ARM: dts: r8a779x: Configure PMIC IRQ pinmux

The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

arch/arm/boot/dts/r8a7790-lager.dts

@@ -423,6 +423,8 @@
 	 */
 	i2cpwr: i2c-13 {
 		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		i2c-parent = <&iic3>, <&i2c3>;
 		i2c-bus-name = "i2c-pwr";
 		#address-cells = <1>;
@@ -615,6 +617,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	hsusb_pins: hsusb {
 		groups = "usb0_ovc_vbus";
 		function = "usb0";

arch/arm/boot/dts/r8a7790-stout.dts

@@ -179,6 +179,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -317,7 +322,7 @@
 
 &iic3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -540,6 +540,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -776,6 +781,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 

arch/arm/boot/dts/r8a7791-porter.dts

@@ -228,6 +228,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -373,6 +378,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 

arch/arm/boot/dts/r8a7792-blanche.dts

@@ -234,6 +234,11 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp";
 		function = "du1";
 	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
 };
 
 &rwdt {
@@ -314,6 +319,8 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;

arch/arm/boot/dts/r8a7793-gose.dts

@@ -514,6 +514,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -711,6 +716,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;