This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.

* tools/virsh.c:
  Remove commands for storage storage pool and a few helpers.
  (vshCommandOptVol, vshCommandOptVolBy).

* tools/virsh-pool.c:
  New file, filled with commands of storage pool group and its
  helpers.

* po/POTFILES.in:
  Add virsh-pool.c

* cfg.mk:
  Skip to check config.h including for virsh-pool.c

This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.

* tools/virsh.c:
  Remove commands for storage storage volume and a few helpers.
  (vshCommandOptVol, vshCommandOptVolBy).

* tools/virsh-volume.c:
  New file, filled with commands of storage volume group and its
  helpers.

* po/POTFILES.in:
  Add virsh-volume.c

* cfg.mk:
  Skip to check config.h including for virsh-volume.c

This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.

* tools/virsh.c:
  - Remove commands for domain group, and one helper
    (vshDomainVcpuStateToString)
  - vshStreamSink is moved before commands's definition for it's
    also used by commands not of domain group, such as volUpload.

* tools/virsh-domain.c:
  - New file, commands for domain group and the one helper are
    moved into it.

* po/POTFILES.in:
  - Add virsh-domain.c

* cfg.mk:
  - Skip to check config.h including for virsh-domain.c

This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.

* tools/virsh.c:
  - Remove commands for domain monitoring group and a few helpers (
    vshDomainIOErrorToString, vshGetDomainDescription,
    vshDomainControlStateToString, vshDomainStateToString) not for
    common use.
  - Remove (incldue "intprops.h").

* tools/virsh-domain-monitor.c:
  - New file, filled with commands of domain monitor group.
  - Add "intprops.h".

* cfg.mk:
  - Skip strcase checking for virsh-domain-monitor.c
  - Skip to check config.h including for virsh-domain-monitor.c

* po/POTFILES.in
  - Add virsh-domain-monitor.c

This will avoid many conflicts if moving the codes for each command
group into separate files in later patches.

Using 'domain' to represent domain name, domain id or uuid all over
the man page, to be consistent with virsh help.

The copyright dates in the manpages haven't been updated in awhile.

Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.

Believe it or not, there's even a BZ for this:

  https://bugzilla.redhat.com/show_bug.cgi?id=819364

Ján Tomko has an accented name.

virNetDevTapCreateInBridgePort: Fix return value to -1
virNetDevTapCreate: Fix comments

No check for conn->uri being NULL in virAuthGetConfigFilePath (valid
state) made the client segfault. This happens for example with these
settings:
 - no virtualbox driver installed (modifies conn->uri)
 - no default URI set (VIRSH_DEFAULT_CONNECT_URI="",
   LIBVIRT_DEFAULT_URI="", uri_default="")
 - auth_sock_rw="sasl"
 - virsh run as root

That are unfortunately the settings with fresh Fedora 17 installation
with VDSM.

The check ought to be enough as conn->uri being NULL is valid in later
code and is handled properly.

WITH_INTERFACE is not defined, it should be WITH_NETCF there to load
the interface driver.

Eric posted patch weeks ago to resolve the problems in the whole
build system, but it's not finalised yet:

https://www.redhat.com/archives/libvir-list/2012-June/msg01299.html

I'm going to simply fix the wrong macro name here so that the
interface driver could loaded, and continue the work on the listing
API for interface driver.

When using libnl, use the variables pkg-config provides in case there are
additional libraries or CFLAGS required to build it. Specifically if
the libnl headers are not directly in /usr/include.

The 'domdisplay' command didn't properly evaluate '--include-password'
option.

libvirt-daemon-driver-XXX should be a dependency only when with_driver_modules
is 1.
libvirt-daemon-driver-libxl should be a dependency only when with_libxl is 1.
libvirt-daemon-driver-lxc should be a dependency only when with_lxc is 1.
libvirt-daemon-driver-qemu should be a dependency only when with_qemu is 1.
libvirt-daemon-driver-uml should be a dependency only when with_uml is 1.
libvirt-daemon-driver-xen should be a dependency only when with_xen is 1.

When running directly from GIT, libvirtd attempts to locate
the directory containing loadable modules. This currently
only works if executing libvirtd with a CWD inside the libvirt
source tree. Switch to locate based on the path to the current
binary instead

some system call and signal will interrupt poll,
making event loop stops and fails to react events and keepalive message
from libvirt.
adding handling EINTR to poll to make it more robust
Signed-off-by: NRoyce Lv <lvroyce@linux.vnet.ibm.com>

We don't expect people to have tools installed to regenerate .png
from .fig by default.  However, since commit 5eb3df8b, several
.fig files were updated without regenerating the .png file, and
as a result, 'make dist' ends up regenerating those five files,
or worse, failing because of missing tools (convert from
ImageMagick).

Additionally, even if the tools are present, the generation of
.png files is nondeterministic (the resulting files contain a
timestamp), which means prior to this patch, running 'make dist'
from two checkouts will end up producing different tarball
contents (two 'make dist' runs will always produce different tar
files, since tarballs also contain timestamps; but unpacking the
tarballs and doing a recursive diff will show if the contents
are unchanged).

