- 20 6月, 2013 14 次提交
-
-
由 Ben Hutchings 提交于
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Also, cleanup bond_alb_handle_active_change() from 2 identical ifs. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
be_find_vfs() is no longer needed as the common PCI calls provide the same functionality. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Check next packet availability by validating that HW has finished CQE placement. This saves latency of another dma transaction performed to update SB indexes. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Adds ndo_ll_poll method and locking for FPs between LL and the napi. When receiving a packet we use skb_mark_ll to record the napi it came from. Add each napi to the napi_hash right after netif_napi_add(). Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Add basic support for LLS. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The only R8A7740 specific #ifdef hindering ARM multiplatform build is left in sh_eth_rx(): it covers the code shifting Rx buffer descriptor word 0 by 16. Get rid of the #ifdef by adding 'shift_rd0' field to the 'struct sh_eth_cpu_data', making the shift dependent on it, and setting it to 1 for the R8A7740 case... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
Fix the comment to 'enum TD_STS_BIT', reformat the values, and add a couple of values missing before (though unused by the driver). Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
For SH7724 'eesipr_value' field initializer includes DMAC_M_RFRMER & DMAC_M_ECI bits which are already contained in 0x01ff009f -- remove them. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The 'tx_error_check' field of 'struct sh_eth_cpu_data' is write-only, so remove it along with the DEFAULT_TX_ERROR_CHECK macro. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver hasn't used NAPI so far; implement its support at last... The patch was tested on Renesas R8A77781 BOCK-W board. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
sh_eth_interrupt() uses the same Rx interrupt mask twice to check the interrupt status register -- #define EESR_RX_CHECK and use it instead. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 6月, 2013 3 次提交
-
-
由 stephen hemminger 提交于
The check introduced by: commit 26a41ae6 Author: stephen hemminger <stephen@networkplumber.org> Date: Mon Jun 17 12:09:58 2013 -0700 vxlan: only migrate dynamic FDB entries was not correct because it is checking flag about type of FDB entry, rather than the state (dynamic versus static). The confusion arises because vxlan is reusing values from bridge, and bridge is reusing values from neighbour table, and easy to get lost in translation. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Introduce by commit 0ae99b5f (bcm63xx_enet: split DMA channel register accesses) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The usb_8dev hardware has problems on some xhci USB hosts. The driver fails to read the firmware revision in the probe function. This leads to the following Oops: [ 3356.635912] kernel BUG at net/core/dev.c:5701! The driver tries to free the netdev, which has already been registered, without unregistering it. This patch fixes the problem by unregistering the netdev in the error path. Reported-by: NMichael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: NBernd Krumboeck <krumboeck@universalnet.at> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 18 6月, 2013 14 次提交
-
-
由 Isaku Yamahata 提交于
The change set of 7a884dc "[SK_BUFF]: Convert skb->tail to sk_buff_data_t" converted skb->tail from pointer into sk_buff_data_t. Thus skb->tail is not always pointer, the area pointed by skb->tail should be accessed via skb_tail_pointer(). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: NSimon Horman <horms@verge.net.au> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Isaku Yamahata 提交于
The change set of 4305b541, "[SK_BUFF]: Convert skb->end to sk_buff_data_t" converted skb->end from pointer type to sk_buff_data_t. The pointed value should be accessed via skb_end_pointer(). Since arm arch doesn't define NET_SKBUFF_DATA_USES_OFFSET, skb->end is effectively pointer. So it doesn't cause a real problem. But this patch is good for consistency. Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Isaku Yamahata 提交于
The change set of 4305b541 "[SK_BUFF]: Convert skb->end to sk_buff_data_t" converted skb->end from pointer to sk_buff_data_t. The pointed value should be accessed via skb_end_pointer(). Since arm or ppc arch doesn't define NET_SKBUFF_DATA_USES_OFFSET, skb->end is effectively pointer. So it doesn't cause a real problem. But this patch is good for consistency. Found by inspection. Compile test only. Cc: Simon Horman <horms@verge.net.au> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Isaku Yamahata 提交于
The change set of 1a37e412, "net: Use 16bits for *_headers fields of struct skbuff" converted from sk_buff_data_t into 16bit integer. So skb->tail needs to be converted to skb_tail_pointer(skb). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Isaku Yamahata 提交于
The change set of 27a884dc, "[SK_BUFF]: Convert skb->tail to sk_buff_data_t" converted skb->tail from pointer into sk_buff_data_t. It missed skb->tail in drivers/atm/ambassador.c. This patch converts skb->tail into skb_tail_pointer(skb). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Healy 提交于
Add ethtool operation to restart autonegotiation via the PHY. Tested on i.MX28EVK. Signed-off-by: NChris Healy <cphealy@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
alb_set_slave_mac_addr() sets the mac address in alb mode via dev_set_mac_address(), which might sleep. It's called from alb_handle_addr_collision_on_attach() in atomic context (under read_lock(bond->lock)), thus triggering a bug. Fix this by moving the lock inside alb_handle_addr_collision_on_attach(). v1->v2: As Nikolay Aleksandrov noticed, we can drop the bond->lock completely. Also, use bond_slave_has_mac(), when possible. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Siewior 提交于
