提交 49220505 编写于 作者: S Stefan Roese 提交者: David S. Miller

net: Add EMAC ethernet driver found on Allwinner A10 SoC's

The Allwinner A10 has an ethernet controller that seem to be developped
internally by them.

The exact feature set of this controller is unknown, since there is no
public documentation for this IP, and this driver is mostly the one
published by Allwinner that has been heavily cleaned up.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 2cc70ba4
* Allwinner EMAC ethernet controller
Required properties:
- compatible: should be "allwinner,sun4i-emac".
- reg: address and length of the register set for the device.
- interrupts: interrupt for the device
- phy: A phandle to a phy node defining the PHY address (as the reg
property, a single integer).
- clocks: A phandle to the reference clock for this device
Optional properties:
- (local-)mac-address: mac address to be used by this driver
Example:
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
phy = <&phy0>;
};
......@@ -20,6 +20,7 @@ config SUNGEM_PHY
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
source "drivers/net/ethernet/allwinner/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
obj-$(CONFIG_GRETH) += aeroflex/
obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
......
#
# Allwinner device configuration
#
config NET_VENDOR_ALLWINNER
bool "Allwinner devices"
default y
depends on ARCH_SUNXI
---help---
If you have a network (Ethernet) card belonging to this
class, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly
affect the kernel: saying N will just cause the configurator
to skip all the questions about Allwinner cards. If you say Y,
you will be asked for your specific card in the following
questions.
if NET_VENDOR_ALLWINNER
config SUN4I_EMAC
tristate "Allwinner A10 EMAC support"
depends on ARCH_SUNXI
depends on OF
select CRC32
select NET_CORE
select MII
select PHYLIB
---help---
Support for Allwinner A10 EMAC ethernet driver.
To compile this driver as a module, choose M here. The module
will be called sun4i-emac.
endif # NET_VENDOR_ALLWINNER
#
# Makefile for the Allwinner device drivers.
#
obj-$(CONFIG_SUN4I_EMAC) += sun4i-emac.o
此差异已折叠。
/*
* Allwinner EMAC Fast Ethernet driver for Linux.
*
* Copyright 2012 Stefan Roese <sr@denx.de>
* Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
*
* Based on the Linux driver provided by Allwinner:
* Copyright (C) 1997 Sten Wang
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _SUN4I_EMAC_H_
#define _SUN4I_EMAC_H_
#define EMAC_CTL_REG (0x00)
#define EMAC_CTL_RESET (1 << 0)
#define EMAC_CTL_TX_EN (1 << 1)
#define EMAC_CTL_RX_EN (1 << 2)
#define EMAC_TX_MODE_REG (0x04)
#define EMAC_TX_MODE_ABORTED_FRAME_EN (1 << 0)
#define EMAC_TX_MODE_DMA_EN (1 << 1)
#define EMAC_TX_FLOW_REG (0x08)
#define EMAC_TX_CTL0_REG (0x0c)
#define EMAC_TX_CTL1_REG (0x10)
#define EMAC_TX_INS_REG (0x14)
#define EMAC_TX_PL0_REG (0x18)
#define EMAC_TX_PL1_REG (0x1c)
