Wave limiting can be use to load balance high priority
compute jobs along with gfx jobs. When enabled, this will reserve
~75% of waves for compute jobs.

We do not need this from gfx10 onwards because >=gfx10 has
asynchronous compute tunneling to replace wave limit requirement.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch consist of below related changes:

1 Rename ring->priority to ring->hw_prio.
2 Assign correct hardware ring priority.
3 Remove ring->priority_mutex as ring priority remains unchanged
  after initialization.
4 Remove unused ring->num_jobs.

v3: remove ring->num_jobs.
v2: remove ring->priority_mutex.

Fixes: 33abcb1f ("drm/amdgpu: set compute queue priority at mqd_init")
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The dm struct is only being used if DCN config is defined and this
causes a unused variable warning if DCN option is not set.

[How]
Remove the compile flag so the variable is used (there also seems to be
a duplicate guard due to a bad rebase) so remove the outer guard to fix
the warning.

Fixes this warning
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c: In function 'dm_set_vblank':
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:5380:33: warning: unused variable 'dm' [-Wunused-variable]

Fixes: 98ab5f35 ("drm/amd/display: Fix deadlock during gpu reset v3")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 4c3a3292.

Bhawan's fix is better (less ifdefs), so revert this and apply Bhawan's.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After all users of the 'dm' warnings got hidden in an #ifdef,
the compiler started warning about it being unused:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable]

Add another such #ifdef.

Fixes: 98ab5f35 ("drm/amd/display: Fix deadlock during gpu reset v3")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org

If the user passes a "level" value which is higher than 31 then that
leads to shift wrapping.  The undefined behavior will lead to a
syzkaller stack dump.

Fixes: 5632708f ("drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove unneeded variable: "pattern".
Signed-off-by: NBernard Zhao <bernard@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check GFX DPM and PG bit before enable GFXOFF on Vangogh
smu post init.
Signed-off-by: NJinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Better handling of dummy p-state table
- Workaround for some legacy DP-VGA dongles
- Add Freesync HDMI support to DMCU
- Enable "trigger_hotplug" debugfs on all outputs
- fix initial bounding box values for dcn3.02
- implement support for DID2.0 dsc passthrough
- fix calculation for the pwl backlight curve
- Fix multiple memory leaks
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Overlay won't move to a new positon if viewport size is smaller than
what can be handled. It'd either disappear or stay at the old
position. This condition is for example hit if overlay is moved too
much outside of left or top edge of the screen, but it applies to
any non-cursor plane type.

[how]
Reject this contidion at validation time. This gives the calling
level a chance to handle this gracefully and avoid inconsistent
behaivor.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some scenarios where we use a UCLK frequency in between dummy p-state table
entries result in a p-state hang, due to the table not having a close
enough match, so the default DPM0 latency is used, which can be too long to
support dummy p-state switching in these scenarios.

[How]
 - old: match if current freq is within +- margin of table entry
 - new: find largest table entry that is lower than current freq + margin
   - lower than DPM0 will still use DPM0
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA
dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and
this leads to the maximum resolution 1920*1080 cannot be obtained from EDID.

[How]
Provide a workaround for some legacy DP-VGA dongles with a longer aux delay.
Signed-off-by: NTaimur Hassan <syed.hassan@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.

[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.

[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Remove force_ignore_link_settings debug option as it is no longer used.
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Adding support for Freesync HDMI to DC and DMCU

[How]
Create DC interface and implementation on top of DMCU to support
parsing CEA blocks in DMCU.
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only.
New IGT tests need this entry to test other outputs.

[How]
Enable this debugfs entry on all types of connectors
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The conditions for whether we used cached vs non-cached inbox1 depend
on a version check that mismatches what the shared helpers in dmub20
implement.

[How]
Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Initial bounding box values are updated in dcn30_update_bw_bounding_box
 but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and
 dcn3_02_ip

[How]
Add dcn302_update_bw_bounding_box and
 dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses
 dcn3_02_soc and dcn3_02_ip.
Use sr_exit_time_us, sr_enter_plus_exit_time_us,
 from dcn30 on dcn302 to fix flicker on eDP.
 Also use dram_clock_change_latency_us from dcn30.
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some panels contain active converters (e.g. DP to MIPI) which only support
restricted DSC configurations.  DID2.0 adds support for such displays to
explicitly define per timing BPP restrictions on DSC.  Ignoring these
restrictions leads to blackscreen.

[How]
Add parsing in DID2.0 parser to get this bpp info.
Add support in DSC module to constraint target bpp based
on this info.
Signed-off-by: NJun Lei <jun.lei@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.

[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.

[how]
Before acquiring dsc to stream resources, first remove it.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NEryk Brol <Eryk.Brol@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit b24bdc37.
It caused memory leak after S3 on 4K HDMI displays.
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The PWL backlight curve is used by the firmware to convert between
brightness and linear PWM value.
Driver has a backlight LUT, but the firmware holds a PWL curve and
interpolates between points.

The calculations are incorrect leading to slightly off backlight values
being programmed.

[How]
Fix the PWL backlight curve threshold/offset calculations
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NJosip Pavic <Josip.Pavic@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This DC update brings improvements in multiple areas. In summary, we highlight:
 - Fix display detection on HDMI ComboPHY
 - Drop SOC bounding box hookup
 - Fix DPCD values
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Add field for passing line time for a frame
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.

[HOW]
Initialize more clock sources.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
In HDCP update stream config interface, some variables are named as
xxx_supported, but in fact the variable indicates whether or not xxx_enabled.
Correct the naming so it is less confusing to read the code.
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In seamless boot without a flip case, the flag power_gated didn't
get cleared when resetting path mode because the plane_state is null.
The following sequence will cause this issue:
    1. OS call set mode to clone/extended
    2. Reset path mode to remove edp

[How]
Set power gated default to true in seamless boot pipe
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.

Recreating the context can lead to mismatch between new context and the
current context

For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.

[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Safeguarding as pointer may be null in diagnostic environment
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Reviewed-by: NSung Lee <Sung.Lee@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds
the required initialization at dc_construct().
Signed-off-by: NBrendan Steve Leder <brendanSteve.Leder@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.

[How]
Update values to match the spec.
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
There aren't any ASIC where we use these binaries and they aren't
useful for future use since it's inconvenient to extend and maintain
these structures.

[How]
Drop the support from DM and DC for now.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Acked-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NHersen Wu <hersenxs.wu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some newer APUs can scanout directly from GTT, that saves us from
allocating another bounce buffer in VRAM and enables freesync in such
configurations.

Without this patch creating a framebuffer from the imported BO will
fail and userspace will fall back to a copy.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NShashank Sharma <shashank.sharma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to remove some useless code for vangogh.
In the earlier code, vangogh can't finish all the sequence of
smu late init. But now vangogh has one stable work state,so
remove the useless code.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NXiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to fill in the data member of v2 gpu metrics
table for vangogh.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Vangogh:
The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation.
The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation.
Signed-off-by: Nchen gong <curry.gong@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>