Kconfig 30.8 KB
Newer Older
C
Catalin Marinas 已提交
1 2
config ARM64
	def_bool y
3
	select ACPI_CCA_REQUIRED if ACPI
4
	select ACPI_GENERIC_GSI if ACPI
5
	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
6
	select ACPI_MCFG if ACPI
7
	select ARCH_HAS_DEVMEM_IS_ALLOWED
8
	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
C
Catalin Marinas 已提交
9
	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
10
	select ARCH_HAS_ELF_RANDOMIZE
11
	select ARCH_HAS_GCOV_PROFILE_ALL
12
	select ARCH_HAS_KCOV
13
	select ARCH_HAS_SG_CHAIN
14
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
15
	select ARCH_USE_CMPXCHG_LOCKREF
16
	select ARCH_SUPPORTS_ATOMIC_RMW
17
	select ARCH_SUPPORTS_NUMA_BALANCING
18
	select ARCH_WANT_OPTIONAL_GPIOLIB
19
	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
20
	select ARCH_WANT_FRAME_POINTERS
21
	select ARCH_HAS_UBSAN_SANITIZE_ALL
22
	select ARM_AMBA
23
	select ARM_ARCH_TIMER
24
	select ARM_GIC
A
AKASHI Takahiro 已提交
25
	select AUDIT_ARCH_COMPAT_GENERIC
26
	select ARM_GIC_V2M if PCI
27
	select ARM_GIC_V3
28
	select ARM_GIC_V3_ITS if PCI
29
	select ARM_PSCI_FW
30
	select BUILDTIME_EXTABLE_SORT
31
	select CLONE_BACKWARDS
32
	select COMMON_CLK
33
	select CPU_PM if (SUSPEND || CPU_IDLE)
34
	select DCACHE_WORD_ACCESS
35
	select EDAC_SUPPORT
36
	select FRAME_POINTER
37
	select GENERIC_ALLOCATOR
C
Catalin Marinas 已提交
38
	select GENERIC_CLOCKEVENTS
39
	select GENERIC_CLOCKEVENTS_BROADCAST
40
	select GENERIC_CPU_AUTOPROBE
M
Mark Salter 已提交
41
	select GENERIC_EARLY_IOREMAP
L
Leo Yan 已提交
42
	select GENERIC_IDLE_POLL_SETUP
C
Catalin Marinas 已提交
43 44
	select GENERIC_IRQ_PROBE
	select GENERIC_IRQ_SHOW
45
	select GENERIC_IRQ_SHOW_LEVEL
A
Arnd Bergmann 已提交
46
	select GENERIC_PCI_IOMAP
47
	select GENERIC_SCHED_CLOCK
C
Catalin Marinas 已提交
48
	select GENERIC_SMP_IDLE_THREAD
49 50
	select GENERIC_STRNCPY_FROM_USER
	select GENERIC_STRNLEN_USER
C
Catalin Marinas 已提交
51
	select GENERIC_TIME_VSYSCALL
52
	select HANDLE_DOMAIN_IRQ
C
Catalin Marinas 已提交
53
	select HARDIRQS_SW_RESEND
54
	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
A
AKASHI Takahiro 已提交
55
	select HAVE_ARCH_AUDITSYSCALL
56
	select HAVE_ARCH_BITREVERSE
57
	select HAVE_ARCH_HARDENED_USERCOPY
58
	select HAVE_ARCH_HUGE_VMAP
59
	select HAVE_ARCH_JUMP_LABEL
60
	select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
V
Vijaya Kumar K 已提交
61
	select HAVE_ARCH_KGDB
62 63
	select HAVE_ARCH_MMAP_RND_BITS
	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
A
AKASHI Takahiro 已提交
64
	select HAVE_ARCH_SECCOMP_FILTER
C
Catalin Marinas 已提交
65
	select HAVE_ARCH_TRACEHOOK
66 67
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
	select HAVE_ARM_SMCCC
68
	select HAVE_EBPF_JIT
69
	select HAVE_C_RECORDMCOUNT
70
	select HAVE_CC_STACKPROTECTOR
71
	select HAVE_CMPXCHG_DOUBLE
72
	select HAVE_CMPXCHG_LOCAL
73
	select HAVE_CONTEXT_TRACKING
74
	select HAVE_DEBUG_BUGVERBOSE
75
	select HAVE_DEBUG_KMEMLEAK
C
Catalin Marinas 已提交
76
	select HAVE_DMA_API_DEBUG
L
Laura Abbott 已提交
77
	select HAVE_DMA_CONTIGUOUS
78
	select HAVE_DYNAMIC_FTRACE
79
	select HAVE_EFFICIENT_UNALIGNED_ACCESS
80
	select HAVE_FTRACE_MCOUNT_RECORD
A
AKASHI Takahiro 已提交
81 82
	select HAVE_FUNCTION_TRACER
	select HAVE_FUNCTION_GRAPH_TRACER
E
Emese Revfy 已提交
83
	select HAVE_GCC_PLUGINS
C
Catalin Marinas 已提交
84 85
	select HAVE_GENERIC_DMA_COHERENT
	select HAVE_HW_BREAKPOINT if PERF_EVENTS
86
	select HAVE_IRQ_TIME_ACCOUNTING
C
Catalin Marinas 已提交
87
	select HAVE_MEMBLOCK
88
	select HAVE_MEMBLOCK_NODE_MAP if NUMA
89
	select HAVE_PATA_PLATFORM
C
Catalin Marinas 已提交
90
	select HAVE_PERF_EVENTS
91 92
	select HAVE_PERF_REGS
	select HAVE_PERF_USER_STACK_DUMP
93
	select HAVE_REGS_AND_STACK_ACCESS_API
94
	select HAVE_RCU_TABLE_FREE
95
	select HAVE_SYSCALL_TRACEPOINTS
96
	select HAVE_KPROBES
97
	select HAVE_KRETPROBES if HAVE_KPROBES
R
Robin Murphy 已提交
98
	select IOMMU_DMA if IOMMU_SUPPORT
C
Catalin Marinas 已提交
99
	select IRQ_DOMAIN
100
	select IRQ_FORCED_THREADING
101
	select MODULES_USE_ELF_RELA
C
Catalin Marinas 已提交
102 103 104
	select NO_BOOTMEM
	select OF
	select OF_EARLY_FLATTREE
105
	select OF_NUMA if NUMA && OF
106
	select OF_RESERVED_MEM
107
	select PCI_ECAM if ACPI
C
Catalin Marinas 已提交
108
	select PERF_USE_VMALLOC
109 110
	select POWER_RESET
	select POWER_SUPPLY
C
Catalin Marinas 已提交
111
	select SPARSE_IRQ
112
	select SYSCTL_EXCEPTION_TRACE
C
Catalin Marinas 已提交
113 114 115 116 117 118 119 120 121 122 123 124
	help
	  ARM 64-bit (AArch64) Linux support.