#define EMAC_TX_STA_REG (0x20)
#define EMAC_TX_IO_DATA_REG (0x24)
#define EMAC_TX_IO_DATA1_REG (0x28)
#define EMAC_TX_TSVL0_REG (0x2c)
#define EMAC_TX_TSVH0_REG (0x30)
#define EMAC_TX_TSVL1_REG (0x34)
#define EMAC_TX_TSVH1_REG (0x38)
#define EMAC_RX_CTL_REG (0x3c)
#define EMAC_RX_CTL_AUTO_DRQ_EN (1 << 1)
#define EMAC_RX_CTL_DMA_EN (1 << 2)
#define EMAC_RX_CTL_PASS_ALL_EN (1 << 4)
#define EMAC_RX_CTL_PASS_CTL_EN (1 << 5)
#define EMAC_RX_CTL_PASS_CRC_ERR_EN (1 << 6)
#define EMAC_RX_CTL_PASS_LEN_ERR_EN (1 << 7)
#define EMAC_RX_CTL_PASS_LEN_OOR_EN (1 << 8)
#define EMAC_RX_CTL_ACCEPT_UNICAST_EN (1 << 16)
#define EMAC_RX_CTL_DA_FILTER_EN (1 << 17)
#define EMAC_RX_CTL_ACCEPT_MULTICAST_EN (1 << 20)
#define EMAC_RX_CTL_HASH_FILTER_EN (1 << 21)
#define EMAC_RX_CTL_ACCEPT_BROADCAST_EN (1 << 22)
#define EMAC_RX_CTL_SA_FILTER_EN (1 << 24)
#define EMAC_RX_CTL_SA_FILTER_INVERT_EN (1 << 25)
#define EMAC_RX_HASH0_REG (0x40)
#define EMAC_RX_HASH1_REG (0x44)
#define EMAC_RX_STA_REG (0x48)
#define EMAC_RX_IO_DATA_REG (0x4c)
#define EMAC_RX_IO_DATA_LEN(x) (x & 0xffff)
#define EMAC_RX_IO_DATA_STATUS(x) ((x >> 16) & 0xffff)
#define EMAC_RX_IO_DATA_STATUS_CRC_ERR (1 << 4)
#define EMAC_RX_IO_DATA_STATUS_LEN_ERR (3 << 5)
#define EMAC_RX_IO_DATA_STATUS_OK (1 << 7)
#define EMAC_RX_FBC_REG (0x50)
#define EMAC_INT_CTL_REG (0x54)
#define EMAC_INT_STA_REG (0x58)
#define EMAC_MAC_CTL0_REG (0x5c)
#define EMAC_MAC_CTL0_RX_FLOW_CTL_EN (1 << 2)
#define EMAC_MAC_CTL0_TX_FLOW_CTL_EN (1 << 3)
#define EMAC_MAC_CTL0_SOFT_RESET (1 << 15)
#define EMAC_MAC_CTL1_REG (0x60)
#define EMAC_MAC_CTL1_DUPLEX_EN (1 << 0)
#define EMAC_MAC_CTL1_LEN_CHECK_EN (1 << 1)
#define EMAC_MAC_CTL1_HUGE_FRAME_EN (1 << 2)
#define EMAC_MAC_CTL1_DELAYED_CRC_EN (1 << 3)
#define EMAC_MAC_CTL1_CRC_EN (1 << 4)
#define EMAC_MAC_CTL1_PAD_EN (1 << 5)
#define EMAC_MAC_CTL1_PAD_CRC_EN (1 << 6)
#define EMAC_MAC_CTL1_AD_SHORT_FRAME_EN (1 << 7)
#define EMAC_MAC_CTL1_BACKOFF_DIS (1 << 12)
#define EMAC_MAC_IPGT_REG (0x64)
#define EMAC_MAC_IPGT_HALF_DUPLEX (0x12)
#define EMAC_MAC_IPGT_FULL_DUPLEX (0x15)
#define EMAC_MAC_IPGR_REG (0x68)
#define EMAC_MAC_IPGR_IPG1 (0x0c)
#define EMAC_MAC_IPGR_IPG2 (0x12)
#define EMAC_MAC_CLRT_REG (0x6c)
#define EMAC_MAC_CLRT_COLLISION_WINDOW (0x37)
#define EMAC_MAC_CLRT_RM (0x0f)
#define EMAC_MAC_MAXF_REG (0x70)
#define EMAC_MAC_SUPP_REG (0x74)
#define EMAC_MAC_TEST_REG (0x78)
#define EMAC_MAC_MCFG_REG (0x7c)
#define EMAC_MAC_A0_REG (0x98)
#define EMAC_MAC_A1_REG (0x9c)
#define EMAC_MAC_A2_REG (0xa0)
#define EMAC_SAFX_L_REG0 (0xa4)
#define EMAC_SAFX_H_REG0 (0xa8)
#define EMAC_SAFX_L_REG1 (0xac)
#define EMAC_SAFX_H_REG1 (0xb0)
#define EMAC_SAFX_L_REG2 (0xb4)
#define EMAC_SAFX_H_REG2 (0xb8)
#define EMAC_SAFX_L_REG3 (0xbc)
#define EMAC_SAFX_H_REG3 (0xc0)
#define EMAC_PHY_DUPLEX (1 << 8)
#define EMAC_EEPROM_MAGIC (0x444d394b)
#define EMAC_UNDOCUMENTED_MAGIC (0x0143414d)
#endif /* _SUN4I_EMAC_H_ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册