The libxl driver currently sets the disk backend to
LIBXL_DISK_BACKEND_TAP when <driver name='file'> is specified
in the <disk> config.  qdisk should be prefered with this
configuration, otherwise existing configuration such as the
following, which worked with the old Xen driver, will not work
with the libxl driver

  <disk type='file' device='cdrom'>
    <driver name='file'/>
    <source file='/path/to/some/iso'/>
    <target dev='hdc' bus='ide'/>
    <readonly/>
  </disk>

In addition, tap performs poorly compared to qdisk.

Generally, <interface> ... <script> is only supported for
type='ethernet'.  Due to the long and pervasive use of

  <interface type='bridge'>
    ...
    <script path='foo'/>
  </interface>

in Xen domain configuration, it was agreed to allow the use
of <script> with type='bridge' for backwards compatibility.  See
the following discussion thread

http://www.redhat.com/archives/libvir-list/2013-April/msg00755.html

This patch limits the use of <script> to interface types ethernet
and bridge, raising an unsupported config error if <script> is
specified for all other interface types.

While at it, use VIR_ERR_CONFIG_UNSUPPORTED instead of
VIR_ERR_INTERNAL_ERROR when reporting unsupported interface types.

Add support for <interface type='network'> in the libxl driver.

There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:

<capabilities>

  <host>
    <uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
    <cpu>
      <arch>x86_64</arch>
      <model>Westmere</model>
      <vendor>Intel</vendor>
      <topology sockets='1' cores='1' threads='1'/>
      ...
      <pages unit='KiB' size='4'/>
      <pages unit='KiB' size='2048'/>
      <pages unit='KiB' size='1048576'/>
    </cpu>
    ...
    <topology>
      <cells num='4'>
        <cell id='0'>
          <memory unit='KiB'>4054408</memory>
          <pages unit='KiB' size='4'>1013602</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>4071072</memory>
          <pages unit='KiB' size='4'>1017768</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
          </cpus>
        </cell>
        ...
      </cells>
    </topology>
    ...
  </host>

  <guest/>

</capabilities>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If user or management application wants to create a guest,
it may be useful to know the cost of internode latencies
before the guest resources are pinned. For example:

<capabilities>

  <host>
    ...
    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>4004132</memory>
          <distances>
            <sibling id='0' value='10'/>
            <sibling id='1' value='20'/>
          </distances>
          <cpus num='2'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
            <cpu id='2' socket_id='0' core_id='2' siblings='2'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>4030064</memory>
          <distances>
            <sibling id='0' value='20'/>
            <sibling id='1' value='10'/>
          </distances>
          <cpus num='2'>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
            <cpu id='3' socket_id='0' core_id='2' siblings='3'/>
          </cpus>
        </cell>
      </cells>
    </topology>
    ...
  </host>
  ...
</capabilities>

We can see the distance from node1 to node0 is 20 and within nodes 10.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To make it easier to test, change libxlBuildDomainConfig so
that it takes a virPortAllocatorPtr instead of the larger
libxlDriverPrivatePtr object.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To make it easier to unit test, change libxlBuildDomainConfig
so that it takes 'virDomainDefPtr' and 'libxl_ctx *' objects
as separate parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A VIR_DOMAIN_NET_TYPE_HOSTDEV interface device is really a hostdev
device, which is created by the libxl driver in libxlMakePCIList().
There is no need to create a libxl_device_nic for such hostdev
devices, so skip interfaces of type VIR_DOMAIN_NET_TYPE_HOSTDEV in
libxlMakeNicList().
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The XML config for a CDROM device can be without a source path,
indicating that there is no media present. Without this change
the libxl driver fails to start a guest in that case because
the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format
type and tries to stat the NULL pointer that gets passed on.

> libxl: error: libxl_device.c:265:libxl__device_disk_set_backend:
> Disk vdev=hdc failed to stat: (null): Bad address
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Commit d9f19c30 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().

This causes the daemon to fail on systems that have not had the directory
created before.

Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Part of a series of cleanups to use new accessor methods.

* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules.  For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL.  These fields were left unset by the libxl
driver, causing libxl to ignore any user settings.  E.g. with

  <graphics type='vnc' port='5950'/>

port would be ignored and QEMU would instead be invoked with

  -vnc 127.0.0.1:0,to=99

Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDavid Kiarie <davidkiarie4@gmail.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add pci passthrough to libxl driver, support attach-device, detach-device and
start a vm with pci hostdev specified.

Only tested on v7 but the v8 equivalent seems pretty obvious.

XEN_CAP_REGEX already accepts more than it should (e.g. x86_64p or x86_32be)
but I have stuck with the existing pattern.

With this I can create a guest from:
  <domain type='xen'>
    <name>libvirt-test</name>
    <uuid>6343998e-9eda-11e3-98f6-77252a7d02f3</uuid>
    <memory>393216</memory>
    <currentMemory>393216</currentMemory>
    <vcpu>1</vcpu>
    <os>
      <type arch='armv7l' machine='xenpv'>linux</type>
      <kernel>/boot/vmlinuz-arm-native</kernel>
      <cmdline>console=hvc0 earlyprintk debug root=/dev/xvda1</cmdline>
    </os>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
      <disk type='block' device='disk'>
        <source dev='/dev/marilith-n0/debian-disk'/>
        <target dev='xvda1'/>
      </disk>
      <interface type='bridge'>
        <mac address='8e:a7:8e:3c:f4:f6'/>
        <source bridge='xenbr0'/>
      </interface>
    </devices>
  </domain>

Using virsh create and I can destroy it too.