config 64BIT
	def_bool y

config ARCH_PHYS_ADDR_T_64BIT
	def_bool y

config MMU
	def_bool y

125 126 127 128 129 130 131 132 133 134 135 136
config ARM64_PAGE_SHIFT
	int
	default 16 if ARM64_64K_PAGES
	default 14 if ARM64_16K_PAGES
	default 12

config ARM64_CONT_SHIFT
	int
	default 5 if ARM64_64K_PAGES
	default 7 if ARM64_16K_PAGES
	default 4

137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163
config ARCH_MMAP_RND_BITS_MIN
       default 14 if ARM64_64K_PAGES
       default 16 if ARM64_16K_PAGES
       default 18

# max bits determined by the following formula:
#  VA_BITS - PAGE_SHIFT - 3
config ARCH_MMAP_RND_BITS_MAX
       default 19 if ARM64_VA_BITS=36
       default 24 if ARM64_VA_BITS=39
       default 27 if ARM64_VA_BITS=42
       default 30 if ARM64_VA_BITS=47
       default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
       default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
       default 33 if ARM64_VA_BITS=48
       default 14 if ARM64_64K_PAGES
       default 16 if ARM64_16K_PAGES
       default 18

config ARCH_MMAP_RND_COMPAT_BITS_MIN
       default 7 if ARM64_64K_PAGES
       default 9 if ARM64_16K_PAGES
       default 11

config ARCH_MMAP_RND_COMPAT_BITS_MAX
       default 16

164
config NO_IOPORT_MAP
165
	def_bool y if !PCI
C
Catalin Marinas 已提交
166 167 168 169

config STACKTRACE_SUPPORT
	def_bool y

170 171 172 173
config ILLEGAL_POINTER_VALUE
	hex
	default 0xdead000000000000

C
Catalin Marinas 已提交
174 175 176 177 178 179
config LOCKDEP_SUPPORT
	def_bool y

config TRACE_IRQFLAGS_SUPPORT
	def_bool y

180
config RWSEM_XCHGADD_ALGORITHM
C
Catalin Marinas 已提交
181 182
	def_bool y

183 184 185 186 187 188 189 190
config GENERIC_BUG
	def_bool y
	depends on BUG

config GENERIC_BUG_RELATIVE_POINTERS
	def_bool y
	depends on GENERIC_BUG

C
Catalin Marinas 已提交
191 192 193 194 195 196 197 198 199
config GENERIC_HWEIGHT
	def_bool y