After this patch, the timestamps are now up-to-date, and 'make
dist' no longer has anything to do for the .png files.  This gets
us closer to the goal of two checkouts being able to produce the
same tarball.

* docs/libvirt-*.png: Regenerate.

If from a clean GIT checkout 'make -j 8' is run, the ESX
and Hyper-V code will be generated multiple times over.
This is because there are multiple files being generated
from one invocation of the generator script. make does not
realize this and so invokes the generator once per file.
This doesn't matter with serialized builds, but with
parallel builds multiple instances of the generator get
run at once.

make[2]: Entering directory `/home/berrange/src/virt/libvirt/src'
  GEN    util/virkeymaps.h
  GEN    remote/remote_protocol.h
  GEN    remote/remote_client_bodies.h
  GEN    remote/qemu_protocol.h
  GEN    remote/qemu_client_bodies.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi.generated.h
  GEN    esx/esx_vi.generated.c
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  ...snip...
  GEN    hyperv/hyperv_wmi.generated.h
  GEN    libvirt_qemu_probes.h
  GEN    locking/qemu-sanlock.conf
  GEN    hyperv/hyperv_wmi.generated.c
  GEN    rpc/virnetprotocol.h
  GEN    hyperv/hyperv_wmi_classes.generated.typedef
  GEN    hyperv/hyperv_wmi_classes.generated.h
  GEN    hyperv/hyperv_wmi_classes.generated.c
  GEN    rpc/virkeepaliveprotocol.h
  GEN    remote/remote_protocol.c
  GEN    remote/qemu_protocol.c
  GEN    rpc/virkeepaliveprotocol.c
  GEN    rpc/virnetprotocol.c
  GEN    libvirt.def

Prevent this using a timestamp file to control generation,
as was previously done for the python bindings in commit
a7868e01Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch enhances qemuxml2argvtest to deal with semantically incorrect
domain XMLs, that generate errors while parsing.

This patch cleans up macros that invoke the tests and changes boolean
flags to a bit array flag variable.

This patch cleans up coding style breaks some long lines and fixes error
message spelling on various places in domain_conf.c and in the qemu
driver.

The time keeping example was missing quotes which resulted in an error
if you copied and pasted the example into a domain's XML. Additionally
the rest of the examples use single quotes (') instead of double quotes
(") so standardized that.

When the system doesn't have IPv6 available (e.g. not built into the
kernel or the module isn't loaded), you can not create an IPv6 socket.
The test determines earlier on that IPv6 isn't available then goes and
creates a socket. This makes socket creation conditional on IPv6
availability.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
   Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.
Signed-off-by: NAta E Husain Bohra <ata.husain@hotmail.com>

This patch adds support for parsing vmx files with
shared folders enabled.

Update test suite accordingly.

This patch adds support for generating vmx files with
shared folders enabled.

Update test suite accordingly.

Commit ddd6bef4 switched to the ustar format to fix an issue where
'make dist' fails to create a tarball because we have files with
relative names longer than 100 bytes by the time you include a
'libvirt-0.9.13' prefix.  Unfortunately, even with ustar format,
the use of 'tar -ch' tries to convert symlinks to hard links,
also with a name too long (omitting the -h works, but automake
automatically passes -h); such symlinks were added in commit
6dcf98c8, which resulted in 'make dist' breaking again.  The
solution is to rename the offending symlinks to something shorter,
by shortening the entire nodeinfodata naming scheme.

* tests/nodeinfotest.c (mymain): Shorten test names.
(linuxTestNodeInfo): Accommodate new names.
* tests/nodeinfodata/*: Rename files accordingly.

Commit a56c3470 introduced a use of random numbers into seclabel
handling, but failed to initialize the random number generator
in the testsuite.  Also, fail with usual status, not 255.

* tests/seclabeltest.c (main): Initialize randomness.

to retrieve a VEs config parameters as a single string. This will be
used by the upcoming domainGetHostname implementation.

to query the guest's hostname.

to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.

When reporting a system error (VIR_ERR_SYSTEM_ERROR) via
virReportSystemError, we should copy the errno value into
the 'int1' field of the virErrorPtr struct. This allows
callers to detect certain errno conditions & discard the
error

* src/util/virterror.c: Place errno value in int1 field

The previous check for YAJL would have many undesirable
consequences, the most important being that it caused the
capabilities XML to lose all <guest> elements. There is
no user visible feedback as to what is wrong in this respect,
merely a syslog message. The empty capabilities causes
libvirtd to then throw away all guest XML configs that are
stored.

This changes the code so that the check for YAJL is only
performed at the time we attempt to spawn a QEMU process

error: Failed to start domain vm-vnc
error: unsupported configuration: this qemu binary requires libvirt to be compiled with yajl
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of using an O(n) efficiency linked list for storing
MCS labels, use a hash table. Instead of having the list
be global, put it in the SELinux driver private data struct
to ensure uniqueness across different instances of the driver.
This also ensures thread safety when multiple hypervisor
drivers are used in the same libvirtd process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When adding MCS labels, OOM was not being handled correctly.
In addition when reserving an existing label, no check was
made to see if it was already reserved
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The function names in the SELinux driver all start with
SELinux or 'mcs' as a prefix. Sanitize this so that they
all use 'virSecuritySELinux' as the prefix
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>