the virDomainObj a few moments later.
-
由 John Ferlan 提交于
Since commit id 'fb063500' these are no longer called, so remove them
-
- 26 7月, 2016 1 次提交
-
-
由 Tomasz Flendrich 提交于
The address sets (pci, ccw, virtio serial) are currently cached in qemu private data, but all the information required to recreate these sets is in the domain definition. Therefore I am removing the redundant data and adding a way to recalculate these sets. Add a function that calculates the virtio serial address set from the domain definition. Credit goes to Cole Robinson.
-
- 21 7月, 2016 6 次提交
-
-
由 Ján Tomko 提交于
When parsing a command line with USB devices that have no address specified, QEMU automatically adds a USB hub if the device would fill up all the available USB ports. To help most of the users, add one hub if there are more USB devices than available ports. For wilder configurations, expect the user to provide us with more hubs and/or controllers.
-
由 Ján Tomko 提交于
USB disks, redirected devices, host devices and serial devices are supported.
-
由 Ján Tomko 提交于
Automatically assign addresses to USB devices. Just like reserving, this is only done for newly defined domains. https://bugzilla.redhat.com/show_bug.cgi?id=1215968
-
由 Ján Tomko 提交于
Check if they fit on the USB controllers the domain has, and error out if two devices try to use the same address.
-
由 Ján Tomko 提交于
Walk through all the usb controllers in the domain definition and create the corresponding structures in the virDomainUSBAddressSet.
-
由 Ján Tomko 提交于
A new type to track USB addresses. Every <controller type='usb' index='i'/> is represented by an object of type virDomainUSBAddressHub located at buses[i]. Each of these hubs has up to 'nports' ports. If a port is occupied, it has the corresponding bit set in the 'ports' bitmap, e.g. port 1 would have the 0th bit set. If there is a hub on this port, then hubs[i] will point to this hub.
-
- 19 7月, 2016 3 次提交
-
-
由 John Ferlan 提交于
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021 If the volume xml was looking to create a luks volume take the necessary steps in order to make that happen. The processing will be: 1. create a temporary file (virStorageBackendCreateQemuImgSecretPath) 1a. use the storage driver state dir path that uses the pool and volume name as a base. 2. create a secret object (virStorageBackendCreateQemuImgSecretObject) 2a. use an alias combinding the volume name and "_luks0" 2b. add the file to the object 3. create/add luks options to the commandline (virQEMUBuildLuksOpts) 3a. at the very least a "key-secret=%s" using the secret object alias 3b. if found in the XML the various "cipher" and "ivgen" options Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Move to virqemu and rename to virQEMUBuildBufferEscapeComma. This can then be shared by the storage driver when it builds the command line for qemuimg
-
由 Olga Krishtal 提交于
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>
-
- 18 7月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
In preparation to tracking which USB addresses are occupied. Introduce two helper functions for printing the port path as a string and appending it to a virBuffer.
-
- 12 7月, 2016 2 次提交
-
-
由 Ján Tomko 提交于
A device with an attribute 'model', with just one model so far: <devices> ... <iommu model='intel'/> </devices> https://bugzilla.redhat.com/show_bug.cgi?id=1235580
-
由 Daniel P. Berrange 提交于
Currently many users of virConf APIs are defining the same macros for calling virConfValue() and then doing type checking. To remove this repeated code, add a set of typesafe accessor methods. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 7月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Libxl is the last user and I don't have the toolchain prepared to compile the libxl driver. Move it to the libxl driver to avoid having to refactor the code.
-
- 04 7月, 2016 3 次提交
-
-
由 Erik Skultety 提交于
Provide a separate method to free a logging filter object. This will come handy once a method to create an individual logging filter object is introduced. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
This is just a convenience method for discarding a list of outputs instead of using a 'for' loop everywhere. It is safe to pass -1 as the number of elements in the list as well as passing NULL as list reference. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
Provide a separate method to free a logging output object. This will come handy once a method to create an individual logging output object is introduced. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 02 7月, 2016 2 次提交
-
-
由 Laine Stump 提交于
This patch takes the code out of lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and IP routes to the interface, and puts it into a utility function virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by anyone. One small change in functionality - lxcContainerRenameAndEnableInterfaces() previously would add all IP addresses to the interface while it was still offline, then set the interface online, and then add the routes. Because I don't want the utility function to set the interface online, I've moved this up so the interface is first set online, then IP addresses and routes are added. This is the same order that the network service from initscripts (in ifup-ether) does it, so it shouldn't pose any problem (and hasn't, in the tests that I've run). (This patch had been pushed earlier in commit f1e0d0da, but was reverted in commit 05eab475 because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 Laine Stump 提交于
This is a generic version of virDomainDefMetadataSanitize() - the same functionality is now needed for network metadata.