config GENERIC_CSUM
        def_bool y

config GENERIC_CALIBRATE_DELAY
	def_bool y

200
config ZONE_DMA
C
Catalin Marinas 已提交
201 202
	def_bool y

S
Steve Capper 已提交
203 204 205
config HAVE_GENERIC_RCU_GUP
	def_bool y

C
Catalin Marinas 已提交
206 207 208 209 210 211 212 213 214
config ARCH_DMA_ADDR_T_64BIT
	def_bool y

config NEED_DMA_MAP_STATE
	def_bool y

config NEED_SG_DMA_LENGTH
	def_bool y

215 216 217
config SMP
	def_bool y

C
Catalin Marinas 已提交
218 219 220 221 222 223
config SWIOTLB
	def_bool y

config IOMMU_HELPER
	def_bool SWIOTLB

224 225 226
config KERNEL_MODE_NEON
	def_bool y

227 228 229
config FIX_EARLYCON_MEM
	def_bool y

230 231
config PGTABLE_LEVELS
	int
S
Suzuki K. Poulose 已提交
232
	default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
233 234 235
	default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
	default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
236 237
	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
238

C
Catalin Marinas 已提交
239 240 241 242
source "init/Kconfig"

source "kernel/Kconfig.freezer"

O
Olof Johansson 已提交
243
source "arch/arm64/Kconfig.platforms"
C
Catalin Marinas 已提交
244 245 246

menu "Bus support"

247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264
config PCI
	bool "PCI support"
	help
	  This feature enables support for PCI bus system. If you say Y
	  here, the kernel will include drivers and infrastructure code
	  to support PCI bus devices.

config PCI_DOMAINS
	def_bool PCI

config PCI_DOMAINS_GENERIC
	def_bool PCI

config PCI_SYSCALL
	def_bool PCI

source "drivers/pci/Kconfig"

C
Catalin Marinas 已提交
265 266 267 268
endmenu

menu "Kernel Features"

269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368
menu "ARM errata workarounds via the alternatives framework"

config ARM64_ERRATUM_826319
	bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted"
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or
	  AXI master interface and an L2 cache.

	  If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors
	  and is unable to accept a certain write via this interface, it will
	  not progress on read data presented on the read data channel and the
	  system can deadlock.

	  The workaround promotes data cache clean instructions to
	  data cache clean-and-invalidate.
	  Please note that this does not necessarily enable the workaround,
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_ERRATUM_827319
	bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect"
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI
	  master interface and an L2 cache.

	  Under certain conditions this erratum can cause a clean line eviction
	  to occur at the same time as another transaction to the same address
	  on the AMBA 5 CHI interface, which can cause data corruption if the
	  interconnect reorders the two transactions.

	  The workaround promotes data cache clean instructions to
	  data cache clean-and-invalidate.
	  Please note that this does not necessarily enable the workaround,
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_ERRATUM_824069
	bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop"
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected
	  to a coherent interconnect.

	  If a Cortex-A53 processor is executing a store or prefetch for
	  write instruction at the same time as a processor in another
	  cluster is executing a cache maintenance operation to the same
	  address, then this erratum might cause a clean cache line to be
	  incorrectly marked as dirty.

	  The workaround promotes data cache clean instructions to
	  data cache clean-and-invalidate.
	  Please note that this option does not necessarily enable the
	  workaround, as it depends on the alternative framework, which will
	  only patch the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_ERRATUM_819472
	bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption"
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache
	  present when it is connected to a coherent interconnect.

	  If the processor is executing a load and store exclusive sequence at
	  the same time as a processor in another cluster is executing a cache
	  maintenance operation to the same address, then this erratum might
	  cause data corruption.

	  The workaround promotes data cache clean instructions to
	  data cache clean-and-invalidate.
	  Please note that this does not necessarily enable the workaround,
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_ERRATUM_832075
	bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads"
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 832075 on Cortex-A57 parts up to r1p2.

	  Affected Cortex-A57 parts might deadlock when exclusive load/store
	  instructions to Write-Back memory are mixed with Device loads.

	  The workaround is to promote device loads to use Load-Acquire
	  semantics.
	  Please note that this does not necessarily enable the workaround,
369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

config ARM64_ERRATUM_834220
	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
	depends on KVM
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 834220 on Cortex-A57 parts up to r1p2.

	  Affected Cortex-A57 parts might report a Stage 2 translation
	  fault as the result of a Stage 1 fault for load crossing a
	  page boundary when there is a permission or device memory
	  alignment fault at Stage 1 and a translation fault at Stage 2.

