- 25 9月, 2013 1 次提交
-
-
由 Hongwei Bi 提交于
Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 20 9月, 2013 1 次提交
-
-
由 Simone Gotti 提交于
After commit 8aecd351 it'll detect that a required option is not defined and it will assert and exit with: virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed. Problem has been latent since commit ed23b106. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 17 9月, 2013 5 次提交
-
-
由 Peter Krempa 提交于
Some systems apparently have a global variable/function called remove and thus break compilation of virsh-domain.c. Rename the variable to avoid this. Reported by GuanQiang.
-
由 Peter Krempa 提交于
The metadata modification functions will support modification of the XML metadata. Add a virsh command to allow using this approach.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Line up the array so that the grid is visible.
-
由 Peter Krempa 提交于
The "cmd" variable is actually used so remove the attribute.
-
- 16 9月, 2013 1 次提交
-
-
由 yangdongsheng 提交于
Since the maxvcpus command query the maximum number of virtual CPUs supported for a guest VM on this connection, it should be in virsh-host.c but not virsh-domain.c. Signed-off-by: Nyangdongsheng <yangds.fnst@cn.fujitsu.com>
-
- 12 9月, 2013 1 次提交
-
-
由 Jiri Denemark 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1006864 Commit 38ab1225 changed the default value of ret from true to false but forgot to set ret = true when job is NONE. Thus, virsh domjobinfo returned 1 when there was no job running for a domain but it used to (and should) return 0 in this case.
-
- 05 9月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
The VIR_FREE() macro will cast away any const-ness. This masked a number of places where we passed a 'const char *' string to VIR_FREE. Fortunately in all of these cases, the variable was not in fact const data, but a heap allocated string. Fix all the variable declarations to reflect this. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 03 9月, 2013 3 次提交
-
-
由 Peter Krempa 提交于
Move the function to virsh.c to the rest of the TTY managing functions and change the code so that it mirrors the rest.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
The vshWatchJob function registers a SIGINT handler that is used to abort the active job and does not terminate virsh. Unfortunately, this breaks when using the ssh transport as SIGINT is sent to the foreground process group including the ssh transport processes which terminate. This breaks the connection and migration is left in a insane state. With this patch the terminal is modified to ignore key binding that sends SIGINT and does the handling manually. Resoves: https://bugzilla.redhat.com/show_bug.cgi?id=983348
-
- 01 9月, 2013 1 次提交
-
-
由 Hongwei Bi 提交于
When virBufferError is ok in cmdAttachDisk, the latter should 'goto cleanup', instead of returning a false to prevent memory leaking. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 30 8月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
-
- 27 8月, 2013 2 次提交
-
-
由 Guannan Ren 提交于
virsh cpu-stats guest --start 0 --count 3 It outputs right but the return value is 1 rather than 0 echo $? 1 Found by running libvirt-autotest ./run -t libvirt --tests virsh_cpu_stats
-
由 Tomas Meszaros 提交于
Change info_domfstrim and opts_lxc_enter_namespace initialization style to C99.
-
- 20 8月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Use the new semantics of vshStringToArray to avoid leaking the array of volumes to be deleted. The array would be leaked in case the first volume was found in the domain definition. Also refactor the code a bit to sanitize naming of variables hoding arrays and dimensions of the arrays. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
-
- 17 8月, 2013 1 次提交
-
-
由 Don Dugger 提交于
Currently the virConnectBaselineCPU API does not expose the CPU features that are part of the CPU's model. This patch adds a new flag, VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly list all features that are part of that model. Signed-off-by: NDon Dugger <donald.d.dugger@intel.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 16 8月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=997765 ==1349431== 8 bytes in 1 blocks are definitely lost in loss record 11 of 760 ==1349431== at 0x4C2A554: calloc (vg_replace_malloc.c:593) ==1349431== by 0x4E9AA3E: virAllocN (in /usr/lib64/libvirt.so.0.1001.1) ==1349431== by 0x4EF28C4: virXPathNodeSet (in /usr/lib64/libvirt.so.0.1001.1) ==1349431== by 0x130B83: cmdCPUBaseline (in /usr/bin/virsh) ==1349431== by 0x12C608: vshCommandRun (in /usr/bin/virsh) ==1349431== by 0x12889A: main (in /usr/bin/virsh)
-
- 15 8月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
When undefining a domain with storage when the volume isn't managed by libvirt the name and path strings weren't freed properly. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
-
- 13 8月, 2013 2 次提交
-
-
由 Peter Krempa 提交于
To avoid having to assign a failure code to the returned variable switch this function to negative logic. This will fix issue with invalid number of cpus returning success return code. https://bugzilla.redhat.com/show_bug.cgi?id=996466
-
由 Eric Blake 提交于
I attempted 'virsh blockcopy $dom vda $path --wait --verbose', then hit Ctrl-C; I was a bit surprised to see this error message: Block Copy: [ 3 %]error: failed to query job for disk vda when I had been expecting: Block Copy: [ 3 %] Copy aborted * tools/virsh-domain.c (cmdBlockCopy): Print graceful exit message rather than error when ctrl-c interrupts job. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 23 7月, 2013 1 次提交
-
-
由 Guannan Ren 提交于
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=923053 When cdrom is block type, the virsh change-media failed to insert source info because virsh uses "<source block='/dev/sdb'/>" while the correct name of the attribute for block disks is "dev".