-
- 01 7月, 2016 1 次提交
-
-
由 Ján Tomko 提交于
A helper that will execute a callback on every USB device in the domain definition. With an ability to skip USB hubs, since we will want to treat them differently in some cases.
-
- 27 6月, 2016 9 次提交
-
-
由 Laine Stump 提交于
This patch takes the code out of lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and IP routes to the interface, and puts it into a utility function virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by anyone. One small change in functionality - lxcContainerRenameAndEnableInterfaces() previously would add all IP addresses to the interface while it was still offline, then set the interface online, and then add the routes. Because I don't want the utility function to set the interface online, I've moved this up so the interface is first set online, then IP addresses and routes are added. This is the same order that the network service from initscripts (in ifup-ether) does it, so it shouldn't pose any problem (and hasn't, in the tests that I've run).
-
由 Laine Stump 提交于
There are currently two places in the domain where this combination is used, and there is about to be another. This patch puts them together for brevity and uniformity. As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute objects, the new virNetDevIPInfo object will need to be accessed by a utility function that calls low level Netlink functions (so we don't want it to be in the conf directory) and will be called from multiple hypervisor drivers (so it can't be in any hypervisor directory); the most appropriate place is thus once again the util directory. The parse and format functions are in conf/domain_conf.c because only the domain XML (i.e. *not* the network XML) has this exact combination of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will end up being the only caller to virDomainNetRoutesFormat() and virDomainNetIPsFormat(), so it will just subsume those functions in a later patch, but we can't do that until they are no longer called. (It would have been nice to include the interface name within the virNetDevIPInfo object (with a slight name change), but that can't be done cleanly, because in each case the interface name is provided in a different place in the XML relative to the routes and IP addresses, so putting it in this object would actually make the code more confused rather than simpler).
-
由 Laine Stump 提交于
These functions all need to be called from a utility function that must be located in the util directory, so we move them all into util/virnetdevip.[ch] now that it exists. Function and struct names were appropriately changed for the new location, but all code is unchanged aside from motion and renaming.
-
由 Laine Stump 提交于
This patch splits virnetdev.[ch] into multiple files, with the new virnetdevip.[ch] containing all the functions related to setting and retrieving IP-related info for a device (both addresses and routes).
-
由 Laine Stump 提交于
We need to clear these out without freeing the object completely.
-
由 Laine Stump 提交于
I'm tired of mistyping this all the time, so let's do it the same all the time (similar to how we changed all "Pci" to "PCI" awhile back). (NB: I've left alone some things in the esx and vbox drivers because I'm unable to compile them and they weren't obviously *not* a part of some API. I also didn't change a couple of variables named, e.g. "somethingIptables", because they were derived from the name of the "iptables" command)
-
由 Laine Stump 提交于
These had been declared in conf/device_conf.h, but then used in util/virnetdev.c, meaning that we had to #include conf/device_conf.h in virnetdev.c (which we have for a long time said shouldn't be done. This caused a bigger problem when I tried to #include util/virnetdev.h in a file in src/conf (which is allowed) - for some reason the "device_conf.h: File not found" error. The solution is to move the data types and functions used in util sources from conf to util. Some names were adjusted during the move ("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" --> "VIR_NETDEV_IF")
-
由 Laine Stump 提交于
virNetDevLinkDump should have been in virnetlink.c, but that file didn't exist yet when the function was created. It didn't really matter until now - I found that having virnetlink.h included by virnetdev.h caused build problems when trying to #include virnetdev.h in a .c file in src/conf (due to missing directory in -I). Rather than fix that to further institutionalize the incorrect placement of this one function, this patch moves the function.
- 26 6月, 2016 1 次提交
-
-
由 Nikolay Shirokovskiy 提交于
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
- 25 6月, 2016 2 次提交
-
-
由 Daniel P. Berrange 提交于
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not reflect any change in the lifecycle of the storage pool. It should thus not be part of the storage pool lifecycle event set, but rather be a top level event in its own right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH to replace it. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Shivaprasad G Bhat 提交于
This kvmGetMaxVCPUs() needs to be used at two different places so move it to utils with appropriate name and mark it as private global now. Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
- 24 6月, 2016 6 次提交
-
-
由 Ján Tomko 提交于
A helper function that does not report any errors.
-
由 Ján Tomko 提交于
Just like virDirOpen, but it returns 0 without reporting an error on ENOENT.
-
由 Ján Tomko 提交于
A helper that calls opendir and reports an error if it fails.
-
由 Ján Tomko 提交于
Introduce a helper that only calls closedir if DIR* is non-NULL and sets it to NULL afterwards.
-
由 John Ferlan 提交于
Add utility to format the virSecretLookupTypeDefPtr in XML Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Move to virsecret.c and rename to virSecretLookupParseSecret. Also convert to usage xmlNodePtr and virXMLPropString rather than virXPathString. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-