	  The workaround is to verify that the Stage 1 translation
	  doesn't generate a fault before handling the Stage 2 fault.
	  Please note that this does not necessarily enable the workaround,
390 391 392 393 394
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415
config ARM64_ERRATUM_845719
	bool "Cortex-A53: 845719: a load might read incorrect data"
	depends on COMPAT
	default y
	help
	  This option adds an alternative code sequence to work around ARM
	  erratum 845719 on Cortex-A53 parts up to r0p4.

	  When running a compat (AArch32) userspace on an affected Cortex-A53
	  part, a load at EL0 from a virtual address that matches the bottom 32
	  bits of the virtual address used by a recent load at (AArch64) EL1
	  might return incorrect data.

	  The workaround is to write the contextidr_el1 register on exception
	  return to a 32-bit task.
	  Please note that this does not necessarily enable the workaround,
	  as it depends on the alternative framework, which will only patch
	  the kernel if an affected CPU is detected.

	  If unsure, say Y.

416 417 418 419
config ARM64_ERRATUM_843419
	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
	depends on MODULES
	default y
420
	select ARM64_MODULE_CMODEL_LARGE
421 422 423 424 425 426 427 428 429 430 431 432
	help
	  This option builds kernel modules using the large memory model in
	  order to avoid the use of the ADRP instruction, which can cause
	  a subsequent memory access to use an incorrect address on Cortex-A53
	  parts up to r0p4.

	  Note that the kernel itself must be linked with a version of ld
	  which fixes potentially affected ADRP instructions through the
	  use of veneers.

	  If unsure, say Y.

433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449
config CAVIUM_ERRATUM_22375
	bool "Cavium erratum 22375, 24313"
	default y
	help
	  Enable workaround for erratum 22375, 24313.

	  This implements two gicv3-its errata workarounds for ThunderX. Both
	  with small impact affecting only ITS table allocation.

	    erratum 22375: only alloc 8MB table size
	    erratum 24313: ignore memory access type

	  The fixes are in ITS initialization and basically ignore memory access
	  type and table size provided by the TYPER and BASER registers.

	  If unsure, say Y.

450 451 452 453 454 455 456 457 458
config CAVIUM_ERRATUM_23144
	bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
	depends on NUMA
	default y
	help
	  ITS SYNC command hang for cross node io and collections/cpu mapping.

	  If unsure, say Y.

459 460 461 462 463 464 465 466 467 468
config CAVIUM_ERRATUM_23154
	bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
	default y
	help
	  The gicv3 of ThunderX requires a modified version for
	  reading the IAR status to ensure data synchronization
	  (access to icc_iar1_el1 is not sync'ed before and after).

	  If unsure, say Y.

469 470 471 472 473 474 475 476 477 478 479
config CAVIUM_ERRATUM_27456
	bool "Cavium erratum 27456: Broadcast TLBI instructions may cause icache corruption"
	default y
	help
	  On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
	  instructions may cause the icache to become corrupted if it
	  contains data for a non-current ASID.  The fix is to
	  invalidate the icache when changing the mm context.

	  If unsure, say Y.

480 481 482
endmenu


483 484 485 486 487 488 489 490 491 492 493
choice
	prompt "Page size"
	default ARM64_4K_PAGES
	help
	  Page size (translation granule) configuration.

config ARM64_4K_PAGES
	bool "4KB"
	help
	  This feature enables 4KB pages support.

494 495 496 497 498 499 500
config ARM64_16K_PAGES
	bool "16KB"
	help
	  The system will use 16KB pages support. AArch32 emulation
	  requires applications compiled with 16K (or a multiple of 16K)
	  aligned segments.

C
Catalin Marinas 已提交
501
config ARM64_64K_PAGES
502
	bool "64KB"
C
Catalin Marinas 已提交
503 504 505
	help
	  This feature enables 64KB pages support (4KB by default)
	  allowing only two levels of page tables and faster TLB
506 507
	  look-up. AArch32 emulation requires applications compiled
	  with 64K aligned segments.
C
Catalin Marinas 已提交
508

509 510 511 512 513
endchoice

choice
	prompt "Virtual address space size"
	default ARM64_VA_BITS_39 if ARM64_4K_PAGES
514
	default ARM64_VA_BITS_47 if ARM64_16K_PAGES
515 516 517 518 519 520
	default ARM64_VA_BITS_42 if ARM64_64K_PAGES
	help
	  Allows choosing one of multiple possible virtual address
	  space sizes. The level of translation table is determined by
	  a combination of page size and virtual address space size.

