- 20 6月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2013 1 次提交
-
-
由 Stefan Roese 提交于
The Allwinner A10 has an ethernet controller that seem to be developped internally by them. The exact feature set of this controller is unknown, since there is no public documentation for this IP, and this driver is mostly the one published by Allwinner that has been heavily cleaned up. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Tested-by: NRichard Genoud <richard.genoud@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
These cards were only available in 8bit format, and in addition they only had AUI and BNC(10-Base2) interfaces (i.e. no RJ-45). In fact, they are so rare, that an internet search on these old cards almost comes up empty, unless the "Micom interlan" name is used. This puts them in the equivalent domain as the 3c501, so there should be no strong opposition to the driver removal, as nobody is seriously using 3.9+ with 8 bit ISA hardware. In doing so, the whole "ethernet/racal" category becomes empty, so we clean up the Makefile/Kconfig and subdir appropriately. Cc: Andreas Mohr <andi@lisas.de> Cc: Jan-Pascal van Best <janpascal@vanbest.org> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 25 9月, 2012 1 次提交
-
-
由 Steven J. Hill 提交于
The MIPSsim platform is no longer supported or used. This patch deletes the Ethernet driver. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2012 1 次提交
-
-
由 Mike Sinkovsky 提交于
Based on original driver from chip manufacturer, but nearly full rewite. Tested and used in production with Blackfin BF531 embedded processor. Signed-off-by: NMike Sinkovsky <msink@permonline.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2012 1 次提交
-
-
由 stigge@antcom.de 提交于
This patch adds an ethernet driver for the LPC32xx ARM SoC. Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2011 1 次提交
-
-
由 Rob Herring 提交于
Add support for the XGMAC 10Gb ethernet device in the Calxeda Highbank SOC. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2011 1 次提交
-
-
由 Cesar Eduardo Barros 提交于
While the SC92031 could be found on fake "Realtek" NICs, it has no relationship to Realtek, and is actually from Silan. Create a new subdirectory for silan and move sc92031 there. Signed-off-by: NCesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2011 22 次提交
-
-
由 Jeff Kirsher 提交于
After the move of the Ethernet drivers into drivers/net/ethernet/ there was some leftover cleanup to do in the Kconfig and Makefile. Removed the 10/100, 1000, and 10GbE Kconfig menus. Removed the out-dated pci-skeleton.c file which was used an example driver. With the current networking features and structure, the file is no longer a good example to use for driver creation. CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Based on feedback from Alan Cox, the acenic driver moved to drivers/net/ethernet/alteon/ and made the necessary Kconfig and Makefile changes. CC: Jes Sorensen <jes@trained-monkey.org> CC: Alan Cox <alan@linux.intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Tilera driver into drivers/net/ethernet/tile and make the necessary Kconfig and Makefile changes. Updated the Kconfig so that the options defualt to y if TILE kernel. CC: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Xircom driver into drivers/net/ethernet/xircom/ and make the necessary Kconfig and Makefile changes. CC: <psheer@icon.co.za> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Renesas driver into drivers/net/ethernet/renesas/ and make the necessary Kconfig and Makefile changes. CC: Yoshihiro Shimoda <yoshihiro.shirmoda.uh@renesas.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the netx driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Jeff Kirsher 提交于
Move the Davicom driver into drivers/net/ethernet/davicom/ and make the necessary Kconfig and Makefile changes. CC: Ben Dooks <ben@simtec.co.uk> CC: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Jeff Kirsher 提交于
Move the Microchip driver into drivers/net/ethernet/microchip/ and make the necessary Kconfig and Makefile changes. CC: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/ and make the necessary Kconfig and Makefile changes. CC: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Avionic driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Dave Ethernet driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Ilya Yanok <yanok@emcraft.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the HP driver into drivers/net/ethernet/hp/ and made the necessary Kconfig and Makefile changes. CC: Jaroslav Kysela <perex@perex.cz> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make the necessary Kconfig and Makefile changes. CC: Ion Badulescu <ionut@badula.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the nForce driver into drivers/net/ethernet/nvidia/ and make the necessary Kconfig and Makefile changes. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Myson driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Donald Becker <becker@scyld.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the RDC driver into drivers/net/ethernet/rdc/ and make the necessary Kconfig and Makefile changes. CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NJamie Iles <jamie@jamieiles.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Jeff Kirsher 提交于
Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and make the necessary Kconfig and Makefile changes. CC: <uclinux-dist-devel@blackfin.uclinux.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NBob Liu <bob.liu@analog.com>
-
由 Jeff Kirsher 提交于
Move the Lantiq driver into drivers/net/ethernet/ and the necessary Kconfig and Makefile changes. CC: John Crispin <blogic@openwrt.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NJohn Crispin <blogic@openwrt.org>
-
由 Jeff Kirsher 提交于
Move the MIPS drivers into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the IDT driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes CC: "IDT Inc." <rischelp@idt.com> CC: Felix Fietkau <nbd@openwrt.org> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the IC Plus driver into drivers/net/ethernet/icplus/ and make the necessary Kconfig and Makefile changes. CC: <craig_rich@sundanceti.com> CC: <sorbica@icplus.com.tw> CC: <jesse@icplus.com.tw> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 8月, 2011 9 次提交
-
-
由 Jeff Kirsher 提交于
Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and make the necessary Kconfig and Makefile changes. CC: John Williams <john.williams@petalogix.com> CC: "David H. Lynch Jr." <dhlii@dlasys.net> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the JME driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Cavium driver to drivers/net/ethernet/octeon/ and make the necessary Kconfig and Makefile changes. CC: David Daney <david.daney@cavium.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NDavid Daney <david.daney@cavium.com>
-
由 Jeff Kirsher 提交于
Move the packet engine drivers to drivers/net/ethernet/packetengines/ and the necessary Kconfig and Makefile changes. CC: Donald Becker <becker@scyld.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram <srk@ti.com> CC: Vinay Hegde <vinay.hegde@ti.com> CC: Cyril Chemparathy <cyril@ti.com> CC: Samuel Chessman <chessman@tux.org> CC: <torben.mathiasen@compaq.com> CC: Eugene Konev <ejka@imfi.kspu.ru> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the s6gmac driver to drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Oskar Schirmer <os@emlix.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Tundra driver to drivers/net/ethernet/tundra/ and make the necessary Kocnfig and Makefile changes. CC: Kong Lai <kong.lai@tundra.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Nuvoton driver into drivers/net/ethernet/nuvoton/ and make the necessary Kconfig and Makefile changes. CC: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/ and make the necessary Kconfig and Makefile changes CC: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-