after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The current tg3 code assumes the pci_error_handlers to be always called in sequence. In particular, during ->error_detected(), NAPI is disabled and the device is shutdown. The device is later reset and NAPI re-enabled in ->slot_reset() and ->resume(). In EEH, if more than 6 errors are detected in a hour, only ->error_detected() will be called. This will leave the driver in an inconsistent state as NAPI is disabled but netif_running state is still true. When the device is later closed, we'll try to disable NAPI again and it will loop forever. We fix this by closing the device if we encounter any error conditions during the normal sequence of the pci_error_handlers. v2: Remove the changes in tg3_io_resume() based on Benjamin Poirier's feedback. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
If skb_clone fails if out of memory then just skip the fanout. Problem was introduced in 3.10 with: commit 6681712d Author: David Stevens <dlstevens@us.ibm.com> Date: Fri Mar 15 04:35:51 2013 +0000 vxlan: generalize forwarding tables Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Only migrate dynamic forwarding table entries, don't modify static entries. If packet received from incorrect source IP address assume it is an imposter and drop it. This patch applies only to -net, a different patch would be needed for earlier kernels since the NTF_SELF flag was introduced with 3.10. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
It is possible for a packet to arrive during vxlan_stop(), and have a dynamic entry created. Close this by checking if device is up. CPU1 CPU2 vxlan_stop vxlan_flush hash_lock acquired vxlan_encap_recv vxlan_snoop waiting for hash_lock hash_lock relased vxlan_flush done hash_lock acquired vxlan_fdb_create This is a day-one bug in vxlan goes back to 3.7. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 6月, 2013 1 次提交
-
-
由 Al Viro 提交于
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 6月, 2013 8 次提交
-
-
由 Tomas Winkler 提交于
We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[<ffffffff81334e5d>] [<ffffffff81334e5d>] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [<ffffffff8133502d>] device_unregister+0x1d/0x60 [ 404.253787] [<ffffffffa02a4749>] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [<ffffffffa02a4ba1>] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [<ffffffffa029c2dd>] mei_stop+0x3d/0x90 [mei] [ 404.253830] [<ffffffffa046e220>] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [<ffffffff81278f37>] pci_device_remove+0x37/0xb0 [ 404.253855] [<ffffffff81337c68>] __device_release_driver+0x98/0x100 [ 404.253865] [<ffffffff81337d80>] driver_detach+0xb0/0xc0 [ 404.253876] [<ffffffff81336b4f>] bus_remove_driver+0x8f/0x120 [ 404.253891] [<ffffffff81075990>] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [<ffffffff81338a48>] driver_unregister+0x58/0x90 [ 404.253913] [<ffffffff8127906b>] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [<ffffffffa046f244>] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [<ffffffff810a50d8>] SyS_delete_module+0x198/0x2b0 [ 404.253949] [<ffffffff814850d9>] ? do_page_fault+0x9/0x10 [ 404.253961] [<ffffffff81489692>] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [<ffffffff81334e5d>] device_del+0x1d/0x1d0 Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Samuel Ortiz 提交于
Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rony Efraim 提交于
Add support to change the link state of VF (vPort) Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Poirier 提交于
fixes a race condition between concurrent initializations of netiucv devices that try to use the same name. sysfs: cannot create duplicate filename '/devices/iucv/netiucv2' [...] Call Trace: ([<00000000002edea4>] sysfs_add_one+0xb0/0xdc) [<00000000002eecd4>] create_dir+0x80/0xfc [<00000000002eee38>] sysfs_create_dir+0xe8/0x118 [<00000000003835a8>] kobject_add_internal+0x120/0x2d0 [<00000000003839d6>] kobject_add+0x62/0x9c [<00000000003d9564>] device_add+0xcc/0x510 [<000003e00212c7b4>] netiucv_register_device+0xc0/0x1ec [netiucv] Signed-off-by: NBenjamin Poirier <bpoirier@suse.de> Tested-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds support for the Broadcom BCM6345 SoC Ethernet. BCM6345 has a slightly different and older DMA engine which requires the following modifications: - the width of the DMA channels on BCM6345 is 64 bytes vs 16 bytes, which means that the helpers enet_dma{c,s} need to account for this channel width and we can no longer use macros - BCM6345 DMA engine does not have any internal SRAM for transfering buffers - BCM6345 buffer allocation and flow control is not per-channel but global (done in RSET_ENETDMA) - the DMA engine bits are right-shifted by 3 compared to other DMA generations - the DMA enable/interrupt masks are a little different (we need to enabled more bits for 6345) - some register have the same meaning but are offsetted in the ENET_DMAC space so a lookup table is required to return the proper offset The MAC itself is identical and requires no modifications to work. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Herrenschmidt 提交于
The OF code uses irqsafe locks everywhere except in a handful of functions for no obvious reasons. Since the conversion from the old rwlocks, this now triggers lockdep warnings when used at interrupt time. At least one driver (ibmvscsi) seems to be doing that from softirq context. This converts the few non-irqsafe locks into irqsafe ones, making them consistent with the rest of the code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-