S
Suzuki K. Poulose 已提交
521
config ARM64_VA_BITS_36
522
	bool "36-bit" if EXPERT
S
Suzuki K. Poulose 已提交
523 524
	depends on ARM64_16K_PAGES

525 526 527 528 529 530 531 532
config ARM64_VA_BITS_39
	bool "39-bit"
	depends on ARM64_4K_PAGES

config ARM64_VA_BITS_42
	bool "42-bit"
	depends on ARM64_64K_PAGES

533 534 535 536
config ARM64_VA_BITS_47
	bool "47-bit"
	depends on ARM64_16K_PAGES

537 538 539
config ARM64_VA_BITS_48
	bool "48-bit"

540 541 542 543
endchoice

config ARM64_VA_BITS
	int
S
Suzuki K. Poulose 已提交
544
	default 36 if ARM64_VA_BITS_36
545 546
	default 39 if ARM64_VA_BITS_39
	default 42 if ARM64_VA_BITS_42
547
	default 47 if ARM64_VA_BITS_47
548
	default 48 if ARM64_VA_BITS_48
549

550 551 552 553 554
config CPU_BIG_ENDIAN
       bool "Build big-endian kernel"
       help
         Say Y if you plan on running a kernel in big-endian mode.

555 556 557 558 559 560 561 562 563 564 565 566 567 568
config SCHED_MC
	bool "Multi-core scheduler support"
	help
	  Multi-core scheduler support improves the CPU scheduler's decision
	  making when dealing with multi-core CPU chips at a cost of slightly
	  increased overhead in some places. If unsure say N here.

config SCHED_SMT
	bool "SMT scheduler support"
	help
	  Improves the CPU scheduler's decision making when dealing with
	  MultiThreading at a cost of slightly increased overhead in some
	  places. If unsure say N here.

C
Catalin Marinas 已提交
569
config NR_CPUS
570 571
	int "Maximum number of CPUs (2-4096)"
	range 2 4096
572
	# These have to remain sorted largest to smallest
573
	default "64"
C
Catalin Marinas 已提交
574

575 576
config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
577
	select GENERIC_IRQ_MIGRATION
578 579 580 581
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605
# Common NUMA Features
config NUMA
	bool "Numa Memory Allocation and Scheduler Support"
	depends on SMP
	help
	  Enable NUMA (Non Uniform Memory Access) support.

	  The kernel will try to allocate memory used by a CPU on the
	  local memory of the CPU and add some more
	  NUMA awareness to the kernel.

config NODES_SHIFT
	int "Maximum NUMA Nodes (as a power of 2)"
	range 1 10
	default "2"
	depends on NEED_MULTIPLE_NODES
	help
	  Specify the maximum number of NUMA Nodes available on the target
	  system.  Increases memory reserved to accommodate various tables.

config USE_PERCPU_NUMA_NODE_ID
	def_bool y
	depends on NUMA

C
Catalin Marinas 已提交
606
source kernel/Kconfig.preempt
607
source kernel/Kconfig.hz
C
Catalin Marinas 已提交
608

609
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
610
	depends on !HIBERNATION
611 612
	def_bool y

C
Catalin Marinas 已提交
613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629
config ARCH_HAS_HOLES_MEMORYMODEL
	def_bool y if SPARSEMEM

config ARCH_SPARSEMEM_ENABLE
	def_bool y
	select SPARSEMEM_VMEMMAP_ENABLE

config ARCH_SPARSEMEM_DEFAULT
	def_bool ARCH_SPARSEMEM_ENABLE

config ARCH_SELECT_MEMORY_MODEL
	def_bool ARCH_SPARSEMEM_ENABLE

config HAVE_ARCH_PFN_VALID
	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM

config HW_PERF_EVENTS
630 631
	def_bool y
	depends on ARM_PMU
C
Catalin Marinas 已提交
632

S
Steve Capper 已提交
633 634 635 636
config SYS_SUPPORTS_HUGETLBFS
	def_bool y

config ARCH_WANT_HUGE_PMD_SHARE
S
Suzuki K. Poulose 已提交
637
	def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
S
Steve Capper 已提交
638

639 640 641
config ARCH_HAS_CACHE_LINE_SIZE
	def_bool y

C
Catalin Marinas 已提交
642 643
source "mm/Kconfig"

A
AKASHI Takahiro 已提交
644 645 646 647 648 649 650 651 652 653 654 655 656
config SECCOMP
	bool "Enable seccomp to safely compute untrusted bytecode"
	---help---
	  This kernel feature is useful for number crunching applications
	  that may need to compute untrusted bytecode during their
	  execution. By using pipes or other transports made available to
	  the process as file descriptors supporting the read/write
	  syscalls, it's possible to isolate those applications in
	  their own address space using seccomp. Once seccomp is
	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
	  and the task is only allowed to execute a few safe syscalls
	  defined by each seccomp mode.

