Convert bootargs from ip=dhcp to ip=on
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add DA9210 DVFS node to the I2C bus and link it to CPU0 for DVFS.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The vin port nodes does not have an address and thus does not need
address-cells or address size-properties.

This is flagged by dtc as follows:
 # make dtbs W=1
 arch/arm/boot/dts/r8a7793-gose.dtb: Warning (avoid_unnecessary_addr_size): /soc/video@e6ef0000/port: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
 arch/arm/boot/dts/r8a7793-gose.dtb: Warning (avoid_unnecessary_addr_size): /soc/video@e6ef1000/port: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Enable the watchdog, so the board can be restarted by a watchdog
timeout.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The internal LVDS encoder now has DT bindings separate from the DU. Port
the device tree over to the new model.

Fixes: c6a27fa4 ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
Fixes: bff8f8c2 ("ARM: dts: r8a7793: add soc node")
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Make it possible to fallback to GPIO for I2C4 on the EXIO-E connector.

This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected board name in subject, fixed aliases, switched
to named GPIOs, fixed pinmux for I2C4]
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

Create a separate bus for HDMI related I2C2 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected board name in subject, fixed aliases, switched
to named GPIOs]
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

Convert the R-Car M2-N SoC from the old "Renesas R-Car Gen2 Clock Pulse
Generator (CPG)", "Renesas CPG DIV6 Clock", and "Renesas CPG Module Stop
(MSTP) Clocks" DT bindings to the new unified "Renesas Clock Pulse
Generator / Module Standby and Software Reset" DT bindings.

This simplifies the DTS files, and allows to add support for reset
control later.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Adds VIN, decoder and connector.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Identical to the setup on Koelsch.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}.
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

The scif_clk device node is already enabled in r8a7793.dtsi, so there is
no need to update its status again.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable i2c6, and add a device node for the da9063 PMIC, with subnodes
for rtc and wdt.  Regulator support is not yet included.

This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Since 16ccaf5b ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Name the Pin Function Controller subnode for QSPI after its device name,
instead of after the spi interface alias.

This avoids conflicts when enabling support for more spi interfaces later,
either here or in a DT overlay.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@5 has a unit name, but no reg property
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Includes regulator and pin assignments.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the gose device tree to use the generic
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.

Changelog text from a similar patch by Sudeep Holla.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSudeep Holla <sudeep.holla@arm.com>

Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable DMA transfer using DVC in r8a7793/gose device tree.

     DMA               DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]

     DMA               DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]

Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable DMA transfer to/from SRC in r8a7793/gose device tree.

     DMA      DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]

     DMA      DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]

Current sound driver is supporting
SSI/SRC random connection.
So, this patch is tring
SSI0 -> SRC2
SSI1 <- SRC3

Based on similar work for the r8a7791/koeslch by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable DMA transfer to/from SSIU in gose/r8a7791 device tree.

     DMA
[MEM] -> [SSIU] -> [SSI]

     DMA
[MEM] <- [SSIU] <- [SSI]

Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable DMA transfer to/from SSI in r8a7793/gose device tree.

     DMA
[MEM] -> [SSI]

     DMA
[MEM] <- [SSI]

Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable sound PIO support in the r8a7793/gose device tree.

Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This patch adds r8a7793 GOSE HDMI video out support.

The r8a7793 GOSE board is similar to r8a7791 Koelsch. For those
boards an on-board HDMI encoder chip provides HDMI video out
and also a LVDS port is available for external LCD panels.

Tested on r8a7793 Gose with HDMI hooked up to a Toshiba TV.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
[simon: rebased; reused existing i2c2 node]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Activate i2c2 bus in r8a7793/gose device tree.

Based on similar work for the r8a7791/koelsch by Wolfram Sang.
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Instantiate the GPIO leds in the gose device tree.

Based on similar work for the koelsch board by Magnus Damm.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Tested-by: NMagnus Damm <damm+renesas@opensource.se>

Instantiate the GPIO keys in the gose device tree.

Based on similar work for the koelsch board by Laurent Pinchart.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Tested-by: NMagnus Damm <damm+renesas@opensource.se>

As of commit e488ca9f ("doc: dt: mtd: partitions: add compatible
property to "partitions" node"), the "partitions" subnode of an SPI
FLASH device node must have a compatible property. The partitions are no
longer detected if it is not present.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable the QSPI controller in the gose device tree.

Based on similar work for the silk board by Vladimir Barinov and
Sergei Shtylyov.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Configure PFC for the already enabled scif and ethernet devices
in the device tree for the gose board.

Based on similar work for the koelsch board by Laurent Pinchart and
Sergei Shtylyov.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Minimal DT description and Makefile entry for the Gose eval board.
Support for console, timer, and Ethernet.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The PHY IRQ line is connected to external IRQ8, not IRQ0. Fix DT
accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable the ethernet controller for the Alt board. Pin muxing entries are
currently left out as r8a7794 pin control support isn't available yet.
We thus rely on the boot loader to configure ethernet pins for now.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>