Currently virsh console fails with:
  Connected to domain libvirt-test
  Escape character is ^]
  error: internal error: cannot find character device <null>

I haven't investigated yet.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This basically reverts commit ba64b971
"libxl: Allow libxl to set NIC devid". However assigning devid's
before calling libxlMakeNic does not work as that is calling
libxl_device_nic_init which sets it back to -1.
Right now auto-assignment only works in the hotplug case. But even if
that would be fixed at some point (if that is possible at all), this
would add a weird dependency between Xen and libvirt versions.
The change here should accept any auto-assignment that makes it into
libxl_device_nic_init. My understanding is that a caller always is
allowed to make the devid choice itself. And assuming libxlMakeNicList
is only used on domain creation, a sequential numbering should be ok.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

As pointed out by the Xen folks [1], HVM nics should always be set
to type LIBXL_NIC_TYPE_VIF_IOEMU unless the user explicity requests
LIBXL_NIC_TYPE_VIF via model='netfront'.  The current logic in
libxlMakeNic() only sets the nictype to LIBXL_NIC_TYPE_VIF_IOEMU if
a model is specified that is not 'netfront', which breaks PXE booting
configurations where no model is specified (i.e. use the hypervisor
default).
Reported-by: NStefan Bader <stefan.bader@canonical.com>

[1] https://www.redhat.com/archives/libvir-list/2013-December/msg01156.html

Report the error in virPortAllocatorAcquire instead
of doing it in every caller.

The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE

This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.

Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.

To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.

The regular expression used to determine guest capabilities
was compiled in libxlCapsInitHost() but used in libxlCapsInitGuests().
Move compilation to libxlCapsInitGuests() where it is used, and free
the compiled regex after use.  Ensure not to free the regex if
compilation fails.

Change libxlGetAutoballoonConf() function to return an int
for success/failure, and fail if regcomp fails.

Change source file copyright notice to prevailing libvirt style.

Now that most fields of libxlDriverPrivate struct are immutable
or self-locking, there is no need to acquire the driver lock in
much of the libxl driver.

The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.

libxlMakeDomCreateInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain.  Switch to using the per-domain
libxl ctx.

libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object.  Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().

Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files.  This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.

Detecting whether or not to autoballoon is configuration related,
so move the code to libxl_conf.

If we reached cleanup: prior to allocating cpus, it was possible that
'nr_nodes' had a value, but cpus was NULL leading to a possible NULL
deref. Add a 'cpus' as an end condition to for loop

From: Dario Faggioli <dario.faggioli@citrix.com>

Starting from Xen 4.2, libxl has all the bits and pieces in place
for retrieving an adequate amount of information about the host
NUMA topology. It is therefore possible, after a bit of shuffling,
to arrange those information in the way libvirt wants to present
them to the outside world.

Therefore, with this patch, the <topology> section of the host
capabilities is properly populated, when running on Xen, so that
we can figure out whether or not we're running on a NUMA host,
and what its characteristics are.

[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// capabilities
<capabilities>
  <host>
    <cpu>
    ....
    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>6291456</memory>
          <cpus num='8'>
            <cpu id='0' socket_id='1' core_id='0' siblings='0-1'/>
            <cpu id='1' socket_id='1' core_id='0' siblings='0-1'/>
            <cpu id='2' socket_id='1' core_id='1' siblings='2-3'/>
            <cpu id='3' socket_id='1' core_id='1' siblings='2-3'/>
            <cpu id='4' socket_id='1' core_id='9' siblings='4-5'/>
            <cpu id='5' socket_id='1' core_id='9' siblings='4-5'/>
            <cpu id='6' socket_id='1' core_id='10' siblings='6-7'/>
            <cpu id='7' socket_id='1' core_id='10' siblings='6-7'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>6881280</memory>
          <cpus num='8'>
            <cpu id='8' socket_id='0' core_id='0' siblings='8-9'/>
            <cpu id='9' socket_id='0' core_id='0' siblings='8-9'/>
            <cpu id='10' socket_id='0' core_id='1' siblings='10-11'/>
            <cpu id='11' socket_id='0' core_id='1' siblings='10-11'/>
            <cpu id='12' socket_id='0' core_id='9' siblings='12-13'/>
            <cpu id='13' socket_id='0' core_id='9' siblings='12-13'/>
            <cpu id='14' socket_id='0' core_id='10' siblings='14-15'/>
            <cpu id='15' socket_id='0' core_id='10' siblings='14-15'/>
          </cpus>
        </cell>
      </cells>
    </topology>
  </host>
  ....

Cleanup the libxl capabilities code to be a bit more extensible,
splitting out the creation of host and guest capabilities.  This
should make it easier to implement additional capabilities in the
future, such as NUMA topology reporting.

As per HACKING, remove some unneeded curly braces in the
libxl driver.

this patch introduce the console api in libxl driver for both pv and
hvm guest.  and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).

Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>