657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675
config PARAVIRT
	bool "Enable paravirtualization code"
	help
	  This changes the kernel so it can modify itself when it is run
	  under a hypervisor, potentially improving performance significantly
	  over full virtualization.

config PARAVIRT_TIME_ACCOUNTING
	bool "Paravirtual steal time accounting"
	select PARAVIRT
	default n
	help
	  Select this option to enable fine granularity task steal time
	  accounting. Time spent executing other tasks in parallel with
	  the current vCPU is discounted from the vCPU power. To account for
	  that, there can be a small performance impact.

	  If in doubt, say N here.

676 677 678 679 680 681 682 683 684 685
config KEXEC
	depends on PM_SLEEP_SMP
	select KEXEC_CORE
	bool "kexec system call"
	---help---
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
	  but it is independent of the system firmware.   And like a reboot
	  you can start any kernel with it, not just Linux.

686 687 688 689 690
config XEN_DOM0
	def_bool y
	depends on XEN

config XEN
691
	bool "Xen guest support on ARM64"
692
	depends on ARM64 && OF
693
	select SWIOTLB_XEN
694
	select PARAVIRT
695 696 697
	help
	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.

698 699 700
config FORCE_MAX_ZONEORDER
	int
	default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
701
	default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
702
	default "11"
703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719
	help
	  The kernel memory allocator divides physically contiguous memory
	  blocks into "zones", where each zone is a power of two number of
	  pages.  This option selects the largest power of two that the kernel
	  keeps in the memory allocator.  If you need to allocate very large
	  blocks of physically contiguous memory, then you may need to
	  increase this value.

	  This config option is actually maximum order plus one. For example,
	  a value of 11 means that the largest free memory block is 2^10 pages.

	  We make sure that we can allocate upto a HugePage size for each configuration.
	  Hence we have :
		MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2

	  However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
	  4M allocations matching the default size used by generic code.
720

721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770
menuconfig ARMV8_DEPRECATED
	bool "Emulate deprecated/obsolete ARMv8 instructions"
	depends on COMPAT
	help
	  Legacy software support may require certain instructions
	  that have been deprecated or obsoleted in the architecture.

	  Enable this config to enable selective emulation of these
	  features.

	  If unsure, say Y

if ARMV8_DEPRECATED

config SWP_EMULATION
	bool "Emulate SWP/SWPB instructions"
	help
	  ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
	  they are always undefined. Say Y here to enable software
	  emulation of these instructions for userspace using LDXR/STXR.

	  In some older versions of glibc [<=2.8] SWP is used during futex
	  trylock() operations with the assumption that the code will not
	  be preempted. This invalid assumption may be more likely to fail
	  with SWP emulation enabled, leading to deadlock of the user
	  application.

	  NOTE: when accessing uncached shared regions, LDXR/STXR rely
	  on an external transaction monitoring block called a global
	  monitor to maintain update atomicity. If your system does not
	  implement a global monitor, this option can cause programs that
	  perform SWP operations to uncached memory to deadlock.

	  If unsure, say Y

config CP15_BARRIER_EMULATION
	bool "Emulate CP15 Barrier instructions"
	help
	  The CP15 barrier instructions - CP15ISB, CP15DSB, and
	  CP15DMB - are deprecated in ARMv8 (and ARMv7). It is
	  strongly recommended to use the ISB, DSB, and DMB
	  instructions instead.

	  Say Y here to enable software emulation of these
	  instructions for AArch32 userspace code. When this option is
	  enabled, CP15 barrier usage is traced which can help
	  identify software that needs updating.

	  If unsure, say Y

771 772 773 774 775 776 777 778 779 780 781 782 783 784 785
config SETEND_EMULATION
	bool "Emulate SETEND instruction"
	help
	  The SETEND instruction alters the data-endianness of the
	  AArch32 EL0, and is deprecated in ARMv8.

	  Say Y here to enable software emulation of the instruction
	  for AArch32 userspace code.

	  Note: All the cpus on the system must have mixed endian support at EL0
	  for this feature to be enabled. If a new CPU - which doesn't support mixed
	  endian - is hotplugged in after this feature has been enabled, there could
	  be unexpected results in the applications.

	  If unsure, say Y
786 787
endif

788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
menu "ARMv8.1 architectural features"

config ARM64_HW_AFDBM
	bool "Support for hardware updates of the Access and Dirty page flags"
	default y
	help
	  The ARMv8.1 architecture extensions introduce support for
	  hardware updates of the access and dirty information in page
	  table entries. When enabled in TCR_EL1 (HA and HD bits) on
	  capable processors, accesses to pages with PTE_AF cleared will
	  set this bit instead of raising an access flag fault.
	  Similarly, writes to read-only pages with the DBM bit set will
	  clear the read-only bit (AP[2]) instead of raising a
	  permission fault.