-
- 18 7月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Add a "--pass-fds N,M,..." arg to the virsh start/create methods. This allows pre-opened file descriptors from the shell to be passed on into the guest Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 11 7月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Convert the type of loop iterators named 'i', 'j', k', 'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or 'unsigned int', also santizing 'ii', 'jj', 'kk' to use the normal 'i', 'j', 'k' naming Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 10 7月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 25 6月, 2013 2 次提交
-
-
由 Jiri Denemark 提交于
The parameter specifies connection parameters to use for migrating client's connection to domain's graphical console.
-
由 Jiri Denemark 提交于
-
- 18 6月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Paolo Bonzini pointed out that it's actually possible to migrate a qemu instance that was paused due to I/O error and it will be able to work on the destination if the storage is accessible. This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the migration in case an I/O error happens while it's being performed and allows migration without this flag. This flag can be possibly used for other error reasons that may be introduced in the future.
-
- 10 6月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
This patch fixes changes done in commit 29c1e913 that was pushed without implementing review feedback. The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and documentation makes the difference between regular hotplug and this new functionality more explicit. The virsh options that enable the use of the new flag are changed to "--guest" and the documentation is fixed too.
-
- 07 6月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
This flag will allow to use qemu guest agent commands to disable (offline) and enable (online) processors in a live guest that has the guest agent running.
-
- 04 6月, 2013 1 次提交
-
-
由 Osier Yang 提交于
Commit 6e73850b support to set wwn for disks, but it was not exposed to attach-disk.
-
- 03 6月, 2013 4 次提交
-
-
由 Peter Krempa 提交于
Check the returned value for NULL and take the cleanup path appropriately if the API fails.
-
由 Peter Krempa 提交于
Use the approach established in commit 69ce3ffa to improve this function too.
-
由 Peter Krempa 提交于
Use the approach established in commit 69ce3ffa to improve this function too.
-
由 Peter Krempa 提交于
Use the approach established in commit 69ce3ffa to improve this function too.
-
- 30 5月, 2013 1 次提交
-
-
由 Cole Robinson 提交于
Because it's a valid combination. p2p still uses a separate channel for qemu migration, so there's value in letting the user specify a manual migrate URI for overriding auto-port, or libvirt's FQDN lookup. What _isn't_ allowed is --migrateuri and TUNNELLED, since there is no separate migration channel. Disallow that instead
-
- 28 5月, 2013 1 次提交
-
-
由 Eric Blake 提交于
I noticed several unusual spacings in for loops, and decided to fix them up. See the next commit for the syntax check that found all of these. * examples/domsuspend/suspend.c (main): Fix spacing. * python/libvirt-override.c: Likewise. * src/conf/interface_conf.c: Likewise. * src/security/virt-aa-helper.c: Likewise. * src/util/virconf.c: Likewise. * src/util/virhook.c: Likewise. * src/util/virlog.c: Likewise. * src/util/virsocketaddr.c: Likewise. * src/util/virsysinfo.c: Likewise. * src/util/viruuid.c: Likewise. * src/vbox/vbox_tmpl.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * tools/virsh-domain-monitor.c (vshDomainStateToString): Drop default case, to let compiler check us. * tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 23 5月, 2013 1 次提交
-
-
由 Martin Kletzander 提交于
-