	  Kernels built with this configuration option enabled continue
	  to work on pre-ARMv8.1 hardware and the performance impact is
	  minimal. If unsure, say Y.

config ARM64_PAN
	bool "Enable support for Privileged Access Never (PAN)"
	default y
	help
	 Privileged Access Never (PAN; part of the ARMv8.1 Extensions)
	 prevents the kernel or hypervisor from accessing user-space (EL0)
	 memory directly.

	 Choosing this option will cause any unprotected (not using
	 copy_to_user et al) memory access to fail with a permission fault.

	 The feature is detected at runtime, and will remain as a 'nop'
	 instruction if the cpu does not implement the feature.

config ARM64_LSE_ATOMICS
	bool "Atomic instructions"
	help
	  As part of the Large System Extensions, ARMv8.1 introduces new
	  atomic instructions that are designed specifically to scale in
	  very large systems.

	  Say Y here to make use of these instructions for the in-kernel
	  atomic routines. This incurs a small overhead on CPUs that do
	  not support these instructions and requires the kernel to be
	  built with binutils >= 2.25.

833 834 835 836 837 838 839 840 841 842 843 844 845
config ARM64_VHE
	bool "Enable support for Virtualization Host Extensions (VHE)"
	default y
	help
	  Virtualization Host Extensions (VHE) allow the kernel to run
	  directly at EL2 (instead of EL1) on processors that support
	  it. This leads to better performance for KVM, as they reduce
	  the cost of the world switch.

	  Selecting this option allows the VHE feature to be detected
	  at runtime, and does not affect processors that do not
	  implement this feature.

846 847
endmenu

848 849
menu "ARMv8.2 architectural features"

850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870
config ARM64_UAO
	bool "Enable support for User Access Override (UAO)"
	default y
	help
	  User Access Override (UAO; part of the ARMv8.2 Extensions)
	  causes the 'unprivileged' variant of the load/store instructions to
	  be overriden to be privileged.

	  This option changes get_user() and friends to use the 'unprivileged'
	  variant of the load/store instructions. This ensures that user-space
	  really did have access to the supplied memory. When addr_limit is
	  set to kernel memory the UAO bit will be set, allowing privileged
	  access to kernel memory.

	  Choosing this option will cause copy_to_user() et al to use user-space
	  memory permissions.

	  The feature is detected at runtime, the kernel will use the
	  regular load/store instructions if the cpu does not implement the
	  feature.

871 872
endmenu

873 874 875 876 877 878 879 880
config ARM64_MODULE_CMODEL_LARGE
	bool

config ARM64_MODULE_PLTS
	bool
	select ARM64_MODULE_CMODEL_LARGE
	select HAVE_MOD_ARCH_SPECIFIC

881 882 883 884 885 886 887 888 889 890 891
config RELOCATABLE
	bool
	help
	  This builds the kernel as a Position Independent Executable (PIE),
	  which retains all relocation metadata required to relocate the
	  kernel binary at runtime to a different virtual address than the
	  address it was linked at.
	  Since AArch64 uses the RELA relocation format, this requires a
	  relocation pass at runtime even if the kernel is loaded at the
	  same address it was linked at.

892 893
config RANDOMIZE_BASE
	bool "Randomize the address of the kernel image"
894
	select ARM64_MODULE_PLTS if MODULES
895 896 897 898 899 900 901 902 903
	select RELOCATABLE
	help
	  Randomizes the virtual address at which the kernel image is
	  loaded, as a security feature that deters exploit attempts
	  relying on knowledge of the location of kernel internals.

	  It is the bootloader's job to provide entropy, by passing a
	  random u64 value in /chosen/kaslr-seed at kernel entry.

904 905 906 907 908
	  When booting via the UEFI stub, it will invoke the firmware's
	  EFI_RNG_PROTOCOL implementation (if available) to supply entropy
	  to the kernel proper. In addition, it will randomise the physical
	  location of the kernel Image as well.

909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925
	  If unsure, say N.

config RANDOMIZE_MODULE_REGION_FULL
	bool "Randomize the module region independently from the core kernel"
	depends on RANDOMIZE_BASE
	default y
	help
	  Randomizes the location of the module region without considering the
	  location of the core kernel. This way, it is impossible for modules
	  to leak information about the location of core kernel data structures
	  but it does imply that function calls between modules and the core
	  kernel will need to be resolved via veneers in the module PLT.

	  When this option is not set, the module region will be randomized over
	  a limited range that contains the [_stext, _etext] interval of the
	  core kernel, so branch relocations are always in range.

C
Catalin Marinas 已提交
926 927 928 929
endmenu

menu "Boot options"

930 931 932 933 934 935 936 937 938
config ARM64_ACPI_PARKING_PROTOCOL
	bool "Enable support for the ARM64 ACPI parking protocol"
	depends on ACPI
	help
	  Enable support for the ARM64 ACPI parking protocol. If disabled
	  the kernel will not allow booting through the ARM64 ACPI parking
	  protocol even if the corresponding data is present in the ACPI
	  MADT table.

C
Catalin Marinas 已提交
939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954
config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  Provide a set of default command-line options at build time by
	  entering them here. As a minimum, you should specify the the
	  root device (e.g. root=/dev/nfs).

config CMDLINE_FORCE
	bool "Always use the default kernel command string"
	help
	  Always use the default kernel command string, even if the boot
	  loader passes other arguments to the kernel.
	  This is useful if you cannot or don't want to change the
	  command-line options your boot loader passes to the kernel.

955 956 957
config EFI_STUB
	bool

M
Mark Salter 已提交
958 959 960 961 962 963
config EFI
	bool "UEFI runtime support"
	depends on OF && !CPU_BIG_ENDIAN
	select LIBFDT
	select UCS2_STRING
	select EFI_PARAMS_FROM_FDT
964
	select EFI_RUNTIME_WRAPPERS
965 966
	select EFI_STUB
	select EFI_ARMSTUB
M
Mark Salter 已提交
967 968 969 970
	default y
	help
	  This option provides support for runtime services provided
	  by UEFI firmware (such as non-volatile variables, realtime
M
Mark Salter 已提交
971 972 973
          clock, and platform reset). A UEFI stub is also provided to
	  allow the kernel to be booted as an EFI application. This
	  is only useful on systems that have UEFI firmware.
M
Mark Salter 已提交
974

Y
Yi Li 已提交
975 976 977 978 979 980 981 982 983 984 985
config DMI
	bool "Enable support for SMBIOS (DMI) tables"
	depends on EFI
	default y
	help
	  This enables SMBIOS/DMI feature for systems.

	  This option is only useful on systems that have UEFI firmware.
	  However, even with this option, the resultant kernel should
	  continue to boot on existing non-UEFI platforms.

C
Catalin Marinas 已提交
986 987 988 989 990 991 992 993
endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config COMPAT
	bool "Kernel support for 32-bit EL0"
994
	depends on ARM64_4K_PAGES || EXPERT
C
Catalin Marinas 已提交
995
	select COMPAT_BINFMT_ELF
996
	select HAVE_UID16
997
	select OLD_SIGSUSPEND3
998
	select COMPAT_OLD_SIGACTION
C
Catalin Marinas 已提交
999 1000 1001 1002 1003 1004
	help
	  This option enables support for a 32-bit EL0 running under a 64-bit
	  kernel at EL1. AArch32-specific components such as system calls,
	  the user helper functions, VFP support and the ptrace interface are
	  handled appropriately by the kernel.

1005 1006 1007
	  If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
	  that you will only be able to execute AArch32 binaries that were compiled
	  with page size aligned segments.
1008

C
Catalin Marinas 已提交
1009 1010 1011 1012 1013 1014 1015 1016
	  If you want to execute 32-bit userspace applications, say Y.

config SYSVIPC_COMPAT
	def_bool y
	depends on COMPAT && SYSVIPC

endmenu

1017 1018 1019 1020
menu "Power management options"

source "kernel/power/Kconfig"

1021 1022 1023 1024 1025 1026 1027 1028
config ARCH_HIBERNATION_POSSIBLE
	def_bool y
	depends on CPU_PM

config ARCH_HIBERNATION_HEADER
	def_bool y
	depends on HIBERNATION

1029 1030 1031 1032 1033
config ARCH_SUSPEND_POSSIBLE
	def_bool y

endmenu

1034 1035 1036 1037
menu "CPU Power Management"

source "drivers/cpuidle/Kconfig"

1038 1039 1040 1041
source "drivers/cpufreq/Kconfig"

endmenu

C
Catalin Marinas 已提交
1042 1043 1044 1045
source "net/Kconfig"

source "drivers/Kconfig"

M
Mark Salter 已提交
1046 1047
source "drivers/firmware/Kconfig"

1048 1049
source "drivers/acpi/Kconfig"

C
Catalin Marinas 已提交
1050 1051
source "fs/Kconfig"

M
Marc Zyngier 已提交
1052 1053
source "arch/arm64/kvm/Kconfig"

C
Catalin Marinas 已提交
1054 1055 1056 1057 1058
source "arch/arm64/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"
1059 1060 1061
if CRYPTO
source "arch/arm64/crypto/Kconfig"
endif
C
Catalin Marinas 已提交
1062 1063

source "lib/Kconfig"